It is found that strong basic oxides including Li2O,Na2O,K2O and BaO,which are used to replace a part of CaO in CaO-based fluxes,can lower the melting point and the viscosity and enhance the dephosphorizing ability. T...It is found that strong basic oxides including Li2O,Na2O,K2O and BaO,which are used to replace a part of CaO in CaO-based fluxes,can lower the melting point and the viscosity and enhance the dephosphorizing ability. The mechanism was analysed and the addition of Li2O to CaO based fluxes was recommended.展开更多
The experiments were carried out at 1 175-1 450 ℃ to study the phosphorus distribution ratio between molten Ca O-based slags and carbon saturated hot metal. The phosphate capacity of the slags and the activity coeffi...The experiments were carried out at 1 175-1 450 ℃ to study the phosphorus distribution ratio between molten Ca O-based slags and carbon saturated hot metal. The phosphate capacity of the slags and the activity coefficient of PO2. 5were calculated from the phosphorus distribution ratio. The effect of addition of Ca F2 and / or Ca Cl2 on the thermodynamic properties of slags was discussed. The correlation of optical basicity with phosphate capacity of slags was studied,and the dephosphorization ability of Ca O-based fluxes with various additives was compared with the results from different studies.展开更多
The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerge...The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerged entry nozzles,form floaters in the molds,and produce various surface defects on the cast slabs.This review summarizes the effects of nonmetallic inclusions on traditional CaO-SiO_(2)-based(CS)mold fluxes and novel CaO-Al_(2)O_(3)-based(CA)low-or non-reactive fluxes containing TiO_(2),BaO,and B_(2)O_(3)additives to avoid undesirable steel,slag,and inclusion reactions,with the aim of providing a new perspective for research and practice related to balancing the lubrication and heat transfer of mold fluxes to promote smooth operation and reduce surface defects on cast slabs.For traditional CS mold flux,although the addition of solvents such as Na_(2)O,Li_(2)O,and B_(2)O_(3)can enhance flowability,steel-slag reactions persist,limiting the effectiveness of CS mold fluxes in high-Ti steel casting.Low-or non-reactive CA mold fluxes with reduced SiO_(2)content are a research focus,where adding other components can significantly change flux characteristics.Replacing CaO with BaO can lower the melting point and inhibit crystallization,allowing the flux to maintain good flowability at low temperatures.Replacing SiO_(2)with TiO_(2)can stabilize the viscosity and enhance heat transfer.To reduce the environmental impact,fluorides are replaced with components such as TiO_(2),B_(2)O_(3),BaO,Li_(2)O,and Na_(2)O for F-frce mold fluxes with similar lubrication,crystallization,and heat-transfer effects.When TiO_(2)replaces CaF_(2),it stabilizes the viscosity and enhances the heat conductivity,forming CaTiO_(3)and CaSiTiO_(5)phases instead of cuspidine to control crystallization.B_(2)O_(3)lowers the melting point and suppresses crystallization,forming phases such as Ca_(3)B_(2)O_(6)and Ca_(11)Si_(4)B_(2)O_(22).BaO introduces non-bridging oxygen to reduce viscosity and ensure flux flowability at low temperatures.However,further studies are required to determine the optimal mold flux compositions corresponding to the steel grades and the interactions between the various components of the mold flux.In the future,the practical application of new mold fluxes for high-Ti steel will become the focus of further verification to achieve a balance between lubrication and heat transfer,which is expected to minimize the occurrence of casting problems and slab defects.展开更多
CaO-based heat carriers have shown great prospects for thermochemical energy storage in concentrated solar power systems due to the features such as rich reserves,environmental safety,high energy storage densities and...CaO-based heat carriers have shown great prospects for thermochemical energy storage in concentrated solar power systems due to the features such as rich reserves,environmental safety,high energy storage densities and high operation temperatures.However,the density decay because of sintering and poor direct solar absorption of white CaO based heat carriers are the two main obstacles lying on the way to the realistic applications.This work introduced dark Mn-based inert support into calcium heat carriers,attempting to solve the above problems simultaneously.As an inert support,the finely dispersed Ca_(2)MnO_(4) functioned as the metal framework to resist CaCO_(3)/CaO sintering.Consequently,the cyclic stability of CaO-based heat carriers,resulting in the high energy storage densities of~2000 kJ/kg even over 20 cycles.As a dark material,Ca_(2)MnO_(4) successfully darkened CaO-based heat carriers,thereby greatly enhanced the direct solar absorption.In addition,the granulation of CaO-based heat carriers was also studied.The pellets showed satisfactory attrition resistance with only 9.85 wt% mass loss over 3200 cycles.In general,good physicochemical performance of Mn-doped CaO-based heat carrier endows it with great prospects for solar energy storage.展开更多
Frequent droughts pose considerable threat to global forest carbon uptake,but little is known about the response of forest carbon fluxes in climatic transition zones to seasonal drought.In this study,the responses of ...Frequent droughts pose considerable threat to global forest carbon uptake,but little is known about the response of forest carbon fluxes in climatic transition zones to seasonal drought.In this study,the responses of carbon fluxes to seasonal drought in two natural forests(Quercus aliena var.acute serrata Maxim and Pinus tabuliformis Carr.)in the Baotianman Nature Reserve were investigated.The Q.aliena forest exhibited a high resilience with stable gross primary productivity(GPP).However,ecosystem respiration(Re)significantly declined by 18.4%compared with normal years,leading to an increase in net carbon sequestration capacity of 4.1%.This resilience was attributed to its deep root system accessing soil water(SWC_(50cm))to sustain stomatal openness,coupled with the efficient utilization of photosynthetically active radiation to drive photosynthesis.In contrast,the P.tabuliformis forest,which relied on shallow soil moisture(SWC_(20cm)),experienced simultaneous decreases in both GPP and Re during drought,with a sharply greater decrease in GPP,resulting in low net carbon sink capacity.Further analysis revealed that the Q.aliena forest prioritized carbon assimilation through a deep water-stomatal synergy strategy(anisohydric behavior),whereas the P.tabuliformis forest adopted an isohydric strategy favoring water conservation at the expense of carbon fixation efficiency.These findings highlight distinct mechanisms underlying drought adaptation between forest types,providing critical insight into optimizing forest carbon cycle models and selecting drought-resistant species under the influence of climate change.展开更多
Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on im...Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on improving the controllability and efficiency of SynRM.Accurate rotor position information is essential for the controller to generate appropriate current and voltage references corresponding to the desired speed and load torque.Shaft-mounted position sensors are generally undesirable because of their high cost,sensitivity to harsh operating conditions,maintenance requirements,and reduced reliability in environments characterized by high vibration.Consequently,sensorless control techniques that estimate rotor position using measured stator currents and voltages have attracted increasing attention.However,magnetic saturation,parameter nonlinearities,and cross-coupling effects significantly degrade position estimation accuracy and may compromise the stability of sensorless SynRM drives.In this paper,a nonlinear SynRM model is developed using finite element analysis(FEA)to accurately capture magnetic saturation and cross-coupling effects,thereby providing a precise representation of the machine’s electromagnetic behavior under varying load and flux conditions.A series of magnetostatic FEA simulations is performed.To reduce computational complexity,only one motor pole is analyzed by applying anti-periodic boundary conditions along the domain sides and enforcing a zero magnetic vector potential on the external stator boundary.Nonlinear iron material properties are modeled using the appropriate B-H curve.The simulations are carried out by imposing d-and q-axis current components and computing the corresponding flux linkages and electromagnetic torque.Based on these results,both apparent and incremental inductances are extracted and incorporated into the control algorithm.An advanced fictitious flux linkage method combined with a phase-locked loop(PLL)is employed for accurate rotor position estimation.Simulation results confirm that the proposed sensorless control strategy ensures stable operation and high position estimation accuracy over the entire speed range.展开更多
Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have n...Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have not been thoroughly investigated.In this study,multiple tracers(hydrochemistry,𝛿D,𝛿18O and 222Rn)were used to compare mechanisms of LGD in Daihai and Ulansuhai Lake in Inner Mongoli1,Northwest China.The hydrochemical types showed a trend from groundwater to lake water,indicating a hydraulic connection between them.In addition,the𝛿D and𝛿18O values of sediment pore water were between the groundwater and lake water,indicating the LGD processes.The radon mass balance model was used to estimate the average groundwater discharge rates of Daihai and Ulansuhai Lake,which were 2.79 mm/day and 3.02 mm/day,respectively.The total nitrogen(TN),total phosphorus(TP),and fluoride inputs associated with LGD in Daihai Lake accounted for 97.52%,96.59%,and 95.84%of the total inputs,respectively.In contrast,TN,TP and fluoride inputs in Ulansuhai Lake were 53.56%,40.98%,and 36.25%,respectively.This indicates that the pollutant inputs associated with LGD posed a potential threat to the ecological stability of Daihai and Ulansuhai Lake.By comparison,the differences of LGD process and associated pollutant flux were controlled by hydrogeological conditions,lakebed permeability and human activities.This study provides a reference for water resources management in Daihai and Ulansuhai Lake basins while improving the understanding of LGD in the Yellow River basin.展开更多
B2O3 is selected as fluxing agent of CaO-based ladle refining slag to decrease the melting temperature as well as to improve the speed of slag forming and the refining efficiency. The effects of B2O3 on the melting te...B2O3 is selected as fluxing agent of CaO-based ladle refining slag to decrease the melting temperature as well as to improve the speed of slag forming and the refining efficiency. The effects of B2O3 on the melting temperature of two series of refining slags including the low basicity slags （the mass ratio of CaO/SiO2 is 3--4） and the high basicity slags （the mass ratio of CaO/SiO2 is 5--8.75） were investigated. The slag melting temperature was meas- ured using the hemisphere method. The results indicate that the fluxing action of B2O3 is better than that of CaF2 and A1203. For the CaO-based refining slag with low basicity, the melting temperature is decreased effectively when B2O3 is used to substitute for equal mass of CaF2, Al2O3 and SiO2, respectively. For the CaO-based refining slag with high basicity, when CaF2 is substituted by B2 03, the melting temperature can be decreased remarkably. Espe- cially, when the mass ratios of CaO/Al2O3 and CaO/SiO2 are in the range of 1.1--4.0 and 5.25--8. 0, respectively, the slag melting temperature is lower than 1 300 ℃. Therefore, the 132 03-containing refining slags with high ratios of CaO/Al2O3 and CaO/SiO2 have ultra low melting temperature.展开更多
