The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsor...The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsorption and biological degradation,are often hampered by low efficiency and the risk of secondary pollution.Photocatalysis emerges as a promising sustainable alternative;however,the benchmark material titanium dioxide(TiO_(2))suffers from its intrinsic limitations,notably its wide bandgap energy(≥3.4 eV)restricting its activity to the region of the ultraviolet light and its rapid recombination of photogenerated charge carriers.To overcome these constraints,this research focused on synthesizing novel TiO_(2)/Sn_(3)O_(4) heterojunction composite photocatalysts via a solvothermal approach.Comprehensive characterization techniques confirmed the successful formation of the composite,which revealed that ultrathin Sn3O4 nanosheets uniformly coated TiO_(2) nanospheres.This unique architecture effectively reduced the overall crystallinity and introduced the beneficial oxygen vacancies.Under visible-light irradiation(λ≥420 nm),the optimized TiO_(2)/Sn3O4 composite exhibited the exceptional photocatalytic performance,which achieved 96%degradation of MO within just 60 minutes.The calculated apparent kinetic rate constant(0.103 min^(-1))was remarkably(5.15 times)higher than that of pristine TiO_(2).ESR experiments identified that hydroxyl radicals(·OH)was the predominant active species driving the degradation.Furthermore,cyclic degradation tests demonstrated its excellent material stability,with the composite retaining 85%of its initial efficiency after four consecutive reuse cycles.This work underscored the synergistic effects within the TiO_(2)/Sn_(3)O_(4) heterojunction,which significantly enhanced the visible-light absorption,charge separation,and photocatalytic activity,which provided the valuable insights for designing efficient,stable catalysts for the advanced environmental remediation applications.展开更多
Aluminium matrix composite reinforced by Al2O3 particles was produced by adding NH4AlO（OH）HCO3 into molten aluminum.The mechanical properties and wear behavior of the as-fabricated composites were studied.The result...Aluminium matrix composite reinforced by Al2O3 particles was produced by adding NH4AlO（OH）HCO3 into molten aluminum.The mechanical properties and wear behavior of the as-fabricated composites were studied.The results show that during stirring γ-Al2O3 particles were formed via decomposition reaction of NH4AlO（OH）HCO3,and the distribution of Al2O3 particles is more uniform in the matrix aluminum than directly added Al2O3 into molten aluminum.The density and the hardness values of the as-fabricated composites increase with increasing the particle volume fraction,while the tensile strength of the composites decreases with increasing the volume fraction of the Al2O3 particles.The wear rate of the composites decreases with increasing the volume fraction of the particle and loading.The in situ formed Al2O3/Al composite by adding NH4AlO（OH）HCO3 shows more superior mechanical and wear behaviors than that prepared by directly adding Al2O3 particles.展开更多
Mesostructured Co3O4-CeO2 composite was found to be an effective catalytic material for the complete oxidation of benzene. The Co3O4-CeO2 catalysts with different Co/Ce ratios （mol/mol） were prepared via the nanocas...Mesostructured Co3O4-CeO2 composite was found to be an effective catalytic material for the complete oxidation of benzene. The Co3O4-CeO2 catalysts with different Co/Ce ratios （mol/mol） were prepared via the nanocasting method and the mesostructure was replicated from two-dimensional （2D） hexagonal SBA-15 and three-dimensional （3D） cubic KIT-6 silicas, respectively. All the obtained Co3O4-CeO2 catalysts exhibited the similar symmetry with the parent silicas and well ordered mesostructures. The Co3O4- CeO2 catalysts with 2D mesostructure showed lower catalytic activities than the corresponding 3D materials. The Co3O4-CeO2 catalyst nanocasted from KIT-6 and with the Co/Ce ratio of 16/1 possessed the best catalytic benzene oxidation activity due to larger quantities of surface hydroxyl groups and surface oxygenated species. The mesostructured Co3O4-CeO2 material thus shows great potential as a promising eco-environmental catalyst for benzene effective elimination.展开更多
Ag3PO4 is widely used in the field of photocatalysis because of its unique activity. However, photocorrosion limits its practical application. Therefore, it is very urgent to find a solution to improve the light corro...Ag3PO4 is widely used in the field of photocatalysis because of its unique activity. However, photocorrosion limits its practical application. Therefore, it is very urgent to find a solution to improve the light corrosion resistance of Ag3PO4. Herein, the Z-scheme WO3(H2O)0.333/Ag3PO4 composites are successfully prepared through microwave hydrothermal and simple stirring. The WO3(H2O)0.333/Ag3PO4 composites are characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis spectroscopy. In the degradation of organic pollutants, WO3(H2O)0.333/Ag3PO4 composites exhibit excellent performance under visible light. This is mainly attributed to the synergy of WO3(H2O)0.333 and Ag3PO4. Especially, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is the highest, and the methylene blue can be completely degraded in 4 min. In addition, the stability of the composites is also greatly enhanced. After five cycles of testing, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is not obviously decreased. However, the degradation efficiency of Ag3PO4 was only 20.2%. This indicates that adding WO3(H2O)0.333 can significantly improve the photoetching resistance of Ag3PO4. Finally, Z-scheme photocatalytic mechanism is investigated.展开更多
