Geotechnical engineering that relates to the energy and environmental problem is receiving more and more attention worldwide.It is of great theoretical and practical value to study the properties of soil under thermal...Geotechnical engineering that relates to the energy and environmental problem is receiving more and more attention worldwide.It is of great theoretical and practical value to study the properties of soil under thermal mechanical coupling and its mathematical description.Firstly,based on the general function,a unified primary and secondary consolidation model of saturated soil considering heating temperature is deduced.Combining the existing research achievements,a practical model is obtained which comprehensively reflects the effective stress change,creep and heating effects.After that,a series of thermo-consolidation tests are carried out using a temperature controlled consolidation instrument to study the effects of effective stress,temperature and consolidation duration on saturated soils.The corresponding functional formulas and parameters are obtained thusly.On this basis,the calculation and analysis are carried out to check the reliability and applicability of the newly proposed model.The new model is simple and practical and the parameters are easy to be obtained.And it describes the main law of consolidation compression of saturated soils under the thermal mechanical coupling effect.Therefore,it is suggested for theoretical analysis of thermal geotechnical engineering problems.展开更多
The main objective of this study was to determine the consolidation behaviour of clay slurries.A finegrained clay with high consistency limits(W_L = 180%,w_P= 120%) was investigated using conventional oedometer and be...The main objective of this study was to determine the consolidation behaviour of clay slurries.A finegrained clay with high consistency limits(W_L = 180%,w_P= 120%) was investigated using conventional oedometer and bench-top centrifuge tests.Results indicated that the slurry had an apparent preconsolidation(due to initial conditions,electrochemical interactions,tortuous drainage,and thixotropic strength) from e = 5.7 to e = 5.5 followed by virgin compression.Likewise,the low hydraulic conductivity(10^(-10)-10^(-12) m/s) was due to low porosity(small pore throats) and high tortuosity(long flow paths).Unlike consolidation of soils,the c_v and m_v decreased with increasing σ' but increased with increasing e and k.The data from the two tests correlated well in the range of σ' = 10-65 kPa,e = 5.5-3.86,k= 1.7 × 10^(-10)-5×10^(-11) m/s,F_c = 1-40 MN.New equations were developed to correlate the consolidation parameters(e,σ',k) with F_c.The deviation of k beyond 40 MN(e = 4.65) was due to deviation from the initial straight line portion of the settlement curve in the centrifuge test.展开更多
Lime-treatment of clayey soil significantly increases its shear and tensile strengths.Consequently,the tensile strength of lime-treated soils deserves careful investigation because it may provide an appreciable benefi...Lime-treatment of clayey soil significantly increases its shear and tensile strengths.Consequently,the tensile strength of lime-treated soils deserves careful investigation because it may provide an appreciable benefit for the stability of earth structures.This study investigates the tensile and shear strengths of an untreated and lime-treated(3%of lime)plastic clay at different curing times(7 d,56 d and 300 d),through triaxial tension and compression tests.Triaxial tension tests are performed using“diabolo-shaped”soil samples with reduced central section,such that the central part of the specimen can be under axial tension while both end-sections remain in axial compression.Consolidated undrained(CU)conditions with measurement of pore water pressure allow analyzing the failure conditions through effective stress and total stress approaches.The results of triaxial tension tests reveal that the failure occurs under tensile mode at low confining pressure while extensional shear failure mode is observed under higher confining pressure.Consequently,a classical Mohr-Coulomb shear failure criterion must be combined with a cut-off tensile strength criterion that is not affected by the confining pressure.When comparing shear failure under compression and tension,a slight anisotropy is observed.展开更多
