Time-averaged thermal convection in a rotating horizontal annulus with a higher temperature at its inner boundary is studied.The centrifugal force plays a stabilizing role,while thermal convection is determined by the...Time-averaged thermal convection in a rotating horizontal annulus with a higher temperature at its inner boundary is studied.The centrifugal force plays a stabilizing role,while thermal convection is determined by the“thermovibrational mechanism”.Convective flow is excited due to oscillations of a non-isothermal rotating fluid.Thermal vibrational convectionmanifests in the form of two-dimensional vortices elongated along the axis of rotation,which develop in a threshold manner with an increase in the amplitude of fluid oscillations.The objective of the present study is to clarify the nature of another phenomenon,i.e.,three-dimensional convective vortices observed in the experiments both before the excitation of the convection described above and in the supercritical region.The experimental study of the oscillatory and the time-averaged flow fields by particle image velocimetry is accompanied by the theoretical research of inertial waves.It is found that three-dimensional fluid flows owe their origin to inertial waves.This is confirmed by a high degree of agreement between the experimental and theoretical results.Experiments with cavities of different lengths indicate that the vortices are clearly seen in cavities thatmeet the conditions of resonant excitation of inertial modes.Furthermore,the length of the cavity has no effect on heat transfer,which is explained by the comparatively low intensity of the wave-induced flows.The main contribution to heat transfer is due to vortices elongated along the axis of rotation.The novel results are of significant practical importance in various fields.展开更多
This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This researc...This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.展开更多
This research focuses on developing innovative hybrid solar dryers that combine solar Photovoltaic(PV)and solar thermal systems for sustainable food preservation in Pakistan,addressing the country’s pressing issues o...This research focuses on developing innovative hybrid solar dryers that combine solar Photovoltaic(PV)and solar thermal systems for sustainable food preservation in Pakistan,addressing the country’s pressing issues of high post-harvest losses and unreliable energy sources.The proposed active hybrid solar dryer features a drying cabinet,two Direct Current(DC)fans for forced convection,and a resistive heating element powered by a 180 W solar PV panel.An energy-storing battery ensures continuous supply to the auxiliaries during periods of low solar irradiance,poor weather conditions,or nighttime.Tomatoes,a delicate and in-demand crop,were selected for experimentation due to their high perishability.Three experiments were conducted on the same prototype:natural convection direct solar dryer(NCDSD),forced convection direct solar dryer(FCDSD),and forced convection hybrid solar dryer(FCHSD).Each experiment began with 0.2 kg of tomatoes at 94%moisture content,achieving significant reductions:28.57%with NCDSD,16.667%with FCDSD,and 16.667%with FCHSD.The observed drying rates varied:1.161 kg/h for NCDSD,2.062 kg/h for FCDSD,and 2.8642 kg/h for FCHSD.This study presents a comparative analysis of efficiency,drying rate,and cost-effectiveness,alongside the system’s economic and environmental feasibility.展开更多
Low-angle grain boundaries(LAGBs)are one of the solidification defects in single-crystal nickel-based superalloys and are detrimental to the mechanical properties.The formation of LAGBs is related to dendrite deformat...Low-angle grain boundaries(LAGBs)are one of the solidification defects in single-crystal nickel-based superalloys and are detrimental to the mechanical properties.The formation of LAGBs is related to dendrite deformation,while the mechanism has not been fully understood at the mesoscale.In this work,a model coupling dendrite growth,thermal-solutal-fluid flow,thermal stress and flow-induced dendrite deformation via cellular automaton-finite volume method and finite element method is developed to study the formation of LAGBs in single crystal superalloys.Results reveal that the bending of dendrites is primarily attributed to the thermal-solutal convection-induced dendrite deformation.The mechanical stress of dendrite deformation develops and stabilises as solidification proceeds.As the width of the mushy zone gets stable,stresses are built up and then dendritic elastoplastic bending occurs at some thin primary dendrites with the wider inter-dendritic space.There are three characteristic zones of stress distribution along the solidification direction:(i)no stress concentration in the fully solidified regions;(ii)stress developing in the primary dendrite bridging region,and(iii)stress decrease in the inter-dendritic uncontacted zone.The stresses reach maximum near the initial dendrite bridging position.The lower temperature gradients,the finer primary dendritic trunks and sudden reductions in local dendritic trunk radius jointly promote the elastoplastic deformation of the dendrites.Corresponding measures are suggested to reduce LAGBs.展开更多
Thermal vibrational convection(TVC)refers to the time-averaged convection of a non-isothermal fluid subjected to oscillating force fields.It serves as an effective mechanism for heat transfer control,particularly unde...Thermal vibrational convection(TVC)refers to the time-averaged convection of a non-isothermal fluid subjected to oscillating force fields.It serves as an effective mechanism for heat transfer control,particularly under microgravity conditions.A key challenge in this field is understanding the effect of rotation on TVC,as fluid oscillations in rotating systems exhibit unique and specific characteristics.In this study,we examine TVC in a vertical flat layer with boundaries at different temperatures,rotating around a horizontal axis.The distinctive feature of this study is that the fluid oscillations within the cavity are not induced by vibrations of the cavity itself,but rather by the gravity field,giving them a tidal nature.Our findings reveal that inertial waves generated in the rotating layer qualitatively alter the TVC structure,producing time-averaged flows in the form of toroidal vortices.Experimental investigations of the structure of oscillatory and time-averaged flows,conducted using Particle Image Velocimetry(PIV)for flow velocity visualization,are complemented by theoretical calculations of inertial modes in a cavity with this geometry.To the best of our knowledge,this study represents the first of its kind.The agreement between experimental results and theoretical predictions confirms that the formation of convective structures in the form of toroidal vortices is driven by inertial waves induced by the gravity field.A decrease in the rotational velocity leads to a transformation of the convective structures,shifting from toroidal vortices of inertial-wave origin to classical cellular TVC.We present dimensionless parameters that define the excitation thresholds for both cellular convection and toroidal structures.展开更多
