In order to effectively analyse the multivariate time series data of complex process,a generic reconstruction technology based on reduction theory of rough sets was proposed,Firstly,the phase space of multivariate tim...In order to effectively analyse the multivariate time series data of complex process,a generic reconstruction technology based on reduction theory of rough sets was proposed,Firstly,the phase space of multivariate time series was originally reconstructed by a classical reconstruction technology.Then,the original decision-table of rough set theory was set up according to the embedding dimensions and time-delays of the original reconstruction phase space,and the rough set reduction was used to delete the redundant dimensions and irrelevant variables and to reconstruct the generic phase space,Finally,the input vectors for the prediction of multivariate time series were extracted according to generic reconstruction results to identify the parameters of prediction model.Verification results show that the developed reconstruction method leads to better generalization ability for the prediction model and it is feasible and worthwhile for application.展开更多
Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of productio...Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.展开更多
Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite a...Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.展开更多
To control the tri-modal microstructure and performance,a prediction model of tri-modal microstructure in the isothermal local loading forming of titanium alloy was developed.The staged isothermal local loading experi...To control the tri-modal microstructure and performance,a prediction model of tri-modal microstructure in the isothermal local loading forming of titanium alloy was developed.The staged isothermal local loading experiment on TA15alloy indicates that there exist four important microstructure evolution phenomena in the development of tri-modal microstructure,i.e.,the generation of lamellarα,content variation of equiaxedα,spatial orientation change of lamellarαand globularization of lamellarα.Considering the laws of these microstructure phenomena,the microstructure model was established to correlate the parameters of tri-modal microstructure and processing conditions.Then,the developed microstructure model was integrated with finite element(FE)model to predict the tri-modal microstructure in the isothermal local loading forming.Its reliability and accuracy were verified by the microstructure observation at different locations of sample.Good agreements between the predicted and experimental results suggest that the developed microstructure model and its combination with FE model are effective in the prediction of tri-modal microstructure in the isothermal local loading forming of TA15alloy.展开更多
Process optimization in equation-oriented(EO)modeling environments favors the gradient-based optimization algorithms by their abilities to provide accurate Jacobian matrices via automatic or symbolic differentiation.H...Process optimization in equation-oriented(EO)modeling environments favors the gradient-based optimization algorithms by their abilities to provide accurate Jacobian matrices via automatic or symbolic differentiation.However,computational inefficiencies including that in initial-point-finding for Newton type methods have significantly limited its application.Recently,progress has been made in using a pseudo-transient(PT)modeling method to address these difficulties,providing a fresh way forward in EO-based optimization.Nevertheless,research in this area remains open,and challenges need to be addressed.Therefore,understanding the state-of-the-art research on the PT method,its principle,and the strategies in composing effective methodologies using the PT modeling method is necessary for further developing EO-based methods for process optimization.For this purpose,the basic concepts for the PT modeling and the optimization framework based on the PT model are reviewed in this paper.Several typical applications,e.g.,complex distillation processes,cryogenic processes,and optimizations under uncertainty,are presented as well.Finally,we identify several main challenges and give prospects for the development of the PT based optimization methods.展开更多
Based on the comparison of several methods of time series predicting, this paper points out that it is necessary to use dynamic neural network in modeling of complex production process. Because self feedback and mutua...Based on the comparison of several methods of time series predicting, this paper points out that it is necessary to use dynamic neural network in modeling of complex production process. Because self feedback and mutual feedback are adopted among nodes at the same layer in Elman network, it has stronger ability of dynamic approximation, and can describe any non linear dynamic system. After the structure and mathematical description being given, dynamic back propagation (BP) algorithm of training weights of Elman neural network is deduced. At last, the network is used to predict ash content of black amber in jigging production process. The results show that this neural network is powerful in predicting and suitable for modeling, predicting, and controling of complex production process.展开更多
