Longitudinal cracks are common defects of continuous casting slabs and may lead to serious quality accidents. Image capturing and recognition of hot slabs is an effective way for on-line detection of cracks, and recog...Longitudinal cracks are common defects of continuous casting slabs and may lead to serious quality accidents. Image capturing and recognition of hot slabs is an effective way for on-line detection of cracks, and recognition of cracks is essential because the surface of hot slabs is very complicated. In order to detect the surface longitudinal cracks of the slabs, a new feature extraction method based on Curvelet transform and kernel locality preserving projections （KLPP） is proposed. First, sample images are decomposed into three levels by Curvelet transform. Second, Fourier transform is applied to all sub-band images and the Fourier amplitude spectrum of each sub-band is computed to get features with translational invariance. Third, five kinds of statistical features of the Fourier amplitude spectrum are computed and combined in different forms. Then, KLPP is employed for dimensionality reduction of the obtained 62 types of high-dimensional combined features. Finally, a support vector machine （SVM） is used for sample set classification. Experiments with samples from a real production line of continuous casting slabs show that the algorithm is effective to detect longitudinal cracks, and the classification rate is 91.89%.展开更多
In the current study, the transformation in the composition of non-metallic inclusions from the molten steel to the solidified steel was studied and the composition distribution of inclusions on the cross section of a...In the current study, the transformation in the composition of non-metallic inclusions from the molten steel to the solidified steel was studied and the composition distribution of inclusions on the cross section of a linepine continuous casting slab was predicted. During cooling and solidification of the continuous casting strand, Al_(2)O_(3)-CaO inclusions reacted with the bulk steel and transformed to CaS-Al_(2)O_(3)-MgO-(CaO) ones in the continuous casting slab. The composition of inclusions on the cross section of the slab varied with locations due to the varied cooling rate. A model was established to predict the distribution of the composition of inclusions on the cross section of the continuous casting slab, coupling solidification and heat transfer of the continuous casting slab, the kinetic mass transfer of the dissolved elements in the solid steel, and thermodynamic calculation of inclusion transformation at different temperatures. The composition transformation of inclusions mainly occurred at the temperature between the liquidus and solidus of the linepipe steel. Inclusions were mainly CaS-Al_(2)O_(3)-MgO-(CaO) in slab center and were MgO-Al_(2)O_(3)-CaO-CaS within the subsurface of the slab. In the slab, the transformation fraction of inclusions was less than 10 % at corners while it reached 70 % at 50 mm below the surface of the slab.展开更多
By means of Gleeble-1500 testing machine, the simulation of continuous casting process forAH32 steel was carried out and hot ductility and strength were determined. The cracking sensitivity was studied under the diffe...By means of Gleeble-1500 testing machine, the simulation of continuous casting process forAH32 steel was carried out and hot ductility and strength were determined. The cracking sensitivity was studied under the different temperatures and strain rates. The Precipitations of AIN at different temperatures and the fractures of high-temperature tensile samples were observed by using TEM （transmission electron microscope） and SEM （scanning electron microscope）. The factors affecting the brittle temperature zone were discussed.展开更多
Two-dimension unsteady heat transfer model was applied to obtain the surfacetemperature and the shell thickness of continuous casting slabs during the process ofsolidification. On the basis of which, the mathematical ...Two-dimension unsteady heat transfer model was applied to obtain the surfacetemperature and the shell thickness of continuous casting slabs during the process ofsolidification. On the basis of which, the mathematical model of strain at the interface of solidand liquid steel was set up. Through which, the strain in the solidifying shell under normal andabnormal operation conditions was gained. The results indicate that the strain is small under thenormal operation conditions and the internal crack never happens. However, when the variation of theroll gap is above 2 mm, the strain caused by which is greater than that caused by bulging.Furthermore, the total strain exceeds the critical one and the internal crack is the result. So itis of great importance to maintain the fine state of continuous casting machine to avoid theappearance of internal crack.展开更多
By calculating the electron structures of the phases that phosphor, sulfur and alloying elements dissolving inγ-Fe, the reason why alloying elements can bring centerline segregation in continuous casting slab (CCS) w...By calculating the electron structures of the phases that phosphor, sulfur and alloying elements dissolving inγ-Fe, the reason why alloying elements can bring centerline segregation in continuous casting slab (CCS) with nA, the number of electrons on the strongest covalent bonds, and the structure formation factor S were investigated, and an electron structural criterion to control and to eliminate the centerline segregation was advanced. Basing on this, the electron structures of a part of rare earth phosphides and sulfides are calculated, the physical mechanism that rare earth elements can control the segregation of phosphor and sulfur is analyzed, and the criterion is well verified.展开更多