Solidification structure of casting strands significantly impacts the subsequent processing and service properties of the steel products,which correlates closely with the melt flow during the solidification process.Se...Solidification structure of casting strands significantly impacts the subsequent processing and service properties of the steel products,which correlates closely with the melt flow during the solidification process.Several abnormal solidification phenomena and segregation characteristics observed in slab casting are elucidated by referencing to their related flow patterns of molten steel calculated by a multi-field coupling model for actual casting conditions.Eventually,the effect of forced convection on the solidification structure was discussed.The results show that the forced convection generated by electromagnetic stirring and/or nozzle jet will remove the solute-enriched molten steel between the dendrite in front of the solidifying shell,and change solute distribution at the interface of dendrite tips,leading to the white bands and dendrite deflection.In the white band region,a dense dendrite structure without dendrite segregation appears.Moreover,forced convection results in a higher growth rate on the upstream side than the backflow side of the dendrite tip,promoting the columnar crystal deflection.In addition,dendrite fragmentation upon the forced convection during solidification will increase the equiaxed crystal ratio of the as-cast slab and the number of the spot-like semi-macrosegregation.The carbon extreme range decreased with the change in electromagnetic stirring process,indicating a significant improvement in the composition uniformity of the slab casting.It is suggested that the final quality of rolled products could be improved from the very beginning of casting and solidification through regulating the as-cast solidification structure.展开更多
This study numerically investigates inclined magneto-hydrodynamic natural convection in a porous cavity filled with nanofluid containing gyrotactic microorganisms.The governing equations are nondimensionalized and sol...This study numerically investigates inclined magneto-hydrodynamic natural convection in a porous cavity filled with nanofluid containing gyrotactic microorganisms.The governing equations are nondimensionalized and solved using the finite volume method.The simulations examine the impact of key parameters such as heat source length and position,Peclet number,porosity,and heat generation/absorption on flow patterns,temperature distribution,concentration profiles,and microorganism rotation.Results indicate that extending the heat source length enhances convective currents and heat transfer efficiency,while optimizing the heat source position reduces entropy generation.Higher Peclet numbers amplify convective currents and microorganism distribution complexity.Variations in porosity and heat generation/absorption significantly influence flow dynamics.Additionally,the artificial neural network model reliably predicts the mean Nusselt and Sherwood numbers(Nu&Sh),demonstrating its effectiveness for such analyses.The simulation results reveal that increasing the heat source length significantly enhances heat transfer,as evidenced by a 15%increase in the mean Nusselt number.展开更多
This study investigates laminar convection in three regimes(forced convection,mixed convection,and natural convection)of a bi-nanofluid(Cu-Al_(2)O_(3)-water)/mono-nanofluid(Al_(2)O_(3)-water)inside a square enclosure ...This study investigates laminar convection in three regimes(forced convection,mixed convection,and natural convection)of a bi-nanofluid(Cu-Al_(2)O_(3)-water)/mono-nanofluid(Al_(2)O_(3)-water)inside a square enclosure of sliding vertical walls which are kept at cold temperature and moving up,down,or in opposite directions.The enclosure bottom is heated partially by a central heat source of various sizes while the horizontal walls are considered adiabatic.The thermal conductivity and dynamic viscosity are dependent on temperature and nanoparticle size.The conservation equations are implemented in the solver ANSYS R2(2020).The numerical predictions are successfully validated by comparison with data from the literature.Numerical simulations are carried out for various volume fractions of solid mono/hybrid-nanoparticles(0≤ϕ≤5%),Richardson numbers(0.001≤Ri≤10),and hot source lengths((1/5)H≤ε≤(4/5)H).Isothermal lines,streamlines,and average Nusselt numbers are analyzed.The thermal performance of nanofluids is compared to that of the base heat transfer fluid(water).Outcomes illustrate the flow characteristics significantly affected by the convection regime,hot source size,sidewall motion,and concentration of solid nanoparticles.In the case of sidewalls moving downward,using hybrid nanofluid(Cu-Al_(2)O_(3)-water)shows the highest heat transfer rate in the enclosure at Ri=1,ε=(4/5)H and volume fraction ofφ=5%where a significant increment(25.14%)of Nusselt number is obtained.展开更多
This article explores the optimization of heat transport in a magnetohydrodynamic nanofluid flow with mixedMarangoni convection by using the Response SurfaceMethodology.The convective flow is studied with external mag...This article explores the optimization of heat transport in a magnetohydrodynamic nanofluid flow with mixedMarangoni convection by using the Response SurfaceMethodology.The convective flow is studied with external magnetism,radiative heat flux,and buoyancy.An internal heat absorption through the permeable surface is also taken into account.The governing system includes the continuity equation,Navier-Stokes momentum equation,and the conservation of energy equations,approximated by the Prandtl boundary layer theory.The entropy generation in the thermodynamic system is evaluated.Experimental data(Corcione models)is used to model the single-phase aluminawater nanofluid.The numerical solution for the highly nonlinear differential systemis obtained via Ralston’s algorithm.It is observed that the applied magnetic field leads to a higher entropy generation which is engendered by the Lorentz force within the fluid system.The thermal radiation leads to a higher Bejan number,indicating the importance of the irreversibility of heat transport.Also,the heat absorption process via a permeable surface can be employed to regulate the thermal field.An optimizedNusselt number of 13.4 is obtained at the high levels of radiation,injection,and heat sink parameters.The modeled fluid flow scenario is often seen in drying,coating,and heat exchange processes,especially in microgravity environments.展开更多
The phase-field method is used to study the free dendritic crystal growth under forced convection with hypergravity,the hypergravity term is introduced into the liquid-phase momentum equation to examine the dendritic ...The phase-field method is used to study the free dendritic crystal growth under forced convection with hypergravity,the hypergravity term is introduced into the liquid-phase momentum equation to examine the dendritic growth.The paper focuses on the morphology of dendrite growth as well as the tip radius of the upstream dendritic arm and the average growth velocity of dendrite tips under different hypergravity levels.The results show that the morphology of dendrite changes significantly under represent simulation conditions when the hypergravity reaches 35_(g0),the upstream dendritic arm will bifurcate and the horizontal dendrite arms gradually tilt upwards.This change is mainly caused by the hypergravity and flow changing the temperature field near the dendrite interface.In addition,before the morphology of the dendrite is significantly altered,the radius of the tip of the dendrite upstream arm becomes larger with the increase in hypergravity,and the average growth velocity will increase linearly with it.The morphology of dendritic growth under different hypergravity and the changes in the tip radius along with the average growth velocity of the upstream dendritic tip with hypergravity are given in this paper.Finally,the reasons for these phenomena are analyzed.展开更多
