The inherent brittle behavior and ductile-to-brittle transition(DBT)mechanism of Sn−3.0Ag−0.5Cu(SAC305)solder alloy at the liquid nitrogen temperature(LNT,77 K)were investigated through uniaxial tensile experiments co...The inherent brittle behavior and ductile-to-brittle transition(DBT)mechanism of Sn−3.0Ag−0.5Cu(SAC305)solder alloy at the liquid nitrogen temperature(LNT,77 K)were investigated through uniaxial tensile experiments conducted at different temperatures.Dynamic recovery and recrystallization of SAC305 solder alloy at room temperature(RT,293 K)activate a softening process.Conversely,intersecting and none-intersecting deformation twins,embedded in body-centered tetragonal Sn,enhance tensile strength and stabilize strain hardening rate,while suppressing the elongation of the alloy at LNT.The irreconcilable velocity difference between twin thickening(~8μm/s)and dislocation slip(4μm/s)results in premature brittle fracture,during the linear hardening and DBT.Moreover,the secondary phases degrade the mechanical property of SAC305 solder alloy,and micro-cracks appear between Cu_(6)Sn_(5)and Ag_(3)Sn in the eutectic matrix.展开更多
Liquefied natural gas storage and transportation as well as space propulsion systems have sparked inter-est in the martensitic transformation and behaviours of 316 L stainless steels(SS)under ultra-cryogenic deformati...Liquefied natural gas storage and transportation as well as space propulsion systems have sparked inter-est in the martensitic transformation and behaviours of 316 L stainless steels(SS)under ultra-cryogenic deformation.In this study,high-resolution transmission electron microscopy(HRTEM)and molecular dy-namics(MD)simulations were used to investigate the atomic arrangements and crystalline defects of deformation-induced γ-austenite→ε-martensite→α'-martensite and γ→α'martensitic transforma-tions in 316 L SS at 15 and 173 K.Theγ→εtransformation involves the glide of Shockley partial dislocations on(111)γplanes without a change in atomic spacing.The formation of anα'inclusion in a singleε-band is achieved by a continuous lattice distortion,accompanied by the formation of a tran-sition zone ofα'and the expansion of the average atomic spacings due to dislocation shuffling.Asα'grows further intoγ,the orientation relationship(OR)of theα'changes by lattice bending.This pro-cess follows the Bogers-Burgers-Olson-Cohen model despite it not occurring on intersecting shear bands.Stacking faults and twins can also serve as nucleation sites forα'at 173 K.We also found that direct transformation of γ→α'occurs by the glide of √6aγ[11(2)]/12 dislocations on every(111)γplane with misfit dislocations.Overall,this study provides,for the first time,insights into the atomic-scale mech-anisms of various two-step and one-step martensitic transformations induced by cryogenic deformation and corresponding local strain,enhancing our understanding of the role of martensitic transformation under ultra-cryogenic-temperature deformation in controlling the properties.展开更多
The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HE...The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HEA),which is mediated by nano-twinning and phase transformation at cryogenic temperatures.During uniaxial tensile deformation at 77 K,the alloy exhibited the formation of high-density deformation nano-twinning,cross-twinning,stacking faults(SFs)and Lomer-Cottrell locks(L-C locks).Additionally,the lower stacking fault energy(SFE)at low temperatures promotes the formation of the 9R phase.The high-density twin boundaries effectively hinder dislocation movement,leading to the instability of plastic deformation and promoting the serrated flow behavior.Furthermore,the rapid and unstable transformation of the 9R phase contributes to the pronounced serrated flow behavior.Nano-twinning,SFs,cross-twinning,L-C locks and 9R phase collectively induce a dynamic Hall-Petch effect,enhancing the strength-ductility synergy and strain-hardening ability of deformed alloy at 77 K.Our work provides valuable insights into the mechanism of tensile deformation at cryogenic temperatures in single-phase FCC HEA.展开更多
Magnesium(Mg)alloys typically suffer from cold brittleness at cryogenic temperatures(CT),where strength significantly increases and ductility decreases with decreasing temperature.This study investigates the improveme...Magnesium(Mg)alloys typically suffer from cold brittleness at cryogenic temperatures(CT),where strength significantly increases and ductility decreases with decreasing temperature.This study investigates the improvement of the strength-ductility balance at CT in Mg-3.6Y(wt.%)alloys with a bimodal grain structure,consisting of fine dynamically recrystallized(DRXed)grains and elongated unDRXed grains.The results demonstrate that the sample with∼50%DRXed region fraction achieves a remarkable strength-ductility synergy at CT.Dislocation strengthening in the unDRXed regions and grain boundary strengthening in the DRXed regions increase the tensile yield strength(TYS)by 1.6 times at CT compared to room temperature(RT).Concurrently,activation of{10¯12}tensile twinning and non-basal slip systems in DRXed regions,including prismatic a and pyramidal I c+a slips,along with abnormal pyramidal slip within unDRXed grains,reduces fracture elongation by only 1%relative to RT.Furthermore,the bimodal grain structure effectively alleviates strain localization through strain partitioning between DRXed and unDRXed grains,leading to the formation of interface-affected zones(IAZs)that promote the accumulation of geometrically necessary dislocations(GNDs)and enhance hetero-deformation-induced(HDI)hardening.At CT,the IAZs become wider and more pronounced,indicating enhanced GND accumulation that promotes stronger strain partitioning and more effective HDI strengthening.This work demonstrates that the bimodal grain structure is an effective approach to overcoming the low-temperature brittleness of Mg alloys,providing valuable insights for the design of high-performance materials for cryogenic applications.展开更多
In this study,Mg-Gd-Y-(Sm)-Zr(GW-(Sm))alloys were subjected to compression tests at both 293 and 77 K.The effect of Sm addition on the plastic deformation mechanism of Mg-Gd-Y-Zr(GW)alloy was investigated,and a detail...In this study,Mg-Gd-Y-(Sm)-Zr(GW-(Sm))alloys were subjected to compression tests at both 293 and 77 K.The effect of Sm addition on the plastic deformation mechanism of Mg-Gd-Y-Zr(GW)alloy was investigated,and a detailed analysis was conducted on the relationships between mechanical responses and the microstructure of the alloys.The findings suggest that dislocation slip plays a predominant role in the plastic deformation of GW-(Sm)alloys.The addition of Sm reduces the stacking fault energy(SFE)of the alloy,which promotes<c+a>slip and inhibits twinning.Meanwhile,Sm plays a role in solution strengthening,causing an elevation in the flow stress of the alloy.At cryogenic temperature(CT),the critical resolved shear stress(CRSS)of dislocation slip is increased,so the dislocation motion requires greater external force.In addition,the extensive crossed twins exhibited in the microstructure,which shorten the dislocation slip path and enhance the grain boundary strengthening.This research contributes to the advancement of plastic deformation theories for magnesium-rare earth(Mg-RE)alloys.展开更多