High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utiliz...High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utilization.To address this problem,a novel method of co-precipitation modification with Ca,Mg and Zr metals was proposed to improve the CO_(2)capture performance.X-ray diffraction(XRD)patterns and energy dispersive X-ray spectroscopy analysis showed that the two inert supports MgO and CaZrO_(3)were uniformly distributed in the modified calcium-based sorbents.In addition,the XRD results indicated that CaZrO_(3)was produced by the reaction of ZrO_(2)and CaO at high temperatures.The effects of doping ratios,adsorption temperature,calcination temperature,CO_(2)concentration and calcination atmosphere on the adsorption capacity and cycle stability of the modified calcium-based sorbent were studied.The modified calcium-based sorbent achieved the best CO_(2)capture performance when the doping ratio was 10:1:1 with carbonation at 700℃ under 20%CO_(2)/80%N_(2)atmosphere and calcination at 900℃ under100%N_(2)atmosphere.After ten cycles,the average carbonation conversion rate of Ca-10 sorbent was 72%.Finally,the modified calcium-based sorbents successfully reduced the CO_(2)concentration of the pyrolysis gas from 37%to 5%.展开更多
CaO-based sorbent is considered to be a promising candidate for capturing CO_2 at high temperature. However,the adsorption capacity of CaO decreases sharply with the increase of the carbonation/calcination cycles. In ...CaO-based sorbent is considered to be a promising candidate for capturing CO_2 at high temperature. However,the adsorption capacity of CaO decreases sharply with the increase of the carbonation/calcination cycles. In this study, CaO was derived from calcium acetate(CaAc_2), which was doped with different elements(Mg, Al,Ce, Zr and La) to improve the cyclic stability. The carbonation conversion and cyclic stability of sorbents were tested by thermogravimetric analyzer(TGA). The sorbents were characterized by N_2 isothermal adsorption measurements, scanning electron microscopy(SEM) and X-ray diffraction(XRD). The results showed that the cyclic stabilities of all modified sorbents were improved by doping elements, while the carbonation conversions of sorbents in the 1st cycle were not increased by doping different elements. After 22 cycles, the cyclic stabilities of CaO–Al, CaO–Ce and CaO–La were above 96.2%. After 110 cycles, the cyclic stability of CaO–Al was still as high as 87.1%. Furthermore, the carbonation conversion was closely related to the critical time and specific surface area.展开更多
The CaO-based pellets were fabricated using extrusion-spheronization method for calcium looping thermochemical heat storage under the fluidization.The effects of adhesive,biomass-based pore-forming agent,binder and pa...The CaO-based pellets were fabricated using extrusion-spheronization method for calcium looping thermochemical heat storage under the fluidization.The effects of adhesive,biomass-based pore-forming agent,binder and particle size on the heat storage performance and mechanical property of the CaObased pellets were investigated in a bubbling fluidized bed reactor.The addition of 2%(mass)polyvinylpyrrolidone as an adhesive not only helps granulate,but also improves the heat storage capacity of the pellets.All biomass-templated CaO-based pellets display higher heat storage capacity than biomass-free pellets,indicating that the biomass-based pore-forming agent is beneficial for heat storage under the fluidization.Especially,bagasse-templated pellets show the highest heat storage conversion of 0.61 after 10 cycles.Moreover,Al_(2)O_(3)as a binder for the pellets helps obtain high mechanical strength.The CaO-based pellets doped with 10%(mass)bagasse and 5%(mass)Al_(2)O_(3)reach the highest heat storage density of 1621 kJ·kg^(-1) after 30 cycles and the highest crushing strength of 4.98 N.The microstructure of the bagasse-templated pellets appears more porous than that of biomass-free pellets.The bagassetemplated CaO-based pellets doped with Al_(2)O_(3)seem promising for thermochemical heat storage under the fluidization,owing to the enhanced heat storage capacity,excellent mechanical strength,and simplicity of the synthesis procedure.展开更多
Cracks easily generate in concrete at early age owing to the shrinkage deformation.CaO-based expansion agent(CEA)and superabsorbent polymers(SAP)have been extensively used for the mitigation of concrete shrinkage.The ...Cracks easily generate in concrete at early age owing to the shrinkage deformation.CaO-based expansion agent(CEA)and superabsorbent polymers(SAP)have been extensively used for the mitigation of concrete shrinkage.The macroscopic properties of concrete are highly determined by the microstructure.In this study,the influence of CEA and SAP addition on the pore structure evolution of cement paste under different curing temperatures was evaluated via low-field nuclear magnetic resonance spectroscopy.Test results indicated that,in cement paste,a higher CEA content led to a higher porosity and a larger most probable pore diameter(MPPD).Meanwhile,SAP addition increased the porosity and MPPD of CEA cement paste at early age but decreased them after 7 d,and a higher SAP content always brought a higher porosity and MPPD.Furthermore,the addition of SAP led to a lower porosity and MPPD of CEA cement paste than that of plain cement paste after 14 d.Moreover,the porosity and MPPD of CEA cement paste decreased first and subsequently increased as the curing temperature raised.展开更多
The melting of seasonal sea ice in Antarctica plays a pivotal role in the region’s carbon cycle,influencing global carbon storage and the exchange of carbon between the atmosphere and the ocean.However,the impact of ...The melting of seasonal sea ice in Antarctica plays a pivotal role in the region’s carbon cycle,influencing global carbon storage and the exchange of carbon between the atmosphere and the ocean.However,the impact of variability in the timing of seasonal sea ice retreat on the flux and composition of sinking particulate matter remains to be elucidated.In this study,we deployed sediment traps in Prydz Bay during the austral summers of 2019/2020 and 2020/2021,noting that sea ice melting occurred approximately one and a half months earlier in the former summer compared to the latter.We analyzed sediment trap data,which included total mass flux(TMF),particulate organic carbon(POC),biogenic silica(BSi),particulate inorganic carbon,and lithogenic particle(Litho)fluxes,as well as the stable isotopesδ^(13)C