The study considers numerical findings regarding magneto-thermosolutal-aided natural convective flow of alumina/water-based nanofluid filled in a non-Darcian porous horizontal concentric annulus.Two equations are assu...The study considers numerical findings regarding magneto-thermosolutal-aided natural convective flow of alumina/water-based nanofluid filled in a non-Darcian porous horizontal concentric annulus.Two equations are assumed to evaluate the thermal fields in the porous medium under Local Thermal Non-Equilibrium(LTNE)conditions,along with the Darcy-Brinkman-Forchheimer model for the flow.By imposing distinct and constant temperatures and concentrations on both internal and external cylinders,thermosolutal natural convection is induced in the annulus.We apply the finite volume method to solve the dimensionless governing equations numerically.The thermal conductivity and viscosity of the nanofluid mixture are determined utilizing Corcione’s empirical correlations,incorporating the effects of Brownian diffusion of nanoparticles.Steady-state findings are provided for a range of significant parameters,including buoyancy ratio(N=1 to 5),Lewis(Le=0 to 10),Rayleigh(Ra=102 to 105),Hartmann(Ha=0 to 50),and heat generation in the nanofluid and solid phases(Q=0 to 20)when the nanofluid flow is driven by aiding thermal and mass buoyancies at given porous medium characteristics(porosity(ε),Darcy number(Da),porous interfacial heat transfer coefficient(H),and thermal conductivity ratio(γ),to assess the thermosolutal convective circulation beside heat and solutal transfer rates in the annulus.The results reveal that internal heat generation significantly modifies the heat transport mechanism,initially reducing and then enhancing heat transfer rates as Q increases.Interestingly,increasing Le reduces heat transfer at low Q but promotes it when Q>5,while mass transfer consistently increases with Le.The magnetic field represses heat transfer in the absence of internal heat but enhances it when internal heat is present.展开更多
The unsteady magnetohydrodynamical(MHD)free convection flow of an incompressible,electrically conducting hybrid nanofluid within a vertical cylindrical geometry is investigated,incorporating the effects of thermal rad...The unsteady magnetohydrodynamical(MHD)free convection flow of an incompressible,electrically conducting hybrid nanofluid within a vertical cylindrical geometry is investigated,incorporating the effects of thermal radiation,viscous dissipation,and internal heat generation.The system is subjected to a time-periodic boundary temperature condition.The Laplace and finite Hankel transforms are used to derive the exact solutions for the velocity and temperature distributions.The effects of various key physical parameters,including the Richardson number,the Eckert number,the radiation parameter,the heat source parameter,and the nanoparticle volume fraction,are considered.The numerical results reveal that increasing the volume fraction significantly enhances the thermal conductivity and temperature,while the magnetic field intensity and viscous dissipation strongly influence the fluid motion and heat transport.Additionally,the pulsating boundary conditions produce distinct oscillatory behaviors in both the velocity and temperature fields.These findings provide important insights into optimizing the heat transfer performance in cylindrical systems such as electronic cooling modules and energy storage devices operating under dynamic thermal conditions.展开更多
The present work analyzes the linear and weakly nonlinear stability of double-diffusive convection(DDC)in a Navier-Stokes-Voigt(NSV)fluid,considering a chemical reaction and an internal heat source.The lower fluid lay...The present work analyzes the linear and weakly nonlinear stability of double-diffusive convection(DDC)in a Navier-Stokes-Voigt(NSV)fluid,considering a chemical reaction and an internal heat source.The lower fluid layer is salted and heated.The quiescent state and dimensionless variables yield dimensionless parameters for the governing partial differential equations(PDEs).A two-dimensional scenario is investigated using the stream function.Stationary and oscillatory convection can be analyzed using the linear approach.The nonlinear equations are numerically solved using the Runge-Kutta Fehlberg(RKF-45)technique.Additionally,the physics-informed neural network(PINN)validates the mathematical outcomes.The Kelvin-Voigt parameter and the Prandtl number do not affect stationary convection.Thhe neutral stability diagrams show that the ratios of diffusivity,solute Rayleigh,and Kelvin-Voigt parameters stabilize oscillatory convection.However,internal heat and chemical reactions cause instability.The Kelvin-Voigt,internal heat,and chemical reaction parameters increase mass and heat transfer(MHT),while the solute Rayleigh number and the ratio of diffusivity decrease MHT.展开更多
CO_(2)enhanced oil recovery plays an important role in carbon storage and utilization.However,the incomplete understanding of the underlying microscopic convection–diffusion mechanisms in complex pore structures has ...CO_(2)enhanced oil recovery plays an important role in carbon storage and utilization.However,the incomplete understanding of the underlying microscopic convection–diffusion mechanisms in complex pore structures has constrained the broader industrial application of CO_(2)geo-sequestration.This work develops a pore-scale numerical model considering molecular convection–diffusion to investigate CO_(2)-oil miscible displacement in two-and three-dimensional porous structures of conglomerate rocks.The effects of CO_(2)injection rates and pore structure properties on convection–diffusion are analyzed.By reconstructing the distribution of unexploited pores,the CO_(2)sweep efficiency is quantitatively evaluated.Furthermore,a sequestration factor is proposed to evaluate the CO_(2)storage capacity during miscible displacement.Convection significantly enhances the CO_(2)mass fraction in fractures with high flow rates.Subsequently,CO_(2)gradually diffuses into matrix pores without velocity distribution.Both convection and diffusion contribute to improving CO_(2)displacement efficiency.Diffusion facilitates the dissolution of CO_(2)into oil within small-diameter pores,and convection effectively mobilizes oil in large pore bodies.Developed and homogeneous pore structures enhance CO_(2)displacement efficiency,whereas CO_(2)flows along the main flow channels in heterogeneous pore structures,resulting in lower displacement efficiency.Diffusion plays a crucial role in CO_(2)storage within porous media.At low injection rates,dissolved CO_(2)is trapped in poorly connected and blind-end pores.The injection rate is negatively correlated with the sequestration factor.展开更多
A self-developed forced convection rheoforming （FCR） machine for the preparation of light alloy semisolid slurry was introduced. The microstructure characteristics of 7075 aluminium alloy semisolid slurry at differe...A self-developed forced convection rheoforming （FCR） machine for the preparation of light alloy semisolid slurry was introduced. The microstructure characteristics of 7075 aluminium alloy semisolid slurry at different stirring speeds prepared by the FCR process were analyzed. The experimental results suggest that with the increase of the stirring speed, the mean grain size of the semisolid decreases and the shape factor as well as the number of primary grains increase. Meanwhile, the preparation process of semisolid slurry was numerically simulated. The flow characteristics of the melt in the device and the effect of the stirring speed on temperature field and solid fraction of the melt were investigated. The simulated results show that during the preparation process of semisolid slurry, there is a complex convection within the FCR device that obviously changes the temperature field distribution and solid fraction of the melt. When the convection intensity increases, the scope of the undercooling gradient of the melt is reduced and temperature distribution is improved.展开更多
