On September 27,the world's first environmentally friendly 82,000-ton hulk carrier(DOLPHIN 82)"Shandong Xinsheng",tailor-made by SDARI for Shandong Shipping and built by Jiangsu Xinhantong Shipbuilding I...On September 27,the world's first environmentally friendly 82,000-ton hulk carrier(DOLPHIN 82)"Shandong Xinsheng",tailor-made by SDARI for Shandong Shipping and built by Jiangsu Xinhantong Shipbuilding Industry Co.,Ltd.,was officially named and delivered.Its successful delivery indicates China has taken a key step towards industrialization in the field of ship carbon capture,providing a new solution for achieving energy conservation and emission reduction goals.展开更多
Present industrial decarbonization technologies require an active CO_(2)-concentration system,often based on lime reaction or amine binding reactions,which is energy intensive and carries a high CO_(2)-footprint.Here ...Present industrial decarbonization technologies require an active CO_(2)-concentration system,often based on lime reaction or amine binding reactions,which is energy intensive and carries a high CO_(2)-footprint.Here instead,an effective process without active CO_(2)concentration is demonstrated in a new process-termed IC2CNT(Insulationdiffusion facilitated CO_(2) to Carbon Nanomaterial Technology)decarbonization process.Molten carbonates such as Li_(2)CO_(3)(mp 723℃)are highly insoluble to industrial feed gas principal components(N2,O_(2),and H2O).However,CO_(2) can readily dissolve and react in molten carbonates.We have recently characterized high CO_(2) diffusion rates through porous aluminosilicate and calcium-magnesium silicate thermal insulations.Here,the CO_(2) in ambient feed gas passes through these membranes into molten Li_(2)CO_(3).The membrane also concurrently insulates the feed gas from the hot molten carbonate chamber,obviating the need to heat the(non-CO_(2))majority of the feed gas to high temperature.In this insulation facilitated decarbonization process CO_(2)is split by electrolysis in the molten carbonate producing sequestered,high-purity carbon nanomaterials(such as CNTs)and O_(2).展开更多
CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voir...CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.展开更多
The objective of this study is to propose an optimal plant design for blue hydrogen production aboard a liquefiednatural gas(LNG)carrier.This investigation focuses on integrating two distinct processes—steam methaner...The objective of this study is to propose an optimal plant design for blue hydrogen production aboard a liquefiednatural gas(LNG)carrier.This investigation focuses on integrating two distinct processes—steam methanereforming(SMR)and ship-based carbon capture(SBCC).The first refers to the common practice used to obtainhydrogen from methane(often derived from natural gas),where steam reacts with methane to produce hydrogenand carbon dioxide(CO_(2)).The second refers to capturing the CO_(2) generated during the SMR process on boardships.By capturing and storing the carbon emissions,the process significantly reduces its environmental impact,making the hydrogen production“blue,”as opposed to“grey”(which involves CO_(2) emissions without capture).For the SMR process,the analysis reveals that increasing the reformer temperature enhances both the processperformance and CO_(2) emissions.Conversely,a higher steam-to-carbon(s/c)ratio reduces hydrogen yield,therebydecreasing thermal efficiency.The study also shows that preheating the air and boil-off gas(BOG)before theyenter the combustion chamber boosts overall efficiency and curtails CO_(2) emissions.In the SBCC process,puremonoethanolamine(MEA)is employed to capture the CO_(2) generated by the exhaust gases from the SMR process.The results indicate that with a 90%CO_(2) capture rate,the associated heat consumption amounts to 4.6 MJ perkilogram of CO_(2) captured.This combined approach offers a viable pathway to produce blue hydrogen on LNGcarriers while significantly reducing the carbon footprint.展开更多
The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace K...The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace KOH-catalyzed CO_(2) activation.Comprehensive investigations were conducted on three aspects:physicochemical structure evolution of biochar,mechanistic understanding of trace KOH-facilitated CO_(2) activation processes,and application characteristics for CO_(2) adsorption.Results demonstrate that biochar activated by trace KOH(<10%)and CO_(2) achieves comparable specific surface area(1244.09 m^(2)/g)to that obtained with 100%KOH activation(1425.10 m^(2)/g).The pore structure characteristics(specific surface area and pore volume)are governed by CO and CH4 generated through K-salt catalyzed reactions between CO_(2) and biochar.The optimal CO_(2) adsorption capacities of KBC adsorbent reached 4.70 mmol/g(0℃)and 7.25 mmol/g(25℃),representing the maximum values among comparable carbon adsorbents.The 5%KBC-CO_(2) sample exhibited CO_(2) adsorption capacities of 3.19 and 5.01 mmol/g under respective conditions,attaining current average performance levels.Notably,CO_(2)/N_(2) selectivity(85∶15,volume ratio)reached 64.71 at 0.02 bar with robust cycling stability.Molecular dynamics simulations revealed that oxygen-containing functional groups accelerate CO_(2) adsorption kinetics and enhance micropore storage capacity.This technical route offers simplicity,environmental compatibility,and scalability,providing critical references for large-scale preparation of high-quality carbon materials.展开更多