andδ^(15)N of particulate organic matter(POM).Additionally,we incorporated remote sensing data on sea ice concentration and chlorophyll a.This dramatic delay in sea ice melting timing could result in a significant increase in TMF,BSi and POC fluxes in the summer of 2020/2021 compared to 2019/2020.Elevated BSi fluxes and more ^(13)C-depleted POC in the austral summer of 2020/2021 suggest that the delayed melting of sea ice may have stimulated the productivity of centric diatoms.Furthermore,the higher BSi/POC ratio and more negativeδ^(15)N values of POM,along with a reduced presence of krill in the traps,indicate a diminished grazing pressure from zooplankton,which collectively enhanced the sedimentation efficiency of POC during the austral summer of 2020/2021.These findings highlight the critical role of sea ice melting timing in regulating productivity,flux and composition of sinking particulate matter in the Prydz Bay ecosystem,with significant implications for carbon cycling in polar oceans.展开更多
During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a rest...During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.展开更多
Carbon fluxes are essential indicators assessing vegetation carbon cycle functions.However,the extent and mechanisms by which climate change and human activities influence the spatiotemporal dynamics of carbon fluxes ...Carbon fluxes are essential indicators assessing vegetation carbon cycle functions.However,the extent and mechanisms by which climate change and human activities influence the spatiotemporal dynamics of carbon fluxes in arid oasis and non-oasis area remains unclear.Here,we assessed and predicted the future effects of climate change and human activities on carbon fluxes in the Hexi Corridor.The results showed that the annual average gross primary productivity(GPP),net ecosystem productivity(NEP),and ecosystem respiration(Reco)in the Hexi Corridor oasis increased by 263.91 g C·m^(-2)·yr^(-1),118.45 g C·m^(-2)·yr^(-1)and 122.46 g C·m^(-2)·yr^(-1),respectively,due to the expansion of the oasis area by 3424.84 km^(2) caused by human activities from 2000 to 2022.Both oasis and non-oasis arid ecosystems in the Hexi Corridor acted as carbon sinks.Compared to the non-oasis area,the carbon fluxes contributions of oasis area increased,ranging from 10.21%to 13.99%for GPP,8.50%to11.68%for NEP,and 13.34%to 17.13%for Reco.The contribution of the carbon flux from the oasis expansion area to the total carbon flux change in the Hexi Corridor was 30.96%(7.09 Tg C yr^(-1))for GPP,29.57%(3.39 Tg C yr^(-1))for NEP and 32.40%(3.58 Tg C yr^(-1))for Reco.The changes in carbon fluxes in the oasis area were mainly attributed to human activities(oasis expansion)and temperature,whereas non-oasis area was mainly due to climate factors.Moreover,the future increasing trends were observed for GPP(64.99%),NEP(66.29%)and Reco(82.08%)in the Hexi Corridor.This study provides new insights into the regulatory mechanisms of carbon cycle in the arid oasis and non-oasis area.展开更多
To explore the relationship between dynamic characteristics and wake patterns,numerical simulations were conducted on three equal-diameter cylinders arranged in an equilateral triangle.The simulations varied reduced v...To explore the relationship between dynamic characteristics and wake patterns,numerical simulations were conducted on three equal-diameter cylinders arranged in an equilateral triangle.The simulations varied reduced velocities and gap spacing to observe flow-induced vibrations(FIVs).The immersed boundary–lattice Boltzmann flux solver(IB–LBFS)was applied as a numerical solution method,allowing for straightforward application on a simple Cartesian mesh.The accuracy and rationality of this method have been verified through comparisons with previous numerical results,including studies on flow past three stationary circular cylinders arranged in a similar pattern and vortex-induced vibrations of a single cylinder across different reduced velocities.When examining the FIVs of three cylinders,numerical simulations were carried out across a range of reduced velocities(3.0≤Ur≤13.0)and gap spacing(L=3D,4D,and 5D).The observed vibration response included several regimes:the desynchronization regime,the initial branch,and the lower branch.Notably,the transverse amplitude peaked,and a double vortex street formed in the wake when the reduced velocity reached the lower branch.This arrangement of three cylinders proved advantageous for energy capture as the upstream cylinder’s vibration response mirrored that of an isolated cylinder,while the response of each downstream cylinder was significantly enhanced.Compared to a single cylinder,the vibration and flow characteristics of this system are markedly more complex.The maximum transverse amplitudes of the downstream cylinders are nearly identical and exceed those observed in a single-cylinder set-up.Depending on the gap spacing,the flow pattern varied:it was in-phase for L=3D,antiphase for L=4D,and exhibited vortex shedding for L=5D.The wake configuration mainly featured double vortex streets for L=3D and evolved into two pairs of double vortex streets for L=5D.Consequently,it well illustrates the coupling mechanism that dynamics characteristics and wake vortex change with gap spacing and reduced velocities.展开更多
Global warming and nitrogen(N)deposition have a profound impact on greenhouse gas(GHG)fluxes and consequently,they also affect climate change.However,the global combined effects of warming and N addition on GHG fluxes...Global warming and nitrogen(N)deposition have a profound impact on greenhouse gas(GHG)fluxes and consequently,they also affect climate change.However,the global combined effects of warming and N addition on GHG fluxes remain to be fully understood.To address this knowledge gap,a globalmeta-analysis of 197 datasets was performed to assess the response of GHG fluxes to warming and N addition and their interactions under various climate and experimental conditions.The results indicate that warming significantly increased CO_(2)emissions,while N addition and the combined warming and N addition treatments had no impact on CO_(2)emissions.Moreover,both warming and N addition and their interactions exhibited positive effects on N_(2)O emissions.Under the combined warming and N addition treatments,warming was observed to exert a positive main effect on CO_(2)emissions,while N addition had a positive main effect on N_(2)O emissions.The interactive effects of warming and N addition exhibited antagonistic effects on CO_(2),N_(2)O,and CH_(4)emissions,with CH_(4)uptake dominated by additive effects.Furthermore,we identified biome and climate factors as the two treatments.These findings indicate that both warming and N addition substantially impact soil GHG fluxes and highlight the urgent need to investigate the influence of the combination of warming and N addition on terrestrial carbon and N cycling under ongoing global change.展开更多
