Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may ...Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may exacerbate these limitations.To address these issues,this study introduced a novel cement-stabilized permeable recycled aggregate material.A total of 162 beam specimens prepared with nine different levels of cement-aggregate ratio were tested to evaluate their permeability,bending load,and bending fatigue life.The experimental results indicate that increasing the content of recycled aggregates led to a reduction in both permeability and bending load.Additionally,the inclusion of recycled aggregates diminished the energy dissipation capacity of the specimens.These findings were used to establish a robust relationship between the initial damage in cement-stabilized permeable recycled aggregate material specimens and their fatigue life,and to propose a predictive model for their fatigue performance.Further,a method for assessing fatigue damage based on the evolution of fatigue-induced strain and energy dissipation was developed.The findings of this study provide valuable insights into the mechanical behavior and fatigue performance of cement-stabilized permeable recycled aggregate materials,offering guidance for the design of low-carbon-emission,permeable,and durable roadways incorporating recycled aggregates.展开更多
This study meticulously examined the compaction and sulfate erosion resistance of cement-stabilized materials incorporating recycled brick-concrete aggregate (RBCA).To explore the effects of recycled brick aggregate (...This study meticulously examined the compaction and sulfate erosion resistance of cement-stabilized materials incorporating recycled brick-concrete aggregate (RBCA).To explore the effects of recycled brick aggregate (RBA) with varying particle sizes,three size ranges (4.75-9.5 mm,9.5-19 mm and 19-31.5 mm) were used to replace 20% of the corresponding particle sizes of recycled concrete aggregate (RCA) in cement-stabilized materials.The findings indicated that cement-stabilized materials utilizing RBA and RCA exhibited a lower maximum dry density and a higher optimum moisture content than natural aggregate cement-stabilized materials.The use of RBA with a particle size of 4.75-9.5 mm resulted in a lower maximum dry density and a higher optimum moisture content than 9.5-19 mm and 19-31.5 mm.Furthermore,the 7-day unconfined compressive strength of RBCA cement-stabilized materials with RBA of 4.75-9.5 mm demonstrated superior results compared to those with larger particle sizes.Regarding sulfate erosion resistance,the mass loss and unconfined compressive strength loss of the RBCA cement-stabilized materials at 56 days were highest for the 19-31.5 mm particle size of the RBA.In terms of compaction and sulfate resistance,it is recommended to use 4.75-19 mm RBA in RBCA cement-stabilized materials.展开更多
Reversible data hiding(RDH)enables secret data embedding while preserving complete cover image recovery,making it crucial for applications requiring image integrity.The pixel value ordering(PVO)technique used in multi...Reversible data hiding(RDH)enables secret data embedding while preserving complete cover image recovery,making it crucial for applications requiring image integrity.The pixel value ordering(PVO)technique used in multi-stego images provides good image quality but often results in low embedding capability.To address these challenges,this paper proposes a high-capacity RDH scheme based on PVO that generates three stego images from a single cover image.The cover image is partitioned into non-overlapping blocks with pixels sorted in ascending order.Four secret bits are embedded into each block’s maximum pixel value,while three additional bits are embedded into the second-largest value when the pixel difference exceeds a predefined threshold.A similar embedding strategy is also applied to the minimum side of the block,including the second-smallest pixel value.This design enables each block to embed up to 14 bits of secret data.Experimental results demonstrate that the proposed method achieves significantly higher embedding capacity and improved visual quality compared to existing triple-stego RDH approaches,advancing the field of reversible steganography.展开更多
Conversational recommender systems(CRSs)focus on refining preferences and providing personalized recommendations through natural language interactions and dialogue history.Large language models(LLMs)have shown outstan...Conversational recommender systems(CRSs)focus on refining preferences and providing personalized recommendations through natural language interactions and dialogue history.Large language models(LLMs)have shown outstanding performance across various domains,thereby prompting researchers to investigate their applicability in recommendation systems.However,due to the lack of task-specific knowledge and an inefficient feature extraction process,LLMs still have suboptimal performance in recommendation tasks.Therefore,external knowledge sources,such as knowledge graphs(KGs)and knowledge bases(KBs),are often introduced to address the issue of data sparsity.Compared to KGs,KBs possess higher retrieval efficiency,making them more suitable for scenarios where LLMs serve as recommenders.To this end,we introduce a novel framework integrating LLMs with KBs for enhanced retrieval generation,namely LLMKB.LLMKB initially leverages structured knowledge to create mapping dictionaries,extracting entity-relation information from heterogeneous knowledge to construct KBs.Then,LLMKB achieves the embedding calibration between user information representations and documents in KBs through retrieval model fine-tuning.Finally,LLMKB employs retrievalaugmented generation to produce recommendations based on fused text inputs,followed by post-processing.Experiment results on two public CRS datasets demonstrate the effectiveness of our framework.Our code is publicly available at the link:https://anonymous.4open.science/r/LLMKB-6FD0.展开更多
