AIM: To validate accuracy of a novel chair-side test for matrix metalloproteinase(MMP)-8 as compared to enzyme-linked immunosorbent assay(ELISA) in Periodontal health and disease.METHODS: Gingival crevicular fluid was...AIM: To validate accuracy of a novel chair-side test for matrix metalloproteinase(MMP)-8 as compared to enzyme-linked immunosorbent assay(ELISA) in Periodontal health and disease.METHODS: Gingival crevicular fluid was collected from 150 subjects, Group 1(healthy)- 50 subjects, Group 2(gingivitis)- 50 subjects and Group 3(chronic periodontitis)- 50 subjects. A chair-side test strip was indigenously prepared using polyclonal antibodies(principle of immunochromatography) to detect the MMP-8 levels. The detection accuracy(sensitivity and specificity) of the MMP-8 levels by chair-side test kit were compared with ELISA at baseline and 3 mo after scaling and root planing among the study population.RESULTS: The novel chair side test detected MMP-8 levels in accordance with ELISA which at baseline were higher in Group 2 and Group 3 as compared to controls(P < 0.05), and these enzyme levels decreased after therapy(P < 0.05). The chair-side test could differentiate healthy, gingivitis and periodontitis. The detection accuracy of the chair-side test strip were on par with ELISA(sensitivity 92.9% and specificity of 100%) which were statistically significant(P < 0.05). A desire to arouse interest about periodontal health and maintenance in the Indian population provided a strong rationale for us to develop our chair-side test strips to suit our economy. Moreover, this was the first ever effort to develop and validate a chair-side test strip to detect MMP-8 levels in the Indian population. This test can be used on a large scale in private dental practice for the early detection of disease, tapping the sites at risk for disease, alongside helps in patient education and motivation for maintenance.CONCLUSION: This study shows that the novel chair side test kit detects MMP-8 levels a biomarker of periodontal disease progression accurately making it a good chair side diagnostic tool. Further, it is cost effective and time saving which can make it applicable in private dental practice on a large scale for the early detection of periodontal disease.展开更多
Test case prioritization and ranking play a crucial role in software testing by improving fault detection efficiency and ensuring software reliability.While prioritization selects the most relevant test cases for opti...Test case prioritization and ranking play a crucial role in software testing by improving fault detection efficiency and ensuring software reliability.While prioritization selects the most relevant test cases for optimal coverage,ranking further refines their execution order to detect critical faults earlier.This study investigates machine learning techniques to enhance both prioritization and ranking,contributing to more effective and efficient testing processes.We first employ advanced feature engineering alongside ensemble models,including Gradient Boosted,Support Vector Machines,Random Forests,and Naive Bayes classifiers to optimize test case prioritization,achieving an accuracy score of 0.98847 and significantly improving the Average Percentage of Fault Detection(APFD).Subsequently,we introduce a deep Q-learning framework combined with a Genetic Algorithm(GA)to refine test case ranking within priority levels.This approach achieves a rank accuracy of 0.9172,demonstrating robust performance despite the increasing computational demands of specialized variation operators.Our findings highlight the effectiveness of stacked ensemble learning and reinforcement learning in optimizing test case prioritization and ranking.This integrated approach improves testing efficiency,reduces late-stage defects,and improves overall software stability.The study provides valuable information for AI-driven testing frameworks,paving the way for more intelligent and adaptive software quality assurance methodologies.展开更多
With the rapid development of artificial intelligence,the intelligence level of software is increasingly improving.Intelligent software,which is widely applied in crucial fields such as autonomous driving,intelligent ...With the rapid development of artificial intelligence,the intelligence level of software is increasingly improving.Intelligent software,which is widely applied in crucial fields such as autonomous driving,intelligent customer service,and medical diagnosis,is constructed based on complex technologies like machine learning and deep learning.Its uncertain behavior and data dependence pose unprecedented challenges to software testing.However,existing software testing courses mainly focus on conventional contents and are unable to meet the requirements of intelligent software testing.Therefore,this work deeply analyzed the relevant technologies of intelligent software testing,including reliability evaluation indicator system,neuron coverage,and test case generation.It also systematically designed an intelligent software testing course,covering teaching objectives,teaching content,teaching methods,and a teaching case.Verified by the practical teaching in four classes,this course has achieved remarkable results,providing practical experience for the reform of software testing courses.展开更多
Members of the British Textile Machinery Association(BTMA)can look back on 2025 as a year marked by notable technological advances and continued progress in global trade,despite an uncertain and volatile market.“Our ...Members of the British Textile Machinery Association(BTMA)can look back on 2025 as a year marked by notable technological advances and continued progress in global trade,despite an uncertain and volatile market.“Our members have been very active over the past 12 months and this has resulted in new technologies for the production of technical fibres and fabrics,the introduction of AI and machine learning into process control systems and significant advances in materials testing,”says BTMA CEO Jason Kent.“There’s real excitement about what can be achieved in 2026 as we look ahead to upcoming exhibitions such as JEC Composites in Paris in March and Techtextil in Frankfurt in April.”展开更多
With the rapid development of Internet technology,REST APIs(Representational State Transfer Application Programming Interfaces)have become the primary communication standard in modern microservice architectures,raisin...With the rapid development of Internet technology,REST APIs(Representational State Transfer Application Programming Interfaces)have become the primary communication standard in modern microservice architectures,raising increasing concerns about their security.Existing fuzz testing methods include random or dictionary-based input generation,which often fail to ensure both syntactic and semantic correctness,and OpenAPIbased approaches,which offer better accuracy but typically lack detailed descriptions of endpoints,parameters,or data formats.To address these issues,this paper proposes the APIDocX fuzz testing framework.It introduces a crawler tailored for dynamic web pages that automatically simulates user interactions to trigger APIs,capturing and extracting parameter information from communication packets.A multi-endpoint parameter adaptation method based on improved Jaccard similarity is then used to generalize these parameters to other potential API endpoints,filling in gaps in OpenAPI specifications.Experimental results demonstrate that the extracted parameters can be generalized with 79.61%accuracy.Fuzz testing using the enriched OpenAPI documents leads to improvements in test coverage,the number of valid test cases generated,and fault detection capabilities.This approach offers an effective enhancement to automated REST API security testing.展开更多
