Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolu...Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.展开更多
Pure TiO_(2)and copper-modified titania(Cu/TiO_(2))nanoparticles were synthesized through sol gel combined with the pyrolysis method for the removal of Congo red(CR)in wastewater treatment.Surface morphology and struc...Pure TiO_(2)and copper-modified titania(Cu/TiO_(2))nanoparticles were synthesized through sol gel combined with the pyrolysis method for the removal of Congo red(CR)in wastewater treatment.Surface morphology and structural evaluation utilized XRD,TEM,Raman,FTIR and BET techniques.Cu/TiO_(2)showed rich defects and a higher specific surface area than that of TiO_(2).The 1Cu/TiO_(2)(molar ratio Cu/TiO_(2)of 1/100)showed the best performance to adsorption of CR solution at different reaction conditions(contact duration,CR concentration,adsorbent dose,temperature,and initial pH).Adsorption kinetics and equilibrium isotherms were well-described with a pseudo-second-order kinetics and Freundlich model,respectively.The negative ΔG indicates stable adsorption of CR on the Cu/TiO_(2)surface.The adsorption efficiency only decreases by 6%after 5 cycles of adsorption regeneration.The successful synthesis of Cu/TiO_(2)offers a new possibility to address the problems related to CR dye from aqueous solutions.展开更多
The p-block metal(In,Sn,Bi,etc.)-based electrocatalysts have exhibited excellent activity in the electrocatalytic CO_(2)reduction(ECR)to formate.However,the rapid decrease in catalytic activity caused by catalyst reco...The p-block metal(In,Sn,Bi,etc.)-based electrocatalysts have exhibited excellent activity in the electrocatalytic CO_(2)reduction(ECR)to formate.However,the rapid decrease in catalytic activity caused by catalyst reconstruction and agglomeration under ECR conditions significantly restricts their practical applications.Herein,we developed a sulfur anchoring strategy to stabilize the high-density sub-3 nm In_(2)S_(3)nanoparticles on sulfur-doped porous carbon substrates(i-In_(2)S_(3)/S-C)for formate production.Systematic characterizations evidenced that the as-prepared catalyst exhibited a strong metal sulfide-support interaction(MSSI),which effectively regulated the electronic states of In_(2)S_(3),achieving a high formate Faradaic efficiency of 91%at−0.95 V vs.RHE.More importantly,the sulfur anchoring effectively immobilized the sub-3 nm In_(2)S_(3)nanoparticles to prevent them from agglomeration.It enabled the catalysts to exhibit much higher durability than the In_(2)S_(3)samples without sulfur anchoring,demonstrating that the strong MSSI and fast charge transfer on the catalytic interface could significantly promote the structural stability of In_(2)S_(3)catalysts.These results provide a viable approach for developing efficient and stable electrocatalysts for CO_(2)reduction.展开更多
In this study,the corrosion resistance and the stability of passive films on the laser melting depositionprocessed 316L austenitic stainless steel with varying CeO_(2)contents in the environment of proton exchange mem...In this study,the corrosion resistance and the stability of passive films on the laser melting depositionprocessed 316L austenitic stainless steel with varying CeO_(2)contents in the environment of proton exchange membrane fuel cells were investigated using a combination of electrochemical and microstructural analyses.The findings reveal that 316L austenitic stainless steel with 0.20 wt%CeO_(2)exhibits a superior corrosion resistance,primarily due to grain refinement,a high proportion of low-angle grain boundaries and low∑coincidence site lattice grain boundaries,as well as increased dislocation density.The addition of CeO_(2)optimizes the type and size of inclusions and exerts a drag effect on grain boundaries,promoting the refinement of grains in the laser melting deposition-processed 316L auste nitic stainless steel.Moreover,the combined effect of these factors provides more active sites for the formation of a dense passive film with fewer point defects.展开更多
The insulating nature and dissolution of vanadium-based oxides in aqueous electrolytes result in low capacity and lifespan during charge/discharge process, which is unable to meet the demands for the development and a...The insulating nature and dissolution of vanadium-based oxides in aqueous electrolytes result in low capacity and lifespan during charge/discharge process, which is unable to meet the demands for the development and application of high-energy-density aqueous zinc-ion batteries(AZIBs). Herein, a novel V_(2)O_(5-x)@C composite cathode consisting of conductive carbon coatings with abundant oxygen vacancies is specifically designed through plasma-enhanced chemical vapor deposition(PECVD) method. As expected,the ideal microstructure of V_(2)O_(5-x)@C cathode enables large specific surface areas, fast electron/ion diffusion kinetics, and superior interfacial stability, which can realize outstanding cycling stability and electrochemical performance. Consequently, the V_(2)O_(5-x)@C composite cathode delivers a high reversible rate capacity of 130.6 mAh/g at 10 A/g and remains 277.6 mAh/g when returned to 1 A/g. In addition, the Zn//V_(2)O_(5-x)@C full cell can stably cycle for 1000 cycles with a high initial specific capacity of 149.2 m Ah/g,possessing 83.8% capacity retention at 5 A/g. The process of constructing a conductive layer on the surface of cathode materials while increasing oxygen vacancies in the structure through PECVD provides new insight into the design of high-performance cathode materials for AZIBs.展开更多