The removal of bisphenol A (BPA) in seawater using microalgae is still a challenge due to the low removal efficiency and weak tolerance. A novel Oocystis algal strain was isolated for BPA removal with an efficiency (&...The removal of bisphenol A (BPA) in seawater using microalgae is still a challenge due to the low removal efficiency and weak tolerance. A novel Oocystis algal strain was isolated for BPA removal with an efficiency (> 98%) over two times higher than that of the common microalgae Chlorella (42.8%). The maximal carbon capture rate of Oocystis was 0.16 g/(L·d) which was much higher than that of Chlorella (0.06 g/(L·d)). The BPA removal fitted a first-order kinetic model and Oocystis showed a maximum removal rate of 29.80 µg/(L·d) at a BPA concentration of 2000 µg/L. The new Oocystis strain had a wide range of pH adaptability for BPA removal. The sharp increase in peroxidase (POD) activity indicated its involvement in BPA degradation. Transcriptome analysis showed that BPA mainly affected the photosynthesis-related genes while the engagement of glutathione POD in the BPA biodegradation was confirmed. BPA could also serve as growth promoter for Oocystis during the removal process, which subsequently enhanced the growth and carbon capture. BPA could be removed by the Oocystis strain through hydroxylation, demethylation, and conjugation. The Oocystis strain still maintained high BPA removal efficiency (100%) and carbon capture rate (0.2 g/(L·d)) in the pilot-scale tailwater treatment system, illustrating microalgal processes were efficient for marine pollution control. This study also provides new ideas for developing low-cost carbon capture technologies to achieve the goal of carbon neutrality.展开更多
Global climate change has become one of the most pressing challenges of the 21st century.As anthropogenic CO_(2) emissions from fossil fuel consumption and industrial processes continue to disrupt Earth’s carbon cycl...Global climate change has become one of the most pressing challenges of the 21st century.As anthropogenic CO_(2) emissions from fossil fuel consumption and industrial processes continue to disrupt Earth’s carbon cycle,atmospheric CO_(2) concentrations have reached unprecedented levels-exceeding 420 parts per million(ppm)in 2023 compared to pre-industrial 280 ppm.This rapid accumulation of greenhouse gases has resulted in measurable con-sequences including rising global temperatures,ocean acidifica-tion,and increased frequency of extreme weather events.展开更多
In order to promote the utilization level of new energy resources for local and efficient consumption,this paper introduces the biogas(BG)fermentation technology into the integrated energy system(IES).This initiative ...In order to promote the utilization level of new energy resources for local and efficient consumption,this paper introduces the biogas(BG)fermentation technology into the integrated energy system(IES).This initiative is to study the collaborative and optimal scheduling of IES with wind power(WP),photovoltaic(PV),and BG,while integrating carbon capture system(CCS)and power-to-gas(P2G)system.Firstly,the framework of collaborative operation of IES for BG-CCS-P2G is constructed.Secondly,the flexible scheduling resources of the source and load sides are fully exploited,and the collaborative operation mode of CCS-P2G is proposed to establish a model of IES with WP,PV,and BG multi-energy flow coupling.Then,with the objective of minimizing the intra-day operating cost and the constraints of system energy balance and equipment operating limits,the IES withWP,PV,and BG collaborative optimal scheduling model is established.Finally,taking into account the uncertainty of the output of WP and PV generation,the proposed optimal scheduling model is solved by CPLEX,and its validity is verified by setting several scenarios.The results show that the proposed collaborative operation mode and optimal scheduling model can realize the efficient,low-carbon,and economic operation of the IES with WP,PV,and BG and significantly enhance the utilization of new energy for local consumption.展开更多
Since the Industrial Revolution,humanity’s extensive burning of fossil fuels(coal,oil,and natural gas)has led to a continuous rise in the concentration of greenhouse gases,such as carbon dioxide(CO_(2)),in the atmosp...Since the Industrial Revolution,humanity’s extensive burning of fossil fuels(coal,oil,and natural gas)has led to a continuous rise in the concentration of greenhouse gases,such as carbon dioxide(CO_(2)),in the atmosphere.According to data from the World Meteorological Organization(WMO),the global average CO_(2) concentration in 2023 exceeded 420×10^(−6),reaching the highest level in the past 800000 years.This has led to the increasing frequency of extreme climate events-such as glacier melting,sea-level rise,heatwaves,droughts,floods,and hurricanes-posing a severe threat to ecosystems and human society.展开更多
The International Maritime Organization(IMO)aims to reduce shipping greenhouse gas emissions by 70%by 2050,positioning onboard carbon capture(OCC)systems as essential tools,with chemical absorption being particularly ...The International Maritime Organization(IMO)aims to reduce shipping greenhouse gas emissions by 70%by 2050,positioning onboard carbon capture(OCC)systems as essential tools,with chemical absorption being particularly favorable due to its retrofit viability.This review analyzes advancements in chemical absorption technologies specific to shipborne applications,focusing on absorbent development,absorption tower optimization,and system integration.This article begins with an overview of OCC principles and advantages,followed by a discussion of technological progress,including feasibility studies and project outcomes.It explores various chemical absorbents,assessing performance,degradation,and emissions.The structural configurations of absorption towers and their modeling techniques are examined,alongside challenges such as limited vessel space,energy constraints,and gas-liquid distribution inefficiencies.Future directions emphasize the need for innovative absorbent designs,advanced simulation for tower optimization,and enhanced integration with ship energy systems,including renewable energy and waste heat recovery.The potential for intelligent technologies to enable real-time monitoring and automated management of carbon capture systems is highlighted.Finally,further investigations into fundamental interfaces and reaction kinetics are essential for advancing shipborne carbon capture technologies,providing a crucial reference for researchers and practitioners in the field.展开更多
Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrati...Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrating dual benefits of enhanced energy production and carbon reduction.This study comprehensively described the key influencing factors governing CO_(2)-EOR and geological storage and systematically analyzed reservoir properties,fluid characteristics,and operational parameters.The mech-anisms of these parameters on EOR versus CO_(2) storage performance were investigated throughout CCUS-EOR processes.This paper proposes a coupled two-stage CCUS-EOR process:CO_(2)-EOR storage stage and long-term CO_(2) storage stage after the CO_(2) injection phase is completed.In each stage,the main control factors impacting the CO_(2)-EOR and storage stages are screened and coupled with rigorous technical anal-ysis.The key factors here are reservoir properties,fluid characteristics,and operational parameter.A novel CCUS-EOR synergistic method was proposed to optimize the lifecycle performance of dual objective of EOR and storage.Furthermore,based on multi-objective optimization,considering the lifecycle,a multi-scale techno-economic evaluation method was proposed to fully assess the CCUS-EOR project per-formance.Finally,a set of recommendations for advancing CCUS-EOR technologies by deploying multi-factor/multi-field coupling methodologies,novel green intelligent injection materials,and artificial intel-ligence/machine learning technologies were visited.展开更多
In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increas...In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increased attention toward carbon capture,utilization,and storage strategies.Among these strategies,monodisperse microcapsules,produced by using droplet microfluidics,have emerged as promising tools for carbon capture,offering a potential solution to mitigate CO_(2) emissions.However,the limited yield of microcapsules due to the inherent low flow rate in droplet microfluidics remains a challenge.In this comprehensive review,the high-throughput production of carbon capture microcapsules using droplet microfluidics is focused on.Specifically,the detailed insights into microfluidic chip fabrication technologies,the microfluidic generation of emulsion droplets,along with the associated hydrodynamic considerations,and the generation of carbon capture microcapsules through droplet microfluidics are provided.This review highlights the substantial potential of droplet microfluidics as a promising technique for large-scale carbon capture microcapsule production,which could play a significant role in achieving carbon neutralization and emission reduction goals.展开更多
Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers...Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.展开更多
To ensure project safety and secure public support, an integrated and comprehensive monitoring program is needed within a carbon capture and storage(CCS) project. Monitoring can be done using many well-established tec...To ensure project safety and secure public support, an integrated and comprehensive monitoring program is needed within a carbon capture and storage(CCS) project. Monitoring can be done using many well-established techniques from various fields, and the seismic method proves to be the crucial one. This method is widely used to determine the CO_(2) distribution, image the plume development, and quantitatively estimate the concentration. Because both the CO_(2) distribution and the potential migration pathway can be spatially small scale, high resolution for seismic imaging is demanded. However, obtaining a high-resolution image of a subsurface structure in marine settings is difficult. Herein, we introduce the novel Hcable(Harrow-like cable system) technique, which may be applied to offshore CCS monitoring. This technique uses a highfrequency source(the dominant frequency>100 Hz) to generate seismic waves and a combination of a long cable and several short streamers to receive seismic waves. Ultrahigh-frequency seismic images are achieved through the processing of Hcable seismic data. Hcable is then applied in a case study to demonstrate its detailed characterization for small-scale structures. This work reveals that Hcable is a promising tool for timelapse seismic monitoring of oceanic CCS.展开更多
Carbon capture,utilization and storage(CCUS)technology is an important means to effectively reduce carbon emissions from fossil energy combustion and industrial processes.With the crisis of climate change,CCUS has att...Carbon capture,utilization and storage(CCUS)technology is an important means to effectively reduce carbon emissions from fossil energy combustion and industrial processes.With the crisis of climate change,CCUS has attracted increasing attention in the world.CCUS technology as developed rapidly in China is technically feasible for large-scale application in various industries.The R&D and demonstration of CCUS in China Petroleum&Chemical Corporation(Sinopec)are summarized,including carbon capture,carbon transport,CO_(2)enhanced energy recovery(including oil,gas,and water,etc.),and comprehensive utilization of CO_(2).Based on the source-sink matching characteristics in China,two CCUS industrialization scenarios are proposed,namely,CO_(2)-EOR,CO_(2)-driven enhanced oil recovery using centralized carbon sinks in East China and CO_(2)-EWR,CO_(2)-driven enhanced water recovery(EWR)using centralized carbon sources from the coal chemical industry in West China.Finally,a CCUS industrialization path from Sinopec's perspective is suggested,using CO_(2)-EOR as the major means and CO_(2)-EWR,CO_(2)-driven enhanced gas recovery(CO_(2)-EGR)and other utilization methods as important supplementary means.展开更多
