Nano-calcium carbonate composite particles were synthesized by the soapless emulsion polymerization technique of double monomers. The composite particles formation mechanism was investigated. The effects of composite ...Nano-calcium carbonate composite particles were synthesized by the soapless emulsion polymerization technique of double monomers. The composite particles formation mechanism was investigated. The effects of composite particles on the mechanical properties of nano-CaCO3-ABS （acrylonitrile-butadiene-styrene copolymer） composite material were studied. It was validated that the composite particles are made up of the nano-calcium carbonate cores and the shells of alternating copolymers of butyl acrylate （BA） and styrene （St）. The shells are chemically grafted and physically wrapped on the surface of nano-calcium carbonate particles. When the composite particles were filled in ABS matrix, the CaCO3 particles are homogeneously dispersed in the composite material as nanoscales. The impact strength of the composite material is obviously enhanced after filling appropriate amounts of composite particles. It can be concluded that the soapless emulsion polymerization of double monomers is an effective method for nano-CaCO3 surface treatment. 2008 University of Science and Technology Beijing. All rights reserved.展开更多
Objective： To establish a method of genomic DNA extraction from whole blood using Fe3O4/Au composite particles as a carrier. Methods： Two crucial conditions （sodium chloride concentration and amount of the magnetic...Objective： To establish a method of genomic DNA extraction from whole blood using Fe3O4/Au composite particles as a carrier. Methods： Two crucial conditions （sodium chloride concentration and amount of the magnetic particles） were optimized and 8 different human whole blood samples were used to purify genomic DNA under the optimal condition. Then agarose gel electrophoresis and polymerase cbain reaction （PCR） were performed. Results： The optimal binding condition was 1.5 mol/L NaC1/10% PEG, and the optimal amount of Fe3O4/Au composite particles was 600μg. The yields of the genomic DNA from 100μl of different whole blood samples were 2-5 μg, and the ratio of A260/A280 was in the range of 1.70-1.90. The size of genomic DNA was about 23 kb and the PCR was valid. Conclusion： The purification system using Fe3O4/Au composite microparticles has advantages in high yield, high purity, ease of operating, time saving and avoiding centrifugation. The purified sample was found to function satisfactorily in PCR amplification.展开更多
Ultrasonic arc spray atomization (UASA) method was used to prepare high-melting-point, immiscible AgNi15 (mass fraction, %) composite particles. Sieving was used to determine the size distribution of the AgNi15 partic...Ultrasonic arc spray atomization (UASA) method was used to prepare high-melting-point, immiscible AgNi15 (mass fraction, %) composite particles. Sieving was used to determine the size distribution of the AgNi15 particles. The morphology, rapidly solidified structure and metastable solution expansion of the AgNi15 particles were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS), respectively. The results show that the AgNi15 composite particles are spherical and well-dispersed, and the mass fractions of the particles with diameters <74μm and <55 μm are 99.5% and 98%, respectively. The rapidly solidified structure of the AgNi15 particles consists of spherical nickel-richβ(Ni)-phase particles dispersed throughout a silver-richα(Ag)-phase matrix andα(Ag)-phase nanoparticles dispersed throughout largerβ(Ni)-phase particles. The silver and nickel in the AgNi15 particles form a reciprocally extended metastable solution, and the solid solubility of nickel in the silver matrix at room temperature is in the range of 0.16%?0.36% (mole fraction).展开更多
Polyaniline-barium titanate (PAn-Ba-TiO3) ultrafine composite particles were prepared by the oxidative polymerization of aniline with H2O2 while barium titanate nanoparticles were synthesized with a sol-gel method. Th...Polyaniline-barium titanate (PAn-Ba-TiO3) ultrafine composite particles were prepared by the oxidative polymerization of aniline with H2O2 while barium titanate nanoparticles were synthesized with a sol-gel method. The infrared spectrogram shows that the polymerization of PAn in the hybrid process of PAn-BaTiO3 is similar with the polymeric process of pure aniline, and there is interaction of PAn and BaTiO3 in the PAn-Ba-TiO3. SEM and TEM results show that the average diameter of the composite particles is 1.50μm and the diameters of BaTiO3 nanoparticles are 5 - 15 nm in the composite particle. The electrical conductivity of the ultrafine com-posite particles is transformable from 10°to 10-11S/cm by equilibrium doping or dedoping method using various concentration of HCl or NaOH solutions.展开更多
Graphite/TiO2 composite particles were obtained by sol-gel technique in this paper. The structure and characteristic of the composite particles are analyzed by XRD, SEM and TG-DTA. The electrorheological properties of...Graphite/TiO2 composite particles were obtained by sol-gel technique in this paper. The structure and characteristic of the composite particles are analyzed by XRD, SEM and TG-DTA. The electrorheological properties of the ER fluid containing the particles were measured by a Couette-type rheometer under shear rates of 1-136 s-1 and AC electric fields of 0-3 kV/mm. The experimental results show that the leaking current density of the ER fluid is higher than that of pure titanium dioxide particles dispersed in damping oil. The shear yield stress of the ER fluid increases with increasing electric field and exhibits a typical Bingham flow behavior. The suspension demonstrates an excellent ER performance (τ/τo=1200) compared with conventional ER fluids (τ/τ0 ≤500). The sedimentation of the ER fluid is improved obviously due to the coating effect of the particles.展开更多
