Understanding the relationship between sediment and discharge is crucial for effective river management and water-sediment modeling,especially in the Brahmaputra River,one of the large transboundary rivers with high s...Understanding the relationship between sediment and discharge is crucial for effective river management and water-sediment modeling,especially in the Brahmaputra River,one of the large transboundary rivers with high sediment and discharge variability in South Asia.Current knowledge of sediment-water relations is constrained by limited data,hindering effective transboundary river management.Using multivariate linear regression,climate elasticity coefficient,and traditional sediment rating curve,this study is designed to compare the sediment-water relations of the upstream(Nuxia)and the downstream(Bahadurabad).The results reveal significant variability between the two stations.In the upstream Nuxia,the simulation strongly correlates with observed suspended sediment load(SSL)and discharge(Q)(Pearson's r of 0.62 and 0.68,respectively).Conversely,at downstream Bahadurabad,weaker correlations(r=0.31 for sediment and r=0.51 for discharge simulation)indicate a reduced relation.This contrast reflects the non-linear nature of sediment-discharge coupling along the river continuum,shaped by both climatic and anthropogenic influences.Elasticity(ε)analysis highlights the dominant role of precipitation in shaping sediment-water dynamics(εP-SSL=2.53,εP-Q=1.01)at Nuxia,while Bahadurabad(εP-SSL=0.41,εP-Q=0.82)reflects a reduced sensitivity,possibly due to sediment retention along the floodplain.Air temperature elasticity(εT-SSL,-0.15&-3.06 at Nuxia and Bahadurabad,respectively)reveals contrasting impacts,strongly negatively influencing sediment transport at Bahadurabad.These findings highlight the significance of spatial variability and climatic influences on sediment dynamics,underscoring the necessity for site-specific management strategies.The sediment rating curve(SRC)analysis reveals a strong relationship between sediment and discharge(R^(2)=0.88)at Nuxia and a relatively weaker relationship(R^(2)=0.14)at Bahadurabad,which demonstrates a lower sedimentdischarge coupling that could be affected by downstream factors such as sediment deposition,channel morphology,and anthropogenic activities.This study offers valuable insights into sediment-water dynamics,highlighting the importance of understanding nonlinear relationships in the Brahmaputra River.展开更多
This study was carried out to evaluate the influence of soil consistency limits and shear strength on the relative proliferation of gullies on three geological sediments, namely: the Upper Coal Measures (UCM), the Aja...This study was carried out to evaluate the influence of soil consistency limits and shear strength on the relative proliferation of gullies on three geological sediments, namely: the Upper Coal Measures (UCM), the Ajalli Sandstones (AS), and the Lower Coal Measures (LCM), which has been ranked as AS > UCM > LCM. Soil samples were collected from a depth range of 60 - 90 cm of sampling pits dug at a selected location on each of these texturally homogenous and unique formations. These were analysed for consistency limits and shear strength using standard methods and procedures. Results showed that the plasticity index (PI) of the UCM (PIUCM) was 24.49%;PIAS, 5.89%;and PILCM, 44.85%. The shear strength (S) of the UCM (SUCM) was 314.74 KN/m2;SAS, 196.23 KN/m2;and SLCM, 321.72 KN/m2. The results of the study show that rankings of the respective contributions of these two geotechnical properties to the vulnerability of the sediments to gully (soil) erosion follow the same order of proliferation of gullies on the plateau landscape: AS > UCM > LCM. Hence, consistency limits and shear strength parameters partly influence and explain the relative proliferation of gullies on the three formations. Further studies are required to determine other soil factors of gully erosion in the area in order to evolve appropriate management strategies for these sediments.展开更多
Various platelet function tests are currently used to identify responsiveness to antiplatelet therapy. 176 ACS patients were enrolled and Linear regression and Kappa consistency analysis showed there was a significant...Various platelet function tests are currently used to identify responsiveness to antiplatelet therapy. 176 ACS patients were enrolled and Linear regression and Kappa consistency analysis showed there was a significant but moderate correlation between platelet inhibition rate and a significant but fair agreement between high clopidogrel on-treatment platelet reactivity tested by light transmission aggregometry and thrombelastography.展开更多
Identifying inter-frame forgery is a hot topic in video forensics. In this paper, we propose a method based on the assumption that the correlation coefficients of gray values is consistent in an original video, while ...Identifying inter-frame forgery is a hot topic in video forensics. In this paper, we propose a method based on the assumption that the correlation coefficients of gray values is consistent in an original video, while in forgeries the consistency will be destroyed. We first extract the consistency of correlation coefficients of gray values (CCCoGV for short) after normalization and quantization as distinguishing feature to identify interframe forgeries. Then we test the CCCoGV in a large database with the help of SVM (Support Vector Machine). Experimental results show that the proposed method is efficient in classifying original videos and forgeries. Furthermore, the proposed method performs also pretty well in classifying frame insertion and frame deletion forgeries.展开更多
Intuitionistic fuzzy preference relation(IFPR) is a suitable technique to express fuzzy preference information by decision makers(DMs). This paper aims to provide a group decision making method where DMs use the IFPRs...Intuitionistic fuzzy preference relation(IFPR) is a suitable technique to express fuzzy preference information by decision makers(DMs). This paper aims to provide a group decision making method where DMs use the IFPRs to indicate their preferences with uncertain weights. To begin with, a model to derive weight vectors of alternatives from IFPRs based on multiplicative consistency is presented. Specifically, for any IFPR,by minimizing its absolute deviation from the corresponding consistent IFPR, the weight vectors are generated. Secondly,a method to determine relative weights of DMs depending on preference information is developed. After that we prioritize alternatives based on the obtained weights considering the risk preference of DMs. Finally, this approach is applied to the problem of technical risks assessment of armored equipment to illustrate the applicability and superiority of the proposed method.展开更多