In addressing problematic soils,geotechnical engineers employ two key strategies:compatibility and improvement.This study focuses on soft and CL deltaic sediments,and seeks to enhance cementation by investigating micr...In addressing problematic soils,geotechnical engineers employ two key strategies:compatibility and improvement.This study focuses on soft and CL deltaic sediments,and seeks to enhance cementation by investigating microbially-induced calcium carbonate precipitation(MICP).Sporosarcina pasteurii bacteria,together with a cementation solution(urea and calcium-containing salt),were electrokinetically injected into deltaic clay soil from the Telar River in Iran.The initial samples,with a dry unit weight(γ_(d))of 12.75 kN/m^(3),underwent injections in two modes:simultaneous injection of the bacterial and cementation solutions and individual injection in a sequential order.Unconfined compression strength tests and laboratory vane shear tests were conducted to assess changes in soil strength parameters,while a consolidation test was performed to investigate alterations in soil settlement parameters.A comparative analysis with an electroosmosis control sample revealed a remarkable increase in compressive strength and undrained shear strength for MICP bio-electrokinetic improvement.Moreover,the consolidation test demonstrated that the compression index(C_(c))and recompression index(C_(r))exhibited a more pronounced decline in the simultaneous injection than individual injection.This highlights the dual impact of the bio-electrokinetic method,namely the enhancement of shear strength and the mitigation of settlement in deltaic clay soil.The calcium carbonate content was measured for the samples,and the results indicated a higher degree of participation for the samples subjected to simultaneous injection.Microstructure analyses were conducted on samples,and calcite and vaterite were observed in biocemented samples.展开更多
The microbial-induced calcite precipitation(MICP)technique has been developed as a sustainable methodology for the improvement of the engineering characteristics of sandy soils.However,the efficiency of MICP-treated s...The microbial-induced calcite precipitation(MICP)technique has been developed as a sustainable methodology for the improvement of the engineering characteristics of sandy soils.However,the efficiency of MICP-treated sand has not been well established in the literature considering cyclic loading under undrained conditions.Furthermore,the efficacy of different bacterial strains in enhancing the cyclic properties of MICP-treated sand has not been sufficiently documented.Moreover,the effect of wetting-drying(WD)cycles on the cyclic characteristics of MICP-treated sand is not readily available,which may contribute to the limited adoption of MICP treatment in field applications.In this study,strain-controlled consolidated undrained(CU)cyclic triaxial testing was conducted to evaluate the effects of MICP treatment on standard Ennore sand from India with two bacterial strains:Sporosarcina pasteurii and Bacillus subtilis.The treatment durations of 7 d and 14 d were considered,with an interval of 12 h between treatments.The cyclic characteristics,such as the shear modulus and damping ratio,of the MICP-treated sand with the different bacterial strains have been estimated and compared.Furthermore,the effect of WD cycles on the cyclic characteristics of MICP-treated sand has been evaluated considering 5–15 cycles and aging of samples up to three months.The findings of this study may be helpful in assessing the cyclic characteristics of MICP-treated sand,considering the influence of different bacterial strains,treatment duration,and WD cycles.展开更多
Deformation characteristics of light weight soil with different EPS (expanded polystyrene) sizes were investigated by consolidation tests.The results show that the confined stress-strain relation curve is in S shape,w...Deformation characteristics of light weight soil with different EPS (expanded polystyrene) sizes were investigated by consolidation tests.The results show that the confined stress-strain relation curve is in S shape,which has a good homologous relation with e-p curve and e-lgp curve,and three types of curves reflect obvious structural characteristics of light weight soil.When cement mixed ratio and EPS volume ratio are the same for different specimens,structural strength decreases with the increase of EPS size,but compressibility indexes basically keep unchanged within the structural strength.The settlement of light weight soil can be divided into instantaneous settlement and primary consolidation settlement.It has no obvious rheology property,and 90% of total consolidation deformation can be finished in 1 min.Settlement-time relation of light weight soil can be predicted by the hyperbolic model.S-lgt curve of light weight soil is not in anti-S shape.It is proved that there is no secondary consolidation section,so consolidation coefficient cannot be obtained by time logarithm method.Structural strength and unit price decrease with the increase of EPS size,but the reducing rate of the structural strength is lower than that of the unit price,so the cost of mixed soil can be reduced by increasing the EPS size.The EPS beads with 3-5 mm in diameter are suggested to be used in the construction process,and the prescription of mixed soil can be optimized.展开更多
