Based on the computer integrated and flexible laser p rocessing system, we developed an intelligent measuring sub-system. A novel mod el has been built to compensate the deviations of the main frame-structure, and a l...Based on the computer integrated and flexible laser p rocessing system, we developed an intelligent measuring sub-system. A novel mod el has been built to compensate the deviations of the main frame-structure, and a laser tracker system is applied to calibrate the accuracy of the system. Anal yzing the characteristics of all kind surfaces of automobile outer penal moulds and dies, the surface and border to be measured and processed are classified int o four types. A 2-D adaptive measuring method based on Bzier curve and a 3 -D adaptive measuring method based on Spline curve are developed for different types of surface. During the data processing, a 3-D probe compensation method i s described in details. The control software of the sub-measuring system is des cribed. Some measuring experiments are carried out to testify the methods.展开更多
Atom tracking technology enhanced with innovative algorithms has been implemented in this study,utilizing a comprehensive suite of controllers and software independently developed domestically.Leveraging an on-board f...Atom tracking technology enhanced with innovative algorithms has been implemented in this study,utilizing a comprehensive suite of controllers and software independently developed domestically.Leveraging an on-board field-programmable gate array(FPGA)with a core frequency of 100 MHz,our system facilitates reading and writing operations across 16 channels,performing discrete incremental proportional-integral-derivative(PID)calculations within 3.4 microseconds.Building upon this foundation,gradient and extremum algorithms are further integrated,incorporating circular and spiral scanning modes with a horizontal movement accuracy of 0.38 pm.This integration enhances the real-time performance and significantly increases the accuracy of atom tracking.Atom tracking achieves an equivalent precision of at least 142 pm on a highly oriented pyrolytic graphite(HOPG)surface under room temperature atmospheric conditions.Through applying computer vision and image processing algorithms,atom tracking can be used when scanning a large area.The techniques primarily consist of two algorithms:the region of interest(ROI)-based feature matching algorithm,which achieves 97.92%accuracy,and the feature description-based matching algorithm,with an impressive 99.99%accuracy.Both implementation approaches have been tested for scanner drift measurements,and these technologies are scalable and applicable in various domains of scanning probe microscopy with broad application prospects in the field of nanoengineering.展开更多
Computer vision and its application in the precision control system arediscussed. In the process of fabricating, the accuracy of the products should be controlledreasonably and completely. The precision should be kept...Computer vision and its application in the precision control system arediscussed. In the process of fabricating, the accuracy of the products should be controlledreasonably and completely. The precision should be kept and adjusted according to the information offeedback got from the measurement on-line or out-line in different procedures. Computer vision isone of the useful methods to do this. Computer vision and the image manipulation are presented, andbased on this, a n-dimensional vector to appraise on precision of machining is given.展开更多
AIM： To describe a quantitative analysis method for liver biopsy sections with a machine that we have named ＂Dioguardi Histological Metriser＂ which automatically measures the residual hepatocyte mass （including he...AIM： To describe a quantitative analysis method for liver biopsy sections with a machine that we have named ＂Dioguardi Histological Metriser＂ which automatically measures the residual hepatocyte mass （including hepatocytes vacuolization）, inflammation, fibrosis and the loss of liver tissue tectonics.METHODS： We analysed digitised images of liver biopsy sections taken from 398 patients, The analysis with Dioguardi Histological Metriser was validated by comparison with semi-quantitative scoring system.RESULTS： The method provides： （1） the metrical extension in two-dimensions （the plane） of the residual hepatocellular set, including the area of vacuoles pertinent to abnormal lipid accumulation; （2） the geo- metric measure of the inflammation basin, which distinguishes intra-basin space and extra-basin dispersed parenchymal leukoo/tes; （3） the magnitude of collagen islets, （which were considered truncated fractals and classified into three degrees of magnitude）; and （4） the tectonic index that quantifies alterations （disorders） in the organization of liver tissue. Dioguardi Histological Metriser machine allows to work at a speed of 0.1 mm^2/s, scanning a whole section in 6-8 min.CONCLUSION： The results are the first standardized metrical evaluation of the geometric properties of the parenchyma, inflammation, fibrosis, and alterations in liver tissue tectonics of the biopsy sections. The present study confirms that biopsies are still valuable, not only for diagnosing chronic hepatitis, but also for quantifying changes in the organization and order of liver tissue structure.展开更多