Primary dendrite arm spacing（PDAS） of α phase in directionally solidified Pb-26%Bi（mass fraction） hypo-peritectic alloys was measured by considering the effect of melt convection in cylindrical samples with diffe...Primary dendrite arm spacing（PDAS） of α phase in directionally solidified Pb-26%Bi（mass fraction） hypo-peritectic alloys was measured by considering the effect of melt convection in cylindrical samples with different diameters.The experimental results show the measured PDAS increases with increasing diameter of the sample.At the growth velocity of 5 μm/s,its value changes from 161.5 μm for the sample with 1.8 mm in diameter to 240.4 μm for the sample with 7 mm in diameter.The strong melt convection in large diameter samples causes a high bulk alloy composition and a high concentration gradient in peritectic β phase,resulting in a larger PDAS.Simultaneously,the high concentration gradient could effectively promote the peritectic transformation,enhancing the dissolution of the thin α dendrite.展开更多
In September 2020,a pioneering observational network of three X-band phased-array radars(XPARs)was established in Xiamen,a subtropical coastal and densely populated city in southeastern China.Statistically,this study ...In September 2020,a pioneering observational network of three X-band phased-array radars(XPARs)was established in Xiamen,a subtropical coastal and densely populated city in southeastern China.Statistically,this study demonstrated that the XPAR network outperforms single S-band radar in revealing the warm-season convective storms in Xiamen in a fine-scale manner.The findings revealed that convective activity in Xiamen is most frequent in the central and northern mountainous regions,with lower frequency observed in the southern coastal areas.The diurnal pattern of convection occurrence exhibited a unimodal distribution,with a peak in the afternoon.The frequent occurrence of convective storms correlates well in both time and space with the active terrain uplift that occurs when the prevailing winds encounter mountainous areas.Notably,September stands apart with a bimodal diurnal pattern,featuring a prominent afternoon peak and a significant secondary peak before midnight.Further examination of dense rain gauge data in Xiamen indicates that high-frequency areas of short-duration heavy rainfall largely coincide with regions of active convective storms,except for a unique rainfall hotspot in southern Xiamen,where moderate convection frequency is accompanied by substantial rainfall.This anomalous rainfall,predominantly nocturnal,appears less influenced by terrain uplift and exhibits higher precipitation efficiency than daytime rainfall.These preliminary findings offer insights into the characteristics of convection occurrence in Xiamen's subtropical coastal environment and hold promise for enhancing the accuracy of convection and precipitation forecasts in similar environments.展开更多
We present an experimental study of flow structures in turbulent Rayleigh-Bénard convection in annular cells of aspect ratiosΓ=1,2 and 4,and radius ratio 0.5.The convecting fluid is water with Prandtl number Pr=...We present an experimental study of flow structures in turbulent Rayleigh-Bénard convection in annular cells of aspect ratiosΓ=1,2 and 4,and radius ratio 0.5.The convecting fluid is water with Prandtl number Pr=4.3 and 5.3.Rayleigh number Ra ranges 4.8×10^(7)≤Ra≤4.5×10^(10).The dipole state(two-roll flow structure)forΓ=1 and the quadrupole state(fourroll flow structure)forΓ=2 and 4 are found by multi-temperature-probe measurement.Nusselt number Nu is described by a power-law scaling Nu=0.11Ra^(0.31),which is insensitive to the change of flow structures.However,the Reynolds number Re is influenced by increasing aspect ratios,where Re is found to scale with Ra andΓas Re~Ra^(0.46)Γ^(-0.52).The normalized amplitudes of two flow structures as a function of Ra exist difference.Based on relative weights of the first four modes using the Fourier analysis,we find that the first mode dominates inΓ=1 cell,but the second mode contains the most energy inΓ=2 and 4 cells.With increasingΓ,the flow structures exhibit different characteristics.展开更多
In this work fingering double diffusive convection,i.e.the buoyancy-driven flow with fluid density being affected by two different scalar components,is investigated numerically with special efforts on the influences o...In this work fingering double diffusive convection,i.e.the buoyancy-driven flow with fluid density being affected by two different scalar components,is investigated numerically with special efforts on the influences of the physical properties of two scalar components.We show that different scalar properties can affect the global transport behaviors.The concentration flux exhibits different exponents in their power-law scalings for different combinations of scalar components.The scaling exponents of heat flux,however,depend mainly on the ratio of the diffusivities of two scalars.If one uses the local parameters of the finger layer in the bulk,the behaviors are very similar to those found in the fully periodic simulations.The horizontal width of the fingers is consistent with the wavelength of the fast growing mode.For one case we observe evidences of the thermohaline staircase,namely,the typical width of the flow structures changes significantly in different layers within the flow domain.展开更多
A modified cumulus parameterization scheme, suitable for use in a seasonal forecast model, is presented. This parameterization scheme is an improvement of the mass flux convection scheme developed by Gregory and Rownt...A modified cumulus parameterization scheme, suitable for use in a seasonal forecast model, is presented. This parameterization scheme is an improvement of the mass flux convection scheme developed by Gregory and Rowntree (1989; 1990). This convection scheme uses a 'bulk' cloud model to present an ensemble of convective clouds, and aims to represent shallow, deep, and mid-level convection. At present, this convection scheme is employed in the NCC T63L20 model (National Climate Center, China Meteorological Administration). Simulation results with this scheme have revealed some deficiencies in the scheme, although to some extent, it improves the accuracy of the simulation. In order to alleviate the deficiencies and reflect the effect of cumulus convection in the actual atmosphere, the scheme is modified and improved. The improvements include (i) the full estimation of the effects of the large-scale convergence in the lower layer upon cumulus convection, (ii) the revision of the initial convective mass flux, and (iii) the regulation of convective-scale downdrafts. A comparison of the results obtained by using the original model and the modified one shows that the improvement and modification of the original convection scheme is successful in simulating the precipitation and general circulation field, because the modified scheme provides a good simulation of the main features of seasonal precipitation in China, and an analysis of the anomaly correlation coefficient between the simulation and the observations confirms the improved results.展开更多
基金funded by the Ministry of Education of the Russian Federation within the framework of a state assignment,number 1023032300071-6-2.3.1.
