In the last five years,there has been a V-shaped recovery in the number of papers on congestion control algorithms on the Internet.In this paper,congestion problems on the Internet are discussed,such as congestion col...In the last five years,there has been a V-shaped recovery in the number of papers on congestion control algorithms on the Internet.In this paper,congestion problems on the Internet are discussed,such as congestion collapse and bufferbloat from the perspective of the necessity of congestion control algorithms.The typical congestion control algorithms are introduced,and the research areas and methods of congestion control algorithms are described.Recent research trends and future prospects of congestion control algorithms are also presented.展开更多
To reduce the vibration in the suspension, semi active suspension system was employed. And its CARMA model was built. Two adaptive control schemes, the minimum variance self tuning control algorithm and the pole con...To reduce the vibration in the suspension, semi active suspension system was employed. And its CARMA model was built. Two adaptive control schemes, the minimum variance self tuning control algorithm and the pole configuration self tuning control algorithm, were proposed. The former can make the variance of the output minimum while the latter can make dynamic behavior satisfying. The stability of the two schemes was analyzed. Simulations of them show that the acceleration in the vertical direction has been reduced greatly. The purpose of reducing vibration is realized. The two schemes can reduce the vibration in the suspension and have some practicability.展开更多
A mobile marine seismometer(MMS)is a vertical underwater vehicle that detects ocean seismic waves.One of the critical operational requirements for an MMS is that it remains suspended at a desired depth.This article ai...A mobile marine seismometer(MMS)is a vertical underwater vehicle that detects ocean seismic waves.One of the critical operational requirements for an MMS is that it remains suspended at a desired depth.This article aimed to propose a fixed-depth suspension control for the MMS with a limited onboard energy supply.The research team established a kinematic model to analyze fluctuations in the vertical motion of the MMS and the delayed response of the system.We ascertained a direct one-to-one correlation between the displacement volume of the mobile ocean seismic instrument and the depth at which it reaches a state of neutral buoyancy(commonly referred to as the hover depth).A fixed-depth control algorithm was introduced,allowing a gradual approach to the necessary displacement volume to reach the desired suspension depth.The study optimized the boundary conditions to reduce unnecessary adjustments and mitigate the time delay caused by the instrument’s inertia,thereby significantly minimizing energy consumption.This method does not require calculating the hydrodynamic parameters or transfer functions of the MMS,thereby considerably reducing the implementation complexity.In the three-month sea trial in the South China Sea,the seismic instrument was set to hover at 800 m,with a permissible fluctuation of±100 m,operating on a seven-day cycle.The experimental results show that the seismic instrument has an average hover error of 34.6 m,with a vertical drift depth of 29.6 m per cycle,and the buoyancy adjustment system made six adjustments,indicating that our proposed control method performs satisfactorily.In addition,this method provides new insights for the fixed-depth control of other ocean observation devices that rely on buoyancy adjustment.展开更多
On the basis of the theory of adaptive active noise control(AANC) in a duct, this article discusses the algorithms of the adaptive control, compares the algorithm characteristics using LMS, RLS and LSL algorithms in t...On the basis of the theory of adaptive active noise control(AANC) in a duct, this article discusses the algorithms of the adaptive control, compares the algorithm characteristics using LMS, RLS and LSL algorithms in the adaptive filter in the AANC system, derives the recursive formulas of LMS algorithm. and obtains the LMS algorithm in computer simulation using FIR and IIR filters in AANC system. By means of simulation, we compare the attenuation levels with various input signals in AANC system and discuss the effects of step factor, order of filters and sound delay on the algorithm's convergence rate and attenuation level.We also discuss the attenuation levels with sound feedback using are and IIR filters in AANC system.展开更多
The combination of structural health monitoring and vibration control is of great importance to provide components of smart structures.While synthetic algorithms have been proposed,adaptive control that is compatible ...The combination of structural health monitoring and vibration control is of great importance to provide components of smart structures.While synthetic algorithms have been proposed,adaptive control that is compatible with changing conditions still needs to be used,and time-varying systems are required to be simultaneously estimated with the application of adaptive control.In this research,the identification of structural time-varying dynamic characteristics and optimized simple adaptive control are integrated.First,reduced variations of physical parameters are estimated online using the multiple forgetting factor recursive least squares(MFRLS)method.Then,the energy from the structural vibration is simultaneously specified to optimize the control force with the identified parameters to be operational.Optimization is also performed based on the probability density function of the energy under the seismic excitation at any time.Finally,the optimal control force is obtained by the simple adaptive control(SAC)algorithm and energy coefficient.A numerical example and benchmark structure are employed to investigate the efficiency of the proposed approach.The simulation results revealed the effectiveness of the integrated online identification and optimal adaptive control in systems.展开更多