Radio frequency identification(RFID) enabled retail store management needs workflow optimization to facilitate real-time decision making. In this paper, complex event processing(CEP) based RFID-enabled retail store ma...Radio frequency identification(RFID) enabled retail store management needs workflow optimization to facilitate real-time decision making. In this paper, complex event processing(CEP) based RFID-enabled retail store management is studied, particularly focusing on automated shelf replenishment decisions. We define different types of event queries to describe retailer store workflow action over the RFID data streams on multiple tagging levels(e.g., item level and container level). Non-deterministic finite automata(NFA)based evaluation models are used to detect event patterns. To manage pattern match results in the process of event detection, optimization algorithm is applied in the event model to share event detection results. A simulated RFID-enabled retail store is used to verify the effectiveness of the method, experiment results show that the algorithm is effective and could optimize retail store management workflow.展开更多
The drift parameter estimation problem of the complex Ornstein-Uhlenbeck process driven by a complexα-stable motion is considered.Based on discrete observations,an estimator of the unknown drift parameter is construc...The drift parameter estimation problem of the complex Ornstein-Uhlenbeck process driven by a complexα-stable motion is considered.Based on discrete observations,an estimator of the unknown drift parameter is constructed by using the least squares method.Moreover,the strong consistency and the asymptotic distribution of the least squares estimator are derived under some assumptions.展开更多
Complex event processing (CEP) can extract meaningful events for real-time locating system (RTLS) applications. To identify complex event accurately in RTLS, we propose a new RFID complex event processing method GEEP,...Complex event processing (CEP) can extract meaningful events for real-time locating system (RTLS) applications. To identify complex event accurately in RTLS, we propose a new RFID complex event processing method GEEP, which is based on the timed automata (TA) theory. By devising RFID locating application into complex events, we model the timing diagram of RFID data streams based on the TA. We optimize the constraint of the event streams and propose a novel method to derive the constraint between objects, as well as the constraint between object and location. Experiments prove the proposed method reduces the cost of RFID complex event processing, and improves the efficiency of the RTLS.展开更多
Identifying influential nodes in complex networks is of both theoretical and practical importance. Existing methods identify influential nodes based on their positions in the network and assume that the nodes are homo...Identifying influential nodes in complex networks is of both theoretical and practical importance. Existing methods identify influential nodes based on their positions in the network and assume that the nodes are homogeneous. However, node heterogeneity （i.e., different attributes such as interest, energy, age, and so on ） ubiquitously exists and needs to be taken into consideration. In this paper, we conduct an investigation into node attributes and propose a graph signal pro- cessing based centrality （GSPC） method to identify influential nodes considering both the node attributes and the network topology. We first evaluate our GSPC method using two real-world datasets. The results show that our GSPC method effectively identifies influential nodes, which correspond well with the underlying ground truth. This is compatible to the previous eigenvector centrality and principal component centrality methods under circumstances where the nodes are homogeneous. In addition, spreading analysis shows that the GSPC method has a positive effect on the spreading dynamics.展开更多
Based on the capture force field potential model and the adiabatic invariant proposed by Bates, adopting improved average dipole orientation (IADO) theory, the force constants between transition metal ions and benzene...Based on the capture force field potential model and the adiabatic invariant proposed by Bates, adopting improved average dipole orientation (IADO) theory, the force constants between transition metal ions and benzene (bz) and also a series of inner-sphere reoganization energy (REin) were calculated. The reasons for the differences between theoretical predictions and experimental results were discussed.展开更多
The dynamic characteristic of complex network failure and recovery is one of the main research topics in complex networks. Real world systems such as traffic jams and Internet recovery could be described by the comple...The dynamic characteristic of complex network failure and recovery is one of the main research topics in complex networks. Real world systems such as traffic jams and Internet recovery could be described by the complex network theory. We propose a model to study the recovery process in complex networks. Two different recovery mechanisms are considered in three kinds of networks： external recovery and internal recovery. By simulating the process of the nodes recovery in networks, it is found that the system exhibits the feature of first-order phase transition only when the external recovery is considered. Internal recovery cannot induce such a kind of transitions. As external recovery and internal recovery coexist on networks, the systems will retain the most efficient part of external recovery and internal recovery. Meanwhile, a hysteresis could be observed when increasing or decreasing the failure probability. Finally, a largest degree node protection strategy is proposed for improving the robustness of networks.展开更多
