With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as...With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as promising technologies for mitigating grid oscillations and enhancing system flexibility.However,the excitation converters in DFVS-PSUs are prone to significant issues such as elevated common-mode voltage(CMV)and neutral-point voltage(NPV)fluctuations,which can lead to electromagnetic interference and degrade transient performance.To address these challenges,an optimized virtual space vector pulse width modulation(OVSVPWM)strategy is proposed,aiming to suppress CMV and NPV simultaneously through coordinated multi-objective control.Specifically,a dynamic feedback mechanism is introduced to adjust the balancing factor of basic vectors in the synthesized virtual small vector in real-time,achieving autonomous balancing of the NPV.To address the excessive switching actions introduced by the OVSVPWM strategy,a phase duty ratio-based sequence reconstruction method is adopted,which reduces the total number of switching actions to half of the original.A zero-level buffering scheme is employed to reconstruct the single-phase voltage-level output sequence,achieving peak CMV suppression down to udc/6.Simulation results demonstrate that the proposed strategy significantly improves electromagnetic compatibility and operational stability while maintaining high power quality.展开更多
Insulation failure significantly contributes to the unpredictable shutdown of power equipment.Compared to the partial discharge and high-frequency(HF)injection methods,the HF common-mode(CM)leakage current method offe...Insulation failure significantly contributes to the unpredictable shutdown of power equipment.Compared to the partial discharge and high-frequency(HF)injection methods,the HF common-mode(CM)leakage current method offers a non-intrusive and highly sensitive alternative.However,the detection of HF CM currents is susceptible to interference from differential-mode(DM)currents,which exhibit high-amplitude and multifrequency components during normal operation.To address this challenge,this paper proposes a double-ring current sensor based on the principle of magnetic shielding for inverter-fed machine winding insulation monitoring.The inner ring harnesses the magnetic aggregation effect to isolate the DM current magnetic field,whereas the outer ring serves as the magnetic core of the Rogowski current sensor,enabling HF CM current monitoring.First,the magnetic field distributions of the CM and DM currents were analyzed.Then,a correlation between the sensor parameters and signal-to-noise ratio of the target HF CM current was established.Finally,an experimental study was conducted on a 3-kW PMSM for verification.The results indicate that the proposed double-ring HF CM sensor can effectively mitigate DM current interference.Compared to a single-ring sensor,a reduction of approximately 40%in the DM component was achieved,which significantly enhanced the precision of online insulation monitoring.展开更多
Rectifiers with high efficiency and high power density are crucial to the stable and efficient power supply of 5G communication base stations,which deserves in-depth investigation.In general,there are two key problems...Rectifiers with high efficiency and high power density are crucial to the stable and efficient power supply of 5G communication base stations,which deserves in-depth investigation.In general,there are two key problems to be addressed:supporting both alternating current(AC)and direct current(DC)input,and minimizing the common-mode voltage as well as leakage current for safety reasons.In this paper,a hybrid five-level single-phase rectifier is proposed.A five-level topology is adopted in the upper arm,and a half-bridge diode topology is adopted in the lower arm.A dual closed-loop control strategy and a flying capacitor voltage regulation method are designed accordingly so that the compatibility of both AC and DC input is realized with low common voltage and small passive devices.Simulation and experimental results demonstrate the effectiveness and performance of the proposed rectifier.展开更多
The balanced operational amplifier including its merits and designing methods is discussed by comparing its performance to a conventional differential output amplifier when used in a single balanced stage. A balanced ...The balanced operational amplifier including its merits and designing methods is discussed by comparing its performance to a conventional differential output amplifier when used in a single balanced stage. A balanced OTA circuit design is also presented.展开更多
Carrier-based pulse width modulation (CBPWM) and virtual space vector pulse width modulation (VSVPWM) are briefly reviewed for neutral-point-clamped three-level inverters (NPC TLI). A new modulation strategy referred ...Carrier-based pulse width modulation (CBPWM) and virtual space vector pulse width modulation (VSVPWM) are briefly reviewed for neutral-point-clamped three-level inverters (NPC TLI). A new modulation strategy referred to as N3S_CBPWM is then proposed to simultaneously consider multiple goals, such as the-neutral-point voltage (NPV) balance, switching loss, and common-mode voltage (CMV) reduction. For N3S_CBPWM in each switching cycle, the three-phase switching actions are zero, one, and two. In addition, the constraint conditions of the modulation waves are provided based on the reduction of the CMV. Subsequently, N3S_CBPWM, CBPWM, and VSVPWM are compared in terms of the NPV balance capability, switching loss, and CMV reduction. Finally, the feasibility and superiority of the proposed N3S_CBPWM are verified experimentally.展开更多