Traveling wave(TW)fault location technology has been widely used in transmission systems due to its high accuracy and simplicity.Recently,there has been growing interest in applying this technology to medium voltage(M...Traveling wave(TW)fault location technology has been widely used in transmission systems due to its high accuracy and simplicity.Recently,there has been growing interest in applying this technology to medium voltage(MV)distribution lines.However,current practices in its deployment,signal measurement,and threshold setting are usually from the application experiences in transmission lines,despite significant differences in fault-induced wave characteristics between transmission and distribution systems.To address these issues,this paper investigates the feasibility and applicability of TW fault technology in MV overhead distribution lines through characteristic analysis of fault-induced TWs.The propagation characteristics of aerial mode and zero mode TWs on overhead distribution lines are studied.Furthermore,it evaluates the influence of critical distri-bution network components including distribution transformers,multi-branch configurations,and busbar structures on wave propagation characteristics.Deployment strategies for traveling wave fault location(TWFL)devices is proposed to address the unique challenges of distribution networks,while the fault location method is also improved.Field test results demonstrate the effectiveness of the proposed methodology,showing improved fault detection accuracy and system reliability in distri-bution network applications.This research provides practical implementation suggestions for TWFL technology in distribution networks.展开更多
Tau plays a crucial role in several neurodegenerative diseases,collectively referred to as tauopathies.Therefore,targeting potential pathological changes in tau could enable useful therapeutic interventions.However,ta...Tau plays a crucial role in several neurodegenerative diseases,collectively referred to as tauopathies.Therefore,targeting potential pathological changes in tau could enable useful therapeutic interventions.However,tau is not an easy target because it dynamically interacts with microtubules and other cellular components,which presents a challenge for tau-targeted drugs.New cellular models could aid the development of mechanism-based tau-targeted therapies.展开更多
Correction to:Journal of Forestry Research(2025)36:124 https://doi.org/10.1007/s11676-025-01918-8 In this article the author’s name Yasutomo Hoshika was incorrectly written as Yasutoma Hoshika.The original article ha...Correction to:Journal of Forestry Research(2025)36:124 https://doi.org/10.1007/s11676-025-01918-8 In this article the author’s name Yasutomo Hoshika was incorrectly written as Yasutoma Hoshika.The original article has been corrected.展开更多
This study investigated biomass allocation in young stands of European beech(Fagus sylvatica L.)and Norway spruce(Picea abies(L.)Karst.)across 31 forest sites in the Western Carpathians,Slovakia.A total of 541 trees a...This study investigated biomass allocation in young stands of European beech(Fagus sylvatica L.)and Norway spruce(Picea abies(L.)Karst.)across 31 forest sites in the Western Carpathians,Slovakia.A total of 541 trees aged 2–10 years,originating from natural regeneration and planting,were destructively sampled to quantify biomass in four components:foliage,branches,stems,and roots.Generalized non-linear least squares(GNLS)models with a weighing variance function outperformed log-transformed seemingly unrelated regression(SUR)models in terms of accuracy and robustness,especially for foliage and branch biomass.When using height as the predictor,SUR models tended to underestimate biomass in planted beech,leading to notable underprediction of aboveground and total biomass.Biomass allocation patterns varied significantly by species and regeneration origin.Using a non-linear system of equations and component ratio modelling,we found out that planted spruce displayed low variability and a consistent dominance of needle biomass,while naturally regenerated beech showed greater variability and a higher proportion of stem biomass,reflecting stronger competition-driven vertical growth.Interspecific differences in total biomass were more pronounced when using tree height,with spruce generally exhibiting greater biomass than beech at equivalent heights.Overall,stem base diameter marginally outperformed tree height as a predictor of biomass.However,tree height-based models showed strong performance and are particularly suitable for integration with remote sensing applications.These findings can directly support forest managers and modellers in comparing regeneration methods and biomass estimation approaches for early-stage stand development,carbon accounting,and remote sensing calibration.展开更多