The deformation of aquitard is the main contribution to land subsidence in the North China Plain, and the water released from aquitard compaction may be a large portion of the exploited groundwater. In this study, the...The deformation of aquitard is the main contribution to land subsidence in the North China Plain, and the water released from aquitard compaction may be a large portion of the exploited groundwater. In this study, the consolidation test was employed to understand the mechanics on the drainage and deformation of aquitard. The results suggested the strain of aquitard mainly resulted from the difference of hydraulic head between aquifers. And it was decreased with depth of aquitard at the same hydrodynamic pressure. In contrast with the interbed within aquifers, the aquitard was deformable when it was compressed. The weakly bound water was significantly released when the void ratio was about 0.44–0.45, and the EC of water released from the aquitard was decreased with the compacting process. The data from the consolidation test suggested that the pumping of groundwater from aquifer III might be less contribution to the land subsidence with respect to other aquifers in the future.展开更多
Conventional consolidation tests on reconstituted specimens of numerous natural soft clays show a decreasing of creep index Cae with increasing soil density. Based on all selected and conducted experimental results, a...Conventional consolidation tests on reconstituted specimens of numerous natural soft clays show a decreasing of creep index Cae with increasing soil density. Based on all selected and conducted experimental results, a modified creep index Cae＊ defined in double logarithmic plane lge-lgt, was plotted for various clays, from which Cae＊ can be assumed as a constant for different soil densities. Then, the modified creep index was applied to a newly developed elastic viscoplastic model. In this way, the modified creep index Ca＊ can naturally take into account the nonlinear Cae revealing the influence of soil density in the soil assemblies without additional parameters. Finally, the enhanced model was incorporated into the finite element code ABAQUS and used to simulate a consolidation test and a test embankment. The improvement of simulations by the modified creep index was highlighted by comparing simulations using the conventional creep index Cae.展开更多
Isotropic consolidation test and consolidated-undrained triaxial test were first undertaken to obtain the parameters of the modified cam-clay(MCC)model and the behavior of natural clayey soil.Then,for the first time,n...Isotropic consolidation test and consolidated-undrained triaxial test were first undertaken to obtain the parameters of the modified cam-clay(MCC)model and the behavior of natural clayey soil.Then,for the first time,numerical simulation of the two tests was performed by three-dimensional finite element method(FEM)using ABAQUS program.The consolidated-drained triaxial test was also simulated by FEM and compared with theoretical results of MCC model.Especially,the behaviors of MCC model during unloading and reloading were analyzed in detail by FEM.The analysis and comparison indicate that the MCC model is able to accurately describe many features of the mechanical behavior of the soil in isotropic consolidation test and consolidated-drained triaxial test.And the MCC model can well describe the variation of excess pore water pressure with the development of axial strain in consolidated-undrained triaxial test,but its ability to predict the relationship between axial strain and shear stress is relatively poor.The comparison also shows that FEM solutions of the MCC model are basically identical to the theoretical ones.In addition,Mandel-Cryer effect unable to be discovered by the conventional triaxial test in laboratories was disclosed by FEM.The analysis of unloading-reloading by FEM demonstrates that the MCC model disobeys the law of energy conservation under the cyclic loading condition if the elastic shear modulus is linearly pressure-dependent.展开更多