The intramolecular process of Mg ( Ⅱ ) - , Sc ( Ⅲ ) - , Y ( Ⅲ ) - , In(Ⅲ)-and Pb ( Ⅱ )-trans-1,2-cyclohexanediaminetetraacetic acid (CyDTA) complexes was studied by the method of proton dynamic NMR(DNMR). The top...The intramolecular process of Mg ( Ⅱ ) - , Sc ( Ⅲ ) - , Y ( Ⅲ ) - , In(Ⅲ)-and Pb ( Ⅱ )-trans-1,2-cyclohexanediaminetetraacetic acid (CyDTA) complexes was studied by the method of proton dynamic NMR(DNMR). The top limit of. the experimental temperature range of deuterium oxide solutions was extended from 100℃ to 167 ℃ instead of the previous 100 ℃ by using sealed, thick-walled tubes to observe experimental phenomena further. It was found that another intramolecular process, i. e. B, R (Bonded State, Rotational State) conversion, exists in these complexes formed by polyaminepolycarboxylic ligands in addition to △,A conversion and nitrogen inversion. A quantitative treatment was proposed to estimate the relative populations of acetate groups in B and R states.展开更多
The number of products used as agro-chemicals, food additives, flavors, aromas, pharmaceuticals and nutraceuticals which are made by fermentation or extraction from plants has increased significantly. Despite this gro...The number of products used as agro-chemicals, food additives, flavors, aromas, pharmaceuticals and nutraceuticals which are made by fermentation or extraction from plants has increased significantly. Despite this growth, initial predictions for a potential product purification process for these complex mixtures remains entirely experimentally based. The present work represents an initial study to demonstrate the benefits of a systematic approach. For process development of chemically well-studied systems model based process design methods are already available. Therefore the proposed approach focuses on a method for the efficient characterization of the physical properties of the key components. Once this is adequately defined, unit operations and their potential to separate the feed components can be modeled. The current state of research is discussed. Based on this evaluation the most efficient method for conceptual process development has been identified and further developed. The resulting methodology consists of model-based cost accounting accompanied by experimental model-parameter determination. The latter is carried out at in miniaturized laboratory-scale measurement cells for each unit operation using the complete original feed. The model-based modelparameter determination from these experiments is accompanied by a comprehensive error analysis. The experimental plan currently includes the determination of thermodynamic equilibrium conditions in the mixture directly from the raw material mixture. Transport kinetics and fluid dynamic parameters are first estimated from known correlations or preexisting knowledge. Later on these parameters are determined exactly in mini-plant experiments. Furthermore, biological and botanical-based guidelines are developed to identify thermodynamically favored basic operations. Finally, the developed approaches are successfully validated using two plant extracts. Firstly, it could be proven that the botanical pre-selection can reduce the experimental plan significantly. Secondly, it was shown that the experimental equilibrium data of the kinetics and fluid dynamics can have a significant impact on the separation costs. Therefore, detailed rigorous modeling approaches have to be chosen instead of short-cut methods in order to make any valid process development conclusions or to further optimize the system.展开更多
Nanometer ZrO2 - 8% Y2O3 (mole fraction, % ) powders were prepared by the EDTA (ethylenediaminetetraacetic acid) sol-gel process. Effects of the addition of ethylene glycol on agglomerate control was investigated. The...Nanometer ZrO2 - 8% Y2O3 (mole fraction, % ) powders were prepared by the EDTA (ethylenediaminetetraacetic acid) sol-gel process. Effects of the addition of ethylene glycol on agglomerate control was investigated. The results showed that because of the replacement of hydrogen bonds with ethylene glycol in the polymerized gel, gel stabilization and homogeneity were improved and close approach of gel particles was prevented, which led to reduction of hard agglomerates to some extent. Calcined at 4OO t for 2 h and 700 C for 2 h, the powders had a specific surface area of 35 m2/g, average particle size of 28 nm, and median particle size (d50) of 0. 44um with very sharp distribution, mostly being soft agglomerates.展开更多
