This paper presents a study on the concur- rent topology optimization of a structure and its material microstructure. A modified optimization model is proposed by introducing microstructure orientation angles as a new...This paper presents a study on the concur- rent topology optimization of a structure and its material microstructure. A modified optimization model is proposed by introducing microstructure orientation angles as a new type of design variable. The new model is based on the assumptions that a structure is made of a material with the same microstructure, and the material may have a different orientation within the design domain of the structure. The homogenization theory is applied to link the material and structure scales. An additional post-processing technique is developed for modifying the obtained design to avoid local optima caused by the use of orientation angle variables. Numerical examples are presented to illustrate the viabil- ity and effectiveness of the proposed model. It is found that significant improvement in structural performance can be achieved by optimizing the orientation of microstructures in concurrent topology optimization of structures and materials.展开更多
To avoid the high computational cost and much modification in the process of applying traditional reliability-based design optimization method, a new reliability-based concurrent subspace optimization approach is prop...To avoid the high computational cost and much modification in the process of applying traditional reliability-based design optimization method, a new reliability-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and reliability assessment methods. It is shown through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.展开更多
Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization ...Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.展开更多
The specific good properties of cellular materials and composite materials, such as low density and high permeability, make the optimal design of such materials necessary and at- tractive. However, the given materials...The specific good properties of cellular materials and composite materials, such as low density and high permeability, make the optimal design of such materials necessary and at- tractive. However, the given materials for the structures may not be optimal or suitable, since the boundary condition and applied loads vary in practical applications; hence the macro-structure and its material micro-structure should be considered simultaneously. Although abundant studies have been reported on the structural and material optimization at each level, very few of them considered the mutual coordination on both scales. In this paper, two FE models are built for the macro-structure and the micro-structure, respectively; and the effective elastic properties of the periodic micro-structure are blended into the analysis of macro-structure by the homogenization theory. Here, a topological optimum is obtained by gradually re-distributing the constituents within the micro-structure and updating the topological shape at the macro-structure until converges are achieved on both scales. The mutual coordination between the roles of micro-scale and macro-scale is considered. Some numerical examples are presented, which illustrate that the proposed optimization algorithm is effective and highly efficient for the micro-structure design and macro-structure optimization. For the composite design, one can see reasonable effects of the stiffness of base materials on the resultant topologies.展开更多
Reconfigurable products and manufacturing systems have enabled manufacturers to provide ＂cost effective＂ variety to the market. In spite of these new technologies, the expense of manufacturing makes it infeasible to...Reconfigurable products and manufacturing systems have enabled manufacturers to provide ＂cost effective＂ variety to the market. In spite of these new technologies, the expense of manufacturing makes it infeasible to supply all the possible variants to the market for some industries. Therefore, the determination of the right number of product variantsto offer in the product portfolios becomes an important consideration. The product portfolio planning problem had been independently well studied from marketing and engineering perspectives. However, advantages can be gained from using a concurrent marketing and engineering approach. Concurrent product development strategies specifically for reconfigurable products and manufacturing systems can allow manufacturers to select best product portfolios from marketing, product design and manufacturing perspectives. A methodology for the concurrent design of a product portfolio and assembly system is presented. The objective of the concurrent product portfolio planning and assembly system design problem is to obtain the product variants that will make up the product portfolio such that oversupply of optional modules is minimized and the assembly line efficiency is maximized. Explicit design of the assembly system is obtained during the solution of the problem. It is assumed that the demand for optional modules and the assembly times for these modules are known a priori. A genetic algorithm is used in the solution of the problem. The basic premise of this methodology is that the selected product portfolio has a significant impact on the solution of the assembly line balancing problem. An example is used to validate this hypothesis. The example is then further developed to demonstrate how the methodology can be used to obtain the optimal product portfolio. This approach is intended for use by manufacturers during the early design stages of product family design.展开更多
Metadata prefetching and data placement play a critical role in enhancing access performance for file systems operating over wide-area networks.However,developing effective strategies for metadata prefetching in envir...Metadata prefetching and data placement play a critical role in enhancing access performance for file systems operating over wide-area networks.However,developing effective strategies for metadata prefetching in environments with concurrent workloads and for data placement across distributed networks remains a significant challenge.This study introduces novel and efficient methodologies for metadata prefetching and data placement,leveraging fine-grained control of prefetching strategies and variable-sized data fragment writing to optimize the I/O bandwidth of distributed file systems.The proposed metadata prefetching technique employs dynamic workload analysis to identify dominant workload patterns and adaptively refines prefetching policies,thereby boosting metadata access efficiency under concurrent scenarios.Meanwhile,the data placement strategy improves write performance by storing data fragments locally within the nearest data center and transmitting only the fragment location metadata to the remote data center hosting the original file.Experimental evaluations using real-world system traces demonstrate that the proposed approaches reduce metadata access times by up to 33.5%and application data access times by 17.19%compared to state-of-the-art techniques.展开更多
As sensor networks are increasingly being deployed, there will be more sensors available in the same region, making it strategic to select the suitable ones to execute users＇ applications. We propose a task execution...As sensor networks are increasingly being deployed, there will be more sensors available in the same region, making it strategic to select the suitable ones to execute users＇ applications. We propose a task execution framework, named sTaskAlloc, to execute application energy efficiently by two main parts. First, considering that the energy consumption of an application is inversely proportional to the utilization rate of sensors, we present a hot sensor selection algorithm, HotTasking, to minimize the energy consumption of new added applications by selecting the most suitable sensor. Second, when a sensor is shared by multiple applications, proposed MergeOPT （a concurrent tasks optimization algorithm） is used to optimize energy consumption further by eliminating redundant sampling tasks. Experimental results show that sTaskAlloc can save more than 76% of energy for new added applications compared with existing methods and reduce up to 72% of sampling tasks when a sensor is shared by more than 10 applications.展开更多
基金supported by the State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, China (Grant GZ1305)
文摘This paper presents a study on the concur- rent topology optimization of a structure and its material microstructure. A modified optimization model is proposed by introducing microstructure orientation angles as a new type of design variable. The new model is based on the assumptions that a structure is made of a material with the same microstructure, and the material may have a different orientation within the design domain of the structure. The homogenization theory is applied to link the material and structure scales. An additional post-processing technique is developed for modifying the obtained design to avoid local optima caused by the use of orientation angle variables. Numerical examples are presented to illustrate the viabil- ity and effectiveness of the proposed model. It is found that significant improvement in structural performance can be achieved by optimizing the orientation of microstructures in concurrent topology optimization of structures and materials.
