As an emerging electrochemical energy storage technology,potassium-ion batteries(PIBs),which are considered a“beyond Li-ion”battery system,have attracted tremendous attention due to their potential for providing a h...As an emerging electrochemical energy storage technology,potassium-ion batteries(PIBs),which are considered a“beyond Li-ion”battery system,have attracted tremendous attention due to their potential for providing a high energy density,and having abundant resource,and a low cost.However,their commercialization is hindered by the lack of practical anode materials.Among various reported anodes,conventional carbon materials,including graphite,soft carbon,and hard carbon,have emerged as promising candidates because of their abundance,low cost,high conductivity,and tunable structures.However,these materials have problems such as a low initial Coulombic efficiency,significant volume expansion,and unsatisfactory cyclability and rate performance.Various strategies to solve these have been explored,including optimizing the interlayer spacing,structural design,surface coating,constructing a multifunctional framework,and forming composites.This review provides a comprehensive overview of the recent progress in conventional carbon anodes,highlighting structural design strategies,mechanisms for improving the electrochemical performance,and underscores the critical role of these materials in promoting the practical application of PIBs.展开更多
Laboratory-scale carbon anodes were produced by a new method of high temperature mould pressing, and their physico-chemical properties were studied. The influence of mould pressing conditions and coal pitch addition o...Laboratory-scale carbon anodes were produced by a new method of high temperature mould pressing, and their physico-chemical properties were studied. The influence of mould pressing conditions and coal pitch addition on the bulk density, crushing strength, and oxidation resistance was analyzed. The mierostructure of carbon anodes was investigated by scanning electron microscopy （SEM）, and the mechanism of producing carbon anodes by high-temperature mould pressing was analyzed. The results show that when the anodes are produced by high-temperature mould pressing, coal pitch can expand into the coke particles and fill the pores inside the particles, which is beneficial for improving the quality of prebaked anodes. The bulk density of carbon anodes is 1.64-1.66 g/cm3, which is 0.08-0.12 g/cm3 higher than that of industrial anodes, and the oxidation resistance of carbon anodes is also significantly improved.展开更多
Sodium-ion batteries(SIBs)have attracted significant attentions as promising alternatives to lithium-ion batteries for large-scale energy storage applications.Here carbon materials are considered as the most competiti...Sodium-ion batteries(SIBs)have attracted significant attentions as promising alternatives to lithium-ion batteries for large-scale energy storage applications.Here carbon materials are considered as the most competitive anodes for SIBs based on their low-cost,abundant availability and excellent structural stability.Pitch,with high carbon content and low cost,is an ideal raw precursor to prepare carbon materials for large-scale applications.Nevertheless,the microstructures of pitch-based carbon are highly ordered with smaller interlayer distances,which are unfavorable for Na ion storage.Many efforts have been made to improve the sodium storage performance of pitch-based carbon materials.This review summarizes the recent progress about the application of pitch-based carbons for SIBs anodes in the context of carbon’s morphology and structure regulation strategies,including morphology adjustment,heteroatoms doping,fabricating heterostructures,and the increase of the degree of disorder.Besides,the advantages,present challenges,and possible solutions to current issues in pitch-based carbon anode are discussed,with the highlight of future research directions.This review will provide a deep insight into the development of low-cost and high-performance pitch-based carbon anode for SIBs.展开更多
Silicon(Si)has been studied as a promising alloying type anode for lithium-ion batteries due to its high specific capacity,low operating potential and abundant resources.Nevertheless,huge volume expansion during alloy...Silicon(Si)has been studied as a promising alloying type anode for lithium-ion batteries due to its high specific capacity,low operating potential and abundant resources.Nevertheless,huge volume expansion during alloying/dealloying processes and low electronic conductivity of Si anodes restrict their electrochemical performance.Thus,carbon(C)materials with special physical and chemical properties are applied in Si anodes to effectively solve these problems.This review focuses on current status in the exploration of Si/C anodes,including the lithiation mechanism and solid electrolyte interface formation,various carbon sources in Si/C anodes,such as traditional carbon sources(graphite,pitch,biomass),and novel carbon sources(MXene,graphene,MOFs-derived carbon,graphdiyne,etc.),as well as interfacial bonding modes of Si and C in the Si/C anodes.Finally,we summarize and prospect the selection of carbonaceous materials,structural design and interface control of Si/C anodes,and application of Si/C anodes in all-solid-state lithium-ion batteries and sodium-ion batteries et al.This review will help researchers in the design of novel Si/C anodes for rechargeable batteries.展开更多
Studies have found that oxygen-rich-containing functional groups in carbon-based materials can be used as active sites for the storage performance of K^(+),but the basic storage mechanism is still unclear.Herein,we co...Studies have found that oxygen-rich-containing functional groups in carbon-based materials can be used as active sites for the storage performance of K^(+),but the basic storage mechanism is still unclear.Herein,we construct and optimize 3D honeycomb-like carbon grafted with plentiful COOH/C=O functional groups(OFGC)as anodes for potassium ion batteries.The OFGC electrode with steady structure and rich functional groups can effectively contribute to the capacity enhancement and the formation of stable solid electrolyte interphase(SEI)film,achieving a high reversible capacity of 230 mAh g^(-1) at 3000 mA g^(-1) after 10,000 cycles(almost no capacity decay)and an ultra-long cycle time over 18 months at 100 mA g^(-1).The study results revealed the reversible storage mechanism between K^(+)and COOH/C=O functional groups by forming C-O-K compounds.Meanwhile,the in situ electrochemical impedance spectroscopy proved the highly reversible and rapid de/intercalation kinetics of K+in the OFGC electrode,and the growth process of SEI films.In particular,the full cells assembled by Prussian blue cathode exhibit a high energy density of 113 Wh kg^(-1) after 800 cycles(calculated by the total mass of anode and cathode),and get the light-emitting diodes lamp and ear thermometer running.展开更多