The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stat...The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.展开更多
In this paper, the method of semi-active control with variable damper is presented to deal with the relatively poor transversal seismic condition of bridge. Based on the LQR control algorithm the control effectiveness...In this paper, the method of semi-active control with variable damper is presented to deal with the relatively poor transversal seismic condition of bridge. Based on the LQR control algorithm the control effectiveness for transverse vibration of pier-beam structure of bridge are discussed. Taking the structure as a multiple-degree of freedom system, the calculating model of structure-variable damper system is set up and the differential equation is derived, combined with practical example the control system is simulated and studied by various semi-active control algorithms and passive strategy with MATLAB. The results show that the semi-active control with variable damper can decrease the transverse vibration effectively and the control effect is obvious.展开更多
Ocean wave propagation is slow, visible and measurable, so a wave theory can be used to approximately predict the imminnent wave force on an offshore structure based on measured, real-time wave elevation near the stru...Ocean wave propagation is slow, visible and measurable, so a wave theory can be used to approximately predict the imminnent wave force on an offshore structure based on measured, real-time wave elevation near the structure. This predictability suggests the development of a more efficient algorithm, than those that have been developed for structures under wind and seismic loads, for the active vibration control of offshore structures. The present study delveops a mutiple-step predictive optimal control (MPOC) algorithm that accounts for multiple step external loading in the determination of optimal control forces. The control efficiency of the newly developed MPOC algorithm has been Investigated under both regular (single-frequency) and irregular (multiple-frequency) wave loads, and compared with that of two other well-known optimal control algorithms: classical linear optimal control(CLOC) and instantaneous optimal control(IOC).展开更多
A novel control algorithm with fixed pulse thrust, based on true proportional navigation（TPN）, is proposed for exoatmospheric intercept.According to the TPN guidance law and pulse thrust characteristics, the princip...A novel control algorithm with fixed pulse thrust, based on true proportional navigation（TPN）, is proposed for exoatmospheric intercept.According to the TPN guidance law and pulse thrust characteristics, the principle of control command is presented, the control stability and precision are analyzed.With the help of the TPN guidance law, the algorithm can automatically modulate the turn-on time and duration of the thrust, which could effectively limit the impact of measure noise of the line-of-sight（LOS） angle and rate on the interception miss-distance.At last, the number-theoretic method（NTM） is introduced to acquire the relation between control algorithm and miss-distance, even as it simulates the intercept process with initial state noise.And the reliability of the algorithm is demonstrated with the simulation result.展开更多
There exists an increasing need for precision measurement&pointing control and extreme motion stability for current and future space systems,e.g.,Ultra-Performance Spacecraft(UPS).Some notable technologies of real...There exists an increasing need for precision measurement&pointing control and extreme motion stability for current and future space systems,e.g.,Ultra-Performance Spacecraft(UPS).Some notable technologies of realizing Ultra-Pointing(UP)ability have been developed particularly for Ultra-accuracy Ultra-stability Ultra-agility(3 U)spacecraft over recent decades.Usually,Multilevel Compound Pointing Control Techniques(MCPCTs)are deployed in aerospace engineering,especially in astronomical observation satellites and Earth observation satellites.Modern controllers and/or algorithms,which are a key factor of MCPCTs for 3 U spacecraft,especially the jitter phenomena that commonly exist in a UPS Pointing Control System(PCS),have also been effectively used in some UP spacecraft for a number of years.Micro-vibration suppression approaches,however,are often proposed to deal with low-level mechanical vibration or disturbance in the microgravity environment that is common for UPS.This latter approach potentially is one of the most practical UP techniques for 3 U tasks.Some emerging advanced Disturbance-Free Payload(DFP)satellites that exploit the benefits of non-contact actuators have also been reported in the literature.This represents an interesting and highly promising approach for solving some challenging problems in the area.This paper serves as a state-of-the-art review of UP technologies and/or methods which have been developed,mainly over the last decade,specifically for or potentially could be used for 3 U spacecraft pointing control.The problems discussed in this paper are of reference significance to UPS and millisecond optical sensors,which are involved in Gaofeng Project,deep space exploration,manned space flight,and gravitational wave detection.展开更多
To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed c...To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed control model provides continuity of acceleration, which avoids the intense vibration in high speed NC machining. Based on the discrete characteristic of the data sampling interpolation, the acc/dec control discrete mathematical model is also set up and the discrete expression of the theoretical deceleration length is obtained furthermore. Aiming at the question of hardly predetermining the deceleration point in acc/dec control before interpolation, the adaptive acc/dec control algorithm is deduced from the expressions of the theoretical deceleration length. The experimental result proves that the acc/dec control model has the characteristic of easy implementation, stable movement and low impact. The model has been applied in multi-axes high speed micro fabrication machining successfully.展开更多