文摘Time-averaged thermal convection in a rotating horizontal annulus with a higher temperature at its inner boundary is studied.The centrifugal force plays a stabilizing role,while thermal convection is determined by the“thermovibrational mechanism”.Convective flow is excited due to oscillations of a non-isothermal rotating fluid.Thermal vibrational convectionmanifests in the form of two-dimensional vortices elongated along the axis of rotation,which develop in a threshold manner with an increase in the amplitude of fluid oscillations.The objective of the present study is to clarify the nature of another phenomenon,i.e.,three-dimensional convective vortices observed in the experiments both before the excitation of the convection described above and in the supercritical region.The experimental study of the oscillatory and the time-averaged flow fields by particle image velocimetry is accompanied by the theoretical research of inertial waves.It is found that three-dimensional fluid flows owe their origin to inertial waves.This is confirmed by a high degree of agreement between the experimental and theoretical results.Experiments with cavities of different lengths indicate that the vortices are clearly seen in cavities thatmeet the conditions of resonant excitation of inertial modes.Furthermore,the length of the cavity has no effect on heat transfer,which is explained by the comparatively low intensity of the wave-induced flows.The main contribution to heat transfer is due to vortices elongated along the axis of rotation.The novel results are of significant practical importance in various fields.
基金Project(52276068)supported by the National Natural Science Foundation of China。
文摘This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.
基金supported by the Ignite National Technology fund,under National Grassroots Initiatives Program of ICT R&D(NIGRI),Project ID.NGIRI-2024-23901 of 2024.
文摘This research focuses on developing innovative hybrid solar dryers that combine solar Photovoltaic(PV)and solar thermal systems for sustainable food preservation in Pakistan,addressing the country’s pressing issues of high post-harvest losses and unreliable energy sources.The proposed active hybrid solar dryer features a drying cabinet,two Direct Current(DC)fans for forced convection,and a resistive heating element powered by a 180 W solar PV panel.An energy-storing battery ensures continuous supply to the auxiliaries during periods of low solar irradiance,poor weather conditions,or nighttime.Tomatoes,a delicate and in-demand crop,were selected for experimentation due to their high perishability.Three experiments were conducted on the same prototype:natural convection direct solar dryer(NCDSD),forced convection direct solar dryer(FCDSD),and forced convection hybrid solar dryer(FCHSD).Each experiment began with 0.2 kg of tomatoes at 94%moisture content,achieving significant reductions:28.57%with NCDSD,16.667%with FCDSD,and 16.667%with FCHSD.The observed drying rates varied:1.161 kg/h for NCDSD,2.062 kg/h for FCDSD,and 2.8642 kg/h for FCHSD.This study presents a comparative analysis of efficiency,drying rate,and cost-effectiveness,alongside the system’s economic and environmental feasibility.
基金sponsored by the National Natural Science Foundation of China(Grant Nos.52074182,52304406 and U23A20612)the Natural Science Foundation of Shanghai(Grant Nos.22ZR1430700 and 23TS1401900)+1 种基金the National Science and Technology Major Project(No.2017-VII-0008-0102)Neng Ren acknowledges the Startup Fund for Young Faculty at SJTU.
文摘Low-angle grain boundaries(LAGBs)are one of the solidification defects in single-crystal nickel-based superalloys and are detrimental to the mechanical properties.The formation of LAGBs is related to dendrite deformation,while the mechanism has not been fully understood at the mesoscale.In this work,a model coupling dendrite growth,thermal-solutal-fluid flow,thermal stress and flow-induced dendrite deformation via cellular automaton-finite volume method and finite element method is developed to study the formation of LAGBs in single crystal superalloys.Results reveal that the bending of dendrites is primarily attributed to the thermal-solutal convection-induced dendrite deformation.The mechanical stress of dendrite deformation develops and stabilises as solidification proceeds.As the width of the mushy zone gets stable,stresses are built up and then dendritic elastoplastic bending occurs at some thin primary dendrites with the wider inter-dendritic space.There are three characteristic zones of stress distribution along the solidification direction:(i)no stress concentration in the fully solidified regions;(ii)stress developing in the primary dendrite bridging region,and(iii)stress decrease in the inter-dendritic uncontacted zone.The stresses reach maximum near the initial dendrite bridging position.The lower temperature gradients,the finer primary dendritic trunks and sudden reductions in local dendritic trunk radius jointly promote the elastoplastic deformation of the dendrites.Corresponding measures are suggested to reduce LAGBs.
基金funded by the Ministry of Education of the Russian Federation within the framework of a state assignment,number 1023032300071-6-2.3.1.
文摘Thermal vibrational convection(TVC)refers to the time-averaged convection of a non-isothermal fluid subjected to oscillating force fields.It serves as an effective mechanism for heat transfer control,particularly under microgravity conditions.A key challenge in this field is understanding the effect of rotation on TVC,as fluid oscillations in rotating systems exhibit unique and specific characteristics.In this study,we examine TVC in a vertical flat layer with boundaries at different temperatures,rotating around a horizontal axis.The distinctive feature of this study is that the fluid oscillations within the cavity are not induced by vibrations of the cavity itself,but rather by the gravity field,giving them a tidal nature.Our findings reveal that inertial waves generated in the rotating layer qualitatively alter the TVC structure,producing time-averaged flows in the form of toroidal vortices.Experimental investigations of the structure of oscillatory and time-averaged flows,conducted using Particle Image Velocimetry(PIV)for flow velocity visualization,are complemented by theoretical calculations of inertial modes in a cavity with this geometry.To the best of our knowledge,this study represents the first of its kind.The agreement between experimental results and theoretical predictions confirms that the formation of convective structures in the form of toroidal vortices is driven by inertial waves induced by the gravity field.A decrease in the rotational velocity leads to a transformation of the convective structures,shifting from toroidal vortices of inertial-wave origin to classical cellular TVC.We present dimensionless parameters that define the excitation thresholds for both cellular convection and toroidal structures.
基金The authors are grateful to Weifang Science and Technology Development Plan Project(2023ZJ1166)for supporting this work.
