Evidence for a mantle and/or basaltic component in KT boundary distal ejecta is apparently inconsistent with ejection from Chicxulub Crater since it is located on;5km thick continental crust（De Paolo et al.,1983;Mont...Evidence for a mantle and/or basaltic component in KT boundary distal ejecta is apparently inconsistent with ejection from Chicxulub Crater since it is located on;5km thick continental crust（De Paolo et al.,1983;Montanari et al.,1983;Hildebrand and Boynton,1988,1990）.This evidence,along with ejected terrestrial chromites（Olds et al.,2016）suggest the impact sampled terrestrial mafic and/or ultramafic target rocks which are not known to exist in the Chicxulub target area.Possible resolutions to the paradox are:1)the existence of an unmapped/unknown suture in Yucatan Platform basement,2)an additional small unmapped/unknown impact site on oceanic lithosphere,or 3)an additional large impact on oceanic lithosphere or continental margin transitional to oceanic lithosphere.The third hypothesis is elaborated here since:1)Ophiolites nearest to Chicxulub crater are found in Cuba and apparently were obducted in latest Cretaceous/earliest Danian times（García-Casco,2008）,inconsistent with the documented Eocene collision of Cuba with the Bahamas platform;and 2)Cuba hosts the world’s thickest known KT boundary deposits（Iturralde-Vinent,1992;Kiyokawa et al.,2002;Tada et al.,2003）.These and geometric considerations suggest oceanic crust and upper mantle rock,exposed as ophiolite in the Greater Antilles island chain,marks the rim of a roughly 700 km diameter impact basin deformed and dismembered from an originally circular form by at least 50 million years of left-lateral shear displacement along the North American-Caribbeantransform plate boundary.展开更多
The Tan-Lu Fault Zone is a large NNE-trending fault zone that has a substantial effect on the development of eastern China and its earthquake disaster prevention efforts. Aiming at the azimuthally anisotropic structur...The Tan-Lu Fault Zone is a large NNE-trending fault zone that has a substantial effect on the development of eastern China and its earthquake disaster prevention efforts. Aiming at the azimuthally anisotropic structure in the upper crust and seismogenic tectonics in the Hefei segment of this fault, we collected phase velocity dispersion data of fundamental mode Rayleigh waves from ambient noise cross-correlation functions of ~400 temporal seismographs in an area of approximately 80 × 70 km along the fault zone. The period band of the dispersion data was ~0.5–10 s. We inverted for the upper crustal three-dimensional(3-D) shear velocity model with azimuthal anisotropy from the surface to 10 km depth by using a 3-D direct azimuthal anisotropy inversion method. The inversion result shows the spatial distribution characteristics of the tectonic units in the upper crust. Additionally, the deformation of the Tan-Lu Fault Zone and its conjugated fault systems could be inferred from the anisotropy model. In particular, the faults that have remained active from the early and middle Pleistocene control the anisotropic characteristics of the upper crustal structure in this area. The direction of fast axes near the fault zone area in the upper crust is consistent with the strike of the faults, whereas for the region far away from the fault zone, the direction of fast axes is consistent with the direction of the regional principal stress caused by plate movement. Combined with the azimuthal anisotropy models in the deep crust and uppermost mantle from the surface wave and Pn wave, the different anisotropic patterns caused by the Tan-Lu Fault Zone and its conjugated fault system nearby are shown in the upper and lower crust. Furthermore,by using the double-difference method, we relocated the Lujiang earthquake series, which contained 32 earthquakes with a depth shallower than 10 km. Both the Vs model and earthquake relocation results indicate that earthquakes mostly occurred in the vicinity of structural boundaries with fractured media, with high-level development of cracks and small-scale faults jammed between more rigid areas.展开更多
The Anninghe–Zemuhe Fault and the Xiaojiang Fault are critical active faults along the middle-eastern boundary of the South Chuan–Dian Block. Many researchers have identified these faults as potential strong-earthqu...The Anninghe–Zemuhe Fault and the Xiaojiang Fault are critical active faults along the middle-eastern boundary of the South Chuan–Dian Block. Many researchers have identified these faults as potential strong-earthquake risk zones. In this study, we leveraged a dense seismic array to investigate the high-resolution shallow crust shear wave velocity(Vs) structure beneath the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone, one of the most complex parts of the eastern boundary of the South Chuan–Dian Block. We analyzed the distribution of microseismic events detected between November 2022 and February 2023 based on the fine-scale Vs model obtained. The microseismicity in the study region was clustered into three groups, all spatially related to major faults in this region. These microseismic events indicate near-vertical fault planes, consistent with the fault geometry revealed by other researchers.Moreover, these microseismic events are influenced by the impoundment of the downstream Baihetan Reservoir and the complex tectonic stress near the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone. The depths of these microseismic events are shallower in the junction zone, whereas moving south along the Xiaojiang Fault Zone, the microseismic events become deeper.Additionally, we compared our fine-scale local Vs model with velocity models obtained by other researchers and found that our model offers greater detail in characterizing subsurface heterogeneity while demonstrating improved reliability in delineating fault systems.展开更多
Nail changes following upper extremity transplantation(UET)cannot be overlooked as they possess diagnostic and prognostic relevance in allotransplantation of upper limbs.This comprehensive review explores nail and nai...Nail changes following upper extremity transplantation(UET)cannot be overlooked as they possess diagnostic and prognostic relevance in allotransplantation of upper limbs.This comprehensive review explores nail and nail bed related changes encountered in UET recipients in the literature.The differential diagnosis of nail abnormalities in UET includes a wide range of systemic,local and iatrogenic conditions other than immune responses to the allograft.It requires interdisciplinary evaluation by primary transplant surgeons,pathologists,dermatologists and immunologists.The possible underlying mechanisms of nail pathology in UET and the management are discussed.It also underscores the importance of onychodystrophy and need for timely intervention and to improve outcomes in UET recipients.展开更多