基金the Nationa Natural Science Foundation of China (Grant No. 10377015)
文摘To avoid the high computational cost and much modification in the process of applying traditional reliability-based design optimization method, a new reliability-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and reliability assessment methods. It is shown through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.
基金National Natural Science Foundation of China (10377015)
文摘Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.
基金supported by the Science Funds from Educational Commission of Yunnan Province,China(No.2016zzx005)
文摘The specific good properties of cellular materials and composite materials, such as low density and high permeability, make the optimal design of such materials necessary and at- tractive. However, the given materials for the structures may not be optimal or suitable, since the boundary condition and applied loads vary in practical applications; hence the macro-structure and its material micro-structure should be considered simultaneously. Although abundant studies have been reported on the structural and material optimization at each level, very few of them considered the mutual coordination on both scales. In this paper, two FE models are built for the macro-structure and the micro-structure, respectively; and the effective elastic properties of the periodic micro-structure are blended into the analysis of macro-structure by the homogenization theory. Here, a topological optimum is obtained by gradually re-distributing the constituents within the micro-structure and updating the topological shape at the macro-structure until converges are achieved on both scales. The mutual coordination between the roles of micro-scale and macro-scale is considered. Some numerical examples are presented, which illustrate that the proposed optimization algorithm is effective and highly efficient for the micro-structure design and macro-structure optimization. For the composite design, one can see reasonable effects of the stiffness of base materials on the resultant topologies.
文摘Reconfigurable products and manufacturing systems have enabled manufacturers to provide ＂cost effective＂ variety to the market. In spite of these new technologies, the expense of manufacturing makes it infeasible to supply all the possible variants to the market for some industries. Therefore, the determination of the right number of product variantsto offer in the product portfolios becomes an important consideration. The product portfolio planning problem had been independently well studied from marketing and engineering perspectives. However, advantages can be gained from using a concurrent marketing and engineering approach. Concurrent product development strategies specifically for reconfigurable products and manufacturing systems can allow manufacturers to select best product portfolios from marketing, product design and manufacturing perspectives. A methodology for the concurrent design of a product portfolio and assembly system is presented. The objective of the concurrent product portfolio planning and assembly system design problem is to obtain the product variants that will make up the product portfolio such that oversupply of optional modules is minimized and the assembly line efficiency is maximized. Explicit design of the assembly system is obtained during the solution of the problem. It is assumed that the demand for optional modules and the assembly times for these modules are known a priori. A genetic algorithm is used in the solution of the problem. The basic premise of this methodology is that the selected product portfolio has a significant impact on the solution of the assembly line balancing problem. An example is used to validate this hypothesis. The example is then further developed to demonstrate how the methodology can be used to obtain the optimal product portfolio. This approach is intended for use by manufacturers during the early design stages of product family design.
基金funded by the National Natural Science Foundation of China under Grant No.62362019the Hainan Provincial Natural Science Foundation of China under Grant No.624RC482.
文摘Metadata prefetching and data placement play a critical role in enhancing access performance for file systems operating over wide-area networks.However,developing effective strategies for metadata prefetching in environments with concurrent workloads and for data placement across distributed networks remains a significant challenge.This study introduces novel and efficient methodologies for metadata prefetching and data placement,leveraging fine-grained control of prefetching strategies and variable-sized data fragment writing to optimize the I/O bandwidth of distributed file systems.The proposed metadata prefetching technique employs dynamic workload analysis to identify dominant workload patterns and adaptively refines prefetching policies,thereby boosting metadata access efficiency under concurrent scenarios.Meanwhile,the data placement strategy improves write performance by storing data fragments locally within the nearest data center and transmitting only the fragment location metadata to the remote data center hosting the original file.Experimental evaluations using real-world system traces demonstrate that the proposed approaches reduce metadata access times by up to 33.5%and application data access times by 17.19%compared to state-of-the-art techniques.
基金supported in part by the Strategic Priority Research Program of the Chinese Academy of Sciences under GrantNo.XDA06010403the International Science and Technology Cooperation Program of China under Grant No.2013DFA10690+1 种基金the ational Natural Science Foundation of China under Grant No.61003293the Beijing Natural Science Foundation under GrantNo.4112054
文摘As sensor networks are increasingly being deployed, there will be more sensors available in the same region, making it strategic to select the suitable ones to execute users＇ applications. We propose a task execution framework, named sTaskAlloc, to execute application energy efficiently by two main parts. First, considering that the energy consumption of an application is inversely proportional to the utilization rate of sensors, we present a hot sensor selection algorithm, HotTasking, to minimize the energy consumption of new added applications by selecting the most suitable sensor. Second, when a sensor is shared by multiple applications, proposed MergeOPT （a concurrent tasks optimization algorithm） is used to optimize energy consumption further by eliminating redundant sampling tasks. Experimental results show that sTaskAlloc can save more than 76% of energy for new added applications compared with existing methods and reduce up to 72% of sampling tasks when a sensor is shared by more than 10 applications.
