Objective: to explore and compare the effects of different health education methods on blood pressure control level of patients with essential hypertension in physical examination center. Methods: 80 patients with ess...Objective: to explore and compare the effects of different health education methods on blood pressure control level of patients with essential hypertension in physical examination center. Methods: 80 patients with essential hypertension were divided into groups by touching the ball in the physical examination center. 40 patients in the control group received basic health education and 40 patients in the observation group received systematic health education. The results were observed and recorded. Results: the blood pressure index of the observation group was lower, and the score of quality of life and nursing satisfaction were higher (P < 0.05). Conclusion: systematic health education plays a very important role in stabilizing and controlling blood pressure. The quality of life of patients is generally improved. They are very satisfied with the nursing model, which is worthy of popularization and use.展开更多
Objective: This paper aims to explore the impact of optimizing details in the operating room on the level of knowledge, attitude, and practice of hospital infection prevention and control by surgeons, as well as the e...Objective: This paper aims to explore the impact of optimizing details in the operating room on the level of knowledge, attitude, and practice of hospital infection prevention and control by surgeons, as well as the effectiveness of infection control. Methods: From January 2022 to June 2023, a total of 120 patients were screened and randomly divided into a control group (routine care and hospital infection management) and a study group (optimizing details in the operating room). Results: Significant differences were found between the two groups in the data of surgeons’ level of knowledge, attitude, and practice in hospital infection prevention and control, infection rates, and nursing satisfaction, with the study group showing better results (P Conclusion: The use of optimizing details in the operating room among surgeons can effectively improve surgeons’ level of knowledge, attitude, and practice in hospital infection prevention and control, reduce infection occurrence, and is worth promoting.展开更多
Level control in flotation columns is an important factor that influences the recovery and the grade of concentrate from the column. A flotation column is a nonlinear, multi-variable problem with changeable parameters...Level control in flotation columns is an important factor that influences the recovery and the grade of concentrate from the column. A flotation column is a nonlinear, multi-variable problem with changeable parameters that traditional methods have difficulty controlling. We have applied fuzzy control methods to the flotation column and tested the performance of the design by Matlab/Simulink simulation. The simulations show that level control in the flotation column becomes smoother and more rapid with the fuzzy controller. Compared to PID control methods the overshoot in valve position, the adjustment time, and the robustness of the controller are all improved. This indicates that it is suitable to model fuzzy controllers in applications for the study of automatic control of flotation column.展开更多
The accurate control for the vehicle height and leveling adjustment system of an electronic air suspension(EAS) still is a challenging problem that has not been effectively solved in prior researches. This paper propo...The accurate control for the vehicle height and leveling adjustment system of an electronic air suspension(EAS) still is a challenging problem that has not been effectively solved in prior researches. This paper proposes a new adaptive controller to control the vehicle height and to adjust the roll and pitch angles of the vehicle body(leveling control) during the vehicle height adjustment procedures by an EAS system. A nonlinear mechanism model of the full?car vehicle height adjustment system is established to reflect the system dynamic behaviors and to derive the system optimal control law. To deal with the nonlinear characters in the vehicle height and leveling adjustment processes, the nonlinear system model is globally linearized through the state feedback method. On this basis, a fuzzy sliding mode controller(FSMC) is designed to improve the control accuracy of the vehicle height adjustment and to reduce the peak values of the roll and pitch angles of the vehicle body. To verify the effectiveness of the proposed control method more accurately, the full?car EAS system model programmed using AMESim is also given. Then, the co?simulation study of the FSMC performance can be conducted. Finally, actual vehicle tests are performed with a city bus, and the test results illustrate that the vehicle height adjustment performance is effectively guaranteed by the FSMC, and the peak values of the roll and pitch angles of the vehicle body during the vehicle height adjustment procedures are also reduced significantly. This research proposes an effective control methodology for the vehicle height and leveling adjustment system of an EAS, which provides a favorable control performance for the system.展开更多
