Seismic wavelet estimation is an important part of seismic data processing and interpretation, whose preciseness is directly related to the results of deconvolution and inversion. Wavelet estimation based on higher-or...Seismic wavelet estimation is an important part of seismic data processing and interpretation, whose preciseness is directly related to the results of deconvolution and inversion. Wavelet estimation based on higher-order spectra is an important new method. However, the higher-order spectra often have phase wrapping problems, which lead to wavelet phase spectrum deviations and thereby affect mixed-phase wavelet estimation. To solve this problem, we propose a new phase spectral method based on conformal mapping in the bispectral domain. The method avoids the phase wrapping problems by narrowing the scope of the Fourier phase spectrum to eliminate the bispectral phase wrapping influence in the original phase spectral estimation. The method constitutes least-squares wavelet phase spectrum estimation based on conformal mapping which is applied to mixed-phase wavelet estimation with the least-squares wavelet amplitude spectrum estimation. Theoretical model and actual seismic data verify the validity of this method. We also extend the idea of conformal mapping in the bispectral wavelet phase spectrum estimation to trispectral wavelet phase spectrum estimation.展开更多
In this paper, the authors present an analytical model for coplanar waveguide on silicon-on-insulator substrate. The four-element topological network and the conformal mapping technique are used to analyse the capacit...In this paper, the authors present an analytical model for coplanar waveguide on silicon-on-insulator substrate. The four-element topological network and the conformal mapping technique are used to analyse the capacitance and the conductance of the sandwich substrate. The validity of the model is verified by the full-wave method and the experimental data. It is found that the inductance, the resistance, the capacitance and the conductance from the analytical model show they are in good agreement with the corresponding values extracted from experimental Sparameter until 10 GHz.展开更多
The transformation method to control waves has received widespread attention in electromagnetism and acoustics. However, this machinery is not directly applicable to the control of elastic waves, because it has been s...The transformation method to control waves has received widespread attention in electromagnetism and acoustics. However, this machinery is not directly applicable to the control of elastic waves, because it has been shown that the Navier＇s equation does not usually retain its form under coordinate transformation. In this letter, we prove the form invariance of the Navier＇s equation under the conformal mapping based on the Helmholtz decomposition method. The needed material parameters are provided to manipulate elastic waves. The validity of this approach is confirmed by an active stealth device which can disguise the signal source by changing its position. Experimental verifications and potential applications may be expected in nondestructive testing, structural seismic design and other fields.展开更多
Instead of the conventional design with five contacts in the sensor active area, innovative vertical Hall devices （VHDs） with four contacts and six contacts are asymmetrical in structural design but symmetrical in t...Instead of the conventional design with five contacts in the sensor active area, innovative vertical Hall devices （VHDs） with four contacts and six contacts are asymmetrical in structural design but symmetrical in the current flow that can be well fit for the spinning current technique for offset elimination. In this article, a conformal mapping calculation method is used to predict the performance of asymmetrical VHD embedded in a deep n-well with four contacts. Furthermore, to make the calculation more accurate, the junction field effect is also involved into the conformal mapping method. The error between calculated and simulated results is less than 5% for the currentrelated sensitivity, and approximately 13% for the voltage-related sensitivity. This proves that such calculations can be used to predict the optimal structure of the vertical Hall-devices.展开更多
This paper proposes a novel technique for modeling the electrostatic discharge （ESD） characteristic of the enclosed-gate layout transistors （ELTs）. The model consists of an ELT, a parasitic bipolar transistor, and...This paper proposes a novel technique for modeling the electrostatic discharge （ESD） characteristic of the enclosed-gate layout transistors （ELTs）. The model consists of an ELT, a parasitic bipolar transistor, and a substrate resistor. The ELF is decomposed into edge and comer transistors by solving the electrostatic field problem through the conformal mapping method, and these transistors are separately modeled by BSIM （Berkeley Short- channel IGFET Model）. Fast simulation speed and easy implementation is obtained as the model can be incorporated into standard SPICE simulation. The model parameters are extracted from the critical point of the snapback curve, and simulation results are presented and compared to experimental data for verification.展开更多