Cloud services,favored by many enterprises due to their high flexibility and easy operation,are widely used for data storage and processing.However,the high latency,together with transmission overheads of the cloud ar...Cloud services,favored by many enterprises due to their high flexibility and easy operation,are widely used for data storage and processing.However,the high latency,together with transmission overheads of the cloud architecture,makes it difficult to quickly respond to the demands of IoT applications and local computation.To make up for these deficiencies in the cloud,fog computing has emerged as a critical role in the IoT applications.It decentralizes the computing power to various lower nodes close to data sources,so as to achieve the goal of low latency and distributed processing.With the data being frequently exchanged and shared between multiple nodes,it becomes a challenge to authorize data securely and efficiently while protecting user privacy.To address this challenge,proxy re-encryption(PRE)schemes provide a feasible way allowing an intermediary proxy node to re-encrypt ciphertext designated for different authorized data requesters without compromising any plaintext information.Since the proxy is viewed as a semi-trusted party,it should be taken to prevent malicious behaviors and reduce the risk of data leakage when implementing PRE schemes.This paper proposes a new fog-assisted identity-based PRE scheme supporting anonymous key generation,equality test,and user revocation to fulfill various IoT application requirements.Specifically,in a traditional identity-based public key architecture,the key escrow problem and the necessity of a secure channel are major security concerns.We utilize an anonymous key generation technique to solve these problems.The equality test functionality further enables a cloud server to inspect whether two candidate trapdoors contain an identical keyword.In particular,the proposed scheme realizes fine-grained user-level authorization while maintaining strong key confidentiality.To revoke an invalid user identity,we add a revocation list to the system flows to restrict access privileges without increasing additional computation cost.To ensure security,it is shown that our system meets the security notion of IND-PrID-CCA and OW-ID-CCA under the Decisional Bilinear Diffie-Hellman(DBDH)assumption.展开更多
Lateral flow immunoassays(LFIAs)are low-cost,rapid,and easy to use for pointof-care testing(POCT),but the majority of the available LFIA tests are indicative,rather than quantitative,and their sensitivity in antigen t...Lateral flow immunoassays(LFIAs)are low-cost,rapid,and easy to use for pointof-care testing(POCT),but the majority of the available LFIA tests are indicative,rather than quantitative,and their sensitivity in antigen tests are usually limited at the nanogram range,which is primarily due to the passive capillary fluidics through nitrocellulose membranes,often associated with non-specific bindings and high background noise.To overcome this challenge,we report a Beads-on-a-Tip design by replacing nitrocellulose membranes with a pipette tip loaded with magnetic beads.The beads are pre-conjugated with capture antibodies that support a typical sandwich immunoassay.This design enriches the low-abundant antigen proteins and allows an active washing process to significantly reduce non-specific bindings.To further improve the detection sensitivity,we employed upconversion nanoparticles(UCNPs)as luminescent reporters and SARS-CoV-2 spike(S)antigen as a model analyte to benchmark the performance of this design against our previously reported methods.We found that the key to enhance the immunocomplex formation and signal-to-noise ratio lay in optimizing incubation time and the UCNP-to-bead ratio.We therefore successfully demonstrated that the new method can achieve a very large dynamic range from 500 fg/mL to 10μg/mL,across over 7 digits,and a limit of detection of 706 fg/mL,nearly another order of magnitude lower than the best reported LFIA using UCNPs in COVID-19 spike antigen detection.Our system offers a promising solution for ultra-sensitive and quantitative POCT diagnostics.展开更多
The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from...The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from the rack vehicle in traction conditions,a systematic test of the track subsystem was carried out on a large-slope test line.In the test,the bending stress of the rack teeth,the wheel-rail forces,and the acceleration of crucial components in the track system were measured.Subsequently,a detailed analysis was conducted on the tested signals of the rack railway track system in the time domain and the time-frequency domains.The test results indicate that the traction force significantly affects the rack tooth bending stress and the wheel-rail forces.The vibrations of the track system under the traction conditions are mainly caused by the impacts generated from the gear-rack engagement,which are then transferred to the sleepers,the rails,and the ballast beds.Furthermore,both the maximum stress on the racks and the wheel-rail forces measured on the rails remain below their allowable values.This experimental study evaluates the load characteristics and reveals the vibration characteristics of the rack railway track system under the vehicle’s ultimate load,which is very important for the load-strengthening design of the key components such as racks and the vibration and noise reduction of the track system.展开更多
Parallel machining robot is a new type of robotized equipment for high-efficiency machining structural com-ponents with complex geometries.Terminal rigidity is of great importance index for such type of equipment,whic...Parallel machining robot is a new type of robotized equipment for high-efficiency machining structural com-ponents with complex geometries.Terminal rigidity is of great importance index for such type of equipment,which affects their load capacity and working accuracy.Before a parallel machining robot can be used for heavy-load and high-efficiency machining,its terminal rigidity should be evaluated systematically.The present study is to quantitatively reveal the stiffness properties of a previously invented Z4 redundantly actuated parallel ma-chining robot(RAPMR).For this purpose,two critical issues,i.e.,stiffness modelling and index construction,are clarified to carry out stiffness evaluation of the Z4 RAPMR.Firstly,drawing on the screw theory,a semi-analytic stiffness model of the proposed RAPMR is established at a component level.Secondly,a set of virtual work-based stiffness indices is constructed to evaluate the terminal rigidity of parallel robots.Those indices have a consistent physical unit in describing linear and angular terminal rigidity.With these indices,the local and the global stiffness performance of the Z4 RAPMR are predicted.Thirdly,a laboratory prototype of the proposed RAPMR is fabricated.And the experimental test is performed to verify the correctness of the established stiffness model.The present work is expected to provide fundamental information for further light-weight design and rigidity enhancement.展开更多
Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluatio...Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluation of their seismic performance is important and cannot be ignored.To investigate the seismic performance of large-sized high performance concrete cladding(HPCC),a series of full-scale experimental tests were conducted using a unidirectional shaking table.A steel supporting frame was used to install the HPCCs and reproduce the effects of the building under earthquake.The tests were divided into two parts:in-plane(IP)testing and out-plane(OP)testing.Three recorded accelerograms,one artificial accelerogram,and one sinusoidal accelerogram were used to conduct the shaking table tests.The results show that the maximum recorded IP responses of acceleration and interstory drift ratio were 1.04 g and 1/97,while the OP responses were 1.02 g and 1/51.The HPCCs functioned well throughout the entire experimental protocol.The fundamental frequency of the HPCCs systems rarely changed after the tests.展开更多
The stress-strain behavior of calcareous sand is significantly influencedby particle breakage(B)and initial relative density(Dri),but few constitutive models consider their combined effects.To bridge this gap,we condu...The stress-strain behavior of calcareous sand is significantly influencedby particle breakage(B)and initial relative density(Dri),but few constitutive models consider their combined effects.To bridge this gap,we conducted a series of triaxial tests on calcareous sand with varying Dri and stress paths,examining particle breakage and critical state behavior.Key findingsinclude:(1)At a constant stress ratio(η),B follows a hyperbolic relationship with mean effective stress(p'),and for a given p',B increases proportionally withη;(2)The critical state line(CSL)moves downward with increasing Dri,whereas the critical state friction angle(φcs)decreases with increasing B.Based on these findings,we propose a unifiedbreakage evolution model to quantify particle breakage in calcareous sand under various loading conditions.Integrating this model with the Normal Consolidation Line(NCL)and CSL equations,we successfully simulate the steepening of NCL and CSL slopes as B increases with the onset of particle breakage.Furthermore,we quantitatively evaluate the effect of B onφcs.Finally,within the framework of Critical State Soil Mechanics and Hypoplasticity theory,we develop a hypoplastic model incorporating B and Dri.The model is validated through strong agreement with experimental results across various initial relative densities,stress paths and drainage conditions.展开更多
Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance fo...Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance for mass screening of cancer,so the cost-effective and simple detection methods of sEVpp are urgently demanded.Herein,we constructed a paper-based multichannel sEVpp POCT device(sEVpp-PAD)enabled by functional DNA probes and metal-organic framework(MOF).The core components are aptamer/MOF-modified paper chips.The modified aptamers can immunocapture the sEV expressing corresponding proteins,while the modified MOF can provide abundant sites for aptamer-modification,reduce the nonspecific protein absorption,and act as reference for ratiometric detection.Simply powered by two syringes,the sEVpp-PAD can efficiently capture sEVs expressing corresponding protein from cell culture media and sera.Furthermore,a detection probe(DP)consisted of CD63 aptamer and G-quadruplex was developed for the colorimetric detection of captured sEVs.Utilizing this device,the sEVpp in various hepatocellular carcinoma cell culture medium and,more importantly,in human sera can be accurately determined,only with$2 device,$0.2 detection reagents and 1.8 h procedure.This simple strategy for sEVpp detection can innovatively promote the POCT and subtyping of cancer based on sEV-related liquid biopsy.展开更多
X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system ...X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.展开更多
Underwater gas-liquid two-phase propulsion technology is an emerging propulsion method that offers high efficiency and unrestricted navigation speed.The integration of this technology into water ramjet engines can sig...Underwater gas-liquid two-phase propulsion technology is an emerging propulsion method that offers high efficiency and unrestricted navigation speed.The integration of this technology into water ramjet engines can significantly enhance propulsion efficiency and holds substantial potential for broad applications.However,forming a gas-liquid two-phase flow within the nozzle requires introducing a large amount of rammed seawater.At this time,there is a complex phase transition problem of combustion products in the combustion chamber,which makes the thermodynamic calculation for gas-liquid two-phase water ramjet engines particularly challenging.This paper proposes a thermodynamic calculation method for gas-liquid two-phase water ramjet engines,based on the energy equation for gas-liquid two-phase flow and traditional thermodynamic principles,enabling thermodynamic calculations under conditions of ultra-high water-fuel ratios.Additionally,ground ignition tests of the gas-liquid two-phase engine were conducted,yielding critical engine test parameters.The results demonstrate that the gas-liquid two-phase water ramjet engine achieves a high specific impulse,with a theoretical maximum specific impulse of up to 7000(N s)/kg.The multiphase flow effects significantly impact engine performance,with specific impulse losses reaching up to 25.86%.The error between the thrust and specific impulse in the ground test and the theoretical values is within 10%,validating the proposed thermodynamic calculation method as a reliable reference for further research on gas-liquid two-phase water ramjet engines.展开更多