In this paper, simulated and experimental results on the conical tank level control are presented. PI/PID controllers of integer order （IO） as well as of fractional order （FO） are studied and compared. The tuning ...In this paper, simulated and experimental results on the conical tank level control are presented. PI/PID controllers of integer order （IO） as well as of fractional order （FO） are studied and compared. The tuning parameters are obtained first by using root locus （RL） and Ziegler and Nichols methods, for comparison purposes. Next, particle swarm optimization （PSO） is employed to determine the optimal controllers＇ parameters using as fitness function the integral of the absolute value of tracking error （IAE）. From the experimental results it is concluded that PI/FOPI are the controllers presenting the lowest IAE indexes, whereas PID/FOPID controllers present the lowest energy consumption by the control signal.展开更多
An intelligent fuzzy-PID controller consisting of fuzzy logic controller and PID controller was developed to control the molten steel level of twin-roll strip caster.Additionally,a feedforward differential PID control...An intelligent fuzzy-PID controller consisting of fuzzy logic controller and PID controller was developed to control the molten steel level of twin-roll strip caster.Additionally,a feedforward differential PID controller was used for stopper position control in order to avoid differential kick.It is proved by simulation that the proposed intelligent controller is able to obtain zero steady state error asymptotically and the control system is robust due to its fuggy behavior of the controller.展开更多
Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility （ABSL-2）, c...Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility （ABSL-2）, commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented.展开更多
Research on level 2 control system of 100 tons LF furnace was carried out. According to the principle of energy conservation and principle of mass conservation, the LF temperature prediction model and the composition ...Research on level 2 control system of 100 tons LF furnace was carried out. According to the principle of energy conservation and principle of mass conservation, the LF temperature prediction model and the composition prediction model were established. At the same time, the set value calculated by heating model and addition model could be sent to PLC. The results show that the technical indexes of LF furnace level 2 control system reach the demand and the system realizes automatic control.展开更多
In this paper, a new analysis and design method for proportional-integrative-derivative （PID） tuning is proposed based on controller scaling analysis. Integral of time absolute error （ITAE） index is minimized for ...In this paper, a new analysis and design method for proportional-integrative-derivative （PID） tuning is proposed based on controller scaling analysis. Integral of time absolute error （ITAE） index is minimized for specified gain and phase margins （GPM） constraints, so that the transient performance and robustness are both satisfied. The requirements on gain and phase margins are ingeniously formulated by real part constraints （RPC） and imaginary part constraints （IPC）. This set of new constraints is simply related with three parameters and decoupling of the remaining four unknowns, including three controller parameters and the gain margin, in the nonlinear and coupled characteristic equation simultaneously. The formulas of the optimal GPM-PID are derived based on controller scaling analysis. Finally, this method is applied to liquid level control of coke fractionation tower, which demonstrate that the proposed method provides better disturbance rejection and robust tracking performance than some commonly used PID tuning methods.展开更多
Tank level control is ubiquitous in industry. The focus of this paper is on accurate liquid level control in single tank systems which can be actuated continuously and modulation of the level setpoint is also required...Tank level control is ubiquitous in industry. The focus of this paper is on accurate liquid level control in single tank systems which can be actuated continuously and modulation of the level setpoint is also required, for example in cascade control loops or supervisory Model Predictive Control (MPC) applications. To avoid common problems encountered when using fixed gain or adaptive/gain scheduled schemes, an accurate technique based around feedback linearization and Proportional Integral (PI) control is introduced. This simple controller can maintain linear performance over the full operating range of a uniform tank. As will be demonstrated, the implementation overhead compared to a regular PI controller is negligible, making it ideal for industrial implementation. Implementation details and parameter identification for adaptive implementation are discussed. Simulations coupled with experimental results using a large-scale laboratory level control system using commercial industrial control equipment validate the approach, and illustrate its effectiveness for both level tracking and disturbance rejection.展开更多