To measure breast basic dimension by using computer-aided projection fringe system.Methods A system has been developed for measuring breast basic dimension based on computer-aided projection fringe measurement and pro...To measure breast basic dimension by using computer-aided projection fringe system.Methods A system has been developed for measuring breast basic dimension based on computer-aided projection fringe measurement and programming software.Plastic manikins breast’s SN-N (sternal notch to nipple distance),N-ML (nipple to midline distance),N-N (internipple distance),MBW (base width of breast) and N-IMF (nipple to inframammary fold distance) are measured with this system.At the same time,these items are also measured with routine ruler.Results This study indicate that the system has some merits:① non-touching measurement;② it is very rapid,the patient measured need hold his breath only 0.5 second,and all the time it takes is about 2.5 minutes;③ the measurement’s sensitivity is as high as to 0.6 mm,which meets the clinic requirement entirely;④ the measurement’s accuracy of the system is not significantly when comparing to the routine ruler’s.Conclusion Computer-adided projection fringe system for measuring breast basic dimension is feasible and advanced.14 refs,1 fig.展开更多
The superiority of hypothetical quantum computers is not due to faster calculations but due to different schemes of calculations running on special hardware. The core of quantum computing follows the way a state of a ...The superiority of hypothetical quantum computers is not due to faster calculations but due to different schemes of calculations running on special hardware. The core of quantum computing follows the way a state of a quantum system is defined when basic things interact with each other. In conventional approach it is implemented through tensor product of qubits. In the geometric algebra formalism simultaneous availability of all the results for non-measured observables is based on the definition of states as points on three-dimensional sphere.展开更多
We have developed a computerized system for measuring field electron emission （FE） and field ionization （FI）, which has a three-electrode configuration with emitters biased up to 25 kV, and is programmed by the La...We have developed a computerized system for measuring field electron emission （FE） and field ionization （FI）, which has a three-electrode configuration with emitters biased up to 25 kV, and is programmed by the Labview software. The current-voltage curves of nano-tip tungsten and carbon nanotube （CNT） arrays were measured. The electron emission of CNTs proceeded with a turn-on field of 1.24 V/μm and a threshold field of 1.85 V/μm. Compared to the field emission, field ionization turned on at 3.5 V/μm. Raman spectroscopy and scanning electron microscopy （SEM） measurements showed degradation of the CNTs after FE/FI testing. The measurement of a W-tip revealed strong electron emission and instability behavior at a field strength higher than 7.0 V/μm.展开更多
After giving a short review of the methods used for detecting and monitoring in general systems, this paper describes the way of communication between computer and Computer Numerical Control (CNC) Machining Center (MC...After giving a short review of the methods used for detecting and monitoring in general systems, this paper describes the way of communication between computer and Computer Numerical Control (CNC) Machining Center (MC). Based on these, the paper addresses the means of performing in cycle measurement for manufacturing quality, provides an approach of improving the state of manufacturing process by achieving the real time change of control parameters according to the level of manufacturing process, and discusses the technique of implementing in process dimensional errors compensation corresponding to the in cycle measurement. The results of the experiments show that the frame design is successful and the operation is reliable. The system is taking shape nowadays.展开更多
Using computer-controlled liquid crystal display (LCD) as an image processor and a CCD camera as a detector, phase-only correlation measurement is performed with the aid of joint transform correlation method (JTC). Th...Using computer-controlled liquid crystal display (LCD) as an image processor and a CCD camera as a detector, phase-only correlation measurement is performed with the aid of joint transform correlation method (JTC). This computer -controlled LCD-CCD image processing system may be a powerful tool for defect detection, position control and pattern recognition. It enables new possibilities in analog real-time image processing. This is of great interest in microelectronic manufacturing today and in the future.展开更多
