CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were ...CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/ CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.展开更多
Ce-Zr-Al-Nd2O3 （CZAN） support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction （XRD）, low temperature nitrogen adsorption-desorption,...Ce-Zr-Al-Nd2O3 （CZAN） support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction （XRD）, low temperature nitrogen adsorption-desorption, oxygen pulsing technique, H2-temperamre programmed reduction （H2-TPR） and X-ray photoelectron spectroscopy （XPS）. The Pd-only three-way catalysts （Pd-TWC） supported on these materials were prepared by incipient wetness method and studied by activity tests. The results demonstrated that the CZAN supports obtained by the two methods showed better structural, textural and redox properties than the CZA without Nd2O3, and the addition of Nd203 improved the catalytic activity of TWC. Especially, the CZAN-i support prepared by impregnation method had better thermal stability and redox property. Meanwhile, the Pd/CZAN-i catalyst exhibited the best catalytic performance. XPS measurements indicated that the Nd-modified samples possessed more Ce3＋ and oxygen vacancies on the surface of samples, which led to a better redox property. The excellent redox property of support materials helped to improve the catalytic activity of TWC.展开更多
The electrocatalytic activity and stability of Pt/C catalyst modified by using CeO_2-ZrO_2 mixed oxides for the alcohols electrochemical oxidation as probes were investigated. The catalyst samples were characterized b...The electrocatalytic activity and stability of Pt/C catalyst modified by using CeO_2-ZrO_2 mixed oxides for the alcohols electrochemical oxidation as probes were investigated. The catalyst samples were characterized by X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The electrochemical properties were measured by a three electrode system on electrochemical workstation（IVIUM）. The results showed that the presence of CeO_2-ZrO_2 might be associated with the presence of Pt, which indicated that possibly there was synergistic effect between CeO_2-ZrO_2 and Pt nanoparticles. The electrocatalytic activity and stability of Pt-MO_x/C（M=Ce, Zr） for methanol and ethanol oxidation was better than that of Pt-CeO_2/C, which was attributed to that CeO_2-ZrO_2 composited oxides enhanced oxygen mobility and promoted oxygen storage capacity（OSC）. Furthermore, the best performance was found when the molar ratio of CeO_2 to ZrO_2 was 2：1 for the oxidation of methanol and ethanol. The forward peak current density of Pt-MO_x/C（M=Ce, Zr, Ce：Zr=2：1） towards the methanol electrooxidation was about 3.8 times that of Pt-CeO_2/C. Pt-MO_x/C（M=Ce, Zr） appeared to be a promising and less expensive methanol oxidation anode catalyst.展开更多
The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that ei...The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that either CuO or CeO 2 ac tivity is quite low for CO oxidation. However, when CuO and CeO 2 are mixed, the oxidative activity of the catalyst increases significantly, probably owing to the valency status of copper species (Cu 2+ and Cu+) on the CeO 2 surfa ce, the dispersion and reducibility. XPS surface analysis shows that CuO loading is very important in forming of either Cu 2+ or Cu+. Rietveld analysis s hows that some CuO, which has smaller ion radius than Ce 4+, enters the Ce O 2 lattice after CuO and CeO 2 are mixed. When the CuO loading reaches 5.0%, the size of CuO crystals is a minimum (6.1 nm) and the micro-strain value i s a maximum (2.86×10 -3), resulting in high surface energy and the best ac tivity for CO oxidation.展开更多