Gelatincarbonyl iron composite particle was prepared by micro emulsion method. The analysis of scanning electron microscope(SEM) shows that the ultrafine particles are spheroids coated by gelatin, and the average size...Gelatincarbonyl iron composite particle was prepared by micro emulsion method. The analysis of scanning electron microscope(SEM) shows that the ultrafine particles are spheroids coated by gelatin, and the average sizes of particles are 310μm. The specific saturation magnetization σ_s is 130.9A·m2/kg, coercivity H_c is 0.823A/m, and residual magnetism r is 4.98Am2/kg for the composite particles. It is shown that the particles possess properties of soft magnetic. The yield stress of magnetorheological fluid(MRF) with composite particle reaches 70kPa at 0.5T magnetic induction. Magnetorheological effects are superior in lower magnetic field intensity and the subsidence stability of the MRF is excellent compared with pure carbonyl iron powder.展开更多
The present article develops a model initially published in ref. [1]. It is a quasi-classical quantum model of composite particles with ultra-relativistic (UR) constituents (leptons and quarks). The model is used to c...The present article develops a model initially published in ref. [1]. It is a quasi-classical quantum model of composite particles with ultra-relativistic (UR) constituents (leptons and quarks). The model is used to calculate the mass energy of three composite particles: a UR tauonium, a UR bottomonium and a UR leptoquarkonium. The result is that these three hypothetic particles have masses close to 125 GeV: the Higgs boson mass energy. These results are recalled in the present article. Then the model is extended to calculate the mass energy of <i>pi</i>-mesons, <i>W</i> and <i>Z</i> bosons. Finally, the model provides a hypothesis on dark matter.展开更多
We review a 3d quantum gravity model, which incorporates massive spinning fields into the Euclidean path integral in a Chern-Simons formulation. Fundamental matter as defined in our previous preon model is recapped. B...We review a 3d quantum gravity model, which incorporates massive spinning fields into the Euclidean path integral in a Chern-Simons formulation. Fundamental matter as defined in our previous preon model is recapped. Both quantum gravity and the particle model are shown to be derivable from the supersymmetric 3d Chern-Simons action. Forces-Matter unification is achieved.展开更多
To obtain the Ti_(p)with different aspect ratios,the Ti_(p)/Mg-5Zn-0.3Ca composite prepared by semi-solid stir casting was subjected to extrusion at 220℃,180℃,and 140℃,respectively.Then,the effect of the Ti_(p)’s ...To obtain the Ti_(p)with different aspect ratios,the Ti_(p)/Mg-5Zn-0.3Ca composite prepared by semi-solid stir casting was subjected to extrusion at 220℃,180℃,and 140℃,respectively.Then,the effect of the Ti_(p)’s aspect ratio on the microstructure,mechanical properties,work hardening and softening behaviors of Ti_(p)/Mg-5Zn-0.3Ca composites was investigated.The results indicated that the Ti_(p)could be elongated obviously after low-temperature extrusion,and the aspect ratio of which would reach to 13.7:1 as the extrusion temperature deceased to 140℃.Then the“Ti/Mg”layer-like structure was formed in the Ti_(p)/Mg-5Zn-0.3Ca composite.Accompanied with the elongation of Ti_(p),the dynamic recrystallized grains and dynamic precipitates were both refined significantly,however,the dynamic recrystallization rate changed a little.The elongated Ti_(p)endowed the Ti_(p)/Mg-5Zn-0.3Ca composites with better matching of strength and toughness without the sacrifice of elongation and bending strain.Both the work hardening rate and softening rate of Ti_(p)/Mg-5Zn-0.3Ca composites increased with the increasing aspect ratio of Ti_(p).The formation of“Ti/Mg”layer-like structure contributed to the redistribution of strain from large aggregations to a network-like distribution,which effectively suppresses the initiation and propagation of micro-cracks,thus enhancing the plasticity of the Ti_(p)/Mg-5Zn-0.3Ca composites.展开更多
A model with three-layer structure is introduced to explore the acoustic radiation force(ARF)on composite particles with an elastic thin shell.Combing acoustic scattering of cylinder and the thin-shell theorem,the ARF...A model with three-layer structure is introduced to explore the acoustic radiation force(ARF)on composite particles with an elastic thin shell.Combing acoustic scattering of cylinder and the thin-shell theorem,the ARF expression was derived,and the longitudinal and transverse components of the force and axial torque for an eccentric liquid-filled composite particle was obtained.It was found that many factors,such as medium properties,acoustic parameters,eccentricity,and radius ratio of the inner liquid column,affect the acoustic scattering field of the particle,which in turn changes the forces and torque.The acoustic response varies with the particle structures,so the resonance peaks of the force function and torque shift with the eccentricity and radii ratio of particle.The acoustic response of the particle is enhanced and exhibits higher force values due to the presence of the elastic thin shell and the coupling effect with the eccentricity of the internal liquid column.The decrease of the inner liquid density may suppress the high-order resonance peaks,and internal fluid column has less effects on the change in force on composite particle at ka>3,while limited differences exist at ka<3.The axial torque on particles due to geometric asymmetry is closely related to ka and the eccentricity.The distribution of positive and negative force and torque along the axis ka exhibits that composite particle can be manipulated or separated by ultrasound.Our theoretical analysis can provide support for the acoustic manipulation,sorting,and targeting of inhomogeneous particles.展开更多