By means of the numerical simulation method,the mathematical model of inclusions movement in the mold is established under the condition of austenitic and fen-itic stainless steel slab production. According to the sim...By means of the numerical simulation method,the mathematical model of inclusions movement in the mold is established under the condition of austenitic and fen-itic stainless steel slab production. According to the simulation results, the main zones for inclusion particles accumulation were found and many factors that affected floating-up probability of inclusion particles were identified. These factors include the inclusion particle size, the casting speed and the slab width, etc. It is believed that the inclusion particle size is the key one among these factors.展开更多
The application of liquid core reduction(LCR)technology in thin slab continuous casting can refine the internal microstruc-tures of slabs and improve their production efficiency.To avoid crack risks caused by large de...The application of liquid core reduction(LCR)technology in thin slab continuous casting can refine the internal microstruc-tures of slabs and improve their production efficiency.To avoid crack risks caused by large deformation during the LCR process and to minimize the thickness of the slab in bending segments,the maximum theoretical reduction amount and the corresponding reduction scheme for the LCR process must be determined.With SPA-H weathering steel as a specific research steel grade,the distributions of tem-perature and deformation fields of a slab with the LCR process were analyzed using a three-dimensional thermal-mechanical finite ele-ment model.High-temperature tensile tests were designed to determine the critical strain of corner crack propagation and intermediate crack initiation with various strain rates and temperatures,and a prediction model of the critical strain for two typical cracks,combining the effects of strain rate and temperature,was proposed by incorporating the Zener-Hollomon parameter.The crack risks with different LCR schemes were calculated using the crack risk prediction model,and the maximum theoretical reduction amount for the SPA-H slab with a transverse section of 145 mm×1600 mm was 41.8 mm,with corresponding reduction amounts for Segment 0 to Segment 4 of 15.8,7.3,6.5,6.4,and 5.8 mm,respectively.展开更多
A mathematical model coupling flow,solidification,strain-stress,and interface failure was developed.Following identification of crack source type through thermal tensile experiment and validation by strain-stress comp...A mathematical model coupling flow,solidification,strain-stress,and interface failure was developed.Following identification of crack source type through thermal tensile experiment and validation by strain-stress comparison,the model was used to investigate slab cracking tendency near precipitated phases,considering various locations,sizes and shapes of them.The results show that the jet from submerged entry nozzle creates a“double roll”flow pattern during continuous casting,resulting in more uniform temperature distributions at slab corner and wide surface center compared with narrow surface center.Consequently,precipitated phases,particularly those located on the narrow surface,readily induce stress concentration and thus increase cracking tendency.A smaller precipitated phase size can reduce the stress concentration zone,while a more spherical shape can distribute surrounding stress along its surface and lower the internal stress within it,thereby decreasing the risk of slab cracking during continuous casting.The optimal precipitated phase exhibits a spherical or ellipsoidal shape with a major axis of less than 5µm,minimizing its potential to initiate cracks.展开更多
The microstructural characteristics of austenite in Ti microalloyed steel during continuous casting significantly influence thethermoplasticity,thereby affecting the quality of the slab.In this work,a prediction model...The microstructural characteristics of austenite in Ti microalloyed steel during continuous casting significantly influence thethermoplasticity,thereby affecting the quality of the slab.In this work,a prediction model for two-stage austenite growth under varyingcooling rates was established by incorporating the effect of second-phase pinning and high-temperature ferrite-austenite phase transform-ation and growth theory.The results indicate that with 0.02wt%Ti,the high-temperature ferrite growth exhibits typical parabolic growthcharacteristics.When the Ti content increases to 0.04wt%,the high-temperature ferrite grain boundary migration rate significantly slowsduring the initial solidification stage.The predicted austenite grain sizes for 0.02wt%Ti microalloyed steel at the center,quarter,and sur-face of the slab are 5592,3529,and 1524μm,respectively.For 0.04wt%Ti microalloyed steel,the austenite grain sizes are 4074,2942,and 1179μm at the same positions.The average error is within 5%.As the Ti content increases from 0.02wt% to 0.04wt%,the austenitegrain refinement at the center is most significant,with an average grain size reduction of 27.14%.展开更多