Coasting in gear is a common driving mode for the conventional vehicle equipped with the internal combustion engine（ICE）, and the assistant braking function of ICE is utilized to decelerate the vehicle in this mode....Coasting in gear is a common driving mode for the conventional vehicle equipped with the internal combustion engine（ICE）, and the assistant braking function of ICE is utilized to decelerate the vehicle in this mode. However, the electric vehicle（EV） does not have this feature in the coasting mode due to the relatively small inertia of the driving motor, so it will cause the driver cannot obtain the similar driving feeling to that of the conventional vehicle, and even a traffic accident may occur if the driver cannot immediately adapt to the changes. In this paper, the coasting control for EV is researched based on the driving feeling. A conventional vehicle equipped with continuously variable transmission（CVT） is taken as the reference vehicle, and the combined simulation model of EV is established based on AVL CRUISE and MATLAB/Simulink. The torque characteristic of the CVT output shaft is measured in coasting mode, and the data are smoothed and fitted to a polynomial curve. For the EV in coasting mode, if the state of charge（SOC） of the battery is below 95%, the polynomial curve is used as the control target for the torque characteristic of the driving motor, otherwise, the required torque is replaced by hydraulic braking torque to keep the same deceleration. The co-simulation of Matlab/Simulink/Stateflow and AVL CRUISE, as well as the hardware-in-loop experiment combined with d SPACE are carried out to verify the effectiveness and the real-time performance of the control algorithm. The results show that the EV with coasting braking control system has similar driving feeling to that of the reference vehicle, meanwhile, the battery SOC can be increased by 0.036% and 0.021% in the initial speed of 100 km/h and 50 km/h, respectively. The proposed control algorithm for EV is beneficial to improve the driving feeling in coasting mode, and it also makes the EV has the assistant braking function.展开更多
Shearer and hydraulic support are matching equipments. To increase the operating speed of the shearer, the following speed of hydraulic support must be increased. This means increasing the volume of flow from emulsion...Shearer and hydraulic support are matching equipments. To increase the operating speed of the shearer, the following speed of hydraulic support must be increased. This means increasing the volume of flow from emulsion power station. Analyzing the operating characteristics of hydraulic supports, the number of simultaneously operating supports is obtained by means of pressure parameter and time history at a certain time, which is a theory base for development of control system to multi-pump emulsion power station.展开更多
Control of pH neutralization processes is challenging in the chemical process industry because of their inherent strong nonlinearity. In this paper, the model algorithmic control (MAC) strategy is extended to nonlinea...Control of pH neutralization processes is challenging in the chemical process industry because of their inherent strong nonlinearity. In this paper, the model algorithmic control (MAC) strategy is extended to nonlinear processes using Hammerstein model that consists of a static nonlinear polynomial function followed in series by a linear impulse response dynamic element. A new nonlinear Hammerstein MAC algorithm (named NLH-MAC) is presented in detail. The simulation control results of a pH neutralization process show that NLH-MAC gives better control performance than linear MAC and the commonly used industrial nonlinear propotional plus integral plus derivative (PID) controller. Further simulation experiment demonstrates that NLH-MAC not only gives good control response, but also possesses good stability and robustness even with large modeling errors.展开更多
The conventional linear quadratic regulator(LQR) control algorithm is one of the most popular active control algorithms.One important issue for LQR control algorithm is the reduction of structure's degrees of free...The conventional linear quadratic regulator(LQR) control algorithm is one of the most popular active control algorithms.One important issue for LQR control algorithm is the reduction of structure's degrees of freedom(DOF). In this work, an LQR control algorithm with superelement model is intended to solve this issue leading to the fact that LQR control algorithm can be used in large finite element(FE) model for structure. In proposed model, the Craig-Bampton(C-B) method, which is one of the component mode syntheses(CMS), is used to establish superelement modeling to reduce structure's DOF and applied to LQR control algorithm to calculate Kalman gain matrix and obtain control forces. And then, the control forces are applied to original structure to simulate the responses of structure by vibration control. And some examples are given. The results show the computational efficiency of proposed model using synthesized models is higher than that of the classical method of LQR control when the DOF of structure is large. And the accuracy of proposed model is well. Meanwhile, the results show that the proposed control has more effects of vibration absorption on the ground structures than underground structures.展开更多