The aim of the present study was to implant an efficient strategy for controlling the level of the effluent-oily foam interface in a DAF （dissolved air flotation） chamber of a pilot-scale prototype. DAF has been suc...The aim of the present study was to implant an efficient strategy for controlling the level of the effluent-oily foam interface in a DAF （dissolved air flotation） chamber of a pilot-scale prototype. DAF has been successfully used in the treatment of oily water, which is one of the main environmental problems in different industrial facilities. Along with important operational parameters, such as microbubble size and flow rate, the control strategy for the automation of a DAF chamber may be an important tool for increasing efficiency. Controlling the level was the strategy chosen to enhance the separation efficiency in a pilot-scale DAF prototype, with monitoring performed using a computational program in LabVIEW （laboratory virtual instrument engineering workbench）. The findings demonstrate that it is possible to maintain the level of the fluid at a reference value established by the operator using the software program through the application of classic proportional integral derivative controllers. Using this control tool, the efficiency of water-oil separation in the pilot flotation chamber prototype was increased to nearly 98%.展开更多
In order to achieve an automatic leveling function for work platforms of aerial vehicles with mixed-booms( MAV) in full elevating domain,an auto-leveling mechanism for the platform is proposed based on a control metho...In order to achieve an automatic leveling function for work platforms of aerial vehicles with mixed-booms( MAV) in full elevating domain,an auto-leveling mechanism for the platform is proposed based on a control method of booms-constraint,where mixed-boom structures and elevating characteristics are considered. Three models of constraint strategies include non-constraint model,elevating constraint model and lowering constraint model,which is designed to meet the leveling requirements in full working extent. Through the hydro-mechatronic unified modeling,a virtual prototype model is set up based on the auto-leveling mechanism,and leveling performances of the platform are studied during booms elevating to the maximum working height and extent. Simulation results show that the control method of booms-constraint can realize auto-leveling of the platform under two typical working conditions,meanwhile a leveling deviation appears at the constrained point,but the platform inclination is adjusted in the permissible range. The control method does not only restrict booms' freedom elevating to a certain extent,but also impacts the booms extending to the maximum working range. Experimental results verify that the auto-leveling mechanism based on booms-constraint control is valid and rational,which provides an effective technology approach for development of the platform leveling of MAV.展开更多
We investigated optically controllable gray-level diffraction from a body-centered tetragonal photonic crystal that was based on an azo-dye-doped holographic polymer dispersed liquid crystal. The sample is fabricated ...We investigated optically controllable gray-level diffraction from a body-centered tetragonal photonic crystal that was based on an azo-dye-doped holographic polymer dispersed liquid crystal. The sample is fabricated by use of two-beam interference with multi-exposure. Bichromatic pumping beams at various intensities were used to pump the sample to change the concentration of the cis isomer and, in turn, modulate the effective index of the photonic crystals as well as their diffraction intensity. Three pumping processes were utilized to produce gray-level switching of diffractive light. This study demonstrates the optimum gray-level to be 15-level of up-step and down-step. The simulation of the diffraction intensity under bichromatic pumping sources was also studied.展开更多
Due to its inherent safety feature, the modular high temperature gas-cooled reactor (MHTGR) has been seen as one of the best candidates in building next generation nuclear plants (NGNPs). Since the MHTGR dynamics has ...Due to its inherent safety feature, the modular high temperature gas-cooled reactor (MHTGR) has been seen as one of the best candidates in building next generation nuclear plants (NGNPs). Since the MHTGR dynamics has high nonlinearity, it is necessary to develop nonlinear power-level controller which is not only beneficial to the safe, stable, efficient and autonomous operation of the MHTGR but also easy to be implemented practically. In this paper, based on the concept of shiftedectropy and the physically-based control design approach, it is proved theoretically that the simple proportional-differential (PD) output-feedback power-level control can provide globally asymptotic closed-loop stability. Numerical simulation results verify the theoretical results and show the influence of the controller parameters to the dynamic response.展开更多
Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. Ho...Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. However, the problem of complexity of selecting vectors and capacitor voltage unbalance needs to be solved when the algorithm of direct torque control （DTC） is implemented on DCMLI. In this paper, a fuzzy DTC system of an induction machine fed by a three-level neutral-point-clamped （NPC） inverter is proposed. After introducing fuzzy logic, optimal selecting switching state is realized by applying various strategies which can distinguish the grade of the errors of stator flux linkage, torque, the neutral-point potential, and the position of stator flux linkage. Consequently, the neutral-point potential unbalance, the dr/dr of output voltage and the switching loss are restrained effectively, and desirable dynamic and steady-state performances of induction machines can be obtained for the DTC scheme. A design method of the fuzzy controller is introduced in detail, and the relevant simulation and experimental results have verified the feasibility of the proposed control algorithm.展开更多
To our knowledge,no single study has systemically compared cryopreservation efficiencies of bovine blastocysts derived from in vitro fertilization （IVF）,intracytoplasmic sperm injection （ICSI） and somatic cell nuc...To our knowledge,no single study has systemically compared cryopreservation efficiencies of bovine blastocysts derived from in vitro fertilization （IVF）,intracytoplasmic sperm injection （ICSI） and somatic cell nuclear transfer （SCNT） by controlled freezing and vitrification.This experiment,therefore,was designed to compare the cryopreservation of these blastocysts with controlled freezing and OPS vitrification.Adenosine-5’-triphosphate （ATP） content and reactive oxygen species （ROS） level in blastocysts were also analyzed.Firstly,for each type of blastocyst （IVF,ICSI or SCNT）,significant differences were observed between the survival rates of the controlled freezing （（81.56±2.33）,（68.18±4.72） or （47.89±5.83）%） and OPS vitrification groups （（92.24±4.54）,（82.40±3.76） or （78.71±5.91）%;P〈0.05）.Secondly,for each type of blastocyst （IVF,ICSI or SCNT）,ATP content was significantly decreased after controlled freezing or vitrification,and the ATP content in the controlled freezing group （0.43±0.06）,（0.35±0.05） or （0.21±0.02） pmol） was significantly lower than that found in the OPS vitrification group （0.62±0.04）,（0.46±0.03） or （0.30±0.01） pmol;P〈0.05）.Thirdly,ROS level in fresh IVF （（47.33±3.56） c.p.s （counted photons per second）,ICSI （（36.51±2.58） c.p.s） or SCNT blastocysts （（26.44±1.49） c.p.s） was significantly lower than that found in the OPS vitrification group （（72.14±4.31）,（58.89±3.89） or （40.11±5.73） c.p.s;P〈0.05）,but higher than that of the controlled freezing group （34.41±3.32）,（23.13±1.26） or （15.46±2.45） c.p.s;P〈0.05）.The present study indicated that vitrification is more efficient in the cryopreservation of bovine blastocysts derived from IVF,ICSI or SCNT than controlled freezing.Furthermore,both vitrification and controlled freezing significantly altered the ATP content and ROS level in those blastocysts.展开更多
In this paper, a voltage oriented control strategy for three-level PWM rectifier based on Sliding Mode Control (SMC) is introduced in order to obtain fast and accurate response of dc-bus voltage. To verify the validit...In this paper, a voltage oriented control strategy for three-level PWM rectifier based on Sliding Mode Control (SMC) is introduced in order to obtain fast and accurate response of dc-bus voltage. To verify the validity of the analysis and the feasibility of the proposed control method a set of simulation tests have been conducted using Matlab/Simulink. The simulation results show that compared to the conventional PI controller, the SMC can reduce drastically the three-level rectifier’s voltage fluctuation and improve the dynamic response of dc-bus significantly.展开更多
文摘Objective: to explore and compare the effects of different health education methods on blood pressure control level of patients with essential hypertension in physical examination center. Methods: 80 patients with essential hypertension were divided into groups by touching the ball in the physical examination center. 40 patients in the control group received basic health education and 40 patients in the observation group received systematic health education. The results were observed and recorded. Results: the blood pressure index of the observation group was lower, and the score of quality of life and nursing satisfaction were higher (P < 0.05). Conclusion: systematic health education plays a very important role in stabilizing and controlling blood pressure. The quality of life of patients is generally improved. They are very satisfied with the nursing model, which is worthy of popularization and use.
文摘Objective: This paper aims to explore the impact of optimizing details in the operating room on the level of knowledge, attitude, and practice of hospital infection prevention and control by surgeons, as well as the effectiveness of infection control. Methods: From January 2022 to June 2023, a total of 120 patients were screened and randomly divided into a control group (routine care and hospital infection management) and a study group (optimizing details in the operating room). Results: Significant differences were found between the two groups in the data of surgeons’ level of knowledge, attitude, and practice in hospital infection prevention and control, infection rates, and nursing satisfaction, with the study group showing better results (P Conclusion: The use of optimizing details in the operating room among surgeons can effectively improve surgeons’ level of knowledge, attitude, and practice in hospital infection prevention and control, reduce infection occurrence, and is worth promoting.
