The dominant status of coal on the energy production and consumption structure of China will not be changed in the middle period of this century. To realize highly efficient utilization of coal,low pollution and low c...The dominant status of coal on the energy production and consumption structure of China will not be changed in the middle period of this century. To realize highly efficient utilization of coal,low pollution and low cost are great and impendent tasks. These difficult problems can be almost resolved through establishing large-scale pithead power stations using two-stage highly efficient dry coal-cleaning system before coal burning,which is a highly efficient,clean and economical strategy considering the current energy and environmental status of China. All these will be discussed in detail in this paper.展开更多
Through the chemical pharmaceutical can better meet the demand of drug circulation, then in the drug quality control, put forward higher requirements. Doing a good job of cleaning drugs helps to improve the quality of...Through the chemical pharmaceutical can better meet the demand of drug circulation, then in the drug quality control, put forward higher requirements. Doing a good job of cleaning drugs helps to improve the quality of drugs. In fact, in some pharmaceutical companies, there are still some deficiencies in the cleaning process, which will affect the quality of drugs to a certain extent. In the field of chemical and pharmaceutical industry, in view of the status of cleaning process, this paper analyzes the problems that appear in it. At the same time, based on the root of the problems, some optimization suggestions are given, hoping to better implement the cleaning process and provide a strong guarantee for the safe use of drugs.展开更多
According to many years of experimental summary, the technical demands, process control, seed test, seed quality and work record （ledger management） of cleaning processing of feeding millet seeds in Hebei Province w...According to many years of experimental summary, the technical demands, process control, seed test, seed quality and work record （ledger management） of cleaning processing of feeding millet seeds in Hebei Province were studied, and specific measures and technical indicators of the technical regulations were analyzed to provide normalized, standardized, industrial and marketization technical support for the cleaning processing of feeding millet seeds.展开更多
Sodium chromate solubility is determined in the range of NaOH concentrations from 450 to 810 g/L andsolution temperatUres from 30 to 110℃. The optimized conditions to separate sodium chromate from NaOH inleached solu...Sodium chromate solubility is determined in the range of NaOH concentrations from 450 to 810 g/L andsolution temperatUres from 30 to 110℃. The optimized conditions to separate sodium chromate from NaOH inleached solution are resolved. It is first found the method to efficiently separate sbdium chromate from NaOH andsodium altuninate in crude sodium chromate. Bench-scale studies on the separating are performed. Finally, goodseparation results are achieved.展开更多
Striving for cleaner production is a sought-after manufacturing philosophy.Friction stir welding(FSW)is a joiningtechnique with par excellence and far less invasive to the environment than even best conventional weldi...Striving for cleaner production is a sought-after manufacturing philosophy.Friction stir welding(FSW)is a joiningtechnique with par excellence and far less invasive to the environment than even best conventional welding processes.It is energyefficient and free from consumables,affluent and radiations.It is,thus,accepted as a clean welding process that can produceacceptable quality joints.It suffers from some major challenges of defects of its own kind that subject the process open toimprovements so as to prove itself a reliable production process.This study presents a holistic characterization of defects commonlyfound in FSW joints.The finding of the present study reveals that most defects are caused by inadequate heat generation,impropermaterial movement around the pin and inadequate material consolidation behind the pin.The amount of heat generation andmaterial stirring depends on several FSW parameters which may lead to the defect formation,if not selected properly.The resultsreported in this work are derived from sound literature support and experimentation.Prescriptions are made in the form ofcharacteristics of defects such as likelihood of their location,main responsible parameters along with the recommendations forminimizing them.展开更多
In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches...In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches, in domes or even in the walls of buildings such as churches and houses. Our results show that laser ablation techniques is able to remove the surface impurity patina from artifacts surface without changes the chemical composition and the optical properties of ceramic. Moreover, because the laser cleaning heats only locally the surface of the sample, this method don＇t preclude the possibility to apply on artifact the thermo-luminescence dating process.展开更多
At present, the volume pipe cleaning methods mainly include diesel method and water-based method. The water-based method is widely used in the volume pipe cleaning of each handover station because of its low cost and ...At present, the volume pipe cleaning methods mainly include diesel method and water-based method. The water-based method is widely used in the volume pipe cleaning of each handover station because of its low cost and high safety. Due to the certain difference in structure between the two-way volume pipe and the one-way volume pipe, the consideration of cleaning flow is not perfect, which is easy to lead to high labor intensity, low cleaning efficiency and high cost. The purpose of this paper is to make use of the structural characteristics of two-way volume pipe, and reasonably plan the cleaning process, install small devices and optimize the stages of hot water circulation and reagent circulation in order to enhance the cleaning effect, improve the cleaning efficiency and reduce the cost.展开更多