With the increasing demand for high-precision optical components,bonnet polishing technology is increasingly being used in the polishing process of optical components owing to its high removal efficiency and high surf...With the increasing demand for high-precision optical components,bonnet polishing technology is increasingly being used in the polishing process of optical components owing to its high removal efficiency and high surface accuracy.However,it is expensive and difficult to implement dedicated bonnet polishing machine tools,and their processing range is limited.This research combines bonnet polishing technology with industrial robot-assisted processing technology to propose a robotic bonnet polishing control model for large-diameter axisymmetric aspherical optical components.Using the transformation relations of the spatial coordinate system,the transformation relations of the workpiece coordinate system,local coordinate system of the polishing point,and tool coordinate system of the bonnet sphere center are established to obtain the bonnet precession polishing motion model.The polishing trajectory of large-diameter axisymmetric aspherical components and the variation in the linkage angle difference were simulated by adding an efficiency-optimal control strategy to the motion model.The robot motion was simulated in Robostudio to verify the correctness of the precession motion model and control algorithm.Lastly,the robotic bonnet polishing system was successfully applied to the polishing process of the optical components.展开更多
The performance of the model algorithm control method is partially based on the accuracy of the system＇s model. It is difficult to obtain a good model of a nonlinear system, especially when the nonlinearity is high. ...The performance of the model algorithm control method is partially based on the accuracy of the system＇s model. It is difficult to obtain a good model of a nonlinear system, especially when the nonlinearity is high. Neural networks have the ability to ＂learn＂the characteristics of a system through nonlinear mapping to represent nonlinear functions as well as their inverse functions. This paper presents a model algorithm control method using neural networks for nonlinear time delay systems. Two neural networks are used in the control scheme. One neural network is trained as the model of the nonlinear time delay system, and the other one produces the control inputs. The neural networks are combined with the model algorithm control method to control the nonlinear time delay systems. Three examples are used to illustrate the proposed control method. The simulation results show that the proposed control method has a good control performance for nonlinear time delay systems.展开更多
To develop cruise control system of an automobile with the metal pushing V-belt type CVT,the dynamic model of automobile travelling longitudinally is established, and the fuzzy controller of control system is designed...To develop cruise control system of an automobile with the metal pushing V-belt type CVT,the dynamic model of automobile travelling longitudinally is established, and the fuzzy controller of control system is designed. Considering uncertainty system parameter and exterior resistance disturbances, the stability of controller is investigated by simulating. The results of its simulation show that the fuzzy controller designed has practicability.展开更多
Deep oil exploration coring technology cannot accurately maintain the in-situ pressure and temperature of samples, which leads to a distortion of deep oil and gas resource reserve evaluations based on conventional cor...Deep oil exploration coring technology cannot accurately maintain the in-situ pressure and temperature of samples, which leads to a distortion of deep oil and gas resource reserve evaluations based on conventional cores and cannot guide the development of deep oil and gas resources on Earth. The fundamental reason is the lack of temperature and pressure control in in-situ coring environments. In this paper, a pressure control method of a coring device is studied. The theory and method of deep intelligent temperature-pressure coupling control are innovatively proposed, and a multifield coupling dynamic sealing model is established. The optimal cardinality three term PID (Proportional-Integral-Differential) intelligent control algorithm of pressure system is developed. The temperature-pressure characteristic of the gas-liquid two-phase cavity is analyzed, and the pressure intelligent control is carried out based on three term PID control algorithms. An in-situ condition-preserved coring (ICP-Coring) device is developed, and an intelligent control system for the temperature and pressure of the coring device is designed and verified by experiments. The results show that the temperature-pressure coupling control system can effectively realize stable sealing under temperature-pressure fields of 140 MPa and 150 °C. The temperature-pressure coupling control method can accurately realize a constant pressure inside the coring device. The maximum working pressure is 140 MPa, and the effective pressure compensation range is 20 MPa. The numerical simulation experiment of pressure system control algorithm is carried out, and the optimal cardinality and three term coefficients are obtained. The pressure steady-state error is less than 0.01%. The method of temperature-pressure coupling control has guiding significance for coring device research, and is also the basis for temperature-pressure decoupling control in ICP-Coring.展开更多
In this paper,a new system of semi active structural control with active variable stiffness and damping (AVSD) is suggested.This new system amplifies the structural displacement to dissipate more energy,and in turn,ef...In this paper,a new system of semi active structural control with active variable stiffness and damping (AVSD) is suggested.This new system amplifies the structural displacement to dissipate more energy,and in turn,effectively reduces the structural response in the case of relatively small story drifts,which occur during earthquakes.A predictive instantaneous optimal control algorithm is established for a SDOF structure equipped with an AVSD system Comparative shaking table tests of a 1/4 scale single story structural model with a full scale control device have been conducted.From the experimental and analytical results,it is shown that when compared to structures without control or with the active variable stiffness control alone, the suggested system exhibits higher efficiency in controlling the structural response,requires less energy input,operates with higher reliability,and can be manufactured at a lower cost and used in a wider range of engineering applications.展开更多
基金supported by JSPS Grants-in-Aid for Scientific Research JP20K11786 and JP21KK0202.