The anodic over voltage of the carbon anode in aluminumelectrolysis is of the order of 0.6 V at normal current densities.However, it can be reduced somewhat by doping the anode carbon withvarious inorganic compounds. ...The anodic over voltage of the carbon anode in aluminumelectrolysis is of the order of 0.6 V at normal current densities.However, it can be reduced somewhat by doping the anode carbon withvarious inorganic compounds. A new apparatus was designed to improvethe precision of over voltage measurements. Anodes were doped withMgAl_2O_4 and AlF_3 both by impregnation of the coke and by addingpowder, and the measured over voltage was compared with that ofUndoped samples. For prebake type anodes baked at around 1150 deg. C,the anodic overvoltage was reduced by 40-60 mV, And for Soderbergtype anodes, baked at 950 deg. C, by 60-80 mV.展开更多
The properties and blending recipe of petroleum cokes used to make high quality carbon anodes for aluminium electrolysis were studied. Three kinds of green cokes were selected for bench scale study to illustrate the e...The properties and blending recipe of petroleum cokes used to make high quality carbon anodes for aluminium electrolysis were studied. Three kinds of green cokes were selected for bench scale study to illustrate the effects of cokes properties and its blending recipe on anode performances. The results show that impurities derived mainly fi＇om cokes remarkably affect the CO2 reactivity and air reactivity of carbon anodes. Ca, Na and V can increase CO2 reactivity of calcined cokes but S has the contrary effect, and the cokes of high V level generally present high air reactivity. The anodes with good quality can be made by properly selecting and scientifically blending of cokes, some poor quality cokes can also be used to produce high quality anodes with a reasonable blending recipe. Na contaminated anodes have high CO2 reactivity and air reactivity, so the recycled anode butts should be well cleaned to reduce Na content before being introduced into anode production, which is especially important to the low S cokes.展开更多
The resourceful and inexpensive red phosphorus has emerged as a promising anode material of potassium-ion batteries(PIBs) for its large theoretical capacities and low redox potentials in the multielectron alloying/dea...The resourceful and inexpensive red phosphorus has emerged as a promising anode material of potassium-ion batteries(PIBs) for its large theoretical capacities and low redox potentials in the multielectron alloying/dealloying reactions,yet chronically suffering from the huge volume expansion/shrinkage with a sluggish reaction kinetics and an unsatisfactory interfacial stability against volatile electrolytes.Herein,we systematically developed a series of localized high-concentration electrolytes(LHCE) through diluting high-concentration ether electrolytes with a non-solvating fluorinated ether to regulate the formation/evolution of solid electrolyte interphases(SEI) on phosphorus/carbon(P/C) anodes for PIBs.Benefitting from the improved mechanical strength and structural stability of a robust/uniform SEI thin layer derived from a composition-optimized LHCE featured with a unique solvation structure and a superior K+migration capability,the P/C anode with noticeable pseudocapacitive behaviors could achieve a large reversible capacity of 760 mA h g^(-1)at 100 mA g^(-1),a remarkable capacity retention rate of 92.6% over 200 cycles at 800 mA g^(-1),and an exceptional rate capability of 334 mA h g^(-1)at8000 mA g^(-1).Critically,a suppressed reduction of ether solvents with a preferential decomposition of potassium salts in anion-derived interfacial reactions on P/C anode for LHCE could enable a rational construction of an outer organic-rich and inner inorganic-dominant SEI thin film with remarkable mechanical strength/flexibility to buffer huge volume variations and abundant K+diffusion channels to accelerate reaction kinetics.Additionally,the highly reversible/durable full PIBs coupling P/C anodes with annealed organic cathodes further verified an excellent practical applicability of LHCE.This encouraging work on electrolytes regulating SEI formation/evolution would advance the development of P/C anodes for high-performance PIBs.展开更多
The initial efficiency is a very important criterion for carbon anode material of Li-ion battery.The relationship between initial efficiency and structure parameters of carbon anode material of Li-ion battery was inve...The initial efficiency is a very important criterion for carbon anode material of Li-ion battery.The relationship between initial efficiency and structure parameters of carbon anode material of Li-ion battery was investigated by an artificial intelligence approach called Random Forests using D10,D50,D90,BET specific surface area and TP density as inputs,initial efficiency as output.The results give good classification performance with 91%accuracy.The variable importance analysis results show the impact of 5 variables on the initial efficiency descends in the order of D90,TP density,BET specific surface area,D50 and D10;smaller D90 and larger TP density have positive impact on initial efficiency.The contribution of BET specific surface area on classification is only 18.74%,which indicates the shortcoming of BET specific surface area as a widely used parameter for initial efficiency evaluation.展开更多
Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiv...Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.展开更多
