Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of pro...Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of products is profoundly influenced by the catalyst structure.In this study,Fe_(2)O_(3)-doped NiSO_(4)/Al_(2)O_(3) catalysts have been meticulously developed to facilitate the selective trimerization of propylene under mild conditions.Significantly,the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst demonstrates an enhanced reaction rate(48.5 mmol_(C3)/(g_(cat).·h)),alongside a high yield of C9(~32.2%),significantly surpassing the performance of the NiSO_(4)/Al_(2)O_(3) catalyst(C9:~24.1%).The incorporation of Fe_(2)O_(3) modifies the migration process of sulfate ions,altering the Lewis acidity of the electron-deficient Ni and Fe sites on the catalyst and resulting a shift in product distribution from a Schulz-Flory distribution to a Poisson distribution.This shift is primarily ascribed to the heightened energy barrier for theβ-H elimination reaction in the C6 alkyl intermediates on the doped catalyst,further promoting polymerization to yield a greater quantity of Type II C9.Furthermore,the validation of the Cossee-Arlman mechanism within the reaction pathway has been confirmed.It is noteworthy that the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst exhibits remarkable stability exceeding 80 h in the selective trimerization of propylene.These research findings significantly enhance our understanding of the mechanisms underlying olefin oligomerization reactions and provide invaluable insights for the development of more effective catalysts.展开更多
With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are hig...With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu^(2+) ions were incorporated Wnto CsCu_(2)I_(3) microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu^(2+)and 582 nm yellow emission from self-trapped exciton e mission of CsCu_(2)I_(3).The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu^(2+)-doped CsCu_(2)I_(3) shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K^(-1)(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu^(2+)-doped GsCu_(2)I_(3) could be a good candidate for highly sensitive optical thermometer.展开更多
The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(...The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.展开更多
Sb-doped SnO2(ATO)-(CeO2-TiO2) thin Films were deposited on glass substrates using the mixed solution including CeO2-TiO2 precursor and ATO particles by sol-gel dip coating process.ATO particles were prepared using lo...Sb-doped SnO2(ATO)-(CeO2-TiO2) thin Films were deposited on glass substrates using the mixed solution including CeO2-TiO2 precursor and ATO particles by sol-gel dip coating process.ATO particles were prepared using low-temperature hydrothermal process.The mixed molar ratio of ATO to(CeO2-TiO2) vs the properties of CeO2-TiO2 thin film was investigated.The optical properties of the films were characterized by UV-visible transmission and infrared reflection spectra,the sheet resistance of ATO particles and films were measured by rubber sheeter(MYI-50) and four-point probe(HisuperGroup Inc,SDY-5),the surface morphology and structure of the films were analyzed using 3D Digitale Mikroskop and X-ray diffraction(XRD),respectively.The results showed that the ATO precursor solution lost weight completely at about 500 oC,and the ATO particles was obtained,which indicated the same rutile lattice structure as SnO2.The glass substrates coated with ATO-(CeO2-TiO2) thin films showed better properties in antistatic electricity(104-106 Ω/),shielding UV(almost 100%),visible light transmission(70%) and infrared reflection(】30%).展开更多
Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscalin...Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.展开更多
In the present study,we synthesized CeO2 catalysts doped with various transition metals(M=Co,Fe,or Cu)using a supercritical water hydrothermal route,which led to the incorporation of the metal ions in the CeO2 lattice...In the present study,we synthesized CeO2 catalysts doped with various transition metals(M=Co,Fe,or Cu)using a supercritical water hydrothermal route,which led to the incorporation of the metal ions in the CeO2 lattice,forming solid solutions.The catalysts were then used for the selective catalytic reduction(SCR)of NO by CO.The Cu‐doped catalyst exhibited the highest SCR activity;it had a T50(i.e.,50%NO conversion)of only 83°C and a T90(i.e.,90%NO conversion)of 126°C.Such an activity was also higher than in many state‐of‐the‐art catalysts.In situ diffuse reflectance Fourier transform infrared spectroscopy suggested that the MOx‐CeO2 catalysts(M=Co and Fe)mainly followed an Eley‐Rideal reaction mechanism for CO‐SCR.In contrast,a Langmuir‐Hinshelwood SCR reaction mechanism occurred in CuO‐CeO2 owing to the presence of Cu+species,which ensured effective adsorption of CO.This explains why CuO‐CeO2 exhibited the highest activity with regard to the SCR of NO by CO.展开更多
