CoFe2O4-BaTiO3 particulate composites were prepared by wet ball milling method,their magnetoelectric（ME） effect was studied as a function of their constituents and modulation frequency.The results show that the ME c...CoFe2O4-BaTiO3 particulate composites were prepared by wet ball milling method,their magnetoelectric（ME） effect was studied as a function of their constituents and modulation frequency.The results show that the ME coefficient increases as a function of modulation frequency from 400 to 1000 Hz and the ME characteristics of ME curves are also modified because the electrical conductivity of the CoFe2O4 phase is sensitive to the increase in frequency between 400 and 1 000 Hz.The third phase Ba2Fe2O5 formed during the sintering tends to reduce the ME effect.展开更多
Ag3PO4 is widely used in the field of photocatalysis because of its unique activity. However, photocorrosion limits its practical application. Therefore, it is very urgent to find a solution to improve the light corro...Ag3PO4 is widely used in the field of photocatalysis because of its unique activity. However, photocorrosion limits its practical application. Therefore, it is very urgent to find a solution to improve the light corrosion resistance of Ag3PO4. Herein, the Z-scheme WO3(H2O)0.333/Ag3PO4 composites are successfully prepared through microwave hydrothermal and simple stirring. The WO3(H2O)0.333/Ag3PO4 composites are characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis spectroscopy. In the degradation of organic pollutants, WO3(H2O)0.333/Ag3PO4 composites exhibit excellent performance under visible light. This is mainly attributed to the synergy of WO3(H2O)0.333 and Ag3PO4. Especially, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is the highest, and the methylene blue can be completely degraded in 4 min. In addition, the stability of the composites is also greatly enhanced. After five cycles of testing, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is not obviously decreased. However, the degradation efficiency of Ag3PO4 was only 20.2%. This indicates that adding WO3(H2O)0.333 can significantly improve the photoetching resistance of Ag3PO4. Finally, Z-scheme photocatalytic mechanism is investigated.展开更多
Aluminum-matrix boron carbide (B4Cp/Al) is a kind of neutron absorbing material widely used in nuclear spent fuel storage. In order to improve the tensile property of B4Cp/Al composites, a new type of nano-Al2O3 parti...Aluminum-matrix boron carbide (B4Cp/Al) is a kind of neutron absorbing material widely used in nuclear spent fuel storage. In order to improve the tensile property of B4Cp/Al composites, a new type of nano-Al2O3 particle (Al2O3np) reinforced B4Cp/Al + Al2O3np composites were prepared by powder metallurgy method. The Monte Carlo particle transport program (MCNP) was used to determine the influence of Al2O3np on the thermal neutron absorptivity of composites. The universal material testing machine and scanning electron microscope (SEM) were used to study the mechanical properties, microstructure and fracture morphology of B4Cp/Al composites. The results indicated that the neutron absorption properties of B4Cp/Al composites were not affected by the addition of nano-Al2O3 particles in the range of 1 wt%-15 wt%. The addition of Al2O3np can obviously reduce the grain size of B4Cp/Al matrix metals thus improve the tensile strength of the composites. The addition threshold of Al2O3np is about 2.5 wt%. Both B4Cp and Al2O3np change the fracture characteristics of the composites from toughness to brittleness, and the latter is more important.展开更多