Background Cotton crop is infested by numerous arthropod pests from sowing to harvesting,causing substantial direct and indirect yield losses.Knowledge of seasonal population trends and the relative occurrence of pest...Background Cotton crop is infested by numerous arthropod pests from sowing to harvesting,causing substantial direct and indirect yield losses.Knowledge of seasonal population trends and the relative occurrence of pests and their natural enemies is required to minimize the pest population and yield losses.In the current study,analysis of the seasonal population trend of pests and natural enemies and their relative occurrence on cultivars of three cotton species in Central India has been carried out.Results A higher number and diversity of sucking pests were observed during the vegetative cotton growth stage(60 days after sowing),declining as the crop matured.With the exception of cotton jassid(Amrasca biguttula biguttula Ishida),which caused significant crop damage mainly from August to September;populations of other sucking insects seldom reached economic threshold levels(ETL)throughout the studied period.The bollworm complex populations were minimal,except for the pink bollworm(Pectinophora gossypiella Saunders),which re-emerged as a menace to cotton crops during the cotton cropping season 2017–2018 due to resistance development against Bt-cotton.A reasonably good number of predatory arthropods,including coccinellids,lacewings,and spiders,were found actively preying on the arthropod pest complex of the cotton crop during the early vegetative growth stage.Linear regression indicates a significant relationship between green boll infestations and pink bollworm moths in pheromone traps.Multiple linear regression analyse showed mean weekly weather at one-or two-week lag periods had a significant impact on sucking pest population(cotton aphid,cotton jassid,cotton whitefly,and onion thrips)fluctuation.Gossypium hirsutum cultivars RCH 2 and DCH 32,and G.barbadense cultivar Suvin were found susceptible to cotton jassid and onion thrips.Phule Dhanvantary,an G.arboreum cotton cultivar,demonstrated the highest tolerance among all evaluated cultivars against all sucking pests.Conclusion These findings have important implications for pest management in cotton crops.Susceptible cultivars warrant more attention for plant protection measures,making them more input-intensive.The choice of appropriate cultivars can help minimize input costs,thereby increasing net returns for cotton farmers.展开更多
Studies on plant diversity are usually based on the total number of species in a community.However,few studies have examined species richness(SR)of different plant life forms in a community along largescale environmen...Studies on plant diversity are usually based on the total number of species in a community.However,few studies have examined species richness(SR)of different plant life forms in a community along largescale environmental gradients.Particularly,the relative importance(RIV)of different plant life forms in a community and how they vary with environmental variables are still unclear.To fill these gaps,we determined plant diversity of ephemeral plants,annual herbs,perennial herbs,and woody plants from 187 sites across drylands in China.The SR patterns of herbaceous plants,especially perennial herbs,and their RIV in plant communities increased with increasing precipitation and soil nutrient content;however,the RIV of annual herbs was not altered along these gradients.The SR and RIV of ephemeral plants were affected mainly by precipitation seasonality.The SR of woody plants had a unimodal relationship with air temperature and exhibited the highest RIV and SR percentage in plant communities under the harshest environments.An obvious shift emerged in plant community composition,SR and their critical impact factors at 238.5 mm of mean annual precipitation(MAP).In mesic regions(>238.5 mm),herbs were the dominant species,and the SR displayed a relatively slow decreasing rate with increasing aridity,which was mediated mainly by MAP and soil nutrients.In arid regions(<238.5 mm),woody plants were the dominant species,and the SR displayed a relatively fast decreasing rate with increasing aridity,which was mediated mainly by climate variables,especially precipitation.Our findings highlight the importance of comparative life form studies in community structure and biodiversity,as their responses to gradients differed substantially on a large scale.展开更多
Gas-bearing shales have become a major source of future natural gas production worldwide.It has become increasingly urgent to develop a reliable prediction model and corresponding workflow for identifying shale gas sw...Gas-bearing shales have become a major source of future natural gas production worldwide.It has become increasingly urgent to develop a reliable prediction model and corresponding workflow for identifying shale gas sweet spots.The formation of gas-bearing shales is closely linked to relative sealevel changes,providing an important approach to predicting sweet spots in the Wufeng-Longmaxi shale in the southern Sichuan Basin,China.Three types of marine shale gas sweet spots are identified in the shale based on their formation stages combined with relative sea-level changes:early,middle,and late transgression types.This study develops a prediction model and workflow for identifying shale gas sweet spots by analyzing relative sea-level changes and facies sequences.Predicting shale gas sweet spots in an explored block using this model and workflow can provide a valuable guide for well design and hydraulic fracturing,significantly enhancing the efficiency of shale gas exploration and development.Notably,the new prediction model and workflow can be utilized for the rapid evaluation of the potential for shale gas development in new shale gas blocks or those with low exploratory maturity.展开更多
Clayey-silt natural gas hydrate reservoirs in the South China Sea exhibit loose and unconsolidated structures, heterogeneous pore structures, high clay mineral contents, and strong hydrophilicity. These characteristic...Clayey-silt natural gas hydrate reservoirs in the South China Sea exhibit loose and unconsolidated structures, heterogeneous pore structures, high clay mineral contents, and strong hydrophilicity. These characteristics complicate the gas-water two-phase flow process in porous media following hydrate decomposition, posing challenges for efficient development. This study examines the transport response of clayey-silt reservoir samples from the Shenhu area using gas-water two-phase flow experiments and CT scanning to explore changes in pore structure, gas-water distribution, and relative permeability under varying flow conditions. The results indicate that pore heterogeneity significantly influences flow characteristics. Gas preferentially displaces water in larger pores, forming fracture-like pores, which serve as preferential flow channels for gas migration. The preferential flow channels enhance gas-phase permeability up to 19 times that of the water phase when fluid pressures exceed total stresses. However,small pores retain liquid, leading to a high residual water saturation of 0.561. CT imaging reveals that these hydro-fractures improve gas permeability but also confine gas flow to specific channels. Pore network analysis shows that gas injection expands the pore-throat network, enhancing connectivity and forming fracture-like pores. Residual water remains trapped in smaller pores and throats, while structural changes, including new fractures, improve gas flow pathways and overall connectivity. Relative permeability curves demonstrate a narrow gas-water cocurrent-flow zone, a right-shifted iso-permeability point and high reservoir capillary pressure, indicating a strong "water-blocking" effect. The findings suggest that optimizing reservoir stimulation techniques to enhance fracture formation, reduce residual water saturation, and improve gas flow capacity is critical for efficient hydrate reservoir development.展开更多
Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hyd...Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.展开更多
Magnesium and magnesium alloys,serving as crucial lightweight structural materials and hydrogen storage elements,find extensive applications in space technology,aviation,automotive,and magnesium-based hydrogen industr...Magnesium and magnesium alloys,serving as crucial lightweight structural materials and hydrogen storage elements,find extensive applications in space technology,aviation,automotive,and magnesium-based hydrogen industries.The global production of primary magnesium has reached approximately 1.2 million tons per year,with anticipated diversification in future applications and significant market demand.Nevertheless,approximately 80%of the world’s primary magnesium is still manufactured through the Pidgeon process,grappling with formidable issues including high energy consumption,massive carbon emission,significant resource depletion,and environmental pollution.The implementation of the relative vacuum method shows potential in breaking through technological challenges in the Pidgeon process,facilitating clean,low-carbon continuous magnesium smelting.This paper begins by introducing the principles of the relative vacuum method.Subsequently,it elucidates various innovative process routes,including relative vacuum ferrosilicon reduction,aluminum thermal reduction co-production of spinel,and aluminum thermal reduction co-production of calcium aluminate.Finally,and thermodynamic foundations of the relative vacuum,a quantitative analysis of the material,energy flows,carbon emission,and production cost for several new processes is conducted,comparing and analyzing them against the Pidgeon process.The study findings reveal that,with identical raw materials,the relative vacuum silicon thermal reduction process significantly decreases raw material consumption,energy consumption,and carbon dioxide emissions by 15.86%,30.89%,and 26.27%,respectively,compared to the Pidgeon process.The relative vacuum process,using magnesite as the raw material and aluminum as the reducing agent,has the lowest magnesium-to-feed ratio,at only 3.385.Additionally,its energy consumption and carbon dioxide emissions are the lowest,at 1.817 tce/t Mg and 7.782 t CO_(2)/t Mg,respectively.The energy consumption and carbon emissions of the relative vacuum magnesium smelting process co-producing calcium aluminate(12CaO·7Al_(2)O_(3),3CaO·Al_(2)O_(3),and CaO·Al_(2)O_(3))are highly correlated with the consumption of dolomite in the raw materials.When the reduction temperature is around 1473.15 K,the critical volume fraction of magnesium vapor for different processes varies within the range of 5%–40%.Production cost analysis shows that the relative vacuum primary magnesium smelting process has significant economic benefits.This paper offers essential data support and theoretical guidance for achieving energy efficiency,carbon reduction in magnesium smelting,and the industrial adoption of innovative processes.展开更多
In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this stu...In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.展开更多
Objective It has long been reported that prolactinomas treated with bromocriptine increase fibrosis and may affect surgical outcomes.We retrospectively studied 238 consecutive patients with histopathologically confirm...Objective It has long been reported that prolactinomas treated with bromocriptine increase fibrosis and may affect surgical outcomes.We retrospectively studied 238 consecutive patients with histopathologically confirmed prolactinomas undergoing microsurgery in a single neurosurgery department of Tongji Hospital(Wuhan,China) from 2012 to 2015 in order to evaluate tumor consistency changes after bromocriptine pretreatment and surgical outcomes.Methods We divided the patients into four groups;males in the dopamine agonist(DA) group,females in the DA group,males in the no DA group,and females in the no DA group,and we compared the surgery process,specimen Masson staining,and clinical outcomes of the four groups.According to a previously published classification,the operative notes from an experienced neurosurgeon were reviewed to classify the consistency of tumors as "fibrous" or "nonfibrous".Results No differences in tumor consistency were found in male patients with or without DA treatment.However,in female patients with DA treatment,tumors were likely to be harder in texture than the tumors of female patients without DA treatment.Despite tumor consistency differences between sexes,the tumor biological remission rate was similar between groups,as was the rate of tumor resection.Discussion Our study indicates that preoperative DA therapy impacts tumor consistency in female patients but not male patients.Although the surgical and histopathological outcomes are not influenced,these findings may provide useful information for the choice of operative approach and surgery process for pituitary adenoma.展开更多
To explore the effects of relative humidity(RH)on the quality of walnut kernels and establish a rapid,effective method/model for identifying their deterioration degree,walnut kernels were stored at 45℃for 90 days und...To explore the effects of relative humidity(RH)on the quality of walnut kernels and establish a rapid,effective method/model for identifying their deterioration degree,walnut kernels were stored at 45℃for 90 days under different RH conditions(35%,50%,65%and 80%)in this study.Every 15 days,changes in the kernels'color,acid values(AV),peroxide values(POV),fatty acid composition,contents of total phenols and soluble quinones,synchronous fluorescence spectra,and the compositions/contents of volatile organic compounds(VOCs)were analyzed.Partial least squares discriminant analysis(PLS-DA)and variable importance in projection(VIP)were used to conduct differential analysis of VOCs.The deterioration degree of walnut kernels was predicted using Pearson correlation analysis and a Back Propagation Neural Network(BPNN)model.The results showed that RH had a significant effect on the quality of walnut kernels,with 65%RH being the suitable storage condition for them.According to gas chromatography-mass spectrometry(GC-MS)analysis,a total of 40,34,23 and 17 characteristic VOCs were identified in the walnut kernels stored at RH of 35%,50%,65%and 80%,respectively.Among these VOCs,hexanal,1-octen-3-ol,4,5-dimethyltetrahydrofuran-2-one and DL-pantolactone were identified as potential volatile deterioration markers(PVDMs).Based on the POV limit standard of 1.0 mmol/kg for walnut oil,the threshold concentrations of these four PVDMs were 500-1000,50-100,10-15,and 30-60μg/100g,respectively.This research provides a reference for the quality monitoring and evaluation of walnut kernels during storage.展开更多