Mesoporous CeO2 was first synthesized by hydrothermal method,and then used to synthesize different contents of CuO)x/CeO2(x:molar ratio of Cu to Ce) by deposition-precipitation method.These materials were characterize...Mesoporous CeO2 was first synthesized by hydrothermal method,and then used to synthesize different contents of CuO)x/CeO2(x:molar ratio of Cu to Ce) by deposition-precipitation method.These materials were characterized by X-ray diffraction(XRD),N2 adsorption and desorption,H2 temperature programmed reduction(H2-TPR) and O2 temperature programmed desorption(O2-TPD) to study the crystal structure,surface area,and the mechanism of CO oxidation.The results show that,on XRD patterns,no evidence of CuO diffraction peaks is present until Cu loading is increased to 20%.The BET surface area decreases noticeably with the increase of Cu content.Compared with other samples,the better reducibility and activity oxygen species of(CuO)10%/CeO2coincide with its better catalytic activity.展开更多
The morphology effect of Zr-doped CeOwas studied in terms of their activities in the selective oxidation of styrene to styrene oxide using tert-butyl hydroperoxide as the oxidant. In the present work, Zrdoped CeOnanor...The morphology effect of Zr-doped CeOwas studied in terms of their activities in the selective oxidation of styrene to styrene oxide using tert-butyl hydroperoxide as the oxidant. In the present work, Zrdoped CeOnanorods exhibited the highest catalytic performance（yield of styrene oxide and TOF value）followed by nanoparticles and nanocubes. For the Zr-doped CeOnanorods, the apparent activation energy is 56.3 k J/mol, which is much lower than the values of catalysts supported on nanoparticles and nanocubes（73.3 and 93.4 k J/mol）. The high resolution transmission electron microscopy results indicated that（100） and（110） crystal planes are predominantly exposed for Zr-doped CeOnanorods while（100）and（111） for nanocubes,（111） for nanoparticles. The remarkably increased catalytic activity of the Zrdoped CeOnanorods is mainly attributed to the higher percentage of Cespecies and more oxygen vacancies, which are associated with their exposed（100） and（110） crystal planes. Furthermore, recycling studies proved that the heterogeneous Zr-doped CeOnanorods did not lose its initial high catalytic activity after five successive recycles.展开更多
The Sr2 CeO4:Ln3+(Ln=Eu,Dy)fine phosphor particles were prepared by a facile wet chemical approach,in which the consecutive hydrothermal-combustion reaction was performed.The doping of Ln3+into Sr2 CeO4 has little inf...The Sr2 CeO4:Ln3+(Ln=Eu,Dy)fine phosphor particles were prepared by a facile wet chemical approach,in which the consecutive hydrothermal-combustion reaction was performed.The doping of Ln3+into Sr2 CeO4 has little influence on the structure of host,and the as-prepared samples display wellcrystallized spherical or elliptical shape with an average particle size at about 100-200 nm.For Eu3+ions-doped Sr2 CeO4,with the increase of Eu3+-doping concentration,the blue light emission band with the maximum at 468 nm originating from a Ce4+→O2-charge transfer of the host decreases obviously and the characteristic red light emission of Eu3+(5 D0→7 F2 transition at 618 nm)is enhanced gradually.Simultaneously,the fluorescent lifetime of the broadband emission of Sr2 CeO4 decreases with the doping of Eu3+,indicating an efficient energy transfer from the host to the doping Eu3+ions.The ene rgy transfer efficiency from the host to Eu3+was investigated in detail,and the emitting color of Sr2 CeO4:Eu3+can be easily tuned from blue to red by varying the doping concentration of Eu3+ions.Moreover,the luminescence of Dy3+-doped Sr2 CeO4 was also studied.Similar energy transfer pheno menon can be observed,and the incorporation of Dy3+into Sr2 CeO4 host leads to the characteristic emission of 4 F9/2→6 H15/2(488 nm,blue light)and 4 F9/2→6 H13/2(574 nm,yellow light)of Dy3+.The Sr2 CeO4:Ln3+fine particles with tunable luminescence are quite beneficial for its potential applications in the optoelectronic fields.展开更多
A novel V-doped CeO_(2)-supported alkali-activated-steel-slag-based catalyst(V-CeO_(2)/AC)for photocatalytic decomposition of water to hydrogen was prepared via co-impregnation method.The chemical composition,mineral ...A novel V-doped CeO_(2)-supported alkali-activated-steel-slag-based catalyst(V-CeO_(2)/AC)for photocatalytic decomposition of water to hydrogen was prepared via co-impregnation method.The chemical composition,mineral phase,morphology,and optical performances of the synthesized catalyst samples were characterized by XRF,XRD,SEM,UV-Vis DRS,and so on.XRD and SEM results show that calcium silicate hydrate(Ca1.5SiO3.5·xH2O)mineral phase is formed in the carrier sample,and the prepared catalyst specimens are made up of approximately 50 nm particles.After 6 hours of xenon lamp irradiation,the catalyst supported on V-doped 8wt%CeO_(2) exhibits the highest photocatalytic hydrogen production activity(8292μmol/g),which is attributed to the interaction between the V-doped CeO_(2) active components and FeO existed in catalyst carrier.A possible photocatalytic decomposition of water for hydrogen production mechanism over the V-8CeO_(2)/AC catalyst was proposed.展开更多