The copolymerization process of triphenylmethyl methacrylate (TrMA) and methylmethacrylate (MMA) using chiral anionic complex initiator (-) SP-FlLi (Scheme 1) has beenstudied in toluene and THF, respectively. The copo...The copolymerization process of triphenylmethyl methacrylate (TrMA) and methylmethacrylate (MMA) using chiral anionic complex initiator (-) SP-FlLi (Scheme 1) has beenstudied in toluene and THF, respectively. The copolymer obtained in toluene possessed muchhigher specific rotation than that in THF. These copolymers have shown a tendency to a random and a like alternating structure, respectively.展开更多
Based on an analysis of the role of industrial control and optimization technologies in the Industrial Revolution,as well as the current situation and existing problems of operational decision-making(ODM)for industria...Based on an analysis of the role of industrial control and optimization technologies in the Industrial Revolution,as well as the current situation and existing problems of operational decision-making(ODM)for industrial process,this paper introduces the concept of intelligent ODM in industrial process,shapes its future directions,and highlights key technical challenges.By the tight conjoining of and coordination between industrial artificial intelligence(AI)with industrial control and optimization technologies,as well as the Industrial Internet with industrial computer management and control systems,an intelligent operational optimization decision-making methodology is proposed for complex industrial process.The intelligent ODM methodology and its successful application demonstrate that the tight conjoining of and coordination between next-generation information technologies with industrial control and optimization technologies will promote the development of industrial intelligent ODM.Finally,main research directions and ideas are outlined for realizing intelligent ODM in industrial process.展开更多
In this article, some properties of complex Wiener-It? multiple integrals and complex Ornstein-Uhlenbeck operators and semigroups are obtained. Those include Stroock’s formula, Hu-Meyer formula, Clark-Ocone formula, ...In this article, some properties of complex Wiener-It? multiple integrals and complex Ornstein-Uhlenbeck operators and semigroups are obtained. Those include Stroock’s formula, Hu-Meyer formula, Clark-Ocone formula, and the hypercontractivity of complex Ornstein-Uhlenbeck semigroups. As an application, several expansions of the fourth moments of complex Wiener-It? multiple integrals are given.展开更多
Intra-pulse characteristics of different radar emitter signals reflect on signal waveform by way of changing frequency, phase and amplitude. A novel approach was proposed to extract complexity features of radar emitte...Intra-pulse characteristics of different radar emitter signals reflect on signal waveform by way of changing frequency, phase and amplitude. A novel approach was proposed to extract complexity features of radar emitter signals in a wide range of signal-to-noise ratio (SNR), and radial basis probability neural network (RBPNN) was used to recognize different radar emitter signals. Complexity features, including Lempel-Ziv complexity (LZC) and correlation dimension (CD), can measure the complexity and irregularity of signals, which mirrors the intra-pulse modulation laws of radar emitter signals. In an experiment, LZC and CD features of 10 typical radar emitter signals were extracted and RBPNN was applied to identify the 10 radar emitter signals. Simulation results show that the proposed approach is effective and has good application values because average accurate recognition rate is high when SNR varies in a wide range.展开更多
基金Project(61025015) supported by the National Natural Science Funds for Distinguished Young Scholars of ChinaProject(21106036) supported by the National Natural Science Foundation of China+2 种基金Project(200805331103) supported by Research Fund for the Doctoral Program of Higher Education of ChinaProject(NCET-08-0576) supported by Program for New Century Excellent Talents in Universities of ChinaProject(11B038) supported by Scientific Research Fund for the Excellent Youth Scholars of Hunan Provincial Education Department,China
文摘In order to effectively analyse the multivariate time series data of complex process,a generic reconstruction technology based on reduction theory of rough sets was proposed,Firstly,the phase space of multivariate time series was originally reconstructed by a classical reconstruction technology.Then,the original decision-table of rough set theory was set up according to the embedding dimensions and time-delays of the original reconstruction phase space,and the rough set reduction was used to delete the redundant dimensions and irrelevant variables and to reconstruct the generic phase space,Finally,the input vectors for the prediction of multivariate time series were extracted according to generic reconstruction results to identify the parameters of prediction model.Verification results show that the developed reconstruction method leads to better generalization ability for the prediction model and it is feasible and worthwhile for application.
文摘Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.
基金Supported by National Key Research and Development Program(Grant No.2024YFB3312700)National Natural Science Foundation of China(Grant No.52405541)the Changzhou Municipal Sci&Tech Program(Grant No.CJ20241131)。
文摘Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.