Carbon-based materials are recognized as anodes fulling of promise for potassium ion batteries(PIBs)due to advantages of affordable cost and high conductivity.However,they still face challenges including structural un...Carbon-based materials are recognized as anodes fulling of promise for potassium ion batteries(PIBs)due to advantages of affordable cost and high conductivity.However,they still face challenges including structural unstability and slow kinetics.It is difficult to achieve efficient potassium storage with unmodified carbonaceous anode.Herein,atomic bismuth(Bi)sites with different atom coordinations anchored on carbon nanosheets(CNSs)have been synthesized through a template method.The properties of prepared multi-doping carbon anodes Bi-N_(3)S_(1)/CNSs,Bi-N_(3)P_(1)/CNSs and Bi-N_(4)/CNSs were probed in PIBs.The configuration Bi-N_(3)S_(1) with stronger charge asymmetry exhibits superior potassium storage performance compared to Bi-N_(3)P_(1) and Bi-N_(4) configurations.The Bi-N_(3)S_(1)/CNSs display a rate capacity of 129.2 mAh g^(-1)even at 10 A g^(-1)and an impressive cyclability characterized by over 5000 cycles at 5 A g^(-1),on account of its optimal coordination environment with more active Bi centers and K^(+)adsorption sites.Notably,assembled potassium-ion full cell Mg-KVO//Bi-N_(3)S_(1)/CNSs also shows an outstanding cycling stability,enduring 3000 cycles at 2 A g^(-1).Therefore,it can be demonstrated that regulating the electronic structure of metallic centre M-N_(4) via changing the type of ligating atom is a feasible strategy for modifying carbon anodes,on the base of co-doping metal and non-metal.展开更多
With the swift advancement of renewable energy and escalating demands for energy storage,potassium-ion batteries(PIBs)are increasingly recognized as a potent energy storage techn ology.Various carbon anode materials h...With the swift advancement of renewable energy and escalating demands for energy storage,potassium-ion batteries(PIBs)are increasingly recognized as a potent energy storage techn ology.Various carbon anode materials have been utilized for PIBs anodes owing to their superior K^(+)storage capacity,outstanding cycling performance,elevated capacity,and cost-effectiveness.Therefore,it is imperative to explore and improve carbon anode materials.This review meticulously encapsulates the recent scholarly advancements in carbon anode materials for PIBs.It elucidates the operational mechanisms of carbon anode for PIBs,provides a synopsis of diverse carbon materials,and deliberates on the prevalent challenges,including cycling stability and potassium-ion diffusion rates.Although soft and hard carbon augmented potassiumion capacities,the expansive surface areas coupled with the large ionic radius of K^(+)pose substantial challenges to their structural design and optimization.Consequently,this review outlines strategic approaches to the design of carbon materials for excellent potassium storage performance,including the expansion of interlayer spacing,modification of morphology,heteroatom doping,structural defect regulation,incorporation of porous structures,and development of carbon-carbon composites.Finally,the challenges and prospective solutions of carbon anode materials for PIBs with superior energy density and cycling stability were proposed,providing a reasonable guidance for regulation design of carbon materials.展开更多
The corrosion inhibition efficacy of titanate(CaTiO_(3))for carbon anodes in molten salts was investigated through various analytical techniques,including linear sweep voltammetry,X-ray diffraction,scanning electron m...The corrosion inhibition efficacy of titanate(CaTiO_(3))for carbon anodes in molten salts was investigated through various analytical techniques,including linear sweep voltammetry,X-ray diffraction,scanning electron microscopy,and energy dispersion spectroscopy.The results demonstrate that the addition of CaTiO_(3)corrosion inhibitor efficiently passivates the carbon anode and leads to the formation of a dense CaTiO_(3)layer during the electrolysis process in molten CaCl_(2)-CaO.Subsequently,the passivated carbon anode effectively undergoes the oxygen evolution reaction,with an optimal current density for passivation identified at 400 m A/cm^(2).Comprehensive investigations,including CaTiO_(3)solubility tests in molten CaCl_(2)-CaO and numerical modeling of the stability of complex ionic structures,provide compelling evidence supporting“complexation-precipitation”passivation mechanism.This mechanism involves the initial formation of a complex containing TiO_(2)·nCaO by CaTiO_(3)and CaO,which subsequently decomposes to yield CaTiO_(3),firmly coating the surface of the carbon anode.In practical applications,the integration of CaTiO_(3)corrosion inhibitor with the carbon anode leads to the successful preparation of the FeCoNiCrMn high-entropy alloy without carbon contamination in the molten CaCl_(2)-CaO.展开更多
Developing facile and economical strategies to fabricate nitrogen-doped porous carbon anode is desirable for dual-carbon potassium ion hybrid capacitors(PIHCs).Here,a high-concentration edge-nitrogen-doped porous carb...Developing facile and economical strategies to fabricate nitrogen-doped porous carbon anode is desirable for dual-carbon potassium ion hybrid capacitors(PIHCs).Here,a high-concentration edge-nitrogen-doped porous carbon(NPC)anode is synthesized by a template-free strategy,in which the total content of pyrrolic nitrogen and pyridinic nitrogen accounts for more than 80%of the nitrogen atoms.As a result,the NPC anode displays a capacity of 315.4 mA h g^(−1)at a current rate of 0.1 A g^(−1)and 189.1 mA h g^(−1)at 5 A g^(−1).Ex situ characterizations and density functional theory calculations demonstrate the high-concentration edge-nitrogen doping enhances K^(+)adsorption and electronic conductivity of carbon materials,resulting in good electrochemical performance.The assembled NPC//CMK-3 PIHC delivers an energy density of 71.1 W h kg^(−1)at a power density of 771.9 W kg^(−1)over 8,000 cycles.展开更多
Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batterie...Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.展开更多
To achieve high energy density in lithium batteries,the construction of lithium-ion/metal hybrid anodes is a promising strategy.In particular,because of the anisotropy of graphite,hybrid anode formed by graphite/Li me...To achieve high energy density in lithium batteries,the construction of lithium-ion/metal hybrid anodes is a promising strategy.In particular,because of the anisotropy of graphite,hybrid anode formed by graphite/Li metal has low transport kinetics and is easy to causes the growth of lithium dendrites and accumulation of dead Li,which seriously affects the cycle life of batteries and even causes safety problems.Here,by comparing graphite with two types of hard carbon,it was found that hybrid anode formed by hard carbon and lithium metal,possessing more disordered mesoporous structure and lithophilic groups,presents better performance.Results indicate that the mesoporous structure provides abundant active site and storage space for dead lithium.With the synergistic effect of this structure and lithophilic functional groups(–COOH),the reversibility of hard carbon/lithium metal hybrid anode is maintained,promoting uniform deposition of lithium metal and alleviating formation of lithium dendrites.The hybrid anode maintains a 99.5%Coulombic efficiency(CE)after 260 cycles at a specific capacity of 500 m Ah/g.This work provides new insights into the hybrid anodes formed by carbon-based materials and lithium metal with high specific energy and fast charging ability.展开更多
Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in d...Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.展开更多
Carbonaceous materials have drawn much attention in potassium-ion batteries (PIBs) due to their low price and superior physicochemical properties. However, the application of carbonaceous materials in PIB anodes is hi...Carbonaceous materials have drawn much attention in potassium-ion batteries (PIBs) due to their low price and superior physicochemical properties. However, the application of carbonaceous materials in PIB anodes is hindered by sluggish kinetics and large volume expansion. Herein, N/S co-doped carbon nanocapsule (NSCN) is constructed for superior K+ storage. The NSCN possesses 3D nanocapsule framework with abundant meso/macropores, which guarantees structural robustness and accelerates ions/electrons transportation. The high-level N/S co-doping in carbon matrix not only generates ample defects and active sites for K+ adsorption, but also expands interlayer distance for facile K+ intercalation/deintercalation. As a result, the NSCN electrode delivers a high reversible capacity (408 mAh g^(−1) at 0.05 A g^(−1)), outstanding rate capability (149 mAh g^(−1) at 5 A g^(−1)) and favorable cycle stability (150m Ah g^(−1) at 2 A g^(−1) after 2000 cycles). Ex situ TEM, Raman and XPS measurements demonstrate the excellent stability and reversibility of NSCN electrode during potassiation/depotassiation process. This work provides inspiration for the optimization of energy storage materials by structure and doping engineering.展开更多
Carbon-based materials have attracted much interest as one of the promising anodes for sodium-ion batteries. However, low utilization of electrolyte and slow ion-transfer rate during electrochemical process hinder the...Carbon-based materials have attracted much interest as one of the promising anodes for sodium-ion batteries. However, low utilization of electrolyte and slow ion-transfer rate during electrochemical process hinder the further application of traditional bulk carbon. In order to enhance the diffusion kinetics and maintain the reversibility, hierarchical hollow carbon microbox was successfully prepared through a tunable bottom-up self-template routine for sodium-ion batteries. During annealing process, the morphology construction and activation happened synchronously. Based on that, a range of cross-linked porous nanosheet and hollow microbox were attained by manipulating reactant condition. The generation of texture and physical property are analyzed and are established linkages related to the electrochemical behavior. As results depicted in kinetic exploration and simulation based on cyclic voltammetry, the surfacecontrolled electrochemical behavior gradually turns to be the diffusion-controlled behavior as the hollow microbox evolves to porous nanosheet. The probable reason is that the rational microstructure/texture design leads to the accelerated diffusion kinetic procedure and the reduced concentration difference polarization. Sodium storage mechanism was deduced as reversible binding of Na-ions with local defects,including vacancies on sp2 graphitic layers, at the edges of flakes and other structural defects instead of intercalation. Bestowed by the morphology design, the broad pore width distribution, abundant defects/active sites and surface functionality, hollow microbox electrode delivers great electrochemical performances. This work is expected to propose a novel and effective strategy to prepare tunable hierarchical hollow carbon microbox and induce the fast kinetic of carbon anode material.展开更多
The poor rate capability of battery-type anode is usually the bottleneck of the power-energy outputs of a hybrid alkaline metal ion capacitor.In this work,nitrogen and oxygen co-doped mesoporous carbon spheres with ex...The poor rate capability of battery-type anode is usually the bottleneck of the power-energy outputs of a hybrid alkaline metal ion capacitor.In this work,nitrogen and oxygen co-doped mesoporous carbon spheres with excellent rate performance and cycle stability are used as anode materials of sodium ion capacitors(SICs).The high N and O element doping levels as well as the amorphous and mesoporous structure have enabled prominent capacitive Na ion storage behavior,which in turn match well with the capacitive cathode in the hybrid device.Under optimum conditions,the SIC delivers a high energy density of 103.1 Wh kg^(-1)at a power density of 205.6 W kg^(-1).Even at a high power density of 7520 W kg^(-1),an energy density of 23.5 Wh kg^(-1)is still maintained.Moreover,a robust cycle stability with capacity retention of 84.6%after 2500 cycles at 1 A g^(-1)is maintained.Such excellent electrochemical performances convincingly demonstrate that the all-carbon based SICs with the highly capacitive N and O co-doped mesoporous carbon anode can be promising Na ion-based energy storage devices alternative to their Li ion-based counterparts.展开更多
文摘As an emerging electrochemical energy storage technology,potassium-ion batteries(PIBs),which are considered a“beyond Li-ion”battery system,have attracted tremendous attention due to their potential for providing a high energy density,and having abundant resource,and a low cost.However,their commercialization is hindered by the lack of practical anode materials.Among various reported anodes,conventional carbon materials,including graphite,soft carbon,and hard carbon,have emerged as promising candidates because of their abundance,low cost,high conductivity,and tunable structures.However,these materials have problems such as a low initial Coulombic efficiency,significant volume expansion,and unsatisfactory cyclability and rate performance.Various strategies to solve these have been explored,including optimizing the interlayer spacing,structural design,surface coating,constructing a multifunctional framework,and forming composites.This review provides a comprehensive overview of the recent progress in conventional carbon anodes,highlighting structural design strategies,mechanisms for improving the electrochemical performance,and underscores the critical role of these materials in promoting the practical application of PIBs.