This study investigates the inward flux events following sawtooth crashes in the edge of HL-2A neutral beam heated plasmas.We identified three distinct types of inward fluxes with varying magnitudes and durations,each...This study investigates the inward flux events following sawtooth crashes in the edge of HL-2A neutral beam heated plasmas.We identified three distinct types of inward fluxes with varying magnitudes and durations,each associated with unique plasma parameter fluctuations.Magnetic fluctuations,particularly the disruption of magnetic surface structures caused by sawtooth crashes,may play a significant role in modulating plasma dynamics.Moreover,the crossphase term and coherence between density and velocity fluctuations were found to be key factors in these flux events,with high coherence correlating with peak inward flux.These findings enhance the understanding of fluctuation-induced transport after sawtooth crashes and have implications for plasma confinement in fusion devices.展开更多
Peng et al.in[Phys.Rev.Research,2020,2(3):033089,11 pp.]formulated one-way fluxes for a general chemical reaction far from equilibrium,with arbitrary complex mechanisms,multiple intermediates,and internal kinetic cycl...Peng et al.in[Phys.Rev.Research,2020,2(3):033089,11 pp.]formulated one-way fluxes for a general chemical reaction far from equilibrium,with arbitrary complex mechanisms,multiple intermediates,and internal kinetic cycles.They defined the limit of the ratio of mesoscopic one-way fluxes and the volume of the tank reactor when the volume tends to infinity as macroscopic one-way fluxes,but a rigorous proof of existence of the limit is still awaiting.In this article,we fill this gap under a mild hypothesis:the Markov chain associated with the chemical master equation has finite states and any two columns in the stoichiometric matrices are not identical.In fact,an explicit expression of the limit is obtained.展开更多
基金Item Sponsored by National Natural Science Foundation of China(59774015)
文摘It is found that strong basic oxides including Li2O,Na2O,K2O and BaO,which are used to replace a part of CaO in CaO-based fluxes,can lower the melting point and the viscosity and enhance the dephosphorizing ability. The mechanism was analysed and the addition of Li2O to CaO based fluxes was recommended.
文摘The experiments were carried out at 1 175-1 450 ℃ to study the phosphorus distribution ratio between molten Ca O-based slags and carbon saturated hot metal. The phosphate capacity of the slags and the activity coefficient of PO2. 5were calculated from the phosphorus distribution ratio. The effect of addition of Ca F2 and / or Ca Cl2 on the thermodynamic properties of slags was discussed. The correlation of optical basicity with phosphate capacity of slags was studied,and the dephosphorization ability of Ca O-based fluxes with various additives was compared with the results from different studies.
基金financially supported by the National Natural Science Foundation of China(Nos.52204345 and 52474361)the Scientific Research Innovation Projects of Graduate Student of Jiangsu province,China(No.KYCX24_4184)。
文摘The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerged entry nozzles,form floaters in the molds,and produce various surface defects on the cast slabs.This review summarizes the effects of nonmetallic inclusions on traditional CaO-SiO_(2)-based(CS)mold fluxes and novel CaO-Al_(2)O_(3)-based(CA)low-or non-reactive fluxes containing TiO_(2),BaO,and B_(2)O_(3)additives to avoid undesirable steel,slag,and inclusion reactions,with the aim of providing a new perspective for research and practice related to balancing the lubrication and heat transfer of mold fluxes to promote smooth operation and reduce surface defects on cast slabs.For traditional CS mold flux,although the addition of solvents such as Na_(2)O,Li_(2)O,and B_(2)O_(3)can enhance flowability,steel-slag reactions persist,limiting the effectiveness of CS mold fluxes in high-Ti steel casting.Low-or non-reactive CA mold fluxes with reduced SiO_(2)content are a research focus,where adding other components can significantly change flux characteristics.Replacing CaO with BaO can lower the melting point and inhibit crystallization,allowing the flux to maintain good flowability at low temperatures.Replacing SiO_(2)with TiO_(2)can stabilize the viscosity and enhance heat transfer.To reduce the environmental impact,fluorides are replaced with components such as TiO_(2),B_(2)O_(3),BaO,Li_(2)O,and Na_(2)O for F-frce mold fluxes with similar lubrication,crystallization,and heat-transfer effects.When TiO_(2)replaces CaF_(2),it stabilizes the viscosity and enhances the heat conductivity,forming CaTiO_(3)and CaSiTiO_(5)phases instead of cuspidine to control crystallization.B_(2)O_(3)lowers the melting point and suppresses crystallization,forming phases such as Ca_(3)B_(2)O_(6)and Ca_(11)Si_(4)B_(2)O_(22).BaO introduces non-bridging oxygen to reduce viscosity and ensure flux flowability at low temperatures.However,further studies are required to determine the optimal mold flux compositions corresponding to the steel grades and the interactions between the various components of the mold flux.In the future,the practical application of new mold fluxes for high-Ti steel will become the focus of further verification to achieve a balance between lubrication and heat transfer,which is expected to minimize the occurrence of casting problems and slab defects.