基金support from the Fundamental Research Funds for the Central Universitiesthe National Key Technology R & D Program in the 11th Five Year Plan of China (No. 2008BAB31B03)
文摘Level control in flotation columns is an important factor that influences the recovery and the grade of concentrate from the column. A flotation column is a nonlinear, multi-variable problem with changeable parameters that traditional methods have difficulty controlling. We have applied fuzzy control methods to the flotation column and tested the performance of the design by Matlab/Simulink simulation. The simulations show that level control in the flotation column becomes smoother and more rapid with the fuzzy controller. Compared to PID control methods the overshoot in valve position, the adjustment time, and the robustness of the controller are all improved. This indicates that it is suitable to model fuzzy controllers in applications for the study of automatic control of flotation column.
基金Supported by National Natural Science Foundation of China(Grant Nos.51375212,61601203)Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions of China+1 种基金Key Research and Development Program of Jiangsu Province(BE2016149)Jiangsu Provincial Natural Science Foundation of China(BK20140555)
文摘The accurate control for the vehicle height and leveling adjustment system of an electronic air suspension(EAS) still is a challenging problem that has not been effectively solved in prior researches. This paper proposes a new adaptive controller to control the vehicle height and to adjust the roll and pitch angles of the vehicle body(leveling control) during the vehicle height adjustment procedures by an EAS system. A nonlinear mechanism model of the full?car vehicle height adjustment system is established to reflect the system dynamic behaviors and to derive the system optimal control law. To deal with the nonlinear characters in the vehicle height and leveling adjustment processes, the nonlinear system model is globally linearized through the state feedback method. On this basis, a fuzzy sliding mode controller(FSMC) is designed to improve the control accuracy of the vehicle height adjustment and to reduce the peak values of the roll and pitch angles of the vehicle body. To verify the effectiveness of the proposed control method more accurately, the full?car EAS system model programmed using AMESim is also given. Then, the co?simulation study of the FSMC performance can be conducted. Finally, actual vehicle tests are performed with a city bus, and the test results illustrate that the vehicle height adjustment performance is effectively guaranteed by the FSMC, and the peak values of the roll and pitch angles of the vehicle body during the vehicle height adjustment procedures are also reduced significantly. This research proposes an effective control methodology for the vehicle height and leveling adjustment system of an EAS, which provides a favorable control performance for the system.
文摘In this paper, simulated and experimental results on the conical tank level control are presented. PI/PID controllers of integer order （IO） as well as of fractional order （FO） are studied and compared. The tuning parameters are obtained first by using root locus （RL） and Ziegler and Nichols methods, for comparison purposes. Next, particle swarm optimization （PSO） is employed to determine the optimal controllers＇ parameters using as fitness function the integral of the absolute value of tracking error （IAE）. From the experimental results it is concluded that PI/FOPI are the controllers presenting the lowest IAE indexes, whereas PID/FOPID controllers present the lowest energy consumption by the control signal.
基金Item Sponsored by National Natural Science Foundation of China(59995440)State Key Fundamental Research Project of China(G2000067208-4)
文摘An intelligent fuzzy-PID controller consisting of fuzzy logic controller and PID controller was developed to control the molten steel level of twin-roll strip caster.Additionally,a feedforward differential PID controller was used for stopper position control in order to avoid differential kick.It is proved by simulation that the proposed intelligent controller is able to obtain zero steady state error asymptotically and the control system is robust due to its fuggy behavior of the controller.
基金supported by the National Science and Technology Major Projects of Infectious Disease(2012ZX10004-404)
文摘Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility （ABSL-2）, commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented.
文摘Research on level 2 control system of 100 tons LF furnace was carried out. According to the principle of energy conservation and principle of mass conservation, the LF temperature prediction model and the composition prediction model were established. At the same time, the set value calculated by heating model and addition model could be sent to PLC. The results show that the technical indexes of LF furnace level 2 control system reach the demand and the system realizes automatic control.