Data from rain Drop Size Distributions gathered on five sites in Africa as well as those of the pilot site in Kourou (French Guyana, South America), located in different climatic zones, and collected by two types of d...Data from rain Drop Size Distributions gathered on five sites in Africa as well as those of the pilot site in Kourou (French Guyana, South America), located in different climatic zones, and collected by two types of disdrometer (the impact JW RD-69 disdrometer and the Optical Spectro-Pluviometer, OSP) are used to study the consistency of the reflectivity factor-rain rate at the ground (Z-R) relationship variability. The results clearly confirm that the relationship Z-R knows a large spatial variability, from a type of precipitation to another and within the same precipitation regardless the type of disdrometer used for DSD measurements. Base on the similarity of the relations reflectivity factor-rain rate and ratio median volume diameter over the total number of drops-rain rate, the variability of the Z-R coefficients (A, b) through the simultaneously implication of the size and number of drops which characterize the DSD was exhibited. It was shown that the relationships A-α and b-β designed to understand the involvement of parameters D0 and NT of DSD in the variability of the relationship Z-R are similar regardless the types of disdrometer used. However, the relations A-α in the Sahelian region appear to deviate from those of Guinean, equatorial and Soudanian zones. The plausible reasons were discussed.展开更多
Based on irreversible thermodynamics, the criterion for judging the satisfaction of consistency conditions in rate-dependent constitutive relationship is deduced by introducing four basic hypotheses. Formulas for solv...Based on irreversible thermodynamics, the criterion for judging the satisfaction of consistency conditions in rate-dependent constitutive relationship is deduced by introducing four basic hypotheses. Formulas for solving internal variables are given. It makes the rate-dependent model applicable no matter whether the consistency conditions can be satisfied or not.展开更多
Facial expression datasets commonly exhibit imbalances between various categories or between difficult and simple samples.This imbalance introduces bias into feature extraction within facial expression recognition(FER...Facial expression datasets commonly exhibit imbalances between various categories or between difficult and simple samples.This imbalance introduces bias into feature extraction within facial expression recognition(FER)models,which hinders the algorithm’s comprehension of emotional states and reduces the overall recognition accuracy.A novel FER model is introduced to address these issues.It integrates rebalancing mechanisms to regulate attention consistency and focus,offering enhanced efficacy.Our approach proposes the following improvements:(i)rebalancing weights are used to enhance the consistency between the heatmaps of an original face sample and its horizontally flipped counterpart;(ii)coefficient factors are incorporated into the standard cross entropy loss function,and rebalancing weights are incorporated to fine-tune the loss adjustment.Experimental results indicate that the FER model outperforms the current leading algorithm,MEK,achieving 0.69%and 2.01%increases in overall and average recognition accuracies,respectively,on the RAF-DB dataset.The model exhibits accuracy improvements of 0.49%and 1.01%in the AffectNet dataset and 0.83%and 1.23%in the FERPlus dataset,respectively.These outcomes validate the superiority and stability of the proposed FER model.展开更多
Background:To investigate the consistency level of binary symptom assessment in patients with heart failure and their primary caregivers,and to analyze the related factors influencing consistency.Methods:By using the ...Background:To investigate the consistency level of binary symptom assessment in patients with heart failure and their primary caregivers,and to analyze the related factors influencing consistency.Methods:By using the convenience sampling method,patients with heart failure and their main caregivers in the Department of Cardiology of a tertiary hospital in Suzhou from May to November 2023 were selected as the research subjects.The HFSS scale was used for data collection.The paired t-test or paired Wilcoxon test was used to evaluate the differences in the binary symptom assessment scores of heart failure.The intraclass correlation coefficient was used to assess the consistency level of the binary symptom assessment.The Pearson correlation test was used to examine the correlation of the binary symptom assessment.Regression analysis was employed to explore the factors related to the consistency assessment.Results:A total of 103 pairs of valid questionnaires were collected.The consistency levels of symptom evaluations in patients with heart failure and their primary caregivers were statistically significant(P<0.05).The most frequently reported and severe symptom by patients with heart failure and their primary caregivers is shortness of breath during activity.Both have a high consensus on the severity and urgency of most heart failure symptoms.The patient’s gender,body mass index,number of children,history of diabetes,number of comorbidities,mean arterial pressure,LVEF,number of stents,whether a defibrillator was implanted,as well as the gender,marital status,education level,relationship with the patient,care time,whether they lived together,and communication and interaction situation of the main caregiver were the influencing factors for the consistency of binary symptom assessment of heart failure(P<0.05).Conclusion:The degree of consistency in binary symptom assessment between patients with heart failure and their primary caregivers was moderate or higher,which emphasizes the importance of including binary groups in clinical assessment.展开更多
Passerine mimics often imitate various vocalizations from other bird species and incorporate these sounds into their song repertoires.While a few anecdotes reported that wild songbirds imitated human-associated sounds...Passerine mimics often imitate various vocalizations from other bird species and incorporate these sounds into their song repertoires.While a few anecdotes reported that wild songbirds imitated human-associated sounds,besides captive parrots and songbirds,systemic and quantitative studies on human-made sound mimicry in wild birds remain scarce.In this study,we investigated the mimetic accuracy and consistency of electric moped sounds imitated by an urban bird,the Chinese Blackbird(Turdus mandarinus).We found that:(1)Only one type of electric moped sound was imitated,i.e.,13 of 26 males mimicked the first part of the antitheft alarm,a phrase containing a series of identical notes.(2)The mimicry produced by male Chinese Blackbirds had fewer notes and lower consistency within phrases compared to the model alarms.(3)The mimicry of male Chinese Blackbirds was imperfect,i.e.,most of the acoustic parameters differed from the model alarms.Additionally,mimetic notes were lower in frequency than the models.Mimetic notes from two areas were also different in acoustic structures,suggesting Chinese Blackbirds might learn mimicry mainly from conspecific neighbors within each area respectively rather than electric mopeds,namely the secondary mimicry.Imperfect mimicry of human-made sounds could result from cost and physical constraints,associated with high consistency,frequency,and repetitions.Consequently,Chinese Blackbirds copied a simplified version of electric moped alarms.We recommend further attention to mimic species inhabiting urban ecosystems to better understand vocal mimicry's adaptation to ongoing urbanization.展开更多