基金Projects(51605388,51575449)supported by the National Natural Science Foundation of ChinaProject(B08040)supported by the "111" Project,China+1 种基金Project(131-QP-2015)supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),ChinaProject supported by the Open Research Fund of State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology,China
文摘To control the tri-modal microstructure and performance,a prediction model of tri-modal microstructure in the isothermal local loading forming of titanium alloy was developed.The staged isothermal local loading experiment on TA15alloy indicates that there exist four important microstructure evolution phenomena in the development of tri-modal microstructure,i.e.,the generation of lamellarα,content variation of equiaxedα,spatial orientation change of lamellarαand globularization of lamellarα.Considering the laws of these microstructure phenomena,the microstructure model was established to correlate the parameters of tri-modal microstructure and processing conditions.Then,the developed microstructure model was integrated with finite element(FE)model to predict the tri-modal microstructure in the isothermal local loading forming.Its reliability and accuracy were verified by the microstructure observation at different locations of sample.Good agreements between the predicted and experimental results suggest that the developed microstructure model and its combination with FE model are effective in the prediction of tri-modal microstructure in the isothermal local loading forming of TA15alloy.
基金supported by the National Natural Science Foundation of China(21978203,21676183).
文摘Process optimization in equation-oriented(EO)modeling environments favors the gradient-based optimization algorithms by their abilities to provide accurate Jacobian matrices via automatic or symbolic differentiation.However,computational inefficiencies including that in initial-point-finding for Newton type methods have significantly limited its application.Recently,progress has been made in using a pseudo-transient(PT)modeling method to address these difficulties,providing a fresh way forward in EO-based optimization.Nevertheless,research in this area remains open,and challenges need to be addressed.Therefore,understanding the state-of-the-art research on the PT method,its principle,and the strategies in composing effective methodologies using the PT modeling method is necessary for further developing EO-based methods for process optimization.For this purpose,the basic concepts for the PT modeling and the optimization framework based on the PT model are reviewed in this paper.Several typical applications,e.g.,complex distillation processes,cryogenic processes,and optimizations under uncertainty,are presented as well.Finally,we identify several main challenges and give prospects for the development of the PT based optimization methods.
文摘Based on the comparison of several methods of time series predicting, this paper points out that it is necessary to use dynamic neural network in modeling of complex production process. Because self feedback and mutual feedback are adopted among nodes at the same layer in Elman network, it has stronger ability of dynamic approximation, and can describe any non linear dynamic system. After the structure and mathematical description being given, dynamic back propagation (BP) algorithm of training weights of Elman neural network is deduced. At last, the network is used to predict ash content of black amber in jigging production process. The results show that this neural network is powerful in predicting and suitable for modeling, predicting, and controling of complex production process.
基金supported by National Social Science Fund (No. 16CTQ013)the Application Fundamental Research Foundation of Sichuan Province, China (No. 2017JY0011)the Key Project of Sichuan Provincial Department of Education, China (No. 2017GZ0333)
文摘Radio frequency identification(RFID) enabled retail store management needs workflow optimization to facilitate real-time decision making. In this paper, complex event processing(CEP) based RFID-enabled retail store management is studied, particularly focusing on automated shelf replenishment decisions. We define different types of event queries to describe retailer store workflow action over the RFID data streams on multiple tagging levels(e.g., item level and container level). Non-deterministic finite automata(NFA)based evaluation models are used to detect event patterns. To manage pattern match results in the process of event detection, optimization algorithm is applied in the event model to share event detection results. A simulated RFID-enabled retail store is used to verify the effectiveness of the method, experiment results show that the algorithm is effective and could optimize retail store management workflow.
基金Key Natural Science Foundation of Anhui Education Commission,China(No.KJ2017A568)Natural Science Foundation of Anhui Province,China(No.1808085MA02)Natural Science Foundation of Bengbu University,China(No.2018CXY045)
文摘The drift parameter estimation problem of the complex Ornstein-Uhlenbeck process driven by a complexα-stable motion is considered.Based on discrete observations,an estimator of the unknown drift parameter is constructed by using the least squares method.Moreover,the strong consistency and the asymptotic distribution of the least squares estimator are derived under some assumptions.
文摘Complex event processing (CEP) can extract meaningful events for real-time locating system (RTLS) applications. To identify complex event accurately in RTLS, we propose a new RFID complex event processing method GEEP, which is based on the timed automata (TA) theory. By devising RFID locating application into complex events, we model the timing diagram of RFID data streams based on the TA. We optimize the constraint of the event streams and propose a novel method to derive the constraint between objects, as well as the constraint between object and location. Experiments prove the proposed method reduces the cost of RFID complex event processing, and improves the efficiency of the RTLS.