In real-world autonomous driving tests,unexpected events such as pedestrians or wild animals suddenly entering the driving path can occur.Conducting actual test drives under various weather conditions may also lead to...In real-world autonomous driving tests,unexpected events such as pedestrians or wild animals suddenly entering the driving path can occur.Conducting actual test drives under various weather conditions may also lead to dangerous situations.Furthermore,autonomous vehicles may operate abnormally in bad weather due to limitations of their sensors and GPS.Driving simulators,which replicate driving conditions nearly identical to those in the real world,can drastically reduce the time and cost required for market entry validation;consequently,they have become widely used.In this paper,we design a virtual driving test environment capable of collecting and verifying SiLS data under adverse weather conditions using multi-source images.The proposed method generates a virtual testing environment that incorporates various events,including weather,time of day,and moving objects,that cannot be easily verified in real-world autonomous driving tests.By setting up scenario-based virtual environment events,multi-source image analysis and verification using real-world DCUs(Data Concentrator Units)with V2X-Car edge cloud can effectively address risk factors that may arise in real-world situations.We tested and validated the proposed method with scenarios employing V2X communication and multi-source image analysis.展开更多
High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear beh...High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.展开更多
Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining...Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.展开更多
Objective:To analyze factors affecting the utilization of human immunodeficiency virus counseling and testing(HCT)service among human immunodeficiency virus risk groups at Hessa Air Genting Health Center,Asahan Regenc...Objective:To analyze factors affecting the utilization of human immunodeficiency virus counseling and testing(HCT)service among human immunodeficiency virus risk groups at Hessa Air Genting Health Center,Asahan Regency,North Sumatera,Indonesia.Methods:This quantitative unmatched case-control study was conducted from April 2024 to April 2025 at Hessa Air Genting Health Center,Asahan Regency,North Sumatra Province,Indonesia.Female sex workers and men who have sex with men were selected using purposive sampling based on predefined inclusion and exclusion criteria.Data were collected via questionnaires and analyzed using SPSS version 18.0,with univariate analysis,bivariate analysis(Chi-square test),and multivariate analysis(logistic regression analysis).Results:Comprehensive analysis of 75 cases and 75 controls was conducted to identify factors affecting the utilization of HCT services.Specifically,this study identified significant effects of knowledge(OR 3.2,95%CI 1.5-7.0,P=0.003),perception(OR 5.6,95%CI 2.5-12.5,P<0.001),information media(OR 3.1,95%CI 1.4-6.8,P=0.005),and health workers encouragement(OR 4.0,95%CI 1.5-10.4,P=0.005).In contrast,access to health services did not have a significant effect.Conclusions:Knowledge,perception,information media,and health worker encouragement had significant effects on HCT service utilization,with perception identified as the dominant factor.To improve utilization,strengthening positive perceptions,targeted training for healthcare workers,strengthened partnerships with local non-governmental organizations,and the use of social media for health promotion are recommended.展开更多
For India to achieve elimination by 2030,the challenges posed by Plasmodium(P.)vivax cannot be overlooked owing to its burden and unique biology.In 2023,in India,about 224000 malaria cases were reported,and a signific...For India to achieve elimination by 2030,the challenges posed by Plasmodium(P.)vivax cannot be overlooked owing to its burden and unique biology.In 2023,in India,about 224000 malaria cases were reported,and a significant proportion(40%)were P.vivax cases.In P.vivax infection,the persistence of dormant liver stage of parasite,i.e.,hypnozoites,leading to relapses weeks or months later poses challenge in its elimination.展开更多
It is challenging to diagnose isolated hyperbilirubinemia with rare and complex etiologies under the constraints of traditional testing conditions.Herein,we present a rare case of coexisting Gilbert syndrome(GS)and er...It is challenging to diagnose isolated hyperbilirubinemia with rare and complex etiologies under the constraints of traditional testing conditions.Herein,we present a rare case of coexisting Gilbert syndrome(GS)and erythropoietic protoporphyria(EPP),which has not been previously documented.CASE SUMMARY We present a rare case of coexisting GS and EPP in a 23-year-old Chinese male with a long history of jaundice and recently found splenomegaly.Serial nonspecific hemolysis screening tests yielded inconsistent results,and investigations for common hemolytic etiologies were negative.However,Levitt’s carbon monoxide breath test,which measures erythrocyte lifespan(the gold-standard marker of hemolysis),demonstrated significant hemolysis,revealing a markedly shortened erythrocyte lifespan of 11 days(normal average 120 days).Genetic testing subsequently confirmed EPP with a homozygous ferrochelatase gene mutation and GS with a heterozygous uridine diphosphate glucuronosyl trans-ferase 1A1 gene mutation.CONCLUSION The rapid,non-invasive Levitt’s carbon monoxide breath test resolved the diagnostic challenge posed by a rare and complex cause of hyperbilirubinemia.展开更多
文摘AIM: To validate accuracy of a novel chair-side test for matrix metalloproteinase(MMP)-8 as compared to enzyme-linked immunosorbent assay(ELISA) in Periodontal health and disease.METHODS: Gingival crevicular fluid was collected from 150 subjects, Group 1(healthy)- 50 subjects, Group 2(gingivitis)- 50 subjects and Group 3(chronic periodontitis)- 50 subjects. A chair-side test strip was indigenously prepared using polyclonal antibodies(principle of immunochromatography) to detect the MMP-8 levels. The detection accuracy(sensitivity and specificity) of the MMP-8 levels by chair-side test kit were compared with ELISA at baseline and 3 mo after scaling and root planing among the study population.RESULTS: The novel chair side test detected MMP-8 levels in accordance with ELISA which at baseline were higher in Group 2 and Group 3 as compared to controls(P < 0.05), and these enzyme levels decreased after therapy(P < 0.05). The chair-side test could differentiate healthy, gingivitis and periodontitis. The detection accuracy of the chair-side test strip were on par with ELISA(sensitivity 92.9% and specificity of 100%) which were statistically significant(P < 0.05). A desire to arouse interest about periodontal health and maintenance in the Indian population provided a strong rationale for us to develop our chair-side test strips to suit our economy. Moreover, this was the first ever effort to develop and validate a chair-side test strip to detect MMP-8 levels in the Indian population. This test can be used on a large scale in private dental practice for the early detection of disease, tapping the sites at risk for disease, alongside helps in patient education and motivation for maintenance.CONCLUSION: This study shows that the novel chair side test kit detects MMP-8 levels a biomarker of periodontal disease progression accurately making it a good chair side diagnostic tool. Further, it is cost effective and time saving which can make it applicable in private dental practice on a large scale for the early detection of periodontal disease.