In this work, we have reported the influence of the addition of base （KOH） on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Further...In this work, we have reported the influence of the addition of base （KOH） on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Furthermore, the prepared CeO2 was used as the support to prepare CuO/CeO2 catalysts via the wet impregnation method. The samples were characterized by N2 adsorption-desorption, X-ray powder diffraction （XRD）, high resolution transmission electron microscopy （HRTEM）, and temperatureprogrammed reduction by H2 （H2-TPR）. The catalytic properties of the CuO/CeO2 catalysts for lowtemperature CO oxidation were studied using a microreactor-GC system. The crystal size of CeO2-A was much smaller than that of CeO2-B, and the corresponding copper oxide catalysts exhibited higher catalytic activity than that of the CeO2-B-supported catalysts under the same reaction conditions. The alcohothermal mechanism indicated that KOH plays a key role in determining the physicochemical and catalytic properties of ceria-based materials.展开更多
Cu/CeO2-ZrO2 catalysts for water-gas shift （WGS） reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of...Cu/CeO2-ZrO2 catalysts for water-gas shift （WGS） reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of N2 physical adsorption analysis, XRD and H2-TPR. The results indicate that the BET surface areas of the catalysts are increased in varying degrees due to the presence of ZrO2. With increasing ZrO2 content, the pore size distribution is centered on 1.9 nm. ZrO2 can efficiently restrain the growth of Cu crystal particles. The appropriate amount of ZrO2 in the Cu/CeO2 catalysts can help the catalyst keep better copper dispersion in the WGS reaction, which can lead to both higher catalytic activity and better thermal stability. When ZrO2 content is 10% （atom fraction）, Cu/CeO2-Zr02 catalyst reaches a CO conversion rate of 73.7% at the reaction temperature of 200℃.展开更多
This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 cata...This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 catalysts with yttrium content in the range of 0-5wt.%. Properties of the obtained samples were characterized and analyzed by X-ray diffraction （XRD）, Raman spectroscopy, H2-TPR, cyclic voltammetry （CV） and the BET method. The results revealed that catalytic activity was increased with the yttrium content at first, but then decreased with the further increase of yttrium content. Herein, CuO/CeO2 catalyst doped with 2wt.% of yttrium showed the highest catalytic activity （CO conversion reaches 93.4% at 250 ℃） and thermal stability for WGS reaction. The catalytic activity was correlated with the surface area, the area of peak γ of H2-TPR profile （i.e., the reduction of surface copper oxide （crystalline forms） interacted with surface oxygen vacancies on ceria）, and the area of peak C2 and A1 （Cu^0→←Cu^2＋ in cyclic voltammetry process）, respectively. Besides, Raman spectra provided evidences for a synergistic Cu-Ovacancy interaction, and it was indicated that doping yttrium may facilitate the formation of oxygen vacancies on ceria.展开更多
The noble metals (Pt, Pd, Rh) supported on Cu-Ce mixed oxides with γ-Al2O3 washcoat/FeCrAl substrate were investigated as catalytic performance of Three Way Catalysts (TWC) under simulated automotive exhaust feed gas...The noble metals (Pt, Pd, Rh) supported on Cu-Ce mixed oxides with γ-Al2O3 washcoat/FeCrAl substrate were investigated as catalytic performance of Three Way Catalysts (TWC) under simulated automotive exhaust feed gas. The structural, morphological features and catalytic activity were observed by X-ray diffractometry (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) and GC-TCD (Varian CP-4900). The catalytic performance of noble metals (Pt, Rh, Pd) supported on Cu-Ce mixed oxides with γ-Al2O3 washcoat/FeCrAl substrate was be compared with noble metals (Pt, Rh, Pd) supported on Ce-Zr mixed oxides with γ-Al2O3 washcoat/FeCrAl substrate and only γ-Al2O3 washcoat/FeCrAl substrate at various stoichiometric ratio of oxygen. The results showed that the addition of Cu-Ce mixed oxides improved CO oxidation reaction at lower temperature during stable lambda of 1, the highest CO conversion of 99% is observed for the noble metals (Pt, Pd, Rh) support on Cu-Ce with γ-Al2O3 washcoat/FeCrAl substrate. The results also showed that, the addition of Cu-Ce mixed oxides promoted released oxygen, thus it improved strongly CO and C3H8 conversion at lean oxygen stoichiometric operation.展开更多