The high quality of filler metals are required by the equipment manufacturing industry to obtain the high- performance brazed joint. For the problems of impurities in filler metal, the concept of entropy has been carr...The high quality of filler metals are required by the equipment manufacturing industry to obtain the high- performance brazed joint. For the problems of impurities in filler metal, the concept of entropy has been carried out to describe the cleanness of filler metal. The math expressions of process entropy, Sp, and performance entropy, Sf , have been presented. Sp characterizes the manufacturability of filler metal, corresponding to the spreading coefficient and the viscosity. SI characterizes the mechanical property of the brazed joint, corresponding to the tensile strength and the shear strength. With the inerease of entropy value, the cleanness as well as the brazability of filler metal and the mechanical property of joint deteriorate. The physical verification indicates that the expressions of St, and Sf could characterize the cleanness of filler metal.展开更多
High voltage lines are one of the main ways for carrying electric energy. To do so high voltage insulators are needed to insulate these lines from the supporting towers. Glass, ceramic and polymer insulators are widel...High voltage lines are one of the main ways for carrying electric energy. To do so high voltage insulators are needed to insulate these lines from the supporting towers. Glass, ceramic and polymer insulators are widely used. Generally high voltage insulators are exposed to weather where humidity, from rain and moist, together with pollution allows accumulation of unwanted material on the surface of the insulator. Cleaning procedures are then needed to remove such material and avoid short-circuiting. The most commonly used cleaning methods are hand cleaning using chemicals that need turning off the main and water jet, which allows keeping the line in service. In this work we explore the possibility of using laser ablation for cleaning high voltage ceramic insulators. It is demonstrated that cleaning can be accomplished by a two-step process. First a Q-switched Nd: YAG laser is used to ablate the unwanted material. The second step is to use a free running Nd: YAG laser to restore the surface hydrophobicity of ceramic insulator, which is affected in the first process step.展开更多
As a simple, reproducible, and pollution-free technique with the potential of integration and automation, laser processing has attracted increasing attention. Laser processing, which includes laser polishing, laser cl...As a simple, reproducible, and pollution-free technique with the potential of integration and automation, laser processing has attracted increasing attention. Laser processing, which includes laser polishing, laser cleaning,and fabrication of laser-induced micro-/nano-structures, has been demonstrated to yield smooth, clean, functional surfaces and effective joining. Laser polishing is an advanced, highly efficient, and ecofriendly polishing technology. This study demonstrated the laser polishing of a selective laser-melted Inconel 718(IN718) superalloy and a titanium alloy sample. The surface roughnesses Raand Rzof the IN718 superalloy were respectively reduced from 8 and 33 μm to 0.2 and 0.8 μm, and the Raof the titanium alloy was reduced from 9.8 μm to 0.2 μm.Moreover, the wear resistance and corrosion resistance of the IN718 were apparently improved. As another surface-related processing method, laser cleaning was used to clean terminal blocks. Almost all the contaminants were removed, as verified by the absence of their chemical compositions and the decreased surface roughness. In addition, a superhydrophobic surface with a contact angle of over 160° and sliding angle of b8° on stainless steel was obtained by laser texturing treatment. These results demonstrate the high potential of laser processing in the scientific, technological, and industrial fields.展开更多
文摘The dominant status of coal on the energy production and consumption structure of China will not be changed in the middle period of this century. To realize highly efficient utilization of coal,low pollution and low cost are great and impendent tasks. These difficult problems can be almost resolved through establishing large-scale pithead power stations using two-stage highly efficient dry coal-cleaning system before coal burning,which is a highly efficient,clean and economical strategy considering the current energy and environmental status of China. All these will be discussed in detail in this paper.
文摘Through the chemical pharmaceutical can better meet the demand of drug circulation, then in the drug quality control, put forward higher requirements. Doing a good job of cleaning drugs helps to improve the quality of drugs. In fact, in some pharmaceutical companies, there are still some deficiencies in the cleaning process, which will affect the quality of drugs to a certain extent. In the field of chemical and pharmaceutical industry, in view of the status of cleaning process, this paper analyzes the problems that appear in it. At the same time, based on the root of the problems, some optimization suggestions are given, hoping to better implement the cleaning process and provide a strong guarantee for the safe use of drugs.
基金Supported by Special Fund for Agro-scientific Research in the Public Interest(20120304201)~~
文摘According to many years of experimental summary, the technical demands, process control, seed test, seed quality and work record （ledger management） of cleaning processing of feeding millet seeds in Hebei Province were studied, and specific measures and technical indicators of the technical regulations were analyzed to provide normalized, standardized, industrial and marketization technical support for the cleaning processing of feeding millet seeds.
文摘Sodium chromate solubility is determined in the range of NaOH concentrations from 450 to 810 g/L andsolution temperatUres from 30 to 110℃. The optimized conditions to separate sodium chromate from NaOH inleached solution are resolved. It is first found the method to efficiently separate sbdium chromate from NaOH andsodium altuninate in crude sodium chromate. Bench-scale studies on the separating are performed. Finally, goodseparation results are achieved.