文摘In the last five years,there has been a V-shaped recovery in the number of papers on congestion control algorithms on the Internet.In this paper,congestion problems on the Internet are discussed,such as congestion collapse and bufferbloat from the perspective of the necessity of congestion control algorithms.The typical congestion control algorithms are introduced,and the research areas and methods of congestion control algorithms are described.Recent research trends and future prospects of congestion control algorithms are also presented.
文摘To reduce the vibration in the suspension, semi active suspension system was employed. And its CARMA model was built. Two adaptive control schemes, the minimum variance self tuning control algorithm and the pole configuration self tuning control algorithm, were proposed. The former can make the variance of the output minimum while the latter can make dynamic behavior satisfying. The stability of the two schemes was analyzed. Simulations of them show that the acceleration in the vertical direction has been reduced greatly. The purpose of reducing vibration is realized. The two schemes can reduce the vibration in the suspension and have some practicability.
基金The National Key Research and Development Program of China under contract Nos.2021YFC3101401 and 2022YFC3003802the Deep Blue Fund under contract No.SL2103+2 种基金the Zhejiang Provincial Key Research and Development Program under contract No.2021C03186the Zhejiang Provincial Natural Science Foundation of China under contract No.LDQ24D060001the Open Fund Project of Key Laboratory of Ocean Observation Technology,MNR under contract No.2024klootA11.
文摘A mobile marine seismometer(MMS)is a vertical underwater vehicle that detects ocean seismic waves.One of the critical operational requirements for an MMS is that it remains suspended at a desired depth.This article aimed to propose a fixed-depth suspension control for the MMS with a limited onboard energy supply.The research team established a kinematic model to analyze fluctuations in the vertical motion of the MMS and the delayed response of the system.We ascertained a direct one-to-one correlation between the displacement volume of the mobile ocean seismic instrument and the depth at which it reaches a state of neutral buoyancy(commonly referred to as the hover depth).A fixed-depth control algorithm was introduced,allowing a gradual approach to the necessary displacement volume to reach the desired suspension depth.The study optimized the boundary conditions to reduce unnecessary adjustments and mitigate the time delay caused by the instrument’s inertia,thereby significantly minimizing energy consumption.This method does not require calculating the hydrodynamic parameters or transfer functions of the MMS,thereby considerably reducing the implementation complexity.In the three-month sea trial in the South China Sea,the seismic instrument was set to hover at 800 m,with a permissible fluctuation of±100 m,operating on a seven-day cycle.The experimental results show that the seismic instrument has an average hover error of 34.6 m,with a vertical drift depth of 29.6 m per cycle,and the buoyancy adjustment system made six adjustments,indicating that our proposed control method performs satisfactorily.In addition,this method provides new insights for the fixed-depth control of other ocean observation devices that rely on buoyancy adjustment.
文摘On the basis of the theory of adaptive active noise control(AANC) in a duct, this article discusses the algorithms of the adaptive control, compares the algorithm characteristics using LMS, RLS and LSL algorithms in the adaptive filter in the AANC system, derives the recursive formulas of LMS algorithm. and obtains the LMS algorithm in computer simulation using FIR and IIR filters in AANC system. By means of simulation, we compare the attenuation levels with various input signals in AANC system and discuss the effects of step factor, order of filters and sound delay on the algorithm's convergence rate and attenuation level.We also discuss the attenuation levels with sound feedback using are and IIR filters in AANC system.
文摘The combination of structural health monitoring and vibration control is of great importance to provide components of smart structures.While synthetic algorithms have been proposed,adaptive control that is compatible with changing conditions still needs to be used,and time-varying systems are required to be simultaneously estimated with the application of adaptive control.In this research,the identification of structural time-varying dynamic characteristics and optimized simple adaptive control are integrated.First,reduced variations of physical parameters are estimated online using the multiple forgetting factor recursive least squares(MFRLS)method.Then,the energy from the structural vibration is simultaneously specified to optimize the control force with the identified parameters to be operational.Optimization is also performed based on the probability density function of the energy under the seismic excitation at any time.Finally,the optimal control force is obtained by the simple adaptive control(SAC)algorithm and energy coefficient.A numerical example and benchmark structure are employed to investigate the efficiency of the proposed approach.The simulation results revealed the effectiveness of the integrated online identification and optimal adaptive control in systems.