The tensile behavior of(Fe_(50)Mn_(30)Co_(10)Cr_(10))_(100-x)Si_(x)(x=0(Si0),2(Si2))metastable HEAs prepared by selective laser melting was studied at cryogenic temperatures.The results demonstrate that the addition o...The tensile behavior of(Fe_(50)Mn_(30)Co_(10)Cr_(10))_(100-x)Si_(x)(x=0(Si0),2(Si2))metastable HEAs prepared by selective laser melting was studied at cryogenic temperatures.The results demonstrate that the addition of Si leads to lattice distortion and a decrease in stacking fault energy,especially at 77 K,which significantly promotes transformation-induced plasticity(TRIP)in Si2 HEAs.The yield strength,tensile strength,and ductility of Si2 HEAs are 505.2 MPa,1364.1 MPa,and 19%,which are 43%,53% and 58% higher than those of Si0 alloy,respectively.TRIP is the main deformation mode,in addition to dislocation slip,and plays a key role in strengthening.The reinforced and continuously sustained TRIP maintains a dynamic strain distribution during deformation.Ultrahigh strain hardening greatly enhances the strength and ductility.展开更多
In the present study,a face-centered cubic non-equiatomic Cr_(26)Mn_(20)Fe_(20)Co20Ni_(14) high-entropy alloy(HEA)with a low stacking fault energy of 17.6 mJ m^(−2) was prepared by vacuum induction melting,forging and...In the present study,a face-centered cubic non-equiatomic Cr_(26)Mn_(20)Fe_(20)Co20Ni_(14) high-entropy alloy(HEA)with a low stacking fault energy of 17.6 mJ m^(−2) was prepared by vacuum induction melting,forging and annealing processes.The recrystallized sample is revealed to exhibit an excellent combination of strength and ductility over a wide temperature range of 4.2–293 K.With decreasing temperature from 293 to 77 K,the ductility and ultimate tensile strength(UTS)gradually increase by 30% to 95% and 137% to 1020 MPa,respectively.At the lowest temperature of 4.2 K,the ductility keeps 65% and the UTS increases by 200% to 1300 MPa,which exceed those published in the literature,including conventional 300 series stainless steels.Detailed microstructural analyses of this alloy reveal a change of deformation mechanisms from dislocation slip and nano-twinning at 293 K to nano-phase transformation at 4.2 K.The cooperation and competition of multiple nano-twinning and nano-phase transformation are responsible for the superior tensile properties at cryogenic temperatures.Our study provides experimental evidence for potential cryogenic applications of HEAs.展开更多
Recently,high-and medium-entropy alloys(HEAs and MEAs) have been found to exhibit excellent cryogenic mechanical properties,but most of them contain high-priced Co element.Therefore,developing HEAs or MEAs with high s...Recently,high-and medium-entropy alloys(HEAs and MEAs) have been found to exhibit excellent cryogenic mechanical properties,but most of them contain high-priced Co element.Therefore,developing HEAs or MEAs with high strength and ductility and relatively low cost is urgent.In this work,novel Cofree Fex Mn(75-x) Ni(10)Cr(15)(x=50 and 55 at.%) MEAs were developed,which exhibit a good combination of low cost,high strength and ductility at cryogenic temperature.It was found that the Fe(50)Mn(25)Ni(10)Cr(15)MEA exhibits a combination of cryogenic tensile strength of^0.98 GPa and ductility of^83 %.The excellent cryogenic mechanical properties were attributed to joint of twinning-induced plasticity(TWIP) and transformation-induced plasticity(TRIP) effects.The present study sheds light on developing low cost MEAs with high perfo rmance for cryogenic-tempe rature applications.展开更多
This study investigates the microstructural characteristics of AZ31 Mg alloys rolled at room temperature(RT)and cryogenic temperature(CT)and the variation in their microstructure and hardness during subsequent anneali...This study investigates the microstructural characteristics of AZ31 Mg alloys rolled at room temperature(RT)and cryogenic temperature(CT)and the variation in their microstructure and hardness during subsequent annealing.Cryorolling induces the formation of more side cracks than does RT rolling,because of the reduction in the ability of the material to accommodate deformation at CT.Numerous{10-11}contraction and{10-11}-{10-12}double twins are formed in both the material rolled at RT and that rolled at CT,because the grains of the initial material are favorably oriented for{10-11}twinning under rolling.The RT-rolled material has a higher dislocation density than the cryorolled material,and more twins are uniformly distributed throughout the former material.As a result,static recrystallization during subsequent annealing is more pronounced in the RT-rolled material,which results in the formation of a highly recrystallized homogeneous microstructure after annealing.In contrast,the formed twins are predominantly present along the shear bands in the cryorolled material,as a result of which this material has an inhomogeneous bi modal structure containing a large amount of coarse unrecrystallized grains after annealing.The hardness of the annealed RT-rolled material is higher than that of the annealed cryorolled material owing to the finer grain structure of the former.展开更多
To study the bonding properties between steel strand and concrete at room and cryogenic temperatures, a series of center pullout experiments were conducted on 96 bonding anchorage specimens at the lowest temperature o...To study the bonding properties between steel strand and concrete at room and cryogenic temperatures, a series of center pullout experiments were conducted on 96 bonding anchorage specimens at the lowest temperature of-165 ℃. The impacts on the bonding property of such parameters as the temperature, concrete strength, the relative concrete cover thickness, and the relative anchorage length were analyzed. The test results indicate that the changes in temperature have a clear effect on the bonding property between steel strand and concrete. As the temperature decreases, the bond stress, which corresponds to a 1 mm slip of steel strand in relation to concrete, and the ultimate bond strength initially increase and subsequently decrease at the inflection point of-80 ℃. The impact of the concrete strength on the bonding property, as shown by the tensile strength and the moisture content interaction, indicates that the bond stress vs concrete strength curve initially increases and later decreases with a decrease in temperature; the bond stress vs concrete cover thickness curve linearly increases, but the bond stress vs anchorage length curve linearly decreases at first and finally levels off.展开更多