The CuO/CeO2 catalysts were investigated by means of X-ray diffraction （XRD）, laser Raman spectroscopy （LRS）, X-ray photoelectronic spectroscopy （XPS）, temperature-programmed reduction （TPR）, in situ Fourier t...The CuO/CeO2 catalysts were investigated by means of X-ray diffraction （XRD）, laser Raman spectroscopy （LRS）, X-ray photoelectronic spectroscopy （XPS）, temperature-programmed reduction （TPR）, in situ Fourier transform infrared spectroscopy （FTIR） and NO＋CO reaction. The results revealed that the low temperature （〈150℃） catalytic performances were enhanced for CO pretreated samples. During CO pretreatment, the surface Cu＋/Cu0 and oxygen vacancies on ceria surface were present. The low va- lence copper species activated the adsorbed CO and surface oxygen vacancies facilitated the NO dissociation. These effects in turn led to higher activities of CuO/CeO2 for NO reduction. The current study provided helpful understandings of active sites and reaction mechanism in NO＋CO reaction.展开更多
Nanometer SnO2 particles were synthesized by sol-gel dialytic processes and used as a support to prepare CuO supported catalysts via a deposition-precipitation method. The samples were characterized by means of TG-DTA...Nanometer SnO2 particles were synthesized by sol-gel dialytic processes and used as a support to prepare CuO supported catalysts via a deposition-precipitation method. The samples were characterized by means of TG-DTA, XRD, H2-TPR and XPS. The catalytic activity of the CuO/TiO2-SnO2 catalysts was markedly depended on the loading of CuO, and the optimum CuO loading was 8 wt.% （Tloo = 80 ℃）. The CuO/TiO2-SnO2 catalysts exhibited much higher catalytic activity than the CuO/TiO2 and CuO/SnO2 catalysts. H2-TPR result indicated that a large amount of CuO formed the active site for CO oxidation in 8 wt.% CuO/TiO2-SnO2 catalyst.展开更多
Three series of CeO2/CuO samples were prepared by impregnation method and characterized by XRD, N2 adsorption-desorption, temperatureprogrammed reduction （TPR）, XPS and TEM techniques. In comparison with the samples...Three series of CeO2/CuO samples were prepared by impregnation method and characterized by XRD, N2 adsorption-desorption, temperatureprogrammed reduction （TPR）, XPS and TEM techniques. In comparison with the samples prepared with CuO as initial support, the samples with Cu（OH）2 as initial support have higher reducibilities and smaller relative TPR peak areas, and also larger specific surface areas at calcina- tion temperatures of 400 ℃--600 ℃. As a result, Cu（OH）2 is better than CuO as initial support for preferential oxidation of CO in excess H2 （CO-PROX）. The best catalytic performance was achieved on the sample calcined at 600 ℃ and with an atomic ratio of Ce/Cu at 40%. XPS analyses indicate that more interface linkages Ce-O-Cu could be formed when it was calcined at 600 ℃. And the atomic ratio of Ce/Cu at 40% led to a proper reducibility for the sample as illustrated by the TPR measurements.展开更多
CeO2-ZeO2 solid solutions are extensively used as oxygen storage promoters in the current automotive three-way catalysts. High thermal stability of the textural properties is one of the most important requirements for...CeO2-ZeO2 solid solutions are extensively used as oxygen storage promoters in the current automotive three-way catalysts. High thermal stability of the textural properties is one of the most important requirements for practical application since temperatures up to 1273 K are easily experienced by these materials under real working conditions. In the present paper, we investigated how hydrothermal treatments applied to cakes of doped and undoped ZrO2-rich CeO2-ZrO2 precursors might improve the thermal stability of the final CeO2-ZrO2 solid solution. A rationale was developed that allowed to correlate the morphology of the hydrothermaUy treated cake with the thermal stability at 1273 K of the final product, which did not depend on the composition of the mixed oxides.展开更多