文摘The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.
文摘In this paper, the method of semi-active control with variable damper is presented to deal with the relatively poor transversal seismic condition of bridge. Based on the LQR control algorithm the control effectiveness for transverse vibration of pier-beam structure of bridge are discussed. Taking the structure as a multiple-degree of freedom system, the calculating model of structure-variable damper system is set up and the differential equation is derived, combined with practical example the control system is simulated and studied by various semi-active control algorithms and passive strategy with MATLAB. The results show that the semi-active control with variable damper can decrease the transverse vibration effectively and the control effect is obvious.
基金National Science Foundation of U.S.A.under grant CMS-9503533
文摘Ocean wave propagation is slow, visible and measurable, so a wave theory can be used to approximately predict the imminnent wave force on an offshore structure based on measured, real-time wave elevation near the structure. This predictability suggests the development of a more efficient algorithm, than those that have been developed for structures under wind and seismic loads, for the active vibration control of offshore structures. The present study delveops a mutiple-step predictive optimal control (MPOC) algorithm that accounts for multiple step external loading in the determination of optimal control forces. The control efficiency of the newly developed MPOC algorithm has been Investigated under both regular (single-frequency) and irregular (multiple-frequency) wave loads, and compared with that of two other well-known optimal control algorithms: classical linear optimal control(CLOC) and instantaneous optimal control(IOC).
文摘A novel control algorithm with fixed pulse thrust, based on true proportional navigation（TPN）, is proposed for exoatmospheric intercept.According to the TPN guidance law and pulse thrust characteristics, the principle of control command is presented, the control stability and precision are analyzed.With the help of the TPN guidance law, the algorithm can automatically modulate the turn-on time and duration of the thrust, which could effectively limit the impact of measure noise of the line-of-sight（LOS） angle and rate on the interception miss-distance.At last, the number-theoretic method（NTM） is introduced to acquire the relation between control algorithm and miss-distance, even as it simulates the intercept process with initial state noise.And the reliability of the algorithm is demonstrated with the simulation result.
基金support from the National Natural Science Foundation of China(No.51905034)。
文摘There exists an increasing need for precision measurement&pointing control and extreme motion stability for current and future space systems,e.g.,Ultra-Performance Spacecraft(UPS).Some notable technologies of realizing Ultra-Pointing(UP)ability have been developed particularly for Ultra-accuracy Ultra-stability Ultra-agility(3 U)spacecraft over recent decades.Usually,Multilevel Compound Pointing Control Techniques(MCPCTs)are deployed in aerospace engineering,especially in astronomical observation satellites and Earth observation satellites.Modern controllers and/or algorithms,which are a key factor of MCPCTs for 3 U spacecraft,especially the jitter phenomena that commonly exist in a UPS Pointing Control System(PCS),have also been effectively used in some UP spacecraft for a number of years.Micro-vibration suppression approaches,however,are often proposed to deal with low-level mechanical vibration or disturbance in the microgravity environment that is common for UPS.This latter approach potentially is one of the most practical UP techniques for 3 U tasks.Some emerging advanced Disturbance-Free Payload(DFP)satellites that exploit the benefits of non-contact actuators have also been reported in the literature.This represents an interesting and highly promising approach for solving some challenging problems in the area.This paper serves as a state-of-the-art review of UP technologies and/or methods which have been developed,mainly over the last decade,specifically for or potentially could be used for 3 U spacecraft pointing control.The problems discussed in this paper are of reference significance to UPS and millisecond optical sensors,which are involved in Gaofeng Project,deep space exploration,manned space flight,and gravitational wave detection.
基金the Hi-Tech Research and Development Pro-gram (863) of China (No. 2006AA04Z233)the National NaturalScience Foundation of China (No. 50575205)the Natural ScienceFoundation of Zhejiang Province (Nos. Y104243 and Y105686),China
文摘To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed control model provides continuity of acceleration, which avoids the intense vibration in high speed NC machining. Based on the discrete characteristic of the data sampling interpolation, the acc/dec control discrete mathematical model is also set up and the discrete expression of the theoretical deceleration length is obtained furthermore. Aiming at the question of hardly predetermining the deceleration point in acc/dec control before interpolation, the adaptive acc/dec control algorithm is deduced from the expressions of the theoretical deceleration length. The experimental result proves that the acc/dec control model has the characteristic of easy implementation, stable movement and low impact. The model has been applied in multi-axes high speed micro fabrication machining successfully.