We determine the three-dimensional shear wave velocity structure of the crust and upper mantle in China using Green＇s functions obtained from seismic ambient noise cross-correlation. The data we use are from the Chin...We determine the three-dimensional shear wave velocity structure of the crust and upper mantle in China using Green＇s functions obtained from seismic ambient noise cross-correlation. The data we use are from the China National Seismic Network, global and regional networks and PASSCAL stations in the region. We first acquire cross-correlation seismograms between all possible station pairs. We then measure the Rayleigh wave group and phase dispersion curves using a frequency-time analysis method from 8 s to 60 s. After that, Rayleigh wave group and phase velocity dispersion maps on 1°by 1°spatial grids are obtained at different periods. Finally, we invert these maps for the 3-D shear wave velocity structure of the crust and upper mantle beneath China at each grid node. The inversion results show large-scale structures that correlate well with surface geology. Near the surface, velocities in major basins are anomalously slow, consistent with the thick sediments. East-west contrasts are striking in Moho depth. There is also a fast mid-to-lower crust and mantle lithosphere beneath the major basins surrounding the Tibetan plateau （TP） and Tianshan （Junggar, Tarim, Ordos, and Sichuan）. These strong blocks, therefore, appear to play an important role in confining the deformation of the TP and constraining its geometry to form its current triangular shape. In northwest TP in Qiangtang, slow anomalies extend from the crust to the mantle lithosphere. Meanwhile, widespread, a prominent low-velocity zone is observed in the middle crust beneath most of the central, eastern and southeastern Tibetan plateau, consistent with a weak （and perhaps mobile） middle crust.展开更多
China's continental crust (CCC)has an average thickness of 47km,with the uppercontinental crust (CUCC)being 31 km and the sedimentary layer(CSL)5 km in thickness.The CCC,CUCC and CSL measure 12.437×10^17,8.00...China's continental crust (CCC)has an average thickness of 47km,with the uppercontinental crust (CUCC)being 31 km and the sedimentary layer(CSL)5 km in thickness.The CCC,CUCC and CSL measure 12.437×10^17,8.005×10^17 and 1.146×10^17 metric tons in mass,respectively.The mass ratio of the upper continental crust to the lower one is 1.8:1.The element abundances were calculated for the CCC,CUCC and CSL respectively in terms of the chemical compositions of 2246 samples of various types and some complementary trace element data.The total abundance of 13 major elements accounts for 99.6% of the CCC mass while the other minor elements only account for 0.4%.REE characteristics,the abundance ratios of element pairs and the amounts of ore-forming elements are also discussed in the present paper.展开更多
The three dimensional S wave velocity structure of the crust and upper mantle of Chinese mainland and its neighboring region is obtained by genetic algorithm of surface wave tomography, with smoothness constraint, bas...The three dimensional S wave velocity structure of the crust and upper mantle of Chinese mainland and its neighboring region is obtained by genetic algorithm of surface wave tomography, with smoothness constraint, based on 25 wave group velocities for the periods from 10 s to 92 s, measured from long period Rayleigh waves recorded by 11 stations of CDSN and 12 digital seismometers surrounding China. The S wave velocity image is shown on two latitudinal sections along 30°N and 38°N, two longitudinal sections along 90°E and 120°E, and four horizontal slices at the different depths.展开更多
Based on the long period digital surface wave data recorded by 11 CDSN stations and 11 IRIS stations, the dispersion curves of the group velocities of fundamental mode Rayleigh waves along 647 paths, with the periods ...Based on the long period digital surface wave data recorded by 11 CDSN stations and 11 IRIS stations, the dispersion curves of the group velocities of fundamental mode Rayleigh waves along 647 paths, with the periods from 10 s to 92 s, were measured by multi-filter. Their distribution at 25 central periods within the region of 18~54N, 70~140E was inverted by Dimtar-Yanovskaya method. Within the period from 10 s to 15.9 s, the group velocity distribution is laterally inhomogeneous and is closely related to geotectonic units, with two low velocity zones located in the Tarim basin and the East China Sea and its north regions, respectively. From 21 s to 33 s, the framework of tectonic blocks is revealed. From 36.6 s to 40 s, the lithospheric subdivision of the Chinese mainland is obviously uncovered, with distinct boundaries among the South-North seismic belt, the Tibetan plateau, the North China, the South China and the Northeast China. Four cross-sections of group velocity distribution with period along 30N, 38N, 90E and 120E, are discussed, respectively, which display the basic features of the crust and upper mantle of the Chinese mainland and its neighboring regions. There are distinguished velocity differences among the different tectonic blocks. There are low-velocity-zones (LVZ) in the middle crust of the eastern Tibetan plateau, high velocity featured as stable platform in the Tarim basin and the Yangtze platform, shallow and thick low-velocity-zone in the upper mantle of the North China. The upper mantle LVZ in the East China Sea and the Japan Sea is related to the frictional heat from the subduction of the Philippine slab and the strong extension since the Himalayan orogenic period.展开更多
By analyzing the deep seismic sounding profiles across the Longmen Shan,this paper focuses on the study of the relationship between the upper crust structure of the Longmen Shan area and the Wenchuan earthquake.The Lo...By analyzing the deep seismic sounding profiles across the Longmen Shan,this paper focuses on the study of the relationship between the upper crust structure of the Longmen Shan area and the Wenchuan earthquake.The Longmen Shan thrust belt marks not only the topographical change,but also the lateral velocity variation between the eastern Tibetan Plateau and the Sichuan Basin.A low-velocity layer has consistently been found in the crust beneath the eastern edge of the Tibetan Plateau,and ends beneath the western Sichuan Basin.The low-velocity layer at a depth of-20 km beneath the eastern edge of the Tibetan Plateau has been considered as the deep condition for favoring energy accumulation that formed the great Wenchuan earthquake.展开更多
Investigation has been made for the upper crust structure and seismotectonic environments in Yunnan Province using the plentiful DSS data of the four profiles. The derived velocity model has a good relationship with t...Investigation has been made for the upper crust structure and seismotectonic environments in Yunnan Province using the plentiful DSS data of the four profiles. The derived velocity model has a good relationship with the ex-posed basins, uplifts and faults. The low velocity anomaly corresponding to the volcano also has been revealed. There exists a prominent lateral inhomogeneity within the upper crust of Yunnan region. The depth of crystalline basement generally ranges from 0 km to 5 km, and the bedrocks are exposed on the ground directly in some places, nevertheless the thickness of sedimentary cover also can reach to 8 km or even 12 km at some large depressions. Although the Changning-Shuangjiang fault is a boundary between two first class tectonic units, its incision depth within the crust maybe shallow. On the other hand, known as the plates seam, the Honghe fault has a distinct evi-dence of extending into the mid-lower crust. The widely spread activity of the volcanoes in the geological era has a close relationship with the earthquakes occurrence nowadays. Despite of the ceasing of the volcanoes in some places on the ground, the material in the mid-lower crust is still active, and there still exists strong upward stress. As the ceasing of the volcanoes on the surface, most parts of the power from the lower crust and the upper mantle cannot be released; therefore it accumulates at some appropriate tectonic locations. Moreover, the saturation of the water from the basin, the action of other fluids, and the effects of the outer stress maybe another direct reason ac-count for the strong earthquakes occurrence in Yunnan region.展开更多