Federated Learning(FL)enables joint training over distributed devices without data exchange but is highly vulnerable to attacks by adversaries in the form of model poisoning and malicious update injection.This work pr...Federated Learning(FL)enables joint training over distributed devices without data exchange but is highly vulnerable to attacks by adversaries in the form of model poisoning and malicious update injection.This work proposes Secured-FL,a blockchain-based defensive framework that combines smart contract-based authentication,clustering-driven outlier elimination,and dynamic threshold adjustment to defend against adversarial attacks.The framework was implemented on a private Ethereum network with a Proof-of-Authority consensus algorithm to ensure tamper-resistant and auditable model updates.Large-scale simulation on the Cyber Data dataset,under up to 50%malicious client settings,demonstrates Secured-FL achieves 6%-12%higher accuracy,9%-15%lower latency,and approximately 14%less computational expense compared to the PPSS benchmark framework.Additional tests,including confusion matrices,ROC and Precision-Recall curves,and ablation tests,confirm the interpretability and robustness of the defense.Tests for scalability also show consistent performance up to 500 clients,affirming appropriateness to reasonably large deployments.These results make Secured-FL a feasible,adversarially resilient FL paradigm with promising potential for application in smart cities,medicine,and other mission-critical IoT deployments.展开更多
Chalcogenide perovskites(CPs)based on zirconium(Zr)and hafnium(Hf)are becoming increasingly attractive as a new class of materials for next-generation solar cells.CPs with the ABX_(3) structure stand out due to their ...Chalcogenide perovskites(CPs)based on zirconium(Zr)and hafnium(Hf)are becoming increasingly attractive as a new class of materials for next-generation solar cells.CPs with the ABX_(3) structure stand out due to their attractive optical and electrical properties,such as efficient light absorption,direct bandgaps in the range of 1.1–2.1 eV,and remarkable defect tolerance,making them a compelling alternative to hybrid and double perovskites for solar energy conversion.Although theoretical studies have progressed rapidly,experimental verification still faces challenges such as the high synthesis temperatures required(>900℃),particularly in producing high-quality,phase-pure thin films and scalable solution-based processes.In this review,we aim to provide a comprehensive overview of the progress and remaining obstacles in advancing CP-based materials and devices.First,we describe the structure and composition as well as the different CPs in which the B site is occupied by Zr and Hf.Second,we summarize the methods used and the challenges that researchers face in producing an effective device.We highlight the main features that make CPs a preferred option for photovoltaic and other applications.Third,we look at the progress made in simulating solar cells that can achieve a power conversion efficiency(PCE)of over 30%using SCAPS-1D software.In the end,challenges and future research directions toward the development of CP materials and devices are provided.Overall,this review will serve as a valuable resource for researchers in selecting suitable strategies to achieve high-performance optoelectronic devices.展开更多
Federated learning is a decentralized model training paradigm with significant potential.However,the quality of Federated Network’s client updates can vary due to non-IID data distributions,leading to suboptimal glob...Federated learning is a decentralized model training paradigm with significant potential.However,the quality of Federated Network’s client updates can vary due to non-IID data distributions,leading to suboptimal global models.To address this issue,we propose a novel client selection strategy called FedPA(Performance-Based Federated Averaging).This proposed model selectively aggregates client updates based on a predefined performance threshold.Only clients whose local models achieve an F1 score of 70%or higher after training are included in the aggregation process.Clients below this threshold receive the updated global model but do not contribute their parameters.In this way,the low-performance clients are still in the process of learning and,after some rounds,will be able to contribute.If no client meets the performance threshold in a given round,the system falls back to standard FedAvg aggregation.This ensures the global model continues to improve even when most clients perform poorly.We evaluate FedPA on a subset of the MURA dataset for abnormality detection in radiographs of four bone types.Compared to baseline federated learning algorithms such as Federated Averaging(FedAvg),Federated Proximal(FedProx),Federated Stochastic Gradient Descent(FedSGD),and Federated Batch Normalization(FedBN),FedPA consistently ranks first or second across key performance metrics,particularly in accuracy,F1 score,and recall.Moreover,FedPA demonstrates notable efficiency,achieving the lowest average round time(≈2270 s)and minimal memory usage(≈645.58 MB),all without relying on GPU resources.These results highlight FedPA’s effectiveness in improving global model quality while reducing computational overhead,positioning it as a promising approach for real-world federated learning applications in resource-constrained environments.展开更多
The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Sur...The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."展开更多
Maize(Zea mays L.)is recognized as one of the most significant cereal crops worldwide,serving as a primary source of human food,animal feed,and industrial raw materials.With increasing diversification of market demand...Maize(Zea mays L.)is recognized as one of the most significant cereal crops worldwide,serving as a primary source of human food,animal feed,and industrial raw materials.With increasing diversification of market demands for specialty maize varieties,distinctive fresh produce cultivars characterized by unique textures have gained considerable popularity among consumers(Boyer and Shannon 1984).Notably,sweet maize is often referred to as the‘King of fruits and vegetables'due to its richness in polysaccharides,dietary fiber,trace elements,vitamins,linoleic acid,and other essential nutrients(Revilla et al.2021).展开更多