文摘Solidification structure of casting strands significantly impacts the subsequent processing and service properties of the steel products,which correlates closely with the melt flow during the solidification process.Several abnormal solidification phenomena and segregation characteristics observed in slab casting are elucidated by referencing to their related flow patterns of molten steel calculated by a multi-field coupling model for actual casting conditions.Eventually,the effect of forced convection on the solidification structure was discussed.The results show that the forced convection generated by electromagnetic stirring and/or nozzle jet will remove the solute-enriched molten steel between the dendrite in front of the solidifying shell,and change solute distribution at the interface of dendrite tips,leading to the white bands and dendrite deflection.In the white band region,a dense dendrite structure without dendrite segregation appears.Moreover,forced convection results in a higher growth rate on the upstream side than the backflow side of the dendrite tip,promoting the columnar crystal deflection.In addition,dendrite fragmentation upon the forced convection during solidification will increase the equiaxed crystal ratio of the as-cast slab and the number of the spot-like semi-macrosegregation.The carbon extreme range decreased with the change in electromagnetic stirring process,indicating a significant improvement in the composition uniformity of the slab casting.It is suggested that the final quality of rolled products could be improved from the very beginning of casting and solidification through regulating the as-cast solidification structure.
基金Dean ship of Scientific Research at King Khalid University,Abha,Saudi Arabia,for funding this work through the Research Group Project(Grant No.RGP.2/610/45)funded by the Princess Nourah bint Abdulrahman University Researchers Supporting Project(Grant No.PNURSP2024R102),Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia。
文摘This study numerically investigates inclined magneto-hydrodynamic natural convection in a porous cavity filled with nanofluid containing gyrotactic microorganisms.The governing equations are nondimensionalized and solved using the finite volume method.The simulations examine the impact of key parameters such as heat source length and position,Peclet number,porosity,and heat generation/absorption on flow patterns,temperature distribution,concentration profiles,and microorganism rotation.Results indicate that extending the heat source length enhances convective currents and heat transfer efficiency,while optimizing the heat source position reduces entropy generation.Higher Peclet numbers amplify convective currents and microorganism distribution complexity.Variations in porosity and heat generation/absorption significantly influence flow dynamics.Additionally,the artificial neural network model reliably predicts the mean Nusselt and Sherwood numbers(Nu&Sh),demonstrating its effectiveness for such analyses.The simulation results reveal that increasing the heat source length significantly enhances heat transfer,as evidenced by a 15%increase in the mean Nusselt number.
文摘This study investigates laminar convection in three regimes(forced convection,mixed convection,and natural convection)of a bi-nanofluid(Cu-Al_(2)O_(3)-water)/mono-nanofluid(Al_(2)O_(3)-water)inside a square enclosure of sliding vertical walls which are kept at cold temperature and moving up,down,or in opposite directions.The enclosure bottom is heated partially by a central heat source of various sizes while the horizontal walls are considered adiabatic.The thermal conductivity and dynamic viscosity are dependent on temperature and nanoparticle size.The conservation equations are implemented in the solver ANSYS R2(2020).The numerical predictions are successfully validated by comparison with data from the literature.Numerical simulations are carried out for various volume fractions of solid mono/hybrid-nanoparticles(0≤ϕ≤5%),Richardson numbers(0.001≤Ri≤10),and hot source lengths((1/5)H≤ε≤(4/5)H).Isothermal lines,streamlines,and average Nusselt numbers are analyzed.The thermal performance of nanofluids is compared to that of the base heat transfer fluid(water).Outcomes illustrate the flow characteristics significantly affected by the convection regime,hot source size,sidewall motion,and concentration of solid nanoparticles.In the case of sidewalls moving downward,using hybrid nanofluid(Cu-Al_(2)O_(3)-water)shows the highest heat transfer rate in the enclosure at Ri=1,ε=(4/5)H and volume fraction ofφ=5%where a significant increment(25.14%)of Nusselt number is obtained.
文摘This article explores the optimization of heat transport in a magnetohydrodynamic nanofluid flow with mixedMarangoni convection by using the Response SurfaceMethodology.The convective flow is studied with external magnetism,radiative heat flux,and buoyancy.An internal heat absorption through the permeable surface is also taken into account.The governing system includes the continuity equation,Navier-Stokes momentum equation,and the conservation of energy equations,approximated by the Prandtl boundary layer theory.The entropy generation in the thermodynamic system is evaluated.Experimental data(Corcione models)is used to model the single-phase aluminawater nanofluid.The numerical solution for the highly nonlinear differential systemis obtained via Ralston’s algorithm.It is observed that the applied magnetic field leads to a higher entropy generation which is engendered by the Lorentz force within the fluid system.The thermal radiation leads to a higher Bejan number,indicating the importance of the irreversibility of heat transport.Also,the heat absorption process via a permeable surface can be employed to regulate the thermal field.An optimizedNusselt number of 13.4 is obtained at the high levels of radiation,injection,and heat sink parameters.The modeled fluid flow scenario is often seen in drying,coating,and heat exchange processes,especially in microgravity environments.
基金supported by the National Natural Science Foundation of China(Grant No.52588202)。
文摘The phase-field method is used to study the free dendritic crystal growth under forced convection with hypergravity,the hypergravity term is introduced into the liquid-phase momentum equation to examine the dendritic growth.The paper focuses on the morphology of dendrite growth as well as the tip radius of the upstream dendritic arm and the average growth velocity of dendrite tips under different hypergravity levels.The results show that the morphology of dendrite changes significantly under represent simulation conditions when the hypergravity reaches 35_(g0),the upstream dendritic arm will bifurcate and the horizontal dendrite arms gradually tilt upwards.This change is mainly caused by the hypergravity and flow changing the temperature field near the dendrite interface.In addition,before the morphology of the dendrite is significantly altered,the radius of the tip of the dendrite upstream arm becomes larger with the increase in hypergravity,and the average growth velocity will increase linearly with it.The morphology of dendritic growth under different hypergravity and the changes in the tip radius along with the average growth velocity of the upstream dendritic tip with hypergravity are given in this paper.Finally,the reasons for these phenomena are analyzed.
基金The authors extend their appreciation to the Deanship of Scientific Research at Northern Border University,Arar,Saudi Arabia,for funding this research work through the project number NBU-FFR-2025-2193-15.