Uplift\|related geological and geophysical data available from regional geological mapping , detailed structural, tectonic, granitic, volcanic, metamorphic , geochronological studies, deep seismic reflection, wide\|an...Uplift\|related geological and geophysical data available from regional geological mapping , detailed structural, tectonic, granitic, volcanic, metamorphic , geochronological studies, deep seismic reflection, wide\|angle seismic experiment, seismic tomography, broadband seismic network, and magnetotelluric sounding of key areas of the Qinghai—Tibet plateau are radically different from models of plate subduction or collision. Key geological features include: (1) obvio us time difference between plate collision and uplift of the plateau; (2) developments of intracrustal low\|velocity layers , low resistivity layers and discontinuous subhorizontal reflectors; (3) similar results between the rate and time of uplift of the Qinghai\|Tibet plateau and the time and rate of subsidence of its surrounding basins; (4) subhorizontal detachments and metamorphic core complexes occurred in Himalayan and Longmenshan; (5) weak deformation of late Cenozoic sediments and development of major steeply to gently dipping normal faults in the central part of the plateau; (6) discovery of high pressure and ultrahigh pressure metamorphic rocks in Nanbajiawa; (7) young volcanic rocks distributed from the northern plateau to the southern plateau; (8) nearly concordant processes among thrusting , mountain building, horizontal extension and intrusion of leucogranite in Himalayans.展开更多
The Xiaojiang faults,striking north-tosouth(NS),and the Honghe faults,striking north-to-west(NW),are first-order block boundaries that intersect to form a concentrated stress zone at an acute angle in the southern par...The Xiaojiang faults,striking north-tosouth(NS),and the Honghe faults,striking north-to-west(NW),are first-order block boundaries that intersect to form a concentrated stress zone at an acute angle in the southern part of the Sichuan-Yunnan rhombic block(SYB).It is also a crucial zone for material escaping from the Tibetan Plateau(TP)due to the collision between the Indian Plate and the Eurasian Plate.In December 2017,the Institute of Earthquake Forecasting of the China Earthquake Administration(CEA)deployed a linear temporary seismic broadband array,the Honghe-Xiaojiang temporary Seismic Array(HX Array),across first-order block boundaries in the southern SYB.By using the waveform data of small earthquakes recorded by stations in the HX Array across Xiaojiang faults from 2017 to 2019,and by permanent seismic stations of the China National Earthquake Networks from 2012 to 2019,this paper adopts the systematic analysis method of shear-wave splitting(SWS),SAM method,to obtain preliminary results for seismic anisotropy in the upper crust.The study area can be divided into two subzones according to the spatial distribution of the directions of polarization of the fast shear-wave(PFS)at the stations:the northern zone(zone A,where the HX Array is located)and the southern zone(zone B,to the south of the HX Array).The results show that the directions of the PFS at stations in zone A were highly consistent,dominant in the NE direction,correlated with the in-situ principal compressive stress,and were seemingly unaffected by the Xiaojiang faults.The directions of the PFS as recorded at stations in zone B were more complicated,and were dominant in the NS direction parallel to that of the regional principal compressive stress.This suggests the joint influence of complex tectonics and regional stress in this narrow wedge area.By referring to the azimuthal anisotropy derived from seismic ambient noise in the southeast margin of the TP,the NS direction of the PFS in the middle and lower crust,and its EW direction in the upper mantle,this paper concludes that azimuthal anisotropy in the upper crust differed from that in the lower crust in the south segment of Xiaojiang faults,at least beneath the observation area,and azimuthal anisotropy in the crust was different from that in the upper mantle.The results support the pattern of deformation of ductile flow in the lower crust,and the decoupling between the upper and lower crusts as well as that between the crust and the mantle in the study area.The crustal directions of the PFS appeared to be independent of the Xiaojiang faults,suggesting that the influence of the South China block on the SYB passed through the Xiaojiang faults to the Yimen region.The results of this study indicate that anisotropic studies based on data on the dense temporary seismic array can yield clearer tectonic information,and reveal the complex spatial distribution of stress and deformation in the upper crust of the south segment of Xiaojiang faults.展开更多
Both P- and S-wave arrivals were collected for imaging upper crustal structures in the source region of the April 20, 2013 Lushan earthquake. High-resolution, three- dimensional P and S velocity models were constructe...Both P- and S-wave arrivals were collected for imaging upper crustal structures in the source region of the April 20, 2013 Lushan earthquake. High-resolution, three- dimensional P and S velocity models were constructed by travel-time tomography. Moreover, more than 3700 after- shocks of the Lushan earthquake were relocated via a grid search method. The P- and S-wave velocity images of the upper crust show largely similar characters, with high and low velocity anomalies, which mark the presence of sig- nificant lateral and vertical heterogeneity at the source region of the Lushan earthquake. The characteristics of the velocity anomalies also reflect the associated surface geo- logical tectonics in this region. The distributions of high velocity anomalies of both P- and S-waves to 18 km depth are consistent with the distributions of relocated after- shocks, suggesting that most of the ruptures were localized inside the high velocity region. In contrast, low P and S velocities were found in the surrounding regions without aftershocks, especially in the region to the northeast of the Lushan earthquake. For the relocated aftershocks of the Lushan earthquake from this study, we found that mostaftershocks were concentrated in a zone of about 40 km long and 20 km wide, and were located in the hanging wall of Dayi-Mingshan fault. The focal depths of aftershocks increase from the southeast to the northwest region in the direction perpendicular to the fault strike, suggesting that the fault ruptured at an approximate dip angle of 45°. The main depths of the aftershocks in the northwest of the main shock are significantly shallower than expected, revealing the different seismogenic conditions in the source region.展开更多