基金Project(090302012)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(50934005)supported by the National Natural Science Foundation of China
文摘Laboratory-scale carbon anodes were produced by a new method of high temperature mould pressing, and their physico-chemical properties were studied. The influence of mould pressing conditions and coal pitch addition on the bulk density, crushing strength, and oxidation resistance was analyzed. The mierostructure of carbon anodes was investigated by scanning electron microscopy （SEM）, and the mechanism of producing carbon anodes by high-temperature mould pressing was analyzed. The results show that when the anodes are produced by high-temperature mould pressing, coal pitch can expand into the coke particles and fill the pores inside the particles, which is beneficial for improving the quality of prebaked anodes. The bulk density of carbon anodes is 1.64-1.66 g/cm3, which is 0.08-0.12 g/cm3 higher than that of industrial anodes, and the oxidation resistance of carbon anodes is also significantly improved.
基金financially supported by the Beijing Municipal Science and Technology Commission(Grant No.Z181100004718007)the National Key R&D Program of China(Grant No.2017YFB0102204)。
文摘Sodium-ion batteries(SIBs)have attracted significant attentions as promising alternatives to lithium-ion batteries for large-scale energy storage applications.Here carbon materials are considered as the most competitive anodes for SIBs based on their low-cost,abundant availability and excellent structural stability.Pitch,with high carbon content and low cost,is an ideal raw precursor to prepare carbon materials for large-scale applications.Nevertheless,the microstructures of pitch-based carbon are highly ordered with smaller interlayer distances,which are unfavorable for Na ion storage.Many efforts have been made to improve the sodium storage performance of pitch-based carbon materials.This review summarizes the recent progress about the application of pitch-based carbons for SIBs anodes in the context of carbon’s morphology and structure regulation strategies,including morphology adjustment,heteroatoms doping,fabricating heterostructures,and the increase of the degree of disorder.Besides,the advantages,present challenges,and possible solutions to current issues in pitch-based carbon anode are discussed,with the highlight of future research directions.This review will provide a deep insight into the development of low-cost and high-performance pitch-based carbon anode for SIBs.
基金supported by the National Natural Science Foundation of China(5197219862133007)the Taishan Scholars Program of Shandong Province(tsqn201812002,ts20190908)+1 种基金the Shenzhen Fundamental Research Program(JCYJ20190807093405503)The Natural Science Foundation of Shandong Province(No.ZR2020JQ19)。
文摘Silicon(Si)has been studied as a promising alloying type anode for lithium-ion batteries due to its high specific capacity,low operating potential and abundant resources.Nevertheless,huge volume expansion during alloying/dealloying processes and low electronic conductivity of Si anodes restrict their electrochemical performance.Thus,carbon(C)materials with special physical and chemical properties are applied in Si anodes to effectively solve these problems.This review focuses on current status in the exploration of Si/C anodes,including the lithiation mechanism and solid electrolyte interface formation,various carbon sources in Si/C anodes,such as traditional carbon sources(graphite,pitch,biomass),and novel carbon sources(MXene,graphene,MOFs-derived carbon,graphdiyne,etc.),as well as interfacial bonding modes of Si and C in the Si/C anodes.Finally,we summarize and prospect the selection of carbonaceous materials,structural design and interface control of Si/C anodes,and application of Si/C anodes in all-solid-state lithium-ion batteries and sodium-ion batteries et al.This review will help researchers in the design of novel Si/C anodes for rechargeable batteries.
基金financially supported by the National Natural Science Foundation of China(Nos.21872045 and 21975069)the Key Project of Research and Development Plan of Hunan Province(Grant 2019SK2071)+1 种基金the Natural Science Foundation of Hunan Province(2020JJ4169)support from the Development and Reform Commission of Hunan Province.
文摘Studies have found that oxygen-rich-containing functional groups in carbon-based materials can be used as active sites for the storage performance of K^(+),but the basic storage mechanism is still unclear.Herein,we construct and optimize 3D honeycomb-like carbon grafted with plentiful COOH/C=O functional groups(OFGC)as anodes for potassium ion batteries.The OFGC electrode with steady structure and rich functional groups can effectively contribute to the capacity enhancement and the formation of stable solid electrolyte interphase(SEI)film,achieving a high reversible capacity of 230 mAh g^(-1) at 3000 mA g^(-1) after 10,000 cycles(almost no capacity decay)and an ultra-long cycle time over 18 months at 100 mA g^(-1).The study results revealed the reversible storage mechanism between K^(+)and COOH/C=O functional groups by forming C-O-K compounds.Meanwhile,the in situ electrochemical impedance spectroscopy proved the highly reversible and rapid de/intercalation kinetics of K+in the OFGC electrode,and the growth process of SEI films.In particular,the full cells assembled by Prussian blue cathode exhibit a high energy density of 113 Wh kg^(-1) after 800 cycles(calculated by the total mass of anode and cathode),and get the light-emitting diodes lamp and ear thermometer running.