In order to improve its dispersibility, superfine alumina （A1203） was encapsulated with poly（methyl methacrylate） （PMMA） by in situ emulsion polymerization. It was found that only when the concentration of sodiu...In order to improve its dispersibility, superfine alumina （A1203） was encapsulated with poly（methyl methacrylate） （PMMA） by in situ emulsion polymerization. It was found that only when the concentration of sodium dodecyl sulfate （SDS） was much higher than its critical micelle concentration, could PMMA/Al2O3 composite particles with high percentage of grafting （PG） be prepared. The same results were obtained between the experimental and stoichiometric amounts of tris（dodecylbenzenesulfonate） isopropoxide （NDZ）, indicating that single-molecule-layer adsorption had taken place between NDZ and Al2O3. Analysis using FTIR, TEM and XPS showed that PMMA/Al2O3 composite particles with core-shell structure had been successfully synthesized by in situ emulsion polymerization. Compared to Al2O3, thermal stability and dispersibility of the composite particles showed marked improvement.展开更多
Higher-order multiscale structures are proposed to predict the effective elastic properties of 3-phase particle reinforced composites by considering the probabilistic spherical particles spatial distribution,the parti...Higher-order multiscale structures are proposed to predict the effective elastic properties of 3-phase particle reinforced composites by considering the probabilistic spherical particles spatial distribution,the particle interactions,and utilizing homogenization with ensemble volume average approach.The matrix material,spherical particles with radius a1,and spherical particles with radius a2,are denoted as the 0th phase,the 1st phase,and the 2nd phase,respectively.Particularly,the two inhomogeneity phases are different particle sizes and the same elastic material properties.Improved higher-order(in ratio of spherical particle sizes to the distance between the centers of spherical particles)bounds on effective elastic properties of 3-phase particle reinforced proposed Formulation II and Formulation I derive composites.As a special case,i.e.,particle size of the 1st phase is the same as that of the 2nd phase,the proposed formulations reduce to 2-phase formulas.Our theoretical predictions demonstrate excellent agreement with selected experimental data.In addition,several numerical examples are presented to demonstrate the competence of the proposed frameworks.展开更多
Both the coarsening of Al2O3 nanoparticles and the growth of Cu nanograins of mechanically milled nanostructured Cu-5 vol.%Al2O3 composites with, and without, trace amounts of Ti during annealing at973 K for 1 h were ...Both the coarsening of Al2O3 nanoparticles and the growth of Cu nanograins of mechanically milled nanostructured Cu-5 vol.%Al2O3 composites with, and without, trace amounts of Ti during annealing at973 K for 1 h were investigated. It was found that doping with a small amount of Ti（e.g. 0.2 wt%） in a nanostructured Cu-5 vol.%Al2O3 composite effectively suppressed the coarsening of Al2O3 nanoparticles during exposure at this temperature. Further, the Ti addition also prevented the concomitant abnormal growth of the copper grains normally caused by the coarsening of the Al2O3 nanoparticles. Energy dispersive X-ray spectroscopy analysis of the Al2O3 nanoparticles in the annealed Cu-5 vol.%Al2 O3-0.2 wt%Ti sample suggested that the Ti atoms either diffused into the Al2O3 nanoparticles or segregated to the Cu/Al2O3 interfaces to form Ti-doped Al2O3 nanoparticles, which was more stable than Ti-free Al2O3 nanoparticles during annealing at high homologous temperatures.展开更多
Single-particle aerosol mass spectrometry was used to study the characteristics of Fecontaining particles during winter in Chengdu,southwest China.The mass concentrations of PM_(2.5)and PM_(10)during the study period ...Single-particle aerosol mass spectrometry was used to study the characteristics of Fecontaining particles during winter in Chengdu,southwest China.The mass concentrations of PM_(2.5)and PM_(10)during the study period were 64±38 and 89±49μg/m~3,respectively,and NO_(2)and particulate matter were high compared with most other regions of China.The Fecontaining particles were divided into seven categories with different mass spectra,sources and aging characteristics.The highest contribution was from Fe mixed with carbonaceous components(Fe-C,23.1%)particles.Fe was more mixed with sulfate than nitrate and therefore the contribution of Fe mixed with sulfate(Fe-S,20.7%)particles was higher than that of Fe mixed with nitrate(Fe-N,12.5%)particles.The contributions from Fe-containing particles related to primary combustion were high in the small particle size range,whereas aged Fecontaining particles and dust-related particles were mostly found in the coarse particle size range.The air masses mainly originated from the west and east of Chengdu,and the corresponding PM_(2.5)concentrations were 79±36 and 55±36μg/m~3,respectively.The west and east air masses showed stronger contributions of Fe-containing particles related to biomass burning(Fe-B)and fossil fuel combustion(Fe-C and Fe-S)particles,respectively.The southwest area contributed the most Fe-containing particles.Future assessments of the effects of Fe-containing particles during heavy pollution period should pay more attention to Fe-C and Fe-S particles.Emission-reduction of Fe-containing particles should consider both local emissions and short-distance transmission from the surrounding areas.展开更多
Polystyrene （PSt） microspheres with diameter of 375 nm to be used as the seeds for seeded emulsion polymerization were prepared via emulsion polymerization using potassium persulfate （KPS） as initiator in ethanol-...Polystyrene （PSt） microspheres with diameter of 375 nm to be used as the seeds for seeded emulsion polymerization were prepared via emulsion polymerization using potassium persulfate （KPS） as initiator in ethanol-water mixed solvents. Emulsifier-free seeded emulsion copolymerization of styrene （St） with acrylonitrile （AN） was carried out in the presence of poly（ethylene glycol） monomethoxymonomethacrylate （PEGm） macromonomer as reactive stabilizer and 2,2＇-azobisisobutyronitrile （AIBN） as initiator to obtain submicron-sized PEGm graft poly（styrene-coacrylonitrile） （PEGm-g-PSAN） composite particles with unique morphology. Scanning electron microscopy （SEM） indicated that St and AN together contributed to forming the unusual morphology. The concentration of St and AN, total monomer concentration, initiator type and the monomer adding method remarkably affected the morphology of the composite polymer particles.展开更多
