The reduction of carbon emissions in the steel industry is a significant challenge,and utilizing CO_(2) from carbon intensive steel industry off-gases for methanol production is a promising strategy for decarbonizatio...The reduction of carbon emissions in the steel industry is a significant challenge,and utilizing CO_(2) from carbon intensive steel industry off-gases for methanol production is a promising strategy for decarbonization.However,steelwork off-gases typically contain various impurities,including H_(2)S,which can deactivate commercial methanol synthesis catalysts,Cu/ZnO/Al_(2)O_(3)(CZA).Reverse water-gas shift(RWGS)reaction is the predominant side reaction in CO_(2) hydrogenation to methanol which can occur at ambient pressure,enabling the decouple of RWGS from methanol production at high pressure.Then,a series of activated CZA catalysts has been in-situ pretreated in 400 ppm H_(2)S/Ar at 250℃and tested for both RWGS reaction at ambient pressure and CO_(2) hydrogenation to methanol at high pressure.An innovative decoupling strategy was employed to isolate the RWGS reaction from the methanol synthesis process,enabling the investigation of the evolution of active site structures and the poisoning mechanism through elemental analysis,X-ray Diffraction,X-ray Photoelectron Spectroscopy,Fourier Transform Infrared Spectroscopy,Temperature Programmed Reduction and CO_(2) Temperature Programmed Desorption.The results indicate that there are different dynamic migration behaviors of ZnO_(x) in the two reaction systems,leading to different poisoning mechanisms.These interesting findings are beneficial to develop sulfur resistant and durable highly efficient catalysts for CO_(2) hydrogenation to methanol,promoting the carbon emission reduction in steel industry.展开更多
Cuprous oxide (Cu 2O) was prepared by reducing Cu 2+ with NaBH 4. 4-chloro-nitrobenzene was used to examined for the photocatalyst in the artificial solar. The results indicate cuprous oxide has high photoactivity and...Cuprous oxide (Cu 2O) was prepared by reducing Cu 2+ with NaBH 4. 4-chloro-nitrobenzene was used to examined for the photocatalyst in the artificial solar. The results indicate cuprous oxide has high photoactivity and the organic degradation was completed. Under the irradiation of visible light, 4-chloro-nitrobenzene solution of 10 mg·1 -1and 40.0 mg·1 -1 decomposed 95% and 84% in 60 minutes, respectively. The degradation is first order reaction.展开更多
以硝酸铜为前驱体,不采用任何模板,通过逐步水热法合成了花状Cu2O/Cu复合纳米材料.用扫描电镜(SEM)、X射线衍射(XRD)和紫外-可见漫反射光谱(DRS)对样品进行表征.结果表明,花状纳米Cu2O/Cu材料是由长为300-500nm,宽为30-70nm的带状花瓣构...以硝酸铜为前驱体,不采用任何模板,通过逐步水热法合成了花状Cu2O/Cu复合纳米材料.用扫描电镜(SEM)、X射线衍射(XRD)和紫外-可见漫反射光谱(DRS)对样品进行表征.结果表明,花状纳米Cu2O/Cu材料是由长为300-500nm,宽为30-70nm的带状花瓣构成,在可见光区域有很强的吸收.复合材料中Cu的含量可以通过反应时间进行调控.对染料Procion Red MX-5B(PR)的可见光催化降解,Cu能明显提高Cu2O的光催化性能.当Cu质量分数为27%-71%时,复合材料Cu2O/Cu的催化活性明显高于单相Cu2O.与立方体形貌的Cu2O/Cu复合材料相比,花状纳米Cu2O/Cu复合材料对染料PR有更高的催化降解性能.且该复合材料有较高的循环回收利用率.展开更多
A novel coprecipitation-reduction process has been proposed for preparing highly selective Cu/ZnO/Al 2O 3 catalysts for methanol synthesis from CO 2 hydrogenation. Compared to the catalysts prepared by the conventiona...A novel coprecipitation-reduction process has been proposed for preparing highly selective Cu/ZnO/Al 2O 3 catalysts for methanol synthesis from CO 2 hydrogenation. Compared to the catalysts prepared by the conventional method, the new catalysts prepared via the new method exhibit much higher BET surface area and pore size, much smaller crystallite size and higher catalytic activity and selectivity in CO 2 hydrogenation to methanol. It is also found that the molar ratio of Cu + to Cu 0 on the surface of the catalyst obtained by coprecipitation-reduction is much higher than that on the reduced catalyst obtained by the conventional method, which could be crucial for its high activity and selectivity for catalytic hydrogenation of CO 2 to methanol.展开更多