A feedforward current-sense current-compensation(CSCC)active EMI filter(AEF)for the direct current-side common-mode(CM)electromagnetic interference(EMI)suppression of high-power electric vehicle traction inverters is ...A feedforward current-sense current-compensation(CSCC)active EMI filter(AEF)for the direct current-side common-mode(CM)electromagnetic interference(EMI)suppression of high-power electric vehicle traction inverters is analyzed and designed.A detailed design of the components with formulas is provided based on an analysis of the CSCC AEF,including the CSCC AEF topology and its implementation.The feedforward active filter stage was implemented using a simple current transformer and a small circuit board.Only a small passive filter with a high resonant frequency is required for high-frequency noise attenuation.The filter’s effectiveness was validated using the simulation results and experimental measurements.展开更多
Induction motor drive systems fed by cables are widely used in industrial applications. However, high-frequency switching of power devices will cause common-mode（CM） voltages during operation, leading to serious CM ...Induction motor drive systems fed by cables are widely used in industrial applications. However, high-frequency switching of power devices will cause common-mode（CM） voltages during operation, leading to serious CM currents in the motor drive systems. CM currents through the cables and motors in the drive systems can cause electromagnetic interference（EMI） with the surrounding electronic equipment and shorten the life of induction motors. Therefore, it is necessary to analyze the CM currents in motor drive systems. In this paper, high-frequency models of unshielded and shielded power cables are formulated. The frequency-dependent effects and mutual inductances of the cables are taken into account. The power cable parameters are extracted by the finite element method and validated by measurements. High-frequency models of induction motors and inverters are introduced from existing works. The CM currents at the motor and inverter terminals are obtained, and the influence of the cable length and cable type on the CM currents is analyzed. There is a good agreement between the experimental results and the CM currents predicted by the proposed models.展开更多
With the increase in the switching frequency and power density,DC-DC converters encounter more severe electromagnetic interference(EMI)problems.To suppress the common-mode EMI generated by converters,as well as mainta...With the increase in the switching frequency and power density,DC-DC converters encounter more severe electromagnetic interference(EMI)problems.To suppress the common-mode EMI generated by converters,as well as maintain the high-power-density of converters,the active EMI filter(AEF)has attracted increasing interest owing to its small volume.The EMI suppression effect of the common single-stage single-sense single-injection AEF is confined because of the limited insertion loss,and the volume of the multi-stage AEF will be bulky.To solve this problem,this paper proposes a compact dual-current-injection current-sense current-compensation(DCJ-CSCC)AEF to increase the insertion loss in the entire conducted EMI frequency band,as well as considering the volume of the AEF.The structure and operating principle of the proposed AEF are introduced.Finally,taking a boost converter as an example,the effectiveness and advantages of the proposed DCJ-CSCC AEF were verified through a simulation and experiment,the results show that the proposed AEF has a better EMI suppression effect on the entire conducted EMI frequency band with a similar volume compared with existing single-injection feedforward current-sense current-compensation(FF-CSCC)and feedback current-sense current-compensation(FB-CSCC)AEFs.This paper provides a new selection for EMI suppression in DC-DC converters.展开更多
A compact common-mode filter is proposed to suppress common-mode noise for application of high-speed differential signal traces. The filter adopts one big C-shaped defected ground structure （DGS） cell in the left of...A compact common-mode filter is proposed to suppress common-mode noise for application of high-speed differential signal traces. The filter adopts one big C-shaped defected ground structure （DGS） cell in the left of ground plane and two small C-shaped DGS cells with opposite direction in the right of ground plane. Because these DGS cells have different dimensions, the filter has three adjacent equivalent resonant points, which can suppress wideband common-mode noise effectively. The left C-shaped DGS and its adjacent C-shaped DGS cell form an approximate closed structure, which can efficiently reduce the influence of the mutual capacitance. The filter provides a common-mode suppression from 3.6 GHz to 14.4 GHz over 15 dB while it has a small size of 10 minx 10 mm. The fractional bandwidth of the filter is 120%, and the differential signals still keep good signal integrity. The experimental results are in good agreement with the simulated results.展开更多