his study focused on exploring the specificity of mechanical behavior for completely weathered granite,as a special soil,by consolidated drained triaxial tests.The influences of dry density(1.60,1.70,1.80 and 1.90 g/c...his study focused on exploring the specificity of mechanical behavior for completely weathered granite,as a special soil,by consolidated drained triaxial tests.The influences of dry density(1.60,1.70,1.80 and 1.90 g/cm^(3)),confining pressure(100,200,400 and 600 kPa),and moisture content(13.0%,that is,natural moisture content)were investigated in the present work.A newly developed Duncan-Chang model was established based on the experimental data and Duncan-Chang model.The influence of each parameter on the type of the proposed model curve was also evaluated.The experimental results revealed that with varying dry density and confining pressure,the deviatoric stress–strain curves have diversified characteristics including strain-softening,strain-stabilization and strain-hardening.Under high confining pressure condition,specimens with different densities all showed strain-hardening characteristic.Whereas at the low confining pressure levels,specimens with higher densities gradually transform into softening characteristics.Except for individual compression shear failure,the deformation modes of the specimens all showed swelling deformation,and all the damaged specimens maintained good integrity.Through comparing the experiment results,the strain-softening or strain-hardening behavior of CWG specimens could be predicted following the proposed model with high accuracy.Additionally,the proposed model can accurately characterize the key mechanical indicators,such as tangent modulus,peak value and residual strength,which is simple to implement and depends on fewer parameters.展开更多
The deformation of soil skeleton and migration of pore fluid are the major factors relevant to the triggeringof and damages by liquefaction. The influence of pore fluid migration during earthquake has beendemonstrated...The deformation of soil skeleton and migration of pore fluid are the major factors relevant to the triggeringof and damages by liquefaction. The influence of pore fluid migration during earthquake has beendemonstrated from recent model experiments and field case studies. Most of the current liquefactionassessment models are based on testing of isotropic liquefiable materials. However the recent NewZealand earthquake shows much severer damages than those predicted by existing models. A fundamentalcause has been contributed to the embedded layers of low permeability silts. The existence ofthese silt layers inhibits water migration under seismic loads, which accelerated liquefaction and causeda much larger settlement than that predicted by existing theories. This study intends to understand theprocess of moisture migration in the pore space of sand using discrete element method （DEM） simulation.Simulations were conducted on consolidated undrained triaxial testing of sand where a cylindersample of sand was built and subjected to a constant confining pressure and axial loading. The porositydistribution was monitored during the axial loading process. The spatial distribution of porosity changewas determined, which had a direct relationship with the distribution of excess pore water pressure. Thenon-uniform distribution of excess pore water pressure causes moisture migration. From this, themigration of pore water during the loading process can be estimated. The results of DEM simulationshow a few important observations： （1） External forces are mainly carried and transmitted by the particlechains of the soil sample; （2） Porosity distribution during loading is not uniform due to nonhomogeneoussoil fabric （i.e. the initial particle arrangement and existence of particle chains）; （3）Excess pore water pressure develops differently at different loading stages. At the early stage of loading,zones with a high initial porosity feature higher porosity changes under the influence of external loading,which leads to a larger pore pressure variation （increase or decrease） in such zones. As the axial strainincreases, particle rearrangement occurs and final porosity distribution has minor relationship with theinitial condition, and the pore pressure distribution becomes irregular. The differences in the porepressure development imply that water will migrate in the pore space in order to balance the pore waterpressure distribution. The results of this simulation offer an insight on the microscale water migration inthe soil pore space, which is important for holistic description of the triggering of soil liquefaction in lightof its microstructure. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
