For further research on the control model of muhifunctional hot metal ladles between the ironmaking and steelmaking interface, the hot metal ladies of K steel plant were taken as the object to analyze the operation pr...For further research on the control model of muhifunctional hot metal ladles between the ironmaking and steelmaking interface, the hot metal ladies of K steel plant were taken as the object to analyze the operation process. The factors of blast furnace supply and basic oxygen furnace demand were proposed. According to the principle of supply and demand balance, the control model of hot metal was researched under the following factor conditions： equal to, greater than, and less than 1, respectively. The distribution model of the blast furnace, sleelmaking works, and online buffering was proposed. When the supply and demand factor is equal to ） , the turnover number of hot metal ladles equals 16 and the turnover cycle of hot metal ladles equals 512 min. When the factor is greater than 1, the total number of hot metal ladles is equal to the normal turnover number plus the turnover number of the cast iron machine. When the factor is less than 1, the total number of hot metal ladles is equal tO the normal turnover number plus the accumulating number. Satisfactory effects were obtained by applying the control model in produc tion. The numbers of turnover ladles and accumulating ladles were reduced.展开更多
To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed c...To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed control model provides continuity of acceleration, which avoids the intense vibration in high speed NC machining. Based on the discrete characteristic of the data sampling interpolation, the acc/dec control discrete mathematical model is also set up and the discrete expression of the theoretical deceleration length is obtained furthermore. Aiming at the question of hardly predetermining the deceleration point in acc/dec control before interpolation, the adaptive acc/dec control algorithm is deduced from the expressions of the theoretical deceleration length. The experimental result proves that the acc/dec control model has the characteristic of easy implementation, stable movement and low impact. The model has been applied in multi-axes high speed micro fabrication machining successfully.展开更多
To better understand the twin-roll casting process,based on the analysis of the solidification phenomenon,the geometry shape of the molten metal pool,the continuity of metal and the balance of energy and momentum,five...To better understand the twin-roll casting process,based on the analysis of the solidification phenomenon,the geometry shape of the molten metal pool,the continuity of metal and the balance of energy and momentum,five critical partial equations were established separately including the equations of pool level,solidification process,roll separating force,roll gap and casting speed.Meanwhile,to obtain a uniform sheet thickness and keep a constant roll separating force,a decoupling control model was built on the perturbation method to eliminate the interference of process parameters.The simulation results show that the control model is valuable to quickly and accurately determine the control parameters.Moreover,Mg alloy sheets with high quality were cast by applying this model.展开更多
[Objective] The aim was to study the control model of rural non-point source pollution.[Method] Taking Ninghe County(a typical agricultural county in Tianjin) as an example,the current development of local economy and...[Objective] The aim was to study the control model of rural non-point source pollution.[Method] Taking Ninghe County(a typical agricultural county in Tianjin) as an example,the current development of local economy and society and characteristics of rural non-point source pollution were studied firstly,then the control model of rural non-point source pollution suitable for Ninghe County was constructed,and its environmental and economic benefits were analyzed finally.[Result] According to the sources of non-point source pollution,the control model of rural non-point source pollution in Ninghe County was divided into three modules from the aspects of planting industry,livestock raising industry and rural living.The main content of non-point source pollution control module of planting industry was composed of rational utilization of chemicals,water-saving irrigation,diversified utilization of straw etc.Non-point source pollution control module of livestock raising industry focused on the site selection of farm or raising zones,choice of raising mode,comprehensive utilization of livestock waste etc.In the non-point source pollution control module of rural living,villages were divided into two types(small town and ecological village) based on various geographical positions.In a word,these three modules were interrelated and targeted for non-point source pollution control in villages under different development situations.[Conclusion] The study could provide references for the rural non-point source pollution control in Hai River basin and other regions of Northern China.展开更多
There are significant effects of process parameters on internal qualities of bloom, and these process parameters are as follows. position and reduction amount, reduction distribution, reduction rate, and so on. Develo...There are significant effects of process parameters on internal qualities of bloom, and these process parameters are as follows. position and reduction amount, reduction distribution, reduction rate, and so on. Developing a control model is the key to apply soft reduction technology successfully. As the research object, 360 mm ×450 mm bloom caster in PISCO （Panzhihua Iron and Steel Co. ） has been studied, and the research method for control model of dynamic soft reduction has been proposed. On the basis of solidification and heat transfer model, the position of soft reduction and reduction distribution of each frame are determined according to the bloom temperature distribution and solid fraction in bloom center calculated. Production practice shows that the ratio of center porosity which is less than or equal to 1.0, increased to 97.27%, ratio of central segregation which is less than or equal to 0.5, increased to 80.91%, and ratio of central carbon segregation index which is more than or equal to 1.10, decreased to 4% with the applying model of dynamic soft reduction.展开更多