We present the design of two interacting harmonic non-elliptical compressible liquid inclusions embedded in an infinite isotropic elastic matrix subjected to uniform remote in-plane stresses.The original constant mean...We present the design of two interacting harmonic non-elliptical compressible liquid inclusions embedded in an infinite isotropic elastic matrix subjected to uniform remote in-plane stresses.The original constant mean stress(or the first invariant of the stress tensor)in the matrix remains undisturbed in the presence of the two harmonic liquid inclusions.The two non-elliptical liquid-solid interfaces are described by a fourparameter conformal mapping function that maps the doubly connected domain occupied by the matrix onto an annulus in the image plane.The closed-form expressions for the internal uniform hydrostatic stress fields within the two liquid inclusions are obtained.The hoop stresses are uniformly distributed along the two liquid-solid interfaces on the matrix side.展开更多
Aimed at calculating the fundamental frequency of vibration of special-shaped, simple-supported elastic plates, Conformal Mapping theory is applied, and the mathematical method of trigonometric interpolation with inte...Aimed at calculating the fundamental frequency of vibration of special-shaped, simple-supported elastic plates, Conformal Mapping theory is applied, and the mathematical method of trigonometric interpolation with interpolation points mutual iterative between odd and even sequences in boundary region is provided, as well as the conformal mapping function which can be described by real number region between complicated region and unit dish region is carried out. Furthermore, in the in-plane state of constant stress, vibrating function is completed by unit dish region method for simple-supported elastic plates with concentrated substance of complicated vibrating region, and the coefficient of fundamental frequency of the plate is analyzed. Meanwhile, taking simple-supported elastic ellipse-plates as an example, the effects on fundamental frequency caused by eccentric ratio, the coefficient of constant in-plane stress, as well as the concentrated substance mass and positions are analyzed respectively.展开更多
By conformal mapping theory, a trigonometric interpolation method between odd and even sequences in rectangle boundary region was provided, and the conformal mapping function of rectangle-plate with arc radius between...By conformal mapping theory, a trigonometric interpolation method between odd and even sequences in rectangle boundary region was provided, and the conformal mapping function of rectangle-plate with arc radius between complicated region and unite dish region was carried out. Aiming at calculating the vibrating fundamental frequency of special-shaped, elastic simple-supported rectangle-plates, in the in-plane state of constant stress, the vibration function of this complicated plate was depicted by unit dish region. The coefficient of ftmdamental frequency was calculated. Whilst, taking simple-supported elastic rectangle-plates with arc radius as an example, the effects on fundamental frequency caused by the concentrated mass and position, the ratio of the length to width of rectangle, as well as the coefficient of constant in-plane stress were analyzed respectively.展开更多
This study aims to investigate the feasibility of deriving in situ horizontal stresses from the breakout width and depth using the analytical method.Twenty-three breakout data with different borehole sizes were collec...This study aims to investigate the feasibility of deriving in situ horizontal stresses from the breakout width and depth using the analytical method.Twenty-three breakout data with different borehole sizes were collected and three failure criteria were studied.Based on the Kirsch equations,relatively accurate major horizontal stress(sH)estimations from known minor horizontal stress(sh)were achieved with percentage errors ranging from 0.33%to 44.08%using the breakout width.The Mogi-Coulomb failure criterion(average error:13.1%)outperformed modified Wiebols-Cook(average error:19.09%)and modified Lade(average error:18.09%)failure criteria.However,none of the tested constitutive models could yield reasonable sh predictions from known sH using the same approach due to the analytical expression of the redistributed stress and the nature of the constitutive models.In consideration of this issue,the horizontal stress ratio(sH/sh)is suggested as an alternative input,which could estimate both sH and sh with the same level of accuracy.Moreover,the estimation accuracies for both large-scale and laboratory-scale breakouts are comparable,suggesting the applicability of this approach across different breakout sizes.For breakout depth,conformal mapping and complex variable method were used to calculate the stress concentration around the breakout tip,allowing the expression of redistributed stresses using binomials composed of sH and sh.Nevertheless,analysis of the breakout depth stabilisation mechanism indicates that additional parameters are required to utilise normalised breakout depth for stress estimation compared to breakout width.These parameters are challenging to obtain,especially under field conditions,meaning utilising normalised breakout depth analytically in practical applications faces significant challenges and remains infeasible at this stage.Nonetheless,the normalised breakout depth should still be considered a critical input for any empirical and statistical stress estimation method given its significant correlation with horizontal stresses.The outcome of this paper is expected to contribute valuable insights into the breakout stabilisation mechanisms and estimation of in situ stress magnitudes based on borehole breakout geometries.展开更多