A new combination method consisting of ball milling, carbothermic reduction and hydrochloric acid leaching was proposed for the preparation of nanosized synthetic rutile from natural ilmenite. The ball milling was emp...A new combination method consisting of ball milling, carbothermic reduction and hydrochloric acid leaching was proposed for the preparation of nanosized synthetic rutile from natural ilmenite. The ball milling was employed to grind ilmenite into small particles. The carbothermic reduction was carried out to yield a high titanium slag, which would be easily purified by subsequent leaching procedure. Factors affecting the hydrochloric acid process, namely the leaching time, temperature, and acid concentration, were studied. After leaching and calcining the milled and annealed mixture of FeTiO3/C under the optimal conditions, the TiO2 nanoparticles with size of 10-200 nm and purity〉98.0% were obtained.展开更多
Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive a...Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.展开更多
A novel titanium dioxide （TiO2） film comprising both nanotubes and nanopaticles was fabricated by an anodization process of the modified titanium. The local electric field at the anodized surface was simulated and i...A novel titanium dioxide （TiO2） film comprising both nanotubes and nanopaticles was fabricated by an anodization process of the modified titanium. The local electric field at the anodized surface was simulated and its influence on the morphology of the TiO2 film was discussed. The results show that the electric field strength is enhanced by the covering. The growth rate of TiO2 increases with the assist of the local electric field. However, TiO2 dissolution is hindered since the local electric field prevents [TiF6]6- from diffusing. It means that the balance condition for the formation of nanotubes is broken, and TiO2 nanoparticles are formed. Moreover, the crystal structure of the TiO2 film was confirmed using X-ray diffraction and Raman analysis. The anatase is a main phase for the proposed film.展开更多
Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emissi...Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the crystalline structure, chemical valence states and morphology of TiO2 nanoparticles. UV-Vis absorption spectrum was used to measure the optical absorption property of the samples. The photocatalytic performance of the samples was characterized by degrading 20 mg/L methyl orange under UV-Vis irradiation. The results show that the Cu-doped TiO2 nanoparticles exhibit a significant increase in photocatalytic performance over the pure TiO2 nanoparticles, and the TiO2 nanoparticles doped with 1.0% Cu show the best photocatalytic performance. The improvement in photocatalytic performance is attributed to the enhanced light adsorption in UV-Vis range and the decrease of the recombination rate of photoinduced electron-hole oair of the Cu-doped TiO2 nanoparticles.展开更多
Increasing application of nanotechnology highlights the need to clarify and understand nanotoxicity. Mammalian and in vitro studies have raised concerns about the toxicity of titanium dioxide nanoparticles （TiO2-NPs...Increasing application of nanotechnology highlights the need to clarify and understand nanotoxicity. Mammalian and in vitro studies have raised concerns about the toxicity of titanium dioxide nanoparticles （TiO2-NPs）, but there are limited data on ecotoxicity to aquatic organisms. In this work, the sub-acute toxicity of TiO2-NPs to carp （Cyprinus carpio） was assessed. Superoxide dismutase （SOD）, catalase （CAT） and peroxidase （POD） activities and lipid peroxidation （LPO） levels in liver, gill and brain tissues of carps varied with concentration of TiO2-NPs suspensions and exposure time （up to 8 d）. As a result, 100 and 200 mg/L TiO2-NPs caused statistically significant decrease in SOD, CAT and POD activities and significant increase in LPO levels in tissues （P 〈 0.05）, suggesting that the fish exposed to these two concentrations of TiO2-NPs suffered from the oxidative stress. The extent of depletion of antioxidant enzymes activities and the elevation of LPO in the liver was the greatest, indicating that the liver might be the most susceptible organ to TiO2-NPs exposure. In addition, carps had gill pathologies including edema and thickening of gill lamellae as well as gill filaments, and liver pathologies including necrotic and apoptosis hepatocytes after exposed to 100 and 200 mg/L TiO2-NPs for 20 d. These results indicated a potential risk from TiO2-NPs released into the aqueous environment.展开更多