To resolve the problem of quantitative analysis in hybrid cloud,a quantitative analysis method,which is based on the security entropy,is proposed.Firstly,according to the information theory,the security entropy is put...To resolve the problem of quantitative analysis in hybrid cloud,a quantitative analysis method,which is based on the security entropy,is proposed.Firstly,according to the information theory,the security entropy is put forward to calculate the uncertainty of the system' s determinations on the irregular access behaviors.Secondly,based on the security entropy,security theorems of hybrid cloud are defined.Finally,typical access control models are analyzed by the method,the method's practicability is validated,and security and applicability of these models are compared.Simulation results prove that the proposed method is suitable for the security quantitative analysis of the access control model and evaluation to access control capability in hybrid cloud.展开更多
The historical formation and development of the abandoned channel of the Yellow River is reviewed and its causes of formation and present condition of prevention and control are analyzed in this paper. Based on this a...The historical formation and development of the abandoned channel of the Yellow River is reviewed and its causes of formation and present condition of prevention and control are analyzed in this paper. Based on this analysis, some ideas about control, critical problems and countermeasures in the next period are proposed with two typical control models as examples. We suggest that in preventing and controlling the wind-drift sandy lands in the region, the emphasis should be to develop, with a greatly expanded effort, a recycling economy. This should realize a combination of two ideas, i.e. integrate combating desertification with a structural adjustment of agricultural and an increase in the income of farmers.展开更多
The paper proposes a conference control model between a web server and a telecom application server,referred to as the Conference Directed Graph(CDG) ,and describes an asynchronous communication mechanism between them...The paper proposes a conference control model between a web server and a telecom application server,referred to as the Conference Directed Graph(CDG) ,and describes an asynchronous communication mechanism between them. The Corba Interface Definition Language(IDL) interfaces are defined,and a message sequence chart is illustrated. This web conference control model provides conference users with a new approach to manage and control a conference and the participants. The performance of the system prototype is analyzed and verified in the 863 project named "The Multi-media and Mobile Services Enabled Soft-switch System".展开更多
A caisson foundation is applied to the north anchorage of Taizhou Yangtze River Highway Bridge of which the initial caisson sinking requires dewatering. Since the caisson foundation is quite close to nearby buildings,...A caisson foundation is applied to the north anchorage of Taizhou Yangtze River Highway Bridge of which the initial caisson sinking requires dewatering. Since the caisson foundation is quite close to nearby buildings, a system control model is established with source (sink) distribution and intensity being the object function, minimum requirements of settlement and deformation of surroundings caused by dewatering and dynamic water levels during different working procedures being constraints, and the design parameter of pumping wells being the variable,so as to lower the jeopardizing of surrounding buildings, which provides a new method for active control over settlement during dewatering. Such a method of dewatering based on system control model should be of significance for similar projects involving dewatering.展开更多
Cryogenic machining is a new technology which makes use of the special mechanicalprcperties of niaterials in a cryogenic or a 'super cold' state for machining. The control of acryogenic machining system(CMS)i...Cryogenic machining is a new technology which makes use of the special mechanicalprcperties of niaterials in a cryogenic or a 'super cold' state for machining. The control of acryogenic machining system(CMS)is one of the key problems which need to be solved for practi-cal cryogenic machining A temperature field control principle is presented which calculates theheat source temperature in the light of the tool temperature field information, and a control mod-el of three-dimensional dynamic temperature field for CMS is established, and the boundary con-ditions and the heat source of temperature field in orthogonal cutting are discussed. Based on theinvestigation of the control feature and technique. a prototype system for controlling CMS is crea-ted.展开更多
This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary,and established four kinds of technological process control models of reverse logistics i...This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary,and established four kinds of technological process control models of reverse logistics in manufacturing system according to different processing methods. These models embed each other that form a cubic control system of reverse logistics.展开更多
On the basis of analyzing the principles, equipment and control needs of directional solidification continuous casting (DSCC) process, the building and fulfilling methods of control model of DSCC procedure by neural n...On the basis of analyzing the principles, equipment and control needs of directional solidification continuous casting (DSCC) process, the building and fulfilling methods of control model of DSCC procedure by neural network control (NNC) method were proposed and discussed. Combining the experimental researches, firstly the computer is used to simulate the effects of those solidification parameters on destination control variable (S/L interface) and the reactions among those parameters during DSCC procedure; secondly many training samples can be obtained. Moreover, after these samples are input into neural network software (NNs) and trained, the control model can be built.展开更多