The electrical properties of TiO2-based varistor ceramics with different amount of CeO2 were investigated by measuring the properties of V-I, permittivity, density and boundary defect barriers. It is found that an opt...The electrical properties of TiO2-based varistor ceramics with different amount of CeO2 were investigated by measuring the properties of V-I, permittivity, density and boundary defect barriers. It is found that an optimal composition doped with 0.7% CeO2 exhibits the highest nonlinear coefficient of 10.5, the highest breakdown voltage of 12.77 V·mm^-1, the ultrahigh permittivity of 82900（measured at 1 kHz）, and the highest density of 4.15 g·cm^-3, which is consistent with the highest and narrowest grain-boundary defect barriers. In order to illustrate the grain boundary barriers formation in TiO2-Nb2O5-MnCO3-CeO2 varistor, an grain-boundary defect barrier model was also introduced.展开更多
The N and C doping effects on the crystal structures, electronic and optical properties of fluorite structure CeO2 have been investigated using the first-principles calculation. Co-doping these two elements results in...The N and C doping effects on the crystal structures, electronic and optical properties of fluorite structure CeO2 have been investigated using the first-principles calculation. Co-doping these two elements results in the local lattice distortion and volume expansion of CeO2. Compared with the energy hand structure of pure CeO2, some local energy levels appear in the forbidden band, which may facilitate the light absorption. Moreover, the enhanced photo-catalytic properties of CeO2 were explained through the absorption spectra and the selection rule of the band-to-band transitions.展开更多
Cu^2＋-doped nanostructured TiO2-coated SiO2 （TiO2/SiO2） particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized by the sol-gel ...Cu^2＋-doped nanostructured TiO2-coated SiO2 （TiO2/SiO2） particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized by the sol-gel method using TiOSO4 as a precursor. The experimental results showed that TiO2 nanopowders on the surface of SiO2 particles were well distributed and compact. The amount of TiO2 increased with the increase in coating layers. The shell structure appeared to be composed of anatase titania nanocrystals at 550℃. The 2-layer coated TiO2 particles on the surface showed a higher degradation rate compared with all the different-layer samples. The photocatalytic activity of Cu^2＋-doped TiO2/SiO2 was higher than that ofundoped TiO2/SiO2. The optimum dopant content was about 0.10wt%.展开更多
In this work,Eu^(3+)-doped CsPbCl_(2)Br_(1) in borosilicate glass was successfully synthesized by the melt quenching annealing technique and crystallization method.This work reports a novel Eu^(3+)-doped CsPbCl_(2)Br_...In this work,Eu^(3+)-doped CsPbCl_(2)Br_(1) in borosilicate glass was successfully synthesized by the melt quenching annealing technique and crystallization method.This work reports a novel Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite quantum dots(QDs)glass with high sensitivity for optical temperature sensing.The relation of fluorescence intensity ratio(FIR)with the temperature was studied in the temperature range of 80-440 K.Notably,the maximum absolute temperature sensitivity(Sa)and relative temperature sensitivity(Sr)of Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite QDs glass can reach as high as 0.0315 K-1 and3.097%/K,respectively.Meanwhile,Eu^(3+)-doped CsPbCl_(2)Br_(1) QDs glass demonstrates good water resistance,excellent thermal and cold cycling stability performance,The Eu^(3+)-doped QDs glass materials can bring inspiration to the future exploration of rare earth ion-doped QDs glass material on the application of optical temperature sensing in the future.展开更多
The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of ...The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of thin films were inspected at different sintering temperatures by constructing a humidity-impedance measuring system. It was found that the addition of rare earth ion La^3＋ and alkali ion K^＋ was beneficial for improving the humidity sensitive properties of the samples and La0.003K0.5Ti0.9Sn0.1O2 sintered at 500 ℃ for 4 h showed the best humidity sensing properties. The impedance of this thin film decreased from 109 to 104 Ω with excellent linearity in the humidity range of 11%-95%. Narrow hysteresis loop, prominent stability and high sensitivity were obtained. The effects of dopant con-tent and doping mechanism on humidity sensitivity were also discussed in terms of segregation of rare earth ions at grain boundaries and granularity of crystalline and influence of K^＋ on the decrease in the intrinsic resistance of the materials, and increase in the number of wa-ter adsorption sites.展开更多