基金jointly supported by the Second Tibetan Plateau Scientific Expedition and Research Program(Grant No.2019QZKK0902)National Natural Science Foundation of China(NSFC)project(Grant No.42305178)+1 种基金the Key R&D Program of Tibet Autonomous Region(Grant No.XZ202301ZY0039G)the Science and Technology Research Program of Institute of Mountain Hazards and Environment,Chinese Academy of Sciences(Grant No.IMHEZDRW-01)。
文摘Understanding the relationship between sediment and discharge is crucial for effective river management and water-sediment modeling,especially in the Brahmaputra River,one of the large transboundary rivers with high sediment and discharge variability in South Asia.Current knowledge of sediment-water relations is constrained by limited data,hindering effective transboundary river management.Using multivariate linear regression,climate elasticity coefficient,and traditional sediment rating curve,this study is designed to compare the sediment-water relations of the upstream(Nuxia)and the downstream(Bahadurabad).The results reveal significant variability between the two stations.In the upstream Nuxia,the simulation strongly correlates with observed suspended sediment load(SSL)and discharge(Q)(Pearson's r of 0.62 and 0.68,respectively).Conversely,at downstream Bahadurabad,weaker correlations(r=0.31 for sediment and r=0.51 for discharge simulation)indicate a reduced relation.This contrast reflects the non-linear nature of sediment-discharge coupling along the river continuum,shaped by both climatic and anthropogenic influences.Elasticity(ε)analysis highlights the dominant role of precipitation in shaping sediment-water dynamics(εP-SSL=2.53,εP-Q=1.01)at Nuxia,while Bahadurabad(εP-SSL=0.41,εP-Q=0.82)reflects a reduced sensitivity,possibly due to sediment retention along the floodplain.Air temperature elasticity(εT-SSL,-0.15&-3.06 at Nuxia and Bahadurabad,respectively)reveals contrasting impacts,strongly negatively influencing sediment transport at Bahadurabad.These findings highlight the significance of spatial variability and climatic influences on sediment dynamics,underscoring the necessity for site-specific management strategies.The sediment rating curve(SRC)analysis reveals a strong relationship between sediment and discharge(R^(2)=0.88)at Nuxia and a relatively weaker relationship(R^(2)=0.14)at Bahadurabad,which demonstrates a lower sedimentdischarge coupling that could be affected by downstream factors such as sediment deposition,channel morphology,and anthropogenic activities.This study offers valuable insights into sediment-water dynamics,highlighting the importance of understanding nonlinear relationships in the Brahmaputra River.
文摘This study was carried out to evaluate the influence of soil consistency limits and shear strength on the relative proliferation of gullies on three geological sediments, namely: the Upper Coal Measures (UCM), the Ajalli Sandstones (AS), and the Lower Coal Measures (LCM), which has been ranked as AS > UCM > LCM. Soil samples were collected from a depth range of 60 - 90 cm of sampling pits dug at a selected location on each of these texturally homogenous and unique formations. These were analysed for consistency limits and shear strength using standard methods and procedures. Results showed that the plasticity index (PI) of the UCM (PIUCM) was 24.49%;PIAS, 5.89%;and PILCM, 44.85%. The shear strength (S) of the UCM (SUCM) was 314.74 KN/m2;SAS, 196.23 KN/m2;and SLCM, 321.72 KN/m2. The results of the study show that rankings of the respective contributions of these two geotechnical properties to the vulnerability of the sediments to gully (soil) erosion follow the same order of proliferation of gullies on the plateau landscape: AS > UCM > LCM. Hence, consistency limits and shear strength parameters partly influence and explain the relative proliferation of gullies on the three formations. Further studies are required to determine other soil factors of gully erosion in the area in order to evolve appropriate management strategies for these sediments.
基金Beijing Higher Education Young Elite Teacher Project(Grant No.YETP0064)from Beijing Municipal Education Commission
文摘Various platelet function tests are currently used to identify responsiveness to antiplatelet therapy. 176 ACS patients were enrolled and Linear regression and Kappa consistency analysis showed there was a significant but moderate correlation between platelet inhibition rate and a significant but fair agreement between high clopidogrel on-treatment platelet reactivity tested by light transmission aggregometry and thrombelastography.
文摘Identifying inter-frame forgery is a hot topic in video forensics. In this paper, we propose a method based on the assumption that the correlation coefficients of gray values is consistent in an original video, while in forgeries the consistency will be destroyed. We first extract the consistency of correlation coefficients of gray values (CCCoGV for short) after normalization and quantization as distinguishing feature to identify interframe forgeries. Then we test the CCCoGV in a large database with the help of SVM (Support Vector Machine). Experimental results show that the proposed method is efficient in classifying original videos and forgeries. Furthermore, the proposed method performs also pretty well in classifying frame insertion and frame deletion forgeries.
基金partly supported by the National Natural Science Foundation of China(71371053)the Social Science Foundation of Fujian Province(FJ2015C111)
文摘Intuitionistic fuzzy preference relation(IFPR) is a suitable technique to express fuzzy preference information by decision makers(DMs). This paper aims to provide a group decision making method where DMs use the IFPRs to indicate their preferences with uncertain weights. To begin with, a model to derive weight vectors of alternatives from IFPRs based on multiplicative consistency is presented. Specifically, for any IFPR,by minimizing its absolute deviation from the corresponding consistent IFPR, the weight vectors are generated. Secondly,a method to determine relative weights of DMs depending on preference information is developed. After that we prioritize alternatives based on the obtained weights considering the risk preference of DMs. Finally, this approach is applied to the problem of technical risks assessment of armored equipment to illustrate the applicability and superiority of the proposed method.