New precisely cooperative attacks, such as the coordi- nated cross plane session termination （CXPST） attack, need thou- sands upon thousands machines to attack diverse selected links simultaneously with the given ra...New precisely cooperative attacks, such as the coordi- nated cross plane session termination （CXPST） attack, need thou- sands upon thousands machines to attack diverse selected links simultaneously with the given rate. However, almost all command and control（C＆C） mechanisms only provide publishing one com- mand to the whole once, so-called one-to-all C＆C model, and are not productive to support CXPST-alike attacks. In this paper, we present one-to-any C＆C model on coordination among the unco- operative controlled nodes. As an instance of one-to-any C＆C model, directional command publishing （DCP） mechanism lever- aging on Kademlia is provided with a range-mapping key creating algorithm for commands to compute the publishing range and a statistically stochastic node querying scheme to obtain the com- mands immediately. With theoretical analysis and simulation, it is indicated that one-to-any C＆C model fits for precisely coordi- nated operation on uncooperative controlled nodes with least complexity, better accuracy and efficiency. Furthermore, DCP mechanism can support one-to-all command publishing at the same time. As an example of future C＆C model, studying on one-to-any C＆C model may help to promote the development of more efficient countermeasures.展开更多
A feedback control model of lattice hydrodynamic model is proposed by taking the information of the historic optimal velocity into account for the traffic system. The modern control theory is applied for the linear st...A feedback control model of lattice hydrodynamic model is proposed by taking the information of the historic optimal velocity into account for the traffic system. The modern control theory is applied for the linear stability condition with feedback control signal. The result shows that the stability of traffic flow is closely related to the information of the historic optimal velocity. Furthermore, numerical simulations conform that the new feedback control did increase the stability of traffic flow efficiently, which is in accord with theoretical analysis.展开更多
The Fuzzy Logic Control (FLC) was used in the nonlinear, multivariable, and time varying system to control coal flotation. The control algorithm includes two different methods of adding reagents. First, the reagent is...The Fuzzy Logic Control (FLC) was used in the nonlinear, multivariable, and time varying system to control coal flotation. The control algorithm includes two different methods of adding reagents. First, the reagent is coarsely adjusted according to the solid content in the feed and the reagent consumption per ton of coal; And then it is finely adjusted under the control of the Fuzzy Logic Algorithm according to the ash content of the clean coal. The industrial experiments and the site application show that this control model can keep a stable ash level of clean coal and cut down obviously the reagent consumption.展开更多
The final diagnosis of some diseases depends on many factors and information. Considering all these factors and reviewing all of them is a difficult process, thus providing a mathematical model that can simultaneously...The final diagnosis of some diseases depends on many factors and information. Considering all these factors and reviewing all of them is a difficult process, thus providing a mathematical model that can simultaneously consider all these factors is a great help for physicians to diagnose and treat these diseases. In this paper, we propose a new fuzzy control model for kidney transplantation patients. For the inference and conclusion of this model, we use Mamdani approach. Also we employ a new method to smooth the well-known non-smooth piecewise membership functions, i.e. trapezoidal and half trapezoidal membership functions.展开更多
Towards the crossing and coupling permissions in tasks existed widely in many fields and considering the design of role view must rely on the activities of the tasks process,based on Role Based Accessing Control (RBAC...Towards the crossing and coupling permissions in tasks existed widely in many fields and considering the design of role view must rely on the activities of the tasks process,based on Role Based Accessing Control (RBAC) model,this paper put forward a Role Tree-Based Access Control (RTBAC) model. In addition,the model definition and its constraint formal description is also discussed in this paper. RTBAC model is able to realize the dynamic organizing,self-determination and convenience of the design of role view,and guarantee the least role permission when task separating in the mean time.展开更多
Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the s...Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the strong reliance on mathematical models seriously restrains its practical application.Therefore,improving the robustness of MPC has attained significant attentions in the last two decades,followed by which,model-free predictive control(MFPC)comes into existence.This article aims to reveal the current state of MFPC strategies for motor drives and give the categorization from the perspective of implementation.Based on this review,the principles of the reported MFPC strategies are introduced in detail,as well as the challenges encountered in technology realization.In addition,some of typical and important concepts are experimentally validated via case studies to evaluate the performance and highlight their features.Finally,the future trends of MFPC are discussed based on the current state and reported developments.展开更多
Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive cont...Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.展开更多
基金Item Sponsored by China Postdoctoral Science Foundation(2015M572647XB)Science Research Program of Yunnan Province Education Department of China(2014Y069)
文摘For further research on the control model of muhifunctional hot metal ladles between the ironmaking and steelmaking interface, the hot metal ladies of K steel plant were taken as the object to analyze the operation process. The factors of blast furnace supply and basic oxygen furnace demand were proposed. According to the principle of supply and demand balance, the control model of hot metal was researched under the following factor conditions： equal to, greater than, and less than 1, respectively. The distribution model of the blast furnace, sleelmaking works, and online buffering was proposed. When the supply and demand factor is equal to ） , the turnover number of hot metal ladles equals 16 and the turnover cycle of hot metal ladles equals 512 min. When the factor is greater than 1, the total number of hot metal ladles is equal to the normal turnover number plus the turnover number of the cast iron machine. When the factor is less than 1, the total number of hot metal ladles is equal tO the normal turnover number plus the accumulating number. Satisfactory effects were obtained by applying the control model in produc tion. The numbers of turnover ladles and accumulating ladles were reduced.