Lead-free piezoelectric ceramics 0.92（Bi0.5Na0.5）TiO3-0.08BaTiO3 ＋ xmol% Co3＋ （BNBT-Co, x = 0-8） are prepared by the solid state reaction method. Effects of the amount of Co^3＋ on the electrical properties and ...Lead-free piezoelectric ceramics 0.92（Bi0.5Na0.5）TiO3-0.08BaTiO3 ＋ xmol% Co3＋ （BNBT-Co, x = 0-8） are prepared by the solid state reaction method. Effects of the amount of Co^3＋ on the electrical properties and phase transition are studied. The results indicate that the addition of Co^3＋ enhances the mechanical quality factor Q^3＋ significantly, whereas the dissipation factor tanδ has a minimum value at x = 3.5. Meanwhile, addition of Co^3＋ leads to small decreases of piezoelectric constant d33, and planar electromechanical coupling kp. The present 0.92（Bio.aNao.5） TiO3-0.08BaTiO3＋3.5 moi% Co^3＋ ceramics exhibit good performance with mechanical quality factor Qm = 910, piezoelectric constant d33 = 106pC/N, planar electromechanical coupling kp =10% and dissipation factor tanδ = 1.1% at 1 kHz. Saturated polarization hysteresis loops have been obtained for BNBT-Co ceramics. Two dielectric peaks at depolarization temperature Td and Tm appear in the curves of ε33^T vs temperature for the pure BNBT ceramics. However, the first dielectric peak Td disappears after the addition of Co^3＋, which means that the transition from ferroelectric to antiferroelectric phase has been eliminated.展开更多
In order to achieve a modulator with broad bandwidth and perfect impedance match,a novel electro-optical modulator based on GeO2-doped silica waveguides on silicon substrate is designed.The finite element model of the...In order to achieve a modulator with broad bandwidth and perfect impedance match,a novel electro-optical modulator based on GeO2-doped silica waveguides on silicon substrate is designed.The finite element model of the whole electro-optical modulator is established by means of ANSYS.With the finite element method analysis,the performance of the novel modulator is predicted.The simulation reveals that the designed modulator operates with a product of 3 dB optical bandwidth and modulating length of 226.59 GHz·cm,and a characteristic impedance of 51.6 Ω at 1 550 nm wavelength.Moreover,the calculated electrical reflected power of coplanar waveguide electrode is below-20 dB in the frequency ranging from 45 MHz to 65 GHz.Therefore,the designed modulator has wide modulation bandwidth and perfect impedance match.展开更多
A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence...A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3＋. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3＋-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.展开更多
Sr1-xLa2x/3Bi2Nb20O （0 ≤ x ≤0.2） ceramic samples are prepared by the solid-state reaction method. Their structure, dielectric and ferroelectric properties are investigated. The incorporation of La^3＋ improves the...Sr1-xLa2x/3Bi2Nb20O （0 ≤ x ≤0.2） ceramic samples are prepared by the solid-state reaction method. Their structure, dielectric and ferroelectric properties are investigated. The incorporation of La^3＋ improves the den- sification and decreases the grain size of the ceramics without changing the crystal structure. The remanent polarization 2PT increases with increasing La content and reaches a maximum value of 22.8μC/cm^2 at x = 0.125, which is approximately 60% larger than that of pure SrBi2Nb2O9. The Curie temperature keeps almost unchanged at a value of about 440℃. The relationship between doping and the ferroeleetrie and dielectric properties are discussed.展开更多
We report the structural and photoluminescence(PL) properties of Nd^(3+)-doped Y_(2)O_(3)-SiO_(2) powders(Y_(2)O_(3)-SiO_(2):Nd^(3+)) as functions of annealing temperature and Nd^(3+) ion doping concentration.Y_(2)O_(...We report the structural and photoluminescence(PL) properties of Nd^(3+)-doped Y_(2)O_(3)-SiO_(2) powders(Y_(2)O_(3)-SiO_(2):Nd^(3+)) as functions of annealing temperature and Nd^(3+) ion doping concentration.Y_(2)O_(3)-SiO_(2):Nd^(3+)powders were prepared using the high-energy ball-milling(HEBM) method,and their structural and PL properties were investigated using X-ray diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,and PL spectroscopy.The XRD results reveal a cubic phase without impurities,and the peak broadening decreases with an increase in annealing temperature due to the increase in the crystallite size.The PL emission intensity increases with an increase in annealing temperature.The highest PL emission intensity is observed for the 300-min milled mixture annealed at 1000℃ for 1 h with a Nd^(3+) concentration of 1 mol%.The PL peaks excited by 800 nm radiation were detected,centered at 1080 nm(^(4)F_(3/2)→^(4)I_(11/2)) and 1350 nm(^(4)F_(3/2)→^(4)I_(13/2)).展开更多