基金Project(2024BAB094)supported by the Key Research and Development Program of Hubei Province,ChinaProject(2024040801020296)supported by the Natural Science Foundation of Wuhan City,ChinaProject(52276113)supported by the National Natural Science Foundation of China。
文摘CaO-based heat carriers have shown great prospects for thermochemical energy storage in concentrated solar power systems due to the features such as rich reserves,environmental safety,high energy storage densities and high operation temperatures.However,the density decay because of sintering and poor direct solar absorption of white CaO based heat carriers are the two main obstacles lying on the way to the realistic applications.This work introduced dark Mn-based inert support into calcium heat carriers,attempting to solve the above problems simultaneously.As an inert support,the finely dispersed Ca_(2)MnO_(4) functioned as the metal framework to resist CaCO_(3)/CaO sintering.Consequently,the cyclic stability of CaO-based heat carriers,resulting in the high energy storage densities of~2000 kJ/kg even over 20 cycles.As a dark material,Ca_(2)MnO_(4) successfully darkened CaO-based heat carriers,thereby greatly enhanced the direct solar absorption.In addition,the granulation of CaO-based heat carriers was also studied.The pellets showed satisfactory attrition resistance with only 9.85 wt% mass loss over 3200 cycles.In general,good physicochemical performance of Mn-doped CaO-based heat carrier endows it with great prospects for solar energy storage.
基金financially supported by the National Key Research and Development Program of China(2021YFD2200405)the National Natural Science Foundation of China(31930078)special funds for Baotianman Forest Ecosystem Research Station from Chinese Academy of Forestry and Ministry of Science and Technology of China。
文摘Frequent droughts pose considerable threat to global forest carbon uptake,but little is known about the response of forest carbon fluxes in climatic transition zones to seasonal drought.In this study,the responses of carbon fluxes to seasonal drought in two natural forests(Quercus aliena var.acute serrata Maxim and Pinus tabuliformis Carr.)in the Baotianman Nature Reserve were investigated.The Q.aliena forest exhibited a high resilience with stable gross primary productivity(GPP).However,ecosystem respiration(Re)significantly declined by 18.4%compared with normal years,leading to an increase in net carbon sequestration capacity of 4.1%.This resilience was attributed to its deep root system accessing soil water(SWC_(50cm))to sustain stomatal openness,coupled with the efficient utilization of photosynthetically active radiation to drive photosynthesis.In contrast,the P.tabuliformis forest,which relied on shallow soil moisture(SWC_(20cm)),experienced simultaneous decreases in both GPP and Re during drought,with a sharply greater decrease in GPP,resulting in low net carbon sink capacity.Further analysis revealed that the Q.aliena forest prioritized carbon assimilation through a deep water-stomatal synergy strategy(anisohydric behavior),whereas the P.tabuliformis forest adopted an isohydric strategy favoring water conservation at the expense of carbon fixation efficiency.These findings highlight distinct mechanisms underlying drought adaptation between forest types,providing critical insight into optimizing forest carbon cycle models and selecting drought-resistant species under the influence of climate change.
文摘Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on improving the controllability and efficiency of SynRM.Accurate rotor position information is essential for the controller to generate appropriate current and voltage references corresponding to the desired speed and load torque.Shaft-mounted position sensors are generally undesirable because of their high cost,sensitivity to harsh operating conditions,maintenance requirements,and reduced reliability in environments characterized by high vibration.Consequently,sensorless control techniques that estimate rotor position using measured stator currents and voltages have attracted increasing attention.However,magnetic saturation,parameter nonlinearities,and cross-coupling effects significantly degrade position estimation accuracy and may compromise the stability of sensorless SynRM drives.In this paper,a nonlinear SynRM model is developed using finite element analysis(FEA)to accurately capture magnetic saturation and cross-coupling effects,thereby providing a precise representation of the machine’s electromagnetic behavior under varying load and flux conditions.A series of magnetostatic FEA simulations is performed.To reduce computational complexity,only one motor pole is analyzed by applying anti-periodic boundary conditions along the domain sides and enforcing a zero magnetic vector potential on the external stator boundary.Nonlinear iron material properties are modeled using the appropriate B-H curve.The simulations are carried out by imposing d-and q-axis current components and computing the corresponding flux linkages and electromagnetic torque.Based on these results,both apparent and incremental inductances are extracted and incorporated into the control algorithm.An advanced fictitious flux linkage method combined with a phase-locked loop(PLL)is employed for accurate rotor position estimation.Simulation results confirm that the proposed sensorless control strategy ensures stable operation and high position estimation accuracy over the entire speed range.
基金supported by the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2023QN04011)the National Natural Science Foundation of China(Nos.42307092 and 52279067)+1 种基金Ordos Science and Technology Major Project(No.ZD20232303)Project of Key Laboratory of River and Lake in Inner Mongolia Autonomous Region(No.2022QZBZ0003).
文摘Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have not been thoroughly investigated.In this study,multiple tracers(hydrochemistry,𝛿D,𝛿18O and 222Rn)were used to compare mechanisms of LGD in Daihai and Ulansuhai Lake in Inner Mongoli1,Northwest China.The hydrochemical types showed a trend from groundwater to lake water,indicating a hydraulic connection between them.In addition,the𝛿D and𝛿18O values of sediment pore water were between the groundwater and lake water,indicating the LGD processes.The radon mass balance model was used to estimate the average groundwater discharge rates of Daihai and Ulansuhai Lake,which were 2.79 mm/day and 3.02 mm/day,respectively.The total nitrogen(TN),total phosphorus(TP),and fluoride inputs associated with LGD in Daihai Lake accounted for 97.52%,96.59%,and 95.84%of the total inputs,respectively.In contrast,TN,TP and fluoride inputs in Ulansuhai Lake were 53.56%,40.98%,and 36.25%,respectively.This indicates that the pollutant inputs associated with LGD posed a potential threat to the ecological stability of Daihai and Ulansuhai Lake.By comparison,the differences of LGD process and associated pollutant flux were controlled by hydrogeological conditions,lakebed permeability and human activities.This study provides a reference for water resources management in Daihai and Ulansuhai Lake basins while improving the understanding of LGD in the Yellow River basin.