The effect of cryogenic temperatures on the mechanical properties and fracture mechanism of SnAgCu−SnPb mixed solder joints was investigated.The results showed that the tensile strength of mixed solder joints first in...The effect of cryogenic temperatures on the mechanical properties and fracture mechanism of SnAgCu−SnPb mixed solder joints was investigated.The results showed that the tensile strength of mixed solder joints first increased with the increase of Pb content and reached its maximum at 22.46 wt.%Pb;subsequently,it decreased as Pb content increased.However,cryogenic temperatures improved the tensile strength of the solder joints.Both Pb content and cryogenic temperature caused the fracture mode of the mixed solder joints to change;however,temperature remained the main influencing factor.As the temperature fell from 298 to 123 K,the failure pattern in the solder joints transformed from ductile fracture to quasi-ductile fracture to quasi-brittle fracture and finally,to brittle fracture.展开更多
The tensile and fracture behaviors of AA6061 alloy were investigated in order to provide quantitative data about this alloy at cryogenic temperatures.Specimens of AA6061 alloy were solution heat treated before tensile...The tensile and fracture behaviors of AA6061 alloy were investigated in order to provide quantitative data about this alloy at cryogenic temperatures.Specimens of AA6061 alloy were solution heat treated before tensile tests at 298,173 and 77 K and tested at strain rates in the range from 0.1 to 0.0001 s^(−1).The results indicate the suppression of the Portevin−Le Chatelier(PLC)effect and dynamic strain aging(DSA)at 77 K.In contrast,at 298 K,a remarkable serrated flow,characteristic of the PLC effect,is observed.Furthermore,the tensile behavior at 77 K,compared with that observed at 173 and 298 K,shows a simultaneous increase in strength,uniform elongation,modulus of toughness,strain-hardening exponent and strain rate sensitivity,which is related to a decrease in the dynamic recovery rate at low temperature.These responses are reflected on the fracture morphology,since the dimple size decreases at 77 K,while the area covered by dimples increases.Comparisons of the Johnson−Cook model show that a good agreement can be obtained for tests at 173 and 77 K,in which DSA is suppressed.展开更多
Multi-principal element alloys usually exhibit outstanding strength and toughness at cryogenic temperatures,especially in CrMnFeCoNi and CrCoNi alloys.These remarkable cryogenic properties are attributed to the occurr...Multi-principal element alloys usually exhibit outstanding strength and toughness at cryogenic temperatures,especially in CrMnFeCoNi and CrCoNi alloys.These remarkable cryogenic properties are attributed to the occurrence of deformation twins,and it is envisaged that a reduced stacking fault energy(SFE)transforms the deformation mechanisms into advantageous properties at cryogenic temperatures.A recently reported high-strength VCoNi alloy is expected to exhibit further notable cryogenic properties.However,no attempt has been made to investigate the cryogenic properties in detail as well as the underlying deformation mechanisms.Here,the effects of cryogenic temperature on the tensile and impact properties are investigated,and the underlying mechanisms determining those properties are revealed in terms of the temperature dependence of the yield strength and deformation mechanism.Both the strength and ductility were enhanced at 77 K compared to 298 K,while the Charpy impact toughness gradually decreased with temperature.The planar dislocation glides remained unchanged at 77 K in contrast to the CrMnFeCoNi and CrCoNi alloys resulting in a relatively constant and slightly increasing SFE as the temperature decreased,which is confirmed via ab initio simulations.However,the deformation localization near the grain boundaries at 298 K changed into a homogeneous distribution throughout the whole grains at 77 K,leading to a highly sustained strain hardening rate.The reduced impact toughness is directly related to the decreased plastic zone size,which is due to the reduced dislocation width and significant temperature dependence of the yield strength.展开更多
The mechanical behavior of VCoNi medium-entropy alloys with five different grain sizes at three different temperatures was investigated.The VCoNi alloys with different grain sizes exhibit a traditional strength–ducti...The mechanical behavior of VCoNi medium-entropy alloys with five different grain sizes at three different temperatures was investigated.The VCoNi alloys with different grain sizes exhibit a traditional strength–ductility trade-off at 77 K,194 K and 293 K.Both the yield strength and the uniform elongation of the VCoNi alloys with similar grain size increase with decreasing the deformation temperature from 293 to 77 K.Obvious strain hardening rate recovery characterized by an evident up-turn behavior at stage II is observed in VCoNi alloys with the grain size above 11.1μm.It is found that the extent of the strain hardening rate recovery increases with increasing grain size or decreasing deformation temperature.This may mainly result from the faster increase in the dislocation multiplication rate caused by the decrease in the dislocation mean free path,the decrease in the absorption of dislocations by grain boundaries and the dynamic recovery from the cross-slip with increasing grain size,as well as the suppressed dynamic recovery at cryogenic temperatures.The critical grain sizes for the occurrence of the recovery of strain hardening rate are determined to be around 9.5μm,8.3μm and 3μm for alloys deformed at 293 K,194 K and 77 K,respectively.The basic mechanism for the strain hardening behavior of the VCoNi alloys associated with grain size and deformation temperature is analyzed.展开更多
The mechanical properties and microstructural evolution of zircaloy-4 subjected to cumulative strains of 1.48,2.96,4.44 and 5.91 through multiaxial forging（MAF） at cryogenic temperature（77 K） were investigated.The...The mechanical properties and microstructural evolution of zircaloy-4 subjected to cumulative strains of 1.48,2.96,4.44 and 5.91 through multiaxial forging（MAF） at cryogenic temperature（77 K） were investigated.The mechanical properties of the MAF treated alloy were measured through universal tensile testing and Vickers hardness testing equipment.The zircaloy-4 deformed up to a cumulative strain of 5.91 showed improvement in both ultimate tensile strength and hardness from 474 MPa to 717 MPa and from HV 190 to HV 238,respectively,as compared with the as-received alloy.However,there was a noticeable decrement in ductility（from 18%to 3.5%） due to the low strain hardening ability of deformed zircaloy-4.The improvement in strength and hardness of the deformed alloy is attributed to the grain size effect and higher dislocation density generated during multiaxial forging.The microstructural evolutions of deformed samples were characterized by optical microscopy and transmission electron microscopy（TEM）.The evolved microstructure at a cumulative strain of 5.91 obtained after MAF up to 12 cycles depicted the formation of ultrafine grains with an average size of 150-250 nm.展开更多