Convective pore-fluid flow (CPFF) plays a critical role in generating mineral deposits and oil reservoirs within the deep Earth. Therefore, theoretical understanding and numerical modeling of the thermodynamic process...Convective pore-fluid flow (CPFF) plays a critical role in generating mineral deposits and oil reservoirs within the deep Earth. Therefore, theoretical understanding and numerical modeling of the thermodynamic process that triggers and controls the CPFF are extremely important for the exploration of new mineral deposits and underground oil resources. From the viewpoint of science, the CPFF within the upper crust can be treated as a kind of thermodynamic instability problem of pore-fluid in fluid-saturated porous media. The key issue of dealing with this kind of problem is to assess whether a nonlinear thermodynamic system under consideration is supercritical. To overcome limitations of using theoretical analysis and experimental methods in dealing with the CPFF problems within the upper crust, finite element modeling has been broadly employed for solving this kind of problem over the past two decades. The main purpose of this paper is to overview recent developments and applications of finite element modeling associated with solving the CPFF problems in large length-scale geological systems of complicated geometries and complex material distributions. In particular, two kinds of commonly-used finite element modeling approaches, namely the steady-state and transient-state approaches, and their advantages/disadvantages are thoroughly presented and discussed.展开更多
A three-dimensional temporary seismic transmission array was arranged in a 50x60 km2 region around Jiashi strong earthquake swarm to receive seismic waves generated by 8 fires from different azimuths. With the inversi...A three-dimensional temporary seismic transmission array was arranged in a 50x60 km2 region around Jiashi strong earthquake swarm to receive seismic waves generated by 8 fires from different azimuths. With the inversion method without model blocks and using P and S reflections from Moho at critical distances, the 3-D images of P, S velocity perturbation and ratio vP/vS perturbation of the upper crust under the seismic array were reconstructed. Meanwhile, the seismicity of the Jiashi earthquake swarm was taken into consideration in the analysis of the seismogenesis. The results indicate that the upper crustal structure under the Jiashi strong earthquake swarm region is characterized by significant inhomogeneity both laterally and vertically. From 12 km depth, it is clear that there is an NNW-oriented high P-wave velocity anomalous body corresponding to the epicenter of the swarm with low-velocity anomaly around it, which is the direct cause of the strong earthquakes. High vP/vS is distributed in the same location, which may indicate the decline of shear strength of the source region owing to relative softness of the medium, this can be accounted as an explanation for the seismicity feature of the Jiashi strong earthquake swarm.展开更多
Seismic studies of the crustal structure beneath the Three Gorges Reservoir（TGR） region in Central China have been limited by the sparse and uneven distribution of seismic stations.To in-crease the station coverage,...Seismic studies of the crustal structure beneath the Three Gorges Reservoir（TGR） region in Central China have been limited by the sparse and uneven distribution of seismic stations.To in-crease the station coverage,we made three deployments of a mobile seismologic array in the TGR re-gion during the three summers from 2008 to 2010.Here we present interpretations along a west-east profile through the central TGR region based on new seismic waveform data and a velocity model con-strained by regional earthquake data.Two strong mid-crustal reflection interfaces at depths around 10 and 20 km are seen under the TGR.The shallow reflector defines the bottom of the Zigui（秭归） basin.The new waveform data show that the amplitude of the Moho reflection is quite weak,and beneath the Moho,there is a strong reflector around 54-km depth.It is likely that in the TGR region,the Moho is a gradient rather than a sharp boundary.We speculate that the gradient Moho and the 54-km-deep re-flector in the upper mantle in the TGR region may be by-products of the Qinling（秦岭）-Dabie（大别） orogen.展开更多
Fossils of Orsten-type preservation represented by the crustacean Skaracarida and Phosphatocopida were found in western Hunan, South China in 2005, including the important phosphatocopid species Vestrogothia spinata b...Fossils of Orsten-type preservation represented by the crustacean Skaracarida and Phosphatocopida were found in western Hunan, South China in 2005, including the important phosphatocopid species Vestrogothia spinata based on exquisitely preserved soft-bodied specimens that allow the first growth stage to be reestablished. The taxonomy of Vestrogothia spinata is revised employing the character of a two-divided limb stem of the mandible. A new foundation for the phylogeny of the Phosphatocopina using mandible characters related to crustacean appendages is postulated. Vestrogothia spinata has only previously been found from Sweden.展开更多
The Northeastern Tibetan plateau records Caledonian Qilian orogeny and Cenozoic reactivation by continental collision between the Indian and Asian plates. In order to provide the constraint on the Qilian orogenic mech...The Northeastern Tibetan plateau records Caledonian Qilian orogeny and Cenozoic reactivation by continental collision between the Indian and Asian plates. In order to provide the constraint on the Qilian orogenic mechanism and the expansion of the plateau,wide-angle seismic data was acquired along a 430 km-long profile between Jingtai and Hezuo. There is strong height variation along the profile,which is dealt by topography flattening scheme in our crustal velocity structure reconstruction. We herein present the upper crustal P-wave velocity structure model resulting from the interpretation of first arrival dataset from topography-dependent eikonal traveltime tomography. With topography flattening scheme to process real topography along the profile,the evenness of ray coverage times of the image area（upper crust）is improved,which provides upper crustal velocity model comparable to the classic traveltime tomography（with model expansion scheme to process irregular surface）. The upper crustal velocity model shows zoning character which matcheswith the tectonic division of the Qaidam-Kunlun-West Qinling belt,the Central and Northern Qilian,and the Alax blocks along the profile. The resultant upper crustal P-wave velocity model is expected to provide important base for linkage between the mapped surface geology and deep structure or geodynamics in Northeastern Tibet.展开更多
The magnetotelluric （MT） survey along the Zhada （札达）-Quanshui （泉水） Lake profile on the western margin of the Qinghai （青海）-Tibet plateau shows that the study area is divided into three tectonic provinces ...The magnetotelluric （MT） survey along the Zhada （札达）-Quanshui （泉水） Lake profile on the western margin of the Qinghai （青海）-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong （班公）-Nujiang （怒江） sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang （羌塘） terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo （龙木错） and Geerzangbu are inferred.展开更多