Hebei Province has incorporated targeted assistance services for people with disabilities into livelihood projects,upgrading the quality and efficiency of support services for disadvantaged groups.THE living and nursi...Hebei Province has incorporated targeted assistance services for people with disabilities into livelihood projects,upgrading the quality and efficiency of support services for disadvantaged groups.THE living and nursing allowances provided by the Chinese government for people with disabilities who are unable to work are not only important components of China’s social security system which provide for the needs of its disabled,but also show China’s ability to guarantee the basic living standard and social fairness and justice for this group of people.展开更多
Dear Editor,This letter studies the problem of stealthy attacks targeting stochastic event-based estimation,alongside proposing measures for their mitigation.A general attack framework is introduced,and the correspond...Dear Editor,This letter studies the problem of stealthy attacks targeting stochastic event-based estimation,alongside proposing measures for their mitigation.A general attack framework is introduced,and the corresponding stealthiness condition is analyzed.To enhance system security,we advocate for a single-dimensional encryption method,showing that securing a singular data element is sufficient to shield the system from the perils of stealthy attacks.展开更多
New electronic devices based on the physical properties of electrically driven skyrmions are promising for logic computing and nonvolatile memory applications.However,achieving efficient and practical compute-storage ...New electronic devices based on the physical properties of electrically driven skyrmions are promising for logic computing and nonvolatile memory applications.However,achieving efficient and practical compute-storage integration remains challenging owing to the structural complexity,limited functionality,and low flexibility observed in most skyrmion-based devices.In this study,we designed a novel device architecture that integrates seven basic logic gates into a unified physical structure.Their operation can be enabled by physical mechanisms,such as spin-orbit torque,spin-transfer torque,skyrmion-edge repulsions,and skyrmion-skyrmion interactions.Furthermore,by incorporating voltage-controlled magnetic anisotropy,the device achieved multi-input capability and reconfigurability functionality.Ultralow power consumption(<1 fJ/bit per logic function)and extremely high logic density were achieved.Significantly,the compatibility of this nanotrack design with existing skyrmion racetrack memory paves the way for advanced in-memory computing in spintronic architectures.展开更多
The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of c...The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of cement-soil,presents the factors of influencing on compressive strength,mainly analyses the factors including cement mixing ratio,cement strength grade,curing age,moisture content and soil texture and puts forward some rational proposals at last.展开更多
The base layer constructed by cement-stabilized macadam(CSM)has been widely used in highway construction due to its low elasticity deformation and high carrying capacity.As a bearing layer,the CSM base is not exempt f...The base layer constructed by cement-stabilized macadam(CSM)has been widely used in highway construction due to its low elasticity deformation and high carrying capacity.As a bearing layer,the CSM base is not exempt from fatigue cracking under cyclic loading in the service process.Cracks in the base will create irreversible structural and functional deficiencies,such as the potential for reflective cracking of subsequently placed asphalt concrete overlays.The fracture of the base will shorten the service life of the pavement.The quality of the CSM base is directly related to the bearing capacity and integrity of the whole pavement structure.It is of practical significance to further study the fatigue failure behavior of CSM material for the long-term performance of the pavement.The CSM material is a typical heterogeneous multiphase composite.On the mesoscale,CSM consists of aggregate,cement mortar,pores,and the interface transitional zone(ITZ).On the microscale,the hardened mortar contains a large number of capillary pores,unhydrated particles,hydrated crystals,etc.,which makes the spatial distribution of its material properties stochastic.In addition,cement hydration,dry shrinkage,and temperature shrinkage can also produce micro-crack defects in cement mortar.These microcracks will have crossscale evolution under load,resulting in structural fracture.Macroscopic complex deformation and mechanical response are the reflections of its microscopic and even mesoscale composition and structure.This study summarized the existing studies on the mesoscopic properties of CSM materials,respectively from the three aspects of mesostructure,structural characterization,and mesoscale fatigue damage analysis,to help the development of long-life pavement.The future research direction is to explore the mesoscale characteristics of CSM using multiscale representation and analysis methods,to establish the connection between mesoscale characteristics and macroscopic mechanical properties.展开更多
基金Project(2024JJ2073)supported by the Science Fund for Distinguished Young Scholars of Hunan Province,ChinaProjects(2023YFC3807205,2019YFC1904704)+4 种基金supported by the National Key R&D Program of ChinaProject(52178443)supported by the National Natural Science Foundation of ChinaProject(2024ZZTS0109)supported by Fundamental Research Funds for the Central Universities of Central South University,China。