There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study,...There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study, the thermal conductivity values of heat transfer oil and TiO2 nano-oil in the above high temperature range were measured by a newly developed high-temperature thermal conductivity meter. Based on the principle of least square method, the thermal conductivity values obtained from experiments were fitted separately, and the correlation between thermal conductivity and temperature of heat transfer oil and TiO2 nano-oil was obtained. The results show that the thermal conductivity and the increased percentage of thermal conductivity of TiO2 nano-oil are proportional to the increase of particle size and mass fraction of nanoparticles, but thermal conductivity is in reverse proportion to the increase of temperature and the increased percentage of thermal conductivity is less affected by temperature.展开更多
Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxid...Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxide nanoparticles（TiO2-NPs） are produced worldwide in large quantities for a wide range of purposes. In the present study, the uptake of TiO2-NPs by the aquatic plant Spirodela polyrrhiza and the consequent effects on the plant were evaluated.Initially, structural and morphological characteristics of the used TiO2-NPs were determined using XRD, SEM, TEM and BET techniques. As a result, an anatase structure with the average crystalline size of 8 nm was confirmed for the synthesized TiO2-NPs. Subsequently, entrance of TiO2-NPSto plant roots was verified by fluorescence microscopic images. Activity of a number of antioxidant enzymes, as well as, changes in growth parameters and photosynthetic pigment contents as physiological indices were assessed to investigate the effects of TiO2-NPs on S. polyrrhiza. The increasing concentration of TiO2-NPs led to the significant decrease in all of the growth parameters and changes in antioxidant enzyme activities. The activity of superoxide dismutase enhanced significantly by the increasing concentration of TiO2-NPs. Enhancement of superoxide dismutase activity could be explained as promoting antioxidant system to scavenging the reactive oxygen species. In contrast, the activity of peroxidase was notably decreased in the treated plants. Reduced peroxidase activity could be attributed to either direct effect of these particles on the molecular structure of the enzyme or plant defense system damage due to reactive oxygen species.展开更多
Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results ...Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results of scanning tunneling spectroscopy （STS） show that the surface electronic structures of TiO2 nanoparticles are modified by introducing new electronic states in the surface band gap through cerium ion doping. The results are discussed in terms of the influence of doping concentration on the surface band gap of TiO2.展开更多
Wound healing remains a critical challenge in medical treatment,particularly for infected and complex wounds.This study introduces a novel spray able nanocomposite hydrogel dressing(SA/CaCl_(2)/CeO_(2),SCC)that demons...Wound healing remains a critical challenge in medical treatment,particularly for infected and complex wounds.This study introduces a novel spray able nanocomposite hydrogel dressing(SA/CaCl_(2)/CeO_(2),SCC)that demonstrates exceptional potential for accelerated wound healing and bacterial infection control.By integrating cerium oxide nanoparticles(CeO_(2)NPs)with sodium alginate(SA)and calcium chloride(CaCl_(2)),we developed a versatile and portable wound healing solution that possesses the ability to scavenge reactive oxygen species(ROS),remarkable biocompatibility,antibacterial properties,and regenerative capabilities.The synthesized SCC hydrogel was comprehensively characterized through advanced microscopic and spectroscopic techniques,revealing a unique nanostructured composition with intrinsic redox capacity.In vitro assessments demonstrated excellent cytocompatibility,hemocompatibility,and potent antibacterial activity against both gram-positive and gramnegative bacteria.In vivo rat wound model experiments further validated the hydrogel's therapeutic efficacy,showing significantly accelerated wound closure,reduced inflammatory responses,and enhanced tissue regeneration.Key innovations include the hydrothermal synthesis of CeO_(2)nanoparticles,a simple spray-induced crosslinking process,and the strategic incorporation of nanoparticles to modulate wound healing mechanisms.The SCC hydrogel exhibited superior performance in promoting granulation tissue formation,collagen deposition,and bacterial elimination,positioning it as a promising candidate for advanced wound management strategies.展开更多
Nanocatalysts consisting of three‐dimensionally ordered macroporous(3DOM)TiO2‐supported ultrafine Pd nanoparticles(Pd/3DOM‐TiO2‐GBMR)were readily fabricated by gas bubbling‐assisted membrane reduction(GBMR)method...Nanocatalysts consisting of three‐dimensionally ordered macroporous(3DOM)TiO2‐supported ultrafine Pd nanoparticles(Pd/3DOM‐TiO2‐GBMR)were readily fabricated by gas bubbling‐assisted membrane reduction(GBMR)method.These catalysts had a well‐defined and highly ordered macroporous nanostructure with an average pore size of 280 nm.In addition,ultrafine hemispherical Pd nanoparticles(NPs)with a mean particle size of 1.1 nm were found to be well dispersed over the surface of the 3DOM‐TiO2 support and deposited on the inner walls of the material.The nanostructure of the 3DOM‐TiO2 support ensured efficient contact between soot particles and the