Twinning greatly affects the microstructure and mechanical performance of titanium alloys.The twinning behavior of a basal textured commercially pure titanium TA2 plates rolled to 4% reduction at the ambient and cryog...Twinning greatly affects the microstructure and mechanical performance of titanium alloys.The twinning behavior of a basal textured commercially pure titanium TA2 plates rolled to 4% reduction at the ambient and cryogenic temperatures has been investigated.Microstructures of the rolled samples were investigated by optical microscope（OM）and the twinning analysis was carried out based on orientation data collected by electron back-scatter diffraction（EBSD）.{1122}contraction twins,{1124}contraction twins and {1012}extension twins have been observed.Twinning mode activity varied with rolling temperature.Twinning is considered as the dominant deformation mechanism during rolling at both temperatures for the strain condition.Larger proportion of grains activates twinning during cryorolling,and greater number and more diverse types of twins are observed;manifestly related to the suppression of dislocation slips at the cryogenic temperature.{1122}contraction twins are the dominate twin type within samples rolled at both temperatures.Several{1124}contraction twins are observed in the cryorolled sample while there are only a few in the sample rolled at room temperature.A few tiny{1012}twins have been identified in both samples.{1124}contraction twins are preferentially activated at cryogenic deformation temperature and the{1012}extension twins may result in local strain accommodation.展开更多
Microindentation creep tests on an electrodeposited extremely fine(4.9 nm) nanograined(ng) Ni-14.2 at.% Mo(Ni-14.2 Mo) at both room temperature(RT) and liquid nitrogen temperature(LNT) demonstrated that lowering tempe...Microindentation creep tests on an electrodeposited extremely fine(4.9 nm) nanograined(ng) Ni-14.2 at.% Mo(Ni-14.2 Mo) at both room temperature(RT) and liquid nitrogen temperature(LNT) demonstrated that lowering temperature retarded softening in the ng Ni-Mo alloy. The obtained strain rate sensitivity at LNT was one order of magnitude lower than that at RT. Microstructural characterization revealed that mechanically-driven grain boundary(GB) migration was greatly suppressed by lowering temperature,which might be ascribed to the presence of solute Mo atoms that significantly retarded coupled GB motion at LNT. Deformation was instead carried by shear bands.展开更多
It is widely acknowledged that the performance of a piezoelectric stack would decline with the temperature decreasing,which will exert negative influence on its application in low-temperature environment.Therefore,a c...It is widely acknowledged that the performance of a piezoelectric stack would decline with the temperature decreasing,which will exert negative influence on its application in low-temperature environment.Therefore,a convenient and efficient warming structure for the piezoelectric stack is proposed in this paper to solve this problem.Based on the theoretical analysis of heat transfer,two heating modes,namely,overall heating and local heating are analyzed and compared.Moreover,experimental tests are conducted to evaluate the effectiveness of the structure.Based on the results,it can be concluded that the theoretical results are confirmed with experimental results.Besides,the temperature and performance of the piezoelectric stack are kept stable as temperature varies from 10℃to-70℃,which manifests the feasibility of the structure.Therefore,this paper could be an available reference for those engaged in cryogenic investigation of smart materials and structures.展开更多
In this work,we investigated the mechanical properties and corresponding deformation mechanisms of an Al1Mg0.4Si alloy,which exhibited significantly higher strength and outstanding strain hardening capacity at 77 K co...In this work,we investigated the mechanical properties and corresponding deformation mechanisms of an Al1Mg0.4Si alloy,which exhibited significantly higher strength and outstanding strain hardening capacity at 77 K compared to its counterparts at 298 K.The deformation mechanisms responsible for the excellent strength-ductility synergy and extraordinary strain hardening capacity at cryogenic temperature were elucidated through a combined experimental and simulation study.The results reveal the presence of numerous slip traces and microbands throughout grain surfaces during deformation at 298 K,whereas at 77 K,vague grain surfaces dominate,indicating the simultaneous operation of multiple slip systems.Transmission electron microscopy(TEM)analysis using the two-beam diffraction technique demonstrates the presence of dislocations with several different Burgers vectors inside a grain at cryogenic temperature,confirming the activation of multiple slip systems.The accumulation of dislocations facilitated by these multiple slip systems,combined with the high dislocation density,contributes to strain hardening and remarkable uniform elongation at 77 K.A modified dislocation density-based crystal plasticity model,incorporating the effect of grain boundary hardening(GBH)and temperature,was developed to gain a better understanding of the underlying mechanisms governing alloy’s strength and plasticity.The GBH effect significantly enhances statistically stored dislocation(SSD)density and screw dislocation proportion,which promote homogeneous deformation and enhance strain hardening capacity at cryogenic temperature.These findings deepen the understanding of plastic deformation at cryogenic temperatures and pave the way for the development of ultrahigh-performance metallic materials for cryogenic applications.展开更多
The experimental results of the cryogenic temperature characteristics on 0.18-μm silicon-on-insulator（SOI） metaloxide-silicon（MOS） field-effect-transistors（FETs） were presented in detail. The current and capaci...The experimental results of the cryogenic temperature characteristics on 0.18-μm silicon-on-insulator（SOI） metaloxide-silicon（MOS） field-effect-transistors（FETs） were presented in detail. The current and capacitance characteristics for different operating conditions ranging from 300 K to 10 K were discussed. SOI MOSFETs at cryogenic temperature exhibit improved performance, as expected. Nevertheless, operation at cryogenic temperature also demonstrates abnormal behaviors, such as the impurity freeze-out and series resistance effects. In this paper, the critical parameters of the devices were extracted with a specific method from 300 K to 10 K. Accordingly, some temperature-dependent-parameter models were created to improve fitting precision at cryogenic temperature.展开更多
基金supported by the National Natural Science Foundation of China(No.51775141)。
文摘The inherent brittle behavior and ductile-to-brittle transition(DBT)mechanism of Sn−3.0Ag−0.5Cu(SAC305)solder alloy at the liquid nitrogen temperature(LNT,77 K)were investigated through uniaxial tensile experiments conducted at different temperatures.Dynamic recovery and recrystallization of SAC305 solder alloy at room temperature(RT,293 K)activate a softening process.Conversely,intersecting and none-intersecting deformation twins,embedded in body-centered tetragonal Sn,enhance tensile strength and stabilize strain hardening rate,while suppressing the elongation of the alloy at LNT.The irreconcilable velocity difference between twin thickening(~8μm/s)and dislocation slip(4μm/s)results in premature brittle fracture,during the linear hardening and DBT.Moreover,the secondary phases degrade the mechanical property of SAC305 solder alloy,and micro-cracks appear between Cu_(6)Sn_(5)and Ag_(3)Sn in the eutectic matrix.