The common-mode current is an important indicator with transformerless photovoltaic inverters.However,up to now,there is not an accurate method to predict common-mode current in the inverter design process,resulting f...The common-mode current is an important indicator with transformerless photovoltaic inverters.However,up to now,there is not an accurate method to predict common-mode current in the inverter design process,resulting from inappropriate device selection or exceeded the expected common-mode current.In order to solve this problem,this paper proposes an accurate common-mode current prediction method based on graph theory for transformerless photovoltaic inverters.In this paper,the mathematic model of the common-mode current is derived using graph theory analysis method in the full-bridge topology,and it is used to predict common-mode current.The validity and correctness of the proposed prediction method are validated by simulation and experiment.The oscillation frequency and amplitude can be predicted by the proposed common-mode prediction method,whereas the traditional common-mode analysis method cannot.This paper provides a novel way to predict and analyze common-mode current in the transformerless photovoltaic inverters.展开更多
An effective method to broaden the rejection bandwidth of dump-shaped defected ground structure(DGS) filter design is proposed in the paper. One traditional dumbbell-shaped DGS is split by using one split ring, and re...An effective method to broaden the rejection bandwidth of dump-shaped defected ground structure(DGS) filter design is proposed in the paper. One traditional dumbbell-shaped DGS is split by using one split ring, and reconstructed into two different compact DGSs. The distance between both of the DGSs is so close that there exists mutual inductance, which can be utilized to broaden the rejection bandwidth effectively. The effect of different parameters of the split ring on the rejection bandwidth and depth of the filter is analyzed. Simulated results demonstrate that, with the same area of 5.5mm by 10 mm, rejection bandwidth of the proposed filter is from 4.4 GHz to 10.5 GHz for the common-mode noise(CM) while that of the traditional dumbbell-shaped DGS is from 5.3 GHz to 7.3 GHz. Compared to other schematics adopting multiple DGS to broaden bandwidth, it can broaden the bandwidth by dividing the existed DGS into multiple parts and reconstructing a new filter. The experimental results show good agreement with simulated results.展开更多
Solid-state transformers(SSTs)have been widely used in many areas owing to their advantages of high-frequency isolation and high power density.However,high-frequency switching causes severe electromagnetic interferenc...Solid-state transformers(SSTs)have been widely used in many areas owing to their advantages of high-frequency isolation and high power density.However,high-frequency switching causes severe electromagnetic interference(EMI)problems.Particularly,the common-mode(CM)EMI caused by the switching of the dual active bridge(DAB)converter is conducted through the parasitic capacitances in the high-frequency transformer and impacts the system reliability.With the understanding of the CM EMI model in SSTs,CM EMI mitigation methods have been studied.For passive mitigation,the coupled inductor can be integrated with the phase-shift inductor function to reduce CM EMI.For active mitigation,variations in the DAB switching frequency can help reduce the CM EMI peak.An active EMI filter can also be designed to sample and compensate for CM EMI.Using these methods,CM EMI can be reduced in SSTs.展开更多
Machine stator winding insulation degradation is one of the main results of machine aging.It is non-negligible once this degradation process becomes asymmetric between phases.The traditional way to determine the insul...Machine stator winding insulation degradation is one of the main results of machine aging.It is non-negligible once this degradation process becomes asymmetric between phases.The traditional way to determine the insulation state of health is a partial discharge test.However,this method requires the system offline,which causes production loss and extra administrative burden.This paper presents an idea for better characterizing the insulation machine’s state of health using common-mode(CM)behavior in the machine-drive system.With the help of circuit decomposition methods and modeling tools,the CM quantities due to asymmetric aging show a unique characteristic that distinguishes itself from other differential-mode(DM)quantities in the equivalent circuit.It is shown effective to represent the asymmetric aging effect from the detection of system leakage current.This paper provides an analytical method to quantify this characteristic from mathematical approaches,and a proper approximation has been made on the CM equivalent model(CEM)such that the CM behavior is accurately characterized.The proposed method will serve the purpose of predicting machine abnormal behavior using the simple RLC circuit.Researchers can adapt this method to quantify and characterize the machine insulation state of health(SOH).展开更多