A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic re...A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic reduction（SCR） performance and SO2-resistant ability of TiO2-SiO2-WO3 were greatly enhanced by the introduction of cerium. The catalyst containing 10% CeO2 showed the highest NO conversion in a wide temperature range and good N2 selectivity with broad operation temperature window at the gas hourly space velocity（GHSV） of 30000 h–1, which was a very promising catalyst for NOx abatement from diesel engine exhaust. The catalysts were characterized by X-ray diffraction（XRD）, scanning electron microscopy with energy dispersive X-ray spectroscopy（SEM-EDS）, N2 adsorption-desorption（BET） and X-ray photoelectron spectroscopy（XPS）. The characterization results showed that the bigger pore radius, higher surface atomic concentration and dispersion of Ce and the abundant adsorbed oxygen on the surface of catalyst contributed to the best NH3-SCR performance of CeO2/TiO2-SiO2-WO3 catalyst containing 10% CeO2.展开更多
Nickel catalysts supported on CeO2-ZrO2-CeO2,ZrO2-Al2O3 and Al2O3 were prepared and characterized by means of X-ray diffraction（XRD）,BET areas,H2 temperature-programmed reduction（H2-TPR）,and X-ray photoelectron sp...Nickel catalysts supported on CeO2-ZrO2-CeO2,ZrO2-Al2O3 and Al2O3 were prepared and characterized by means of X-ray diffraction（XRD）,BET areas,H2 temperature-programmed reduction（H2-TPR）,and X-ray photoelectron spectroscopy（XPS）.Through the test of catalytic partial oxidation of methane（CPOM）,Ni/CeO2-ZrO2-Al2O3 displayed the highest activity,which resulted from its largest BET area and best NiO dispersion.Furthermore,Ni/CeO2-ZrO2-Al2O3 maintained a long-time stability in CPOM,which was attributed to its best coking resistance among all the prepared catalysts.展开更多
The catalytic behaviors of Pd （1.4 wt.%） catalysts supported on CeO2-ZrO2 promoted with La2O3 were investigated for methanol decomposition. The measurements of inductively coupled plasma emission spectroscopy （ICP...The catalytic behaviors of Pd （1.4 wt.%） catalysts supported on CeO2-ZrO2 promoted with La2O3 were investigated for methanol decomposition. The measurements of inductively coupled plasma emission spectroscopy （ICP）, N2 adsorption-desorption （BET）, powder X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and oxygen storage capacity （OSC） were used to characterize the properties of catalysts. The catalysts＇ activities were tested in a fixed bed continuous flow reactor operating under atmospheric pressure. The Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 catalyst exhibited the best activity. The reasons for this were twofold： （1） doping of La improved effectively textural properties of CeO2-ZrO2 oxygen storage materials, and （2） Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 possessed super oxygen storage property and reducibility due to the existence of lattice defect oxygen or mobile oxygen, which helped to re-oxidize zerovalent Pd0 to a partly oxidized Pdδ＋. By introducing 5 wt.%La2O3, the specific surface area of the sample increased, but declined if further increasing the content of La2O3 to 10 wt.%.展开更多
基金Projected supported by the National Natural Science Foundation of China (20271028) and Tianjin Natural Science Foundation(033602511)
文摘CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/ CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.
基金Project supported by National Natural Science Foundation of China (20773090, 20803049)the Specialized Research Fund for the Doctoral Program of Higher Education (20070610026, 200806100009)
文摘Ce-Zr-Al-Nd2O3 （CZAN） support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction （XRD）, low temperature nitrogen adsorption-desorption, oxygen pulsing technique, H2-temperamre programmed reduction （H2-TPR） and X-ray photoelectron spectroscopy （XPS）. The Pd-only three-way catalysts （Pd-TWC） supported on these materials were prepared by incipient wetness method and studied by activity tests. The results demonstrated that the CZAN supports obtained by the two methods showed better structural, textural and redox properties than the CZA without Nd2O3, and the addition of Nd203 improved the catalytic activity of TWC. Especially, the CZAN-i support prepared by impregnation method had better thermal stability and redox property. Meanwhile, the Pd/CZAN-i catalyst exhibited the best catalytic performance. XPS measurements indicated that the Nd-modified samples possessed more Ce3＋ and oxygen vacancies on the surface of samples, which led to a better redox property. The excellent redox property of support materials helped to improve the catalytic activity of TWC.