基金supported by the Henry Royce Institute for Advanced Materials,funded through Engineering and Physical Sciences Research Council(EPSRC)grants EP/R00661X/1,EP/S019367/1,EP/P025021/1,and EP/P025498/1.
文摘Liquefied natural gas storage and transportation as well as space propulsion systems have sparked inter-est in the martensitic transformation and behaviours of 316 L stainless steels(SS)under ultra-cryogenic deformation.In this study,high-resolution transmission electron microscopy(HRTEM)and molecular dy-namics(MD)simulations were used to investigate the atomic arrangements and crystalline defects of deformation-induced γ-austenite→ε-martensite→α'-martensite and γ→α'martensitic transforma-tions in 316 L SS at 15 and 173 K.Theγ→εtransformation involves the glide of Shockley partial dislocations on(111)γplanes without a change in atomic spacing.The formation of anα'inclusion in a singleε-band is achieved by a continuous lattice distortion,accompanied by the formation of a tran-sition zone ofα'and the expansion of the average atomic spacings due to dislocation shuffling.Asα'grows further intoγ,the orientation relationship(OR)of theα'changes by lattice bending.This pro-cess follows the Bogers-Burgers-Olson-Cohen model despite it not occurring on intersecting shear bands.Stacking faults and twins can also serve as nucleation sites forα'at 173 K.We also found that direct transformation of γ→α'occurs by the glide of √6aγ[11(2)]/12 dislocations on every(111)γplane with misfit dislocations.Overall,this study provides,for the first time,insights into the atomic-scale mech-anisms of various two-step and one-step martensitic transformations induced by cryogenic deformation and corresponding local strain,enhancing our understanding of the role of martensitic transformation under ultra-cryogenic-temperature deformation in controlling the properties.
基金supported by the National Natural Science Foundation of China(Nos.52474403,52364050 and 52301137)Guizhou Provincial Program on Commercialization of Scientific and Technological Achievements(No.[2023]001)+2 种基金Guizhou Province Science and Technology Project(No.[2022]050)Guiyang city Science and Technology Project(No.[2023]48-16)the Central Government in Guidance of Local Science and Technology Development Funds(No.[2024]032).
文摘The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HEA),which is mediated by nano-twinning and phase transformation at cryogenic temperatures.During uniaxial tensile deformation at 77 K,the alloy exhibited the formation of high-density deformation nano-twinning,cross-twinning,stacking faults(SFs)and Lomer-Cottrell locks(L-C locks).Additionally,the lower stacking fault energy(SFE)at low temperatures promotes the formation of the 9R phase.The high-density twin boundaries effectively hinder dislocation movement,leading to the instability of plastic deformation and promoting the serrated flow behavior.Furthermore,the rapid and unstable transformation of the 9R phase contributes to the pronounced serrated flow behavior.Nano-twinning,SFs,cross-twinning,L-C locks and 9R phase collectively induce a dynamic Hall-Petch effect,enhancing the strength-ductility synergy and strain-hardening ability of deformed alloy at 77 K.Our work provides valuable insights into the mechanism of tensile deformation at cryogenic temperatures in single-phase FCC HEA.
基金supported by National Key Research&Development Program of China[grant number 2022YFE0110600]National Natural Science Foundation[grant number 52220105003]the State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology[grant number XNDCQQ2910201124].
文摘Magnesium(Mg)alloys typically suffer from cold brittleness at cryogenic temperatures(CT),where strength significantly increases and ductility decreases with decreasing temperature.This study investigates the improvement of the strength-ductility balance at CT in Mg-3.6Y(wt.%)alloys with a bimodal grain structure,consisting of fine dynamically recrystallized(DRXed)grains and elongated unDRXed grains.The results demonstrate that the sample with∼50%DRXed region fraction achieves a remarkable strength-ductility synergy at CT.Dislocation strengthening in the unDRXed regions and grain boundary strengthening in the DRXed regions increase the tensile yield strength(TYS)by 1.6 times at CT compared to room temperature(RT).Concurrently,activation of{10¯12}tensile twinning and non-basal slip systems in DRXed regions,including prismatic a and pyramidal I c+a slips,along with abnormal pyramidal slip within unDRXed grains,reduces fracture elongation by only 1%relative to RT.Furthermore,the bimodal grain structure effectively alleviates strain localization through strain partitioning between DRXed and unDRXed grains,leading to the formation of interface-affected zones(IAZs)that promote the accumulation of geometrically necessary dislocations(GNDs)and enhance hetero-deformation-induced(HDI)hardening.At CT,the IAZs become wider and more pronounced,indicating enhanced GND accumulation that promotes stronger strain partitioning and more effective HDI strengthening.This work demonstrates that the bimodal grain structure is an effective approach to overcoming the low-temperature brittleness of Mg alloys,providing valuable insights for the design of high-performance materials for cryogenic applications.
基金supported by the National Natural Science Foundation of China(Nos.52275322 and 51875127).
文摘In this study,Mg-Gd-Y-(Sm)-Zr(GW-(Sm))alloys were subjected to compression tests at both 293 and 77 K.The effect of Sm addition on the plastic deformation mechanism of Mg-Gd-Y-Zr(GW)alloy was investigated,and a detailed analysis was conducted on the relationships between mechanical responses and the microstructure of the alloys.The findings suggest that dislocation slip plays a predominant role in the plastic deformation of GW-(Sm)alloys.The addition of Sm reduces the stacking fault energy(SFE)of the alloy,which promotes<c+a>slip and inhibits twinning.Meanwhile,Sm plays a role in solution strengthening,causing an elevation in the flow stress of the alloy.At cryogenic temperature(CT),the critical resolved shear stress(CRSS)of dislocation slip is increased,so the dislocation motion requires greater external force.In addition,the extensive crossed twins exhibited in the microstructure,which shorten the dislocation slip path and enhance the grain boundary strengthening.This research contributes to the advancement of plastic deformation theories for magnesium-rare earth(Mg-RE)alloys.