We analyzed teleseismic waveforms recorded by 36 stations near Bohai Sea region and obtained 2 248 high quality receiver functions.The crustal thickness (H) and average crustal vP/vS ratio (κ) as well as the Poisson&...We analyzed teleseismic waveforms recorded by 36 stations near Bohai Sea region and obtained 2 248 high quality receiver functions.The crustal thickness (H) and average crustal vP/vS ratio (κ) as well as the Poisson's ratios beneath 34 stations were estimated using the H-κ stacking method.The results indicate that crustal thicknesses near the Liaoning province range from 30.0 to 35.5 km,and the corresponding vP/vS ratios vary from 1.72 to 1.89 which corresponds to Poisson's ratio with a range from 0.243 to 0.305.We also apply a common conversion point (CCP) stacking method of receiver function (RF) to image the upper mantle discontinuity structure beneath Bohai Sea region.Both the 410-km and the 660-km discontinuities (hereafter called the 410 and the 660) show clearly in the study region.The transition zone (TZ) thickness shows a different picture from the west to the east of the study region,which is a little bit thicker than that of the global average in the west of longitude 122°E,however,thinner in the east of longitude 122°E.We suggested that the dehydration of sinking slab into the lower mantle or a small-scale mantle plume from the lower mantle generated hot upwelling beneath this region.展开更多
文摘Evidence for a mantle and/or basaltic component in KT boundary distal ejecta is apparently inconsistent with ejection from Chicxulub Crater since it is located on;5km thick continental crust（De Paolo et al.,1983;Montanari et al.,1983;Hildebrand and Boynton,1988,1990）.This evidence,along with ejected terrestrial chromites（Olds et al.,2016）suggest the impact sampled terrestrial mafic and/or ultramafic target rocks which are not known to exist in the Chicxulub target area.Possible resolutions to the paradox are:1)the existence of an unmapped/unknown suture in Yucatan Platform basement,2)an additional small unmapped/unknown impact site on oceanic lithosphere,or 3)an additional large impact on oceanic lithosphere or continental margin transitional to oceanic lithosphere.The third hypothesis is elaborated here since:1)Ophiolites nearest to Chicxulub crater are found in Cuba and apparently were obducted in latest Cretaceous/earliest Danian times（García-Casco,2008）,inconsistent with the documented Eocene collision of Cuba with the Bahamas platform;and 2)Cuba hosts the world’s thickest known KT boundary deposits（Iturralde-Vinent,1992;Kiyokawa et al.,2002;Tada et al.,2003）.These and geometric considerations suggest oceanic crust and upper mantle rock,exposed as ophiolite in the Greater Antilles island chain,marks the rim of a roughly 700 km diameter impact basin deformed and dismembered from an originally circular form by at least 50 million years of left-lateral shear displacement along the North American-Caribbeantransform plate boundary.
基金financially supported by the National Key Research and Development Program of China (2022YFC3005600)the Foundation of the Anhui Educational Commission (2023AH051198)+1 种基金the National Natural Science Foundation of China (42125401 and 42104063)the Joint Open Fund of Mengcheng National Geophysical Observatory (MENGO-202201)。
文摘The Tan-Lu Fault Zone is a large NNE-trending fault zone that has a substantial effect on the development of eastern China and its earthquake disaster prevention efforts. Aiming at the azimuthally anisotropic structure in the upper crust and seismogenic tectonics in the Hefei segment of this fault, we collected phase velocity dispersion data of fundamental mode Rayleigh waves from ambient noise cross-correlation functions of ~400 temporal seismographs in an area of approximately 80 × 70 km along the fault zone. The period band of the dispersion data was ~0.5–10 s. We inverted for the upper crustal three-dimensional(3-D) shear velocity model with azimuthal anisotropy from the surface to 10 km depth by using a 3-D direct azimuthal anisotropy inversion method. The inversion result shows the spatial distribution characteristics of the tectonic units in the upper crust. Additionally, the deformation of the Tan-Lu Fault Zone and its conjugated fault systems could be inferred from the anisotropy model. In particular, the faults that have remained active from the early and middle Pleistocene control the anisotropic characteristics of the upper crustal structure in this area. The direction of fast axes near the fault zone area in the upper crust is consistent with the strike of the faults, whereas for the region far away from the fault zone, the direction of fast axes is consistent with the direction of the regional principal stress caused by plate movement. Combined with the azimuthal anisotropy models in the deep crust and uppermost mantle from the surface wave and Pn wave, the different anisotropic patterns caused by the Tan-Lu Fault Zone and its conjugated fault system nearby are shown in the upper and lower crust. Furthermore,by using the double-difference method, we relocated the Lujiang earthquake series, which contained 32 earthquakes with a depth shallower than 10 km. Both the Vs model and earthquake relocation results indicate that earthquakes mostly occurred in the vicinity of structural boundaries with fractured media, with high-level development of cracks and small-scale faults jammed between more rigid areas.
基金funded by the National Key R&D Program of China (Grant No. 2021YFC3000704)the National Natural Science Foundation of China (Grant No. 42125401)the Central Public-interest Scientific Institution Basal Research Fund (Grant No. CEAIEF20240401)。
文摘The Anninghe–Zemuhe Fault and the Xiaojiang Fault are critical active faults along the middle-eastern boundary of the South Chuan–Dian Block. Many researchers have identified these faults as potential strong-earthquake risk zones. In this study, we leveraged a dense seismic array to investigate the high-resolution shallow crust shear wave velocity(Vs) structure beneath the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone, one of the most complex parts of the eastern boundary of the South Chuan–Dian Block. We analyzed the distribution of microseismic events detected between November 2022 and February 2023 based on the fine-scale Vs model obtained. The microseismicity in the study region was clustered into three groups, all spatially related to major faults in this region. These microseismic events indicate near-vertical fault planes, consistent with the fault geometry revealed by other researchers.Moreover, these microseismic events are influenced by the impoundment of the downstream Baihetan Reservoir and the complex tectonic stress near the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone. The depths of these microseismic events are shallower in the junction zone, whereas moving south along the Xiaojiang Fault Zone, the microseismic events become deeper.Additionally, we compared our fine-scale local Vs model with velocity models obtained by other researchers and found that our model offers greater detail in characterizing subsurface heterogeneity while demonstrating improved reliability in delineating fault systems.
文摘Nail changes following upper extremity transplantation(UET)cannot be overlooked as they possess diagnostic and prognostic relevance in allotransplantation of upper limbs.This comprehensive review explores nail and nail bed related changes encountered in UET recipients in the literature.The differential diagnosis of nail abnormalities in UET includes a wide range of systemic,local and iatrogenic conditions other than immune responses to the allograft.It requires interdisciplinary evaluation by primary transplant surgeons,pathologists,dermatologists and immunologists.The possible underlying mechanisms of nail pathology in UET and the management are discussed.It also underscores the importance of onychodystrophy and need for timely intervention and to improve outcomes in UET recipients.