文摘Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of products is profoundly influenced by the catalyst structure.In this study,Fe_(2)O_(3)-doped NiSO_(4)/Al_(2)O_(3) catalysts have been meticulously developed to facilitate the selective trimerization of propylene under mild conditions.Significantly,the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst demonstrates an enhanced reaction rate(48.5 mmol_(C3)/(g_(cat).·h)),alongside a high yield of C9(~32.2%),significantly surpassing the performance of the NiSO_(4)/Al_(2)O_(3) catalyst(C9:~24.1%).The incorporation of Fe_(2)O_(3) modifies the migration process of sulfate ions,altering the Lewis acidity of the electron-deficient Ni and Fe sites on the catalyst and resulting a shift in product distribution from a Schulz-Flory distribution to a Poisson distribution.This shift is primarily ascribed to the heightened energy barrier for theβ-H elimination reaction in the C6 alkyl intermediates on the doped catalyst,further promoting polymerization to yield a greater quantity of Type II C9.Furthermore,the validation of the Cossee-Arlman mechanism within the reaction pathway has been confirmed.It is noteworthy that the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst exhibits remarkable stability exceeding 80 h in the selective trimerization of propylene.These research findings significantly enhance our understanding of the mechanisms underlying olefin oligomerization reactions and provide invaluable insights for the development of more effective catalysts.
基金supported by the National Natural Science Foundation of China (62205072)Natural Science Foundation of Guangxi(2022GXNSFBA035656)+1 种基金Science and Technology Agency of Guangxi (GuikeAD20159054)Education Department of Guangxi (2019KY0004)。
文摘With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu^(2+) ions were incorporated Wnto CsCu_(2)I_(3) microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu^(2+)and 582 nm yellow emission from self-trapped exciton e mission of CsCu_(2)I_(3).The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu^(2+)-doped CsCu_(2)I_(3) shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K^(-1)(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu^(2+)-doped GsCu_(2)I_(3) could be a good candidate for highly sensitive optical thermometer.
文摘The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.
基金Project supported by the Changjiang Scholars and Innovative Research Team in University
文摘Sb-doped SnO2(ATO)-(CeO2-TiO2) thin Films were deposited on glass substrates using the mixed solution including CeO2-TiO2 precursor and ATO particles by sol-gel dip coating process.ATO particles were prepared using low-temperature hydrothermal process.The mixed molar ratio of ATO to(CeO2-TiO2) vs the properties of CeO2-TiO2 thin film was investigated.The optical properties of the films were characterized by UV-visible transmission and infrared reflection spectra,the sheet resistance of ATO particles and films were measured by rubber sheeter(MYI-50) and four-point probe(HisuperGroup Inc,SDY-5),the surface morphology and structure of the films were analyzed using 3D Digitale Mikroskop and X-ray diffraction(XRD),respectively.The results showed that the ATO precursor solution lost weight completely at about 500 oC,and the ATO particles was obtained,which indicated the same rutile lattice structure as SnO2.The glass substrates coated with ATO-(CeO2-TiO2) thin films showed better properties in antistatic electricity(104-106 Ω/),shielding UV(almost 100%),visible light transmission(70%) and infrared reflection(】30%).
基金financially supported by the National Key R&D Program of China (No. 2018YFB1502203-1)the Guangdong Basic and Applied Basic Research Foundation (No. 2021B1515120087)the Stable Supporting Fund of Shenzhen, China (No. GXWD20201230155427003-202007 28114835006)
文摘Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.
文摘In the present study,we synthesized CeO2 catalysts doped with various transition metals(M=Co,Fe,or Cu)using a supercritical water hydrothermal route,which led to the incorporation of the metal ions in the CeO2 lattice,forming solid solutions.The catalysts were then used for the selective catalytic reduction(SCR)of NO by CO.The Cu‐doped catalyst exhibited the highest SCR activity;it had a T50(i.e.,50%NO conversion)of only 83°C and a T90(i.e.,90%NO conversion)of 126°C.Such an activity was also higher than in many state‐of‐the‐art catalysts.In situ diffuse reflectance Fourier transform infrared spectroscopy suggested that the MOx‐CeO2 catalysts(M=Co and Fe)mainly followed an Eley‐Rideal reaction mechanism for CO‐SCR.In contrast,a Langmuir‐Hinshelwood SCR reaction mechanism occurred in CuO‐CeO2 owing to the presence of Cu+species,which ensured effective adsorption of CO.This explains why CuO‐CeO2 exhibited the highest activity with regard to the SCR of NO by CO.