基金supported by the National Natural Science Foundation of China(Nos.22276060 and 21976059)Guangdong Basic and Applied Basic Research Foundation(No.2024A1515012636)China Scholarship Council Scholarship(No.201906155006)。
文摘The reduction of carbon emissions in the steel industry is a significant challenge,and utilizing CO_(2) from carbon intensive steel industry off-gases for methanol production is a promising strategy for decarbonization.However,steelwork off-gases typically contain various impurities,including H_(2)S,which can deactivate commercial methanol synthesis catalysts,Cu/ZnO/Al_(2)O_(3)(CZA).Reverse water-gas shift(RWGS)reaction is the predominant side reaction in CO_(2) hydrogenation to methanol which can occur at ambient pressure,enabling the decouple of RWGS from methanol production at high pressure.Then,a series of activated CZA catalysts has been in-situ pretreated in 400 ppm H_(2)S/Ar at 250℃and tested for both RWGS reaction at ambient pressure and CO_(2) hydrogenation to methanol at high pressure.An innovative decoupling strategy was employed to isolate the RWGS reaction from the methanol synthesis process,enabling the investigation of the evolution of active site structures and the poisoning mechanism through elemental analysis,X-ray Diffraction,X-ray Photoelectron Spectroscopy,Fourier Transform Infrared Spectroscopy,Temperature Programmed Reduction and CO_(2) Temperature Programmed Desorption.The results indicate that there are different dynamic migration behaviors of ZnO_(x) in the two reaction systems,leading to different poisoning mechanisms.These interesting findings are beneficial to develop sulfur resistant and durable highly efficient catalysts for CO_(2) hydrogenation to methanol,promoting the carbon emission reduction in steel industry.
文摘Cuprous oxide (Cu 2O) was prepared by reducing Cu 2+ with NaBH 4. 4-chloro-nitrobenzene was used to examined for the photocatalyst in the artificial solar. The results indicate cuprous oxide has high photoactivity and the organic degradation was completed. Under the irradiation of visible light, 4-chloro-nitrobenzene solution of 10 mg·1 -1and 40.0 mg·1 -1 decomposed 95% and 84% in 60 minutes, respectively. The degradation is first order reaction.
文摘以硝酸铜为前驱体,不采用任何模板,通过逐步水热法合成了花状Cu2O/Cu复合纳米材料.用扫描电镜(SEM)、X射线衍射(XRD)和紫外-可见漫反射光谱(DRS)对样品进行表征.结果表明,花状纳米Cu2O/Cu材料是由长为300-500nm,宽为30-70nm的带状花瓣构成,在可见光区域有很强的吸收.复合材料中Cu的含量可以通过反应时间进行调控.对染料Procion Red MX-5B(PR)的可见光催化降解,Cu能明显提高Cu2O的光催化性能.当Cu质量分数为27%-71%时,复合材料Cu2O/Cu的催化活性明显高于单相Cu2O.与立方体形貌的Cu2O/Cu复合材料相比,花状纳米Cu2O/Cu复合材料对染料PR有更高的催化降解性能.且该复合材料有较高的循环回收利用率.
文摘A novel coprecipitation-reduction process has been proposed for preparing highly selective Cu/ZnO/Al 2O 3 catalysts for methanol synthesis from CO 2 hydrogenation. Compared to the catalysts prepared by the conventional method, the new catalysts prepared via the new method exhibit much higher BET surface area and pore size, much smaller crystallite size and higher catalytic activity and selectivity in CO 2 hydrogenation to methanol. It is also found that the molar ratio of Cu + to Cu 0 on the surface of the catalyst obtained by coprecipitation-reduction is much higher than that on the reduced catalyst obtained by the conventional method, which could be crucial for its high activity and selectivity for catalytic hydrogenation of CO 2 to methanol.