CeO2-Co3O4 catalysts for low-temperature CO oxidation were prepared by a co-precipitation method. In combination with the characterization methods of N2 adsorption/desorption, XRD, temperature-programmed reduction （...CeO2-Co3O4 catalysts for low-temperature CO oxidation were prepared by a co-precipitation method. In combination with the characterization methods of N2 adsorption/desorption, XRD, temperature-programmed reduction （TPR）, and FT-IR, the influence of the cerium content on the catalytic performance of CeO2-Co3O4 was investigated. The results indicate that the prepared CeO2-Co3O4 catalysts exhibit a better activity than that of pure CeO2 or pure Co3O4. The catalyst with the Ce/Co atomic ratio 1 ： 16 exhibits the best activity, which converts 77% of CO at room temperature and completely oxidizes CO at 45 ℃.展开更多
In this paper,magnetic composite Fe3 O4/CeO2（MC Fe/Ce） was synthesized via CeO2 covered onto the surface of Fe3O4 by sol-precipitation method.The as-synthesized samples were characterized by FE-SEM,XRD,SEM-EDS and F...In this paper,magnetic composite Fe3 O4/CeO2（MC Fe/Ce） was synthesized via CeO2 covered onto the surface of Fe3O4 by sol-precipitation method.The as-synthesized samples were characterized by FE-SEM,XRD,SEM-EDS and FT-IR spectrum.The pseudo-second-order（PSO） kinetic can describe well the adsorption of Acid black 210（AB210） onto the as-obtained MC Fe/Ce of which the adsorption isotherm fits the Langmuir adsorption model better than Freundlich adsorption model.Furthermore,the maximum monolayer adsorption capacity of MC Fe/Ce is about 93 mg/g,which is 6 times more than that of commercial CeO2 for AB210.Moreover,the removal rate of the adsorbates for AB210 is 82.3% after first adsorption and still about 70% the fourth forth adsorption experiments within 120 min,which demonstrates that the obtained MC Fe/Ce has outstanding adsorption capacity and good stability.Additionally,the composite can be easily separated from aqueous solution in a few seconds with an external magnetic field due to its magnetic property,which is vital and has potential for its practical applications.展开更多
文摘The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsorption and biological degradation,are often hampered by low efficiency and the risk of secondary pollution.Photocatalysis emerges as a promising sustainable alternative;however,the benchmark material titanium dioxide(TiO_(2))suffers from its intrinsic limitations,notably its wide bandgap energy(≥3.4 eV)restricting its activity to the region of the ultraviolet light and its rapid recombination of photogenerated charge carriers.To overcome these constraints,this research focused on synthesizing novel TiO_(2)/Sn_(3)O_(4) heterojunction composite photocatalysts via a solvothermal approach.Comprehensive characterization techniques confirmed the successful formation of the composite,which revealed that ultrathin Sn3O4 nanosheets uniformly coated TiO_(2) nanospheres.This unique architecture effectively reduced the overall crystallinity and introduced the beneficial oxygen vacancies.Under visible-light irradiation(λ≥420 nm),the optimized TiO_(2)/Sn3O4 composite exhibited the exceptional photocatalytic performance,which achieved 96%degradation of MO within just 60 minutes.The calculated apparent kinetic rate constant(0.103 min^(-1))was remarkably(5.15 times)higher than that of pristine TiO_(2).ESR experiments identified that hydroxyl radicals(·OH)was the predominant active species driving the degradation.Furthermore,cyclic degradation tests demonstrated its excellent material stability,with the composite retaining 85%of its initial efficiency after four consecutive reuse cycles.This work underscored the synergistic effects within the TiO_(2)/Sn_(3)O_(4) heterojunction,which significantly enhanced the visible-light absorption,charge separation,and photocatalytic activity,which provided the valuable insights for designing efficient,stable catalysts for the advanced environmental remediation applications.
基金Project(2009BAE80B01)supported by the Ministry of Science and Technology,China
文摘Aluminium matrix composite reinforced by Al2O3 particles was produced by adding NH4AlO（OH）HCO3 into molten aluminum.The mechanical properties and wear behavior of the as-fabricated composites were studied.The results show that during stirring γ-Al2O3 particles were formed via decomposition reaction of NH4AlO（OH）HCO3,and the distribution of Al2O3 particles is more uniform in the matrix aluminum than directly added Al2O3 into molten aluminum.The density and the hardness values of the as-fabricated composites increase with increasing the particle volume fraction,while the tensile strength of the composites decreases with increasing the volume fraction of the Al2O3 particles.The wear rate of the composites decreases with increasing the volume fraction of the particle and loading.The in situ formed Al2O3/Al composite by adding NH4AlO（OH）HCO3 shows more superior mechanical and wear behaviors than that prepared by directly adding Al2O3 particles.