Several Organization of Arab Petroleum Exporting Countries (OAPEC) member states (OMSs) have updated their nationally determined contributions (NDCs) with the aim of achieving zero carbon emissions by 2050. Carbon neu...Several Organization of Arab Petroleum Exporting Countries (OAPEC) member states (OMSs) have updated their nationally determined contributions (NDCs) with the aim of achieving zero carbon emissions by 2050. Carbon neutrality requires shifting from a linear carbon economy (LCE) to a circular carbon economy (CCE). Carbon capture and storage (CCS) technologies, including reduction, recycle, reuse, removal, and storage technologies, represent an important strategy for achieving such a shift. Herein, we investigate the effects of CCS technology adoption in six OMSs—namely the Kingdom of Saudi Arabia (KSA), Qatar, the United Arab Emirates (UAE), Kuwait, Algeria, and Iraq—by examining their Circular Carbon Economy Index (CCEI) scores, which reflect compliance with CCE-transition policies. Total CCEI, current performance CCEI dimension, and future enabler CCEI dimensions scores were compared among the aforementioned six OMSs and relative to Norway, which was used as a global-high CCEI reference standard. Specifically, CCEI general scope and CCEI oil scope dimension scores were compared. The KSA, Qatar, the UAE, and Kuwait had higher CCEI scores than Algeria and Iraq, reflecting their greater adoption of CCE-transition policies and greater emission-reducing modernization investments. The current performance CCEI scores of Algeria and Iraq appear to be buttressed to some extent by their greater natural carbon sink resources. Based on the findings, we recommend specific actions for OMSs to enhance their CCE transitions and mitigate the negative impacts associated with the associated investments, including: taking rapid practical steps to eliminate carbon oil industry emissions;detailed CCS planning by national oil companies;international cooperation and coordination;and increased investment in domestic CCS utilization infrastructure.展开更多
Carbon dioxide(CO_(2))is the primary greenhouse gas contributing to anthropogenic climate change which is associated with human activities.The majority of CO_(2) emissions are results of the burning of fossil fuels fo...Carbon dioxide(CO_(2))is the primary greenhouse gas contributing to anthropogenic climate change which is associated with human activities.The majority of CO_(2) emissions are results of the burning of fossil fuels for energy,as well as industrial processes such as steel and cement production.Carbon capture,utilization,and storage(CCUS)is a sustainable technology promising in terms of reducing CO_(2) emissions that would otherwise contribute to climate change.From this perspective,the discussion on carbon capture focuses on chemical absorption technology,primarily due to its commercialization potential.The CO_(2) absorptive capacity and absorption rate of various chemical solvents have been summarized.The carbon utilization focuses on electrochemical conversion routes converting CO_(2) into potentially valuable chemicals which have received particular attention in recent years.The Faradaic conversion efficiencies for various CO_(2) reduction products are used to describe efficiency improvements.For carbon storage,successful deployment relies on a better understanding of fluid mechanics,geomechanics,and reactive transport,which are discussed in details.展开更多
The Alkaline Thermal Treatment(ATT)of biomass is one of the few biomass conversion processes that has a potential for BECCS(bio-energy with carbon capture and storage).Combining in-situ carbon capture withcreates a ca...The Alkaline Thermal Treatment(ATT)of biomass is one of the few biomass conversion processes that has a potential for BECCS(bio-energy with carbon capture and storage).Combining in-situ carbon capture withcreates a carbon-neutral process that has the potential to be carbon-negative.This study has shown that the conversion of cellulose tosuppressedcan be achieved through the reforming of gaseous intermediates in a fixed bed of 10%Ni/ZrO2.Reforming occurs at low temperatures≤773 K,which could allow for improved sustainability.展开更多
Investigating the immobilization of CO2,previous basalt-water-CO2 interaction studies revealed the formation of carbonates over a short period,but with the extensive formation of secondary silicates(SS).The mechanisms...Investigating the immobilization of CO2,previous basalt-water-CO2 interaction studies revealed the formation of carbonates over a short period,but with the extensive formation of secondary silicates(SS).The mechanisms involved in these processes remain unresolved,so the present study was undertaken to understand secondary mineral formation mechanisms.XRPD and Rietveld refinement data for neo-formed minerals show a drastic decrease in the Ca-O bond length,with the calcite structure degenerating after 80 h(hours).However,SEM images and EDS data revealed that a longer interaction time resulted in the formation of chlorite and smectite,adjacent to basalt grains which prevent basaltwater-CO2 interaction to form carbonates,thus restricting carbonate formation.As a result of this,the CO2 mineralization rate is initially high(till 80 h),but it later reduces drastically.It is evident that,for such temperature-controlled transformations,low temperature is conducive to minimizing SS surface coating at the time of mineral carbonation.展开更多
The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determin...The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.展开更多
文摘On September 27,the world's first environmentally friendly 82,000-ton hulk carrier(DOLPHIN 82)"Shandong Xinsheng",tailor-made by SDARI for Shandong Shipping and built by Jiangsu Xinhantong Shipbuilding Industry Co.,Ltd.,was officially named and delivered.Its successful delivery indicates China has taken a key step towards industrialization in the field of ship carbon capture,providing a new solution for achieving energy conservation and emission reduction goals.