Controlling molten steel flow in the mold and stabilizing the meniscus are critical challenges during the continuous casting,directly impacting the surface quality and internal quality of the final steel slab product....Controlling molten steel flow in the mold and stabilizing the meniscus are critical challenges during the continuous casting,directly impacting the surface quality and internal quality of the final steel slab product.The effects of electromagnetic swirling flow in nozzle(EMSFN)technology on molten steel flow in the mold during slab continuous casting under various casting speeds were investigated.A real-time adjustable EMSFN was developed,and a three-dimensional unsteady Reynolds-averaged Navier–Stokes turbulence mathematical model was established to simulate the flow field within the mold.The results demonstrate that the EMSFN effectively stabilizes the outflow from nozzle,reduces the impact depth and surface velocity of the molten steel,mitigates meniscus fluctuations,and promotes stable flow within the mold.However,a certain matching relationship exists between the casting speed and the current intensity.For the experimental medium-thick slab specifications,the optimal current intensities were found to be 100,130,and 200 A at casting speeds of 1.0,1.5,and 2.0 m/min,respectively.EMSFN can optimize the mold flow field under different casting speeds,providing theoretical support for improving the quality of continuously cast slab products.展开更多
Deformation behavior of slab at the straightening stage during continuous casting was simulated by the explicit dynamic finite element method,and the stress distribution along the width direction of the slab and its c...Deformation behavior of slab at the straightening stage during continuous casting was simulated by the explicit dynamic finite element method,and the stress distribution along the width direction of the slab and its change regularity at slab center during continuous casting were obtained.The influence of distribution and change of stress on the propagation of longitudinal cracks on slab surface was discussed.The results show that the tensional stress appears on slab surface at the inner arc side and the compressive stress appears on slab surface at the outer arc side at stages 6-8 in straightening zone during continuous casting.Longitudinal cracks generally appear on slab top surface and do not appear on slab bottom surface,which are also observed in industry.展开更多
The correlation between the longitudinal crack occurrence and integrated heat transfer of the mold with data mining methods was investigated.Firstly,three kinds of support vector machine models based on principal comp...The correlation between the longitudinal crack occurrence and integrated heat transfer of the mold with data mining methods was investigated.Firstly,three kinds of support vector machine models based on principal component analysis with different input features were established to explore the effect of integrated heat transfer on the accuracy of the prediction model for the longitudinal crack.The results show that the accuracy was improved while features including mean and standard deviation of integrated heat transfer were added.Then,the difference in integrated heat transfer between defect and normal samples under the same process parameters was quantitatively compared.Compared with normal samples,the temperature difference of cooling water for defect samples decreased by 0.65%,and the temperature difference fluctuation increased by 31.1%.Finally,the literature data were used to provide support for the quantitative correlation according to defect formation mechanism.A new criterion for the prediction of longitudinal crack and a discovering method for correlation between product quality and process parameters in the manufacturing industry have been provided.展开更多
The morphology of manganese sulfide formed during thin slab continuous casting process in low-carbon steel produced by compact strip production （CSP） technique was investigated. Using transmission electron microscop...The morphology of manganese sulfide formed during thin slab continuous casting process in low-carbon steel produced by compact strip production （CSP） technique was investigated. Using transmission electron microscopy analysis, it was seen that a majority of manganese sulfides precipitated at austenite grain boundaries, the morphologies of which were spherical or close to the spherical shape and the size of MnS precipitates ranged from 30 nm to 100 nm. A mathematical model of the manganese sulfide precipitation in this process was developed based on classical nucleation theory. Under the given conditions, the starting and finishing precipitation temperatures of MnS in the continuous casting thin slab of the studied low-carbon steel are 1 189 ℃ and 1 171 ℃, respectively, and the average diameter of MnS precipitates is about 48 nm within this precipitation temperature range. The influences of chemical components and thermo-mechanical processing conditions on the precipitation behavior of MnS in the same process were also discussed.展开更多
The operating conditions during the continuous casting process have a great effect on the microstructure of slab solidification, including primary and secondary dendritic arm spacing. On the basis of the analysis of a...The operating conditions during the continuous casting process have a great effect on the microstructure of slab solidification, including primary and secondary dendritic arm spacing. On the basis of the analysis of available work, a revised expression for describing secondary dendritic arm spacing during solidification of slab continuous casting was presented, and the relation between the ratio of primary dendritic arm spacing to secondary dendritic arm spacing and the cooling rate was obtained.展开更多