Nowadays,there is considerable research interest in proposing modern permanent magnet(PM)electric machine structures for applications such as electric vehicles.Several radial and axial topologies with different arrang...Nowadays,there is considerable research interest in proposing modern permanent magnet(PM)electric machine structures for applications such as electric vehicles.Several radial and axial topologies with different arrangements of PM in the stator and rotor have been introduced for PM Vernier motors(PMVM)with the aim of increasing the performance characteristics such as power factor,efficiency,rotational torque torque density and wider constant torque-speed region.Meanwhile,the spoke PM arrangement has provided higher torque density than the surface and V-shaped arrangement.But in contrast,the V-shaped arrangement has a more sinusoidal flux and less cogging torque.In this paper,a 620 W,12-slot 16-pole Vernier PM motor with a fractional slot arrangement.Consequent K-shaped pole is introduced,which has the advantages of spoke and V-shaped magnetic arrangements.After presenting and confirming the concept of the proposed structure based on functional comparison with conventional structures,an analytical modeling based on the harmonic analysis method is introduced to accurately predict the performance of the machine,and finally the proposed structure is prototyped and the experimental results are simulated and modeling are compared.展开更多
In this paper,by using the tools of second order smooth module,we discusses the conformal mapping from a unit circle onto a simply connected domain enclosed by a smooth Jordan curve L ,and further improves the Kellog...In this paper,by using the tools of second order smooth module,we discusses the conformal mapping from a unit circle onto a simply connected domain enclosed by a smooth Jordan curve L ,and further improves the Kellogg theorem.展开更多
By constructing a new numerical conformal mapping and using the Stroh-type formulism, an anti-plane problem of four edge cracks emanating from a square hole in piezoelectric solids is investigated. The explicit expres...By constructing a new numerical conformal mapping and using the Stroh-type formulism, an anti-plane problem of four edge cracks emanating from a square hole in piezoelectric solids is investigated. The explicit expressions of the complex potential function, field intensity factors, energy release rates and mechanical strain energy release rate near the crack tip are obtained under the assumptions that the surfaces of the cracks and hole are electrically permeable and electrically impermeable. Numerical examples are presented to show the influences of the geometrical parameters of defects and applied mechanical/electrical loads on the energy release rate and mechanical strain energy release rate under two electrical boundary conditions.展开更多
Based on the complex variable method, the analytical solutions of stress functions and stress intensity factors（SIFs） are provided for the plane problem of two collinear edge cracks emanating from an elliptical hole...Based on the complex variable method, the analytical solutions of stress functions and stress intensity factors（SIFs） are provided for the plane problem of two collinear edge cracks emanating from an elliptical hole in an infinite plate under shear. The stress distribution along the horizontal axis is given in graphical forms, which conforms to Saint-Venant＇s principle. The influences of crack length and ellipse shape on the stress intensity factors are evaluated. Comparing the analytical solutions with finite element method（FEM） results shows good coincidence. These numerical examples show that the present solutions are accurate.展开更多
The present study is to determine the solution of a strip with a semi-infinite crack embedded in decagonal quasicrystals,which transforms a physically and mathematically daunting problem.Then cohesive forces are incor...The present study is to determine the solution of a strip with a semi-infinite crack embedded in decagonal quasicrystals,which transforms a physically and mathematically daunting problem.Then cohesive forces are incorporated into a plastic strip in the elastic body for nonlinear deformation.By superposing the two linear elastic fields,one is evaluated with internal loadings and the other with cohesive forces,the problem is treated in Dugdale-Barenblatt manner.A simple but yet rigorous version of the complex analysis theory is employed here,which involves a conformal mapping technique.The analytical approach leads to the establishment of a few equations,which allows the exact calculation of the size of cohesive force zone and the most important physical quantity in crack theory：stress intensity factor.The analytical results of the present study may be used as the basis of fracture theory of decagonal quasicrystals.展开更多