文摘Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may exacerbate these limitations.To address these issues,this study introduced a novel cement-stabilized permeable recycled aggregate material.A total of 162 beam specimens prepared with nine different levels of cement-aggregate ratio were tested to evaluate their permeability,bending load,and bending fatigue life.The experimental results indicate that increasing the content of recycled aggregates led to a reduction in both permeability and bending load.Additionally,the inclusion of recycled aggregates diminished the energy dissipation capacity of the specimens.These findings were used to establish a robust relationship between the initial damage in cement-stabilized permeable recycled aggregate material specimens and their fatigue life,and to propose a predictive model for their fatigue performance.Further,a method for assessing fatigue damage based on the evolution of fatigue-induced strain and energy dissipation was developed.The findings of this study provide valuable insights into the mechanical behavior and fatigue performance of cement-stabilized permeable recycled aggregate materials,offering guidance for the design of low-carbon-emission,permeable,and durable roadways incorporating recycled aggregates.
基金Funded by the National Natural Science Foundation of China (No.52078068)the Natural Science Foundation of Jiangsu Province (No.BK20220626)。
文摘This study meticulously examined the compaction and sulfate erosion resistance of cement-stabilized materials incorporating recycled brick-concrete aggregate (RBCA).To explore the effects of recycled brick aggregate (RBA) with varying particle sizes,three size ranges (4.75-9.5 mm,9.5-19 mm and 19-31.5 mm) were used to replace 20% of the corresponding particle sizes of recycled concrete aggregate (RCA) in cement-stabilized materials.The findings indicated that cement-stabilized materials utilizing RBA and RCA exhibited a lower maximum dry density and a higher optimum moisture content than natural aggregate cement-stabilized materials.The use of RBA with a particle size of 4.75-9.5 mm resulted in a lower maximum dry density and a higher optimum moisture content than 9.5-19 mm and 19-31.5 mm.Furthermore,the 7-day unconfined compressive strength of RBCA cement-stabilized materials with RBA of 4.75-9.5 mm demonstrated superior results compared to those with larger particle sizes.Regarding sulfate erosion resistance,the mass loss and unconfined compressive strength loss of the RBCA cement-stabilized materials at 56 days were highest for the 19-31.5 mm particle size of the RBA.In terms of compaction and sulfate resistance,it is recommended to use 4.75-19 mm RBA in RBCA cement-stabilized materials.
基金funded by University of Transport and Communications(UTC)under grant number T2025-CN-004.
文摘Reversible data hiding(RDH)enables secret data embedding while preserving complete cover image recovery,making it crucial for applications requiring image integrity.The pixel value ordering(PVO)technique used in multi-stego images provides good image quality but often results in low embedding capability.To address these challenges,this paper proposes a high-capacity RDH scheme based on PVO that generates three stego images from a single cover image.The cover image is partitioned into non-overlapping blocks with pixels sorted in ascending order.Four secret bits are embedded into each block’s maximum pixel value,while three additional bits are embedded into the second-largest value when the pixel difference exceeds a predefined threshold.A similar embedding strategy is also applied to the minimum side of the block,including the second-smallest pixel value.This design enables each block to embed up to 14 bits of secret data.Experimental results demonstrate that the proposed method achieves significantly higher embedding capacity and improved visual quality compared to existing triple-stego RDH approaches,advancing the field of reversible steganography.
文摘Conversational recommender systems(CRSs)focus on refining preferences and providing personalized recommendations through natural language interactions and dialogue history.Large language models(LLMs)have shown outstanding performance across various domains,thereby prompting researchers to investigate their applicability in recommendation systems.However,due to the lack of task-specific knowledge and an inefficient feature extraction process,LLMs still have suboptimal performance in recommendation tasks.Therefore,external knowledge sources,such as knowledge graphs(KGs)and knowledge bases(KBs),are often introduced to address the issue of data sparsity.Compared to KGs,KBs possess higher retrieval efficiency,making them more suitable for scenarios where LLMs serve as recommenders.To this end,we introduce a novel framework integrating LLMs with KBs for enhanced retrieval generation,namely LLMKB.LLMKB initially leverages structured knowledge to create mapping dictionaries,extracting entity-relation information from heterogeneous knowledge to construct KBs.Then,LLMKB achieves the embedding calibration between user information representations and documents in KBs through retrieval model fine-tuning.Finally,LLMKB employs retrievalaugmented generation to produce recommendations based on fused text inputs,followed by post-processing.Experiment results on two public CRS datasets demonstrate the effectiveness of our framework.Our code is publicly available at the link:https://anonymous.4open.science/r/LLMKB-6FD0.