基金supported by National Science Foundation of United States (EAR-0838188) and Department of Geology, UIUCsupported by NSF-EAR award 0944022 and a sub-award from NSF-OISE 0730154
文摘We determine the three-dimensional shear wave velocity structure of the crust and upper mantle in China using Green＇s functions obtained from seismic ambient noise cross-correlation. The data we use are from the China National Seismic Network, global and regional networks and PASSCAL stations in the region. We first acquire cross-correlation seismograms between all possible station pairs. We then measure the Rayleigh wave group and phase dispersion curves using a frequency-time analysis method from 8 s to 60 s. After that, Rayleigh wave group and phase velocity dispersion maps on 1°by 1°spatial grids are obtained at different periods. Finally, we invert these maps for the 3-D shear wave velocity structure of the crust and upper mantle beneath China at each grid node. The inversion results show large-scale structures that correlate well with surface geology. Near the surface, velocities in major basins are anomalously slow, consistent with the thick sediments. East-west contrasts are striking in Moho depth. There is also a fast mid-to-lower crust and mantle lithosphere beneath the major basins surrounding the Tibetan plateau （TP） and Tianshan （Junggar, Tarim, Ordos, and Sichuan）. These strong blocks, therefore, appear to play an important role in confining the deformation of the TP and constraining its geometry to form its current triangular shape. In northwest TP in Qiangtang, slow anomalies extend from the crust to the mantle lithosphere. Meanwhile, widespread, a prominent low-velocity zone is observed in the middle crust beneath most of the central, eastern and southeastern Tibetan plateau, consistent with a weak （and perhaps mobile） middle crust.
文摘China's continental crust (CCC)has an average thickness of 47km,with the uppercontinental crust (CUCC)being 31 km and the sedimentary layer(CSL)5 km in thickness.The CCC,CUCC and CSL measure 12.437×10^17,8.005×10^17 and 1.146×10^17 metric tons in mass,respectively.The mass ratio of the upper continental crust to the lower one is 1.8:1.The element abundances were calculated for the CCC,CUCC and CSL respectively in terms of the chemical compositions of 2246 samples of various types and some complementary trace element data.The total abundance of 13 major elements accounts for 99.6% of the CCC mass while the other minor elements only account for 0.4%.REE characteristics,the abundance ratios of element pairs and the amounts of ore-forming elements are also discussed in the present paper.
基金Chinese Joint Seismological Science Foundation (9507413) the Climbing Plan Project (95-S-05-01) from the State Department of Science and Technology China.
文摘The three dimensional S wave velocity structure of the crust and upper mantle of Chinese mainland and its neighboring region is obtained by genetic algorithm of surface wave tomography, with smoothness constraint, based on 25 wave group velocities for the periods from 10 s to 92 s, measured from long period Rayleigh waves recorded by 11 stations of CDSN and 12 digital seismometers surrounding China. The S wave velocity image is shown on two latitudinal sections along 30°N and 38°N, two longitudinal sections along 90°E and 120°E, and four horizontal slices at the different depths.
基金Climb Project Continental Dynamics of East Asia and Joint Seismological Science Foundation of China (9507413).
文摘Based on the long period digital surface wave data recorded by 11 CDSN stations and 11 IRIS stations, the dispersion curves of the group velocities of fundamental mode Rayleigh waves along 647 paths, with the periods from 10 s to 92 s, were measured by multi-filter. Their distribution at 25 central periods within the region of 18~54N, 70~140E was inverted by Dimtar-Yanovskaya method. Within the period from 10 s to 15.9 s, the group velocity distribution is laterally inhomogeneous and is closely related to geotectonic units, with two low velocity zones located in the Tarim basin and the East China Sea and its north regions, respectively. From 21 s to 33 s, the framework of tectonic blocks is revealed. From 36.6 s to 40 s, the lithospheric subdivision of the Chinese mainland is obviously uncovered, with distinct boundaries among the South-North seismic belt, the Tibetan plateau, the North China, the South China and the Northeast China. Four cross-sections of group velocity distribution with period along 30N, 38N, 90E and 120E, are discussed, respectively, which display the basic features of the crust and upper mantle of the Chinese mainland and its neighboring regions. There are distinguished velocity differences among the different tectonic blocks. There are low-velocity-zones (LVZ) in the middle crust of the eastern Tibetan plateau, high velocity featured as stable platform in the Tarim basin and the Yangtze platform, shallow and thick low-velocity-zone in the upper mantle of the North China. The upper mantle LVZ in the East China Sea and the Japan Sea is related to the frictional heat from the subduction of the Philippine slab and the strong extension since the Himalayan orogenic period.
基金financed by International Sciences and Technology cooperation(2006DFA21340)the special funds for Sciences and technology research of public welfare trades(200811021)+2 种基金the key innovation project for sciences and technology of ministry of land and resources(1212010711813)the Basic outlay of scientific research work from Ministry of Science and Technology of the People's Republic of China(J0803)the National Natural Science Foundation of China(40830316 and 40874045)and SINOPPROBE-02
文摘By analyzing the deep seismic sounding profiles across the Longmen Shan,this paper focuses on the study of the relationship between the upper crust structure of the Longmen Shan area and the Wenchuan earthquake.The Longmen Shan thrust belt marks not only the topographical change,but also the lateral velocity variation between the eastern Tibetan Plateau and the Sichuan Basin.A low-velocity layer has consistently been found in the crust beneath the eastern edge of the Tibetan Plateau,and ends beneath the western Sichuan Basin.The low-velocity layer at a depth of-20 km beneath the eastern edge of the Tibetan Plateau has been considered as the deep condition for favoring energy accumulation that formed the great Wenchuan earthquake.
基金State Scientific and Technological Development program (95-13-02-03).
文摘Investigation has been made for the upper crust structure and seismotectonic environments in Yunnan Province using the plentiful DSS data of the four profiles. The derived velocity model has a good relationship with the ex-posed basins, uplifts and faults. The low velocity anomaly corresponding to the volcano also has been revealed. There exists a prominent lateral inhomogeneity within the upper crust of Yunnan region. The depth of crystalline basement generally ranges from 0 km to 5 km, and the bedrocks are exposed on the ground directly in some places, nevertheless the thickness of sedimentary cover also can reach to 8 km or even 12 km at some large depressions. Although the Changning-Shuangjiang fault is a boundary between two first class tectonic units, its incision depth within the crust maybe shallow. On the other hand, known as the plates seam, the Honghe fault has a distinct evi-dence of extending into the mid-lower crust. The widely spread activity of the volcanoes in the geological era has a close relationship with the earthquakes occurrence nowadays. Despite of the ceasing of the volcanoes in some places on the ground, the material in the mid-lower crust is still active, and there still exists strong upward stress. As the ceasing of the volcanoes on the surface, most parts of the power from the lower crust and the upper mantle cannot be released; therefore it accumulates at some appropriate tectonic locations. Moreover, the saturation of the water from the basin, the action of other fluids, and the effects of the outer stress maybe another direct reason ac-count for the strong earthquakes occurrence in Yunnan region.