The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A confo...The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A conformal mapping is proposed and combined with the complex variable method. Due to some difficulties in the calculation of the stress function, the mapping function is approximated and simplified via the applications of the series expansion. To validate the obtained solution, several examples are analyzed with the proposed method, the finite element method, etc. In addition, the effects of the lengths of the cracks and the ratio of the semi-axes of the elliptical hole(a/b) on the SIFs are studied. The results show that the present analytical solution is applicable to the SIFs for small cracks.展开更多
The interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional(1 D) hexagonal quasicrystal with piezoelectric effect is considered. A general formula of the genera...The interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional(1 D) hexagonal quasicrystal with piezoelectric effect is considered. A general formula of the generalized stress field, the field intensity factor, and the image force is derived, and the special cases are discussed. Several numerical examples are given to show the effects of the material properties and the dislocation position on the field intensity factors and the image forces.展开更多
The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to...The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.展开更多
This investigation presents the Green functions for a decagonal quasicrystalline ma- terial with a parabolic boundary subject to a line force and a line dislocation by means of the complex variable method. The surface...This investigation presents the Green functions for a decagonal quasicrystalline ma- terial with a parabolic boundary subject to a line force and a line dislocation by means of the complex variable method. The surface Green functions are treated as a special case, and the explicit expressions of displacements and hoop stress at the parabolic boundary are also given. Finally, the stresses and displacements induced by a phonon line force acting at the origin of the lower half-space are presented.展开更多
In this paper, we investigate the well-known problem of a finite width strip with a single edge crack, which is useful in basic engineering and material science. By extending the configuration to a two-dimensional dec...In this paper, we investigate the well-known problem of a finite width strip with a single edge crack, which is useful in basic engineering and material science. By extending the configuration to a two-dimensional decagonal quasicrystal, we obtain the analytic solutions of modesⅠand Ⅱ using the transcendental function conformal mapping technique. Our calculation results provide an accurate estimate of the stress intensity factors K_Ⅰ and K_Ⅱ, which can be expressed in a quite simple form and are essential in the fracture theory of quasicrystals. Meanwhile, we suggest a generalized cohesive force model for the configuration to a two-dimensional decagonal quasicrystal. The results may provide theoretical guidance for the fracture theory of two-dimensional decagonal quasicrystals.展开更多
基金supported by National 973 Program (No. 2007CB209600)
文摘Seismic wavelet estimation is an important part of seismic data processing and interpretation, whose preciseness is directly related to the results of deconvolution and inversion. Wavelet estimation based on higher-order spectra is an important new method. However, the higher-order spectra often have phase wrapping problems, which lead to wavelet phase spectrum deviations and thereby affect mixed-phase wavelet estimation. To solve this problem, we propose a new phase spectral method based on conformal mapping in the bispectral domain. The method avoids the phase wrapping problems by narrowing the scope of the Fourier phase spectrum to eliminate the bispectral phase wrapping influence in the original phase spectral estimation. The method constitutes least-squares wavelet phase spectrum estimation based on conformal mapping which is applied to mixed-phase wavelet estimation with the least-squares wavelet amplitude spectrum estimation. Theoretical model and actual seismic data verify the validity of this method. We also extend the idea of conformal mapping in the bispectral wavelet phase spectrum estimation to trispectral wavelet phase spectrum estimation.
基金Project supported by the National Natural Science Foundation of China(Grant No.10775166)the Zhejiang Provincial Science Technology Foundation,China(Grant No.2008C31002)
文摘In this paper, the authors present an analytical model for coplanar waveguide on silicon-on-insulator substrate. The four-element topological network and the conformal mapping technique are used to analyse the capacitance and the conductance of the sandwich substrate. The validity of the model is verified by the full-wave method and the experimental data. It is found that the inductance, the resistance, the capacitance and the conductance from the analytical model show they are in good agreement with the corresponding values extracted from experimental Sparameter until 10 GHz.