基金supported by Program for Innovative Research Team in Science and Technology in Fujian Province University,Chinathe Natural Science Foundation of Fujian Province,China(Nos.2023J011013,2020J01898)。
文摘The tensile behavior of(Fe_(50)Mn_(30)Co_(10)Cr_(10))_(100-x)Si_(x)(x=0(Si0),2(Si2))metastable HEAs prepared by selective laser melting was studied at cryogenic temperatures.The results demonstrate that the addition of Si leads to lattice distortion and a decrease in stacking fault energy,especially at 77 K,which significantly promotes transformation-induced plasticity(TRIP)in Si2 HEAs.The yield strength,tensile strength,and ductility of Si2 HEAs are 505.2 MPa,1364.1 MPa,and 19%,which are 43%,53% and 58% higher than those of Si0 alloy,respectively.TRIP is the main deformation mode,in addition to dislocation slip,and plays a key role in strengthening.The reinforced and continuously sustained TRIP maintains a dynamic strain distribution during deformation.Ultrahigh strain hardening greatly enhances the strength and ductility.
基金financially supported by the National Key R&D Program of China(Nos.2021YFA1200203,2019YFA0209901)the National Natural Science Foundation of China(Nos.51971112,51822402 and 51225102)+1 种基金the Fundamental Research Funds for the Central Universities(No.30919011405)the LiaoNing Revitalization Talents Program(No.XLYC1807047).
文摘In the present study,a face-centered cubic non-equiatomic Cr_(26)Mn_(20)Fe_(20)Co20Ni_(14) high-entropy alloy(HEA)with a low stacking fault energy of 17.6 mJ m^(−2) was prepared by vacuum induction melting,forging and annealing processes.The recrystallized sample is revealed to exhibit an excellent combination of strength and ductility over a wide temperature range of 4.2–293 K.With decreasing temperature from 293 to 77 K,the ductility and ultimate tensile strength(UTS)gradually increase by 30% to 95% and 137% to 1020 MPa,respectively.At the lowest temperature of 4.2 K,the ductility keeps 65% and the UTS increases by 200% to 1300 MPa,which exceed those published in the literature,including conventional 300 series stainless steels.Detailed microstructural analyses of this alloy reveal a change of deformation mechanisms from dislocation slip and nano-twinning at 293 K to nano-phase transformation at 4.2 K.The cooperation and competition of multiple nano-twinning and nano-phase transformation are responsible for the superior tensile properties at cryogenic temperatures.Our study provides experimental evidence for potential cryogenic applications of HEAs.
基金financially supported by the National Natural Science Foundation of China (Nos. U1832203, 11975202, U1704159 and 51701183)the Key Research & Development and Promotion of Special Project of Henan Province (Science & Technology) (No. 192102210006)。
文摘Recently,high-and medium-entropy alloys(HEAs and MEAs) have been found to exhibit excellent cryogenic mechanical properties,but most of them contain high-priced Co element.Therefore,developing HEAs or MEAs with high strength and ductility and relatively low cost is urgent.In this work,novel Cofree Fex Mn(75-x) Ni(10)Cr(15)(x=50 and 55 at.%) MEAs were developed,which exhibit a good combination of low cost,high strength and ductility at cryogenic temperature.It was found that the Fe(50)Mn(25)Ni(10)Cr(15)MEA exhibits a combination of cryogenic tensile strength of^0.98 GPa and ductility of^83 %.The excellent cryogenic mechanical properties were attributed to joint of twinning-induced plasticity(TWIP) and transformation-induced plasticity(TRIP) effects.The present study sheds light on developing low cost MEAs with high perfo rmance for cryogenic-tempe rature applications.
基金This work was supported by National Research Foundation of Korea(NRF)grants funded by the Korean government(MSIP,South Korea)(No.2019R1A2C1085272).
文摘This study investigates the microstructural characteristics of AZ31 Mg alloys rolled at room temperature(RT)and cryogenic temperature(CT)and the variation in their microstructure and hardness during subsequent annealing.Cryorolling induces the formation of more side cracks than does RT rolling,because of the reduction in the ability of the material to accommodate deformation at CT.Numerous{10-11}contraction and{10-11}-{10-12}double twins are formed in both the material rolled at RT and that rolled at CT,because the grains of the initial material are favorably oriented for{10-11}twinning under rolling.The RT-rolled material has a higher dislocation density than the cryorolled material,and more twins are uniformly distributed throughout the former material.As a result,static recrystallization during subsequent annealing is more pronounced in the RT-rolled material,which results in the formation of a highly recrystallized homogeneous microstructure after annealing.In contrast,the formed twins are predominantly present along the shear bands in the cryorolled material,as a result of which this material has an inhomogeneous bi modal structure containing a large amount of coarse unrecrystallized grains after annealing.The hardness of the annealed RT-rolled material is higher than that of the annealed cryorolled material owing to the finer grain structure of the former.
基金Supported by the National Natural Science Foundation of China(No.51078260 and No.51478309)
文摘To study the bonding properties between steel strand and concrete at room and cryogenic temperatures, a series of center pullout experiments were conducted on 96 bonding anchorage specimens at the lowest temperature of-165 ℃. The impacts on the bonding property of such parameters as the temperature, concrete strength, the relative concrete cover thickness, and the relative anchorage length were analyzed. The test results indicate that the changes in temperature have a clear effect on the bonding property between steel strand and concrete. As the temperature decreases, the bond stress, which corresponds to a 1 mm slip of steel strand in relation to concrete, and the ultimate bond strength initially increase and subsequently decrease at the inflection point of-80 ℃. The impact of the concrete strength on the bonding property, as shown by the tensile strength and the moisture content interaction, indicates that the bond stress vs concrete strength curve initially increases and later decreases with a decrease in temperature; the bond stress vs concrete cover thickness curve linearly increases, but the bond stress vs anchorage length curve linearly decreases at first and finally levels off.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(No.51965044)the Aeronautical Science Foundation of China(No.20185456005).