This research objective is to propose a co-valorization of powdered tuff, containing a slight amount of clay and dune sand, by mixing the two substances at different rates such as 0%, 5%, 15%, 25% and 35% of sand. The...This research objective is to propose a co-valorization of powdered tuff, containing a slight amount of clay and dune sand, by mixing the two substances at different rates such as 0%, 5%, 15%, 25% and 35% of sand. The adapted criteria formulas are those recommended by the technical Saharan road. The results of the proposed study showed that ＂tuff-sand＂ mixtures are denser with a lower optimum water content modified proctor, the fine rate decreases together with the plasticity index, whereas the bearing index （CBR： California bearing ratio test） increases. The intrinsic characteristics, cohesion and sensitivity of mixtures with respect to compactness are almost identical to those oftuffwithout addition. The optimal adapted sand incorporation rate is estimated at 25% at 96% of compactness. Under these conditions, the amount of fines decreases from 40% to an acceptable level of 25% and the plasticity index from 16.2 to 12. The compaction water content decreases by 36% and the CBR （bearing index） increases by 30% and the compressive strength and sensitivity, according to compactness, of the elaborated material are almost identical to those oftuffwithout addition.展开更多
基金Project(51608281)supported by the National Natural Science Foundation of ChinaProject(LGG21E080005)supported by the Provincial Natural Science Foundation of Zhejiang Province,China。
文摘Geotechnical engineering that relates to the energy and environmental problem is receiving more and more attention worldwide.It is of great theoretical and practical value to study the properties of soil under thermal mechanical coupling and its mathematical description.Firstly,based on the general function,a unified primary and secondary consolidation model of saturated soil considering heating temperature is deduced.Combining the existing research achievements,a practical model is obtained which comprehensively reflects the effective stress change,creep and heating effects.After that,a series of thermo-consolidation tests are carried out using a temperature controlled consolidation instrument to study the effects of effective stress,temperature and consolidation duration on saturated soils.The corresponding functional formulas and parameters are obtained thusly.On this basis,the calculation and analysis are carried out to check the reliability and applicability of the newly proposed model.The new model is simple and practical and the parameters are easy to be obtained.And it describes the main law of consolidation compression of saturated soils under the thermal mechanical coupling effect.Therefore,it is suggested for theoretical analysis of thermal geotechnical engineering problems.
基金the University of Regina for providing laboratory space and the Natural Science and Engineering Research Council of Canada for financial assistance
文摘The main objective of this study was to determine the consolidation behaviour of clay slurries.A finegrained clay with high consistency limits(W_L = 180%,w_P= 120%) was investigated using conventional oedometer and bench-top centrifuge tests.Results indicated that the slurry had an apparent preconsolidation(due to initial conditions,electrochemical interactions,tortuous drainage,and thixotropic strength) from e = 5.7 to e = 5.5 followed by virgin compression.Likewise,the low hydraulic conductivity(10^(-10)-10^(-12) m/s) was due to low porosity(small pore throats) and high tortuosity(long flow paths).Unlike consolidation of soils,the c_v and m_v decreased with increasing σ' but increased with increasing e and k.The data from the two tests correlated well in the range of σ' = 10-65 kPa,e = 5.5-3.86,k= 1.7 × 10^(-10)-5×10^(-11) m/s,F_c = 1-40 MN.New equations were developed to correlate the consolidation parameters(e,σ',k) with F_c.The deviation of k beyond 40 MN(e = 4.65) was due to deviation from the initial straight line portion of the settlement curve in the centrifuge test.
文摘Lime-treatment of clayey soil significantly increases its shear and tensile strengths.Consequently,the tensile strength of lime-treated soils deserves careful investigation because it may provide an appreciable benefit for the stability of earth structures.This study investigates the tensile and shear strengths of an untreated and lime-treated(3%of lime)plastic clay at different curing times(7 d,56 d and 300 d),through triaxial tension and compression tests.Triaxial tension tests are performed using“diabolo-shaped”soil samples with reduced central section,such that the central part of the specimen can be under axial tension while both end-sections remain in axial compression.Consolidated undrained(CU)conditions with measurement of pore water pressure allow analyzing the failure conditions through effective stress and total stress approaches.The results of triaxial tension tests reveal that the failure occurs under tensile mode at low confining pressure while extensional shear failure mode is observed under higher confining pressure.Consequently,a classical Mohr-Coulomb shear failure criterion must be combined with a cut-off tensile strength criterion that is not affected by the confining pressure.When comparing shear failure under compression and tension,a slight anisotropy is observed.