基金Supported by Guangdong Provincial Science and Technology Planning Project of China(Grant Nos.2013B010402006,2013B010405007,2013B090600024)
文摘Coasting in gear is a common driving mode for the conventional vehicle equipped with the internal combustion engine（ICE）, and the assistant braking function of ICE is utilized to decelerate the vehicle in this mode. However, the electric vehicle（EV） does not have this feature in the coasting mode due to the relatively small inertia of the driving motor, so it will cause the driver cannot obtain the similar driving feeling to that of the conventional vehicle, and even a traffic accident may occur if the driver cannot immediately adapt to the changes. In this paper, the coasting control for EV is researched based on the driving feeling. A conventional vehicle equipped with continuously variable transmission（CVT） is taken as the reference vehicle, and the combined simulation model of EV is established based on AVL CRUISE and MATLAB/Simulink. The torque characteristic of the CVT output shaft is measured in coasting mode, and the data are smoothed and fitted to a polynomial curve. For the EV in coasting mode, if the state of charge（SOC） of the battery is below 95%, the polynomial curve is used as the control target for the torque characteristic of the driving motor, otherwise, the required torque is replaced by hydraulic braking torque to keep the same deceleration. The co-simulation of Matlab/Simulink/Stateflow and AVL CRUISE, as well as the hardware-in-loop experiment combined with d SPACE are carried out to verify the effectiveness and the real-time performance of the control algorithm. The results show that the EV with coasting braking control system has similar driving feeling to that of the reference vehicle, meanwhile, the battery SOC can be increased by 0.036% and 0.021% in the initial speed of 100 km/h and 50 km/h, respectively. The proposed control algorithm for EV is beneficial to improve the driving feeling in coasting mode, and it also makes the EV has the assistant braking function.
文摘Shearer and hydraulic support are matching equipments. To increase the operating speed of the shearer, the following speed of hydraulic support must be increased. This means increasing the volume of flow from emulsion power station. Analyzing the operating characteristics of hydraulic supports, the number of simultaneously operating supports is obtained by means of pressure parameter and time history at a certain time, which is a theory base for development of control system to multi-pump emulsion power station.
文摘Control of pH neutralization processes is challenging in the chemical process industry because of their inherent strong nonlinearity. In this paper, the model algorithmic control (MAC) strategy is extended to nonlinear processes using Hammerstein model that consists of a static nonlinear polynomial function followed in series by a linear impulse response dynamic element. A new nonlinear Hammerstein MAC algorithm (named NLH-MAC) is presented in detail. The simulation control results of a pH neutralization process show that NLH-MAC gives better control performance than linear MAC and the commonly used industrial nonlinear propotional plus integral plus derivative (PID) controller. Further simulation experiment demonstrates that NLH-MAC not only gives good control response, but also possesses good stability and robustness even with large modeling errors.
基金Project(LZ2015022)supported by Educational Commission of Liaoning Province of ChinaProjects(51138001,51178081)supported by the National Natural Science Foundation of China+1 种基金Project(2013CB035905)supported by the Basic Research Program of ChinaProjects(DUT15LK34,DUT14QY10)supported by Fundamental Research Funds for the Central Universities,China
文摘The conventional linear quadratic regulator(LQR) control algorithm is one of the most popular active control algorithms.One important issue for LQR control algorithm is the reduction of structure's degrees of freedom(DOF). In this work, an LQR control algorithm with superelement model is intended to solve this issue leading to the fact that LQR control algorithm can be used in large finite element(FE) model for structure. In proposed model, the Craig-Bampton(C-B) method, which is one of the component mode syntheses(CMS), is used to establish superelement modeling to reduce structure's DOF and applied to LQR control algorithm to calculate Kalman gain matrix and obtain control forces. And then, the control forces are applied to original structure to simulate the responses of structure by vibration control. And some examples are given. The results show the computational efficiency of proposed model using synthesized models is higher than that of the classical method of LQR control when the DOF of structure is large. And the accuracy of proposed model is well. Meanwhile, the results show that the proposed control has more effects of vibration absorption on the ground structures than underground structures.
基金Science and Technology Projects of Shenzhen(Grant No.JCYJ20180306172924636).