文摘Present industrial decarbonization technologies require an active CO_(2)-concentration system,often based on lime reaction or amine binding reactions,which is energy intensive and carries a high CO_(2)-footprint.Here instead,an effective process without active CO_(2)concentration is demonstrated in a new process-termed IC2CNT(Insulationdiffusion facilitated CO_(2) to Carbon Nanomaterial Technology)decarbonization process.Molten carbonates such as Li_(2)CO_(3)(mp 723℃)are highly insoluble to industrial feed gas principal components(N2,O_(2),and H2O).However,CO_(2) can readily dissolve and react in molten carbonates.We have recently characterized high CO_(2) diffusion rates through porous aluminosilicate and calcium-magnesium silicate thermal insulations.Here,the CO_(2) in ambient feed gas passes through these membranes into molten Li_(2)CO_(3).The membrane also concurrently insulates the feed gas from the hot molten carbonate chamber,obviating the need to heat the(non-CO_(2))majority of the feed gas to high temperature.In this insulation facilitated decarbonization process CO_(2)is split by electrolysis in the molten carbonate producing sequestered,high-purity carbon nanomaterials(such as CNTs)and O_(2).
基金Lin Du acknowledges the financial support provided by China Scholarship Council(CSC)via a Ph.D.Scholarship(202008510128)supported by Core Technology Project of China National Petroleum Corporation(CNPC)"Research on Thermal Miscible Flooding Technology"(2023ZG18)。
文摘CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.
文摘The objective of this study is to propose an optimal plant design for blue hydrogen production aboard a liquefiednatural gas(LNG)carrier.This investigation focuses on integrating two distinct processes—steam methanereforming(SMR)and ship-based carbon capture(SBCC).The first refers to the common practice used to obtainhydrogen from methane(often derived from natural gas),where steam reacts with methane to produce hydrogenand carbon dioxide(CO_(2)).The second refers to capturing the CO_(2) generated during the SMR process on boardships.By capturing and storing the carbon emissions,the process significantly reduces its environmental impact,making the hydrogen production“blue,”as opposed to“grey”(which involves CO_(2) emissions without capture).For the SMR process,the analysis reveals that increasing the reformer temperature enhances both the processperformance and CO_(2) emissions.Conversely,a higher steam-to-carbon(s/c)ratio reduces hydrogen yield,therebydecreasing thermal efficiency.The study also shows that preheating the air and boil-off gas(BOG)before theyenter the combustion chamber boosts overall efficiency and curtails CO_(2) emissions.In the SBCC process,puremonoethanolamine(MEA)is employed to capture the CO_(2) generated by the exhaust gases from the SMR process.The results indicate that with a 90%CO_(2) capture rate,the associated heat consumption amounts to 4.6 MJ perkilogram of CO_(2) captured.This combined approach offers a viable pathway to produce blue hydrogen on LNGcarriers while significantly reducing the carbon footprint.
基金supported by the National Natural Science Foundation of China(52376103,542B2081).
文摘The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace KOH-catalyzed CO_(2) activation.Comprehensive investigations were conducted on three aspects:physicochemical structure evolution of biochar,mechanistic understanding of trace KOH-facilitated CO_(2) activation processes,and application characteristics for CO_(2) adsorption.Results demonstrate that biochar activated by trace KOH(<10%)and CO_(2) achieves comparable specific surface area(1244.09 m^(2)/g)to that obtained with 100%KOH activation(1425.10 m^(2)/g).The pore structure characteristics(specific surface area and pore volume)are governed by CO and CH4 generated through K-salt catalyzed reactions between CO_(2) and biochar.The optimal CO_(2) adsorption capacities of KBC adsorbent reached 4.70 mmol/g(0℃)and 7.25 mmol/g(25℃),representing the maximum values among comparable carbon adsorbents.The 5%KBC-CO_(2) sample exhibited CO_(2) adsorption capacities of 3.19 and 5.01 mmol/g under respective conditions,attaining current average performance levels.Notably,CO_(2)/N_(2) selectivity(85∶15,volume ratio)reached 64.71 at 0.02 bar with robust cycling stability.Molecular dynamics simulations revealed that oxygen-containing functional groups accelerate CO_(2) adsorption kinetics and enhance micropore storage capacity.This technical route offers simplicity,environmental compatibility,and scalability,providing critical references for large-scale preparation of high-quality carbon materials.