基金the University Grants Commission (UGC) for its financial assistance (vide sanction order No. F.3-40/2012(SAP-Ⅱ)) under its SAP (DRS-Ⅰ) sanctioned to the Department of Mechanical Engineering for the project entitled Friction Stir Welding and Ultrasonic Machiningfinancially supported by the King Saud University, Vice Deanship of Research Chairs
文摘Striving for cleaner production is a sought-after manufacturing philosophy.Friction stir welding(FSW)is a joiningtechnique with par excellence and far less invasive to the environment than even best conventional welding processes.It is energyefficient and free from consumables,affluent and radiations.It is,thus,accepted as a clean welding process that can produceacceptable quality joints.It suffers from some major challenges of defects of its own kind that subject the process open toimprovements so as to prove itself a reliable production process.This study presents a holistic characterization of defects commonlyfound in FSW joints.The finding of the present study reveals that most defects are caused by inadequate heat generation,impropermaterial movement around the pin and inadequate material consolidation behind the pin.The amount of heat generation andmaterial stirring depends on several FSW parameters which may lead to the defect formation,if not selected properly.The resultsreported in this work are derived from sound literature support and experimentation.Prescriptions are made in the form ofcharacteristics of defects such as likelihood of their location,main responsible parameters along with the recommendations forminimizing them.
文摘In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches, in domes or even in the walls of buildings such as churches and houses. Our results show that laser ablation techniques is able to remove the surface impurity patina from artifacts surface without changes the chemical composition and the optical properties of ceramic. Moreover, because the laser cleaning heats only locally the surface of the sample, this method don＇t preclude the possibility to apply on artifact the thermo-luminescence dating process.
文摘At present, the volume pipe cleaning methods mainly include diesel method and water-based method. The water-based method is widely used in the volume pipe cleaning of each handover station because of its low cost and high safety. Due to the certain difference in structure between the two-way volume pipe and the one-way volume pipe, the consideration of cleaning flow is not perfect, which is easy to lead to high labor intensity, low cleaning efficiency and high cost. The purpose of this paper is to make use of the structural characteristics of two-way volume pipe, and reasonably plan the cleaning process, install small devices and optimize the stages of hot water circulation and reagent circulation in order to enhance the cleaning effect, improve the cleaning efficiency and reduce the cost.
文摘The high quality of filler metals are required by the equipment manufacturing industry to obtain the high- performance brazed joint. For the problems of impurities in filler metal, the concept of entropy has been carried out to describe the cleanness of filler metal. The math expressions of process entropy, Sp, and performance entropy, Sf , have been presented. Sp characterizes the manufacturability of filler metal, corresponding to the spreading coefficient and the viscosity. SI characterizes the mechanical property of the brazed joint, corresponding to the tensile strength and the shear strength. With the inerease of entropy value, the cleanness as well as the brazability of filler metal and the mechanical property of joint deteriorate. The physical verification indicates that the expressions of St, and Sf could characterize the cleanness of filler metal.
文摘High voltage lines are one of the main ways for carrying electric energy. To do so high voltage insulators are needed to insulate these lines from the supporting towers. Glass, ceramic and polymer insulators are widely used. Generally high voltage insulators are exposed to weather where humidity, from rain and moist, together with pollution allows accumulation of unwanted material on the surface of the insulator. Cleaning procedures are then needed to remove such material and avoid short-circuiting. The most commonly used cleaning methods are hand cleaning using chemicals that need turning off the main and water jet, which allows keeping the line in service. In this work we explore the possibility of using laser ablation for cleaning high voltage ceramic insulators. It is demonstrated that cleaning can be accomplished by a two-step process. First a Q-switched Nd: YAG laser is used to ablate the unwanted material. The second step is to use a free running Nd: YAG laser to restore the surface hydrophobicity of ceramic insulator, which is affected in the first process step.
基金National Key Research and Development Program of China under Grant 2018YFB1107700, 2018YFB1107400, and 2016YFB1102503National Key Basic Research Program of China under Grant 2015CB059900+1 种基金National Natural Science Foundation of China under Grant 51705013Beijing Natural Science Foundation under Grant J170002
文摘As a simple, reproducible, and pollution-free technique with the potential of integration and automation, laser processing has attracted increasing attention. Laser processing, which includes laser polishing, laser cleaning,and fabrication of laser-induced micro-/nano-structures, has been demonstrated to yield smooth, clean, functional surfaces and effective joining. Laser polishing is an advanced, highly efficient, and ecofriendly polishing technology. This study demonstrated the laser polishing of a selective laser-melted Inconel 718(IN718) superalloy and a titanium alloy sample. The surface roughnesses Raand Rzof the IN718 superalloy were respectively reduced from 8 and 33 μm to 0.2 and 0.8 μm, and the Raof the titanium alloy was reduced from 9.8 μm to 0.2 μm.Moreover, the wear resistance and corrosion resistance of the IN718 were apparently improved. As another surface-related processing method, laser cleaning was used to clean terminal blocks. Almost all the contaminants were removed, as verified by the absence of their chemical compositions and the decreased surface roughness. In addition, a superhydrophobic surface with a contact angle of over 160° and sliding angle of b8° on stainless steel was obtained by laser texturing treatment. These results demonstrate the high potential of laser processing in the scientific, technological, and industrial fields.