基金supported by National Natural Science Foundation of China(51474133,21407084)Talent Incubation Funding of School of Materials and Metallurgy(2014CY012)
文摘The electrocatalytic activity and stability of Pt/C catalyst modified by using CeO_2-ZrO_2 mixed oxides for the alcohols electrochemical oxidation as probes were investigated. The catalyst samples were characterized by X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The electrochemical properties were measured by a three electrode system on electrochemical workstation（IVIUM）. The results showed that the presence of CeO_2-ZrO_2 might be associated with the presence of Pt, which indicated that possibly there was synergistic effect between CeO_2-ZrO_2 and Pt nanoparticles. The electrocatalytic activity and stability of Pt-MO_x/C（M=Ce, Zr） for methanol and ethanol oxidation was better than that of Pt-CeO_2/C, which was attributed to that CeO_2-ZrO_2 composited oxides enhanced oxygen mobility and promoted oxygen storage capacity（OSC）. Furthermore, the best performance was found when the molar ratio of CeO_2 to ZrO_2 was 2：1 for the oxidation of methanol and ethanol. The forward peak current density of Pt-MO_x/C（M=Ce, Zr, Ce：Zr=2：1） towards the methanol electrooxidation was about 3.8 times that of Pt-CeO_2/C. Pt-MO_x/C（M=Ce, Zr） appeared to be a promising and less expensive methanol oxidation anode catalyst.
文摘The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that either CuO or CeO 2 ac tivity is quite low for CO oxidation. However, when CuO and CeO 2 are mixed, the oxidative activity of the catalyst increases significantly, probably owing to the valency status of copper species (Cu 2+ and Cu+) on the CeO 2 surfa ce, the dispersion and reducibility. XPS surface analysis shows that CuO loading is very important in forming of either Cu 2+ or Cu+. Rietveld analysis s hows that some CuO, which has smaller ion radius than Ce 4+, enters the Ce O 2 lattice after CuO and CeO 2 are mixed. When the CuO loading reaches 5.0%, the size of CuO crystals is a minimum (6.1 nm) and the micro-strain value i s a maximum (2.86×10 -3), resulting in high surface energy and the best ac tivity for CO oxidation.
文摘In this work, we have reported the influence of the addition of base （KOH） on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Furthermore, the prepared CeO2 was used as the support to prepare CuO/CeO2 catalysts via the wet impregnation method. The samples were characterized by N2 adsorption-desorption, X-ray powder diffraction （XRD）, high resolution transmission electron microscopy （HRTEM）, and temperatureprogrammed reduction by H2 （H2-TPR）. The catalytic properties of the CuO/CeO2 catalysts for lowtemperature CO oxidation were studied using a microreactor-GC system. The crystal size of CeO2-A was much smaller than that of CeO2-B, and the corresponding copper oxide catalysts exhibited higher catalytic activity than that of the CeO2-B-supported catalysts under the same reaction conditions. The alcohothermal mechanism indicated that KOH plays a key role in determining the physicochemical and catalytic properties of ceria-based materials.
文摘Cu/CeO2-ZrO2 catalysts for water-gas shift （WGS） reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of N2 physical adsorption analysis, XRD and H2-TPR. The results indicate that the BET surface areas of the catalysts are increased in varying degrees due to the presence of ZrO2. With increasing ZrO2 content, the pore size distribution is centered on 1.9 nm. ZrO2 can efficiently restrain the growth of Cu crystal particles. The appropriate amount of ZrO2 in the Cu/CeO2 catalysts can help the catalyst keep better copper dispersion in the WGS reaction, which can lead to both higher catalytic activity and better thermal stability. When ZrO2 content is 10% （atom fraction）, Cu/CeO2-Zr02 catalyst reaches a CO conversion rate of 73.7% at the reaction temperature of 200℃.
基金supported by the National Natural Science Foundation of China (20771025)A-type Science and Technology Projects of Fujian Provincial Department of Education (JA08021)
文摘This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 catalysts with yttrium content in the range of 0-5wt.%. Properties of the obtained samples were characterized and analyzed by X-ray diffraction （XRD）, Raman spectroscopy, H2-TPR, cyclic voltammetry （CV） and the BET method. The results revealed that catalytic activity was increased with the yttrium content at first, but then decreased with the further increase of yttrium content. Herein, CuO/CeO2 catalyst doped with 2wt.% of yttrium showed the highest catalytic activity （CO conversion reaches 93.4% at 250 ℃） and thermal stability for WGS reaction. The catalytic activity was correlated with the surface area, the area of peak γ of H2-TPR profile （i.e., the reduction of surface copper oxide （crystalline forms） interacted with surface oxygen vacancies on ceria）, and the area of peak C2 and A1 （Cu^0→←Cu^2＋ in cyclic voltammetry process）, respectively. Besides, Raman spectra provided evidences for a synergistic Cu-Ovacancy interaction, and it was indicated that doping yttrium may facilitate the formation of oxygen vacancies on ceria.