Shoemaking is one of the areas where CAD/CAM application is rapidly increasing.This paper introduces an integrated computer aided shoemaking system including human foot measuring,last (wooden model)measuring,last CAD/...Shoemaking is one of the areas where CAD/CAM application is rapidly increasing.This paper introduces an integrated computer aided shoemaking system including human foot measuring,last (wooden model)measuring,last CAD/CAM and pattern CAD/CAM.The project was supported by the 7th national economical 5 year plan.High technologies,suh as digital image processing,pattern rcognition,advanced geometrical modeling and a series of sophisticated equipments and devices are ap- plied in this integrated system.Parts of the system have become commercial products.展开更多
Fuel and fuel quantity parameters provide important information for aircraft safe flight. The oil quantity measurement system is an important part of aircraft fuel test. Aiming at the high precision requirement of oil...Fuel and fuel quantity parameters provide important information for aircraft safe flight. The oil quantity measurement system is an important part of aircraft fuel test. Aiming at the high precision requirement of oil quantity measurement in aircraft ground fuel test, the oil quantity measurement system based on computer test is designed, which verifies the feasibility and rationality of the design scheme and control algorithm of the oil quantity measurement software, and saves a lot of time and manpower.展开更多
The purpose of this study is to develop a standard methodology for measuring the surface free energy (SFE),and its component parts of bamboo fiber materials.The current methods was reviewed to determine the surface te...The purpose of this study is to develop a standard methodology for measuring the surface free energy (SFE),and its component parts of bamboo fiber materials.The current methods was reviewed to determine the surface tension of natural fibers and the disadvantages of techniques used were discussed.Although numerous techniques have been employed to characterize surface tension of natural fibers,it seems that the credibility of results obtained may often be dubious.In this paper,critical surface tension estimates were obtained from computer aided machine vision based measurement.Data were then analyzed by the least squares method to estimate the components of SFE.SFE was estimated by least squares analysis and also by Schultz' method.By using the Fowkes method the polar and disperse fractions of the surface free energy of bamboo fiber materials can be obtained.Strictly speaking,this method is based on a combination of the knowledge of Fowkes theory. SFE is desirable when adhesion is required,and it avoids some of the limitations of existing studies which has been proposed.The calculation steps described in this research are only intended to explain the methods.The results show that the method that only determines SFE as a single parameter may be unable to differentiate adequately between bamboo fiber materials,but it is feasible and very efficient.In order to obtain the maximum performance from the computer aided machine vision based measurement instruments,this measurement should be recommended and kept available for reference.展开更多
The working processes, machining devices and tools, cutting amount, consumption of materials, productivity and quality of products are directly affected by wood surface roughness. This paper gives an extensive review ...The working processes, machining devices and tools, cutting amount, consumption of materials, productivity and quality of products are directly affected by wood surface roughness. This paper gives an extensive review of methods used previously to measure wood surface roughness, and concludes that computer vision is the most suitable technique. The preliminary study shows that computer vision method has the advantages of a noncontact, three-dimensional measurement, high speed and well correlates with stylus tracing method. This method can be used in classification and in-time measurement of wood surface roughness after being improved.展开更多
The electromagnetic parameters of microwave absorbing materials are important criteria when appraising the properties of absorbents. For reconstruction of parameters which belongs to the inverse scattering problem, th...The electromagnetic parameters of microwave absorbing materials are important criteria when appraising the properties of absorbents. For reconstruction of parameters which belongs to the inverse scattering problem, the test data in requirement of traditional impedance method are "just enough" and not "redundant" to comprehensively evaluate the electromagnetic properties of materials. A novel optimization approach involving multiple impedance measurements is introduced in this paper to implement automatic measurement for electromagnetic parameters on microwave slot-line. Some results for standard samples and microwave absorbing materials are given.展开更多