NiFe_(2)O_(4)/polypyrrole(NiFe_(2)O_(4)/PPy)nanocomposites are prepared by a simple surface-initiated polymerization method and demonstrate negative permittivity in the low frequency regions.These nanocomposites also ...NiFe_(2)O_(4)/polypyrrole(NiFe_(2)O_(4)/PPy)nanocomposites are prepared by a simple surface-initiated polymerization method and demonstrate negative permittivity in the low frequency regions.These nanocomposites also exhibit significantly enhanced electromagnetic wave(EMW)absorption property in the high frequency regions.Compared with pure PPy,the enhanced negative permittivity is observed in the NiFe_(2)O_(4)/PPy nanocomposites with a NiFe_(2)O_(4)loading of 5.0,10.0,20.0 and 40.0 wt%,indicating the formation of metal-like electrical conducting network in NiFe_(2)O_(4)/PPy nanocomposites.Moreover,the negative permittivity could be tuned by changing the NiFe_(2)O_(4)loading.The minimum reflection loss(RL)of-40.8 dB is observed in the 40.0 wt%NiFe_(2)O_(4)/PPy composites with a thickness of only 1.9 mm.The effective absorption bandwidth below-10.0 and-20.0 dB reaches 6.08 and 2.08 GHz,respectively.The enhanced EMW absorption performance benefits from the improved independence matching,EMW attenuation capacity,and synergistic effects of conduction loss,dielectric loss(interfacial and dipole polarizations)and magnetic loss(exchange and natural resonances).This research work provides a guidance for the fabrication of nanocomposites with an excellent EMW absorption.展开更多
Si3N4-Si2N2O composites were fabricated with amorphous nano-sized silicon nitride powders by the liquid phase sintering （ LPS ）. The Si2 N2O phase was generated by an in-situ reaction 2 Si3 N4 （ s ） ＋ 1.5 02 （ g...Si3N4-Si2N2O composites were fabricated with amorphous nano-sized silicon nitride powders by the liquid phase sintering （ LPS ）. The Si2 N2O phase was generated by an in-situ reaction 2 Si3 N4 （ s ） ＋ 1.5 02 （ g ） = 3 Si2 N2O （ s ） ＋ N2 （ g ） . The content of Si2 N2 O phase up to 60% in the volume was obtained at a sintering temperature of 1 650℃ and reduced when the sintering temperature increased or decreased, indicating the reaction is reversible. The mass loss, relative density and average grain size increased with increasing the sintering temperature. The average grain size was less than 500 nm when the sintering temperature was below 1 700 ℃. The sintering procedure contains a complex crystallization and a phase transition ： amorphous silicon nitride→equiaxial α- Si3 N4→ equiaxial β- Si3 N4→ rod- like Si2 N2O→ needle- like β- Si3N4 . Small round-shaped β→ Si3 N4 particles were entrapped in the Si2 N2O grains and a high density of staking faults was situated in the middle of Si2 N2O grains at a sintering temperature of 1 650 ℃. The toughness inereased from 3.5 MPa·m^1/2 at 1 600 ℃ to 7.2 MPa· m^1/2 at 1 800 ℃ . The hardness was as high as 21.5 GPa （Vickers） at 1 600 ℃ .展开更多
A magnetic CoFe2O4/Cd S nanocomposite was prepared via one-step hydrothermal decomposition of cadmium diethanoldithiocarbamate complex on the surface of CoFe2O4 nanoparticles at a low temperature of 200 ℃.The nanocom...A magnetic CoFe2O4/Cd S nanocomposite was prepared via one-step hydrothermal decomposition of cadmium diethanoldithiocarbamate complex on the surface of CoFe2O4 nanoparticles at a low temperature of 200 ℃.The nanocomposite was characterised by X-ray diffraction（XRD）,Fourier transform infrared spectroscopy（FT-IR）,scanning electron microscopy,energy-dispersive X-ray spectroscopy（EDX）,UV-visible spectroscopy,transmission electron microscopy（TEM）,N2 gas sorption analysis,X-ray photoelectron spectroscopy（XPS）,and vibrating sample magnetometry.The FT-IR,XRD,EDX and XPS results confirmed the formation of the CoFe2O4/Cd S nanocomposite.Based on the TEM analysis,the CoFe2O4/Cd S nanocomposite constituted nearly uniform,sphere-like nanoparticles of ～20 nm in size.The optical absorption spectrum of the CoFe2O4/Cd S nanocomposite displayed a band gap of 2.21 e V,which made it a suitable candidate for application in sono/photocatalytic degradation of organic pollutants.Accordingly,the sonocatalytic activity of the CoFe2O4/Cd S nanocomposite was evaluated towards the H2O2-assisted degradation of methylene blue,rhodamine B,and methyl orange under ultrasonic irradiation.The nanocomposite displayed excellent sonocatalytic activity towards the degradation of all dyes examined—the dyes were completely decomposed within 5–9 min.Furthermore,a comparison study revealed that the CoFe2O4/Cd S nanocomposite is a more efficient sonocatalyst than pure Cd S;thus,adopting the nanocomposite approach is an excellent means to improve the sonoactivity of Cd S.Moreover,the magnetic properties displayed by the CoFe2O4/Cd S nanocomposite allow easy retrieval of the catalyst from the reaction mixture for subsequent uses.展开更多
Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron...Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron microscopy（FE-SEM） and UV-vis diffuse reflectance spectroscopy（DRS）. When BN： BZN=0.1 mole ratio, the BN/BZN composite showed the best visible-light-driven photocatalytic performance, which decomposed nearly 100% of Rh B（10 ppm, p H=3-4） within 40 min. The results demonstrated that in-situ solid state synthesis of BN/BZN composites could be an efficient strategy to develop new photocatalyst for environmental remediation.展开更多
A Y2O3 particle enhanced Ni/TiC composite coating was fabricated in-situ on a TC4 Ti alloy by laser surface cladding.The phase component,microstructure,composition distribution and properties of the composite layer we...A Y2O3 particle enhanced Ni/TiC composite coating was fabricated in-situ on a TC4 Ti alloy by laser surface cladding.The phase component,microstructure,composition distribution and properties of the composite layer were investigated.The composite layer has graded microstructures and compositions,due to the fast melting followed by rapid solidification and cooling during laser cladding.The TiC powders are completely dissolved into the melted layer during melting and segregated as fine dendrites when solidified.The size of TiC dendrites decreases with increasing depth.Y2O3 fine particles distribute in the whole clad layer.The Y2O3 particle enhanced Ni/TiC composite layer has a quite uniform hardness along depth with a maximum value of HV1380,which is 4 times higher than the initial hardness.The wear resistance of the Ti alloy is significantly improved after laser cladding due to the high hardness of the composite coating.展开更多
基金The TGIST scholarship (TG-33-12-51-048D) is granted to the first author by the National Metal and Materials Technology Center (MTEC) of NSTDA
文摘CoFe2O4-BaTiO3 particulate composites were prepared by wet ball milling method,their magnetoelectric（ME） effect was studied as a function of their constituents and modulation frequency.The results show that the ME coefficient increases as a function of modulation frequency from 400 to 1000 Hz and the ME characteristics of ME curves are also modified because the electrical conductivity of the CoFe2O4 phase is sensitive to the increase in frequency between 400 and 1 000 Hz.The third phase Ba2Fe2O5 formed during the sintering tends to reduce the ME effect.
基金supported by the National Natural Science Foundation of China(51572103 and 51502106)the Distinguished Young Scholar of Anhui Province(1808085J14)+2 种基金the Foundation for Young Talents in College of Anhui Province(gxyqZD2017051)the Key Foundation of Educational Commission of Anhui Province(KJ2016SD53)the Innovation Team of Design and Application of Advanced Energetic Materials(KJ2015TD003)~~
文摘Ag3PO4 is widely used in the field of photocatalysis because of its unique activity. However, photocorrosion limits its practical application. Therefore, it is very urgent to find a solution to improve the light corrosion resistance of Ag3PO4. Herein, the Z-scheme WO3(H2O)0.333/Ag3PO4 composites are successfully prepared through microwave hydrothermal and simple stirring. The WO3(H2O)0.333/Ag3PO4 composites are characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis spectroscopy. In the degradation of organic pollutants, WO3(H2O)0.333/Ag3PO4 composites exhibit excellent performance under visible light. This is mainly attributed to the synergy of WO3(H2O)0.333 and Ag3PO4. Especially, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is the highest, and the methylene blue can be completely degraded in 4 min. In addition, the stability of the composites is also greatly enhanced. After five cycles of testing, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is not obviously decreased. However, the degradation efficiency of Ag3PO4 was only 20.2%. This indicates that adding WO3(H2O)0.333 can significantly improve the photoetching resistance of Ag3PO4. Finally, Z-scheme photocatalytic mechanism is investigated.