文摘Test case prioritization and ranking play a crucial role in software testing by improving fault detection efficiency and ensuring software reliability.While prioritization selects the most relevant test cases for optimal coverage,ranking further refines their execution order to detect critical faults earlier.This study investigates machine learning techniques to enhance both prioritization and ranking,contributing to more effective and efficient testing processes.We first employ advanced feature engineering alongside ensemble models,including Gradient Boosted,Support Vector Machines,Random Forests,and Naive Bayes classifiers to optimize test case prioritization,achieving an accuracy score of 0.98847 and significantly improving the Average Percentage of Fault Detection(APFD).Subsequently,we introduce a deep Q-learning framework combined with a Genetic Algorithm(GA)to refine test case ranking within priority levels.This approach achieves a rank accuracy of 0.9172,demonstrating robust performance despite the increasing computational demands of specialized variation operators.Our findings highlight the effectiveness of stacked ensemble learning and reinforcement learning in optimizing test case prioritization and ranking.This integrated approach improves testing efficiency,reduces late-stage defects,and improves overall software stability.The study provides valuable information for AI-driven testing frameworks,paving the way for more intelligent and adaptive software quality assurance methodologies.
基金Computer Basic Education Teaching Research Project of Association of Fundamental Computing Education in Chinese Universities(Nos.2025-AFCEC-527 and 2024-AFCEC-088)Research on the Reform of Public Course Teaching at Nantong College of Science and Technology(No.2024JGG015).
文摘With the rapid development of artificial intelligence,the intelligence level of software is increasingly improving.Intelligent software,which is widely applied in crucial fields such as autonomous driving,intelligent customer service,and medical diagnosis,is constructed based on complex technologies like machine learning and deep learning.Its uncertain behavior and data dependence pose unprecedented challenges to software testing.However,existing software testing courses mainly focus on conventional contents and are unable to meet the requirements of intelligent software testing.Therefore,this work deeply analyzed the relevant technologies of intelligent software testing,including reliability evaluation indicator system,neuron coverage,and test case generation.It also systematically designed an intelligent software testing course,covering teaching objectives,teaching content,teaching methods,and a teaching case.Verified by the practical teaching in four classes,this course has achieved remarkable results,providing practical experience for the reform of software testing courses.
文摘Members of the British Textile Machinery Association(BTMA)can look back on 2025 as a year marked by notable technological advances and continued progress in global trade,despite an uncertain and volatile market.“Our members have been very active over the past 12 months and this has resulted in new technologies for the production of technical fibres and fabrics,the introduction of AI and machine learning into process control systems and significant advances in materials testing,”says BTMA CEO Jason Kent.“There’s real excitement about what can be achieved in 2026 as we look ahead to upcoming exhibitions such as JEC Composites in Paris in March and Techtextil in Frankfurt in April.”
基金supported by the Open Foundation of Key Laboratory of Cyberspace Security,Ministry of Education of China(KLCS20240211)。
文摘With the rapid development of Internet technology,REST APIs(Representational State Transfer Application Programming Interfaces)have become the primary communication standard in modern microservice architectures,raising increasing concerns about their security.Existing fuzz testing methods include random or dictionary-based input generation,which often fail to ensure both syntactic and semantic correctness,and OpenAPIbased approaches,which offer better accuracy but typically lack detailed descriptions of endpoints,parameters,or data formats.To address these issues,this paper proposes the APIDocX fuzz testing framework.It introduces a crawler tailored for dynamic web pages that automatically simulates user interactions to trigger APIs,capturing and extracting parameter information from communication packets.A multi-endpoint parameter adaptation method based on improved Jaccard similarity is then used to generalize these parameters to other potential API endpoints,filling in gaps in OpenAPI specifications.Experimental results demonstrate that the extracted parameters can be generalized with 79.61%accuracy.Fuzz testing using the enriched OpenAPI documents leads to improvements in test coverage,the number of valid test cases generated,and fault detection capabilities.This approach offers an effective enhancement to automated REST API security testing.
基金supported in part by the National Science and Technology Council of Taiwan under the contract numbers NSTC 114-2221-E-019-055-MY2 and NSTC 114-2221-E-019-069.