catalyst.The large interface area between the ultrafine Pd NPs and the TiO2 also increased the density of sites for O2 activation as a result of the strong metal(Pd)‐support(TiO2)interaction(SMSI).A Pd/3DOM‐TiO2‐GBMR catalyst with ultrafine Pd NPs(1.1 nm)exhibited higher catalytic activity during diesel soot combustion compared with that obtained from a specimen having relatively large Pd NPs(5.0 nm).The T10,T50 and T90 values obtained from the former were 295,370 and 415°C.Both the activity and nanostructure of the Pd/3DOM‐TiO2‐GBMR catalyst were stable over five replicate soot oxidation trials.These results suggest that nanocatalysts having a 3DOM structure together with ultrafine Pd NPs can decrease the amount of Pd required,and that this approach has potential practical applications in the catalytic combustion of diesel soot particles.展开更多
Ag-TiO2/ITO film electrode was used as photoanode to investigate the feasibility of a hybrid technology of Ag nanoparticles combined with the application of anodic bias. The results showed that the deposited Ag and a...Ag-TiO2/ITO film electrode was used as photoanode to investigate the feasibility of a hybrid technology of Ag nanoparticles combined with the application of anodic bias. The results showed that the deposited Ag and applied anodic bias have an apparent additive effect.展开更多
The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hyd...The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.展开更多
We report a colloidal process to coat a layer of TiO2onto SiO2composite nanofibers containing embedded CdS and upconversion nanoparticles(UCNPs).The SiO2composite nanofibers were fabricated by electrospinning.To impro...We report a colloidal process to coat a layer of TiO2onto SiO2composite nanofibers containing embedded CdS and upconversion nanoparticles(UCNPs).The SiO2composite nanofibers were fabricated by electrospinning.To improve the energy transfer efficiency,UCNPs and CdS nanoparticles were bound in close proximity to each other within the SiO2matrix.β‐NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)core–shell nanoparticles were used as nanotransducers for near infrared light.These nanoparticles exhibited enhanced upconversion fluorescence compared withβ‐NaYF4:Yb(30%),Tm(0.5%)orβ–NaYF4:Yb(30%),Tm(0.5%)@NaYF4nanoparticles.The morphologies,size and chemical compositions have been extensively investigated using field emission scanning electron microscopy(FESEM),transmission electron microscopy(TEM),X‐ray diffraction(XRD)and X‐ray photoelectron spectra(XPS),respectively.The TEM images showed that the TiO2composite nanotubes were embedded with a large amount of UCNPs and CdS nanoparticles.The composite TiO2nanotubes degraded more than90%of rhodamine B(RhB)dye during20min of irradiation by simulated solar light.In particular,more than50%of RhB was decomposed in70min,under irradiation of near infrared light(NIR).This high degradation was attributed to the full spectrum absorption of solar light,and the enhanced transfer efficiency for near infrared light.The as‐prepared nanostructures can harness solar energy,and provide an alternative to overcome energy shortages and environmental protection.展开更多
The efficient production of acetate through electrochemical CO_(2)reduction reaction(eCO_(2)RR)with low energy consumption has consistently been a challenging yet extremely significant task.Current catalysts suffered ...The efficient production of acetate through electrochemical CO_(2)reduction reaction(eCO_(2)RR)with low energy consumption has consistently been a challenging yet extremely significant task.Current catalysts suffered from high energy consumption and low relative purity of acetate product.Herein,we report ultrasmall Cu_(2)O nanoparticles with an average size of 2.5±0.09 nm immobilized on a conductive copper-based metal-organic framework(Cu-THQ)(denoted as Cu_(2)O@Cu-THQ),which attained a Faradaic efficiency of 65(3)%for acetate at a very low potential of-0.3 V vs.RHE with a current density of 10.5 m A/cm^(2).Importantly,as there are no other liquid phase products such as formate,methanol or ethanol,the relative purity of the obtained acetate product was as high as 100%.Taking into account the relative purity of the liquid product,current density,and energy consumption,the performance for electroreduction of CO_(2)to acetate of Cu_(2)O@Cu-THQ is not only much higher than that of the commercial Cu_(2)O nanoparticles,but also higher than those of all reported catalysts.Operando infrared spectroscopy and theoretical calculations indicated that the synergy effect between Cu-THQ and Cu_(2)O promoted the e CO_(2)RR to yield acetate.Specifically,the hydroxyl group on the organic ligand THQ in the Cu-THQ formed hydrogen bond interactions with the key C_(2)intermediates(*CH_(2)COOH and*HOCCOH)adsorbed on Cu_(2)O,which played a crucial role in stabilizing the key C_(2)intermediates and thus reduced the formation energy of the key C_(2) intermediates.展开更多
基金support from the European Union Horizon 2020 program(project HERMES,nr.952184)the Ministry of Education,Youth and Sports of the Czech Republic for supporting CEMNAT(LM2023037)+1 种基金Czech-NanoLab(LM2023051)infrastructures for providing ALD,SEM,EDX,XPS,TEM,and XRDCzech Science Foundation(project 23-08019X,EXPRO).