文摘In addressing problematic soils,geotechnical engineers employ two key strategies:compatibility and improvement.This study focuses on soft and CL deltaic sediments,and seeks to enhance cementation by investigating microbially-induced calcium carbonate precipitation(MICP).Sporosarcina pasteurii bacteria,together with a cementation solution(urea and calcium-containing salt),were electrokinetically injected into deltaic clay soil from the Telar River in Iran.The initial samples,with a dry unit weight(γ_(d))of 12.75 kN/m^(3),underwent injections in two modes:simultaneous injection of the bacterial and cementation solutions and individual injection in a sequential order.Unconfined compression strength tests and laboratory vane shear tests were conducted to assess changes in soil strength parameters,while a consolidation test was performed to investigate alterations in soil settlement parameters.A comparative analysis with an electroosmosis control sample revealed a remarkable increase in compressive strength and undrained shear strength for MICP bio-electrokinetic improvement.Moreover,the consolidation test demonstrated that the compression index(C_(c))and recompression index(C_(r))exhibited a more pronounced decline in the simultaneous injection than individual injection.This highlights the dual impact of the bio-electrokinetic method,namely the enhancement of shear strength and the mitigation of settlement in deltaic clay soil.The calcium carbonate content was measured for the samples,and the results indicated a higher degree of participation for the samples subjected to simultaneous injection.Microstructure analyses were conducted on samples,and calcite and vaterite were observed in biocemented samples.
基金the financial support provided by the Ministry of Education(MoE),Government of IndiaThe second author acknowledges Coal India Limited for providing financial assistance for the research(Project No.CIL/R&D/01/73/2021).
文摘The microbial-induced calcite precipitation(MICP)technique has been developed as a sustainable methodology for the improvement of the engineering characteristics of sandy soils.However,the efficiency of MICP-treated sand has not been well established in the literature considering cyclic loading under undrained conditions.Furthermore,the efficacy of different bacterial strains in enhancing the cyclic properties of MICP-treated sand has not been sufficiently documented.Moreover,the effect of wetting-drying(WD)cycles on the cyclic characteristics of MICP-treated sand is not readily available,which may contribute to the limited adoption of MICP treatment in field applications.In this study,strain-controlled consolidated undrained(CU)cyclic triaxial testing was conducted to evaluate the effects of MICP treatment on standard Ennore sand from India with two bacterial strains:Sporosarcina pasteurii and Bacillus subtilis.The treatment durations of 7 d and 14 d were considered,with an interval of 12 h between treatments.The cyclic characteristics,such as the shear modulus and damping ratio,of the MICP-treated sand with the different bacterial strains have been estimated and compared.Furthermore,the effect of WD cycles on the cyclic characteristics of MICP-treated sand has been evaluated considering 5–15 cycles and aging of samples up to three months.The findings of this study may be helpful in assessing the cyclic characteristics of MICP-treated sand,considering the influence of different bacterial strains,treatment duration,and WD cycles.
基金Project(2012JQ7013)supported by the Natural Science Foundation of Shaanxi Province,ChinaProject(QN2012025)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(2011BSJJ084)supported by Research Foundation of Northwest A&F University,China
文摘Deformation characteristics of light weight soil with different EPS (expanded polystyrene) sizes were investigated by consolidation tests.The results show that the confined stress-strain relation curve is in S shape,which has a good homologous relation with e-p curve and e-lgp curve,and three types of curves reflect obvious structural characteristics of light weight soil.When cement mixed ratio and EPS volume ratio are the same for different specimens,structural strength decreases with the increase of EPS size,but compressibility indexes basically keep unchanged within the structural strength.The settlement of light weight soil can be divided into instantaneous settlement and primary consolidation settlement.It has no obvious rheology property,and 90% of total consolidation deformation can be finished in 1 min.Settlement-time relation of light weight soil can be predicted by the hyperbolic model.S-lgt curve of light weight soil is not in anti-S shape.It is proved that there is no secondary consolidation section,so consolidation coefficient cannot be obtained by time logarithm method.Structural strength and unit price decrease with the increase of EPS size,but the reducing rate of the structural strength is lower than that of the unit price,so the cost of mixed soil can be reduced by increasing the EPS size.The EPS beads with 3-5 mm in diameter are suggested to be used in the construction process,and the prescription of mixed soil can be optimized.