基金the Hi-Tech Research and Development Pro-gram (863) of China (No. 2006AA04Z233)the National NaturalScience Foundation of China (No. 50575205)the Natural ScienceFoundation of Zhejiang Province (Nos. Y104243 and Y105686),China
文摘To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed control model provides continuity of acceleration, which avoids the intense vibration in high speed NC machining. Based on the discrete characteristic of the data sampling interpolation, the acc/dec control discrete mathematical model is also set up and the discrete expression of the theoretical deceleration length is obtained furthermore. Aiming at the question of hardly predetermining the deceleration point in acc/dec control before interpolation, the adaptive acc/dec control algorithm is deduced from the expressions of the theoretical deceleration length. The experimental result proves that the acc/dec control model has the characteristic of easy implementation, stable movement and low impact. The model has been applied in multi-axes high speed micro fabrication machining successfully.
基金financial support from the Fundamental Research Funds of Anshan Municipal Government
文摘To better understand the twin-roll casting process,based on the analysis of the solidification phenomenon,the geometry shape of the molten metal pool,the continuity of metal and the balance of energy and momentum,five critical partial equations were established separately including the equations of pool level,solidification process,roll separating force,roll gap and casting speed.Meanwhile,to obtain a uniform sheet thickness and keep a constant roll separating force,a decoupling control model was built on the perturbation method to eliminate the interference of process parameters.The simulation results show that the control model is valuable to quickly and accurately determine the control parameters.Moreover,Mg alloy sheets with high quality were cast by applying this model.
基金Supported by Hai River Basin Integrated Water Resources Management Project of Global Environment Facility(SEPA-ZWN-3,C/II/S/09/090)
文摘[Objective] The aim was to study the control model of rural non-point source pollution.[Method] Taking Ninghe County(a typical agricultural county in Tianjin) as an example,the current development of local economy and society and characteristics of rural non-point source pollution were studied firstly,then the control model of rural non-point source pollution suitable for Ninghe County was constructed,and its environmental and economic benefits were analyzed finally.[Result] According to the sources of non-point source pollution,the control model of rural non-point source pollution in Ninghe County was divided into three modules from the aspects of planting industry,livestock raising industry and rural living.The main content of non-point source pollution control module of planting industry was composed of rational utilization of chemicals,water-saving irrigation,diversified utilization of straw etc.Non-point source pollution control module of livestock raising industry focused on the site selection of farm or raising zones,choice of raising mode,comprehensive utilization of livestock waste etc.In the non-point source pollution control module of rural living,villages were divided into two types(small town and ecological village) based on various geographical positions.In a word,these three modules were interrelated and targeted for non-point source pollution control in villages under different development situations.[Conclusion] The study could provide references for the rural non-point source pollution control in Hai River basin and other regions of Northern China.