A mercury model has been developed to investigate the influences of Electromagnetic Mold Brake Ruler(EMBr-Ruler) and Flow Control Mold(FC Mold) on metal flow in slab continuous casting mold with the practical casting ...A mercury model has been developed to investigate the influences of Electromagnetic Mold Brake Ruler(EMBr-Ruler) and Flow Control Mold(FC Mold) on metal flow in slab continuous casting mold with the practical casting speed 1.0,1.3 and 2.0 m/min respectively.FC-Mold can efficiently repress the surface flow and its fluctuation.The expanding space of the jets is compressed by EMBr-Ruler and FC-Mold respectively,then the 'flow passage' where the vertical velocity of flow increases sharply is developed near the narrow wall with EMBr-Ruler and FC-Mold.It is bad for the development of the plug like flow.Only the nozzle ports are placed in the braking magnetic field region and the casting speed is suitable,EMBr can be beneficial to the formation of the plug like flow.The flow regime is improved with FC Mold when the casting speed is high(2.0 m/min),but EMBr can improve the flow field with medium casting speed(1.3 m/min),but when the casting speed is low(1.0 m/min),the effects of two types of EMBr are both unsatisfactory.展开更多
A three-dimensional finite-element model of slab continuous casting mold was conducted to clarify the effect of cooling structure on thermal behavior of copper plates. The results show that temperature distribution of...A three-dimensional finite-element model of slab continuous casting mold was conducted to clarify the effect of cooling structure on thermal behavior of copper plates. The results show that temperature distribution of hot surface is mainly governed by cooling structure and heat-transfer conditions. For hot surface centricity, maximum surface temperature promotions are 30 ℃and 15 ℃ with thickness increments of copper plates of 5 mm and nickel layers of 1 ram, respectively. The surface temperature without nickel layers is depressed by 10 ℃ when the depth increment of water slots is 2 mm and that with nickel layers adjacent to and away from mold outlet is depressed by 7℃ and 5 ℃, respectively. The specific trend of temperature distribution of transverse sections of copper plates is nearly free of cooling structure, but temperature is changed and its law is similar to the corresponding surface temperature.展开更多
In order to develop super-board and super-thick slabs, the flow and temperatur fields were studied in slab continuous casting molds under different practical conditions, such as slab dimensions, with-drawing slab spee...In order to develop super-board and super-thick slabs, the flow and temperatur fields were studied in slab continuous casting molds under different practical conditions, such as slab dimensions, with-drawing slab speed, design of nozzles, and superheat tempera-ture. The results showed that it is preferred to incline nozzle bores downwards and the submerged depth of the nozzles is best kept be-tween 250-300 mm. In addition, the solidified shell is thicker at the wide face than that at the narrow face, while the thin points alongthe wide face ekist both in the center and in the some area toward each respective end.展开更多
Unsteady fluid flows and level fluctuations in a thin slab continuous casting mould have significant influence on product quality. In this study, the phenomena concerning transient flow features and free surface motio...Unsteady fluid flows and level fluctuations in a thin slab continuous casting mould have significant influence on product quality. In this study, the phenomena concerning transient flow features and free surface motions were analyzed by means of the large eddy simulation （LES） software with the smagorinsky SGS model--VisualCast （VCast） II, where the Simpler algorithm on a body-fitted mesh was used to resolve governing equations. A series of water analog experiments on the fluid flow and the surface wave in the moulds of thin slab continuous casting were also performed. The results of fluid regions, middle of vortex and level fluctuation from digital simulations were identical with the results of the water analog experiments.展开更多
Electromagnetic stirring(EMS)is a well-known and widely used technology for controlling the fluid flow in continuous casting mold,and therein the selection of stirrer position is closely related to final product.To in...Electromagnetic stirring(EMS)is a well-known and widely used technology for controlling the fluid flow in continuous casting mold,and therein the selection of stirrer position is closely related to final product.To investigate the effect of stirrer position on initial solidification and inclusion capturing,a mathematical model coupling with electromagnetic field,turbulence flow,solidification,and inclusion movement was constructed.Through comparing the magnetic flux density,flow field and solidified shell thickness with measured data,the reliability of the mathematical model was proved.The uniform index has been introduced to judge the uniformity of solidified shell,and the washing effects of EMS on the numbers and distribution of captured inclusions were discussed.The results show that a diagonal jet flow toward the mold wide face has generated when EMS is applied,and upper EMS position can effectively improve the uniformity of temperature and the solidified shell within the mold.Meanwhile,due to the washing effect of EMS,the number of inclusions inside the solidified shell decreases,and the distribution of captured inclusions along the mold width changes evenly.Decreasing the stirrer position,the uniform index decreases firstly and then increases,and the probability of inclusion capture by solidified shell increases.Thus,the upper stirrer position is suggested,with which the uniformity of solidified shell and cleanliness of slab are rational.展开更多
Continuous casting of thin slabs is a key state project for 7th and sth five -year plans. On thebasis of foundamental works , CISRI condueted the tests of 102 heats in Lanzhou Steel Works in the periodof January 1991-...Continuous casting of thin slabs is a key state project for 7th and sth five -year plans. On thebasis of foundamental works , CISRI condueted the tests of 102 heats in Lanzhou Steel Works in the periodof January 1991- June 1992. Three slab assortments of 50× 900 mm . 70 × 900 mm , 70 × 500 mm were ex-amined. In June of 1992, 412 t steel of 46 heats were cast with the efficiency of 91. 3 %. This. result meetsthe requiremeni of the state in this period. The mould, hedt transfer . casting technology and factors influ-encing slab’s qualities are investigated as well.展开更多