基金the Norwegian Aluminium Industry, the Norwegian Research Council and the China National Key Fundamental Research Development Project (No.G1999064903)
文摘The anodic over voltage of the carbon anode in aluminumelectrolysis is of the order of 0.6 V at normal current densities.However, it can be reduced somewhat by doping the anode carbon withvarious inorganic compounds. A new apparatus was designed to improvethe precision of over voltage measurements. Anodes were doped withMgAl_2O_4 and AlF_3 both by impregnation of the coke and by addingpowder, and the measured over voltage was compared with that ofUndoped samples. For prebake type anodes baked at around 1150 deg. C,the anodic overvoltage was reduced by 40-60 mV, And for Soderbergtype anodes, baked at 950 deg. C, by 60-80 mV.
文摘The properties and blending recipe of petroleum cokes used to make high quality carbon anodes for aluminium electrolysis were studied. Three kinds of green cokes were selected for bench scale study to illustrate the effects of cokes properties and its blending recipe on anode performances. The results show that impurities derived mainly fi＇om cokes remarkably affect the CO2 reactivity and air reactivity of carbon anodes. Ca, Na and V can increase CO2 reactivity of calcined cokes but S has the contrary effect, and the cokes of high V level generally present high air reactivity. The anodes with good quality can be made by properly selecting and scientifically blending of cokes, some poor quality cokes can also be used to produce high quality anodes with a reasonable blending recipe. Na contaminated anodes have high CO2 reactivity and air reactivity, so the recycled anode butts should be well cleaned to reduce Na content before being introduced into anode production, which is especially important to the low S cokes.
基金supported by the National Key Research and Development Program of China(2021YFB2400200)the National Natural Science Foundation of China(52104313,22172117,52072298)the Scientific Research Program of Shaanxi Provincial Education Department(21JK0808)。
文摘The resourceful and inexpensive red phosphorus has emerged as a promising anode material of potassium-ion batteries(PIBs) for its large theoretical capacities and low redox potentials in the multielectron alloying/dealloying reactions,yet chronically suffering from the huge volume expansion/shrinkage with a sluggish reaction kinetics and an unsatisfactory interfacial stability against volatile electrolytes.Herein,we systematically developed a series of localized high-concentration electrolytes(LHCE) through diluting high-concentration ether electrolytes with a non-solvating fluorinated ether to regulate the formation/evolution of solid electrolyte interphases(SEI) on phosphorus/carbon(P/C) anodes for PIBs.Benefitting from the improved mechanical strength and structural stability of a robust/uniform SEI thin layer derived from a composition-optimized LHCE featured with a unique solvation structure and a superior K+migration capability,the P/C anode with noticeable pseudocapacitive behaviors could achieve a large reversible capacity of 760 mA h g^(-1)at 100 mA g^(-1),a remarkable capacity retention rate of 92.6% over 200 cycles at 800 mA g^(-1),and an exceptional rate capability of 334 mA h g^(-1)at8000 mA g^(-1).Critically,a suppressed reduction of ether solvents with a preferential decomposition of potassium salts in anion-derived interfacial reactions on P/C anode for LHCE could enable a rational construction of an outer organic-rich and inner inorganic-dominant SEI thin film with remarkable mechanical strength/flexibility to buffer huge volume variations and abundant K+diffusion channels to accelerate reaction kinetics.Additionally,the highly reversible/durable full PIBs coupling P/C anodes with annealed organic cathodes further verified an excellent practical applicability of LHCE.This encouraging work on electrolytes regulating SEI formation/evolution would advance the development of P/C anodes for high-performance PIBs.
基金Project(2001AA501433)supported by the National High-Tech Research and Development Program of China
文摘The initial efficiency is a very important criterion for carbon anode material of Li-ion battery.The relationship between initial efficiency and structure parameters of carbon anode material of Li-ion battery was investigated by an artificial intelligence approach called Random Forests using D10,D50,D90,BET specific surface area and TP density as inputs,initial efficiency as output.The results give good classification performance with 91%accuracy.The variable importance analysis results show the impact of 5 variables on the initial efficiency descends in the order of D90,TP density,BET specific surface area,D50 and D10;smaller D90 and larger TP density have positive impact on initial efficiency.The contribution of BET specific surface area on classification is only 18.74%,which indicates the shortcoming of BET specific surface area as a widely used parameter for initial efficiency evaluation.
文摘Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.