文摘The noble metals (Pt, Pd, Rh) supported on Cu-Ce mixed oxides with γ-Al2O3 washcoat/FeCrAl substrate were investigated as catalytic performance of Three Way Catalysts (TWC) under simulated automotive exhaust feed gas. The structural, morphological features and catalytic activity were observed by X-ray diffractometry (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) and GC-TCD (Varian CP-4900). The catalytic performance of noble metals (Pt, Rh, Pd) supported on Cu-Ce mixed oxides with γ-Al2O3 washcoat/FeCrAl substrate was be compared with noble metals (Pt, Rh, Pd) supported on Ce-Zr mixed oxides with γ-Al2O3 washcoat/FeCrAl substrate and only γ-Al2O3 washcoat/FeCrAl substrate at various stoichiometric ratio of oxygen. The results showed that the addition of Cu-Ce mixed oxides improved CO oxidation reaction at lower temperature during stable lambda of 1, the highest CO conversion of 99% is observed for the noble metals (Pt, Pd, Rh) support on Cu-Ce with γ-Al2O3 washcoat/FeCrAl substrate. The results also showed that, the addition of Cu-Ce mixed oxides promoted released oxygen, thus it improved strongly CO and C3H8 conversion at lean oxygen stoichiometric operation.
基金supported by National Basic Research Program of China(2010CB732300)National Natural Science Foundation of China(21273110,20973091)Natural Science Foundation for the Youth(21203091)
文摘The CuO/CeO2 catalysts were investigated by means of X-ray diffraction （XRD）, laser Raman spectroscopy （LRS）, X-ray photoelectronic spectroscopy （XPS）, temperature-programmed reduction （TPR）, in situ Fourier transform infrared spectroscopy （FTIR） and NO＋CO reaction. The results revealed that the low temperature （〈150℃） catalytic performances were enhanced for CO pretreated samples. During CO pretreatment, the surface Cu＋/Cu0 and oxygen vacancies on ceria surface were present. The low va- lence copper species activated the adsorbed CO and surface oxygen vacancies facilitated the NO dissociation. These effects in turn led to higher activities of CuO/CeO2 for NO reduction. The current study provided helpful understandings of active sites and reaction mechanism in NO＋CO reaction.
基金supported by the National Natural Science Foundation of China (20771061 and 20871071)the 973 Program (2005CB623607)Science and Technology Commission Foundation of Tianjin (08JCYBJC00100 and 09JCYBJC03600)
文摘Nanometer SnO2 particles were synthesized by sol-gel dialytic processes and used as a support to prepare CuO supported catalysts via a deposition-precipitation method. The samples were characterized by means of TG-DTA, XRD, H2-TPR and XPS. The catalytic activity of the CuO/TiO2-SnO2 catalysts was markedly depended on the loading of CuO, and the optimum CuO loading was 8 wt.% （Tloo = 80 ℃）. The CuO/TiO2-SnO2 catalysts exhibited much higher catalytic activity than the CuO/TiO2 and CuO/SnO2 catalysts. H2-TPR result indicated that a large amount of CuO formed the active site for CO oxidation in 8 wt.% CuO/TiO2-SnO2 catalyst.
文摘Three series of CeO2/CuO samples were prepared by impregnation method and characterized by XRD, N2 adsorption-desorption, temperatureprogrammed reduction （TPR）, XPS and TEM techniques. In comparison with the samples prepared with CuO as initial support, the samples with Cu（OH）2 as initial support have higher reducibilities and smaller relative TPR peak areas, and also larger specific surface areas at calcina- tion temperatures of 400 ℃--600 ℃. As a result, Cu（OH）2 is better than CuO as initial support for preferential oxidation of CO in excess H2 （CO-PROX）. The best catalytic performance was achieved on the sample calcined at 600 ℃ and with an atomic ratio of Ce/Cu at 40%. XPS analyses indicate that more interface linkages Ce-O-Cu could be formed when it was calcined at 600 ℃. And the atomic ratio of Ce/Cu at 40% led to a proper reducibility for the sample as illustrated by the TPR measurements.