In the presence of titanium dioxide powder, cross-linking reaction between commercial polyvinyl alcohol(PVA)-based macromonomer and acrylic acid(AA) was initiated with potassium persulfate in an emulsifying system. As...In the presence of titanium dioxide powder, cross-linking reaction between commercial polyvinyl alcohol(PVA)-based macromonomer and acrylic acid(AA) was initiated with potassium persulfate in an emulsifying system. As a result, PVA-AA/TiO2 composite gel particles were obtained. The morphology and composition of the particles were analyzed with scanning electron microscopy(SEM), energy scattering x-ray spectroscopy(EDS), Fourier infrared spectroscopy(FTIR), and thermogravimetric analysis(TGA). The analysis results confirmed that the particles were the expected ones. TiO2 was dispersed homogeneously within the spheroidal particles. Compared to the control gel, the composite gel particles not only contained Ti element but also showed higher thermal stability. In addition, the photo-catalytic behavior of the particles for the degradation of methyl orange contained in aqueous solution was examined. The particles exhibited photocatalytic characteristic for the degradation of the model dye, which could be modulated by simply varying the amount of cross-linking agent or TiO2. The photo-catalytic degradation percentage of methyl orange maintained at 91%-96% after using the particles three times, which indicated that TiO2 could played its role repeatedly via being fixated within polyvinyl alcohol-based gel.展开更多
Calcined kaolin/TiO2 composite particle material （CK/TCPM） was prepared with TiO2 coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction （XRD） and scanning electron ...Calcined kaolin/TiO2 composite particle material （CK/TCPM） was prepared with TiO2 coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction （XRD） and scanning electron microscope （SEM） were used to investigate the microstructures and morphologies, respectively. The mechanism of the mechano-chemical reaction between calcined kaolin and TiO2 was studied by infrared spectra （IR）. The results show that TiO2 coats evenly on the surfaces of calcined kaolin particles by Si-O-Ti and Al-O-Ti bonds on their interfaces. The hiding power and whiteness of CK/TCPM are 17.12 g/m^2 and 95.7%, respectively, presenting its similarity to TiO2 in pigment properties.展开更多
Polystyrene coated silica（SiO_2@PS） core-shell composite particles with averaged diameter of about 290 nm were prepared by in situ emulsion polymerization of styrene on the surface ofγ-methacryloxypropyltrimethoxys...Polystyrene coated silica（SiO_2@PS） core-shell composite particles with averaged diameter of about 290 nm were prepared by in situ emulsion polymerization of styrene on the surface ofγ-methacryloxypropyltrimethoxysilane grafted SiO_2 nanoparticles of 20-50 nm in diameter.Rheological behavior and dispersion stability of SiO_2@PS suspension in 10 wt%PS solution were compared with suspensions of untreated SiO_2 and silane modified SiO_2 nanoparticles.Suspensions of the untreated and the silane modified SiO_2 exhibited obvious shear thinning.The SiO-2@PS suspension exhibits shear viscosity considerably smaller than suspensions of untreated and silane modified SiO_2 at low shear rates.Transmission electron microscopy showed that the composite particles can uniformly and stably disperse in PS solution compared to other suspensions,implying that the PS shell can effectively enhance the particle compatibility with PS macromolecules in solution.展开更多
In this paper, a facile synthesis of 100 nm commercial colloid silica coated with nano-ceria core-shell composite particles by the precipitation method using ammonium cerium nitrate and urea as a precipitator with pol...In this paper, a facile synthesis of 100 nm commercial colloid silica coated with nano-ceria core-shell composite particles by the precipitation method using ammonium cerium nitrate and urea as a precipitator with polyvinylpyrrolidone （PVP） as an assistant was briefly introduced. The results showed that the colloid silica was surrounded by nano-ceria uniformly forming the core-shell composite particles. The synthesis process was further discussed and optimized. It was found that the type and quantity of surfactant played a key role in the process. PVP connected the surface of colloid silica and that of the ceria precursor.展开更多
By using SrTiO 3/PANI as a dispersed phase and silicone oil as a dispersion medium, the rheological characteristic of the dispersion medium under an electric field and the ERF performances of the mixture of SrTiO 3/...By using SrTiO 3/PANI as a dispersed phase and silicone oil as a dispersion medium, the rheological characteristic of the dispersion medium under an electric field and the ERF performances of the mixture of SrTiO 3/PANI composite particles and silicone oil under different dispersed phase consistencies and different medium viscosities have been investigated. The measurements of the rheological characteristic, that is the shear stress of ERF, under shearing flow were performed with a Couette-type rheometer manufactured by HAAKE. It is proved that the rheological characteristic of the dispersion medium follows Newtonian fluid viscosity law and the ERF rheological characteristic of the mixture of the dispersion medium and dispersed phase obeys Bingham fluid model under electric field. The experimental result shows that the effects of different phase consistencies and different dispersion medium viscosities on ERF performances are great. The testing expressions of shear stress vs. electric field under different conditions have been obtained by polynomial fit, which is the theory foundation of application in engineering.展开更多
基金the National Natural Science Foundation of China(No.20236020,20325621)the National R & D Program of China(No.2001BA310A01).