基金supported by the National Natural Science Foundation of China(No.42277037)the National Key R&D Program of China(Nos.2023YFD2400405 and 2023YFD2400400)+1 种基金the Taishan Scholars Program(No.tstp20240522)the Ocean Negative Carbon Emissions(ONCE)Program,and Fundamental Research Funds for the Central Universities(No.3072025YC2701).
文摘The removal of bisphenol A (BPA) in seawater using microalgae is still a challenge due to the low removal efficiency and weak tolerance. A novel Oocystis algal strain was isolated for BPA removal with an efficiency (> 98%) over two times higher than that of the common microalgae Chlorella (42.8%). The maximal carbon capture rate of Oocystis was 0.16 g/(L·d) which was much higher than that of Chlorella (0.06 g/(L·d)). The BPA removal fitted a first-order kinetic model and Oocystis showed a maximum removal rate of 29.80 µg/(L·d) at a BPA concentration of 2000 µg/L. The new Oocystis strain had a wide range of pH adaptability for BPA removal. The sharp increase in peroxidase (POD) activity indicated its involvement in BPA degradation. Transcriptome analysis showed that BPA mainly affected the photosynthesis-related genes while the engagement of glutathione POD in the BPA biodegradation was confirmed. BPA could also serve as growth promoter for Oocystis during the removal process, which subsequently enhanced the growth and carbon capture. BPA could be removed by the Oocystis strain through hydroxylation, demethylation, and conjugation. The Oocystis strain still maintained high BPA removal efficiency (100%) and carbon capture rate (0.2 g/(L·d)) in the pilot-scale tailwater treatment system, illustrating microalgal processes were efficient for marine pollution control. This study also provides new ideas for developing low-cost carbon capture technologies to achieve the goal of carbon neutrality.
文摘Global climate change has become one of the most pressing challenges of the 21st century.As anthropogenic CO_(2) emissions from fossil fuel consumption and industrial processes continue to disrupt Earth’s carbon cycle,atmospheric CO_(2) concentrations have reached unprecedented levels-exceeding 420 parts per million(ppm)in 2023 compared to pre-industrial 280 ppm.This rapid accumulation of greenhouse gases has resulted in measurable con-sequences including rising global temperatures,ocean acidifica-tion,and increased frequency of extreme weather events.
文摘In order to promote the utilization level of new energy resources for local and efficient consumption,this paper introduces the biogas(BG)fermentation technology into the integrated energy system(IES).This initiative is to study the collaborative and optimal scheduling of IES with wind power(WP),photovoltaic(PV),and BG,while integrating carbon capture system(CCS)and power-to-gas(P2G)system.Firstly,the framework of collaborative operation of IES for BG-CCS-P2G is constructed.Secondly,the flexible scheduling resources of the source and load sides are fully exploited,and the collaborative operation mode of CCS-P2G is proposed to establish a model of IES with WP,PV,and BG multi-energy flow coupling.Then,with the objective of minimizing the intra-day operating cost and the constraints of system energy balance and equipment operating limits,the IES withWP,PV,and BG collaborative optimal scheduling model is established.Finally,taking into account the uncertainty of the output of WP and PV generation,the proposed optimal scheduling model is solved by CPLEX,and its validity is verified by setting several scenarios.The results show that the proposed collaborative operation mode and optimal scheduling model can realize the efficient,low-carbon,and economic operation of the IES with WP,PV,and BG and significantly enhance the utilization of new energy for local consumption.
文摘Since the Industrial Revolution,humanity’s extensive burning of fossil fuels(coal,oil,and natural gas)has led to a continuous rise in the concentration of greenhouse gases,such as carbon dioxide(CO_(2)),in the atmosphere.According to data from the World Meteorological Organization(WMO),the global average CO_(2) concentration in 2023 exceeded 420×10^(−6),reaching the highest level in the past 800000 years.This has led to the increasing frequency of extreme climate events-such as glacier melting,sea-level rise,heatwaves,droughts,floods,and hurricanes-posing a severe threat to ecosystems and human society.