文摘There are significant effects of process parameters on internal qualities of bloom, and these process parameters are as follows. position and reduction amount, reduction distribution, reduction rate, and so on. Developing a control model is the key to apply soft reduction technology successfully. As the research object, 360 mm ×450 mm bloom caster in PISCO （Panzhihua Iron and Steel Co. ） has been studied, and the research method for control model of dynamic soft reduction has been proposed. On the basis of solidification and heat transfer model, the position of soft reduction and reduction distribution of each frame are determined according to the bloom temperature distribution and solid fraction in bloom center calculated. Production practice shows that the ratio of center porosity which is less than or equal to 1.0, increased to 97.27%, ratio of central segregation which is less than or equal to 0.5, increased to 80.91%, and ratio of central carbon segregation index which is more than or equal to 1.10, decreased to 4% with the applying model of dynamic soft reduction.
基金Supported by the National Natural Science Foundation of China(No.60872041,61072066)Fundamental Research Funds for the Central Universities(JYI0000903001,JYI0000901034)
文摘To resolve the problem of quantitative analysis in hybrid cloud,a quantitative analysis method,which is based on the security entropy,is proposed.Firstly,according to the information theory,the security entropy is put forward to calculate the uncertainty of the system' s determinations on the irregular access behaviors.Secondly,based on the security entropy,security theorems of hybrid cloud are defined.Finally,typical access control models are analyzed by the method,the method's practicability is validated,and security and applicability of these models are compared.Simulation results prove that the proposed method is suitable for the security quantitative analysis of the access control model and evaluation to access control capability in hybrid cloud.
文摘The historical formation and development of the abandoned channel of the Yellow River is reviewed and its causes of formation and present condition of prevention and control are analyzed in this paper. Based on this analysis, some ideas about control, critical problems and countermeasures in the next period are proposed with two typical control models as examples. We suggest that in preventing and controlling the wind-drift sandy lands in the region, the emphasis should be to develop, with a greatly expanded effort, a recycling economy. This should realize a combination of two ideas, i.e. integrate combating desertification with a structural adjustment of agricultural and an increase in the income of farmers.
基金the National High-Tech Research and De-velopment Plan of China (No.2001AA121021)the Na-tional Research Foundation for the Doctoral Program of Higher Education of China (No.20020013004)+2 种基金the Na-tional Grand Fundamental Research 973 Program of China (No.2003CB314806)the National Natural Science Foundation for Distinguished Young Scholars of China (No.60125101)the Cheung Kong Scholar’s Program and the Promotion Project for Creative Teams of the Ministry of Education (Networking Theory and Tech-nology in Telecommunication) (No.IRT0410).
文摘The paper proposes a conference control model between a web server and a telecom application server,referred to as the Conference Directed Graph(CDG) ,and describes an asynchronous communication mechanism between them. The Corba Interface Definition Language(IDL) interfaces are defined,and a message sequence chart is illustrated. This web conference control model provides conference users with a new approach to manage and control a conference and the participants. The performance of the system prototype is analyzed and verified in the 863 project named "The Multi-media and Mobile Services Enabled Soft-switch System".
基金National Science and Technology Support Program of China ( No. 2009BAG15B02) Key Pro-grams for Science and Technology Development of Chinese Transportation industry ( No. 2008-353-332-160) +2 种基金Jiangsu Province College Graduate Research and Innovation Program ( No. CX08B_123Z) 2009 Natural ScienceFoundation of Hohai University ( No. 2009424011)the Fundamental Research Funds for the Central Universi-ties ( No. 2009B11814)
文摘A caisson foundation is applied to the north anchorage of Taizhou Yangtze River Highway Bridge of which the initial caisson sinking requires dewatering. Since the caisson foundation is quite close to nearby buildings, a system control model is established with source (sink) distribution and intensity being the object function, minimum requirements of settlement and deformation of surroundings caused by dewatering and dynamic water levels during different working procedures being constraints, and the design parameter of pumping wells being the variable,so as to lower the jeopardizing of surrounding buildings, which provides a new method for active control over settlement during dewatering. Such a method of dewatering based on system control model should be of significance for similar projects involving dewatering.
文摘Cryogenic machining is a new technology which makes use of the special mechanicalprcperties of niaterials in a cryogenic or a 'super cold' state for machining. The control of acryogenic machining system(CMS)is one of the key problems which need to be solved for practi-cal cryogenic machining A temperature field control principle is presented which calculates theheat source temperature in the light of the tool temperature field information, and a control mod-el of three-dimensional dynamic temperature field for CMS is established, and the boundary con-ditions and the heat source of temperature field in orthogonal cutting are discussed. Based on theinvestigation of the control feature and technique. a prototype system for controlling CMS is crea-ted.
文摘This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary,and established four kinds of technological process control models of reverse logistics in manufacturing system according to different processing methods. These models embed each other that form a cubic control system of reverse logistics.