文摘The effect of cryogenic temperatures on the mechanical properties and fracture mechanism of SnAgCu−SnPb mixed solder joints was investigated.The results showed that the tensile strength of mixed solder joints first increased with the increase of Pb content and reached its maximum at 22.46 wt.%Pb;subsequently,it decreased as Pb content increased.However,cryogenic temperatures improved the tensile strength of the solder joints.Both Pb content and cryogenic temperature caused the fracture mode of the mixed solder joints to change;however,temperature remained the main influencing factor.As the temperature fell from 298 to 123 K,the failure pattern in the solder joints transformed from ductile fracture to quasi-ductile fracture to quasi-brittle fracture and finally,to brittle fracture.
基金We would like to acknowledge the Sao Paulo Research Foundation(FAPESP)(Grant No.2014/15091-7 and 2016/10997-0)the Conselho Nacional de Desenvolvimento Científico e Tecnológico-Brazil(CNPq)(Grant No.449009/2014-9)This study was financed in part by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior-Brazil(CAPES)-Finance Code 001.Danielle Cristina Camilo MAGALHÃES acknowledges CNPq for her PhD scholarship(Grant No.153181/2013-3).
文摘The tensile and fracture behaviors of AA6061 alloy were investigated in order to provide quantitative data about this alloy at cryogenic temperatures.Specimens of AA6061 alloy were solution heat treated before tensile tests at 298,173 and 77 K and tested at strain rates in the range from 0.1 to 0.0001 s^(−1).The results indicate the suppression of the Portevin−Le Chatelier(PLC)effect and dynamic strain aging(DSA)at 77 K.In contrast,at 298 K,a remarkable serrated flow,characteristic of the PLC effect,is observed.Furthermore,the tensile behavior at 77 K,compared with that observed at 173 and 298 K,shows a simultaneous increase in strength,uniform elongation,modulus of toughness,strain-hardening exponent and strain rate sensitivity,which is related to a decrease in the dynamic recovery rate at low temperature.These responses are reflected on the fracture morphology,since the dimple size decreases at 77 K,while the area covered by dimples increases.Comparisons of the Johnson−Cook model show that a good agreement can be obtained for tests at 173 and 77 K,in which DSA is suppressed.
基金financially supported by the National Research Foundation of Korea(NRF-2020R1C1C1003554)the Creative Materials Discovery Program of the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(NRF2016M3D1A1023384)+1 种基金the Korea Institute for Advancement of Technology(KIAT)grant funded by the Korea Government(MOTIE,P0002019,The Competency Development Program for Industry Specialist)support from the German Research Foundation(Deutsche Forschungsgemeinschaft,DFG)under the priority programme 2006“CCA–HEA"。
文摘Multi-principal element alloys usually exhibit outstanding strength and toughness at cryogenic temperatures,especially in CrMnFeCoNi and CrCoNi alloys.These remarkable cryogenic properties are attributed to the occurrence of deformation twins,and it is envisaged that a reduced stacking fault energy(SFE)transforms the deformation mechanisms into advantageous properties at cryogenic temperatures.A recently reported high-strength VCoNi alloy is expected to exhibit further notable cryogenic properties.However,no attempt has been made to investigate the cryogenic properties in detail as well as the underlying deformation mechanisms.Here,the effects of cryogenic temperature on the tensile and impact properties are investigated,and the underlying mechanisms determining those properties are revealed in terms of the temperature dependence of the yield strength and deformation mechanism.Both the strength and ductility were enhanced at 77 K compared to 298 K,while the Charpy impact toughness gradually decreased with temperature.The planar dislocation glides remained unchanged at 77 K in contrast to the CrMnFeCoNi and CrCoNi alloys resulting in a relatively constant and slightly increasing SFE as the temperature decreased,which is confirmed via ab initio simulations.However,the deformation localization near the grain boundaries at 298 K changed into a homogeneous distribution throughout the whole grains at 77 K,leading to a highly sustained strain hardening rate.The reduced impact toughness is directly related to the decreased plastic zone size,which is due to the reduced dislocation width and significant temperature dependence of the yield strength.
基金This work was supported by the National Natural Science Foundation of China(NSFC,Grant No.52071319)the Fundamental Research Project of Shenyang National Laboratory for Materials Science(No.L2019F23).
文摘The mechanical behavior of VCoNi medium-entropy alloys with five different grain sizes at three different temperatures was investigated.The VCoNi alloys with different grain sizes exhibit a traditional strength–ductility trade-off at 77 K,194 K and 293 K.Both the yield strength and the uniform elongation of the VCoNi alloys with similar grain size increase with decreasing the deformation temperature from 293 to 77 K.Obvious strain hardening rate recovery characterized by an evident up-turn behavior at stage II is observed in VCoNi alloys with the grain size above 11.1μm.It is found that the extent of the strain hardening rate recovery increases with increasing grain size or decreasing deformation temperature.This may mainly result from the faster increase in the dislocation multiplication rate caused by the decrease in the dislocation mean free path,the decrease in the absorption of dislocations by grain boundaries and the dynamic recovery from the cross-slip with increasing grain size,as well as the suppressed dynamic recovery at cryogenic temperatures.The critical grain sizes for the occurrence of the recovery of strain hardening rate are determined to be around 9.5μm,8.3μm and 3μm for alloys deformed at 293 K,194 K and 77 K,respectively.The basic mechanism for the strain hardening behavior of the VCoNi alloys associated with grain size and deformation temperature is analyzed.
基金BRNS,Bombay for their financial grant to this work through grant No.BRN-577-MMD
文摘The mechanical properties and microstructural evolution of zircaloy-4 subjected to cumulative strains of 1.48,2.96,4.44 and 5.91 through multiaxial forging（MAF） at cryogenic temperature（77 K） were investigated.The mechanical properties of the MAF treated alloy were measured through universal tensile testing and Vickers hardness testing equipment.The zircaloy-4 deformed up to a cumulative strain of 5.91 showed improvement in both ultimate tensile strength and hardness from 474 MPa to 717 MPa and from HV 190 to HV 238,respectively,as compared with the as-received alloy.However,there was a noticeable decrement in ductility（from 18%to 3.5%） due to the low strain hardening ability of deformed zircaloy-4.The improvement in strength and hardness of the deformed alloy is attributed to the grain size effect and higher dislocation density generated during multiaxial forging.The microstructural evolutions of deformed samples were characterized by optical microscopy and transmission electron microscopy（TEM）.The evolved microstructure at a cumulative strain of 5.91 obtained after MAF up to 12 cycles depicted the formation of ultrafine grains with an average size of 150-250 nm.