A microcomputerized measurement system is developed.This system automatically acquiresan I-V characteristic curve in 5 seconds with the accuracy of 0.05％ FSR(full scale range).The Schottkyextrapolation field-free emi...A microcomputerized measurement system is developed.This system automatically acquiresan I-V characteristic curve in 5 seconds with the accuracy of 0.05％ FSR(full scale range).The Schottkyextrapolation field-free emission,the inflection-point emission,the flection-point emission,the average effec-tive work function.the Richardson work function,the work function distribution at the operation tempera-ture and other important information that reflects properties of cathodes are obtained by this system.The re-sults of analysing four types of cathodes demonstrate that this system is very suitable for measuring the activi-ty changes of the cathode in the processes of activation,ageing,poisoning and life test.It is proved that thissystem can also be used to monitor the actlvity of the cathode in the assembled tube by measuring a gridcontrolled travelling-wave tube.展开更多
Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method...Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method of PID algorithm and the design method of the hardware and software are discussed, The principle diagram of the hardware circuit implementing the control algorithm and the features of the software possessed are also presented.展开更多
With the rapid development of the computer network technologies, in the application of the computer networks, the importance of the network security is becoming increasingly prominent, and computer network security is...With the rapid development of the computer network technologies, in the application of the computer networks, the importance of the network security is becoming increasingly prominent, and computer network security issues have received more and more attention of the communities. In the face of the problems of the security hidden trouble in the computer network, it is essential to take the relevant measures to ensure the safety of the computer network. With the computer network security as the breakthrough point, this paper discusses the precautionary measures of the computer network security based on the analysis of the computer network security, in order to illustrate the importance of the computer network security, to provide references for ensuring the security of the computer network.展开更多
Detecting various parameters of woven fabrics is one of the important methods to evaluate the quality of fabrics.In the early stage of industrial development,fabrics were mainly relied on manual to determine the quali...Detecting various parameters of woven fabrics is one of the important methods to evaluate the quality of fabrics.In the early stage of industrial development,fabrics were mainly relied on manual to determine the quality,which was inefficient and unstable,so intelligent inspection is a popular development trend today.In recent years,computer vision technology has been widely used in the fields of fabric density measurement,color analysis,and weave pattern recognition.Based on the above three aspects,the advanced research progress of global researchers is reviewed in this paper and the shortcomings of current research and possible research directions in the future are analyzed.Computer vision technology is not only objective evaluation,but also has the advantages of accuracy and efficiency,and has a good development prospect in the field of textiles.展开更多
Computer technology has been comprehensively popularized in all walks of life with its continuous development. The construction cost management industry is surely no exception. To improve the application of computer t...Computer technology has been comprehensively popularized in all walks of life with its continuous development. The construction cost management industry is surely no exception. To improve the application of computer technology in construction cost management industry, this thesis would respectively discuss and analyze the importance of computer technology application in construction cost management, status quo of computer technology application in construction cost management, measures of improving computer technology application in construction cost management as well as the development prospect of computer technology application in construction cost management. The author is striving to arouse the attention and exploration of relevant departments as well as practitioners in the same industry.展开更多
文摘Based on the computer integrated and flexible laser p rocessing system, we developed an intelligent measuring sub-system. A novel mod el has been built to compensate the deviations of the main frame-structure, and a laser tracker system is applied to calibrate the accuracy of the system. Anal yzing the characteristics of all kind surfaces of automobile outer penal moulds and dies, the surface and border to be measured and processed are classified int o four types. A 2-D adaptive measuring method based on Bzier curve and a 3 -D adaptive measuring method based on Spline curve are developed for different types of surface. During the data processing, a 3-D probe compensation method i s described in details. The control software of the sub-measuring system is des cribed. Some measuring experiments are carried out to testify the methods.