基金Funding support for the Crop Pest Surveillance and Advisory Project(CROPSAP)。
文摘Background Cotton crop is infested by numerous arthropod pests from sowing to harvesting,causing substantial direct and indirect yield losses.Knowledge of seasonal population trends and the relative occurrence of pests and their natural enemies is required to minimize the pest population and yield losses.In the current study,analysis of the seasonal population trend of pests and natural enemies and their relative occurrence on cultivars of three cotton species in Central India has been carried out.Results A higher number and diversity of sucking pests were observed during the vegetative cotton growth stage(60 days after sowing),declining as the crop matured.With the exception of cotton jassid(Amrasca biguttula biguttula Ishida),which caused significant crop damage mainly from August to September;populations of other sucking insects seldom reached economic threshold levels(ETL)throughout the studied period.The bollworm complex populations were minimal,except for the pink bollworm(Pectinophora gossypiella Saunders),which re-emerged as a menace to cotton crops during the cotton cropping season 2017–2018 due to resistance development against Bt-cotton.A reasonably good number of predatory arthropods,including coccinellids,lacewings,and spiders,were found actively preying on the arthropod pest complex of the cotton crop during the early vegetative growth stage.Linear regression indicates a significant relationship between green boll infestations and pink bollworm moths in pheromone traps.Multiple linear regression analyse showed mean weekly weather at one-or two-week lag periods had a significant impact on sucking pest population(cotton aphid,cotton jassid,cotton whitefly,and onion thrips)fluctuation.Gossypium hirsutum cultivars RCH 2 and DCH 32,and G.barbadense cultivar Suvin were found susceptible to cotton jassid and onion thrips.Phule Dhanvantary,an G.arboreum cotton cultivar,demonstrated the highest tolerance among all evaluated cultivars against all sucking pests.Conclusion These findings have important implications for pest management in cotton crops.Susceptible cultivars warrant more attention for plant protection measures,making them more input-intensive.The choice of appropriate cultivars can help minimize input costs,thereby increasing net returns for cotton farmers.
基金supported by the National Key Research and Development Program of China(2023YFF0805602)National Natural Science Foundation of China(32225032,32001192,32271597)+1 种基金the Innovation Base Project of Gansu Province(2021YFF0703904)the Science and Technology Program of Gansu Province(24JRRA515,22JR5RA525,23JRRA1157).
文摘Studies on plant diversity are usually based on the total number of species in a community.However,few studies have examined species richness(SR)of different plant life forms in a community along largescale environmental gradients.Particularly,the relative importance(RIV)of different plant life forms in a community and how they vary with environmental variables are still unclear.To fill these gaps,we determined plant diversity of ephemeral plants,annual herbs,perennial herbs,and woody plants from 187 sites across drylands in China.The SR patterns of herbaceous plants,especially perennial herbs,and their RIV in plant communities increased with increasing precipitation and soil nutrient content;however,the RIV of annual herbs was not altered along these gradients.The SR and RIV of ephemeral plants were affected mainly by precipitation seasonality.The SR of woody plants had a unimodal relationship with air temperature and exhibited the highest RIV and SR percentage in plant communities under the harshest environments.An obvious shift emerged in plant community composition,SR and their critical impact factors at 238.5 mm of mean annual precipitation(MAP).In mesic regions(>238.5 mm),herbs were the dominant species,and the SR displayed a relatively slow decreasing rate with increasing aridity,which was mediated mainly by MAP and soil nutrients.In arid regions(<238.5 mm),woody plants were the dominant species,and the SR displayed a relatively fast decreasing rate with increasing aridity,which was mediated mainly by climate variables,especially precipitation.Our findings highlight the importance of comparative life form studies in community structure and biodiversity,as their responses to gradients differed substantially on a large scale.
文摘Gas-bearing shales have become a major source of future natural gas production worldwide.It has become increasingly urgent to develop a reliable prediction model and corresponding workflow for identifying shale gas sweet spots.The formation of gas-bearing shales is closely linked to relative sealevel changes,providing an important approach to predicting sweet spots in the Wufeng-Longmaxi shale in the southern Sichuan Basin,China.Three types of marine shale gas sweet spots are identified in the shale based on their formation stages combined with relative sea-level changes:early,middle,and late transgression types.This study develops a prediction model and workflow for identifying shale gas sweet spots by analyzing relative sea-level changes and facies sequences.Predicting shale gas sweet spots in an explored block using this model and workflow can provide a valuable guide for well design and hydraulic fracturing,significantly enhancing the efficiency of shale gas exploration and development.Notably,the new prediction model and workflow can be utilized for the rapid evaluation of the potential for shale gas development in new shale gas blocks or those with low exploratory maturity.
基金the National Natural Science Foundation of China (Nos. 42302143, 42172159)China Geological Survey Project (No. DD20211350)support from the G. Albert Shoemaker endowment
文摘Clayey-silt natural gas hydrate reservoirs in the South China Sea exhibit loose and unconsolidated structures, heterogeneous pore structures, high clay mineral contents, and strong hydrophilicity. These characteristics complicate the gas-water two-phase flow process in porous media following hydrate decomposition, posing challenges for efficient development. This study examines the transport response of clayey-silt reservoir samples from the Shenhu area using gas-water two-phase flow experiments and CT scanning to explore changes in pore structure, gas-water distribution, and relative permeability under varying flow conditions. The results indicate that pore heterogeneity significantly influences flow characteristics. Gas preferentially displaces water in larger pores, forming fracture-like pores, which serve as preferential flow channels for gas migration. The preferential flow channels enhance gas-phase permeability up to 19 times that of the water phase when fluid pressures exceed total stresses. However,small pores retain liquid, leading to a high residual water saturation of 0.561. CT imaging reveals that these hydro-fractures improve gas permeability but also confine gas flow to specific channels. Pore network analysis shows that gas injection expands the pore-throat network, enhancing connectivity and forming fracture-like pores. Residual water remains trapped in smaller pores and throats, while structural changes, including new fractures, improve gas flow pathways and overall connectivity. Relative permeability curves demonstrate a narrow gas-water cocurrent-flow zone, a right-shifted iso-permeability point and high reservoir capillary pressure, indicating a strong "water-blocking" effect. The findings suggest that optimizing reservoir stimulation techniques to enhance fracture formation, reduce residual water saturation, and improve gas flow capacity is critical for efficient hydrate reservoir development.