基金supported by the National Natural Science Funds for Distinguished Young Scholar (No.20725723)the National Basic Research Program of China(No. 2010CB732300)the National High Technology Research and Development Program of China (No.2006AA06A310)
文摘Mesostructured Co3O4-CeO2 composite was found to be an effective catalytic material for the complete oxidation of benzene. The Co3O4-CeO2 catalysts with different Co/Ce ratios （mol/mol） were prepared via the nanocasting method and the mesostructure was replicated from two-dimensional （2D） hexagonal SBA-15 and three-dimensional （3D） cubic KIT-6 silicas, respectively. All the obtained Co3O4-CeO2 catalysts exhibited the similar symmetry with the parent silicas and well ordered mesostructures. The Co3O4- CeO2 catalysts with 2D mesostructure showed lower catalytic activities than the corresponding 3D materials. The Co3O4-CeO2 catalyst nanocasted from KIT-6 and with the Co/Ce ratio of 16/1 possessed the best catalytic benzene oxidation activity due to larger quantities of surface hydroxyl groups and surface oxygenated species. The mesostructured Co3O4-CeO2 material thus shows great potential as a promising eco-environmental catalyst for benzene effective elimination.
基金supported by the National Natural Science Foundation of China(51572103 and 51502106)the Distinguished Young Scholar of Anhui Province(1808085J14)+2 种基金the Foundation for Young Talents in College of Anhui Province(gxyqZD2017051)the Key Foundation of Educational Commission of Anhui Province(KJ2016SD53)the Innovation Team of Design and Application of Advanced Energetic Materials(KJ2015TD003)~~
文摘Ag3PO4 is widely used in the field of photocatalysis because of its unique activity. However, photocorrosion limits its practical application. Therefore, it is very urgent to find a solution to improve the light corrosion resistance of Ag3PO4. Herein, the Z-scheme WO3(H2O)0.333/Ag3PO4 composites are successfully prepared through microwave hydrothermal and simple stirring. The WO3(H2O)0.333/Ag3PO4 composites are characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis spectroscopy. In the degradation of organic pollutants, WO3(H2O)0.333/Ag3PO4 composites exhibit excellent performance under visible light. This is mainly attributed to the synergy of WO3(H2O)0.333 and Ag3PO4. Especially, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is the highest, and the methylene blue can be completely degraded in 4 min. In addition, the stability of the composites is also greatly enhanced. After five cycles of testing, the photocatalytic activity of 15%WO3(H2O)0.333/Ag3PO4 is not obviously decreased. However, the degradation efficiency of Ag3PO4 was only 20.2%. This indicates that adding WO3(H2O)0.333 can significantly improve the photoetching resistance of Ag3PO4. Finally, Z-scheme photocatalytic mechanism is investigated.
文摘CeO2-Co3O4 catalysts for low-temperature CO oxidation were prepared by a co-precipitation method. In combination with the characterization methods of N2 adsorption/desorption, XRD, temperature-programmed reduction （TPR）, and FT-IR, the influence of the cerium content on the catalytic performance of CeO2-Co3O4 was investigated. The results indicate that the prepared CeO2-Co3O4 catalysts exhibit a better activity than that of pure CeO2 or pure Co3O4. The catalyst with the Ce/Co atomic ratio 1 ： 16 exhibits the best activity, which converts 77% of CO at room temperature and completely oxidizes CO at 45 ℃.
基金Project supported by the Capacity Building Program of Shanghai Local Universities(12160503600)
文摘In this paper,magnetic composite Fe3 O4/CeO2（MC Fe/Ce） was synthesized via CeO2 covered onto the surface of Fe3O4 by sol-precipitation method.The as-synthesized samples were characterized by FE-SEM,XRD,SEM-EDS and FT-IR spectrum.The pseudo-second-order（PSO） kinetic can describe well the adsorption of Acid black 210（AB210） onto the as-obtained MC Fe/Ce of which the adsorption isotherm fits the Langmuir adsorption model better than Freundlich adsorption model.Furthermore,the maximum monolayer adsorption capacity of MC Fe/Ce is about 93 mg/g,which is 6 times more than that of commercial CeO2 for AB210.Moreover,the removal rate of the adsorbates for AB210 is 82.3% after first adsorption and still about 70% the fourth forth adsorption experiments within 120 min,which demonstrates that the obtained MC Fe/Ce has outstanding adsorption capacity and good stability.Additionally,the composite can be easily separated from aqueous solution in a few seconds with an external magnetic field due to its magnetic property,which is vital and has potential for its practical applications.