基金Item Sponsored by National Natural Science Foundation of China(51401019)China Postdoctoral Science Foundation(2014M550612)+1 种基金Fundamental Research Funds for the Central Universities of China(FRF-TP-14-048A1)Common Construction Project from Beijing Municipal Commission of Education of China(FRF-SD-13-005B)
文摘Twinning greatly affects the microstructure and mechanical performance of titanium alloys.The twinning behavior of a basal textured commercially pure titanium TA2 plates rolled to 4% reduction at the ambient and cryogenic temperatures has been investigated.Microstructures of the rolled samples were investigated by optical microscope（OM）and the twinning analysis was carried out based on orientation data collected by electron back-scatter diffraction（EBSD）.{1122}contraction twins,{1124}contraction twins and {1012}extension twins have been observed.Twinning mode activity varied with rolling temperature.Twinning is considered as the dominant deformation mechanism during rolling at both temperatures for the strain condition.Larger proportion of grains activates twinning during cryorolling,and greater number and more diverse types of twins are observed;manifestly related to the suppression of dislocation slips at the cryogenic temperature.{1122}contraction twins are the dominate twin type within samples rolled at both temperatures.Several{1124}contraction twins are observed in the cryorolled sample while there are only a few in the sample rolled at room temperature.A few tiny{1012}twins have been identified in both samples.{1124}contraction twins are preferentially activated at cryogenic deformation temperature and the{1012}extension twins may result in local strain accommodation.
基金financially supported by the Ministry of Science & Technology of China (No. 2017YFA0204401)the National Natural Science Foundation of China (Nos. ZDYZD201701, 51961012 and 51801064)+2 种基金the Jiangxi Outstanding Young Talents Funding Program (No. 20192BCB23014)the Liaoning Revitalization Talents Program (No. XLYC1808008)the Shenyang National Laboratory for Materials Science (No. 2016RP05)。
文摘Microindentation creep tests on an electrodeposited extremely fine(4.9 nm) nanograined(ng) Ni-14.2 at.% Mo(Ni-14.2 Mo) at both room temperature(RT) and liquid nitrogen temperature(LNT) demonstrated that lowering temperature retarded softening in the ng Ni-Mo alloy. The obtained strain rate sensitivity at LNT was one order of magnitude lower than that at RT. Microstructural characterization revealed that mechanically-driven grain boundary(GB) migration was greatly suppressed by lowering temperature,which might be ascribed to the presence of solute Mo atoms that significantly retarded coupled GB motion at LNT. Deformation was instead carried by shear bands.
基金supported by the National Natural Science Foundation of China(No.11872207)the Aeronautical Science Foundation of China(No.20180952007)+1 种基金the Research Fund of State Key Laboratory of Mechanics and Control of Mechanical Structures(No.MCMS-I-0520G01)the Key Laboratory Foundation of Equipment Pre-Research(No.6142204200307)。
文摘It is widely acknowledged that the performance of a piezoelectric stack would decline with the temperature decreasing,which will exert negative influence on its application in low-temperature environment.Therefore,a convenient and efficient warming structure for the piezoelectric stack is proposed in this paper to solve this problem.Based on the theoretical analysis of heat transfer,two heating modes,namely,overall heating and local heating are analyzed and compared.Moreover,experimental tests are conducted to evaluate the effectiveness of the structure.Based on the results,it can be concluded that the theoretical results are confirmed with experimental results.Besides,the temperature and performance of the piezoelectric stack are kept stable as temperature varies from 10℃to-70℃,which manifests the feasibility of the structure.Therefore,this paper could be an available reference for those engaged in cryogenic investigation of smart materials and structures.
基金supported by the National Natural Science Foundation of China(Nos.92263201,51927801,52001160,and 52205378)the National Key Research&Development Plan(Nos.2020YFA0405900 and 2019YFA0708801)Natural Science Foundation of Jiangsu Province(No.BK20202010).
文摘In this work,we investigated the mechanical properties and corresponding deformation mechanisms of an Al1Mg0.4Si alloy,which exhibited significantly higher strength and outstanding strain hardening capacity at 77 K compared to its counterparts at 298 K.The deformation mechanisms responsible for the excellent strength-ductility synergy and extraordinary strain hardening capacity at cryogenic temperature were elucidated through a combined experimental and simulation study.The results reveal the presence of numerous slip traces and microbands throughout grain surfaces during deformation at 298 K,whereas at 77 K,vague grain surfaces dominate,indicating the simultaneous operation of multiple slip systems.Transmission electron microscopy(TEM)analysis using the two-beam diffraction technique demonstrates the presence of dislocations with several different Burgers vectors inside a grain at cryogenic temperature,confirming the activation of multiple slip systems.The accumulation of dislocations facilitated by these multiple slip systems,combined with the high dislocation density,contributes to strain hardening and remarkable uniform elongation at 77 K.A modified dislocation density-based crystal plasticity model,incorporating the effect of grain boundary hardening(GBH)and temperature,was developed to gain a better understanding of the underlying mechanisms governing alloy’s strength and plasticity.The GBH effect significantly enhances statistically stored dislocation(SSD)density and screw dislocation proportion,which promote homogeneous deformation and enhance strain hardening capacity at cryogenic temperature.These findings deepen the understanding of plastic deformation at cryogenic temperatures and pave the way for the development of ultrahigh-performance metallic materials for cryogenic applications.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61176095 and 61404169)the Youth Innovation Promotion Association of Chinese Academy of Sciences
文摘The experimental results of the cryogenic temperature characteristics on 0.18-μm silicon-on-insulator（SOI） metaloxide-silicon（MOS） field-effect-transistors（FETs） were presented in detail. The current and capacitance characteristics for different operating conditions ranging from 300 K to 10 K were discussed. SOI MOSFETs at cryogenic temperature exhibit improved performance, as expected. Nevertheless, operation at cryogenic temperature also demonstrates abnormal behaviors, such as the impurity freeze-out and series resistance effects. In this paper, the critical parameters of the devices were extracted with a specific method from 300 K to 10 K. Accordingly, some temperature-dependent-parameter models were created to improve fitting precision at cryogenic temperature.