基金supported by the National Basic Research Program of China (No. 2010CB428803) the National Natural Science Foundation of China (No. 41272252)
文摘The deformation of aquitard is the main contribution to land subsidence in the North China Plain, and the water released from aquitard compaction may be a large portion of the exploited groundwater. In this study, the consolidation test was employed to understand the mechanics on the drainage and deformation of aquitard. The results suggested the strain of aquitard mainly resulted from the difference of hydraulic head between aquifers. And it was decreased with depth of aquitard at the same hydrodynamic pressure. In contrast with the interbed within aquifers, the aquitard was deformable when it was compressed. The weakly bound water was significantly released when the void ratio was about 0.44–0.45, and the EC of water released from the aquitard was decreased with the compacting process. The data from the consolidation test suggested that the pumping of groundwater from aquifer III might be less contribution to the land subsidence with respect to other aquifers in the future.
基金Project supported by the National Natural Science Foundation of China （Nos. 41240024, 41372285, 41272317, 51278449, and 51238009）, the Research Fund for the Doctoral Program of Higher Education of China （No. 20110073120012）, and the European Project CREEP （PIAPP-GA-2011-286397）
文摘Conventional consolidation tests on reconstituted specimens of numerous natural soft clays show a decreasing of creep index Cae with increasing soil density. Based on all selected and conducted experimental results, a modified creep index Cae＊ defined in double logarithmic plane lge-lgt, was plotted for various clays, from which Cae＊ can be assumed as a constant for different soil densities. Then, the modified creep index was applied to a newly developed elastic viscoplastic model. In this way, the modified creep index Ca＊ can naturally take into account the nonlinear Cae revealing the influence of soil density in the soil assemblies without additional parameters. Finally, the enhanced model was incorporated into the finite element code ABAQUS and used to simulate a consolidation test and a test embankment. The improvement of simulations by the modified creep index was highlighted by comparing simulations using the conventional creep index Cae.
基金Project(2011J01308) supported by the Natural Science Foundation of Fujian Province,China
文摘Isotropic consolidation test and consolidated-undrained triaxial test were first undertaken to obtain the parameters of the modified cam-clay(MCC)model and the behavior of natural clayey soil.Then,for the first time,numerical simulation of the two tests was performed by three-dimensional finite element method(FEM)using ABAQUS program.The consolidated-drained triaxial test was also simulated by FEM and compared with theoretical results of MCC model.Especially,the behaviors of MCC model during unloading and reloading were analyzed in detail by FEM.The analysis and comparison indicate that the MCC model is able to accurately describe many features of the mechanical behavior of the soil in isotropic consolidation test and consolidated-drained triaxial test.And the MCC model can well describe the variation of excess pore water pressure with the development of axial strain in consolidated-undrained triaxial test,but its ability to predict the relationship between axial strain and shear stress is relatively poor.The comparison also shows that FEM solutions of the MCC model are basically identical to the theoretical ones.In addition,Mandel-Cryer effect unable to be discovered by the conventional triaxial test in laboratories was disclosed by FEM.The analysis of unloading-reloading by FEM demonstrates that the MCC model disobeys the law of energy conservation under the cyclic loading condition if the elastic shear modulus is linearly pressure-dependent.