基金Item Sponsored by National High Technology Research and Development Program(863 Program)of China(2007AA03Z548)Natural Science Foundation of Jiangsu Province of China(BK2010355)
文摘B2O3 is selected as fluxing agent of CaO-based ladle refining slag to decrease the melting temperature as well as to improve the speed of slag forming and the refining efficiency. The effects of B2O3 on the melting temperature of two series of refining slags including the low basicity slags （the mass ratio of CaO/SiO2 is 3--4） and the high basicity slags （the mass ratio of CaO/SiO2 is 5--8.75） were investigated. The slag melting temperature was meas- ured using the hemisphere method. The results indicate that the fluxing action of B2O3 is better than that of CaF2 and A1203. For the CaO-based refining slag with low basicity, the melting temperature is decreased effectively when B2O3 is used to substitute for equal mass of CaF2, Al2O3 and SiO2, respectively. For the CaO-based refining slag with high basicity, when CaF2 is substituted by B2 03, the melting temperature can be decreased remarkably. Espe- cially, when the mass ratios of CaO/Al2O3 and CaO/SiO2 are in the range of 1.1--4.0 and 5.25--8. 0, respectively, the slag melting temperature is lower than 1 300 ℃. Therefore, the 132 03-containing refining slags with high ratios of CaO/Al2O3 and CaO/SiO2 have ultra low melting temperature.
基金the support given by the National Key Research and Development Program of China(2018YFC1901203)Natural Science Foundation of Guangdong Province,China(2021A1515010497)+1 种基金Guangzhou Science and Technology Innovation Development Special FundFundamental Research Funds for the Central Universities(2019MS017)。
文摘High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utilization.To address this problem,a novel method of co-precipitation modification with Ca,Mg and Zr metals was proposed to improve the CO_(2)capture performance.X-ray diffraction(XRD)patterns and energy dispersive X-ray spectroscopy analysis showed that the two inert supports MgO and CaZrO_(3)were uniformly distributed in the modified calcium-based sorbents.In addition,the XRD results indicated that CaZrO_(3)was produced by the reaction of ZrO_(2)and CaO at high temperatures.The effects of doping ratios,adsorption temperature,calcination temperature,CO_(2)concentration and calcination atmosphere on the adsorption capacity and cycle stability of the modified calcium-based sorbent were studied.The modified calcium-based sorbent achieved the best CO_(2)capture performance when the doping ratio was 10:1:1 with carbonation at 700℃ under 20%CO_(2)/80%N_(2)atmosphere and calcination at 900℃ under100%N_(2)atmosphere.After ten cycles,the average carbonation conversion rate of Ca-10 sorbent was 72%.Finally,the modified calcium-based sorbents successfully reduced the CO_(2)concentration of the pyrolysis gas from 37%to 5%.
基金Supported by Capture CO_2 and Storage Technology Jointly Studied by USA and China(2013DFB60140-04)Northwest University Graduate Innovative Talent Training Project(YZZ12036)
文摘CaO-based sorbent is considered to be a promising candidate for capturing CO_2 at high temperature. However,the adsorption capacity of CaO decreases sharply with the increase of the carbonation/calcination cycles. In this study, CaO was derived from calcium acetate(CaAc_2), which was doped with different elements(Mg, Al,Ce, Zr and La) to improve the cyclic stability. The carbonation conversion and cyclic stability of sorbents were tested by thermogravimetric analyzer(TGA). The sorbents were characterized by N_2 isothermal adsorption measurements, scanning electron microscopy(SEM) and X-ray diffraction(XRD). The results showed that the cyclic stabilities of all modified sorbents were improved by doping elements, while the carbonation conversions of sorbents in the 1st cycle were not increased by doping different elements. After 22 cycles, the cyclic stabilities of CaO–Al, CaO–Ce and CaO–La were above 96.2%. After 110 cycles, the cyclic stability of CaO–Al was still as high as 87.1%. Furthermore, the carbonation conversion was closely related to the critical time and specific surface area.
基金supported by the National Natural Science Foundation of China(51876105)the Fundamental Research Funds of Shandong University(2018JC039)Major Scientific and Technological Innovation Projects of Key Research&Development Program of Shandong Province(2019JZZY020118).
文摘The CaO-based pellets were fabricated using extrusion-spheronization method for calcium looping thermochemical heat storage under the fluidization.The effects of adhesive,biomass-based pore-forming agent,binder and particle size on the heat storage performance and mechanical property of the CaObased pellets were investigated in a bubbling fluidized bed reactor.The addition of 2%(mass)polyvinylpyrrolidone as an adhesive not only helps granulate,but also improves the heat storage capacity of the pellets.All biomass-templated CaO-based pellets display higher heat storage capacity than biomass-free pellets,indicating that the biomass-based pore-forming agent is beneficial for heat storage under the fluidization.Especially,bagasse-templated pellets show the highest heat storage conversion of 0.61 after 10 cycles.Moreover,Al_(2)O_(3)as a binder for the pellets helps obtain high mechanical strength.The CaO-based pellets doped with 10%(mass)bagasse and 5%(mass)Al_(2)O_(3)reach the highest heat storage density of 1621 kJ·kg^(-1) after 30 cycles and the highest crushing strength of 4.98 N.The microstructure of the bagasse-templated pellets appears more porous than that of biomass-free pellets.The bagassetemplated CaO-based pellets doped with Al_(2)O_(3)seem promising for thermochemical heat storage under the fluidization,owing to the enhanced heat storage capacity,excellent mechanical strength,and simplicity of the synthesis procedure.