基金financially supported by the National Natural Science Foundation of China(22209057)the Guangzhou Basic and Applied Basic Research Foundation(2024A04J0839)。
文摘Carbon-based materials are recognized as anodes fulling of promise for potassium ion batteries(PIBs)due to advantages of affordable cost and high conductivity.However,they still face challenges including structural unstability and slow kinetics.It is difficult to achieve efficient potassium storage with unmodified carbonaceous anode.Herein,atomic bismuth(Bi)sites with different atom coordinations anchored on carbon nanosheets(CNSs)have been synthesized through a template method.The properties of prepared multi-doping carbon anodes Bi-N_(3)S_(1)/CNSs,Bi-N_(3)P_(1)/CNSs and Bi-N_(4)/CNSs were probed in PIBs.The configuration Bi-N_(3)S_(1) with stronger charge asymmetry exhibits superior potassium storage performance compared to Bi-N_(3)P_(1) and Bi-N_(4) configurations.The Bi-N_(3)S_(1)/CNSs display a rate capacity of 129.2 mAh g^(-1)even at 10 A g^(-1)and an impressive cyclability characterized by over 5000 cycles at 5 A g^(-1),on account of its optimal coordination environment with more active Bi centers and K^(+)adsorption sites.Notably,assembled potassium-ion full cell Mg-KVO//Bi-N_(3)S_(1)/CNSs also shows an outstanding cycling stability,enduring 3000 cycles at 2 A g^(-1).Therefore,it can be demonstrated that regulating the electronic structure of metallic centre M-N_(4) via changing the type of ligating atom is a feasible strategy for modifying carbon anodes,on the base of co-doping metal and non-metal.
基金financially supported by the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2022QNRC001)Beijing Nova Program(No.Z211100002121082)+1 种基金Beijing Natural Science Foundation(No.2232081)Anhui Province universities excellent scientific research and innovation team(No.2022AH010024)。
文摘With the swift advancement of renewable energy and escalating demands for energy storage,potassium-ion batteries(PIBs)are increasingly recognized as a potent energy storage techn ology.Various carbon anode materials have been utilized for PIBs anodes owing to their superior K^(+)storage capacity,outstanding cycling performance,elevated capacity,and cost-effectiveness.Therefore,it is imperative to explore and improve carbon anode materials.This review meticulously encapsulates the recent scholarly advancements in carbon anode materials for PIBs.It elucidates the operational mechanisms of carbon anode for PIBs,provides a synopsis of diverse carbon materials,and deliberates on the prevalent challenges,including cycling stability and potassium-ion diffusion rates.Although soft and hard carbon augmented potassiumion capacities,the expansive surface areas coupled with the large ionic radius of K^(+)pose substantial challenges to their structural design and optimization.Consequently,this review outlines strategic approaches to the design of carbon materials for excellent potassium storage performance,including the expansion of interlayer spacing,modification of morphology,heteroatom doping,structural defect regulation,incorporation of porous structures,and development of carbon-carbon composites.Finally,the challenges and prospective solutions of carbon anode materials for PIBs with superior energy density and cycling stability were proposed,providing a reasonable guidance for regulation design of carbon materials.
基金supported by the National Natural Science Foundation of China(Nos.52031008,51874211,21673162,51325102,U22B2071)the International Science and Technology Cooperation Program of China(No.2015DFA90750)the China Postdoctoral Science Foundation(No.2020M682468)。
文摘The corrosion inhibition efficacy of titanate(CaTiO_(3))for carbon anodes in molten salts was investigated through various analytical techniques,including linear sweep voltammetry,X-ray diffraction,scanning electron microscopy,and energy dispersion spectroscopy.The results demonstrate that the addition of CaTiO_(3)corrosion inhibitor efficiently passivates the carbon anode and leads to the formation of a dense CaTiO_(3)layer during the electrolysis process in molten CaCl_(2)-CaO.Subsequently,the passivated carbon anode effectively undergoes the oxygen evolution reaction,with an optimal current density for passivation identified at 400 m A/cm^(2).Comprehensive investigations,including CaTiO_(3)solubility tests in molten CaCl_(2)-CaO and numerical modeling of the stability of complex ionic structures,provide compelling evidence supporting“complexation-precipitation”passivation mechanism.This mechanism involves the initial formation of a complex containing TiO_(2)·nCaO by CaTiO_(3)and CaO,which subsequently decomposes to yield CaTiO_(3),firmly coating the surface of the carbon anode.In practical applications,the integration of CaTiO_(3)corrosion inhibitor with the carbon anode leads to the successful preparation of the FeCoNiCrMn high-entropy alloy without carbon contamination in the molten CaCl_(2)-CaO.
基金funding support from the Fundamental Research Funds for the Central Universities(Grants KY2060000150,GG2060127001,and WK2060000040)support from USTC Center for Micro and Nano-scale Research and Fabrication and NEWARE。
文摘Developing facile and economical strategies to fabricate nitrogen-doped porous carbon anode is desirable for dual-carbon potassium ion hybrid capacitors(PIHCs).Here,a high-concentration edge-nitrogen-doped porous carbon(NPC)anode is synthesized by a template-free strategy,in which the total content of pyrrolic nitrogen and pyridinic nitrogen accounts for more than 80%of the nitrogen atoms.As a result,the NPC anode displays a capacity of 315.4 mA h g^(−1)at a current rate of 0.1 A g^(−1)and 189.1 mA h g^(−1)at 5 A g^(−1).Ex situ characterizations and density functional theory calculations demonstrate the high-concentration edge-nitrogen doping enhances K^(+)adsorption and electronic conductivity of carbon materials,resulting in good electrochemical performance.The assembled NPC//CMK-3 PIHC delivers an energy density of 71.1 W h kg^(−1)at a power density of 771.9 W kg^(−1)over 8,000 cycles.
基金National Key R&D Program of China,Grant/Award Number:2023YFB2503900National Natural Science Foundation of China,Grant/Award Number:12172143Shenzhen Science and Technology Program,Grant/Award Numbers:JCYJ20220818100418040,JCYJ20220530160816038。
文摘Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.