文摘Uplift\|related geological and geophysical data available from regional geological mapping , detailed structural, tectonic, granitic, volcanic, metamorphic , geochronological studies, deep seismic reflection, wide\|angle seismic experiment, seismic tomography, broadband seismic network, and magnetotelluric sounding of key areas of the Qinghai—Tibet plateau are radically different from models of plate subduction or collision. Key geological features include: (1) obvio us time difference between plate collision and uplift of the plateau; (2) developments of intracrustal low\|velocity layers , low resistivity layers and discontinuous subhorizontal reflectors; (3) similar results between the rate and time of uplift of the Qinghai\|Tibet plateau and the time and rate of subsidence of its surrounding basins; (4) subhorizontal detachments and metamorphic core complexes occurred in Himalayan and Longmenshan; (5) weak deformation of late Cenozoic sediments and development of major steeply to gently dipping normal faults in the central part of the plateau; (6) discovery of high pressure and ultrahigh pressure metamorphic rocks in Nanbajiawa; (7) young volcanic rocks distributed from the northern plateau to the southern plateau; (8) nearly concordant processes among thrusting , mountain building, horizontal extension and intrusion of leucogranite in Himalayans.
基金This work was supported by the National Natural Science Foundation of China(No.41730212)the National Key R&D Project of China(No.2017YFC1500304)the Basic Research Project of Institute of Earthquake Science,CEA(No.2017IES010202).
文摘The Xiaojiang faults,striking north-tosouth(NS),and the Honghe faults,striking north-to-west(NW),are first-order block boundaries that intersect to form a concentrated stress zone at an acute angle in the southern part of the Sichuan-Yunnan rhombic block(SYB).It is also a crucial zone for material escaping from the Tibetan Plateau(TP)due to the collision between the Indian Plate and the Eurasian Plate.In December 2017,the Institute of Earthquake Forecasting of the China Earthquake Administration(CEA)deployed a linear temporary seismic broadband array,the Honghe-Xiaojiang temporary Seismic Array(HX Array),across first-order block boundaries in the southern SYB.By using the waveform data of small earthquakes recorded by stations in the HX Array across Xiaojiang faults from 2017 to 2019,and by permanent seismic stations of the China National Earthquake Networks from 2012 to 2019,this paper adopts the systematic analysis method of shear-wave splitting(SWS),SAM method,to obtain preliminary results for seismic anisotropy in the upper crust.The study area can be divided into two subzones according to the spatial distribution of the directions of polarization of the fast shear-wave(PFS)at the stations:the northern zone(zone A,where the HX Array is located)and the southern zone(zone B,to the south of the HX Array).The results show that the directions of the PFS at stations in zone A were highly consistent,dominant in the NE direction,correlated with the in-situ principal compressive stress,and were seemingly unaffected by the Xiaojiang faults.The directions of the PFS as recorded at stations in zone B were more complicated,and were dominant in the NS direction parallel to that of the regional principal compressive stress.This suggests the joint influence of complex tectonics and regional stress in this narrow wedge area.By referring to the azimuthal anisotropy derived from seismic ambient noise in the southeast margin of the TP,the NS direction of the PFS in the middle and lower crust,and its EW direction in the upper mantle,this paper concludes that azimuthal anisotropy in the upper crust differed from that in the lower crust in the south segment of Xiaojiang faults,at least beneath the observation area,and azimuthal anisotropy in the crust was different from that in the upper mantle.The results support the pattern of deformation of ductile flow in the lower crust,and the decoupling between the upper and lower crusts as well as that between the crust and the mantle in the study area.The crustal directions of the PFS appeared to be independent of the Xiaojiang faults,suggesting that the influence of the South China block on the SYB passed through the Xiaojiang faults to the Yimen region.The results of this study indicate that anisotropic studies based on data on the dense temporary seismic array can yield clearer tectonic information,and reveal the complex spatial distribution of stress and deformation in the upper crust of the south segment of Xiaojiang faults.
基金supported by Research Project in Earthquake Science(No.201308018,No.201108002)National Natural Science Foundation of China(No.40904012)National Basic Research Program of China(No.2013CB733203,No.2013CB733204)
文摘Both P- and S-wave arrivals were collected for imaging upper crustal structures in the source region of the April 20, 2013 Lushan earthquake. High-resolution, three- dimensional P and S velocity models were constructed by travel-time tomography. Moreover, more than 3700 after- shocks of the Lushan earthquake were relocated via a grid search method. The P- and S-wave velocity images of the upper crust show largely similar characters, with high and low velocity anomalies, which mark the presence of sig- nificant lateral and vertical heterogeneity at the source region of the Lushan earthquake. The characteristics of the velocity anomalies also reflect the associated surface geo- logical tectonics in this region. The distributions of high velocity anomalies of both P- and S-waves to 18 km depth are consistent with the distributions of relocated after- shocks, suggesting that most of the ruptures were localized inside the high velocity region. In contrast, low P and S velocities were found in the surrounding regions without aftershocks, especially in the region to the northeast of the Lushan earthquake. For the relocated aftershocks of the Lushan earthquake from this study, we found that mostaftershocks were concentrated in a zone of about 40 km long and 20 km wide, and were located in the hanging wall of Dayi-Mingshan fault. The focal depths of aftershocks increase from the southeast to the northwest region in the direction perpendicular to the fault strike, suggesting that the fault ruptured at an approximate dip angle of 45°. The main depths of the aftershocks in the northwest of the main shock are significantly shallower than expected, revealing the different seismogenic conditions in the source region.
基金Project(11272359)supported by the National Natural Science Foundation of China
文摘Convective pore-fluid flow (CPFF) plays a critical role in generating mineral deposits and oil reservoirs within the deep Earth. Therefore, theoretical understanding and numerical modeling of the thermodynamic process that triggers and controls the CPFF are extremely important for the exploration of new mineral deposits and underground oil resources. From the viewpoint of science, the CPFF within the upper crust can be treated as a kind of thermodynamic instability problem of pore-fluid in fluid-saturated porous media. The key issue of dealing with this kind of problem is to assess whether a nonlinear thermodynamic system under consideration is supercritical. To overcome limitations of using theoretical analysis and experimental methods in dealing with the CPFF problems within the upper crust, finite element modeling has been broadly employed for solving this kind of problem over the past two decades. The main purpose of this paper is to overview recent developments and applications of finite element modeling associated with solving the CPFF problems in large length-scale geological systems of complicated geometries and complex material distributions. In particular, two kinds of commonly-used finite element modeling approaches, namely the steady-state and transient-state approaches, and their advantages/disadvantages are thoroughly presented and discussed.