基金Australian Research Council Linkage Program(LP200301404)for sponsoring this researchthe financial support provided by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology,SKLGP2021K002)National Natural Science Foundation of China(52374101,32111530138).
文摘Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.
基金supported by the China Postdoctoral Science Foundation(No.2023T160088)the Youth Fund of the National Natural Science Foundation of China(No.52304324).
文摘Magnesium and magnesium alloys,serving as crucial lightweight structural materials and hydrogen storage elements,find extensive applications in space technology,aviation,automotive,and magnesium-based hydrogen industries.The global production of primary magnesium has reached approximately 1.2 million tons per year,with anticipated diversification in future applications and significant market demand.Nevertheless,approximately 80%of the world’s primary magnesium is still manufactured through the Pidgeon process,grappling with formidable issues including high energy consumption,massive carbon emission,significant resource depletion,and environmental pollution.The implementation of the relative vacuum method shows potential in breaking through technological challenges in the Pidgeon process,facilitating clean,low-carbon continuous magnesium smelting.This paper begins by introducing the principles of the relative vacuum method.Subsequently,it elucidates various innovative process routes,including relative vacuum ferrosilicon reduction,aluminum thermal reduction co-production of spinel,and aluminum thermal reduction co-production of calcium aluminate.Finally,and thermodynamic foundations of the relative vacuum,a quantitative analysis of the material,energy flows,carbon emission,and production cost for several new processes is conducted,comparing and analyzing them against the Pidgeon process.The study findings reveal that,with identical raw materials,the relative vacuum silicon thermal reduction process significantly decreases raw material consumption,energy consumption,and carbon dioxide emissions by 15.86%,30.89%,and 26.27%,respectively,compared to the Pidgeon process.The relative vacuum process,using magnesite as the raw material and aluminum as the reducing agent,has the lowest magnesium-to-feed ratio,at only 3.385.Additionally,its energy consumption and carbon dioxide emissions are the lowest,at 1.817 tce/t Mg and 7.782 t CO_(2)/t Mg,respectively.The energy consumption and carbon emissions of the relative vacuum magnesium smelting process co-producing calcium aluminate(12CaO·7Al_(2)O_(3),3CaO·Al_(2)O_(3),and CaO·Al_(2)O_(3))are highly correlated with the consumption of dolomite in the raw materials.When the reduction temperature is around 1473.15 K,the critical volume fraction of magnesium vapor for different processes varies within the range of 5%–40%.Production cost analysis shows that the relative vacuum primary magnesium smelting process has significant economic benefits.This paper offers essential data support and theoretical guidance for achieving energy efficiency,carbon reduction in magnesium smelting,and the industrial adoption of innovative processes.
文摘In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.
基金Supported by a grant from the National Natural Sciences Foundation of China(No.81270865)
文摘Objective It has long been reported that prolactinomas treated with bromocriptine increase fibrosis and may affect surgical outcomes.We retrospectively studied 238 consecutive patients with histopathologically confirmed prolactinomas undergoing microsurgery in a single neurosurgery department of Tongji Hospital(Wuhan,China) from 2012 to 2015 in order to evaluate tumor consistency changes after bromocriptine pretreatment and surgical outcomes.Methods We divided the patients into four groups;males in the dopamine agonist(DA) group,females in the DA group,males in the no DA group,and females in the no DA group,and we compared the surgery process,specimen Masson staining,and clinical outcomes of the four groups.According to a previously published classification,the operative notes from an experienced neurosurgeon were reviewed to classify the consistency of tumors as "fibrous" or "nonfibrous".Results No differences in tumor consistency were found in male patients with or without DA treatment.However,in female patients with DA treatment,tumors were likely to be harder in texture than the tumors of female patients without DA treatment.Despite tumor consistency differences between sexes,the tumor biological remission rate was similar between groups,as was the rate of tumor resection.Discussion Our study indicates that preoperative DA therapy impacts tumor consistency in female patients but not male patients.Although the surgical and histopathological outcomes are not influenced,these findings may provide useful information for the choice of operative approach and surgery process for pituitary adenoma.
基金Anhui Province Scientific and Technological Research Project(202423110050025)National Key Research and Development Project(2023YFD2100400)。
文摘To explore the effects of relative humidity(RH)on the quality of walnut kernels and establish a rapid,effective method/model for identifying their deterioration degree,walnut kernels were stored at 45℃for 90 days under different RH conditions(35%,50%,65%and 80%)in this study.Every 15 days,changes in the kernels'color,acid values(AV),peroxide values(POV),fatty acid composition,contents of total phenols and soluble quinones,synchronous fluorescence spectra,and the compositions/contents of volatile organic compounds(VOCs)were analyzed.Partial least squares discriminant analysis(PLS-DA)and variable importance in projection(VIP)were used to conduct differential analysis of VOCs.The deterioration degree of walnut kernels was predicted using Pearson correlation analysis and a Back Propagation Neural Network(BPNN)model.The results showed that RH had a significant effect on the quality of walnut kernels,with 65%RH being the suitable storage condition for them.According to gas chromatography-mass spectrometry(GC-MS)analysis,a total of 40,34,23 and 17 characteristic VOCs were identified in the walnut kernels stored at RH of 35%,50%,65%and 80%,respectively.Among these VOCs,hexanal,1-octen-3-ol,4,5-dimethyltetrahydrofuran-2-one and DL-pantolactone were identified as potential volatile deterioration markers(PVDMs).Based on the POV limit standard of 1.0 mmol/kg for walnut oil,the threshold concentrations of these four PVDMs were 500-1000,50-100,10-15,and 30-60μg/100g,respectively.This research provides a reference for the quality monitoring and evaluation of walnut kernels during storage.