基金Sponsored by Program for New Century Excellent Talents in University of China(NCET-08-0726)Beijing Nova Program of China(2007B027)
文摘Longitudinal cracks are common defects of continuous casting slabs and may lead to serious quality accidents. Image capturing and recognition of hot slabs is an effective way for on-line detection of cracks, and recognition of cracks is essential because the surface of hot slabs is very complicated. In order to detect the surface longitudinal cracks of the slabs, a new feature extraction method based on Curvelet transform and kernel locality preserving projections （KLPP） is proposed. First, sample images are decomposed into three levels by Curvelet transform. Second, Fourier transform is applied to all sub-band images and the Fourier amplitude spectrum of each sub-band is computed to get features with translational invariance. Third, five kinds of statistical features of the Fourier amplitude spectrum are computed and combined in different forms. Then, KLPP is employed for dimensionality reduction of the obtained 62 types of high-dimensional combined features. Finally, a support vector machine （SVM） is used for sample set classification. Experiments with samples from a real production line of continuous casting slabs show that the algorithm is effective to detect longitudinal cracks, and the classification rate is 91.89%.
基金supported financially by the National Science Foundation China(Nos.U1860206 and 51725402)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-17-001C2 and FRF-TP-19-037A2Z)+1 种基金the High Steel Center(HSC)at Yanshan UniversityBeijing International Center of Advanced and Intelligent Manufacturing of High Quality Steel Materials(ICSM)and the High Quality Steel Consortium(HQSC)at University of Science and Technology Beijing(USTB),China。
文摘In the current study, the transformation in the composition of non-metallic inclusions from the molten steel to the solidified steel was studied and the composition distribution of inclusions on the cross section of a linepine continuous casting slab was predicted. During cooling and solidification of the continuous casting strand, Al_(2)O_(3)-CaO inclusions reacted with the bulk steel and transformed to CaS-Al_(2)O_(3)-MgO-(CaO) ones in the continuous casting slab. The composition of inclusions on the cross section of the slab varied with locations due to the varied cooling rate. A model was established to predict the distribution of the composition of inclusions on the cross section of the continuous casting slab, coupling solidification and heat transfer of the continuous casting slab, the kinetic mass transfer of the dissolved elements in the solid steel, and thermodynamic calculation of inclusion transformation at different temperatures. The composition transformation of inclusions mainly occurred at the temperature between the liquidus and solidus of the linepipe steel. Inclusions were mainly CaS-Al_(2)O_(3)-MgO-(CaO) in slab center and were MgO-Al_(2)O_(3)-CaO-CaS within the subsurface of the slab. In the slab, the transformation fraction of inclusions was less than 10 % at corners while it reached 70 % at 50 mm below the surface of the slab.
文摘By means of Gleeble-1500 testing machine, the simulation of continuous casting process forAH32 steel was carried out and hot ductility and strength were determined. The cracking sensitivity was studied under the different temperatures and strain rates. The Precipitations of AIN at different temperatures and the fractures of high-temperature tensile samples were observed by using TEM （transmission electron microscope） and SEM （scanning electron microscope）. The factors affecting the brittle temperature zone were discussed.
文摘Two-dimension unsteady heat transfer model was applied to obtain the surfacetemperature and the shell thickness of continuous casting slabs during the process ofsolidification. On the basis of which, the mathematical model of strain at the interface of solidand liquid steel was set up. Through which, the strain in the solidifying shell under normal andabnormal operation conditions was gained. The results indicate that the strain is small under thenormal operation conditions and the internal crack never happens. However, when the variation of theroll gap is above 2 mm, the strain caused by which is greater than that caused by bulging.Furthermore, the total strain exceeds the critical one and the internal crack is the result. So itis of great importance to maintain the fine state of continuous casting machine to avoid theappearance of internal crack.
基金the Natural Science Foundation of Liaoning under grant No.20022150 the National Natural Science Foundation of China under grant No.50271030.
文摘By calculating the electron structures of the phases that phosphor, sulfur and alloying elements dissolving inγ-Fe, the reason why alloying elements can bring centerline segregation in continuous casting slab (CCS) with nA, the number of electrons on the strongest covalent bonds, and the structure formation factor S were investigated, and an electron structural criterion to control and to eliminate the centerline segregation was advanced. Basing on this, the electron structures of a part of rare earth phosphides and sulfides are calculated, the physical mechanism that rare earth elements can control the segregation of phosphor and sulfur is analyzed, and the criterion is well verified.