基金State Natural Science Foundation of China (49834005), the Project (9691307) from Ministry of Science and Technology and the Chin
文摘A three-dimensional temporary seismic transmission array was arranged in a 50x60 km2 region around Jiashi strong earthquake swarm to receive seismic waves generated by 8 fires from different azimuths. With the inversion method without model blocks and using P and S reflections from Moho at critical distances, the 3-D images of P, S velocity perturbation and ratio vP/vS perturbation of the upper crust under the seismic array were reconstructed. Meanwhile, the seismicity of the Jiashi earthquake swarm was taken into consideration in the analysis of the seismogenesis. The results indicate that the upper crustal structure under the Jiashi strong earthquake swarm region is characterized by significant inhomogeneity both laterally and vertically. From 12 km depth, it is clear that there is an NNW-oriented high P-wave velocity anomalous body corresponding to the epicenter of the swarm with low-velocity anomaly around it, which is the direct cause of the strong earthquakes. High vP/vS is distributed in the same location, which may indicate the decline of shear strength of the source region owing to relative softness of the medium, this can be accounted as an explanation for the seismicity feature of the Jiashi strong earthquake swarm.
基金supported by the National Natural Science Foundation of China (No. 40730317), and China Scholarship Council
文摘Seismic studies of the crustal structure beneath the Three Gorges Reservoir（TGR） region in Central China have been limited by the sparse and uneven distribution of seismic stations.To in-crease the station coverage,we made three deployments of a mobile seismologic array in the TGR re-gion during the three summers from 2008 to 2010.Here we present interpretations along a west-east profile through the central TGR region based on new seismic waveform data and a velocity model con-strained by regional earthquake data.Two strong mid-crustal reflection interfaces at depths around 10 and 20 km are seen under the TGR.The shallow reflector defines the bottom of the Zigui（秭归） basin.The new waveform data show that the amplitude of the Moho reflection is quite weak,and beneath the Moho,there is a strong reflector around 54-km depth.It is likely that in the TGR region,the Moho is a gradient rather than a sharp boundary.We speculate that the gradient Moho and the 54-km-deep re-flector in the upper mantle in the TGR region may be by-products of the Qinling（秦岭）-Dabie（大别） orogen.
基金supported by the NationalNatural Science Foundation of China(Grant Nos.40772008 and 40572003)the Research Fund for DoctoralProgram of High Education(Grant No.20060001059)State Key Laboratory of Palaeobiology and Stratigraphy,Nanjing Institute of Geology and Palaeontology,ChineseAcademy of Sciences(Grant No.083101)
文摘Fossils of Orsten-type preservation represented by the crustacean Skaracarida and Phosphatocopida were found in western Hunan, South China in 2005, including the important phosphatocopid species Vestrogothia spinata based on exquisitely preserved soft-bodied specimens that allow the first growth stage to be reestablished. The taxonomy of Vestrogothia spinata is revised employing the character of a two-divided limb stem of the mandible. A new foundation for the phylogeny of the Phosphatocopina using mandible characters related to crustacean appendages is postulated. Vestrogothia spinata has only previously been found from Sweden.
基金financial support for this work by the Ministry of Science and Technology of China (2011CB808904)the Ministry of Land and Resources of China (SinoProbe-02-02 or 201011041,SinoProbe-03-02 or 201011047)the National Nature Science Foundation of China (41174075,41021063,41274090 and 41174043)
文摘The Northeastern Tibetan plateau records Caledonian Qilian orogeny and Cenozoic reactivation by continental collision between the Indian and Asian plates. In order to provide the constraint on the Qilian orogenic mechanism and the expansion of the plateau,wide-angle seismic data was acquired along a 430 km-long profile between Jingtai and Hezuo. There is strong height variation along the profile,which is dealt by topography flattening scheme in our crustal velocity structure reconstruction. We herein present the upper crustal P-wave velocity structure model resulting from the interpretation of first arrival dataset from topography-dependent eikonal traveltime tomography. With topography flattening scheme to process real topography along the profile,the evenness of ray coverage times of the image area（upper crust）is improved,which provides upper crustal velocity model comparable to the classic traveltime tomography（with model expansion scheme to process irregular surface）. The upper crustal velocity model shows zoning character which matcheswith the tectonic division of the Qaidam-Kunlun-West Qinling belt,the Central and Northern Qilian,and the Alax blocks along the profile. The resultant upper crustal P-wave velocity model is expected to provide important base for linkage between the mapped surface geology and deep structure or geodynamics in Northeastern Tibet.
基金This paper is supported by the National Natural Science Foundation of China (No. 40404006)the Focused Subject Program of Beijing (No. XK104910598).
文摘The magnetotelluric （MT） survey along the Zhada （札达）-Quanshui （泉水） Lake profile on the western margin of the Qinghai （青海）-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong （班公）-Nujiang （怒江） sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang （羌塘） terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo （龙木错） and Geerzangbu are inferred.
基金supported by the National Natural Science Foundation of China grants 40674028 and 40474022
文摘We analyzed teleseismic waveforms recorded by 36 stations near Bohai Sea region and obtained 2 248 high quality receiver functions.The crustal thickness (H) and average crustal vP/vS ratio (κ) as well as the Poisson's ratios beneath 34 stations were estimated using the H-κ stacking method.The results indicate that crustal thicknesses near the Liaoning province range from 30.0 to 35.5 km,and the corresponding vP/vS ratios vary from 1.72 to 1.89 which corresponds to Poisson's ratio with a range from 0.243 to 0.305.We also apply a common conversion point (CCP) stacking method of receiver function (RF) to image the upper mantle discontinuity structure beneath Bohai Sea region.Both the 410-km and the 660-km discontinuities (hereafter called the 410 and the 660) show clearly in the study region.The transition zone (TZ) thickness shows a different picture from the west to the east of the study region,which is a little bit thicker than that of the global average in the west of longitude 122°E,however,thinner in the east of longitude 122°E.We suggested that the dehydration of sinking slab into the lower mantle or a small-scale mantle plume from the lower mantle generated hot upwelling beneath this region.