基金PRIN 2006, "Caratterizzazione spettroscopica e morfologica di Me-POSS eterogeneizzati", MEL Chemicals
文摘CeO2-ZeO2 solid solutions are extensively used as oxygen storage promoters in the current automotive three-way catalysts. High thermal stability of the textural properties is one of the most important requirements for practical application since temperatures up to 1273 K are easily experienced by these materials under real working conditions. In the present paper, we investigated how hydrothermal treatments applied to cakes of doped and undoped ZrO2-rich CeO2-ZrO2 precursors might improve the thermal stability of the final CeO2-ZrO2 solid solution. A rationale was developed that allowed to correlate the morphology of the hydrothermaUy treated cake with the thermal stability at 1273 K of the final product, which did not depend on the composition of the mixed oxides.
基金supported by the National Natural Science Foundation of China(21173153)the National High Technology Research and Development Program of China(863 project)(2013AA065304)
文摘A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic reduction（SCR） performance and SO2-resistant ability of TiO2-SiO2-WO3 were greatly enhanced by the introduction of cerium. The catalyst containing 10% CeO2 showed the highest NO conversion in a wide temperature range and good N2 selectivity with broad operation temperature window at the gas hourly space velocity（GHSV） of 30000 h–1, which was a very promising catalyst for NOx abatement from diesel engine exhaust. The catalysts were characterized by X-ray diffraction（XRD）, scanning electron microscopy with energy dispersive X-ray spectroscopy（SEM-EDS）, N2 adsorption-desorption（BET） and X-ray photoelectron spectroscopy（XPS）. The characterization results showed that the bigger pore radius, higher surface atomic concentration and dispersion of Ce and the abundant adsorbed oxygen on the surface of catalyst contributed to the best NH3-SCR performance of CeO2/TiO2-SiO2-WO3 catalyst containing 10% CeO2.
基金Project supported by State Key Fundamental Research Project(G1999022400)
文摘Nickel catalysts supported on CeO2-ZrO2-CeO2,ZrO2-Al2O3 and Al2O3 were prepared and characterized by means of X-ray diffraction（XRD）,BET areas,H2 temperature-programmed reduction（H2-TPR）,and X-ray photoelectron spectroscopy（XPS）.Through the test of catalytic partial oxidation of methane（CPOM）,Ni/CeO2-ZrO2-Al2O3 displayed the highest activity,which resulted from its largest BET area and best NiO dispersion.Furthermore,Ni/CeO2-ZrO2-Al2O3 maintained a long-time stability in CPOM,which was attributed to its best coking resistance among all the prepared catalysts.
基金Project supported by the Programs Foundation of Ministry of Education of China (20070610026)the National Natural Science Foundation of China (20773090, 20803049)
文摘The catalytic behaviors of Pd （1.4 wt.%） catalysts supported on CeO2-ZrO2 promoted with La2O3 were investigated for methanol decomposition. The measurements of inductively coupled plasma emission spectroscopy （ICP）, N2 adsorption-desorption （BET）, powder X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and oxygen storage capacity （OSC） were used to characterize the properties of catalysts. The catalysts＇ activities were tested in a fixed bed continuous flow reactor operating under atmospheric pressure. The Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 catalyst exhibited the best activity. The reasons for this were twofold： （1） doping of La improved effectively textural properties of CeO2-ZrO2 oxygen storage materials, and （2） Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 possessed super oxygen storage property and reducibility due to the existence of lattice defect oxygen or mobile oxygen, which helped to re-oxidize zerovalent Pd0 to a partly oxidized Pdδ＋. By introducing 5 wt.%La2O3, the specific surface area of the sample increased, but declined if further increasing the content of La2O3 to 10 wt.%.