基金supported by the National Natural Sci-ence Foundation of China(No.52107109).
文摘Traveling wave(TW)fault location technology has been widely used in transmission systems due to its high accuracy and simplicity.Recently,there has been growing interest in applying this technology to medium voltage(MV)distribution lines.However,current practices in its deployment,signal measurement,and threshold setting are usually from the application experiences in transmission lines,despite significant differences in fault-induced wave characteristics between transmission and distribution systems.To address these issues,this paper investigates the feasibility and applicability of TW fault technology in MV overhead distribution lines through characteristic analysis of fault-induced TWs.The propagation characteristics of aerial mode and zero mode TWs on overhead distribution lines are studied.Furthermore,it evaluates the influence of critical distri-bution network components including distribution transformers,multi-branch configurations,and busbar structures on wave propagation characteristics.Deployment strategies for traveling wave fault location(TWFL)devices is proposed to address the unique challenges of distribution networks,while the fault location method is also improved.Field test results demonstrate the effectiveness of the proposed methodology,showing improved fault detection accuracy and system reliability in distri-bution network applications.This research provides practical implementation suggestions for TWFL technology in distribution networks.
文摘Tau plays a crucial role in several neurodegenerative diseases,collectively referred to as tauopathies.Therefore,targeting potential pathological changes in tau could enable useful therapeutic interventions.However,tau is not an easy target because it dynamically interacts with microtubules and other cellular components,which presents a challenge for tau-targeted drugs.New cellular models could aid the development of mechanism-based tau-targeted therapies.
文摘Correction to:Journal of Forestry Research(2025)36:124 https://doi.org/10.1007/s11676-025-01918-8 In this article the author’s name Yasutomo Hoshika was incorrectly written as Yasutoma Hoshika.The original article has been corrected.
基金funded by the grant“EVA4.0”,No.Z.02.1.01/0.0/0.0/16_019/0000803 supported by OP RDE as well as by the projects APVV-19-0387,APVV-22-0056,and APVV-23-0293 from the Slovak Research and Development Agencyco-funded by the European Commission under the Horizon Europe Teaming for Excellence action+1 种基金project Ligno Silvagrant agreement No.101059552。
文摘This study investigated biomass allocation in young stands of European beech(Fagus sylvatica L.)and Norway spruce(Picea abies(L.)Karst.)across 31 forest sites in the Western Carpathians,Slovakia.A total of 541 trees aged 2–10 years,originating from natural regeneration and planting,were destructively sampled to quantify biomass in four components:foliage,branches,stems,and roots.Generalized non-linear least squares(GNLS)models with a weighing variance function outperformed log-transformed seemingly unrelated regression(SUR)models in terms of accuracy and robustness,especially for foliage and branch biomass.When using height as the predictor,SUR models tended to underestimate biomass in planted beech,leading to notable underprediction of aboveground and total biomass.Biomass allocation patterns varied significantly by species and regeneration origin.Using a non-linear system of equations and component ratio modelling,we found out that planted spruce displayed low variability and a consistent dominance of needle biomass,while naturally regenerated beech showed greater variability and a higher proportion of stem biomass,reflecting stronger competition-driven vertical growth.Interspecific differences in total biomass were more pronounced when using tree height,with spruce generally exhibiting greater biomass than beech at equivalent heights.Overall,stem base diameter marginally outperformed tree height as a predictor of biomass.However,tree height-based models showed strong performance and are particularly suitable for integration with remote sensing applications.These findings can directly support forest managers and modellers in comparing regeneration methods and biomass estimation approaches for early-stage stand development,carbon accounting,and remote sensing calibration.