基金Funded by Natural National Science Foundation of China(NSFC)(No.11305149)National High-Tech R&D Program(863 Program)(No.2013AA030704)。
文摘Aluminum-matrix boron carbide (B4Cp/Al) is a kind of neutron absorbing material widely used in nuclear spent fuel storage. In order to improve the tensile property of B4Cp/Al composites, a new type of nano-Al2O3 particle (Al2O3np) reinforced B4Cp/Al + Al2O3np composites were prepared by powder metallurgy method. The Monte Carlo particle transport program (MCNP) was used to determine the influence of Al2O3np on the thermal neutron absorptivity of composites. The universal material testing machine and scanning electron microscope (SEM) were used to study the mechanical properties, microstructure and fracture morphology of B4Cp/Al composites. The results indicated that the neutron absorption properties of B4Cp/Al composites were not affected by the addition of nano-Al2O3 particles in the range of 1 wt%-15 wt%. The addition of Al2O3np can obviously reduce the grain size of B4Cp/Al matrix metals thus improve the tensile strength of the composites. The addition threshold of Al2O3np is about 2.5 wt%. Both B4Cp and Al2O3np change the fracture characteristics of the composites from toughness to brittleness, and the latter is more important.
基金supported by the Research Starting Foundation of Shaanxi University of Science and Technology(Program No.2019QNBJ-01)the Research Foundation for Thousand Young Talent Plan of Shaanxi province of China。
文摘NiFe_(2)O_(4)/polypyrrole(NiFe_(2)O_(4)/PPy)nanocomposites are prepared by a simple surface-initiated polymerization method and demonstrate negative permittivity in the low frequency regions.These nanocomposites also exhibit significantly enhanced electromagnetic wave(EMW)absorption property in the high frequency regions.Compared with pure PPy,the enhanced negative permittivity is observed in the NiFe_(2)O_(4)/PPy nanocomposites with a NiFe_(2)O_(4)loading of 5.0,10.0,20.0 and 40.0 wt%,indicating the formation of metal-like electrical conducting network in NiFe_(2)O_(4)/PPy nanocomposites.Moreover,the negative permittivity could be tuned by changing the NiFe_(2)O_(4)loading.The minimum reflection loss(RL)of-40.8 dB is observed in the 40.0 wt%NiFe_(2)O_(4)/PPy composites with a thickness of only 1.9 mm.The effective absorption bandwidth below-10.0 and-20.0 dB reaches 6.08 and 2.08 GHz,respectively.The enhanced EMW absorption performance benefits from the improved independence matching,EMW attenuation capacity,and synergistic effects of conduction loss,dielectric loss(interfacial and dipole polarizations)and magnetic loss(exchange and natural resonances).This research work provides a guidance for the fabrication of nanocomposites with an excellent EMW absorption.
基金Funded by the National Science Foundation of China ( No.50375037)
文摘Si3N4-Si2N2O composites were fabricated with amorphous nano-sized silicon nitride powders by the liquid phase sintering （ LPS ）. The Si2 N2O phase was generated by an in-situ reaction 2 Si3 N4 （ s ） ＋ 1.5 02 （ g ） = 3 Si2 N2O （ s ） ＋ N2 （ g ） . The content of Si2 N2 O phase up to 60% in the volume was obtained at a sintering temperature of 1 650℃ and reduced when the sintering temperature increased or decreased, indicating the reaction is reversible. The mass loss, relative density and average grain size increased with increasing the sintering temperature. The average grain size was less than 500 nm when the sintering temperature was below 1 700 ℃. The sintering procedure contains a complex crystallization and a phase transition ： amorphous silicon nitride→equiaxial α- Si3 N4→ equiaxial β- Si3 N4→ rod- like Si2 N2O→ needle- like β- Si3N4 . Small round-shaped β→ Si3 N4 particles were entrapped in the Si2 N2O grains and a high density of staking faults was situated in the middle of Si2 N2O grains at a sintering temperature of 1 650 ℃. The toughness inereased from 3.5 MPa·m^1/2 at 1 600 ℃ to 7.2 MPa· m^1/2 at 1 800 ℃ . The hardness was as high as 21.5 GPa （Vickers） at 1 600 ℃ .