基金Project supported by the National Science Fund for Distinguished Young Scholars(Grant No.T2125014)the Special Fund for Research on National Major Research Instruments of the National Natural Science Foundation of China(Grant No.11927808)the CAS Key Technology Research and Development Team Project(Grant No.GJJSTD20200005)。
文摘Atom tracking technology enhanced with innovative algorithms has been implemented in this study,utilizing a comprehensive suite of controllers and software independently developed domestically.Leveraging an on-board field-programmable gate array(FPGA)with a core frequency of 100 MHz,our system facilitates reading and writing operations across 16 channels,performing discrete incremental proportional-integral-derivative(PID)calculations within 3.4 microseconds.Building upon this foundation,gradient and extremum algorithms are further integrated,incorporating circular and spiral scanning modes with a horizontal movement accuracy of 0.38 pm.This integration enhances the real-time performance and significantly increases the accuracy of atom tracking.Atom tracking achieves an equivalent precision of at least 142 pm on a highly oriented pyrolytic graphite(HOPG)surface under room temperature atmospheric conditions.Through applying computer vision and image processing algorithms,atom tracking can be used when scanning a large area.The techniques primarily consist of two algorithms:the region of interest(ROI)-based feature matching algorithm,which achieves 97.92%accuracy,and the feature description-based matching algorithm,with an impressive 99.99%accuracy.Both implementation approaches have been tested for scanner drift measurements,and these technologies are scalable and applicable in various domains of scanning probe microscopy with broad application prospects in the field of nanoengineering.
文摘Computer vision and its application in the precision control system arediscussed. In the process of fabricating, the accuracy of the products should be controlledreasonably and completely. The precision should be kept and adjusted according to the information offeedback got from the measurement on-line or out-line in different procedures. Computer vision isone of the useful methods to do this. Computer vision and the image manipulation are presented, andbased on this, a n-dimensional vector to appraise on precision of machining is given.
基金Supported by Istituto Clinico Humanitas IRCCS, Rozzano, MI, the "Michele Rodriguez" Foundation-Institute for Quantitative Measures in Medicine, Milan, Italy
文摘AIM： To describe a quantitative analysis method for liver biopsy sections with a machine that we have named ＂Dioguardi Histological Metriser＂ which automatically measures the residual hepatocyte mass （including hepatocytes vacuolization）, inflammation, fibrosis and the loss of liver tissue tectonics.METHODS： We analysed digitised images of liver biopsy sections taken from 398 patients, The analysis with Dioguardi Histological Metriser was validated by comparison with semi-quantitative scoring system.RESULTS： The method provides： （1） the metrical extension in two-dimensions （the plane） of the residual hepatocellular set, including the area of vacuoles pertinent to abnormal lipid accumulation; （2） the geo- metric measure of the inflammation basin, which distinguishes intra-basin space and extra-basin dispersed parenchymal leukoo/tes; （3） the magnitude of collagen islets, （which were considered truncated fractals and classified into three degrees of magnitude）; and （4） the tectonic index that quantifies alterations （disorders） in the organization of liver tissue. Dioguardi Histological Metriser machine allows to work at a speed of 0.1 mm^2/s, scanning a whole section in 6-8 min.CONCLUSION： The results are the first standardized metrical evaluation of the geometric properties of the parenchyma, inflammation, fibrosis, and alterations in liver tissue tectonics of the biopsy sections. The present study confirms that biopsies are still valuable, not only for diagnosing chronic hepatitis, but also for quantifying changes in the organization and order of liver tissue structure.
文摘To measure breast basic dimension by using computer-aided projection fringe system.Methods A system has been developed for measuring breast basic dimension based on computer-aided projection fringe measurement and programming software.Plastic manikins breast’s SN-N (sternal notch to nipple distance),N-ML (nipple to midline distance),N-N (internipple distance),MBW (base width of breast) and N-IMF (nipple to inframammary fold distance) are measured with this system.At the same time,these items are also measured with routine ruler.Results This study indicate that the system has some merits:① non-touching measurement;② it is very rapid,the patient measured need hold his breath only 0.5 second,and all the time it takes is about 2.5 minutes;③ the measurement’s sensitivity is as high as to 0.6 mm,which meets the clinic requirement entirely;④ the measurement’s accuracy of the system is not significantly when comparing to the routine ruler’s.Conclusion Computer-adided projection fringe system for measuring breast basic dimension is feasible and advanced.14 refs,1 fig.