文摘By means of the numerical simulation method,the mathematical model of inclusions movement in the mold is established under the condition of austenitic and fen-itic stainless steel slab production. According to the simulation results, the main zones for inclusion particles accumulation were found and many factors that affected floating-up probability of inclusion particles were identified. These factors include the inclusion particle size, the casting speed and the slab width, etc. It is believed that the inclusion particle size is the key one among these factors.
基金supported by the National Natural Science Foundation of China(No.52474355)the Liaoning Province Science and Technology Plan Joint Program(Key Research and Development Program Project),China(Nos.2022JH25/10200003 and 2023JH2/101800058).
文摘The application of liquid core reduction(LCR)technology in thin slab continuous casting can refine the internal microstruc-tures of slabs and improve their production efficiency.To avoid crack risks caused by large deformation during the LCR process and to minimize the thickness of the slab in bending segments,the maximum theoretical reduction amount and the corresponding reduction scheme for the LCR process must be determined.With SPA-H weathering steel as a specific research steel grade,the distributions of tem-perature and deformation fields of a slab with the LCR process were analyzed using a three-dimensional thermal-mechanical finite ele-ment model.High-temperature tensile tests were designed to determine the critical strain of corner crack propagation and intermediate crack initiation with various strain rates and temperatures,and a prediction model of the critical strain for two typical cracks,combining the effects of strain rate and temperature,was proposed by incorporating the Zener-Hollomon parameter.The crack risks with different LCR schemes were calculated using the crack risk prediction model,and the maximum theoretical reduction amount for the SPA-H slab with a transverse section of 145 mm×1600 mm was 41.8 mm,with corresponding reduction amounts for Segment 0 to Segment 4 of 15.8,7.3,6.5,6.4,and 5.8 mm,respectively.
基金supported by National Natural Science Foundation of China(Nos.52325406 and 52374330)Fundamental Research Funds for the Central Universities(No.N2225046).
文摘A mathematical model coupling flow,solidification,strain-stress,and interface failure was developed.Following identification of crack source type through thermal tensile experiment and validation by strain-stress comparison,the model was used to investigate slab cracking tendency near precipitated phases,considering various locations,sizes and shapes of them.The results show that the jet from submerged entry nozzle creates a“double roll”flow pattern during continuous casting,resulting in more uniform temperature distributions at slab corner and wide surface center compared with narrow surface center.Consequently,precipitated phases,particularly those located on the narrow surface,readily induce stress concentration and thus increase cracking tendency.A smaller precipitated phase size can reduce the stress concentration zone,while a more spherical shape can distribute surrounding stress along its surface and lower the internal stress within it,thereby decreasing the risk of slab cracking during continuous casting.The optimal precipitated phase exhibits a spherical or ellipsoidal shape with a major axis of less than 5µm,minimizing its potential to initiate cracks.
基金financially supported by the National Natural Science Foundation of China(No.52474355)the Liaoning Province Science and Technology Plan Joint Program(Key Research and Development Program Project,Nos.2022JH25/10200003 and 2023JH2/101800058)the Fundamental Research Funds for the Central Universities(Nos.N25YJS003 and N25DCG006)。
文摘The microstructural characteristics of austenite in Ti microalloyed steel during continuous casting significantly influence thethermoplasticity,thereby affecting the quality of the slab.In this work,a prediction model for two-stage austenite growth under varyingcooling rates was established by incorporating the effect of second-phase pinning and high-temperature ferrite-austenite phase transform-ation and growth theory.The results indicate that with 0.02wt%Ti,the high-temperature ferrite growth exhibits typical parabolic growthcharacteristics.When the Ti content increases to 0.04wt%,the high-temperature ferrite grain boundary migration rate significantly slowsduring the initial solidification stage.The predicted austenite grain sizes for 0.02wt%Ti microalloyed steel at the center,quarter,and sur-face of the slab are 5592,3529,and 1524μm,respectively.For 0.04wt%Ti microalloyed steel,the austenite grain sizes are 4074,2942,and 1179μm at the same positions.The average error is within 5%.As the Ti content increases from 0.02wt% to 0.04wt%,the austenitegrain refinement at the center is most significant,with an average grain size reduction of 27.14%.
基金National Natural Science Foundation of China(Nos.U21A20117,52104347 and 52272078)the Fundamental Research Funds for the Central Universities(No.N2409006)Natural Science Foundation of Liaoning Province(2023-MSBA-135)for the financial support.