基金supported by the National Natural Science Foundation of China(Grant No.61231010)the Fundamental Research Funds for the Central Universities,China(Grant No.HUST No.2012QN076)
文摘Identifying influential nodes in complex networks is of both theoretical and practical importance. Existing methods identify influential nodes based on their positions in the network and assume that the nodes are homogeneous. However, node heterogeneity （i.e., different attributes such as interest, energy, age, and so on ） ubiquitously exists and needs to be taken into consideration. In this paper, we conduct an investigation into node attributes and propose a graph signal pro- cessing based centrality （GSPC） method to identify influential nodes considering both the node attributes and the network topology. We first evaluate our GSPC method using two real-world datasets. The results show that our GSPC method effectively identifies influential nodes, which correspond well with the underlying ground truth. This is compatible to the previous eigenvector centrality and principal component centrality methods under circumstances where the nodes are homogeneous. In addition, spreading analysis shows that the GSPC method has a positive effect on the spreading dynamics.
文摘Based on the capture force field potential model and the adiabatic invariant proposed by Bates, adopting improved average dipole orientation (IADO) theory, the force constants between transition metal ions and benzene (bz) and also a series of inner-sphere reoganization energy (REin) were calculated. The reasons for the differences between theoretical predictions and experimental results were discussed.
基金Supported by the National Natural Science foundation of China under Grant No 11474221
文摘The dynamic characteristic of complex network failure and recovery is one of the main research topics in complex networks. Real world systems such as traffic jams and Internet recovery could be described by the complex network theory. We propose a model to study the recovery process in complex networks. Two different recovery mechanisms are considered in three kinds of networks： external recovery and internal recovery. By simulating the process of the nodes recovery in networks, it is found that the system exhibits the feature of first-order phase transition only when the external recovery is considered. Internal recovery cannot induce such a kind of transitions. As external recovery and internal recovery coexist on networks, the systems will retain the most efficient part of external recovery and internal recovery. Meanwhile, a hysteresis could be observed when increasing or decreasing the failure probability. Finally, a largest degree node protection strategy is proposed for improving the robustness of networks.
基金Supported by the National Natural Science Foundation of China
文摘The intramolecular process of Mg ( Ⅱ ) - , Sc ( Ⅲ ) - , Y ( Ⅲ ) - , In(Ⅲ)-and Pb ( Ⅱ )-trans-1,2-cyclohexanediaminetetraacetic acid (CyDTA) complexes was studied by the method of proton dynamic NMR(DNMR). The top limit of. the experimental temperature range of deuterium oxide solutions was extended from 100℃ to 167 ℃ instead of the previous 100 ℃ by using sealed, thick-walled tubes to observe experimental phenomena further. It was found that another intramolecular process, i. e. B, R (Bonded State, Rotational State) conversion, exists in these complexes formed by polyaminepolycarboxylic ligands in addition to △,A conversion and nitrogen inversion. A quantitative treatment was proposed to estimate the relative populations of acetate groups in B and R states.
文摘The number of products used as agro-chemicals, food additives, flavors, aromas, pharmaceuticals and nutraceuticals which are made by fermentation or extraction from plants has increased significantly. Despite this growth, initial predictions for a potential product purification process for these complex mixtures remains entirely experimentally based. The present work represents an initial study to demonstrate the benefits of a systematic approach. For process development of chemically well-studied systems model based process design methods are already available. Therefore the proposed approach focuses on a method for the efficient characterization of the physical properties of the key components. Once this is adequately defined, unit operations and their potential to separate the feed components can be modeled. The current state of research is discussed. Based on this evaluation the most efficient method for conceptual process development has been identified and further developed. The resulting methodology consists of model-based cost accounting accompanied by experimental model-parameter determination. The latter is carried out at in miniaturized laboratory-scale measurement cells for each unit operation using the complete original feed. The model-based modelparameter determination from these experiments is accompanied by a comprehensive error analysis. The experimental plan currently includes the determination of thermodynamic equilibrium conditions in the mixture directly from the raw material mixture. Transport kinetics and fluid dynamic parameters are first estimated from known correlations or preexisting knowledge. Later on these parameters are determined exactly in mini-plant experiments. Furthermore, biological and botanical-based guidelines are developed to identify thermodynamically favored basic operations. Finally, the developed approaches are successfully validated using two plant extracts. Firstly, it could be proven that the botanical pre-selection can reduce the experimental plan significantly. Secondly, it was shown that the experimental equilibrium data of the kinetics and fluid dynamics can have a significant impact on the separation costs. Therefore, detailed rigorous modeling approaches have to be chosen instead of short-cut methods in order to make any valid process development conclusions or to further optimize the system.