基金Project(2011FZ030)supported by the Natural Science Foundation of Yunnan Province,ChinaProjects(2011144,2011221)supported by Analysis and Test Foundation of Kunming University of Science and Technology,China
文摘Mesoporous CeO2 was first synthesized by hydrothermal method,and then used to synthesize different contents of CuO)x/CeO2(x:molar ratio of Cu to Ce) by deposition-precipitation method.These materials were characterized by X-ray diffraction(XRD),N2 adsorption and desorption,H2 temperature programmed reduction(H2-TPR) and O2 temperature programmed desorption(O2-TPD) to study the crystal structure,surface area,and the mechanism of CO oxidation.The results show that,on XRD patterns,no evidence of CuO diffraction peaks is present until Cu loading is increased to 20%.The BET surface area decreases noticeably with the increase of Cu content.Compared with other samples,the better reducibility and activity oxygen species of(CuO)10%/CeO2coincide with its better catalytic activity.
基金the financial support from NNSFC(Project 21373054,21303023,21173052)the Natural Science Foundation of Shanghai Science and Technology Committee(08DZ2270500)
文摘The morphology effect of Zr-doped CeOwas studied in terms of their activities in the selective oxidation of styrene to styrene oxide using tert-butyl hydroperoxide as the oxidant. In the present work, Zrdoped CeOnanorods exhibited the highest catalytic performance（yield of styrene oxide and TOF value）followed by nanoparticles and nanocubes. For the Zr-doped CeOnanorods, the apparent activation energy is 56.3 k J/mol, which is much lower than the values of catalysts supported on nanoparticles and nanocubes（73.3 and 93.4 k J/mol）. The high resolution transmission electron microscopy results indicated that（100） and（110） crystal planes are predominantly exposed for Zr-doped CeOnanorods while（100）and（111） for nanocubes,（111） for nanoparticles. The remarkably increased catalytic activity of the Zrdoped CeOnanorods is mainly attributed to the higher percentage of Cespecies and more oxygen vacancies, which are associated with their exposed（100） and（110） crystal planes. Furthermore, recycling studies proved that the heterogeneous Zr-doped CeOnanorods did not lose its initial high catalytic activity after five successive recycles.
基金Project supported by National Natural Science Foundation of China(51972097)This work was financially supported by the Science Foundation of Hebei Normal University,China(L2019K11).This work was also financially supported by the project WINLEDS—POCI-01-0145-FEDER-030351 and developed within the scope of the project CICECO-Aveiro Institute of Materials,FCT Ref.UID/CTM/50011/2019,financed by national funds through the FCT/MCTES.
文摘The Sr2 CeO4:Ln3+(Ln=Eu,Dy)fine phosphor particles were prepared by a facile wet chemical approach,in which the consecutive hydrothermal-combustion reaction was performed.The doping of Ln3+into Sr2 CeO4 has little influence on the structure of host,and the as-prepared samples display wellcrystallized spherical or elliptical shape with an average particle size at about 100-200 nm.For Eu3+ions-doped Sr2 CeO4,with the increase of Eu3+-doping concentration,the blue light emission band with the maximum at 468 nm originating from a Ce4+→O2-charge transfer of the host decreases obviously and the characteristic red light emission of Eu3+(5 D0→7 F2 transition at 618 nm)is enhanced gradually.Simultaneously,the fluorescent lifetime of the broadband emission of Sr2 CeO4 decreases with the doping of Eu3+,indicating an efficient energy transfer from the host to the doping Eu3+ions.The ene rgy transfer efficiency from the host to Eu3+was investigated in detail,and the emitting color of Sr2 CeO4:Eu3+can be easily tuned from blue to red by varying the doping concentration of Eu3+ions.Moreover,the luminescence of Dy3+-doped Sr2 CeO4 was also studied.Similar energy transfer pheno menon can be observed,and the incorporation of Dy3+into Sr2 CeO4 host leads to the characteristic emission of 4 F9/2→6 H15/2(488 nm,blue light)and 4 F9/2→6 H13/2(574 nm,yellow light)of Dy3+.The Sr2 CeO4:Ln3+fine particles with tunable luminescence are quite beneficial for its potential applications in the optoelectronic fields.