文摘Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.
基金supported by the Inner Mongolia Natural Science Foundation(2024QN02011)basic scientific research business expense project of colleges and universities directly under Inner Mongolia(2023QNJS131 and 2024QNJS127)Science and Technology Plan Program of Inner Mongolia Autonomous Region(2023YFDZ0031).
文摘Pure TiO_(2)and copper-modified titania(Cu/TiO_(2))nanoparticles were synthesized through sol gel combined with the pyrolysis method for the removal of Congo red(CR)in wastewater treatment.Surface morphology and structural evaluation utilized XRD,TEM,Raman,FTIR and BET techniques.Cu/TiO_(2)showed rich defects and a higher specific surface area than that of TiO_(2).The 1Cu/TiO_(2)(molar ratio Cu/TiO_(2)of 1/100)showed the best performance to adsorption of CR solution at different reaction conditions(contact duration,CR concentration,adsorbent dose,temperature,and initial pH).Adsorption kinetics and equilibrium isotherms were well-described with a pseudo-second-order kinetics and Freundlich model,respectively.The negative ΔG indicates stable adsorption of CR on the Cu/TiO_(2)surface.The adsorption efficiency only decreases by 6%after 5 cycles of adsorption regeneration.The successful synthesis of Cu/TiO_(2)offers a new possibility to address the problems related to CR dye from aqueous solutions.
文摘The p-block metal(In,Sn,Bi,etc.)-based electrocatalysts have exhibited excellent activity in the electrocatalytic CO_(2)reduction(ECR)to formate.However,the rapid decrease in catalytic activity caused by catalyst reconstruction and agglomeration under ECR conditions significantly restricts their practical applications.Herein,we developed a sulfur anchoring strategy to stabilize the high-density sub-3 nm In_(2)S_(3)nanoparticles on sulfur-doped porous carbon substrates(i-In_(2)S_(3)/S-C)for formate production.Systematic characterizations evidenced that the as-prepared catalyst exhibited a strong metal sulfide-support interaction(MSSI),which effectively regulated the electronic states of In_(2)S_(3),achieving a high formate Faradaic efficiency of 91%at−0.95 V vs.RHE.More importantly,the sulfur anchoring effectively immobilized the sub-3 nm In_(2)S_(3)nanoparticles to prevent them from agglomeration.It enabled the catalysts to exhibit much higher durability than the In_(2)S_(3)samples without sulfur anchoring,demonstrating that the strong MSSI and fast charge transfer on the catalytic interface could significantly promote the structural stability of In_(2)S_(3)catalysts.These results provide a viable approach for developing efficient and stable electrocatalysts for CO_(2)reduction.
基金Project supported by National Natural Science Foundation of China(52071227)Central Government Guidance to Local Science and Technology Development(YDZJSK20231A046)Key Scientific Research Project in Shanxi Province(202102050201003,202102050201010)。
文摘In this study,the corrosion resistance and the stability of passive films on the laser melting depositionprocessed 316L austenitic stainless steel with varying CeO_(2)contents in the environment of proton exchange membrane fuel cells were investigated using a combination of electrochemical and microstructural analyses.The findings reveal that 316L austenitic stainless steel with 0.20 wt%CeO_(2)exhibits a superior corrosion resistance,primarily due to grain refinement,a high proportion of low-angle grain boundaries and low∑coincidence site lattice grain boundaries,as well as increased dislocation density.The addition of CeO_(2)optimizes the type and size of inclusions and exerts a drag effect on grain boundaries,promoting the refinement of grains in the laser melting deposition-processed 316L auste nitic stainless steel.Moreover,the combined effect of these factors provides more active sites for the formation of a dense passive film with fewer point defects.
基金financially supported by the National Natural Science Foundation of China (No. 52377222)Natural Science Foundation of Hunan Province (No. 2023JJ20064)。
文摘The insulating nature and dissolution of vanadium-based oxides in aqueous electrolytes result in low capacity and lifespan during charge/discharge process, which is unable to meet the demands for the development and application of high-energy-density aqueous zinc-ion batteries(AZIBs). Herein, a novel V_(2)O_(5-x)@C composite cathode consisting of conductive carbon coatings with abundant oxygen vacancies is specifically designed through plasma-enhanced chemical vapor deposition(PECVD) method. As expected,the ideal microstructure of V_(2)O_(5-x)@C cathode enables large specific surface areas, fast electron/ion diffusion kinetics, and superior interfacial stability, which can realize outstanding cycling stability and electrochemical performance. Consequently, the V_(2)O_(5-x)@C composite cathode delivers a high reversible rate capacity of 130.6 mAh/g at 10 A/g and remains 277.6 mAh/g when returned to 1 A/g. In addition, the Zn//V_(2)O_(5-x)@C full cell can stably cycle for 1000 cycles with a high initial specific capacity of 149.2 m Ah/g,possessing 83.8% capacity retention at 5 A/g. The process of constructing a conductive layer on the surface of cathode materials while increasing oxygen vacancies in the structure through PECVD provides new insight into the design of high-performance cathode materials for AZIBs.