文摘The study considers numerical findings regarding magneto-thermosolutal-aided natural convective flow of alumina/water-based nanofluid filled in a non-Darcian porous horizontal concentric annulus.Two equations are assumed to evaluate the thermal fields in the porous medium under Local Thermal Non-Equilibrium(LTNE)conditions,along with the Darcy-Brinkman-Forchheimer model for the flow.By imposing distinct and constant temperatures and concentrations on both internal and external cylinders,thermosolutal natural convection is induced in the annulus.We apply the finite volume method to solve the dimensionless governing equations numerically.The thermal conductivity and viscosity of the nanofluid mixture are determined utilizing Corcione’s empirical correlations,incorporating the effects of Brownian diffusion of nanoparticles.Steady-state findings are provided for a range of significant parameters,including buoyancy ratio(N=1 to 5),Lewis(Le=0 to 10),Rayleigh(Ra=102 to 105),Hartmann(Ha=0 to 50),and heat generation in the nanofluid and solid phases(Q=0 to 20)when the nanofluid flow is driven by aiding thermal and mass buoyancies at given porous medium characteristics(porosity(ε),Darcy number(Da),porous interfacial heat transfer coefficient(H),and thermal conductivity ratio(γ),to assess the thermosolutal convective circulation beside heat and solutal transfer rates in the annulus.The results reveal that internal heat generation significantly modifies the heat transport mechanism,initially reducing and then enhancing heat transfer rates as Q increases.Interestingly,increasing Le reduces heat transfer at low Q but promotes it when Q>5,while mass transfer consistently increases with Le.The magnetic field represses heat transfer in the absence of internal heat but enhances it when internal heat is present.
基金Project supported by the National Natural Science Foundation of China(No.12250410244)the Jiangsu Funding Program for Excellent Postdoctoral Talent of China(No.2023ZB884)+2 种基金the Foreign Expert Project funding of China(No.WGXZ2023017L)the Shuang-Chuang(SC)Doctor Program of Jiangsu Provincethe Longshan Scholar Program of Nanjing University of Information Science&Technology。
文摘The unsteady magnetohydrodynamical(MHD)free convection flow of an incompressible,electrically conducting hybrid nanofluid within a vertical cylindrical geometry is investigated,incorporating the effects of thermal radiation,viscous dissipation,and internal heat generation.The system is subjected to a time-periodic boundary temperature condition.The Laplace and finite Hankel transforms are used to derive the exact solutions for the velocity and temperature distributions.The effects of various key physical parameters,including the Richardson number,the Eckert number,the radiation parameter,the heat source parameter,and the nanoparticle volume fraction,are considered.The numerical results reveal that increasing the volume fraction significantly enhances the thermal conductivity and temperature,while the magnetic field intensity and viscous dissipation strongly influence the fluid motion and heat transport.Additionally,the pulsating boundary conditions produce distinct oscillatory behaviors in both the velocity and temperature fields.These findings provide important insights into optimizing the heat transfer performance in cylindrical systems such as electronic cooling modules and energy storage devices operating under dynamic thermal conditions.
基金the Deanship of Research and Graduate Studies at King Khalid University for funding this work through Large Research Project under grant number RGP.2/403/46
文摘The present work analyzes the linear and weakly nonlinear stability of double-diffusive convection(DDC)in a Navier-Stokes-Voigt(NSV)fluid,considering a chemical reaction and an internal heat source.The lower fluid layer is salted and heated.The quiescent state and dimensionless variables yield dimensionless parameters for the governing partial differential equations(PDEs).A two-dimensional scenario is investigated using the stream function.Stationary and oscillatory convection can be analyzed using the linear approach.The nonlinear equations are numerically solved using the Runge-Kutta Fehlberg(RKF-45)technique.Additionally,the physics-informed neural network(PINN)validates the mathematical outcomes.The Kelvin-Voigt parameter and the Prandtl number do not affect stationary convection.Thhe neutral stability diagrams show that the ratios of diffusivity,solute Rayleigh,and Kelvin-Voigt parameters stabilize oscillatory convection.However,internal heat and chemical reactions cause instability.The Kelvin-Voigt,internal heat,and chemical reaction parameters increase mass and heat transfer(MHT),while the solute Rayleigh number and the ratio of diffusivity decrease MHT.
基金supported by National Natural Science Foundation of China(42172159,52404048)China Postdoctoral Science Foundation(2023M743870)+1 种基金Postdoctoral Fellowship Program of CPSF(GZB20230864)Frontier Interdisciplinary Exploration Research Program of China University of Petroleum,Beijing(2462024XKQY002).
文摘CO_(2)enhanced oil recovery plays an important role in carbon storage and utilization.However,the incomplete understanding of the underlying microscopic convection–diffusion mechanisms in complex pore structures has constrained the broader industrial application of CO_(2)geo-sequestration.This work develops a pore-scale numerical model considering molecular convection–diffusion to investigate CO_(2)-oil miscible displacement in two-and three-dimensional porous structures of conglomerate rocks.The effects of CO_(2)injection rates and pore structure properties on convection–diffusion are analyzed.By reconstructing the distribution of unexploited pores,the CO_(2)sweep efficiency is quantitatively evaluated.Furthermore,a sequestration factor is proposed to evaluate the CO_(2)storage capacity during miscible displacement.Convection significantly enhances the CO_(2)mass fraction in fractures with high flow rates.Subsequently,CO_(2)gradually diffuses into matrix pores without velocity distribution.Both convection and diffusion contribute to improving CO_(2)displacement efficiency.Diffusion facilitates the dissolution of CO_(2)into oil within small-diameter pores,and convection effectively mobilizes oil in large pore bodies.Developed and homogeneous pore structures enhance CO_(2)displacement efficiency,whereas CO_(2)flows along the main flow channels in heterogeneous pore structures,resulting in lower displacement efficiency.Diffusion plays a crucial role in CO_(2)storage within porous media.At low injection rates,dissolved CO_(2)is trapped in poorly connected and blind-end pores.The injection rate is negatively correlated with the sequestration factor.
基金Project (2011CB606302-1) supported by the National Basic Research Program of ChinaProject (2013AA031001) supported by Hi-Tech Research and Development Program of China
文摘A self-developed forced convection rheoforming （FCR） machine for the preparation of light alloy semisolid slurry was introduced. The microstructure characteristics of 7075 aluminium alloy semisolid slurry at different stirring speeds prepared by the FCR process were analyzed. The experimental results suggest that with the increase of the stirring speed, the mean grain size of the semisolid decreases and the shape factor as well as the number of primary grains increase. Meanwhile, the preparation process of semisolid slurry was numerically simulated. The flow characteristics of the melt in the device and the effect of the stirring speed on temperature field and solid fraction of the melt were investigated. The simulated results show that during the preparation process of semisolid slurry, there is a complex convection within the FCR device that obviously changes the temperature field distribution and solid fraction of the melt. When the convection intensity increases, the scope of the undercooling gradient of the melt is reduced and temperature distribution is improved.