基金supported by the National Natural Science Foundation of China (90916007 and 91116008)
文摘The transformation method to control waves has received widespread attention in electromagnetism and acoustics. However, this machinery is not directly applicable to the control of elastic waves, because it has been shown that the Navier＇s equation does not usually retain its form under coordinate transformation. In this letter, we prove the form invariance of the Navier＇s equation under the conformal mapping based on the Helmholtz decomposition method. The needed material parameters are provided to manipulate elastic waves. The validity of this approach is confirmed by an active stealth device which can disguise the signal source by changing its position. Experimental verifications and potential applications may be expected in nondestructive testing, structural seismic design and other fields.
基金supported by the Natural Science Foundation of Jiangsu Province,China(Nos.BK20131379,BK20141431)the Graduate Research and Innovation Projects of Jiangsu Province(No.SJLX_0373)
文摘Instead of the conventional design with five contacts in the sensor active area, innovative vertical Hall devices （VHDs） with four contacts and six contacts are asymmetrical in structural design but symmetrical in the current flow that can be well fit for the spinning current technique for offset elimination. In this article, a conformal mapping calculation method is used to predict the performance of asymmetrical VHD embedded in a deep n-well with four contacts. Furthermore, to make the calculation more accurate, the junction field effect is also involved into the conformal mapping method. The error between calculated and simulated results is less than 5% for the currentrelated sensitivity, and approximately 13% for the voltage-related sensitivity. This proves that such calculations can be used to predict the optimal structure of the vertical Hall-devices.
基金Project supported by the National Natural Science Foundation of China(No.61271149)the CAS/SAFEA International Partnership Program for Creative Research Teams
文摘This paper proposes a novel technique for modeling the electrostatic discharge （ESD） characteristic of the enclosed-gate layout transistors （ELTs）. The model consists of an ELT, a parasitic bipolar transistor, and a substrate resistor. The ELF is decomposed into edge and comer transistors by solving the electrostatic field problem through the conformal mapping method, and these transistors are separately modeled by BSIM （Berkeley Short- channel IGFET Model）. Fast simulation speed and easy implementation is obtained as the model can be incorporated into standard SPICE simulation. The model parameters are extracted from the critical point of the snapback curve, and simulation results are presented and compared to experimental data for verification.
基金supported by the Natural Sciences and Engineering Research Council of Canada(No.RGPIN-2023-03227 Schiavo)。
文摘We present the design of two interacting harmonic non-elliptical compressible liquid inclusions embedded in an infinite isotropic elastic matrix subjected to uniform remote in-plane stresses.The original constant mean stress(or the first invariant of the stress tensor)in the matrix remains undisturbed in the presence of the two harmonic liquid inclusions.The two non-elliptical liquid-solid interfaces are described by a fourparameter conformal mapping function that maps the doubly connected domain occupied by the matrix onto an annulus in the image plane.The closed-form expressions for the internal uniform hydrostatic stress fields within the two liquid inclusions are obtained.The hoop stresses are uniformly distributed along the two liquid-solid interfaces on the matrix side.
文摘Aimed at calculating the fundamental frequency of vibration of special-shaped, simple-supported elastic plates, Conformal Mapping theory is applied, and the mathematical method of trigonometric interpolation with interpolation points mutual iterative between odd and even sequences in boundary region is provided, as well as the conformal mapping function which can be described by real number region between complicated region and unit dish region is carried out. Furthermore, in the in-plane state of constant stress, vibrating function is completed by unit dish region method for simple-supported elastic plates with concentrated substance of complicated vibrating region, and the coefficient of fundamental frequency of the plate is analyzed. Meanwhile, taking simple-supported elastic ellipse-plates as an example, the effects on fundamental frequency caused by eccentric ratio, the coefficient of constant in-plane stress, as well as the concentrated substance mass and positions are analyzed respectively.
