The ever-increasing demand for light weighted hard materials for transportation industries encouraged researchers to develop composites with excellent mechanical properties which can transform it into more economical ...The ever-increasing demand for light weighted hard materials for transportation industries encouraged researchers to develop composites with excellent mechanical properties which can transform it into more economical and eco-friendly.Reinforcing the metals with carbonaceous nanomaterials are progressively in focus due to their excellent capability to inculcate and tailor the properties of MMCs.In the present research,a hybrid nanocomposite of MWCNT-Graphene-AZ31 Mg alloy has been developed by using variable tool rotation speeds with friction stir processing(FSP).Optimized reinforcement ratio of 1.6%vol.MWCNT and 0.3%vol.of graphene have been used with variable tool rotation speeds,whereas other processing parameters are kept constant.The developed specimens were investigated using standard testing equipment for evaluating and comparing the mechanical properties on the basis of the microstructure of the processing regions and their morphological analysis,according to the ASTM standards.The obtained results revealed an improvement of 19.72%in microhardness and 77.5% of compressive strength in comparison with the base metal AZ 31 Magnesium alloy,with a tool rotational speed of 1400rpm.The values of tensile stress and percentage area reduction were recorded as less than that of the base metal matrix,but an increasing trend has been observed in the values of both with the improvement on rotational speeds of the tool.The effectual strengthening mechanisms are analyzed on the bases of SEM images and observed that discussed and found that grain refinement strengthening is the major contributor to the strength of the nanocomposite.展开更多
Based on the analysis of Adaptive Moving Target Indication(AMTI) and the signal processing of Synthetic Aperture Radar(SAR), a complete compatible system of AMTI and SAR is put forward. The compatibility and effective...Based on the analysis of Adaptive Moving Target Indication(AMTI) and the signal processing of Synthetic Aperture Radar(SAR), a complete compatible system of AMTI and SAR is put forward. The compatibility and effectiveness of this system is prcved in theory. The results of simulation show that this system not only has good ability in stationary targets imaging but also has ability in detecting moving targets under the background of strong clutter.展开更多
Ce0.8Ca0.2O1.8 (CDC82) anode material was prepared by glycine-nitrate process(GNP). Thermogravimetric(TG) analysis and differential scanning calorimetric(DSC) methods were adopted to characterize the reaction process ...Ce0.8Ca0.2O1.8 (CDC82) anode material was prepared by glycine-nitrate process(GNP). Thermogravimetric(TG) analysis and differential scanning calorimetric(DSC) methods were adopted to characterize the reaction process of CDC82 material. X-ray diffractometry(XRD), scanning electron microcopy(SEM), direct current four probe (four-probe DC) and temperature process reduce(TPR) techniques were adopted to characterize the properties of CDC82 material. After the precursor was sintered at 750 ℃ for 4 h, CDC82 material with pure-fluorite structure and nanometer size was obtained. The total conductivity of CDC82 changes little with temperature in air at 50?850 ℃ , and the maximum value is 0.04 S/cm at 750 ℃ . The total conductivity wholly becomes larger when the atmosphere changes from air to hydrogen, which greatly increases with increasing temperature and reaches the maximum value of 1.09 S/cm at 850 ℃. Some impurities such as CeMg and La2O3 exist after the mixture of CDC82 anode and La1?xSrxGa1?yMgyO3?δ (LSGM) electrolyte material is sintered at 1 200 ℃ for 15 h. The CDC82 material as anode material has excellent catalytic property for hydrogen and methane.展开更多
The weighted arithmetical mean complex judgement matrix （WAMCJM） is the most common method for aggregating group opinions, but it has a shortcoming, namely the WAMCJM of the perfectly consistent judgement matrices g...The weighted arithmetical mean complex judgement matrix （WAMCJM） is the most common method for aggregating group opinions, but it has a shortcoming, namely the WAMCJM of the perfectly consistent judgement matrices given by experts canot guarantee its perfect consistency. An upper bound of the WAMCJM＇s consistency is presented. Simultaneously, a compatibility index of judging the aggregating extent of group opinions is also introduced. The WAMCJM is of acceptable consistency and is proved provided the compatibilities of all judgement matrices given by experts are smaller than the threshold value of acceptable consistency. These conclusions are important to group decision making.展开更多
Ferroelectric materials are increasingly garnering substantial interest due to their potential applications in optical communication,optical computing,and sensing,among others.This surge in attention is largely due to...Ferroelectric materials are increasingly garnering substantial interest due to their potential applications in optical communication,optical computing,and sensing,among others.This surge in attention is largely due to recent advancements in the fabrication of high-quality thin films,the precision of domain engineering,and their strong compatibility with complementary metal–oxide–semiconductor(CMOS)processes.展开更多