文摘Nano-calcium carbonate composite particles were synthesized by the soapless emulsion polymerization technique of double monomers. The composite particles formation mechanism was investigated. The effects of composite particles on the mechanical properties of nano-CaCO3-ABS （acrylonitrile-butadiene-styrene copolymer） composite material were studied. It was validated that the composite particles are made up of the nano-calcium carbonate cores and the shells of alternating copolymers of butyl acrylate （BA） and styrene （St）. The shells are chemically grafted and physically wrapped on the surface of nano-calcium carbonate particles. When the composite particles were filled in ABS matrix, the CaCO3 particles are homogeneously dispersed in the composite material as nanoscales. The impact strength of the composite material is obviously enhanced after filling appropriate amounts of composite particles. It can be concluded that the soapless emulsion polymerization of double monomers is an effective method for nano-CaCO3 surface treatment. 2008 University of Science and Technology Beijing. All rights reserved.
基金Supported by the National High Technology Research and Development Program of China (2006AA020705)
文摘Objective： To establish a method of genomic DNA extraction from whole blood using Fe3O4/Au composite particles as a carrier. Methods： Two crucial conditions （sodium chloride concentration and amount of the magnetic particles） were optimized and 8 different human whole blood samples were used to purify genomic DNA under the optimal condition. Then agarose gel electrophoresis and polymerase cbain reaction （PCR） were performed. Results： The optimal binding condition was 1.5 mol/L NaC1/10% PEG, and the optimal amount of Fe3O4/Au composite particles was 600μg. The yields of the genomic DNA from 100μl of different whole blood samples were 2-5 μg, and the ratio of A260/A280 was in the range of 1.70-1.90. The size of genomic DNA was about 23 kb and the PCR was valid. Conclusion： The purification system using Fe3O4/Au composite microparticles has advantages in high yield, high purity, ease of operating, time saving and avoiding centrifugation. The purified sample was found to function satisfactorily in PCR amplification.
基金Project(2009CC010)supported by the Application Basic Research Foundation of Yunnan Province,ChinaProject(51264037)supported by the National Natural Science Foundation of China
文摘Ultrasonic arc spray atomization (UASA) method was used to prepare high-melting-point, immiscible AgNi15 (mass fraction, %) composite particles. Sieving was used to determine the size distribution of the AgNi15 particles. The morphology, rapidly solidified structure and metastable solution expansion of the AgNi15 particles were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS), respectively. The results show that the AgNi15 composite particles are spherical and well-dispersed, and the mass fractions of the particles with diameters <74μm and <55 μm are 99.5% and 98%, respectively. The rapidly solidified structure of the AgNi15 particles consists of spherical nickel-richβ(Ni)-phase particles dispersed throughout a silver-richα(Ag)-phase matrix andα(Ag)-phase nanoparticles dispersed throughout largerβ(Ni)-phase particles. The silver and nickel in the AgNi15 particles form a reciprocally extended metastable solution, and the solid solubility of nickel in the silver matrix at room temperature is in the range of 0.16%?0.36% (mole fraction).
基金Funded by Chinese National Natural Science Foundation (No.29674021) and Key Foundation (No. 59832090). and Open Foundation from State Key Lab. of Advanced Technology for Materials Synthesis and Processing.
文摘Polyaniline-barium titanate (PAn-Ba-TiO3) ultrafine composite particles were prepared by the oxidative polymerization of aniline with H2O2 while barium titanate nanoparticles were synthesized with a sol-gel method. The infrared spectrogram shows that the polymerization of PAn in the hybrid process of PAn-BaTiO3 is similar with the polymeric process of pure aniline, and there is interaction of PAn and BaTiO3 in the PAn-Ba-TiO3. SEM and TEM results show that the average diameter of the composite particles is 1.50μm and the diameters of BaTiO3 nanoparticles are 5 - 15 nm in the composite particle. The electrical conductivity of the ultrafine com-posite particles is transformable from 10°to 10-11S/cm by equilibrium doping or dedoping method using various concentration of HCl or NaOH solutions.
基金The authors are thankful to the support of the National Natural Science Foundation of China(Grant No.50135030).
文摘Graphite/TiO2 composite particles were obtained by sol-gel technique in this paper. The structure and characteristic of the composite particles are analyzed by XRD, SEM and TG-DTA. The electrorheological properties of the ER fluid containing the particles were measured by a Couette-type rheometer under shear rates of 1-136 s-1 and AC electric fields of 0-3 kV/mm. The experimental results show that the leaking current density of the ER fluid is higher than that of pure titanium dioxide particles dispersed in damping oil. The shear yield stress of the ER fluid increases with increasing electric field and exhibits a typical Bingham flow behavior. The suspension demonstrates an excellent ER performance (τ/τo=1200) compared with conventional ER fluids (τ/τ0 ≤500). The sedimentation of the ER fluid is improved obviously due to the coating effect of the particles.