基金Supported by the National Natural Science Foundation of China(Nos.11172197,11332008 and 11572215)the Natural Science Foundation of Tianjin through a key-project Grant(12JCZDJC30400)the UC MEXUS-CONACy T through the project Hybridizing Set Oriented Methods and Evolutionary Strategies to Obtain Fast and Reliable Multi-objective Optimization Algorithms
文摘By conformal mapping theory, a trigonometric interpolation method between odd and even sequences in rectangle boundary region was provided, and the conformal mapping function of rectangle-plate with arc radius between complicated region and unite dish region was carried out. Aiming at calculating the vibrating fundamental frequency of special-shaped, elastic simple-supported rectangle-plates, in the in-plane state of constant stress, the vibration function of this complicated plate was depicted by unit dish region. The coefficient of ftmdamental frequency was calculated. Whilst, taking simple-supported elastic rectangle-plates with arc radius as an example, the effects on fundamental frequency caused by the concentrated mass and position, the ratio of the length to width of rectangle, as well as the coefficient of constant in-plane stress were analyzed respectively.
基金funded by the Australian Coal Industry’s Research Program(ACARP,Grant No.C26063).
文摘This study aims to investigate the feasibility of deriving in situ horizontal stresses from the breakout width and depth using the analytical method.Twenty-three breakout data with different borehole sizes were collected and three failure criteria were studied.Based on the Kirsch equations,relatively accurate major horizontal stress(sH)estimations from known minor horizontal stress(sh)were achieved with percentage errors ranging from 0.33%to 44.08%using the breakout width.The Mogi-Coulomb failure criterion(average error:13.1%)outperformed modified Wiebols-Cook(average error:19.09%)and modified Lade(average error:18.09%)failure criteria.However,none of the tested constitutive models could yield reasonable sh predictions from known sH using the same approach due to the analytical expression of the redistributed stress and the nature of the constitutive models.In consideration of this issue,the horizontal stress ratio(sH/sh)is suggested as an alternative input,which could estimate both sH and sh with the same level of accuracy.Moreover,the estimation accuracies for both large-scale and laboratory-scale breakouts are comparable,suggesting the applicability of this approach across different breakout sizes.For breakout depth,conformal mapping and complex variable method were used to calculate the stress concentration around the breakout tip,allowing the expression of redistributed stresses using binomials composed of sH and sh.Nevertheless,analysis of the breakout depth stabilisation mechanism indicates that additional parameters are required to utilise normalised breakout depth for stress estimation compared to breakout width.These parameters are challenging to obtain,especially under field conditions,meaning utilising normalised breakout depth analytically in practical applications faces significant challenges and remains infeasible at this stage.Nonetheless,the normalised breakout depth should still be considered a critical input for any empirical and statistical stress estimation method given its significant correlation with horizontal stresses.The outcome of this paper is expected to contribute valuable insights into the breakout stabilisation mechanisms and estimation of in situ stress magnitudes based on borehole breakout geometries.
文摘Nowadays,there is considerable research interest in proposing modern permanent magnet(PM)electric machine structures for applications such as electric vehicles.Several radial and axial topologies with different arrangements of PM in the stator and rotor have been introduced for PM Vernier motors(PMVM)with the aim of increasing the performance characteristics such as power factor,efficiency,rotational torque torque density and wider constant torque-speed region.Meanwhile,the spoke PM arrangement has provided higher torque density than the surface and V-shaped arrangement.But in contrast,the V-shaped arrangement has a more sinusoidal flux and less cogging torque.In this paper,a 620 W,12-slot 16-pole Vernier PM motor with a fractional slot arrangement.Consequent K-shaped pole is introduced,which has the advantages of spoke and V-shaped magnetic arrangements.After presenting and confirming the concept of the proposed structure based on functional comparison with conventional structures,an analytical modeling based on the harmonic analysis method is introduced to accurately predict the performance of the machine,and finally the proposed structure is prototyped and the experimental results are simulated and modeling are compared.
文摘In this paper,by using the tools of second order smooth module,we discusses the conformal mapping from a unit circle onto a simply connected domain enclosed by a smooth Jordan curve L ,and further improves the Kellogg theorem.