文摘On the basis of analyzing the principles, equipment and control needs of directional solidification continuous casting (DSCC) process, the building and fulfilling methods of control model of DSCC procedure by neural network control (NNC) method were proposed and discussed. Combining the experimental researches, firstly the computer is used to simulate the effects of those solidification parameters on destination control variable (S/L interface) and the reactions among those parameters during DSCC procedure; secondly many training samples can be obtained. Moreover, after these samples are input into neural network software (NNs) and trained, the control model can be built.
基金Supported by the National Natural Science Foundation of China(61402526,61502528)
文摘New precisely cooperative attacks, such as the coordi- nated cross plane session termination （CXPST） attack, need thou- sands upon thousands machines to attack diverse selected links simultaneously with the given rate. However, almost all command and control（C＆C） mechanisms only provide publishing one com- mand to the whole once, so-called one-to-all C＆C model, and are not productive to support CXPST-alike attacks. In this paper, we present one-to-any C＆C model on coordination among the unco- operative controlled nodes. As an instance of one-to-any C＆C model, directional command publishing （DCP） mechanism lever- aging on Kademlia is provided with a range-mapping key creating algorithm for commands to compute the publishing range and a statistically stochastic node querying scheme to obtain the com- mands immediately. With theoretical analysis and simulation, it is indicated that one-to-any C＆C model fits for precisely coordi- nated operation on uncooperative controlled nodes with least complexity, better accuracy and efficiency. Furthermore, DCP mechanism can support one-to-all command publishing at the same time. As an example of future C＆C model, studying on one-to-any C＆C model may help to promote the development of more efficient countermeasures.
基金Supported by the National Natural Science Foundation of China under Grant No.61673168
文摘A feedback control model of lattice hydrodynamic model is proposed by taking the information of the historic optimal velocity into account for the traffic system. The modern control theory is applied for the linear stability condition with feedback control signal. The result shows that the stability of traffic flow is closely related to the information of the historic optimal velocity. Furthermore, numerical simulations conform that the new feedback control did increase the stability of traffic flow efficiently, which is in accord with theoretical analysis.
基金Supported by National Key Science and Technology Development Project of the ninth"five-year-plan"(95 2 15 0 10 5 0 1)
文摘The Fuzzy Logic Control (FLC) was used in the nonlinear, multivariable, and time varying system to control coal flotation. The control algorithm includes two different methods of adding reagents. First, the reagent is coarsely adjusted according to the solid content in the feed and the reagent consumption per ton of coal; And then it is finely adjusted under the control of the Fuzzy Logic Algorithm according to the ash content of the clean coal. The industrial experiments and the site application show that this control model can keep a stable ash level of clean coal and cut down obviously the reagent consumption.
文摘The final diagnosis of some diseases depends on many factors and information. Considering all these factors and reviewing all of them is a difficult process, thus providing a mathematical model that can simultaneously consider all these factors is a great help for physicians to diagnose and treat these diseases. In this paper, we propose a new fuzzy control model for kidney transplantation patients. For the inference and conclusion of this model, we use Mamdani approach. Also we employ a new method to smooth the well-known non-smooth piecewise membership functions, i.e. trapezoidal and half trapezoidal membership functions.
基金Knowledge Innovation Project and Intelligent Infor mation Service and Support Project of the Shanghai Education Commission, China
文摘Towards the crossing and coupling permissions in tasks existed widely in many fields and considering the design of role view must rely on the activities of the tasks process,based on Role Based Accessing Control (RBAC) model,this paper put forward a Role Tree-Based Access Control (RTBAC) model. In addition,the model definition and its constraint formal description is also discussed in this paper. RTBAC model is able to realize the dynamic organizing,self-determination and convenience of the design of role view,and guarantee the least role permission when task separating in the mean time.
基金supported in part by the National Natural Science Foundation of China under Grant 52077002。
文摘Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the strong reliance on mathematical models seriously restrains its practical application.Therefore,improving the robustness of MPC has attained significant attentions in the last two decades,followed by which,model-free predictive control(MFPC)comes into existence.This article aims to reveal the current state of MFPC strategies for motor drives and give the categorization from the perspective of implementation.Based on this review,the principles of the reported MFPC strategies are introduced in detail,as well as the challenges encountered in technology realization.In addition,some of typical and important concepts are experimentally validated via case studies to evaluate the performance and highlight their features.Finally,the future trends of MFPC are discussed based on the current state and reported developments.
文摘Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.