文摘Gelatincarbonyl iron composite particle was prepared by micro emulsion method. The analysis of scanning electron microscope(SEM) shows that the ultrafine particles are spheroids coated by gelatin, and the average sizes of particles are 310μm. The specific saturation magnetization σ_s is 130.9A·m2/kg, coercivity H_c is 0.823A/m, and residual magnetism r is 4.98Am2/kg for the composite particles. It is shown that the particles possess properties of soft magnetic. The yield stress of magnetorheological fluid(MRF) with composite particle reaches 70kPa at 0.5T magnetic induction. Magnetorheological effects are superior in lower magnetic field intensity and the subsidence stability of the MRF is excellent compared with pure carbonyl iron powder.
文摘The present article develops a model initially published in ref. [1]. It is a quasi-classical quantum model of composite particles with ultra-relativistic (UR) constituents (leptons and quarks). The model is used to calculate the mass energy of three composite particles: a UR tauonium, a UR bottomonium and a UR leptoquarkonium. The result is that these three hypothetic particles have masses close to 125 GeV: the Higgs boson mass energy. These results are recalled in the present article. Then the model is extended to calculate the mass energy of <i>pi</i>-mesons, <i>W</i> and <i>Z</i> bosons. Finally, the model provides a hypothesis on dark matter.
文摘We review a 3d quantum gravity model, which incorporates massive spinning fields into the Euclidean path integral in a Chern-Simons formulation. Fundamental matter as defined in our previous preon model is recapped. Both quantum gravity and the particle model are shown to be derivable from the supersymmetric 3d Chern-Simons action. Forces-Matter unification is achieved.
基金supported by the“National Natural Science Foundation of China”(Grants.52271109 and 52001223)Support from the“National Key Research and Development Program for Young Scientists”(Grant.2021YFB3703300)+1 种基金the Major Special Plan for Science and Technology in Shanxi Province(202201050201012)the Special Fund Project for Guiding Local Science and Technology Development by the Central Government(Grant.YDZJSX2021B019)。
文摘To obtain the Ti_(p)with different aspect ratios,the Ti_(p)/Mg-5Zn-0.3Ca composite prepared by semi-solid stir casting was subjected to extrusion at 220℃,180℃,and 140℃,respectively.Then,the effect of the Ti_(p)’s aspect ratio on the microstructure,mechanical properties,work hardening and softening behaviors of Ti_(p)/Mg-5Zn-0.3Ca composites was investigated.The results indicated that the Ti_(p)could be elongated obviously after low-temperature extrusion,and the aspect ratio of which would reach to 13.7:1 as the extrusion temperature deceased to 140℃.Then the“Ti/Mg”layer-like structure was formed in the Ti_(p)/Mg-5Zn-0.3Ca composite.Accompanied with the elongation of Ti_(p),the dynamic recrystallized grains and dynamic precipitates were both refined significantly,however,the dynamic recrystallization rate changed a little.The elongated Ti_(p)endowed the Ti_(p)/Mg-5Zn-0.3Ca composites with better matching of strength and toughness without the sacrifice of elongation and bending strain.Both the work hardening rate and softening rate of Ti_(p)/Mg-5Zn-0.3Ca composites increased with the increasing aspect ratio of Ti_(p).The formation of“Ti/Mg”layer-like structure contributed to the redistribution of strain from large aggregations to a network-like distribution,which effectively suppresses the initiation and propagation of micro-cracks,thus enhancing the plasticity of the Ti_(p)/Mg-5Zn-0.3Ca composites.
基金the National Natural Science Foundation of China(Grant Nos.12374441 and 11974232)the Fund from Yulin Science and Technology Bureau(Grant No.CXY-2022-178).
文摘A model with three-layer structure is introduced to explore the acoustic radiation force(ARF)on composite particles with an elastic thin shell.Combing acoustic scattering of cylinder and the thin-shell theorem,the ARF expression was derived,and the longitudinal and transverse components of the force and axial torque for an eccentric liquid-filled composite particle was obtained.It was found that many factors,such as medium properties,acoustic parameters,eccentricity,and radius ratio of the inner liquid column,affect the acoustic scattering field of the particle,which in turn changes the forces and torque.The acoustic response varies with the particle structures,so the resonance peaks of the force function and torque shift with the eccentricity and radii ratio of particle.The acoustic response of the particle is enhanced and exhibits higher force values due to the presence of the elastic thin shell and the coupling effect with the eccentricity of the internal liquid column.The decrease of the inner liquid density may suppress the high-order resonance peaks,and internal fluid column has less effects on the change in force on composite particle at ka>3,while limited differences exist at ka<3.The axial torque on particles due to geometric asymmetry is closely related to ka and the eccentricity.The distribution of positive and negative force and torque along the axis ka exhibits that composite particle can be manipulated or separated by ultrasound.Our theoretical analysis can provide support for the acoustic manipulation,sorting,and targeting of inhomogeneous particles.