基金Project (2007CB613601) supported by the National Basic Research Program of ChinaProject supported by the Postdoctoral Science Foundation of Central South University, China
文摘A new combination method consisting of ball milling, carbothermic reduction and hydrochloric acid leaching was proposed for the preparation of nanosized synthetic rutile from natural ilmenite. The ball milling was employed to grind ilmenite into small particles. The carbothermic reduction was carried out to yield a high titanium slag, which would be easily purified by subsequent leaching procedure. Factors affecting the hydrochloric acid process, namely the leaching time, temperature, and acid concentration, were studied. After leaching and calcining the milled and annealed mixture of FeTiO3/C under the optimal conditions, the TiO2 nanoparticles with size of 10-200 nm and purity〉98.0% were obtained.
基金Projects(41172110,61107090)supported by the National Natural Science Foundation of China
文摘Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.
文摘A novel titanium dioxide （TiO2） film comprising both nanotubes and nanopaticles was fabricated by an anodization process of the modified titanium. The local electric field at the anodized surface was simulated and its influence on the morphology of the TiO2 film was discussed. The results show that the electric field strength is enhanced by the covering. The growth rate of TiO2 increases with the assist of the local electric field. However, TiO2 dissolution is hindered since the local electric field prevents [TiF6]6- from diffusing. It means that the balance condition for the formation of nanotubes is broken, and TiO2 nanoparticles are formed. Moreover, the crystal structure of the TiO2 film was confirmed using X-ray diffraction and Raman analysis. The anatase is a main phase for the proposed film.
基金Project(2010CB631001)supported by the National Basic Research Program of ChinaProject(50871046)supported by the National Natural Science Foundation of China
文摘Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the crystalline structure, chemical valence states and morphology of TiO2 nanoparticles. UV-Vis absorption spectrum was used to measure the optical absorption property of the samples. The photocatalytic performance of the samples was characterized by degrading 20 mg/L methyl orange under UV-Vis irradiation. The results show that the Cu-doped TiO2 nanoparticles exhibit a significant increase in photocatalytic performance over the pure TiO2 nanoparticles, and the TiO2 nanoparticles doped with 1.0% Cu show the best photocatalytic performance. The improvement in photocatalytic performance is attributed to the enhanced light adsorption in UV-Vis range and the decrease of the recombination rate of photoinduced electron-hole oair of the Cu-doped TiO2 nanoparticles.
基金supported by the China Postdoctoral Science Foundation Funded Project (No 20080431217)the Cheung Kong Scholar Program of Education Ministry of China
文摘Increasing application of nanotechnology highlights the need to clarify and understand nanotoxicity. Mammalian and in vitro studies have raised concerns about the toxicity of titanium dioxide nanoparticles （TiO2-NPs）, but there are limited data on ecotoxicity to aquatic organisms. In this work, the sub-acute toxicity of TiO2-NPs to carp （Cyprinus carpio） was assessed. Superoxide dismutase （SOD）, catalase （CAT） and peroxidase （POD） activities and lipid peroxidation （LPO） levels in liver, gill and brain tissues of carps varied with concentration of TiO2-NPs suspensions and exposure time （up to 8 d）. As a result, 100 and 200 mg/L TiO2-NPs caused statistically significant decrease in SOD, CAT and POD activities and significant increase in LPO levels in tissues （P 〈 0.05）, suggesting that the fish exposed to these two concentrations of TiO2-NPs suffered from the oxidative stress. The extent of depletion of antioxidant enzymes activities and the elevation of LPO in the liver was the greatest, indicating that the liver might be the most susceptible organ to TiO2-NPs exposure. In addition, carps had gill pathologies including edema and thickening of gill lamellae as well as gill filaments, and liver pathologies including necrotic and apoptosis hepatocytes after exposed to 100 and 200 mg/L TiO2-NPs for 20 d. These results indicated a potential risk from TiO2-NPs released into the aqueous environment.