基金supported by the National Natural Science Foundation of China(51876118)。
文摘The International Maritime Organization(IMO)aims to reduce shipping greenhouse gas emissions by 70%by 2050,positioning onboard carbon capture(OCC)systems as essential tools,with chemical absorption being particularly favorable due to its retrofit viability.This review analyzes advancements in chemical absorption technologies specific to shipborne applications,focusing on absorbent development,absorption tower optimization,and system integration.This article begins with an overview of OCC principles and advantages,followed by a discussion of technological progress,including feasibility studies and project outcomes.It explores various chemical absorbents,assessing performance,degradation,and emissions.The structural configurations of absorption towers and their modeling techniques are examined,alongside challenges such as limited vessel space,energy constraints,and gas-liquid distribution inefficiencies.Future directions emphasize the need for innovative absorbent designs,advanced simulation for tower optimization,and enhanced integration with ship energy systems,including renewable energy and waste heat recovery.The potential for intelligent technologies to enable real-time monitoring and automated management of carbon capture systems is highlighted.Finally,further investigations into fundamental interfaces and reaction kinetics are essential for advancing shipborne carbon capture technologies,providing a crucial reference for researchers and practitioners in the field.
基金the financial support from the National Key Research and Development Program of China(2022YFE0206700)the Science Foundation of China University of Petroleum,Beijing(2462021YJRC012).
文摘Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrating dual benefits of enhanced energy production and carbon reduction.This study comprehensively described the key influencing factors governing CO_(2)-EOR and geological storage and systematically analyzed reservoir properties,fluid characteristics,and operational parameters.The mech-anisms of these parameters on EOR versus CO_(2) storage performance were investigated throughout CCUS-EOR processes.This paper proposes a coupled two-stage CCUS-EOR process:CO_(2)-EOR storage stage and long-term CO_(2) storage stage after the CO_(2) injection phase is completed.In each stage,the main control factors impacting the CO_(2)-EOR and storage stages are screened and coupled with rigorous technical anal-ysis.The key factors here are reservoir properties,fluid characteristics,and operational parameter.A novel CCUS-EOR synergistic method was proposed to optimize the lifecycle performance of dual objective of EOR and storage.Furthermore,based on multi-objective optimization,considering the lifecycle,a multi-scale techno-economic evaluation method was proposed to fully assess the CCUS-EOR project per-formance.Finally,a set of recommendations for advancing CCUS-EOR technologies by deploying multi-factor/multi-field coupling methodologies,novel green intelligent injection materials,and artificial intel-ligence/machine learning technologies were visited.
基金supported by the National Natural Science Foundation of China (No.52036006)。
文摘In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increased attention toward carbon capture,utilization,and storage strategies.Among these strategies,monodisperse microcapsules,produced by using droplet microfluidics,have emerged as promising tools for carbon capture,offering a potential solution to mitigate CO_(2) emissions.However,the limited yield of microcapsules due to the inherent low flow rate in droplet microfluidics remains a challenge.In this comprehensive review,the high-throughput production of carbon capture microcapsules using droplet microfluidics is focused on.Specifically,the detailed insights into microfluidic chip fabrication technologies,the microfluidic generation of emulsion droplets,along with the associated hydrodynamic considerations,and the generation of carbon capture microcapsules through droplet microfluidics are provided.This review highlights the substantial potential of droplet microfluidics as a promising technique for large-scale carbon capture microcapsule production,which could play a significant role in achieving carbon neutralization and emission reduction goals.
基金support from the U.S.Department of Energy National Energy Technology Laboratory(DE-FE0031736)the New York State Foundation for Science,Technology and Innovation(NYSTAR).
文摘Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.
基金Supported by the project of Sanya Yazhou Bay Science and Technology City (Grant No:SCKJ-JYRC-2022-14)。
文摘To ensure project safety and secure public support, an integrated and comprehensive monitoring program is needed within a carbon capture and storage(CCS) project. Monitoring can be done using many well-established techniques from various fields, and the seismic method proves to be the crucial one. This method is widely used to determine the CO_(2) distribution, image the plume development, and quantitatively estimate the concentration. Because both the CO_(2) distribution and the potential migration pathway can be spatially small scale, high resolution for seismic imaging is demanded. However, obtaining a high-resolution image of a subsurface structure in marine settings is difficult. Herein, we introduce the novel Hcable(Harrow-like cable system) technique, which may be applied to offshore CCS monitoring. This technique uses a highfrequency source(the dominant frequency>100 Hz) to generate seismic waves and a combination of a long cable and several short streamers to receive seismic waves. Ultrahigh-frequency seismic images are achieved through the processing of Hcable seismic data. Hcable is then applied in a case study to demonstrate its detailed characterization for small-scale structures. This work reveals that Hcable is a promising tool for timelapse seismic monitoring of oceanic CCS.