基金Funded by the National Natural Science Foundation of China(No.51372197)the Basic Research Plan of Natural Science of Shaanxi Province(No.2020JQ-754)+4 种基金the Key Innovation Team of Shaanxi Province(No.2014KCT-04)the Special Project of Shaanxi Province(No.19JK0490)the Construction and Promotion of Highlevel Achievements in Material Science and Engineering Discipline of Xi’an University of Science and Technology(No.2040519061)the Study on Preparation and Properties of New Solid-wastebased Cementitious Materials(No.6000190120)the Xi’an University of Science and Technology Doctoral Start-up Project(No.2018QDJ011)。
文摘A novel V-doped CeO_(2)-supported alkali-activated-steel-slag-based catalyst(V-CeO_(2)/AC)for photocatalytic decomposition of water to hydrogen was prepared via co-impregnation method.The chemical composition,mineral phase,morphology,and optical performances of the synthesized catalyst samples were characterized by XRF,XRD,SEM,UV-Vis DRS,and so on.XRD and SEM results show that calcium silicate hydrate(Ca1.5SiO3.5·xH2O)mineral phase is formed in the carrier sample,and the prepared catalyst specimens are made up of approximately 50 nm particles.After 6 hours of xenon lamp irradiation,the catalyst supported on V-doped 8wt%CeO_(2) exhibits the highest photocatalytic hydrogen production activity(8292μmol/g),which is attributed to the interaction between the V-doped CeO_(2) active components and FeO existed in catalyst carrier.A possible photocatalytic decomposition of water for hydrogen production mechanism over the V-8CeO_(2)/AC catalyst was proposed.
文摘The electrical properties of TiO2-based varistor ceramics with different amount of CeO2 were investigated by measuring the properties of V-I, permittivity, density and boundary defect barriers. It is found that an optimal composition doped with 0.7% CeO2 exhibits the highest nonlinear coefficient of 10.5, the highest breakdown voltage of 12.77 V·mm^-1, the ultrahigh permittivity of 82900（measured at 1 kHz）, and the highest density of 4.15 g·cm^-3, which is consistent with the highest and narrowest grain-boundary defect barriers. In order to illustrate the grain boundary barriers formation in TiO2-Nb2O5-MnCO3-CeO2 varistor, an grain-boundary defect barrier model was also introduced.
基金Project supported by the National Natural Science Foundation of China(Grant No.61306098)
文摘The N and C doping effects on the crystal structures, electronic and optical properties of fluorite structure CeO2 have been investigated using the first-principles calculation. Co-doping these two elements results in the local lattice distortion and volume expansion of CeO2. Compared with the energy hand structure of pure CeO2, some local energy levels appear in the forbidden band, which may facilitate the light absorption. Moreover, the enhanced photo-catalytic properties of CeO2 were explained through the absorption spectra and the selection rule of the band-to-band transitions.
基金the Department of Education of Hebei Province, China (No.2005362)
文摘Cu^2＋-doped nanostructured TiO2-coated SiO2 （TiO2/SiO2） particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized by the sol-gel method using TiOSO4 as a precursor. The experimental results showed that TiO2 nanopowders on the surface of SiO2 particles were well distributed and compact. The amount of TiO2 increased with the increase in coating layers. The shell structure appeared to be composed of anatase titania nanocrystals at 550℃. The 2-layer coated TiO2 particles on the surface showed a higher degradation rate compared with all the different-layer samples. The photocatalytic activity of Cu^2＋-doped TiO2/SiO2 was higher than that ofundoped TiO2/SiO2. The optimum dopant content was about 0.10wt%.
基金Project supported by the National Natural Science Foundation of China(51872207,51672192)。
文摘In this work,Eu^(3+)-doped CsPbCl_(2)Br_(1) in borosilicate glass was successfully synthesized by the melt quenching annealing technique and crystallization method.This work reports a novel Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite quantum dots(QDs)glass with high sensitivity for optical temperature sensing.The relation of fluorescence intensity ratio(FIR)with the temperature was studied in the temperature range of 80-440 K.Notably,the maximum absolute temperature sensitivity(Sa)and relative temperature sensitivity(Sr)of Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite QDs glass can reach as high as 0.0315 K-1 and3.097%/K,respectively.Meanwhile,Eu^(3+)-doped CsPbCl_(2)Br_(1) QDs glass demonstrates good water resistance,excellent thermal and cold cycling stability performance,The Eu^(3+)-doped QDs glass materials can bring inspiration to the future exploration of rare earth ion-doped QDs glass material on the application of optical temperature sensing in the future.
文摘The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of thin films were inspected at different sintering temperatures by constructing a humidity-impedance measuring system. It was found that the addition of rare earth ion La^3＋ and alkali ion K^＋ was beneficial for improving the humidity sensitive properties of the samples and La0.003K0.5Ti0.9Sn0.1O2 sintered at 500 ℃ for 4 h showed the best humidity sensing properties. The impedance of this thin film decreased from 109 to 104 Ω with excellent linearity in the humidity range of 11%-95%. Narrow hysteresis loop, prominent stability and high sensitivity were obtained. The effects of dopant con-tent and doping mechanism on humidity sensitivity were also discussed in terms of segregation of rare earth ions at grain boundaries and granularity of crystalline and influence of K^＋ on the decrease in the intrinsic resistance of the materials, and increase in the number of wa-ter adsorption sites.