基金supported by National Natural Science Foundation of China(Nos.61403149 and 61273069)Natural Science Foundation of Fujian Province(No.2015J01261)the Scientific Research Foundation of National Huaqiao University
文摘In this paper, a new analysis and design method for proportional-integrative-derivative （PID） tuning is proposed based on controller scaling analysis. Integral of time absolute error （ITAE） index is minimized for specified gain and phase margins （GPM） constraints, so that the transient performance and robustness are both satisfied. The requirements on gain and phase margins are ingeniously formulated by real part constraints （RPC） and imaginary part constraints （IPC）. This set of new constraints is simply related with three parameters and decoupling of the remaining four unknowns, including three controller parameters and the gain margin, in the nonlinear and coupled characteristic equation simultaneously. The formulas of the optimal GPM-PID are derived based on controller scaling analysis. Finally, this method is applied to liquid level control of coke fractionation tower, which demonstrate that the proposed method provides better disturbance rejection and robust tracking performance than some commonly used PID tuning methods.
文摘Tank level control is ubiquitous in industry. The focus of this paper is on accurate liquid level control in single tank systems which can be actuated continuously and modulation of the level setpoint is also required, for example in cascade control loops or supervisory Model Predictive Control (MPC) applications. To avoid common problems encountered when using fixed gain or adaptive/gain scheduled schemes, an accurate technique based around feedback linearization and Proportional Integral (PI) control is introduced. This simple controller can maintain linear performance over the full operating range of a uniform tank. As will be demonstrated, the implementation overhead compared to a regular PI controller is negligible, making it ideal for industrial implementation. Implementation details and parameter identification for adaptive implementation are discussed. Simulations coupled with experimental results using a large-scale laboratory level control system using commercial industrial control equipment validate the approach, and illustrate its effectiveness for both level tracking and disturbance rejection.
文摘The aim of the present study was to implant an efficient strategy for controlling the level of the effluent-oily foam interface in a DAF （dissolved air flotation） chamber of a pilot-scale prototype. DAF has been successfully used in the treatment of oily water, which is one of the main environmental problems in different industrial facilities. Along with important operational parameters, such as microbubble size and flow rate, the control strategy for the automation of a DAF chamber may be an important tool for increasing efficiency. Controlling the level was the strategy chosen to enhance the separation efficiency in a pilot-scale DAF prototype, with monitoring performed using a computational program in LabVIEW （laboratory virtual instrument engineering workbench）. The findings demonstrate that it is possible to maintain the level of the fluid at a reference value established by the operator using the software program through the application of classic proportional integral derivative controllers. Using this control tool, the efficiency of water-oil separation in the pilot flotation chamber prototype was increased to nearly 98%.
基金Supported by the National Natural Science Foundation of China(No.51509006)National Key Technology R&D Program(No.2015BAF07B08)Fundamental Research Funds for the Central Universities of Chang’an University(No.310825161008)
文摘In order to achieve an automatic leveling function for work platforms of aerial vehicles with mixed-booms( MAV) in full elevating domain,an auto-leveling mechanism for the platform is proposed based on a control method of booms-constraint,where mixed-boom structures and elevating characteristics are considered. Three models of constraint strategies include non-constraint model,elevating constraint model and lowering constraint model,which is designed to meet the leveling requirements in full working extent. Through the hydro-mechatronic unified modeling,a virtual prototype model is set up based on the auto-leveling mechanism,and leveling performances of the platform are studied during booms elevating to the maximum working height and extent. Simulation results show that the control method of booms-constraint can realize auto-leveling of the platform under two typical working conditions,meanwhile a leveling deviation appears at the constrained point,but the platform inclination is adjusted in the permissible range. The control method does not only restrict booms' freedom elevating to a certain extent,but also impacts the booms extending to the maximum working range. Experimental results verify that the auto-leveling mechanism based on booms-constraint control is valid and rational,which provides an effective technology approach for development of the platform leveling of MAV.
文摘We investigated optically controllable gray-level diffraction from a body-centered tetragonal photonic crystal that was based on an azo-dye-doped holographic polymer dispersed liquid crystal. The sample is fabricated by use of two-beam interference with multi-exposure. Bichromatic pumping beams at various intensities were used to pump the sample to change the concentration of the cis isomer and, in turn, modulate the effective index of the photonic crystals as well as their diffraction intensity. Three pumping processes were utilized to produce gray-level switching of diffractive light. This study demonstrates the optimum gray-level to be 15-level of up-step and down-step. The simulation of the diffraction intensity under bichromatic pumping sources was also studied.