基金the Lorestan University and Iran Nanotechnology Initiative Council (INIC) for their financial support
文摘A magnetic CoFe2O4/Cd S nanocomposite was prepared via one-step hydrothermal decomposition of cadmium diethanoldithiocarbamate complex on the surface of CoFe2O4 nanoparticles at a low temperature of 200 ℃.The nanocomposite was characterised by X-ray diffraction（XRD）,Fourier transform infrared spectroscopy（FT-IR）,scanning electron microscopy,energy-dispersive X-ray spectroscopy（EDX）,UV-visible spectroscopy,transmission electron microscopy（TEM）,N2 gas sorption analysis,X-ray photoelectron spectroscopy（XPS）,and vibrating sample magnetometry.The FT-IR,XRD,EDX and XPS results confirmed the formation of the CoFe2O4/Cd S nanocomposite.Based on the TEM analysis,the CoFe2O4/Cd S nanocomposite constituted nearly uniform,sphere-like nanoparticles of ～20 nm in size.The optical absorption spectrum of the CoFe2O4/Cd S nanocomposite displayed a band gap of 2.21 e V,which made it a suitable candidate for application in sono/photocatalytic degradation of organic pollutants.Accordingly,the sonocatalytic activity of the CoFe2O4/Cd S nanocomposite was evaluated towards the H2O2-assisted degradation of methylene blue,rhodamine B,and methyl orange under ultrasonic irradiation.The nanocomposite displayed excellent sonocatalytic activity towards the degradation of all dyes examined—the dyes were completely decomposed within 5–9 min.Furthermore,a comparison study revealed that the CoFe2O4/Cd S nanocomposite is a more efficient sonocatalyst than pure Cd S;thus,adopting the nanocomposite approach is an excellent means to improve the sonoactivity of Cd S.Moreover,the magnetic properties displayed by the CoFe2O4/Cd S nanocomposite allow easy retrieval of the catalyst from the reaction mixture for subsequent uses.
基金Funded by the National Natural Science Foundation of China(No.51662005)the Guangxi Natural Science Foundation(No.2014GXNSFFA118004)
文摘Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron microscopy（FE-SEM） and UV-vis diffuse reflectance spectroscopy（DRS）. When BN： BZN=0.1 mole ratio, the BN/BZN composite showed the best visible-light-driven photocatalytic performance, which decomposed nearly 100% of Rh B（10 ppm, p H=3-4） within 40 min. The results demonstrated that in-situ solid state synthesis of BN/BZN composites could be an efficient strategy to develop new photocatalyst for environmental remediation.
基金Projects(51101096,51002093)supported by the National Natural Science Foundation of ChinaProject(1052nm05000)supported by Special Foundation of the Shanghai Science and Technology Commission for Nano-Materials ResearchProject(J51042)supported by Leading Academic Discipline Project of the Shanghai Education Commission,China
文摘A Y2O3 particle enhanced Ni/TiC composite coating was fabricated in-situ on a TC4 Ti alloy by laser surface cladding.The phase component,microstructure,composition distribution and properties of the composite layer were investigated.The composite layer has graded microstructures and compositions,due to the fast melting followed by rapid solidification and cooling during laser cladding.The TiC powders are completely dissolved into the melted layer during melting and segregated as fine dendrites when solidified.The size of TiC dendrites decreases with increasing depth.Y2O3 fine particles distribute in the whole clad layer.The Y2O3 particle enhanced Ni/TiC composite layer has a quite uniform hardness along depth with a maximum value of HV1380,which is 4 times higher than the initial hardness.The wear resistance of the Ti alloy is significantly improved after laser cladding due to the high hardness of the composite coating.