文摘In order to improve its dispersibility, superfine alumina （A1203） was encapsulated with poly（methyl methacrylate） （PMMA） by in situ emulsion polymerization. It was found that only when the concentration of sodium dodecyl sulfate （SDS） was much higher than its critical micelle concentration, could PMMA/Al2O3 composite particles with high percentage of grafting （PG） be prepared. The same results were obtained between the experimental and stoichiometric amounts of tris（dodecylbenzenesulfonate） isopropoxide （NDZ）, indicating that single-molecule-layer adsorption had taken place between NDZ and Al2O3. Analysis using FTIR, TEM and XPS showed that PMMA/Al2O3 composite particles with core-shell structure had been successfully synthesized by in situ emulsion polymerization. Compared to Al2O3, thermal stability and dispersibility of the composite particles showed marked improvement.
基金This work was in part sponsored by the 2015-2016 California State University Long Beach Research,Scholarship and Creative Activity(RSCA)Award。
文摘Higher-order multiscale structures are proposed to predict the effective elastic properties of 3-phase particle reinforced composites by considering the probabilistic spherical particles spatial distribution,the particle interactions,and utilizing homogenization with ensemble volume average approach.The matrix material,spherical particles with radius a1,and spherical particles with radius a2,are denoted as the 0th phase,the 1st phase,and the 2nd phase,respectively.Particularly,the two inhomogeneity phases are different particle sizes and the same elastic material properties.Improved higher-order(in ratio of spherical particle sizes to the distance between the centers of spherical particles)bounds on effective elastic properties of 3-phase particle reinforced proposed Formulation II and Formulation I derive composites.As a special case,i.e.,particle size of the 1st phase is the same as that of the 2nd phase,the proposed formulations reduce to 2-phase formulas.Our theoretical predictions demonstrate excellent agreement with selected experimental data.In addition,several numerical examples are presented to demonstrate the competence of the proposed frameworks.
基金supported financially by the China Scholarship Council (CSC)National Natural Science Foundation of China (Project No. 51271115)+1 种基金the Ministry of Science and Technology, China (Project No. 2012CB619600)the SJTU-UNSW Strategic Collaboration to conduct this investigation
文摘Both the coarsening of Al2O3 nanoparticles and the growth of Cu nanograins of mechanically milled nanostructured Cu-5 vol.%Al2O3 composites with, and without, trace amounts of Ti during annealing at973 K for 1 h were investigated. It was found that doping with a small amount of Ti（e.g. 0.2 wt%） in a nanostructured Cu-5 vol.%Al2O3 composite effectively suppressed the coarsening of Al2O3 nanoparticles during exposure at this temperature. Further, the Ti addition also prevented the concomitant abnormal growth of the copper grains normally caused by the coarsening of the Al2O3 nanoparticles. Energy dispersive X-ray spectroscopy analysis of the Al2O3 nanoparticles in the annealed Cu-5 vol.%Al2 O3-0.2 wt%Ti sample suggested that the Ti atoms either diffused into the Al2O3 nanoparticles or segregated to the Cu/Al2O3 interfaces to form Ti-doped Al2O3 nanoparticles, which was more stable than Ti-free Al2O3 nanoparticles during annealing at high homologous temperatures.
基金supported by the Scientific Research Project (No.17ZB0484)of Sichuan Provincial Department of EducationScientific Research Project (No.2021ZKQN004)of Southwest Medical University+1 种基金National Natural Science Foundation of China (No.41805095)Sichuan Science and Technology Program (No.2019YFS0476)。
文摘Single-particle aerosol mass spectrometry was used to study the characteristics of Fecontaining particles during winter in Chengdu,southwest China.The mass concentrations of PM_(2.5)and PM_(10)during the study period were 64±38 and 89±49μg/m~3,respectively,and NO_(2)and particulate matter were high compared with most other regions of China.The Fecontaining particles were divided into seven categories with different mass spectra,sources and aging characteristics.The highest contribution was from Fe mixed with carbonaceous components(Fe-C,23.1%)particles.Fe was more mixed with sulfate than nitrate and therefore the contribution of Fe mixed with sulfate(Fe-S,20.7%)particles was higher than that of Fe mixed with nitrate(Fe-N,12.5%)particles.The contributions from Fe-containing particles related to primary combustion were high in the small particle size range,whereas aged Fecontaining particles and dust-related particles were mostly found in the coarse particle size range.The air masses mainly originated from the west and east of Chengdu,and the corresponding PM_(2.5)concentrations were 79±36 and 55±36μg/m~3,respectively.The west and east air masses showed stronger contributions of Fe-containing particles related to biomass burning(Fe-B)and fossil fuel combustion(Fe-C and Fe-S)particles,respectively.The southwest area contributed the most Fe-containing particles.Future assessments of the effects of Fe-containing particles during heavy pollution period should pay more attention to Fe-C and Fe-S particles.Emission-reduction of Fe-containing particles should consider both local emissions and short-distance transmission from the surrounding areas.
基金The financial support of National Natural Science Foundationof China(nos.50443012 and 20671043)is gratefully acknowledgment.