Gold, nickel and copper are usually used in connector of the smart card. Since Au is expensive and Ni is an allergenic material, simulated (CES) and bibliographical work is carried out in order to replace the Au and N...Gold, nickel and copper are usually used in connector of the smart card. Since Au is expensive and Ni is an allergenic material, simulated (CES) and bibliographical work is carried out in order to replace the Au and Ni layer in smart card connectors without sacrificing reliability. During the work, mechanical and electrical properties, corrosion resistance, cost, toxicity and process compatibility of the samples have been taken into consideration. Cu alloying with Zn or Sn, Cr and stainless steel were selected for electrodeposition process. Secondly, carbides (WC, TiC, ZrC), Ti, TiN, borides (TiB2) and silicide (MoSi2) are considered as a vapour deposited materials and some Cu alloying with Al, N or Mg also considered via ion implantation processes. But, vapour deposition and implantation are high energy processes compared to the electrodeposition process, which is expensive. Therefore, electrodeposited materials such as, Cu alloys (Brass or bronze), Cr and stainless steel could be considered as promising candidate to replace the Au and Ni layer in smart card connectors.展开更多
Internet financial wealth management product(IFWMP)has recently been one of the most gained popularity.There are limited quantitative research on IFWMP which can help customers to choose products based on the signific...Internet financial wealth management product(IFWMP)has recently been one of the most gained popularity.There are limited quantitative research on IFWMP which can help customers to choose products based on the significance of each factor.In this paper,a multi-criteria decision-making model for IFWMP was developed,namely the analytic hierarchy process(AHP)which is commonly used to make decisions for unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected response to show the significance of the factors.Based on the quantified weights,the results of the research indicated that compatibility,product liquidity,perceived ease of use,and perceived usefulness affected investors purchasing behaviors and that every investor should pay great attention to.展开更多
Internet financial wealth management product(IFWMP)has recently been one of the most popularity.There is limited quantitative research on IFWMP which can helps customers to choose the products based on the significanc...Internet financial wealth management product(IFWMP)has recently been one of the most popularity.There is limited quantitative research on IFWMP which can helps customers to choose the products based on the significance of each factor.In the paper,a multi-criteria decision-making model of IFWMP was developed,namely analytic hierarchy process(AHP)which is used to make decisions to the unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected responds to show the significance of factors.Based on the quantified weights,the result of the research indicated that compatibility,product liquidity,perceived ease of use and perceived usefulness affect the investors purchasing behaviors most that every investors should pay great attention to.展开更多
文摘The ever-increasing demand for light weighted hard materials for transportation industries encouraged researchers to develop composites with excellent mechanical properties which can transform it into more economical and eco-friendly.Reinforcing the metals with carbonaceous nanomaterials are progressively in focus due to their excellent capability to inculcate and tailor the properties of MMCs.In the present research,a hybrid nanocomposite of MWCNT-Graphene-AZ31 Mg alloy has been developed by using variable tool rotation speeds with friction stir processing(FSP).Optimized reinforcement ratio of 1.6%vol.MWCNT and 0.3%vol.of graphene have been used with variable tool rotation speeds,whereas other processing parameters are kept constant.The developed specimens were investigated using standard testing equipment for evaluating and comparing the mechanical properties on the basis of the microstructure of the processing regions and their morphological analysis,according to the ASTM standards.The obtained results revealed an improvement of 19.72%in microhardness and 77.5% of compressive strength in comparison with the base metal AZ 31 Magnesium alloy,with a tool rotational speed of 1400rpm.The values of tensile stress and percentage area reduction were recorded as less than that of the base metal matrix,but an increasing trend has been observed in the values of both with the improvement on rotational speeds of the tool.The effectual strengthening mechanisms are analyzed on the bases of SEM images and observed that discussed and found that grain refinement strengthening is the major contributor to the strength of the nanocomposite.
文摘Based on the analysis of Adaptive Moving Target Indication(AMTI) and the signal processing of Synthetic Aperture Radar(SAR), a complete compatible system of AMTI and SAR is put forward. The compatibility and effectiveness of this system is prcved in theory. The results of simulation show that this system not only has good ability in stationary targets imaging but also has ability in detecting moving targets under the background of strong clutter.