文摘Due to its inherent safety feature, the modular high temperature gas-cooled reactor (MHTGR) has been seen as one of the best candidates in building next generation nuclear plants (NGNPs). Since the MHTGR dynamics has high nonlinearity, it is necessary to develop nonlinear power-level controller which is not only beneficial to the safe, stable, efficient and autonomous operation of the MHTGR but also easy to be implemented practically. In this paper, based on the concept of shiftedectropy and the physically-based control design approach, it is proved theoretically that the simple proportional-differential (PD) output-feedback power-level control can provide globally asymptotic closed-loop stability. Numerical simulation results verify the theoretical results and show the influence of the controller parameters to the dynamic response.
文摘Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. However, the problem of complexity of selecting vectors and capacitor voltage unbalance needs to be solved when the algorithm of direct torque control （DTC） is implemented on DCMLI. In this paper, a fuzzy DTC system of an induction machine fed by a three-level neutral-point-clamped （NPC） inverter is proposed. After introducing fuzzy logic, optimal selecting switching state is realized by applying various strategies which can distinguish the grade of the errors of stator flux linkage, torque, the neutral-point potential, and the position of stator flux linkage. Consequently, the neutral-point potential unbalance, the dr/dr of output voltage and the switching loss are restrained effectively, and desirable dynamic and steady-state performances of induction machines can be obtained for the DTC scheme. A design method of the fuzzy controller is introduced in detail, and the relevant simulation and experimental results have verified the feasibility of the proposed control algorithm.
基金supported by the Fund of China Agriculture Research System(CARS-37)the Genetically Modified Organisms Breeding Major Projects of China(2009ZX08011-031B)+1 种基金the Basic Research Fund of IAS,CAAS(2010jc-3-1)the National Natural Science Foundation of China(31001011)
文摘To our knowledge,no single study has systemically compared cryopreservation efficiencies of bovine blastocysts derived from in vitro fertilization （IVF）,intracytoplasmic sperm injection （ICSI） and somatic cell nuclear transfer （SCNT） by controlled freezing and vitrification.This experiment,therefore,was designed to compare the cryopreservation of these blastocysts with controlled freezing and OPS vitrification.Adenosine-5’-triphosphate （ATP） content and reactive oxygen species （ROS） level in blastocysts were also analyzed.Firstly,for each type of blastocyst （IVF,ICSI or SCNT）,significant differences were observed between the survival rates of the controlled freezing （（81.56±2.33）,（68.18±4.72） or （47.89±5.83）%） and OPS vitrification groups （（92.24±4.54）,（82.40±3.76） or （78.71±5.91）%;P〈0.05）.Secondly,for each type of blastocyst （IVF,ICSI or SCNT）,ATP content was significantly decreased after controlled freezing or vitrification,and the ATP content in the controlled freezing group （0.43±0.06）,（0.35±0.05） or （0.21±0.02） pmol） was significantly lower than that found in the OPS vitrification group （0.62±0.04）,（0.46±0.03） or （0.30±0.01） pmol;P〈0.05）.Thirdly,ROS level in fresh IVF （（47.33±3.56） c.p.s （counted photons per second）,ICSI （（36.51±2.58） c.p.s） or SCNT blastocysts （（26.44±1.49） c.p.s） was significantly lower than that found in the OPS vitrification group （（72.14±4.31）,（58.89±3.89） or （40.11±5.73） c.p.s;P〈0.05）,but higher than that of the controlled freezing group （34.41±3.32）,（23.13±1.26） or （15.46±2.45） c.p.s;P〈0.05）.The present study indicated that vitrification is more efficient in the cryopreservation of bovine blastocysts derived from IVF,ICSI or SCNT than controlled freezing.Furthermore,both vitrification and controlled freezing significantly altered the ATP content and ROS level in those blastocysts.
文摘In this paper, a voltage oriented control strategy for three-level PWM rectifier based on Sliding Mode Control (SMC) is introduced in order to obtain fast and accurate response of dc-bus voltage. To verify the validity of the analysis and the feasibility of the proposed control method a set of simulation tests have been conducted using Matlab/Simulink. The simulation results show that compared to the conventional PI controller, the SMC can reduce drastically the three-level rectifier’s voltage fluctuation and improve the dynamic response of dc-bus significantly.