文摘Cloud services,favored by many enterprises due to their high flexibility and easy operation,are widely used for data storage and processing.However,the high latency,together with transmission overheads of the cloud architecture,makes it difficult to quickly respond to the demands of IoT applications and local computation.To make up for these deficiencies in the cloud,fog computing has emerged as a critical role in the IoT applications.It decentralizes the computing power to various lower nodes close to data sources,so as to achieve the goal of low latency and distributed processing.With the data being frequently exchanged and shared between multiple nodes,it becomes a challenge to authorize data securely and efficiently while protecting user privacy.To address this challenge,proxy re-encryption(PRE)schemes provide a feasible way allowing an intermediary proxy node to re-encrypt ciphertext designated for different authorized data requesters without compromising any plaintext information.Since the proxy is viewed as a semi-trusted party,it should be taken to prevent malicious behaviors and reduce the risk of data leakage when implementing PRE schemes.This paper proposes a new fog-assisted identity-based PRE scheme supporting anonymous key generation,equality test,and user revocation to fulfill various IoT application requirements.Specifically,in a traditional identity-based public key architecture,the key escrow problem and the necessity of a secure channel are major security concerns.We utilize an anonymous key generation technique to solve these problems.The equality test functionality further enables a cloud server to inspect whether two candidate trapdoors contain an identical keyword.In particular,the proposed scheme realizes fine-grained user-level authorization while maintaining strong key confidentiality.To revoke an invalid user identity,we add a revocation list to the system flows to restrict access privileges without increasing additional computation cost.To ensure security,it is shown that our system meets the security notion of IND-PrID-CCA and OW-ID-CCA under the Decisional Bilinear Diffie-Hellman(DBDH)assumption.
基金financially supported by ARC Linkage project(LP210200642)ARC Center of Excellence for Quantum Biotechnology(grant no.CE230100021)+1 种基金National Health and Medical Research Council Investigator Fellowship—(grant no.APP2017499)Chan Zuckerberg Initiative Deep Tissue Imaging Phase 2(grant no.DT12-0000000182).
文摘Lateral flow immunoassays(LFIAs)are low-cost,rapid,and easy to use for pointof-care testing(POCT),but the majority of the available LFIA tests are indicative,rather than quantitative,and their sensitivity in antigen tests are usually limited at the nanogram range,which is primarily due to the passive capillary fluidics through nitrocellulose membranes,often associated with non-specific bindings and high background noise.To overcome this challenge,we report a Beads-on-a-Tip design by replacing nitrocellulose membranes with a pipette tip loaded with magnetic beads.The beads are pre-conjugated with capture antibodies that support a typical sandwich immunoassay.This design enriches the low-abundant antigen proteins and allows an active washing process to significantly reduce non-specific bindings.To further improve the detection sensitivity,we employed upconversion nanoparticles(UCNPs)as luminescent reporters and SARS-CoV-2 spike(S)antigen as a model analyte to benchmark the performance of this design against our previously reported methods.We found that the key to enhance the immunocomplex formation and signal-to-noise ratio lay in optimizing incubation time and the UCNP-to-bead ratio.We therefore successfully demonstrated that the new method can achieve a very large dynamic range from 500 fg/mL to 10μg/mL,across over 7 digits,and a limit of detection of 706 fg/mL,nearly another order of magnitude lower than the best reported LFIA using UCNPs in COVID-19 spike antigen detection.Our system offers a promising solution for ultra-sensitive and quantitative POCT diagnostics.
基金supported by the National Natural Science Foundation of China(No.52388102)the Sichuan Science and Technology Program(No.2024NSFTD0011)the Fundamental Research Funds for the State Key Laboratory of Rail Transit Vehicle System of Southwest Jiaotong University(No.2023TPL-T11).
文摘The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from the rack vehicle in traction conditions,a systematic test of the track subsystem was carried out on a large-slope test line.In the test,the bending stress of the rack teeth,the wheel-rail forces,and the acceleration of crucial components in the track system were measured.Subsequently,a detailed analysis was conducted on the tested signals of the rack railway track system in the time domain and the time-frequency domains.The test results indicate that the traction force significantly affects the rack tooth bending stress and the wheel-rail forces.The vibrations of the track system under the traction conditions are mainly caused by the impacts generated from the gear-rack engagement,which are then transferred to the sleepers,the rails,and the ballast beds.Furthermore,both the maximum stress on the racks and the wheel-rail forces measured on the rails remain below their allowable values.This experimental study evaluates the load characteristics and reveals the vibration characteristics of the rack railway track system under the vehicle’s ultimate load,which is very important for the load-strengthening design of the key components such as racks and the vibration and noise reduction of the track system.
基金Supported by National Natural Science Foundation of China(Grant No.52375009)Fujian Provincial Young and Middle-Aged Teacher Education Research Project of China(Grant No.JAT220029).
文摘Parallel machining robot is a new type of robotized equipment for high-efficiency machining structural com-ponents with complex geometries.Terminal rigidity is of great importance index for such type of equipment,which affects their load capacity and working accuracy.Before a parallel machining robot can be used for heavy-load and high-efficiency machining,its terminal rigidity should be evaluated systematically.The present study is to quantitatively reveal the stiffness properties of a previously invented Z4 redundantly actuated parallel ma-chining robot(RAPMR).For this purpose,two critical issues,i.e.,stiffness modelling and index construction,are clarified to carry out stiffness evaluation of the Z4 RAPMR.Firstly,drawing on the screw theory,a semi-analytic stiffness model of the proposed RAPMR is established at a component level.Secondly,a set of virtual work-based stiffness indices is constructed to evaluate the terminal rigidity of parallel robots.Those indices have a consistent physical unit in describing linear and angular terminal rigidity.With these indices,the local and the global stiffness performance of the Z4 RAPMR are predicted.Thirdly,a laboratory prototype of the proposed RAPMR is fabricated.And the experimental test is performed to verify the correctness of the established stiffness model.The present work is expected to provide fundamental information for further light-weight design and rigidity enhancement.