In this paper,the common-mode radiation characteristic of the connection between a cable and a conductor is analyzed by the electric field integral function(EFIF)and the method of moment(MoM).The RWG basis function is...In this paper,the common-mode radiation characteristic of the connection between a cable and a conductor is analyzed by the electric field integral function(EFIF)and the method of moment(MoM).The RWG basis function is adopted as the conductor basis function,the pulse basis function as the wire basis function and the juncture employs Costa basis function.A scheme of singular region separation is proposed to overcome the integration singularity of juncture matrix elements.Some new conclusions of the common-mode radiation characteristics with the metal case are obtained by numeration.展开更多
文摘With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as promising technologies for mitigating grid oscillations and enhancing system flexibility.However,the excitation converters in DFVS-PSUs are prone to significant issues such as elevated common-mode voltage(CMV)and neutral-point voltage(NPV)fluctuations,which can lead to electromagnetic interference and degrade transient performance.To address these challenges,an optimized virtual space vector pulse width modulation(OVSVPWM)strategy is proposed,aiming to suppress CMV and NPV simultaneously through coordinated multi-objective control.Specifically,a dynamic feedback mechanism is introduced to adjust the balancing factor of basic vectors in the synthesized virtual small vector in real-time,achieving autonomous balancing of the NPV.To address the excessive switching actions introduced by the OVSVPWM strategy,a phase duty ratio-based sequence reconstruction method is adopted,which reduces the total number of switching actions to half of the original.A zero-level buffering scheme is employed to reconstruct the single-phase voltage-level output sequence,achieving peak CMV suppression down to udc/6.Simulation results demonstrate that the proposed strategy significantly improves electromagnetic compatibility and operational stability while maintaining high power quality.
基金supported in part by the National Natural Science Foundation of China under Grant 51907116in part sponsored by Natural Science Foundation of Shanghai 22ZR1425400sponsored by Shanghai Rising-Star Program 23QA1404000。
文摘Insulation failure significantly contributes to the unpredictable shutdown of power equipment.Compared to the partial discharge and high-frequency(HF)injection methods,the HF common-mode(CM)leakage current method offers a non-intrusive and highly sensitive alternative.However,the detection of HF CM currents is susceptible to interference from differential-mode(DM)currents,which exhibit high-amplitude and multifrequency components during normal operation.To address this challenge,this paper proposes a double-ring current sensor based on the principle of magnetic shielding for inverter-fed machine winding insulation monitoring.The inner ring harnesses the magnetic aggregation effect to isolate the DM current magnetic field,whereas the outer ring serves as the magnetic core of the Rogowski current sensor,enabling HF CM current monitoring.First,the magnetic field distributions of the CM and DM currents were analyzed.Then,a correlation between the sensor parameters and signal-to-noise ratio of the target HF CM current was established.Finally,an experimental study was conducted on a 3-kW PMSM for verification.The results indicate that the proposed double-ring HF CM sensor can effectively mitigate DM current interference.Compared to a single-ring sensor,a reduction of approximately 40%in the DM component was achieved,which significantly enhanced the precision of online insulation monitoring.
文摘Rectifiers with high efficiency and high power density are crucial to the stable and efficient power supply of 5G communication base stations,which deserves in-depth investigation.In general,there are two key problems to be addressed:supporting both alternating current(AC)and direct current(DC)input,and minimizing the common-mode voltage as well as leakage current for safety reasons.In this paper,a hybrid five-level single-phase rectifier is proposed.A five-level topology is adopted in the upper arm,and a half-bridge diode topology is adopted in the lower arm.A dual closed-loop control strategy and a flying capacitor voltage regulation method are designed accordingly so that the compatibility of both AC and DC input is realized with low common voltage and small passive devices.Simulation and experimental results demonstrate the effectiveness and performance of the proposed rectifier.
文摘The balanced operational amplifier including its merits and designing methods is discussed by comparing its performance to a conventional differential output amplifier when used in a single balanced stage. A balanced OTA circuit design is also presented.