基金Project(50395100)supported by the National Natural Science Foundation of ChinaProject(NCET-07-0692)supported by the New Century Talents Program of the Ministry of Education,ChinaProject(34-TP-2009)supported by Open Project of State Key Laboratory of Solidification Processing,China
文摘Primary dendrite arm spacing（PDAS） of α phase in directionally solidified Pb-26%Bi（mass fraction） hypo-peritectic alloys was measured by considering the effect of melt convection in cylindrical samples with different diameters.The experimental results show the measured PDAS increases with increasing diameter of the sample.At the growth velocity of 5 μm/s,its value changes from 161.5 μm for the sample with 1.8 mm in diameter to 240.4 μm for the sample with 7 mm in diameter.The strong melt convection in large diameter samples causes a high bulk alloy composition and a high concentration gradient in peritectic β phase,resulting in a larger PDAS.Simultaneously,the high concentration gradient could effectively promote the peritectic transformation,enhancing the dissolution of the thin α dendrite.
基金Natural Science Foundation of Fujian Province(2023J011338)Guided Foundation of Xiamen Science and Technology Bureau(3502Z20214ZD4009,3502Z20214ZD4010)+1 种基金Key Projects of East China Phased Array Weather Radar Application Joint Laboratory(EPJL_RP2025010)National Natural Science Foundation of China(41905049)。
文摘In September 2020,a pioneering observational network of three X-band phased-array radars(XPARs)was established in Xiamen,a subtropical coastal and densely populated city in southeastern China.Statistically,this study demonstrated that the XPAR network outperforms single S-band radar in revealing the warm-season convective storms in Xiamen in a fine-scale manner.The findings revealed that convective activity in Xiamen is most frequent in the central and northern mountainous regions,with lower frequency observed in the southern coastal areas.The diurnal pattern of convection occurrence exhibited a unimodal distribution,with a peak in the afternoon.The frequent occurrence of convective storms correlates well in both time and space with the active terrain uplift that occurs when the prevailing winds encounter mountainous areas.Notably,September stands apart with a bimodal diurnal pattern,featuring a prominent afternoon peak and a significant secondary peak before midnight.Further examination of dense rain gauge data in Xiamen indicates that high-frequency areas of short-duration heavy rainfall largely coincide with regions of active convective storms,except for a unique rainfall hotspot in southern Xiamen,where moderate convection frequency is accompanied by substantial rainfall.This anomalous rainfall,predominantly nocturnal,appears less influenced by terrain uplift and exhibits higher precipitation efficiency than daytime rainfall.These preliminary findings offer insights into the characteristics of convection occurrence in Xiamen's subtropical coastal environment and hold promise for enhancing the accuracy of convection and precipitation forecasts in similar environments.
基金supported by the National Natural Science Foundation of China(Grants 11988102,11825204,92052201,91852202)the Program of Shanghai Academic Research Leader(Grant 19XD1421400)Science and Technology Innovation Plan Of Shanghai Science and Technology Commission(STCSM)(Project 19JC1412802).
文摘We present an experimental study of flow structures in turbulent Rayleigh-Bénard convection in annular cells of aspect ratiosΓ=1,2 and 4,and radius ratio 0.5.The convecting fluid is water with Prandtl number Pr=4.3 and 5.3.Rayleigh number Ra ranges 4.8×10^(7)≤Ra≤4.5×10^(10).The dipole state(two-roll flow structure)forΓ=1 and the quadrupole state(fourroll flow structure)forΓ=2 and 4 are found by multi-temperature-probe measurement.Nusselt number Nu is described by a power-law scaling Nu=0.11Ra^(0.31),which is insensitive to the change of flow structures.However,the Reynolds number Re is influenced by increasing aspect ratios,where Re is found to scale with Ra andΓas Re~Ra^(0.46)Γ^(-0.52).The normalized amplitudes of two flow structures as a function of Ra exist difference.Based on relative weights of the first four modes using the Fourier analysis,we find that the first mode dominates inΓ=1 cell,but the second mode contains the most energy inΓ=2 and 4 cells.With increasingΓ,the flow structures exhibit different characteristics.
基金supported by the Major Research Plan of National Natural and Science Foundation of China for Turbulent Structures(Grants 91852107 and 91752202).
文摘In this work fingering double diffusive convection,i.e.the buoyancy-driven flow with fluid density being affected by two different scalar components,is investigated numerically with special efforts on the influences of the physical properties of two scalar components.We show that different scalar properties can affect the global transport behaviors.The concentration flux exhibits different exponents in their power-law scalings for different combinations of scalar components.The scaling exponents of heat flux,however,depend mainly on the ratio of the diffusivities of two scalars.If one uses the local parameters of the finger layer in the bulk,the behaviors are very similar to those found in the fully periodic simulations.The horizontal width of the fingers is consistent with the wavelength of the fast growing mode.For one case we observe evidences of the thermohaline staircase,namely,the typical width of the flow structures changes significantly in different layers within the flow domain.
基金supported jointly by the National Science Foundation of China under Grant No.40305010oversea outstanding young scientist project No.2002-1-2 of Chinese Academy of Sciences.
文摘A modified cumulus parameterization scheme, suitable for use in a seasonal forecast model, is presented. This parameterization scheme is an improvement of the mass flux convection scheme developed by Gregory and Rowntree (1989; 1990). This convection scheme uses a 'bulk' cloud model to present an ensemble of convective clouds, and aims to represent shallow, deep, and mid-level convection. At present, this convection scheme is employed in the NCC T63L20 model (National Climate Center, China Meteorological Administration). Simulation results with this scheme have revealed some deficiencies in the scheme, although to some extent, it improves the accuracy of the simulation. In order to alleviate the deficiencies and reflect the effect of cumulus convection in the actual atmosphere, the scheme is modified and improved. The improvements include (i) the full estimation of the effects of the large-scale convergence in the lower layer upon cumulus convection, (ii) the revision of the initial convective mass flux, and (iii) the regulation of convective-scale downdrafts. A comparison of the results obtained by using the original model and the modified one shows that the improvement and modification of the original convection scheme is successful in simulating the precipitation and general circulation field, because the modified scheme provides a good simulation of the main features of seasonal precipitation in China, and an analysis of the anomaly correlation coefficient between the simulation and the observations confirms the improved results.