文摘Carbon capture,utilization and storage(CCUS)technology is an important means to effectively reduce carbon emissions from fossil energy combustion and industrial processes.With the crisis of climate change,CCUS has attracted increasing attention in the world.CCUS technology as developed rapidly in China is technically feasible for large-scale application in various industries.The R&D and demonstration of CCUS in China Petroleum&Chemical Corporation(Sinopec)are summarized,including carbon capture,carbon transport,CO_(2)enhanced energy recovery(including oil,gas,and water,etc.),and comprehensive utilization of CO_(2).Based on the source-sink matching characteristics in China,two CCUS industrialization scenarios are proposed,namely,CO_(2)-EOR,CO_(2)-driven enhanced oil recovery using centralized carbon sinks in East China and CO_(2)-EWR,CO_(2)-driven enhanced water recovery(EWR)using centralized carbon sources from the coal chemical industry in West China.Finally,a CCUS industrialization path from Sinopec's perspective is suggested,using CO_(2)-EOR as the major means and CO_(2)-EWR,CO_(2)-driven enhanced gas recovery(CO_(2)-EGR)and other utilization methods as important supplementary means.
文摘Several Organization of Arab Petroleum Exporting Countries (OAPEC) member states (OMSs) have updated their nationally determined contributions (NDCs) with the aim of achieving zero carbon emissions by 2050. Carbon neutrality requires shifting from a linear carbon economy (LCE) to a circular carbon economy (CCE). Carbon capture and storage (CCS) technologies, including reduction, recycle, reuse, removal, and storage technologies, represent an important strategy for achieving such a shift. Herein, we investigate the effects of CCS technology adoption in six OMSs—namely the Kingdom of Saudi Arabia (KSA), Qatar, the United Arab Emirates (UAE), Kuwait, Algeria, and Iraq—by examining their Circular Carbon Economy Index (CCEI) scores, which reflect compliance with CCE-transition policies. Total CCEI, current performance CCEI dimension, and future enabler CCEI dimensions scores were compared among the aforementioned six OMSs and relative to Norway, which was used as a global-high CCEI reference standard. Specifically, CCEI general scope and CCEI oil scope dimension scores were compared. The KSA, Qatar, the UAE, and Kuwait had higher CCEI scores than Algeria and Iraq, reflecting their greater adoption of CCE-transition policies and greater emission-reducing modernization investments. The current performance CCEI scores of Algeria and Iraq appear to be buttressed to some extent by their greater natural carbon sink resources. Based on the findings, we recommend specific actions for OMSs to enhance their CCE transitions and mitigate the negative impacts associated with the associated investments, including: taking rapid practical steps to eliminate carbon oil industry emissions;detailed CCS planning by national oil companies;international cooperation and coordination;and increased investment in domestic CCS utilization infrastructure.
基金the National Natural Science Foun-dation of China(51836006).
文摘Carbon dioxide(CO_(2))is the primary greenhouse gas contributing to anthropogenic climate change which is associated with human activities.The majority of CO_(2) emissions are results of the burning of fossil fuels for energy,as well as industrial processes such as steel and cement production.Carbon capture,utilization,and storage(CCUS)is a sustainable technology promising in terms of reducing CO_(2) emissions that would otherwise contribute to climate change.From this perspective,the discussion on carbon capture focuses on chemical absorption technology,primarily due to its commercialization potential.The CO_(2) absorptive capacity and absorption rate of various chemical solvents have been summarized.The carbon utilization focuses on electrochemical conversion routes converting CO_(2) into potentially valuable chemicals which have received particular attention in recent years.The Faradaic conversion efficiencies for various CO_(2) reduction products are used to describe efficiency improvements.For carbon storage,successful deployment relies on a better understanding of fluid mechanics,geomechanics,and reactive transport,which are discussed in details.
文摘The Alkaline Thermal Treatment(ATT)of biomass is one of the few biomass conversion processes that has a potential for BECCS(bio-energy with carbon capture and storage).Combining in-situ carbon capture withcreates a carbon-neutral process that has the potential to be carbon-negative.This study has shown that the conversion of cellulose tosuppressedcan be achieved through the reforming of gaseous intermediates in a fixed bed of 10%Ni/ZrO2.Reforming occurs at low temperatures≤773 K,which could allow for improved sustainability.
基金financial support in the form of a Project Grant (IS-STAC/CO2-SR-79/10/G)
文摘Investigating the immobilization of CO2,previous basalt-water-CO2 interaction studies revealed the formation of carbonates over a short period,but with the extensive formation of secondary silicates(SS).The mechanisms involved in these processes remain unresolved,so the present study was undertaken to understand secondary mineral formation mechanisms.XRPD and Rietveld refinement data for neo-formed minerals show a drastic decrease in the Ca-O bond length,with the calcite structure degenerating after 80 h(hours).However,SEM images and EDS data revealed that a longer interaction time resulted in the formation of chlorite and smectite,adjacent to basalt grains which prevent basaltwater-CO2 interaction to form carbonates,thus restricting carbonate formation.As a result of this,the CO2 mineralization rate is initially high(till 80 h),but it later reduces drastically.It is evident that,for such temperature-controlled transformations,low temperature is conducive to minimizing SS surface coating at the time of mineral carbonation.
基金supported by the National Natural Science Foundation of China (21878056)Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology (2019Z002)。
文摘The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.