基金Project(42202318)supported by the National Natural Science Foundation of China。
文摘his study focused on exploring the specificity of mechanical behavior for completely weathered granite,as a special soil,by consolidated drained triaxial tests.The influences of dry density(1.60,1.70,1.80 and 1.90 g/cm^(3)),confining pressure(100,200,400 and 600 kPa),and moisture content(13.0%,that is,natural moisture content)were investigated in the present work.A newly developed Duncan-Chang model was established based on the experimental data and Duncan-Chang model.The influence of each parameter on the type of the proposed model curve was also evaluated.The experimental results revealed that with varying dry density and confining pressure,the deviatoric stress–strain curves have diversified characteristics including strain-softening,strain-stabilization and strain-hardening.Under high confining pressure condition,specimens with different densities all showed strain-hardening characteristic.Whereas at the low confining pressure levels,specimens with higher densities gradually transform into softening characteristics.Except for individual compression shear failure,the deformation modes of the specimens all showed swelling deformation,and all the damaged specimens maintained good integrity.Through comparing the experiment results,the strain-softening or strain-hardening behavior of CWG specimens could be predicted following the proposed model with high accuracy.Additionally,the proposed model can accurately characterize the key mechanical indicators,such as tangent modulus,peak value and residual strength,which is simple to implement and depends on fewer parameters.
文摘The deformation of soil skeleton and migration of pore fluid are the major factors relevant to the triggeringof and damages by liquefaction. The influence of pore fluid migration during earthquake has beendemonstrated from recent model experiments and field case studies. Most of the current liquefactionassessment models are based on testing of isotropic liquefiable materials. However the recent NewZealand earthquake shows much severer damages than those predicted by existing models. A fundamentalcause has been contributed to the embedded layers of low permeability silts. The existence ofthese silt layers inhibits water migration under seismic loads, which accelerated liquefaction and causeda much larger settlement than that predicted by existing theories. This study intends to understand theprocess of moisture migration in the pore space of sand using discrete element method （DEM） simulation.Simulations were conducted on consolidated undrained triaxial testing of sand where a cylindersample of sand was built and subjected to a constant confining pressure and axial loading. The porositydistribution was monitored during the axial loading process. The spatial distribution of porosity changewas determined, which had a direct relationship with the distribution of excess pore water pressure. Thenon-uniform distribution of excess pore water pressure causes moisture migration. From this, themigration of pore water during the loading process can be estimated. The results of DEM simulationshow a few important observations： （1） External forces are mainly carried and transmitted by the particlechains of the soil sample; （2） Porosity distribution during loading is not uniform due to nonhomogeneoussoil fabric （i.e. the initial particle arrangement and existence of particle chains）; （3）Excess pore water pressure develops differently at different loading stages. At the early stage of loading,zones with a high initial porosity feature higher porosity changes under the influence of external loading,which leads to a larger pore pressure variation （increase or decrease） in such zones. As the axial strainincreases, particle rearrangement occurs and final porosity distribution has minor relationship with theinitial condition, and the pore pressure distribution becomes irregular. The differences in the porepressure development imply that water will migrate in the pore space in order to balance the pore waterpressure distribution. The results of this simulation offer an insight on the microscale water migration inthe soil pore space, which is important for holistic description of the triggering of soil liquefaction in lightof its microstructure. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
文摘This research objective is to propose a co-valorization of powdered tuff, containing a slight amount of clay and dune sand, by mixing the two substances at different rates such as 0%, 5%, 15%, 25% and 35% of sand. The adapted criteria formulas are those recommended by the technical Saharan road. The results of the proposed study showed that ＂tuff-sand＂ mixtures are denser with a lower optimum water content modified proctor, the fine rate decreases together with the plasticity index, whereas the bearing index （CBR： California bearing ratio test） increases. The intrinsic characteristics, cohesion and sensitivity of mixtures with respect to compactness are almost identical to those oftuffwithout addition. The optimal adapted sand incorporation rate is estimated at 25% at 96% of compactness. Under these conditions, the amount of fines decreases from 40% to an acceptable level of 25% and the plasticity index from 16.2 to 12. The compaction water content decreases by 36% and the CBR （bearing index） increases by 30% and the compressive strength and sensitivity, according to compactness, of the elaborated material are almost identical to those oftuffwithout addition.