文摘Carrier-based pulse width modulation (CBPWM) and virtual space vector pulse width modulation (VSVPWM) are briefly reviewed for neutral-point-clamped three-level inverters (NPC TLI). A new modulation strategy referred to as N3S_CBPWM is then proposed to simultaneously consider multiple goals, such as the-neutral-point voltage (NPV) balance, switching loss, and common-mode voltage (CMV) reduction. For N3S_CBPWM in each switching cycle, the three-phase switching actions are zero, one, and two. In addition, the constraint conditions of the modulation waves are provided based on the reduction of the CMV. Subsequently, N3S_CBPWM, CBPWM, and VSVPWM are compared in terms of the NPV balance capability, switching loss, and CMV reduction. Finally, the feasibility and superiority of the proposed N3S_CBPWM are verified experimentally.
文摘A feedforward current-sense current-compensation(CSCC)active EMI filter(AEF)for the direct current-side common-mode(CM)electromagnetic interference(EMI)suppression of high-power electric vehicle traction inverters is analyzed and designed.A detailed design of the components with formulas is provided based on an analysis of the CSCC AEF,including the CSCC AEF topology and its implementation.The feedforward active filter stage was implemented using a simple current transformer and a small circuit board.Only a small passive filter with a high resonant frequency is required for high-frequency noise attenuation.The filter’s effectiveness was validated using the simulation results and experimental measurements.
基金Project supported by the National Natural Science Foundation of China(No.51577172)
文摘Induction motor drive systems fed by cables are widely used in industrial applications. However, high-frequency switching of power devices will cause common-mode（CM） voltages during operation, leading to serious CM currents in the motor drive systems. CM currents through the cables and motors in the drive systems can cause electromagnetic interference（EMI） with the surrounding electronic equipment and shorten the life of induction motors. Therefore, it is necessary to analyze the CM currents in motor drive systems. In this paper, high-frequency models of unshielded and shielded power cables are formulated. The frequency-dependent effects and mutual inductances of the cables are taken into account. The power cable parameters are extracted by the finite element method and validated by measurements. High-frequency models of induction motors and inverters are introduced from existing works. The CM currents at the motor and inverter terminals are obtained, and the influence of the cable length and cable type on the CM currents is analyzed. There is a good agreement between the experimental results and the CM currents predicted by the proposed models.
基金Supported in part by the Royal Academy of Engineering:Transforming Systems through Partnership(China)under Grant TSPC1017in part by the Excellent Youth Scholars of National Natural Science Foundation of China under Grant 51822701in part by the Key Project of National Natural Science Foundation of China and Smart Grid Joint Fund of State Grid Corporation of China under Grant U1866211.
文摘With the increase in the switching frequency and power density,DC-DC converters encounter more severe electromagnetic interference(EMI)problems.To suppress the common-mode EMI generated by converters,as well as maintain the high-power-density of converters,the active EMI filter(AEF)has attracted increasing interest owing to its small volume.The EMI suppression effect of the common single-stage single-sense single-injection AEF is confined because of the limited insertion loss,and the volume of the multi-stage AEF will be bulky.To solve this problem,this paper proposes a compact dual-current-injection current-sense current-compensation(DCJ-CSCC)AEF to increase the insertion loss in the entire conducted EMI frequency band,as well as considering the volume of the AEF.The structure and operating principle of the proposed AEF are introduced.Finally,taking a boost converter as an example,the effectiveness and advantages of the proposed DCJ-CSCC AEF were verified through a simulation and experiment,the results show that the proposed AEF has a better EMI suppression effect on the entire conducted EMI frequency band with a similar volume compared with existing single-injection feedforward current-sense current-compensation(FF-CSCC)and feedback current-sense current-compensation(FB-CSCC)AEFs.This paper provides a new selection for EMI suppression in DC-DC converters.
基金supported by the National Science and Technology Major Project (2012ZX03002-001-02)the Fundamental Research Funds for the Central Universities of China (JB151109)
文摘A compact common-mode filter is proposed to suppress common-mode noise for application of high-speed differential signal traces. The filter adopts one big C-shaped defected ground structure （DGS） cell in the left of ground plane and two small C-shaped DGS cells with opposite direction in the right of ground plane. Because these DGS cells have different dimensions, the filter has three adjacent equivalent resonant points, which can suppress wideband common-mode noise effectively. The left C-shaped DGS and its adjacent C-shaped DGS cell form an approximate closed structure, which can efficiently reduce the influence of the mutual capacitance. The filter provides a common-mode suppression from 3.6 GHz to 14.4 GHz over 15 dB while it has a small size of 10 minx 10 mm. The fractional bandwidth of the filter is 120%, and the differential signals still keep good signal integrity. The experimental results are in good agreement with the simulated results.