文摘Nanometer ZrO2 - 8% Y2O3 (mole fraction, % ) powders were prepared by the EDTA (ethylenediaminetetraacetic acid) sol-gel process. Effects of the addition of ethylene glycol on agglomerate control was investigated. The results showed that because of the replacement of hydrogen bonds with ethylene glycol in the polymerized gel, gel stabilization and homogeneity were improved and close approach of gel particles was prevented, which led to reduction of hard agglomerates to some extent. Calcined at 4OO t for 2 h and 700 C for 2 h, the powders had a specific surface area of 35 m2/g, average particle size of 28 nm, and median particle size (d50) of 0. 44um with very sharp distribution, mostly being soft agglomerates.
文摘The copolymerization process of triphenylmethyl methacrylate (TrMA) and methylmethacrylate (MMA) using chiral anionic complex initiator (-) SP-FlLi (Scheme 1) has beenstudied in toluene and THF, respectively. The copolymer obtained in toluene possessed muchhigher specific rotation than that in THF. These copolymers have shown a tendency to a random and a like alternating structure, respectively.
基金supported by the Research Program of the Liaoning Liaohe Laboratory(LLL23ZZ-05-012)China Academy of Engineering Institute of Land Cooperation Consulting Project(2023-DFZD-60-02)+3 种基金the Key Research and Development Program of Liaoning Province(2023JH26/10200011)the National Natural Science Foundation of China(61991404)the National Key Research and Development Program of China(2024YFB3309700)the Science and Technology Major Project 2024 of Liaoning Province(2024JH1/11700048).
文摘Based on an analysis of the role of industrial control and optimization technologies in the Industrial Revolution,as well as the current situation and existing problems of operational decision-making(ODM)for industrial process,this paper introduces the concept of intelligent ODM in industrial process,shapes its future directions,and highlights key technical challenges.By the tight conjoining of and coordination between industrial artificial intelligence(AI)with industrial control and optimization technologies,as well as the Industrial Internet with industrial computer management and control systems,an intelligent operational optimization decision-making methodology is proposed for complex industrial process.The intelligent ODM methodology and its successful application demonstrate that the tight conjoining of and coordination between next-generation information technologies with industrial control and optimization technologies will promote the development of industrial intelligent ODM.Finally,main research directions and ideas are outlined for realizing intelligent ODM in industrial process.
基金Supported by NSFC(11871079)NSFC (11731009)Center for Statistical Science,PKU
文摘In this article, some properties of complex Wiener-It? multiple integrals and complex Ornstein-Uhlenbeck operators and semigroups are obtained. Those include Stroock’s formula, Hu-Meyer formula, Clark-Ocone formula, and the hypercontractivity of complex Ornstein-Uhlenbeck semigroups. As an application, several expansions of the fourth moments of complex Wiener-It? multiple integrals are given.
基金TheNationalDefenceFoundation (No .NEWL5 14 35QT2 2 0 4 0 1) ,theDoctoralInnovationFoundationofSWJTU ,andtheMainTeacherSponsorProgramoftheMinistryofEducationofChina (No .6 5 ,2 0 0 0 )
文摘Intra-pulse characteristics of different radar emitter signals reflect on signal waveform by way of changing frequency, phase and amplitude. A novel approach was proposed to extract complexity features of radar emitter signals in a wide range of signal-to-noise ratio (SNR), and radial basis probability neural network (RBPNN) was used to recognize different radar emitter signals. Complexity features, including Lempel-Ziv complexity (LZC) and correlation dimension (CD), can measure the complexity and irregularity of signals, which mirrors the intra-pulse modulation laws of radar emitter signals. In an experiment, LZC and CD features of 10 typical radar emitter signals were extracted and RBPNN was applied to identify the 10 radar emitter signals. Simulation results show that the proposed approach is effective and has good application values because average accurate recognition rate is high when SNR varies in a wide range.