文摘Federated Learning(FL)enables joint training over distributed devices without data exchange but is highly vulnerable to attacks by adversaries in the form of model poisoning and malicious update injection.This work proposes Secured-FL,a blockchain-based defensive framework that combines smart contract-based authentication,clustering-driven outlier elimination,and dynamic threshold adjustment to defend against adversarial attacks.The framework was implemented on a private Ethereum network with a Proof-of-Authority consensus algorithm to ensure tamper-resistant and auditable model updates.Large-scale simulation on the Cyber Data dataset,under up to 50%malicious client settings,demonstrates Secured-FL achieves 6%-12%higher accuracy,9%-15%lower latency,and approximately 14%less computational expense compared to the PPSS benchmark framework.Additional tests,including confusion matrices,ROC and Precision-Recall curves,and ablation tests,confirm the interpretability and robustness of the defense.Tests for scalability also show consistent performance up to 500 clients,affirming appropriateness to reasonably large deployments.These results make Secured-FL a feasible,adversarially resilient FL paradigm with promising potential for application in smart cities,medicine,and other mission-critical IoT deployments.
基金the“Initiative on Energy Research”,founded by the University Mohammed VI Polytechnic,for the financial support through the project“Toward efficient,stable,environmentally friendly,and scalable Perovskite Solar Cells”the financial support from DAAD and BMZ through the WE-AFRICA project+1 种基金the U.S.Department of Energy,Office of Science,Basic Energy Sciences,Early Career Program,under Award No.DOE DESC0025350the National Academies of Sciences,Engineering,and Medicine for their support through the U.S.-Africa Frontiers Fellowship。
文摘Chalcogenide perovskites(CPs)based on zirconium(Zr)and hafnium(Hf)are becoming increasingly attractive as a new class of materials for next-generation solar cells.CPs with the ABX_(3) structure stand out due to their attractive optical and electrical properties,such as efficient light absorption,direct bandgaps in the range of 1.1–2.1 eV,and remarkable defect tolerance,making them a compelling alternative to hybrid and double perovskites for solar energy conversion.Although theoretical studies have progressed rapidly,experimental verification still faces challenges such as the high synthesis temperatures required(>900℃),particularly in producing high-quality,phase-pure thin films and scalable solution-based processes.In this review,we aim to provide a comprehensive overview of the progress and remaining obstacles in advancing CP-based materials and devices.First,we describe the structure and composition as well as the different CPs in which the B site is occupied by Zr and Hf.Second,we summarize the methods used and the challenges that researchers face in producing an effective device.We highlight the main features that make CPs a preferred option for photovoltaic and other applications.Third,we look at the progress made in simulating solar cells that can achieve a power conversion efficiency(PCE)of over 30%using SCAPS-1D software.In the end,challenges and future research directions toward the development of CP materials and devices are provided.Overall,this review will serve as a valuable resource for researchers in selecting suitable strategies to achieve high-performance optoelectronic devices.
文摘Federated learning is a decentralized model training paradigm with significant potential.However,the quality of Federated Network’s client updates can vary due to non-IID data distributions,leading to suboptimal global models.To address this issue,we propose a novel client selection strategy called FedPA(Performance-Based Federated Averaging).This proposed model selectively aggregates client updates based on a predefined performance threshold.Only clients whose local models achieve an F1 score of 70%or higher after training are included in the aggregation process.Clients below this threshold receive the updated global model but do not contribute their parameters.In this way,the low-performance clients are still in the process of learning and,after some rounds,will be able to contribute.If no client meets the performance threshold in a given round,the system falls back to standard FedAvg aggregation.This ensures the global model continues to improve even when most clients perform poorly.We evaluate FedPA on a subset of the MURA dataset for abnormality detection in radiographs of four bone types.Compared to baseline federated learning algorithms such as Federated Averaging(FedAvg),Federated Proximal(FedProx),Federated Stochastic Gradient Descent(FedSGD),and Federated Batch Normalization(FedBN),FedPA consistently ranks first or second across key performance metrics,particularly in accuracy,F1 score,and recall.Moreover,FedPA demonstrates notable efficiency,achieving the lowest average round time(≈2270 s)and minimal memory usage(≈645.58 MB),all without relying on GPU resources.These results highlight FedPA’s effectiveness in improving global model quality while reducing computational overhead,positioning it as a promising approach for real-world federated learning applications in resource-constrained environments.
文摘The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."
基金supported by the Youth Research Foundation of Beijing Academy of Agriculture and Forestry Sciences,China(QNJJ202420)the Beijing Science and Technology Association Youth Lifting Project,Chinathe Beijing Municipal Rural Revitalization Agricultural Science and Technology Development Project,China(NY2401020224)。
文摘Maize(Zea mays L.)is recognized as one of the most significant cereal crops worldwide,serving as a primary source of human food,animal feed,and industrial raw materials.With increasing diversification of market demands for specialty maize varieties,distinctive fresh produce cultivars characterized by unique textures have gained considerable popularity among consumers(Boyer and Shannon 1984).Notably,sweet maize is often referred to as the‘King of fruits and vegetables'due to its richness in polysaccharides,dietary fiber,trace elements,vitamins,linoleic acid,and other essential nutrients(Revilla et al.2021).
