M-type barium hexaferrites with chemical composition Ba1-xDyxFe12-yCryO19(x = 0.0, 0.1, 0.2, and y =0.0, 0.4, 0.5) were synthesized via sol–gel auto-combustion method. The samples were pre-sintered at 400℃ for 3 h a...M-type barium hexaferrites with chemical composition Ba1-xDyxFe12-yCryO19(x = 0.0, 0.1, 0.2, and y =0.0, 0.4, 0.5) were synthesized via sol–gel auto-combustion method. The samples were pre-sintered at 400℃ for 3 h and sintered at 950℃ for 5 h. The changes in the structural, dielectric, and optical properties were studied after the substitution of Dy3+and Cr3+ions. X-ray diffraction(XRD) analysis confirms the formation of single phase hexaferrites with the absence of secondary phase. FTIR analysis gives an idea of the formation of hexaferrites with the appearance of two peaks at 438 cm-1and 589 cm-1. The field emission scanning electron micrographs(FESEM) show a combination of crystallites with large shapes close to hexagonal platelet-like shape and others with rice or rod-like shapes, whereas EDX and elemental analysis confirm the stoichiometry of prepared samples. The calculated band gap from UV-vis NIR spectroscopy spectra was found to decreases with increase in Dy3+–Cr3+substitution. The dielectric properties were explained on the basis of Maxwell–Wagner model. Enhancement of dielectric constant at higher frequencies was observed in all the samples. Low dielectric loss is also observed in all the samples and Cole–Cole plot shows that grain boundary resistance(Rgb) contribute most to the dielectric properties. The prepared samples exhibit properties that could be useful for optoelectronics and high frequency application.展开更多
The compatibility between direct coal liquefaction residue(DCLR) and five kinds of pure bitumen(Shell-90,SK-90, ZSY-70, DM-70 and KLMY-50) was evaluated in this study. The rheological characteristics, glass transition...The compatibility between direct coal liquefaction residue(DCLR) and five kinds of pure bitumen(Shell-90,SK-90, ZSY-70, DM-70 and KLMY-50) was evaluated in this study. The rheological characteristics, glass transition temperatures(T_g), solubility parameters(SP) and SARA(saturates, aromatics, resins, and asphaltenes) fractions of DCLR,five kinds of pure bitumen and their blends(named as DCLR modified bitumen) were measured using the dynamic shear rheometer(DSR), differential scanning calorimetry(DSC), viscosity, and SARA tests, respectively. And the compatibility between DCLR and pure bitumen was characterized with three approaches, viz. the Cole-Cole plot,T_g, and the solubility parameter difference(SPD) method. Since each method has its own working mechanism, the compatibility ranking for the DCLR and five kinds of pure bitumen is slightly different according to the three approaches. However, the difference is pretty close and sometimes can be ignored. The general compatibility ranking decreases in the following order: Shell-90≈SK-90>DM-70≈ZSY-70>KLMY-50, which is affected by the asphaltenes content and the colloid index(I_c) value in the pure bitumen. Pure bitumen with lower asphaltenes content and colloid index(I_c) value has better compatibility with DCLR.展开更多
文摘M-type barium hexaferrites with chemical composition Ba1-xDyxFe12-yCryO19(x = 0.0, 0.1, 0.2, and y =0.0, 0.4, 0.5) were synthesized via sol–gel auto-combustion method. The samples were pre-sintered at 400℃ for 3 h and sintered at 950℃ for 5 h. The changes in the structural, dielectric, and optical properties were studied after the substitution of Dy3+and Cr3+ions. X-ray diffraction(XRD) analysis confirms the formation of single phase hexaferrites with the absence of secondary phase. FTIR analysis gives an idea of the formation of hexaferrites with the appearance of two peaks at 438 cm-1and 589 cm-1. The field emission scanning electron micrographs(FESEM) show a combination of crystallites with large shapes close to hexagonal platelet-like shape and others with rice or rod-like shapes, whereas EDX and elemental analysis confirm the stoichiometry of prepared samples. The calculated band gap from UV-vis NIR spectroscopy spectra was found to decreases with increase in Dy3+–Cr3+substitution. The dielectric properties were explained on the basis of Maxwell–Wagner model. Enhancement of dielectric constant at higher frequencies was observed in all the samples. Low dielectric loss is also observed in all the samples and Cole–Cole plot shows that grain boundary resistance(Rgb) contribute most to the dielectric properties. The prepared samples exhibit properties that could be useful for optoelectronics and high frequency application.
基金sponsored by the National Natural Science Foundation of China (51478028 and 51778038)the Program for Changjiang Scholars and Innovative Research Team in Universities(IRT-17R06)
文摘The compatibility between direct coal liquefaction residue(DCLR) and five kinds of pure bitumen(Shell-90,SK-90, ZSY-70, DM-70 and KLMY-50) was evaluated in this study. The rheological characteristics, glass transition temperatures(T_g), solubility parameters(SP) and SARA(saturates, aromatics, resins, and asphaltenes) fractions of DCLR,five kinds of pure bitumen and their blends(named as DCLR modified bitumen) were measured using the dynamic shear rheometer(DSR), differential scanning calorimetry(DSC), viscosity, and SARA tests, respectively. And the compatibility between DCLR and pure bitumen was characterized with three approaches, viz. the Cole-Cole plot,T_g, and the solubility parameter difference(SPD) method. Since each method has its own working mechanism, the compatibility ranking for the DCLR and five kinds of pure bitumen is slightly different according to the three approaches. However, the difference is pretty close and sometimes can be ignored. The general compatibility ranking decreases in the following order: Shell-90≈SK-90>DM-70≈ZSY-70>KLMY-50, which is affected by the asphaltenes content and the colloid index(I_c) value in the pure bitumen. Pure bitumen with lower asphaltenes content and colloid index(I_c) value has better compatibility with DCLR.