文摘Controlling molten steel flow in the mold and stabilizing the meniscus are critical challenges during the continuous casting,directly impacting the surface quality and internal quality of the final steel slab product.The effects of electromagnetic swirling flow in nozzle(EMSFN)technology on molten steel flow in the mold during slab continuous casting under various casting speeds were investigated.A real-time adjustable EMSFN was developed,and a three-dimensional unsteady Reynolds-averaged Navier–Stokes turbulence mathematical model was established to simulate the flow field within the mold.The results demonstrate that the EMSFN effectively stabilizes the outflow from nozzle,reduces the impact depth and surface velocity of the molten steel,mitigates meniscus fluctuations,and promotes stable flow within the mold.However,a certain matching relationship exists between the casting speed and the current intensity.For the experimental medium-thick slab specifications,the optimal current intensities were found to be 100,130,and 200 A at casting speeds of 1.0,1.5,and 2.0 m/min,respectively.EMSFN can optimize the mold flow field under different casting speeds,providing theoretical support for improving the quality of continuously cast slab products.
基金Project(50634030) supported by the National Natural Science Foundation of ChinaProject(20090042120005) supported by the Doctorate Foundation of the Ministry of Education of ChinaProject(2006CB605208-1) supported by the State Basic Research Program of China
文摘Deformation behavior of slab at the straightening stage during continuous casting was simulated by the explicit dynamic finite element method,and the stress distribution along the width direction of the slab and its change regularity at slab center during continuous casting were obtained.The influence of distribution and change of stress on the propagation of longitudinal cracks on slab surface was discussed.The results show that the tensional stress appears on slab surface at the inner arc side and the compressive stress appears on slab surface at the outer arc side at stages 6-8 in straightening zone during continuous casting.Longitudinal cracks generally appear on slab top surface and do not appear on slab bottom surface,which are also observed in industry.
基金the support from National Natural Science Foundation of China(52274318).
文摘The correlation between the longitudinal crack occurrence and integrated heat transfer of the mold with data mining methods was investigated.Firstly,three kinds of support vector machine models based on principal component analysis with different input features were established to explore the effect of integrated heat transfer on the accuracy of the prediction model for the longitudinal crack.The results show that the accuracy was improved while features including mean and standard deviation of integrated heat transfer were added.Then,the difference in integrated heat transfer between defect and normal samples under the same process parameters was quantitatively compared.Compared with normal samples,the temperature difference of cooling water for defect samples decreased by 0.65%,and the temperature difference fluctuation increased by 31.1%.Finally,the literature data were used to provide support for the quantitative correlation according to defect formation mechanism.A new criterion for the prediction of longitudinal crack and a discovering method for correlation between product quality and process parameters in the manufacturing industry have been provided.
基金Item Sponsored by National Natural Science Foundation of China (50334010) and Fokying Tung Education Foundation (104017)
文摘The morphology of manganese sulfide formed during thin slab continuous casting process in low-carbon steel produced by compact strip production （CSP） technique was investigated. Using transmission electron microscopy analysis, it was seen that a majority of manganese sulfides precipitated at austenite grain boundaries, the morphologies of which were spherical or close to the spherical shape and the size of MnS precipitates ranged from 30 nm to 100 nm. A mathematical model of the manganese sulfide precipitation in this process was developed based on classical nucleation theory. Under the given conditions, the starting and finishing precipitation temperatures of MnS in the continuous casting thin slab of the studied low-carbon steel are 1 189 ℃ and 1 171 ℃, respectively, and the average diameter of MnS precipitates is about 48 nm within this precipitation temperature range. The influences of chemical components and thermo-mechanical processing conditions on the precipitation behavior of MnS in the same process were also discussed.
基金Item Sponsored by Program for New Century Excellent Talents in University of Ministry of Education (NCET-04-0285)
文摘The operating conditions during the continuous casting process have a great effect on the microstructure of slab solidification, including primary and secondary dendritic arm spacing. On the basis of the analysis of available work, a revised expression for describing secondary dendritic arm spacing during solidification of slab continuous casting was presented, and the relation between the ratio of primary dendritic arm spacing to secondary dendritic arm spacing and the cooling rate was obtained.