基金Supported by the National Natural Science Foundation of China under No 50562002, the New Century Excellent Talents in University （NCET-06-0576）, the Key Industrial Project of Jiangxi Provincial Department of Science and Technology [2005]52, Jiangxi Provincial Department of Education [2005]217, the Natural Science Foundation of Jiangxi Province （No 0650074）, and the Center for Smart Materials of The Hong Kong Polytechnic University.
文摘Lead-free piezoelectric ceramics 0.92（Bi0.5Na0.5）TiO3-0.08BaTiO3 ＋ xmol% Co3＋ （BNBT-Co, x = 0-8） are prepared by the solid state reaction method. Effects of the amount of Co^3＋ on the electrical properties and phase transition are studied. The results indicate that the addition of Co^3＋ enhances the mechanical quality factor Q^3＋ significantly, whereas the dissipation factor tanδ has a minimum value at x = 3.5. Meanwhile, addition of Co^3＋ leads to small decreases of piezoelectric constant d33, and planar electromechanical coupling kp. The present 0.92（Bio.aNao.5） TiO3-0.08BaTiO3＋3.5 moi% Co^3＋ ceramics exhibit good performance with mechanical quality factor Qm = 910, piezoelectric constant d33 = 106pC/N, planar electromechanical coupling kp =10% and dissipation factor tanδ = 1.1% at 1 kHz. Saturated polarization hysteresis loops have been obtained for BNBT-Co ceramics. Two dielectric peaks at depolarization temperature Td and Tm appear in the curves of ε33^T vs temperature for the pure BNBT ceramics. However, the first dielectric peak Td disappears after the addition of Co^3＋, which means that the transition from ferroelectric to antiferroelectric phase has been eliminated.
基金Supported by National Natural Science Foundation of China (No.60577023)Key Laboratory of Opto-Electronics Information and Technical Science of Ministry of Education,China
文摘In order to achieve a modulator with broad bandwidth and perfect impedance match,a novel electro-optical modulator based on GeO2-doped silica waveguides on silicon substrate is designed.The finite element model of the whole electro-optical modulator is established by means of ANSYS.With the finite element method analysis,the performance of the novel modulator is predicted.The simulation reveals that the designed modulator operates with a product of 3 dB optical bandwidth and modulating length of 226.59 GHz·cm,and a characteristic impedance of 51.6 Ω at 1 550 nm wavelength.Moreover,the calculated electrical reflected power of coplanar waveguide electrode is below-20 dB in the frequency ranging from 45 MHz to 65 GHz.Therefore,the designed modulator has wide modulation bandwidth and perfect impedance match.
基金supported by the Education Department of Zhejiang Province (20050359)
文摘A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3＋. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3＋-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.
文摘Sr1-xLa2x/3Bi2Nb20O （0 ≤ x ≤0.2） ceramic samples are prepared by the solid-state reaction method. Their structure, dielectric and ferroelectric properties are investigated. The incorporation of La^3＋ improves the den- sification and decreases the grain size of the ceramics without changing the crystal structure. The remanent polarization 2PT increases with increasing La content and reaches a maximum value of 22.8μC/cm^2 at x = 0.125, which is approximately 60% larger than that of pure SrBi2Nb2O9. The Curie temperature keeps almost unchanged at a value of about 440℃. The relationship between doping and the ferroeleetrie and dielectric properties are discussed.
基金The authors would like to thank the financial support by a 2019 research fund from Chosun University.
文摘We report the structural and photoluminescence(PL) properties of Nd^(3+)-doped Y_(2)O_(3)-SiO_(2) powders(Y_(2)O_(3)-SiO_(2):Nd^(3+)) as functions of annealing temperature and Nd^(3+) ion doping concentration.Y_(2)O_(3)-SiO_(2):Nd^(3+)powders were prepared using the high-energy ball-milling(HEBM) method,and their structural and PL properties were investigated using X-ray diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,and PL spectroscopy.The XRD results reveal a cubic phase without impurities,and the peak broadening decreases with an increase in annealing temperature due to the increase in the crystallite size.The PL emission intensity increases with an increase in annealing temperature.The highest PL emission intensity is observed for the 300-min milled mixture annealed at 1000℃ for 1 h with a Nd^(3+) concentration of 1 mol%.The PL peaks excited by 800 nm radiation were detected,centered at 1080 nm(^(4)F_(3/2)→^(4)I_(11/2)) and 1350 nm(^(4)F_(3/2)→^(4)I_(13/2)).