基金Projects(5020400750574046) supported by the National Natural Science Foundation of ChinaProject(2005PY01-33) supported by the Natural Foundation of Yunnan Province, China
文摘Ce0.8Ca0.2O1.8 (CDC82) anode material was prepared by glycine-nitrate process(GNP). Thermogravimetric(TG) analysis and differential scanning calorimetric(DSC) methods were adopted to characterize the reaction process of CDC82 material. X-ray diffractometry(XRD), scanning electron microcopy(SEM), direct current four probe (four-probe DC) and temperature process reduce(TPR) techniques were adopted to characterize the properties of CDC82 material. After the precursor was sintered at 750 ℃ for 4 h, CDC82 material with pure-fluorite structure and nanometer size was obtained. The total conductivity of CDC82 changes little with temperature in air at 50?850 ℃ , and the maximum value is 0.04 S/cm at 750 ℃ . The total conductivity wholly becomes larger when the atmosphere changes from air to hydrogen, which greatly increases with increasing temperature and reaches the maximum value of 1.09 S/cm at 850 ℃. Some impurities such as CeMg and La2O3 exist after the mixture of CDC82 anode and La1?xSrxGa1?yMgyO3?δ (LSGM) electrolyte material is sintered at 1 200 ℃ for 15 h. The CDC82 material as anode material has excellent catalytic property for hydrogen and methane.
基金the National Natural Science Foundation of China (705250047047103570121001).
文摘The weighted arithmetical mean complex judgement matrix （WAMCJM） is the most common method for aggregating group opinions, but it has a shortcoming, namely the WAMCJM of the perfectly consistent judgement matrices given by experts canot guarantee its perfect consistency. An upper bound of the WAMCJM＇s consistency is presented. Simultaneously, a compatibility index of judging the aggregating extent of group opinions is also introduced. The WAMCJM is of acceptable consistency and is proved provided the compatibilities of all judgement matrices given by experts are smaller than the threshold value of acceptable consistency. These conclusions are important to group decision making.
基金supported by the National Natural Science Foundation of China (Grant Nos.61925505 and 62405070)"Pioneer"and"Leading Goose"R&D Program of Zhejiang Province (Grant No.2024C01112)National Key Research and Development Program of China (Grant No.2023YFB2807100).
文摘Ferroelectric materials are increasingly garnering substantial interest due to their potential applications in optical communication,optical computing,and sensing,among others.This surge in attention is largely due to recent advancements in the fabrication of high-quality thin films,the precision of domain engineering,and their strong compatibility with complementary metal–oxide–semiconductor(CMOS)processes.
文摘Gold, nickel and copper are usually used in connector of the smart card. Since Au is expensive and Ni is an allergenic material, simulated (CES) and bibliographical work is carried out in order to replace the Au and Ni layer in smart card connectors without sacrificing reliability. During the work, mechanical and electrical properties, corrosion resistance, cost, toxicity and process compatibility of the samples have been taken into consideration. Cu alloying with Zn or Sn, Cr and stainless steel were selected for electrodeposition process. Secondly, carbides (WC, TiC, ZrC), Ti, TiN, borides (TiB2) and silicide (MoSi2) are considered as a vapour deposited materials and some Cu alloying with Al, N or Mg also considered via ion implantation processes. But, vapour deposition and implantation are high energy processes compared to the electrodeposition process, which is expensive. Therefore, electrodeposited materials such as, Cu alloys (Brass or bronze), Cr and stainless steel could be considered as promising candidate to replace the Au and Ni layer in smart card connectors.
文摘Internet financial wealth management product(IFWMP)has recently been one of the most gained popularity.There are limited quantitative research on IFWMP which can help customers to choose products based on the significance of each factor.In this paper,a multi-criteria decision-making model for IFWMP was developed,namely the analytic hierarchy process(AHP)which is commonly used to make decisions for unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected response to show the significance of the factors.Based on the quantified weights,the results of the research indicated that compatibility,product liquidity,perceived ease of use,and perceived usefulness affected investors purchasing behaviors and that every investor should pay great attention to.
文摘Internet financial wealth management product(IFWMP)has recently been one of the most popularity.There is limited quantitative research on IFWMP which can helps customers to choose the products based on the significance of each factor.In the paper,a multi-criteria decision-making model of IFWMP was developed,namely analytic hierarchy process(AHP)which is used to make decisions to the unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected responds to show the significance of factors.Based on the quantified weights,the result of the research indicated that compatibility,product liquidity,perceived ease of use and perceived usefulness affect the investors purchasing behaviors most that every investors should pay great attention to.