文摘Hebei Province has incorporated targeted assistance services for people with disabilities into livelihood projects,upgrading the quality and efficiency of support services for disadvantaged groups.THE living and nursing allowances provided by the Chinese government for people with disabilities who are unable to work are not only important components of China’s social security system which provide for the needs of its disabled,but also show China’s ability to guarantee the basic living standard and social fairness and justice for this group of people.
基金supported by the National Natural Science Foundation of China(62303353,62273030,62573320)。
文摘Dear Editor,This letter studies the problem of stealthy attacks targeting stochastic event-based estimation,alongside proposing measures for their mitigation.A general attack framework is introduced,and the corresponding stealthiness condition is analyzed.To enhance system security,we advocate for a single-dimensional encryption method,showing that securing a singular data element is sufficient to shield the system from the perils of stealthy attacks.
基金support from the National Natural Science Foundation of China (Grant No.12474101)support from the National Natural Science Foundation of China (Grant Nos.52272202 and W2421027)support from the National Natural Science Foundation of China (Grant No.52501307)。
文摘New electronic devices based on the physical properties of electrically driven skyrmions are promising for logic computing and nonvolatile memory applications.However,achieving efficient and practical compute-storage integration remains challenging owing to the structural complexity,limited functionality,and low flexibility observed in most skyrmion-based devices.In this study,we designed a novel device architecture that integrates seven basic logic gates into a unified physical structure.Their operation can be enabled by physical mechanisms,such as spin-orbit torque,spin-transfer torque,skyrmion-edge repulsions,and skyrmion-skyrmion interactions.Furthermore,by incorporating voltage-controlled magnetic anisotropy,the device achieved multi-input capability and reconfigurability functionality.Ultralow power consumption(<1 fJ/bit per logic function)and extremely high logic density were achieved.Significantly,the compatibility of this nanotrack design with existing skyrmion racetrack memory paves the way for advanced in-memory computing in spintronic architectures.
文摘The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of cement-soil,presents the factors of influencing on compressive strength,mainly analyses the factors including cement mixing ratio,cement strength grade,curing age,moisture content and soil texture and puts forward some rational proposals at last.
基金sponsored by the projects found by the National Natural Science Foundation of China(NSFC)under Grant No.51978163 and Grant No.52208439the Natural Science Foundation of Jiangsu Province under Grant No.BK20200468+4 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province under Grant No.SJCX22_0063the Jiangsu Transportation Science and Technology and Achievement Transformation Project under Grant No.2020Y19-1(1)Key S&T Project of Ministry of Transport of the People's Republic of China(2021-ZD1-004)the Scientific Research Program Project of Shanghai Municipal Transportation Commission(JT2021-KY-016)which the authors are very grateful.
文摘The base layer constructed by cement-stabilized macadam(CSM)has been widely used in highway construction due to its low elasticity deformation and high carrying capacity.As a bearing layer,the CSM base is not exempt from fatigue cracking under cyclic loading in the service process.Cracks in the base will create irreversible structural and functional deficiencies,such as the potential for reflective cracking of subsequently placed asphalt concrete overlays.The fracture of the base will shorten the service life of the pavement.The quality of the CSM base is directly related to the bearing capacity and integrity of the whole pavement structure.It is of practical significance to further study the fatigue failure behavior of CSM material for the long-term performance of the pavement.The CSM material is a typical heterogeneous multiphase composite.On the mesoscale,CSM consists of aggregate,cement mortar,pores,and the interface transitional zone(ITZ).On the microscale,the hardened mortar contains a large number of capillary pores,unhydrated particles,hydrated crystals,etc.,which makes the spatial distribution of its material properties stochastic.In addition,cement hydration,dry shrinkage,and temperature shrinkage can also produce micro-crack defects in cement mortar.These microcracks will have crossscale evolution under load,resulting in structural fracture.Macroscopic complex deformation and mechanical response are the reflections of its microscopic and even mesoscale composition and structure.This study summarized the existing studies on the mesoscopic properties of CSM materials,respectively from the three aspects of mesostructure,structural characterization,and mesoscale fatigue damage analysis,to help the development of long-life pavement.The future research direction is to explore the mesoscale characteristics of CSM using multiscale representation and analysis methods,to establish the connection between mesoscale characteristics and macroscopic mechanical properties.