文摘Polystyrene （PSt） microspheres with diameter of 375 nm to be used as the seeds for seeded emulsion polymerization were prepared via emulsion polymerization using potassium persulfate （KPS） as initiator in ethanol-water mixed solvents. Emulsifier-free seeded emulsion copolymerization of styrene （St） with acrylonitrile （AN） was carried out in the presence of poly（ethylene glycol） monomethoxymonomethacrylate （PEGm） macromonomer as reactive stabilizer and 2,2＇-azobisisobutyronitrile （AIBN） as initiator to obtain submicron-sized PEGm graft poly（styrene-coacrylonitrile） （PEGm-g-PSAN） composite particles with unique morphology. Scanning electron microscopy （SEM） indicated that St and AN together contributed to forming the unusual morphology. The concentration of St and AN, total monomer concentration, initiator type and the monomer adding method remarkably affected the morphology of the composite polymer particles.
基金Funded by the Science&Technology Program of Fujian Province(No.2017H0018)
文摘In the presence of titanium dioxide powder, cross-linking reaction between commercial polyvinyl alcohol(PVA)-based macromonomer and acrylic acid(AA) was initiated with potassium persulfate in an emulsifying system. As a result, PVA-AA/TiO2 composite gel particles were obtained. The morphology and composition of the particles were analyzed with scanning electron microscopy(SEM), energy scattering x-ray spectroscopy(EDS), Fourier infrared spectroscopy(FTIR), and thermogravimetric analysis(TGA). The analysis results confirmed that the particles were the expected ones. TiO2 was dispersed homogeneously within the spheroidal particles. Compared to the control gel, the composite gel particles not only contained Ti element but also showed higher thermal stability. In addition, the photo-catalytic behavior of the particles for the degradation of methyl orange contained in aqueous solution was examined. The particles exhibited photocatalytic characteristic for the degradation of the model dye, which could be modulated by simply varying the amount of cross-linking agent or TiO2. The photo-catalytic degradation percentage of methyl orange maintained at 91%-96% after using the particles three times, which indicated that TiO2 could played its role repeatedly via being fixated within polyvinyl alcohol-based gel.
基金Funded by the National Key Technology R&D Program of China(No.2008BAE60B06)Beijing Municipal Science&Technology Commission (No.Z080003032208015)
文摘Calcined kaolin/TiO2 composite particle material （CK/TCPM） was prepared with TiO2 coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction （XRD） and scanning electron microscope （SEM） were used to investigate the microstructures and morphologies, respectively. The mechanism of the mechano-chemical reaction between calcined kaolin and TiO2 was studied by infrared spectra （IR）. The results show that TiO2 coats evenly on the surfaces of calcined kaolin particles by Si-O-Ti and Al-O-Ti bonds on their interfaces. The hiding power and whiteness of CK/TCPM are 17.12 g/m^2 and 95.7%, respectively, presenting its similarity to TiO2 in pigment properties.
基金supported by the National Natural Science Foundation of China(No.51073136)the Fundamental Research Funds for the Central Universities of China(No.2010QNA4011)
文摘Polystyrene coated silica（SiO_2@PS） core-shell composite particles with averaged diameter of about 290 nm were prepared by in situ emulsion polymerization of styrene on the surface ofγ-methacryloxypropyltrimethoxysilane grafted SiO_2 nanoparticles of 20-50 nm in diameter.Rheological behavior and dispersion stability of SiO_2@PS suspension in 10 wt%PS solution were compared with suspensions of untreated SiO_2 and silane modified SiO_2 nanoparticles.Suspensions of the untreated and the silane modified SiO_2 exhibited obvious shear thinning.The SiO-2@PS suspension exhibits shear viscosity considerably smaller than suspensions of untreated and silane modified SiO_2 at low shear rates.Transmission electron microscopy showed that the composite particles can uniformly and stably disperse in PS solution compared to other suspensions,implying that the PS shell can effectively enhance the particle compatibility with PS macromolecules in solution.
基金supported by National Integrate Circuit Research Program of China (Nos.2011ZX02704-002,2009ZX02030-001)National Natural Science Foundation of China (No.51205387)Science and Technology Council of Shanghai (Nos.11nm0500300,10QB1403600)
文摘In this paper, a facile synthesis of 100 nm commercial colloid silica coated with nano-ceria core-shell composite particles by the precipitation method using ammonium cerium nitrate and urea as a precipitator with polyvinylpyrrolidone （PVP） as an assistant was briefly introduced. The results showed that the colloid silica was surrounded by nano-ceria uniformly forming the core-shell composite particles. The synthesis process was further discussed and optimized. It was found that the type and quantity of surfactant played a key role in the process. PVP connected the surface of colloid silica and that of the ceria precursor.
文摘By using SrTiO 3/PANI as a dispersed phase and silicone oil as a dispersion medium, the rheological characteristic of the dispersion medium under an electric field and the ERF performances of the mixture of SrTiO 3/PANI composite particles and silicone oil under different dispersed phase consistencies and different medium viscosities have been investigated. The measurements of the rheological characteristic, that is the shear stress of ERF, under shearing flow were performed with a Couette-type rheometer manufactured by HAAKE. It is proved that the rheological characteristic of the dispersion medium follows Newtonian fluid viscosity law and the ERF rheological characteristic of the mixture of the dispersion medium and dispersed phase obeys Bingham fluid model under electric field. The experimental result shows that the effects of different phase consistencies and different dispersion medium viscosities on ERF performances are great. The testing expressions of shear stress vs. electric field under different conditions have been obtained by polynomial fit, which is the theory foundation of application in engineering.