基金National Key R&D Program of China under Grant No.2024YFD1600404。
文摘Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluation of their seismic performance is important and cannot be ignored.To investigate the seismic performance of large-sized high performance concrete cladding(HPCC),a series of full-scale experimental tests were conducted using a unidirectional shaking table.A steel supporting frame was used to install the HPCCs and reproduce the effects of the building under earthquake.The tests were divided into two parts:in-plane(IP)testing and out-plane(OP)testing.Three recorded accelerograms,one artificial accelerogram,and one sinusoidal accelerogram were used to conduct the shaking table tests.The results show that the maximum recorded IP responses of acceleration and interstory drift ratio were 1.04 g and 1/97,while the OP responses were 1.02 g and 1/51.The HPCCs functioned well throughout the entire experimental protocol.The fundamental frequency of the HPCCs systems rarely changed after the tests.
基金support to this study from the National Natural Science Foundation of China,NSFC(Grant No.52278367)The Belt and Road Special Foundation of the National Key Laboratory ofWater Disaster Prevention(Grant No.2024nkms08).
文摘The stress-strain behavior of calcareous sand is significantly influencedby particle breakage(B)and initial relative density(Dri),but few constitutive models consider their combined effects.To bridge this gap,we conducted a series of triaxial tests on calcareous sand with varying Dri and stress paths,examining particle breakage and critical state behavior.Key findingsinclude:(1)At a constant stress ratio(η),B follows a hyperbolic relationship with mean effective stress(p'),and for a given p',B increases proportionally withη;(2)The critical state line(CSL)moves downward with increasing Dri,whereas the critical state friction angle(φcs)decreases with increasing B.Based on these findings,we propose a unifiedbreakage evolution model to quantify particle breakage in calcareous sand under various loading conditions.Integrating this model with the Normal Consolidation Line(NCL)and CSL equations,we successfully simulate the steepening of NCL and CSL slopes as B increases with the onset of particle breakage.Furthermore,we quantitatively evaluate the effect of B onφcs.Finally,within the framework of Critical State Soil Mechanics and Hypoplasticity theory,we develop a hypoplastic model incorporating B and Dri.The model is validated through strong agreement with experimental results across various initial relative densities,stress paths and drainage conditions.
基金supported by the National Key Research and Development Program of China(No.2022YFE0201800)the National Natural Science Foundation of China(Nos.22274169 and 22474161)+5 种基金Guangdong Basic and Applied Basic Research Foundation(No.2024A1515030160)the Science and Technology Program of Guangzhou City(No.2023B03J1380)Shenzhen Science and Technology Innovation Commission(No.GJHZ20210705142200001)the Scientific Technology Project of Guangzhou City(No.202103000003)the Guangdong Science and Technology Plan Project(No.2020B1212060077)the Open Research Fund of State Key Laboratory of Analytical Chemistry for Life Science,School of Chemistry and Chemical Engineering,Nanjing University.
文摘Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance for mass screening of cancer,so the cost-effective and simple detection methods of sEVpp are urgently demanded.Herein,we constructed a paper-based multichannel sEVpp POCT device(sEVpp-PAD)enabled by functional DNA probes and metal-organic framework(MOF).The core components are aptamer/MOF-modified paper chips.The modified aptamers can immunocapture the sEV expressing corresponding proteins,while the modified MOF can provide abundant sites for aptamer-modification,reduce the nonspecific protein absorption,and act as reference for ratiometric detection.Simply powered by two syringes,the sEVpp-PAD can efficiently capture sEVs expressing corresponding protein from cell culture media and sera.Furthermore,a detection probe(DP)consisted of CD63 aptamer and G-quadruplex was developed for the colorimetric detection of captured sEVs.Utilizing this device,the sEVpp in various hepatocellular carcinoma cell culture medium and,more importantly,in human sera can be accurately determined,only with$2 device,$0.2 detection reagents and 1.8 h procedure.This simple strategy for sEVpp detection can innovatively promote the POCT and subtyping of cancer based on sEV-related liquid biopsy.
基金supported by the National Natural Science Foundation of China(Nos.12341501 and 12575164)。
文摘X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.
基金supported by the Stable Support Fund forBasic Disciplines,China(No.3072024WD0201)。
文摘Underwater gas-liquid two-phase propulsion technology is an emerging propulsion method that offers high efficiency and unrestricted navigation speed.The integration of this technology into water ramjet engines can significantly enhance propulsion efficiency and holds substantial potential for broad applications.However,forming a gas-liquid two-phase flow within the nozzle requires introducing a large amount of rammed seawater.At this time,there is a complex phase transition problem of combustion products in the combustion chamber,which makes the thermodynamic calculation for gas-liquid two-phase water ramjet engines particularly challenging.This paper proposes a thermodynamic calculation method for gas-liquid two-phase water ramjet engines,based on the energy equation for gas-liquid two-phase flow and traditional thermodynamic principles,enabling thermodynamic calculations under conditions of ultra-high water-fuel ratios.Additionally,ground ignition tests of the gas-liquid two-phase engine were conducted,yielding critical engine test parameters.The results demonstrate that the gas-liquid two-phase water ramjet engine achieves a high specific impulse,with a theoretical maximum specific impulse of up to 7000(N s)/kg.The multiphase flow effects significantly impact engine performance,with specific impulse losses reaching up to 25.86%.The error between the thrust and specific impulse in the ground test and the theoretical values is within 10%,validating the proposed thermodynamic calculation method as a reliable reference for further research on gas-liquid two-phase water ramjet engines.