文摘The superiority of hypothetical quantum computers is not due to faster calculations but due to different schemes of calculations running on special hardware. The core of quantum computing follows the way a state of a quantum system is defined when basic things interact with each other. In conventional approach it is implemented through tensor product of qubits. In the geometric algebra formalism simultaneous availability of all the results for non-measured observables is based on the definition of states as points on three-dimensional sphere.
基金supported by National Natural Science Foundation(No.11075121)the International Science and Technology Cooperation Program(No.2010DFA02010)Three Gorges University of China(KJ2009B011)
文摘We have developed a computerized system for measuring field electron emission （FE） and field ionization （FI）, which has a three-electrode configuration with emitters biased up to 25 kV, and is programmed by the Labview software. The current-voltage curves of nano-tip tungsten and carbon nanotube （CNT） arrays were measured. The electron emission of CNTs proceeded with a turn-on field of 1.24 V/μm and a threshold field of 1.85 V/μm. Compared to the field emission, field ionization turned on at 3.5 V/μm. Raman spectroscopy and scanning electron microscopy （SEM） measurements showed degradation of the CNTs after FE/FI testing. The measurement of a W-tip revealed strong electron emission and instability behavior at a field strength higher than 7.0 V/μm.
文摘After giving a short review of the methods used for detecting and monitoring in general systems, this paper describes the way of communication between computer and Computer Numerical Control (CNC) Machining Center (MC). Based on these, the paper addresses the means of performing in cycle measurement for manufacturing quality, provides an approach of improving the state of manufacturing process by achieving the real time change of control parameters according to the level of manufacturing process, and discusses the technique of implementing in process dimensional errors compensation corresponding to the in cycle measurement. The results of the experiments show that the frame design is successful and the operation is reliable. The system is taking shape nowadays.
基金National Studying Abroad Foundation Management Commission of China!(No. 98822014)
文摘Using computer-controlled liquid crystal display (LCD) as an image processor and a CCD camera as a detector, phase-only correlation measurement is performed with the aid of joint transform correlation method (JTC). This computer -controlled LCD-CCD image processing system may be a powerful tool for defect detection, position control and pattern recognition. It enables new possibilities in analog real-time image processing. This is of great interest in microelectronic manufacturing today and in the future.
文摘Shoemaking is one of the areas where CAD/CAM application is rapidly increasing.This paper introduces an integrated computer aided shoemaking system including human foot measuring,last (wooden model)measuring,last CAD/CAM and pattern CAD/CAM.The project was supported by the 7th national economical 5 year plan.High technologies,suh as digital image processing,pattern rcognition,advanced geometrical modeling and a series of sophisticated equipments and devices are ap- plied in this integrated system.Parts of the system have become commercial products.
文摘Fuel and fuel quantity parameters provide important information for aircraft safe flight. The oil quantity measurement system is an important part of aircraft fuel test. Aiming at the high precision requirement of oil quantity measurement in aircraft ground fuel test, the oil quantity measurement system based on computer test is designed, which verifies the feasibility and rationality of the design scheme and control algorithm of the oil quantity measurement software, and saves a lot of time and manpower.
基金the National Natural Science Foundation of China(No.31101085)the Scientific Research and Development Foundation for Start-up Projects of Zhejiang Agriculture and Forestry University (No.2034020044)
文摘The purpose of this study is to develop a standard methodology for measuring the surface free energy (SFE),and its component parts of bamboo fiber materials.The current methods was reviewed to determine the surface tension of natural fibers and the disadvantages of techniques used were discussed.Although numerous techniques have been employed to characterize surface tension of natural fibers,it seems that the credibility of results obtained may often be dubious.In this paper,critical surface tension estimates were obtained from computer aided machine vision based measurement.Data were then analyzed by the least squares method to estimate the components of SFE.SFE was estimated by least squares analysis and also by Schultz' method.By using the Fowkes method the polar and disperse fractions of the surface free energy of bamboo fiber materials can be obtained.Strictly speaking,this method is based on a combination of the knowledge of Fowkes theory. SFE is desirable when adhesion is required,and it avoids some of the limitations of existing studies which has been proposed.The calculation steps described in this research are only intended to explain the methods.The results show that the method that only determines SFE as a single parameter may be unable to differentiate adequately between bamboo fiber materials,but it is feasible and very efficient.In order to obtain the maximum performance from the computer aided machine vision based measurement instruments,this measurement should be recommended and kept available for reference.