基金Item Sponsored by National Natural Science Foundation of China[No.50674066]
文摘A mercury model has been developed to investigate the influences of Electromagnetic Mold Brake Ruler(EMBr-Ruler) and Flow Control Mold(FC Mold) on metal flow in slab continuous casting mold with the practical casting speed 1.0,1.3 and 2.0 m/min respectively.FC-Mold can efficiently repress the surface flow and its fluctuation.The expanding space of the jets is compressed by EMBr-Ruler and FC-Mold respectively,then the 'flow passage' where the vertical velocity of flow increases sharply is developed near the narrow wall with EMBr-Ruler and FC-Mold.It is bad for the development of the plug like flow.Only the nozzle ports are placed in the braking magnetic field region and the casting speed is suitable,EMBr can be beneficial to the formation of the plug like flow.The flow regime is improved with FC Mold when the casting speed is high(2.0 m/min),but EMBr can improve the flow field with medium casting speed(1.3 m/min),but when the casting speed is low(1.0 m/min),the effects of two types of EMBr are both unsatisfactory.
基金Project(51004031) supported by the National Natural Science Foundation of ChinaProject(50925415) supported by the National Outstanding Young Scientist Foundation of China+1 种基金Project(20100042120012) supported by the Special Research Fund for Doctoral Programs of Ministry of Education of ChinaProject(N090402022) supported by the Fundamental Research Funds for the Central Universities of China
文摘A three-dimensional finite-element model of slab continuous casting mold was conducted to clarify the effect of cooling structure on thermal behavior of copper plates. The results show that temperature distribution of hot surface is mainly governed by cooling structure and heat-transfer conditions. For hot surface centricity, maximum surface temperature promotions are 30 ℃and 15 ℃ with thickness increments of copper plates of 5 mm and nickel layers of 1 ram, respectively. The surface temperature without nickel layers is depressed by 10 ℃ when the depth increment of water slots is 2 mm and that with nickel layers adjacent to and away from mold outlet is depressed by 7℃ and 5 ℃, respectively. The specific trend of temperature distribution of transverse sections of copper plates is nearly free of cooling structure, but temperature is changed and its law is similar to the corresponding surface temperature.
文摘In order to develop super-board and super-thick slabs, the flow and temperatur fields were studied in slab continuous casting molds under different practical conditions, such as slab dimensions, with-drawing slab speed, design of nozzles, and superheat tempera-ture. The results showed that it is preferred to incline nozzle bores downwards and the submerged depth of the nozzles is best kept be-tween 250-300 mm. In addition, the solidified shell is thicker at the wide face than that at the narrow face, while the thin points alongthe wide face ekist both in the center and in the some area toward each respective end.
文摘Unsteady fluid flows and level fluctuations in a thin slab continuous casting mould have significant influence on product quality. In this study, the phenomena concerning transient flow features and free surface motions were analyzed by means of the large eddy simulation （LES） software with the smagorinsky SGS model--VisualCast （VCast） II, where the Simpler algorithm on a body-fitted mesh was used to resolve governing equations. A series of water analog experiments on the fluid flow and the surface wave in the moulds of thin slab continuous casting were also performed. The results of fluid regions, middle of vortex and level fluctuation from digital simulations were identical with the results of the water analog experiments.
基金financially supported by the National Natural Science Foundation of China(Nos.U1860107 and 62074181).
文摘Electromagnetic stirring(EMS)is a well-known and widely used technology for controlling the fluid flow in continuous casting mold,and therein the selection of stirrer position is closely related to final product.To investigate the effect of stirrer position on initial solidification and inclusion capturing,a mathematical model coupling with electromagnetic field,turbulence flow,solidification,and inclusion movement was constructed.Through comparing the magnetic flux density,flow field and solidified shell thickness with measured data,the reliability of the mathematical model was proved.The uniform index has been introduced to judge the uniformity of solidified shell,and the washing effects of EMS on the numbers and distribution of captured inclusions were discussed.The results show that a diagonal jet flow toward the mold wide face has generated when EMS is applied,and upper EMS position can effectively improve the uniformity of temperature and the solidified shell within the mold.Meanwhile,due to the washing effect of EMS,the number of inclusions inside the solidified shell decreases,and the distribution of captured inclusions along the mold width changes evenly.Decreasing the stirrer position,the uniform index decreases firstly and then increases,and the probability of inclusion capture by solidified shell increases.Thus,the upper stirrer position is suggested,with which the uniformity of solidified shell and cleanliness of slab are rational.
文摘Continuous casting of thin slabs is a key state project for 7th and sth five -year plans. On thebasis of foundamental works , CISRI condueted the tests of 102 heats in Lanzhou Steel Works in the periodof January 1991- June 1992. Three slab assortments of 50× 900 mm . 70 × 900 mm , 70 × 500 mm were ex-amined. In June of 1992, 412 t steel of 46 heats were cast with the efficiency of 91. 3 %. This. result meetsthe requiremeni of the state in this period. The mould, hedt transfer . casting technology and factors influ-encing slab’s qualities are investigated as well.