基金supported by the National Natural Science Foundation of China (Nos. 11262012, 11502123, 11462020 and 11262017)the Inner Mongolia Natural Science Foundation (Nos. 2015JQ01 and 2015MS0129) of China
文摘By constructing a new numerical conformal mapping and using the Stroh-type formulism, an anti-plane problem of four edge cracks emanating from a square hole in piezoelectric solids is investigated. The explicit expressions of the complex potential function, field intensity factors, energy release rates and mechanical strain energy release rate near the crack tip are obtained under the assumptions that the surfaces of the cracks and hole are electrically permeable and electrically impermeable. Numerical examples are presented to show the influences of the geometrical parameters of defects and applied mechanical/electrical loads on the energy release rate and mechanical strain energy release rate under two electrical boundary conditions.
基金co-supported by Hebei Provincial Natural Science Foundation of China(No.A2011210033)Foundation of Hebei Education Department of China(No.ZH2011116)
文摘Based on the complex variable method, the analytical solutions of stress functions and stress intensity factors（SIFs） are provided for the plane problem of two collinear edge cracks emanating from an elliptical hole in an infinite plate under shear. The stress distribution along the horizontal axis is given in graphical forms, which conforms to Saint-Venant＇s principle. The influences of crack length and ellipse shape on the stress intensity factors are evaluated. Comparing the analytical solutions with finite element method（FEM） results shows good coincidence. These numerical examples show that the present solutions are accurate.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10972035)
文摘The present study is to determine the solution of a strip with a semi-infinite crack embedded in decagonal quasicrystals,which transforms a physically and mathematically daunting problem.Then cohesive forces are incorporated into a plastic strip in the elastic body for nonlinear deformation.By superposing the two linear elastic fields,one is evaluated with internal loadings and the other with cohesive forces,the problem is treated in Dugdale-Barenblatt manner.A simple but yet rigorous version of the complex analysis theory is employed here,which involves a conformal mapping technique.The analytical approach leads to the establishment of a few equations,which allows the exact calculation of the size of cohesive force zone and the most important physical quantity in crack theory：stress intensity factor.The analytical results of the present study may be used as the basis of fracture theory of decagonal quasicrystals.
文摘The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A conformal mapping is proposed and combined with the complex variable method. Due to some difficulties in the calculation of the stress function, the mapping function is approximated and simplified via the applications of the series expansion. To validate the obtained solution, several examples are analyzed with the proposed method, the finite element method, etc. In addition, the effects of the lengths of the cracks and the ratio of the semi-axes of the elliptical hole(a/b) on the SIFs are studied. The results show that the present analytical solution is applicable to the SIFs for small cracks.
基金Project supported by the National Natural Science Foundation of China(Nos.11962026,11462020,11862021,and 11502123)the Inner Mongolia Natural Science Foundation of China(Nos.2017MS0104 and NJZY18022)。
文摘The interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional(1 D) hexagonal quasicrystal with piezoelectric effect is considered. A general formula of the generalized stress field, the field intensity factor, and the image force is derived, and the special cases are discussed. Several numerical examples are given to show the effects of the material properties and the dislocation position on the field intensity factors and the image forces.
基金supported by National Natural Science Foundation of China(No.50675209)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education of China(No.200724).
文摘The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.
文摘This investigation presents the Green functions for a decagonal quasicrystalline ma- terial with a parabolic boundary subject to a line force and a line dislocation by means of the complex variable method. The surface Green functions are treated as a special case, and the explicit expressions of displacements and hoop stress at the parabolic boundary are also given. Finally, the stresses and displacements induced by a phonon line force acting at the origin of the lower half-space are presented.
基金supported by the National Natural Science Foundation of China(Grant No.10802043)
文摘In this paper, we investigate the well-known problem of a finite width strip with a single edge crack, which is useful in basic engineering and material science. By extending the configuration to a two-dimensional decagonal quasicrystal, we obtain the analytic solutions of modesⅠand Ⅱ using the transcendental function conformal mapping technique. Our calculation results provide an accurate estimate of the stress intensity factors K_Ⅰ and K_Ⅱ, which can be expressed in a quite simple form and are essential in the fracture theory of quasicrystals. Meanwhile, we suggest a generalized cohesive force model for the configuration to a two-dimensional decagonal quasicrystal. The results may provide theoretical guidance for the fracture theory of two-dimensional decagonal quasicrystals.