基金This work was supported by the National Natural Science Foundation of China under Grant 51577010the Fundamental Research Funds for the Central Universities under Grant 2017JBM054the Natural Science Foundation of Guangdong Province under Grant 1714060000016.
文摘The common-mode current is an important indicator with transformerless photovoltaic inverters.However,up to now,there is not an accurate method to predict common-mode current in the inverter design process,resulting from inappropriate device selection or exceeded the expected common-mode current.In order to solve this problem,this paper proposes an accurate common-mode current prediction method based on graph theory for transformerless photovoltaic inverters.In this paper,the mathematic model of the common-mode current is derived using graph theory analysis method in the full-bridge topology,and it is used to predict common-mode current.The validity and correctness of the proposed prediction method are validated by simulation and experiment.The oscillation frequency and amplitude can be predicted by the proposed common-mode prediction method,whereas the traditional common-mode analysis method cannot.This paper provides a novel way to predict and analyze common-mode current in the transformerless photovoltaic inverters.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(2012ZX03001018-001)the Fundamental Research Funds for the Central Universities of China(K5051125007)
文摘An effective method to broaden the rejection bandwidth of dump-shaped defected ground structure(DGS) filter design is proposed in the paper. One traditional dumbbell-shaped DGS is split by using one split ring, and reconstructed into two different compact DGSs. The distance between both of the DGSs is so close that there exists mutual inductance, which can be utilized to broaden the rejection bandwidth effectively. The effect of different parameters of the split ring on the rejection bandwidth and depth of the filter is analyzed. Simulated results demonstrate that, with the same area of 5.5mm by 10 mm, rejection bandwidth of the proposed filter is from 4.4 GHz to 10.5 GHz for the common-mode noise(CM) while that of the traditional dumbbell-shaped DGS is from 5.3 GHz to 7.3 GHz. Compared to other schematics adopting multiple DGS to broaden bandwidth, it can broaden the bandwidth by dividing the existed DGS into multiple parts and reconstructing a new filter. The experimental results show good agreement with simulated results.
文摘Solid-state transformers(SSTs)have been widely used in many areas owing to their advantages of high-frequency isolation and high power density.However,high-frequency switching causes severe electromagnetic interference(EMI)problems.Particularly,the common-mode(CM)EMI caused by the switching of the dual active bridge(DAB)converter is conducted through the parasitic capacitances in the high-frequency transformer and impacts the system reliability.With the understanding of the CM EMI model in SSTs,CM EMI mitigation methods have been studied.For passive mitigation,the coupled inductor can be integrated with the phase-shift inductor function to reduce CM EMI.For active mitigation,variations in the DAB switching frequency can help reduce the CM EMI peak.An active EMI filter can also be designed to sample and compensate for CM EMI.Using these methods,CM EMI can be reduced in SSTs.
文摘Machine stator winding insulation degradation is one of the main results of machine aging.It is non-negligible once this degradation process becomes asymmetric between phases.The traditional way to determine the insulation state of health is a partial discharge test.However,this method requires the system offline,which causes production loss and extra administrative burden.This paper presents an idea for better characterizing the insulation machine’s state of health using common-mode(CM)behavior in the machine-drive system.With the help of circuit decomposition methods and modeling tools,the CM quantities due to asymmetric aging show a unique characteristic that distinguishes itself from other differential-mode(DM)quantities in the equivalent circuit.It is shown effective to represent the asymmetric aging effect from the detection of system leakage current.This paper provides an analytical method to quantify this characteristic from mathematical approaches,and a proper approximation has been made on the CM equivalent model(CEM)such that the CM behavior is accurately characterized.The proposed method will serve the purpose of predicting machine abnormal behavior using the simple RLC circuit.Researchers can adapt this method to quantify and characterize the machine insulation state of health(SOH).
文摘In this paper,the common-mode radiation characteristic of the connection between a cable and a conductor is analyzed by the electric field integral function(EFIF)and the method of moment(MoM).The RWG basis function is adopted as the conductor basis function,the pulse basis function as the wire basis function and the juncture employs Costa basis function.A scheme of singular region separation is proposed to overcome the integration singularity of juncture matrix elements.Some new conclusions of the common-mode radiation characteristics with the metal case are obtained by numeration.