基金Project(51346007) supported by the National Natural Science Foundation of China
文摘There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study, the thermal conductivity values of heat transfer oil and TiO2 nano-oil in the above high temperature range were measured by a newly developed high-temperature thermal conductivity meter. Based on the principle of least square method, the thermal conductivity values obtained from experiments were fitted separately, and the correlation between thermal conductivity and temperature of heat transfer oil and TiO2 nano-oil was obtained. The results show that the thermal conductivity and the increased percentage of thermal conductivity of TiO2 nano-oil are proportional to the increase of particle size and mass fraction of nanoparticles, but thermal conductivity is in reverse proportion to the increase of temperature and the increased percentage of thermal conductivity is less affected by temperature.
文摘Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxide nanoparticles（TiO2-NPs） are produced worldwide in large quantities for a wide range of purposes. In the present study, the uptake of TiO2-NPs by the aquatic plant Spirodela polyrrhiza and the consequent effects on the plant were evaluated.Initially, structural and morphological characteristics of the used TiO2-NPs were determined using XRD, SEM, TEM and BET techniques. As a result, an anatase structure with the average crystalline size of 8 nm was confirmed for the synthesized TiO2-NPs. Subsequently, entrance of TiO2-NPSto plant roots was verified by fluorescence microscopic images. Activity of a number of antioxidant enzymes, as well as, changes in growth parameters and photosynthetic pigment contents as physiological indices were assessed to investigate the effects of TiO2-NPs on S. polyrrhiza. The increasing concentration of TiO2-NPs led to the significant decrease in all of the growth parameters and changes in antioxidant enzyme activities. The activity of superoxide dismutase enhanced significantly by the increasing concentration of TiO2-NPs. Enhancement of superoxide dismutase activity could be explained as promoting antioxidant system to scavenging the reactive oxygen species. In contrast, the activity of peroxidase was notably decreased in the treated plants. Reduced peroxidase activity could be attributed to either direct effect of these particles on the molecular structure of the enzyme or plant defense system damage due to reactive oxygen species.
文摘Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results of scanning tunneling spectroscopy （STS） show that the surface electronic structures of TiO2 nanoparticles are modified by introducing new electronic states in the surface band gap through cerium ion doping. The results are discussed in terms of the influence of doping concentration on the surface band gap of TiO2.
基金financially supported by the National Natural Science Foundation of China(No.81802690)the Natural Science Foundation of Shaanxi Province(No.S2024-JCYB-1354)
文摘Wound healing remains a critical challenge in medical treatment,particularly for infected and complex wounds.This study introduces a novel spray able nanocomposite hydrogel dressing(SA/CaCl_(2)/CeO_(2),SCC)that demonstrates exceptional potential for accelerated wound healing and bacterial infection control.By integrating cerium oxide nanoparticles(CeO_(2)NPs)with sodium alginate(SA)and calcium chloride(CaCl_(2)),we developed a versatile and portable wound healing solution that possesses the ability to scavenge reactive oxygen species(ROS),remarkable biocompatibility,antibacterial properties,and regenerative capabilities.The synthesized SCC hydrogel was comprehensively characterized through advanced microscopic and spectroscopic techniques,revealing a unique nanostructured composition with intrinsic redox capacity.In vitro assessments demonstrated excellent cytocompatibility,hemocompatibility,and potent antibacterial activity against both gram-positive and gramnegative bacteria.In vivo rat wound model experiments further validated the hydrogel's therapeutic efficacy,showing significantly accelerated wound closure,reduced inflammatory responses,and enhanced tissue regeneration.Key innovations include the hydrothermal synthesis of CeO_(2)nanoparticles,a simple spray-induced crosslinking process,and the strategic incorporation of nanoparticles to modulate wound healing mechanisms.The SCC hydrogel exhibited superior performance in promoting granulation tissue formation,collagen deposition,and bacterial elimination,positioning it as a promising candidate for advanced wound management strategies.
基金supported by the National Natural Science Foundation of China(21673142,21477164)the National High Technology Research and Development Program of China(863 Program,2015AA030903)~~
文摘Nanocatalysts consisting of three‐dimensionally ordered macroporous(3DOM)TiO2‐supported ultrafine Pd nanoparticles(Pd/3DOM‐TiO2‐GBMR)were readily fabricated by gas bubbling‐assisted membrane reduction(GBMR)method.These catalysts had a well‐defined and highly ordered macroporous nanostructure with an average pore size of 280 nm.In addition,ultrafine hemispherical Pd nanoparticles(NPs)with a mean particle size of 1.1 nm were found to be well dispersed over the surface of the 3DOM‐TiO2 support and deposited on the inner walls of the material.The nanostructure of the 3DOM‐TiO2 support ensured efficient contact between soot particles and the catalyst.The large interface area between the ultrafine Pd NPs and the TiO2 also increased the density of sites for O2 activation as a result of the strong metal(Pd)‐support(TiO2)interaction(SMSI).A Pd/3DOM‐TiO2‐GBMR catalyst with ultrafine Pd NPs(1.1 nm)exhibited higher catalytic activity during diesel soot combustion compared with that obtained from a specimen having relatively large Pd NPs(5.0 nm).The T10,T50 and T90 values obtained from the former were 295,370 and 415°C.Both the activity and nanostructure of the Pd/3DOM‐TiO2‐GBMR catalyst were stable over five replicate soot oxidation trials.These results suggest that nanocatalysts having a 3DOM structure together with ultrafine Pd NPs can decrease the amount of Pd required,and that this approach has potential practical applications in the catalytic combustion of diesel soot particles.
