期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
PFI引入PEDOT:PSS空穴注入层提升Cu-In-Zn-S基量子点发光二极管性能
1
作者 刘柄含 赵金星 +6 位作者 刘子奕 解修林 郑龙雪 吴静可 蔡炆澈 李旭 唐爱伟 《液晶与显示》 北大核心 2026年第1期142-149,共8页
多元铜基硫族量子点发光二极管(QLEDs)中空穴注入过慢造成的电子-空穴注入不平衡是限制器件性能提升的主要原因之一。本研究设计了一种全氟化树脂(PFI)改性聚(3,4-乙烯二氧噻吩)-聚(苯乙烯磺酸盐)(PEDOT:PSS)的策略,借助PFI的自组装特... 多元铜基硫族量子点发光二极管(QLEDs)中空穴注入过慢造成的电子-空穴注入不平衡是限制器件性能提升的主要原因之一。本研究设计了一种全氟化树脂(PFI)改性聚(3,4-乙烯二氧噻吩)-聚(苯乙烯磺酸盐)(PEDOT:PSS)的策略,借助PFI的自组装特性构建出具有梯度能级的空穴注入层PFI-PEDOT:PSS。单空穴传输器件进一步证明,PFIPEDOT:PSS空穴注入层可有效降低器件空穴注入势垒并提高空穴注入效率,从而使器件性能得到提升。最终采用PFI-PEDOT:PSS作为空穴注入层、Cu-In-Zn-S量子点作为发光层制备的电致发光器件的峰值外量子效率达到4.7%,是PEDOT:PSS基器件的2.2倍。结果表明,这种将PFI引入PEDOT:PSS空穴注入层的修饰策略可以有效提升CuIn-Zn-S基QLEDs器件性能,也为后续环境友好型QLEDs产业化应用奠定了重要研究基础。 展开更多
关键词 cu-in-zn-s量子点 发光二极管 PEDOT∶PSS 全氟化树脂
在线阅读 下载PDF
Investigation of post-thermal annealing on material properties of Cu-In-Zn-Se thin films
2
作者 H.H.Güllü M.Parlak 《Journal of Semiconductors》 EI CAS CSCD 2017年第12期26-31,共6页
The Cu-In-Zn-Se thin film was synthesized by changing the contribution of In in chalcopyrite CulnSe2 with Zn. The XRD spectra of the films showed the characteristic diffraction peaks in a good agreement with the quate... The Cu-In-Zn-Se thin film was synthesized by changing the contribution of In in chalcopyrite CulnSe2 with Zn. The XRD spectra of the films showed the characteristic diffraction peaks in a good agreement with the quaternary Cu-In-Zn-Se compound. They were in the polycrystalline nature without any post-thermal process, and the main orientation was found to be in the (112) direction with tetragonal crystalline structure. With increasing annealing temperature, the peak intensities in preferred orientation became more pronounced and grain sizes were in increasing behavior from 6.0 to 25.0 nm. The samples had almost the same atomic composition of Cu0.sIn0.sZnSe2. However, EDS results of the deposited films indicated that there was Se re-evaporation and/or segregation with the annealing in the structure of the film. According to the optical analysis, the transmittance values of the films increased with the annealing temperature. The absorption coefficient of the films was calculated as around 105 cm-1 in the visible region. Moreover, optical band gap values were found to be changing in between 2.12 and 2.28 eV depending on annealing temperature. The temperature-dependent dark- and photo-conductivity measurements were carried out to investigate the electrical characteristics of the films. 展开更多
关键词 ANNEALING cu-in-zn-se thin film
原文传递
离子液体辅助微波法水相合成Cu-In-Zn-S/ZnS量子点及其在白光LED中的应用 被引量:1
3
作者 陈婷 徐彦乔 +3 位作者 江伟辉 谢志翔 王连军 江莞 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2020年第4期439-446,共8页
Cu-In-Zn-S(CIZS)量子点具有毒性低、发射谱覆盖范围广、Stokes位移大等特点,在照明领域具有广阔的应用前景。通过离子液体辅助微波法水相合成CIZS量子点,系统研究了反应时间、配体添加量和前驱体溶液pH对样品的物相组成、显微形貌以及... Cu-In-Zn-S(CIZS)量子点具有毒性低、发射谱覆盖范围广、Stokes位移大等特点,在照明领域具有广阔的应用前景。通过离子液体辅助微波法水相合成CIZS量子点,系统研究了反应时间、配体添加量和前驱体溶液pH对样品的物相组成、显微形貌以及荧光性能的影响。结果表明,与未添加离子液体制备的样品相比,离子液体的引入提高了反应速率,可有效地将反应时间由180min缩短至30min;随着反应时间的延长,量子点的粒径增大,其发射峰位由609.2nm红移至634.6nm。随着nGSH(谷胱甘肽)/n(CuInZn)的增大,量子点的粒径逐渐增大,导致其发射峰位由622.6 nm红移至631.6 nm,同时量子点的发光强度逐渐增强;当该比值为15时,量子点的荧光强度最高。此外,随着pH的增大,去质子化的–SH和–NH2与量子点的作用逐渐增强,有效地钝化了量子点的表面态,使其荧光强度逐渐上升,当pH为8.5时,样品的荧光性能最佳,同时量子点的平均水合粒径由99nm增大至241nm;量子点溶液的Zeta电位为–27.7~–41.1mV,说明量子点溶液具有优异的稳定性。通过ZnS表面修饰可有效提高量子点的荧光强度。将CIZS/ZnS量子点与蓝光芯片结合,获得了显色指数为85.6、发光效率为34.8 lm/W的白光LED器件,为水相制备的多元量子点在白光LED中的应用提供了参考。 展开更多
关键词 离子液体 微波 水相合成 cu-in-zn-s 量子点
在线阅读 下载PDF
Facile synthesis of Cu-In-Zn-S alloy nanospheres for fast photoelectric detection across the visible spectrum
4
作者 Yang Sheng Jie Yang +3 位作者 Qiliang Zhu Yixin Sun Rong Zhang Xiaosheng Tang 《Frontiers of Materials Science》 SCIE CSCD 2020年第3期323-331,共9页
Fast and broadband photoelectric detection is a key process to many photoelectronic applications,during which the semiconductor light absorber plays a critical role.In this report,we prepared Cu-In-Zn-S(CIZS)nanospher... Fast and broadband photoelectric detection is a key process to many photoelectronic applications,during which the semiconductor light absorber plays a critical role.In this report,we prepared Cu-In-Zn-S(CIZS)nanospheres with different compositions via a facile hydrothermal method.These nanospheres were^200 nm in size and comprised of many small nanocrystals.A photodetector responded to the visible spectrum was demonstrated by spraying the solution processed nanospheres onto gold interdigital electrodes.The photoelectric characterization of these devices revealed that CIZS nanospheres with low molar ratio of n(Cu)/n(In)exhibited improved photoelectric response compared to those with high n(Cu)/n(In),which was attributed to the reduced defects.The relatively large switching ratio(Ion/Ioff),fast response and wide spectral coverage of the CIZS-based photodetector render it a promising potential candidate for photoelectronic applications. 展开更多
关键词 CHALCOGENIDES cu-in-zn-s nanospheres SOLVOTHERMAL photoelectric detection
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部