文摘The working processes, machining devices and tools, cutting amount, consumption of materials, productivity and quality of products are directly affected by wood surface roughness. This paper gives an extensive review of methods used previously to measure wood surface roughness, and concludes that computer vision is the most suitable technique. The preliminary study shows that computer vision method has the advantages of a noncontact, three-dimensional measurement, high speed and well correlates with stylus tracing method. This method can be used in classification and in-time measurement of wood surface roughness after being improved.
文摘The electromagnetic parameters of microwave absorbing materials are important criteria when appraising the properties of absorbents. For reconstruction of parameters which belongs to the inverse scattering problem, the test data in requirement of traditional impedance method are "just enough" and not "redundant" to comprehensively evaluate the electromagnetic properties of materials. A novel optimization approach involving multiple impedance measurements is introduced in this paper to implement automatic measurement for electromagnetic parameters on microwave slot-line. Some results for standard samples and microwave absorbing materials are given.
文摘A microcomputerized measurement system is developed.This system automatically acquiresan I-V characteristic curve in 5 seconds with the accuracy of 0.05％ FSR(full scale range).The Schottkyextrapolation field-free emission,the inflection-point emission,the flection-point emission,the average effec-tive work function.the Richardson work function,the work function distribution at the operation tempera-ture and other important information that reflects properties of cathodes are obtained by this system.The re-sults of analysing four types of cathodes demonstrate that this system is very suitable for measuring the activi-ty changes of the cathode in the processes of activation,ageing,poisoning and life test.It is proved that thissystem can also be used to monitor the actlvity of the cathode in the assembled tube by measuring a gridcontrolled travelling-wave tube.
文摘Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method of PID algorithm and the design method of the hardware and software are discussed, The principle diagram of the hardware circuit implementing the control algorithm and the features of the software possessed are also presented.
文摘With the rapid development of the computer network technologies, in the application of the computer networks, the importance of the network security is becoming increasingly prominent, and computer network security issues have received more and more attention of the communities. In the face of the problems of the security hidden trouble in the computer network, it is essential to take the relevant measures to ensure the safety of the computer network. With the computer network security as the breakthrough point, this paper discusses the precautionary measures of the computer network security based on the analysis of the computer network security, in order to illustrate the importance of the computer network security, to provide references for ensuring the security of the computer network.
基金National Natural Science Foundation of China(No.61876106)Shanghai Natural Science Foundation of China(No.18ZR1416600)+1 种基金Shanghai Local Capacity-Building Project,China(No.19030501200)Zhihong Scholars Plan of Shanghai University of Engineering Science,China(No.2018RC032017)。
文摘Detecting various parameters of woven fabrics is one of the important methods to evaluate the quality of fabrics.In the early stage of industrial development,fabrics were mainly relied on manual to determine the quality,which was inefficient and unstable,so intelligent inspection is a popular development trend today.In recent years,computer vision technology has been widely used in the fields of fabric density measurement,color analysis,and weave pattern recognition.Based on the above three aspects,the advanced research progress of global researchers is reviewed in this paper and the shortcomings of current research and possible research directions in the future are analyzed.Computer vision technology is not only objective evaluation,but also has the advantages of accuracy and efficiency,and has a good development prospect in the field of textiles.
文摘Computer technology has been comprehensively popularized in all walks of life with its continuous development. The construction cost management industry is surely no exception. To improve the application of computer technology in construction cost management industry, this thesis would respectively discuss and analyze the importance of computer technology application in construction cost management, status quo of computer technology application in construction cost management, measures of improving computer technology application in construction cost management as well as the development prospect of computer technology application in construction cost management. The author is striving to arouse the attention and exploration of relevant departments as well as practitioners in the same industry.