基金Financial support by NNSF(20277046)NSF(990274)+1 种基金EPA(1999-14)Sci.and Technol.Proj.(A3030502)of Guangdong and The Key Lab.of Environ.Sci.Technol.of Hennan.
文摘Ag-TiO2/ITO film electrode was used as photoanode to investigate the feasibility of a hybrid technology of Ag nanoparticles combined with the application of anodic bias. The results showed that the deposited Ag and applied anodic bias have an apparent additive effect.
文摘The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.
基金supported in part by the National Natural Science Foundation of China(21471043,21304028,51403195,31501576)~~
文摘We report a colloidal process to coat a layer of TiO2onto SiO2composite nanofibers containing embedded CdS and upconversion nanoparticles(UCNPs).The SiO2composite nanofibers were fabricated by electrospinning.To improve the energy transfer efficiency,UCNPs and CdS nanoparticles were bound in close proximity to each other within the SiO2matrix.β‐NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)core–shell nanoparticles were used as nanotransducers for near infrared light.These nanoparticles exhibited enhanced upconversion fluorescence compared withβ‐NaYF4:Yb(30%),Tm(0.5%)orβ–NaYF4:Yb(30%),Tm(0.5%)@NaYF4nanoparticles.The morphologies,size and chemical compositions have been extensively investigated using field emission scanning electron microscopy(FESEM),transmission electron microscopy(TEM),X‐ray diffraction(XRD)and X‐ray photoelectron spectra(XPS),respectively.The TEM images showed that the TiO2composite nanotubes were embedded with a large amount of UCNPs and CdS nanoparticles.The composite TiO2nanotubes degraded more than90%of rhodamine B(RhB)dye during20min of irradiation by simulated solar light.In particular,more than50%of RhB was decomposed in70min,under irradiation of near infrared light(NIR).This high degradation was attributed to the full spectrum absorption of solar light,and the enhanced transfer efficiency for near infrared light.The as‐prepared nanostructures can harness solar energy,and provide an alternative to overcome energy shortages and environmental protection.
基金supported by the National Key Research and Development Program of China(No.2021YFA1500401)National Natural Science Foundation of China(NSFC,Nos.21821003,22371304+3 种基金223B2123)Fundamental Research Funds for the Central Universities,Sun Yat-Sen University(No.24lgzy006)Science and Technology Innovation Special Support Project of Guangdong Province,China(No.STKJ2023078)the Guangzhou Science and Technology Program(No.SL2023A04J01767)。
文摘The efficient production of acetate through electrochemical CO_(2)reduction reaction(eCO_(2)RR)with low energy consumption has consistently been a challenging yet extremely significant task.Current catalysts suffered from high energy consumption and low relative purity of acetate product.Herein,we report ultrasmall Cu_(2)O nanoparticles with an average size of 2.5±0.09 nm immobilized on a conductive copper-based metal-organic framework(Cu-THQ)(denoted as Cu_(2)O@Cu-THQ),which attained a Faradaic efficiency of 65(3)%for acetate at a very low potential of-0.3 V vs.RHE with a current density of 10.5 m A/cm^(2).Importantly,as there are no other liquid phase products such as formate,methanol or ethanol,the relative purity of the obtained acetate product was as high as 100%.Taking into account the relative purity of the liquid product,current density,and energy consumption,the performance for electroreduction of CO_(2)to acetate of Cu_(2)O@Cu-THQ is not only much higher than that of the commercial Cu_(2)O nanoparticles,but also higher than those of all reported catalysts.Operando infrared spectroscopy and theoretical calculations indicated that the synergy effect between Cu-THQ and Cu_(2)O promoted the e CO_(2)RR to yield acetate.Specifically,the hydroxyl group on the organic ligand THQ in the Cu-THQ formed hydrogen bond interactions with the key C_(2)intermediates(*CH_(2)COOH and*HOCCOH)adsorbed on Cu_(2)O,which played a crucial role in stabilizing the key C_(2)intermediates and thus reduced the formation energy of the key C_(2) intermediates.