文摘Data from rain Drop Size Distributions gathered on five sites in Africa as well as those of the pilot site in Kourou (French Guyana, South America), located in different climatic zones, and collected by two types of disdrometer (the impact JW RD-69 disdrometer and the Optical Spectro-Pluviometer, OSP) are used to study the consistency of the reflectivity factor-rain rate at the ground (Z-R) relationship variability. The results clearly confirm that the relationship Z-R knows a large spatial variability, from a type of precipitation to another and within the same precipitation regardless the type of disdrometer used for DSD measurements. Base on the similarity of the relations reflectivity factor-rain rate and ratio median volume diameter over the total number of drops-rain rate, the variability of the Z-R coefficients (A, b) through the simultaneously implication of the size and number of drops which characterize the DSD was exhibited. It was shown that the relationships A-α and b-β designed to understand the involvement of parameters D0 and NT of DSD in the variability of the relationship Z-R are similar regardless the types of disdrometer used. However, the relations A-α in the Sahelian region appear to deviate from those of Guinean, equatorial and Soudanian zones. The plausible reasons were discussed.
基金the National Natural Science Foundation of China(No.59739180)the Foundation of National Key Laboratory of Coastal and Offshore Engineering of Dalian University of Technology(No.9701)
文摘Based on irreversible thermodynamics, the criterion for judging the satisfaction of consistency conditions in rate-dependent constitutive relationship is deduced by introducing four basic hypotheses. Formulas for solving internal variables are given. It makes the rate-dependent model applicable no matter whether the consistency conditions can be satisfied or not.
基金support from the National Natural Science Foundation of China(Grant Number 62477023).
文摘Facial expression datasets commonly exhibit imbalances between various categories or between difficult and simple samples.This imbalance introduces bias into feature extraction within facial expression recognition(FER)models,which hinders the algorithm’s comprehension of emotional states and reduces the overall recognition accuracy.A novel FER model is introduced to address these issues.It integrates rebalancing mechanisms to regulate attention consistency and focus,offering enhanced efficacy.Our approach proposes the following improvements:(i)rebalancing weights are used to enhance the consistency between the heatmaps of an original face sample and its horizontally flipped counterpart;(ii)coefficient factors are incorporated into the standard cross entropy loss function,and rebalancing weights are incorporated to fine-tune the loss adjustment.Experimental results indicate that the FER model outperforms the current leading algorithm,MEK,achieving 0.69%and 2.01%increases in overall and average recognition accuracies,respectively,on the RAF-DB dataset.The model exhibits accuracy improvements of 0.49%and 1.01%in the AffectNet dataset and 0.83%and 1.23%in the FERPlus dataset,respectively.These outcomes validate the superiority and stability of the proposed FER model.
文摘Background:To investigate the consistency level of binary symptom assessment in patients with heart failure and their primary caregivers,and to analyze the related factors influencing consistency.Methods:By using the convenience sampling method,patients with heart failure and their main caregivers in the Department of Cardiology of a tertiary hospital in Suzhou from May to November 2023 were selected as the research subjects.The HFSS scale was used for data collection.The paired t-test or paired Wilcoxon test was used to evaluate the differences in the binary symptom assessment scores of heart failure.The intraclass correlation coefficient was used to assess the consistency level of the binary symptom assessment.The Pearson correlation test was used to examine the correlation of the binary symptom assessment.Regression analysis was employed to explore the factors related to the consistency assessment.Results:A total of 103 pairs of valid questionnaires were collected.The consistency levels of symptom evaluations in patients with heart failure and their primary caregivers were statistically significant(P<0.05).The most frequently reported and severe symptom by patients with heart failure and their primary caregivers is shortness of breath during activity.Both have a high consensus on the severity and urgency of most heart failure symptoms.The patient’s gender,body mass index,number of children,history of diabetes,number of comorbidities,mean arterial pressure,LVEF,number of stents,whether a defibrillator was implanted,as well as the gender,marital status,education level,relationship with the patient,care time,whether they lived together,and communication and interaction situation of the main caregiver were the influencing factors for the consistency of binary symptom assessment of heart failure(P<0.05).Conclusion:The degree of consistency in binary symptom assessment between patients with heart failure and their primary caregivers was moderate or higher,which emphasizes the importance of including binary groups in clinical assessment.
基金supported by the National Key Research and Development Program of China(2022YFC3202104)the Western LightKey Laboratory Cooperative Research Cross-Team Project of Chinese Academy of Sciences(xbzg-zdsys-202207)。
文摘Passerine mimics often imitate various vocalizations from other bird species and incorporate these sounds into their song repertoires.While a few anecdotes reported that wild songbirds imitated human-associated sounds,besides captive parrots and songbirds,systemic and quantitative studies on human-made sound mimicry in wild birds remain scarce.In this study,we investigated the mimetic accuracy and consistency of electric moped sounds imitated by an urban bird,the Chinese Blackbird(Turdus mandarinus).We found that:(1)Only one type of electric moped sound was imitated,i.e.,13 of 26 males mimicked the first part of the antitheft alarm,a phrase containing a series of identical notes.(2)The mimicry produced by male Chinese Blackbirds had fewer notes and lower consistency within phrases compared to the model alarms.(3)The mimicry of male Chinese Blackbirds was imperfect,i.e.,most of the acoustic parameters differed from the model alarms.Additionally,mimetic notes were lower in frequency than the models.Mimetic notes from two areas were also different in acoustic structures,suggesting Chinese Blackbirds might learn mimicry mainly from conspecific neighbors within each area respectively rather than electric mopeds,namely the secondary mimicry.Imperfect mimicry of human-made sounds could result from cost and physical constraints,associated with high consistency,frequency,and repetitions.Consequently,Chinese Blackbirds copied a simplified version of electric moped alarms.We recommend further attention to mimic species inhabiting urban ecosystems to better understand vocal mimicry's adaptation to ongoing urbanization.