基金Financial support from the National Natural Science Foundation of China (22075320)。
文摘To achieve high energy density in lithium batteries,the construction of lithium-ion/metal hybrid anodes is a promising strategy.In particular,because of the anisotropy of graphite,hybrid anode formed by graphite/Li metal has low transport kinetics and is easy to causes the growth of lithium dendrites and accumulation of dead Li,which seriously affects the cycle life of batteries and even causes safety problems.Here,by comparing graphite with two types of hard carbon,it was found that hybrid anode formed by hard carbon and lithium metal,possessing more disordered mesoporous structure and lithophilic groups,presents better performance.Results indicate that the mesoporous structure provides abundant active site and storage space for dead lithium.With the synergistic effect of this structure and lithophilic functional groups(–COOH),the reversibility of hard carbon/lithium metal hybrid anode is maintained,promoting uniform deposition of lithium metal and alleviating formation of lithium dendrites.The hybrid anode maintains a 99.5%Coulombic efficiency(CE)after 260 cycles at a specific capacity of 500 m Ah/g.This work provides new insights into the hybrid anodes formed by carbon-based materials and lithium metal with high specific energy and fast charging ability.
基金Project (09001232) supported by the Doctoral Foundation of Henan University of Science and Technology,China
文摘Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.
基金the financial supports from the National Natural Science Foundation of China(Grant Nos.51872005,U1508201,52072002)。
文摘Carbonaceous materials have drawn much attention in potassium-ion batteries (PIBs) due to their low price and superior physicochemical properties. However, the application of carbonaceous materials in PIB anodes is hindered by sluggish kinetics and large volume expansion. Herein, N/S co-doped carbon nanocapsule (NSCN) is constructed for superior K+ storage. The NSCN possesses 3D nanocapsule framework with abundant meso/macropores, which guarantees structural robustness and accelerates ions/electrons transportation. The high-level N/S co-doping in carbon matrix not only generates ample defects and active sites for K+ adsorption, but also expands interlayer distance for facile K+ intercalation/deintercalation. As a result, the NSCN electrode delivers a high reversible capacity (408 mAh g^(−1) at 0.05 A g^(−1)), outstanding rate capability (149 mAh g^(−1) at 5 A g^(−1)) and favorable cycle stability (150m Ah g^(−1) at 2 A g^(−1) after 2000 cycles). Ex situ TEM, Raman and XPS measurements demonstrate the excellent stability and reversibility of NSCN electrode during potassiation/depotassiation process. This work provides inspiration for the optimization of energy storage materials by structure and doping engineering.
基金supported by National Postdoctoral Program for Innovative Talents (BX201600192)the National Natural Science Foundation of China (51904342,21673298)+2 种基金China Postdoctoral Science Foundation (2017M6203552)National Key Research and Development Program of China (2017YFB0102000,2018YFB0104200)Hunan Provincial Science and Technology Plan (2017TP1001)。
文摘Carbon-based materials have attracted much interest as one of the promising anodes for sodium-ion batteries. However, low utilization of electrolyte and slow ion-transfer rate during electrochemical process hinder the further application of traditional bulk carbon. In order to enhance the diffusion kinetics and maintain the reversibility, hierarchical hollow carbon microbox was successfully prepared through a tunable bottom-up self-template routine for sodium-ion batteries. During annealing process, the morphology construction and activation happened synchronously. Based on that, a range of cross-linked porous nanosheet and hollow microbox were attained by manipulating reactant condition. The generation of texture and physical property are analyzed and are established linkages related to the electrochemical behavior. As results depicted in kinetic exploration and simulation based on cyclic voltammetry, the surfacecontrolled electrochemical behavior gradually turns to be the diffusion-controlled behavior as the hollow microbox evolves to porous nanosheet. The probable reason is that the rational microstructure/texture design leads to the accelerated diffusion kinetic procedure and the reduced concentration difference polarization. Sodium storage mechanism was deduced as reversible binding of Na-ions with local defects,including vacancies on sp2 graphitic layers, at the edges of flakes and other structural defects instead of intercalation. Bestowed by the morphology design, the broad pore width distribution, abundant defects/active sites and surface functionality, hollow microbox electrode delivers great electrochemical performances. This work is expected to propose a novel and effective strategy to prepare tunable hierarchical hollow carbon microbox and induce the fast kinetic of carbon anode material.
基金financially supported by the Natural Science Foundation projects(No.2020J01287)Guidance Project(No.2020H0024)of Fujian Provincethe Program for Innovative Research Team in Science and Technology in Fujian Province University。
文摘The poor rate capability of battery-type anode is usually the bottleneck of the power-energy outputs of a hybrid alkaline metal ion capacitor.In this work,nitrogen and oxygen co-doped mesoporous carbon spheres with excellent rate performance and cycle stability are used as anode materials of sodium ion capacitors(SICs).The high N and O element doping levels as well as the amorphous and mesoporous structure have enabled prominent capacitive Na ion storage behavior,which in turn match well with the capacitive cathode in the hybrid device.Under optimum conditions,the SIC delivers a high energy density of 103.1 Wh kg^(-1)at a power density of 205.6 W kg^(-1).Even at a high power density of 7520 W kg^(-1),an energy density of 23.5 Wh kg^(-1)is still maintained.Moreover,a robust cycle stability with capacity retention of 84.6%after 2500 cycles at 1 A g^(-1)is maintained.Such excellent electrochemical performances convincingly demonstrate that the all-carbon based SICs with the highly capacitive N and O co-doped mesoporous carbon anode can be promising Na ion-based energy storage devices alternative to their Li ion-based counterparts.