基金supported by Institute of Information and Communications Technology Planning and Evaluation(IITP)grant funded by the Korean government(MSIT)(No.2019-0-01842,Artificial Intelligence Graduate School Program(GIST))supported by Korea Planning&Evaluation Institute of Industrial Technology(KEIT)grant funded by the Ministry of Trade,Industry&Energy(MOTIE,Republic of Korea)(RS-2025-25448249+1 种基金Automotive Industry Technology Development(R&D)Program)supported by the Regional Innovation System&Education(RISE)programthrough the(Gwangju RISE Center),funded by the Ministry of Education(MOE)and the Gwangju Metropolitan City,Republic of Korea(2025-RISE-05-001).
文摘In real-world autonomous driving tests,unexpected events such as pedestrians or wild animals suddenly entering the driving path can occur.Conducting actual test drives under various weather conditions may also lead to dangerous situations.Furthermore,autonomous vehicles may operate abnormally in bad weather due to limitations of their sensors and GPS.Driving simulators,which replicate driving conditions nearly identical to those in the real world,can drastically reduce the time and cost required for market entry validation;consequently,they have become widely used.In this paper,we design a virtual driving test environment capable of collecting and verifying SiLS data under adverse weather conditions using multi-source images.The proposed method generates a virtual testing environment that incorporates various events,including weather,time of day,and moving objects,that cannot be easily verified in real-world autonomous driving tests.By setting up scenario-based virtual environment events,multi-source image analysis and verification using real-world DCUs(Data Concentrator Units)with V2X-Car edge cloud can effectively address risk factors that may arise in real-world situations.We tested and validated the proposed method with scenarios employing V2X communication and multi-source image analysis.
基金support from the National Key Research and Development Program of China(Grant No.2022YFE0137200)supported by the Taishan Scholars Program and Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety(Grant No.SKLGME023003).
文摘High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.
基金funded on the one hand by Agence de l'Innovation de Défense(AID)grant reference number 2021650044on the other hand by Ecole Centrale de Nantes。
文摘Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.
文摘Objective:To analyze factors affecting the utilization of human immunodeficiency virus counseling and testing(HCT)service among human immunodeficiency virus risk groups at Hessa Air Genting Health Center,Asahan Regency,North Sumatera,Indonesia.Methods:This quantitative unmatched case-control study was conducted from April 2024 to April 2025 at Hessa Air Genting Health Center,Asahan Regency,North Sumatra Province,Indonesia.Female sex workers and men who have sex with men were selected using purposive sampling based on predefined inclusion and exclusion criteria.Data were collected via questionnaires and analyzed using SPSS version 18.0,with univariate analysis,bivariate analysis(Chi-square test),and multivariate analysis(logistic regression analysis).Results:Comprehensive analysis of 75 cases and 75 controls was conducted to identify factors affecting the utilization of HCT services.Specifically,this study identified significant effects of knowledge(OR 3.2,95%CI 1.5-7.0,P=0.003),perception(OR 5.6,95%CI 2.5-12.5,P<0.001),information media(OR 3.1,95%CI 1.4-6.8,P=0.005),and health workers encouragement(OR 4.0,95%CI 1.5-10.4,P=0.005).In contrast,access to health services did not have a significant effect.Conclusions:Knowledge,perception,information media,and health worker encouragement had significant effects on HCT service utilization,with perception identified as the dominant factor.To improve utilization,strengthening positive perceptions,targeted training for healthcare workers,strengthened partnerships with local non-governmental organizations,and the use of social media for health promotion are recommended.
文摘For India to achieve elimination by 2030,the challenges posed by Plasmodium(P.)vivax cannot be overlooked owing to its burden and unique biology.In 2023,in India,about 224000 malaria cases were reported,and a significant proportion(40%)were P.vivax cases.In P.vivax infection,the persistence of dormant liver stage of parasite,i.e.,hypnozoites,leading to relapses weeks or months later poses challenge in its elimination.
文摘It is challenging to diagnose isolated hyperbilirubinemia with rare and complex etiologies under the constraints of traditional testing conditions.Herein,we present a rare case of coexisting Gilbert syndrome(GS)and erythropoietic protoporphyria(EPP),which has not been previously documented.CASE SUMMARY We present a rare case of coexisting GS and EPP in a 23-year-old Chinese male with a long history of jaundice and recently found splenomegaly.Serial nonspecific hemolysis screening tests yielded inconsistent results,and investigations for common hemolytic etiologies were negative.However,Levitt’s carbon monoxide breath test,which measures erythrocyte lifespan(the gold-standard marker of hemolysis),demonstrated significant hemolysis,revealing a markedly shortened erythrocyte lifespan of 11 days(normal average 120 days).Genetic testing subsequently confirmed EPP with a homozygous ferrochelatase gene mutation and GS with a heterozygous uridine diphosphate glucuronosyl trans-ferase 1A1 gene mutation.CONCLUSION The rapid,non-invasive Levitt’s carbon monoxide breath test resolved the diagnostic challenge posed by a rare and complex cause of hyperbilirubinemia.
