Decoloration and mineralization of yeast wastewater were investigated by using Ce-Fe/Al2O3 as a heterogeneous photo-Fenton catalyst in fluidized bed reactor in order to solve the problem of yeast wastewater discharge....Decoloration and mineralization of yeast wastewater were investigated by using Ce-Fe/Al2O3 as a heterogeneous photo-Fenton catalyst in fluidized bed reactor in order to solve the problem of yeast wastewater discharge. The experimental results were assessed in terms of total organic carbon（TOC） reduction. The operational and reaction conditions affecting the efficiencies of TOC removal such as initial pH value, H2O2 concentration, catalyst loading and UV power were studied. The results show that TOC is reduced from 347.6 mg/L to 10.8 mg/L, color is changed from 500 units to 0 under the conditions as follows： initial pH value 6. 0, H2O2 concentration of 1. 000 g/L, catalyst loading of 5 g/L, reaction duration of 120 rain and reaction temperature of 30 ℃. The irradiated Ce-Fe/Al2O3 catalyst was complexed with 1,10-phenanthroline and then it was subjected to Fourier transform infrared spectroscopy and diffuse reflectance spectroscopy to confirm the formation of Fe（Ⅱ） in the solid state. Heterogeneous photo-Fenton reaction proves to be effective for the treatment of yeast wastewater.展开更多
The ineluctable introduction of lithium salt to polymer solid-state electrolytes incurs a compromise between strength,ionic conductivity,and thickness.Here,we propose Al_(2)O_(3)-coated polyimide(AO/PI)porous film as ...The ineluctable introduction of lithium salt to polymer solid-state electrolytes incurs a compromise between strength,ionic conductivity,and thickness.Here,we propose Al_(2)O_(3)-coated polyimide(AO/PI)porous film as a high-strength substrate to support fast-ion-conducting polymer-in-salt(PIS)solid-state electrolytes,aiming to suppress lithium dendrite growth and improve full-cell performance.The Al_(2)O_(3)coating layer not only refines the wettability of polyimide porous film to PIS,but also performs as a high modulus protective layer to suppress the growth of lithium dendrites.The resulting PI/AO@PIS exhibits a small thickness of only 35μm with an outstanding tensile strength of 11.3 MPa and Young's modulus of 537.6 MPa.In addition,the PI/AO@PIS delivers a high ionic conductivity of 0.1 m S/cm at 25°C.As a result,the PI/AO@PIS enables symmetric Li cells to achieve exceptional cyclability for over 1000 h at 0.1 m A/cm2without noticeable lithium dendrite formation.Moreover,the PI/AO@PIS-based LiFePO4||Li full cells demonstrate outstanding rate performance(125.7 m Ah/g at 5 C)and impressive cycling stability(96.1%capacity retention at 1 C after 200 cycles).This work highlights the efficacy of enhancing the mechanical properties of polymer matrices and extending cell performance through the incorporation of a dense inorganic interface layer.展开更多
以纳米ZrO 、微米Al O 为原料,采用无压烧结方式制备了ZTA 复相陶瓷。结果表明:nano-ZrO 的 2 2 3 2加入有利于制备细晶ZTA 复相陶瓷。此外,nano-ZrO 的加入对 Al O 陶瓷的显微结构也产生影响,ZrO ...以纳米ZrO 、微米Al O 为原料,采用无压烧结方式制备了ZTA 复相陶瓷。结果表明:nano-ZrO 的 2 2 3 2加入有利于制备细晶ZTA 复相陶瓷。此外,nano-ZrO 的加入对 Al O 陶瓷的显微结构也产生影响,ZrO 颗粒以 2 2 3 2“晶内型”和晶界型两种形式存在。合理的配方组成及制备工艺有利于 Z r O 以四方亚稳相存在。Z r O 含量为 2 23 0 w t % 时,其四方相含量可达 6 9 %,有利于应力诱导相变增韧,该 Z T A 复相陶瓷的抗弯强度、断裂韧性分别达到 604MPa、6.87MPa·m1/2。展开更多
基金Project(20277010) supported by the National Natural Science Foundation of China
文摘Decoloration and mineralization of yeast wastewater were investigated by using Ce-Fe/Al2O3 as a heterogeneous photo-Fenton catalyst in fluidized bed reactor in order to solve the problem of yeast wastewater discharge. The experimental results were assessed in terms of total organic carbon（TOC） reduction. The operational and reaction conditions affecting the efficiencies of TOC removal such as initial pH value, H2O2 concentration, catalyst loading and UV power were studied. The results show that TOC is reduced from 347.6 mg/L to 10.8 mg/L, color is changed from 500 units to 0 under the conditions as follows： initial pH value 6. 0, H2O2 concentration of 1. 000 g/L, catalyst loading of 5 g/L, reaction duration of 120 rain and reaction temperature of 30 ℃. The irradiated Ce-Fe/Al2O3 catalyst was complexed with 1,10-phenanthroline and then it was subjected to Fourier transform infrared spectroscopy and diffuse reflectance spectroscopy to confirm the formation of Fe（Ⅱ） in the solid state. Heterogeneous photo-Fenton reaction proves to be effective for the treatment of yeast wastewater.
基金the financial support from the 261Project of MIIT and Natural Science Foundation of Jiangsu Province(No.BK20240179)。
文摘The ineluctable introduction of lithium salt to polymer solid-state electrolytes incurs a compromise between strength,ionic conductivity,and thickness.Here,we propose Al_(2)O_(3)-coated polyimide(AO/PI)porous film as a high-strength substrate to support fast-ion-conducting polymer-in-salt(PIS)solid-state electrolytes,aiming to suppress lithium dendrite growth and improve full-cell performance.The Al_(2)O_(3)coating layer not only refines the wettability of polyimide porous film to PIS,but also performs as a high modulus protective layer to suppress the growth of lithium dendrites.The resulting PI/AO@PIS exhibits a small thickness of only 35μm with an outstanding tensile strength of 11.3 MPa and Young's modulus of 537.6 MPa.In addition,the PI/AO@PIS delivers a high ionic conductivity of 0.1 m S/cm at 25°C.As a result,the PI/AO@PIS enables symmetric Li cells to achieve exceptional cyclability for over 1000 h at 0.1 m A/cm2without noticeable lithium dendrite formation.Moreover,the PI/AO@PIS-based LiFePO4||Li full cells demonstrate outstanding rate performance(125.7 m Ah/g at 5 C)and impressive cycling stability(96.1%capacity retention at 1 C after 200 cycles).This work highlights the efficacy of enhancing the mechanical properties of polymer matrices and extending cell performance through the incorporation of a dense inorganic interface layer.
文摘以纳米ZrO 、微米Al O 为原料,采用无压烧结方式制备了ZTA 复相陶瓷。结果表明:nano-ZrO 的 2 2 3 2加入有利于制备细晶ZTA 复相陶瓷。此外,nano-ZrO 的加入对 Al O 陶瓷的显微结构也产生影响,ZrO 颗粒以 2 2 3 2“晶内型”和晶界型两种形式存在。合理的配方组成及制备工艺有利于 Z r O 以四方亚稳相存在。Z r O 含量为 2 23 0 w t % 时,其四方相含量可达 6 9 %,有利于应力诱导相变增韧,该 Z T A 复相陶瓷的抗弯强度、断裂韧性分别达到 604MPa、6.87MPa·m1/2。