文摘With the increasing demand for high-precision optical components,bonnet polishing technology is increasingly being used in the polishing process of optical components owing to its high removal efficiency and high surface accuracy.However,it is expensive and difficult to implement dedicated bonnet polishing machine tools,and their processing range is limited.This research combines bonnet polishing technology with industrial robot-assisted processing technology to propose a robotic bonnet polishing control model for large-diameter axisymmetric aspherical optical components.Using the transformation relations of the spatial coordinate system,the transformation relations of the workpiece coordinate system,local coordinate system of the polishing point,and tool coordinate system of the bonnet sphere center are established to obtain the bonnet precession polishing motion model.The polishing trajectory of large-diameter axisymmetric aspherical components and the variation in the linkage angle difference were simulated by adding an efficiency-optimal control strategy to the motion model.The robot motion was simulated in Robostudio to verify the correctness of the precession motion model and control algorithm.Lastly,the robotic bonnet polishing system was successfully applied to the polishing process of the optical components.
基金supported by the Brain Korea 21 PLUS Project,National Research Foundation of Korea(NRF-2013R1A2A2A01068127NRF-2013R1A1A2A10009458)Jiangsu Province University Natural Science Research Project(13KJB510003)
文摘The performance of the model algorithm control method is partially based on the accuracy of the system＇s model. It is difficult to obtain a good model of a nonlinear system, especially when the nonlinearity is high. Neural networks have the ability to ＂learn＂the characteristics of a system through nonlinear mapping to represent nonlinear functions as well as their inverse functions. This paper presents a model algorithm control method using neural networks for nonlinear time delay systems. Two neural networks are used in the control scheme. One neural network is trained as the model of the nonlinear time delay system, and the other one produces the control inputs. The neural networks are combined with the model algorithm control method to control the nonlinear time delay systems. Three examples are used to illustrate the proposed control method. The simulation results show that the proposed control method has a good control performance for nonlinear time delay systems.
基金This project is supported by National Natural Science Foundation of China (No.50005026)
文摘To develop cruise control system of an automobile with the metal pushing V-belt type CVT,the dynamic model of automobile travelling longitudinally is established, and the fuzzy controller of control system is designed. Considering uncertainty system parameter and exterior resistance disturbances, the stability of controller is investigated by simulating. The results of its simulation show that the fuzzy controller designed has practicability.
基金supported by the National Natural Science Foundation of China(grant numbers 51827901,51805340)funded by the Program for Guangdong Introducing Innovative and Enterpreneurial Teams(No.2019ZT08G315)Shenzhen Basic Research Program(General Program)(No.JCYJ20190808153416970).
文摘Deep oil exploration coring technology cannot accurately maintain the in-situ pressure and temperature of samples, which leads to a distortion of deep oil and gas resource reserve evaluations based on conventional cores and cannot guide the development of deep oil and gas resources on Earth. The fundamental reason is the lack of temperature and pressure control in in-situ coring environments. In this paper, a pressure control method of a coring device is studied. The theory and method of deep intelligent temperature-pressure coupling control are innovatively proposed, and a multifield coupling dynamic sealing model is established. The optimal cardinality three term PID (Proportional-Integral-Differential) intelligent control algorithm of pressure system is developed. The temperature-pressure characteristic of the gas-liquid two-phase cavity is analyzed, and the pressure intelligent control is carried out based on three term PID control algorithms. An in-situ condition-preserved coring (ICP-Coring) device is developed, and an intelligent control system for the temperature and pressure of the coring device is designed and verified by experiments. The results show that the temperature-pressure coupling control system can effectively realize stable sealing under temperature-pressure fields of 140 MPa and 150 °C. The temperature-pressure coupling control method can accurately realize a constant pressure inside the coring device. The maximum working pressure is 140 MPa, and the effective pressure compensation range is 20 MPa. The numerical simulation experiment of pressure system control algorithm is carried out, and the optimal cardinality and three term coefficients are obtained. The pressure steady-state error is less than 0.01%. The method of temperature-pressure coupling control has guiding significance for coring device research, and is also the basis for temperature-pressure decoupling control in ICP-Coring.
文摘In this paper,a new system of semi active structural control with active variable stiffness and damping (AVSD) is suggested.This new system amplifies the structural displacement to dissipate more energy,and in turn,effectively reduces the structural response in the case of relatively small story drifts,which occur during earthquakes.A predictive instantaneous optimal control algorithm is established for a SDOF structure equipped with an AVSD system Comparative shaking table tests of a 1/4 scale single story structural model with a full scale control device have been conducted.From the experimental and analytical results,it is shown that when compared to structures without control or with the active variable stiffness control alone, the suggested system exhibits higher efficiency in controlling the structural response,requires less energy input,operates with higher reliability,and can be manufactured at a lower cost and used in a wider range of engineering applications.