基金Projects(51878245,U1965105)supported by the National Natural Science Foundation of ChinaProject(2019GSF110006)supported by the Key Research and Development Program of Shandong Province,China+2 种基金Project(2020Z035)supported by the Ningbo 2025 Science and Technology Major Project,ChinaProject(KJ2017B01)supported by the Scientific Research Project of Department of Education of Anhui Province,ChinaProject(2019CEM001)supported by the State Key Laboratory of High Performance Civil Engineering Materials,China。
文摘Cracks easily generate in concrete at early age owing to the shrinkage deformation.CaO-based expansion agent(CEA)and superabsorbent polymers(SAP)have been extensively used for the mitigation of concrete shrinkage.The macroscopic properties of concrete are highly determined by the microstructure.In this study,the influence of CEA and SAP addition on the pore structure evolution of cement paste under different curing temperatures was evaluated via low-field nuclear magnetic resonance spectroscopy.Test results indicated that,in cement paste,a higher CEA content led to a higher porosity and a larger most probable pore diameter(MPPD).Meanwhile,SAP addition increased the porosity and MPPD of CEA cement paste at early age but decreased them after 7 d,and a higher SAP content always brought a higher porosity and MPPD.Furthermore,the addition of SAP led to a lower porosity and MPPD of CEA cement paste than that of plain cement paste after 14 d.Moreover,the porosity and MPPD of CEA cement paste decreased first and subsequently increased as the curing temperature raised.
基金The National Key Research and Development Program of China under contract No.2022YFE0136500the Scientific Research Fund of the Second Institute of Oceanography,Ministry of Natural Resources,under contract Nos JG2212 and JG2211+2 种基金the National Natural Science Foundation of China under contract Nos 42276255,41976228,and 42176227the National Polar Special Program“Impact and Response of Antarctic Seas to Climate Change”under contract Nos IRASCC 01-01-02 and IRASCC 02-02the China Scholarship Council under contract No.201704180017.
文摘The melting of seasonal sea ice in Antarctica plays a pivotal role in the region’s carbon cycle,influencing global carbon storage and the exchange of carbon between the atmosphere and the ocean.However,the impact of variability in the timing of seasonal sea ice retreat on the flux and composition of sinking particulate matter remains to be elucidated.In this study,we deployed sediment traps in Prydz Bay during the austral summers of 2019/2020 and 2020/2021,noting that sea ice melting occurred approximately one and a half months earlier in the former summer compared to the latter.We analyzed sediment trap data,which included total mass flux(TMF),particulate organic carbon(POC),biogenic silica(BSi),particulate inorganic carbon,and lithogenic particle(Litho)fluxes,as well as the stable isotopesδ^(13)C andδ^(15)N of particulate organic matter(POM).Additionally,we incorporated remote sensing data on sea ice concentration and chlorophyll a.This dramatic delay in sea ice melting timing could result in a significant increase in TMF,BSi and POC fluxes in the summer of 2020/2021 compared to 2019/2020.Elevated BSi fluxes and more ^(13)C-depleted POC in the austral summer of 2020/2021 suggest that the delayed melting of sea ice may have stimulated the productivity of centric diatoms.Furthermore,the higher BSi/POC ratio and more negativeδ^(15)N values of POM,along with a reduced presence of krill in the traps,indicate a diminished grazing pressure from zooplankton,which collectively enhanced the sedimentation efficiency of POC during the austral summer of 2020/2021.These findings highlight the critical role of sea ice melting timing in regulating productivity,flux and composition of sinking particulate matter in the Prydz Bay ecosystem,with significant implications for carbon cycling in polar oceans.
基金financially supported by the National Natural Science Foundation of China(Nos.52274315 and 52374320)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-22-011A1 and FRF-DF22-16)。
文摘During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.
基金The Foundation for Distinguished Young Scholars of Gansu Province,No.22JR5RA046Key Research Program of Gansu Province,No.23ZDKA0004+2 种基金The Joint Funds of the National Natural Science Foundation of China,No.U22A202690Interdisciplinary Youth Team Project from the Key Laboratory of Cryospheric Science and Frozen Soil Engineering,No.CSFSE-ZQ-2408The Youth Innovation Promotion Association CAS to X.W.,No.2020422。
文摘Carbon fluxes are essential indicators assessing vegetation carbon cycle functions.However,the extent and mechanisms by which climate change and human activities influence the spatiotemporal dynamics of carbon fluxes in arid oasis and non-oasis area remains unclear.Here,we assessed and predicted the future effects of climate change and human activities on carbon fluxes in the Hexi Corridor.The results showed that the annual average gross primary productivity(GPP),net ecosystem productivity(NEP),and ecosystem respiration(Reco)in the Hexi Corridor oasis increased by 263.91 g C·m^(-2)·yr^(-1),118.45 g C·m^(-2)·yr^(-1)and 122.46 g C·m^(-2)·yr^(-1),respectively,due to the expansion of the oasis area by 3424.84 km^(2) caused by human activities from 2000 to 2022.Both oasis and non-oasis arid ecosystems in the Hexi Corridor acted as carbon sinks.Compared to the non-oasis area,the carbon fluxes contributions of oasis area increased,ranging from 10.21%to 13.99%for GPP,8.50%to11.68%for NEP,and 13.34%to 17.13%for Reco.The contribution of the carbon flux from the oasis expansion area to the total carbon flux change in the Hexi Corridor was 30.96%(7.09 Tg C yr^(-1))for GPP,29.57%(3.39 Tg C yr^(-1))for NEP and 32.40%(3.58 Tg C yr^(-1))for Reco.The changes in carbon fluxes in the oasis area were mainly attributed to human activities(oasis expansion)and temperature,whereas non-oasis area was mainly due to climate factors.Moreover,the future increasing trends were observed for GPP(64.99%),NEP(66.29%)and Reco(82.08%)in the Hexi Corridor.This study provides new insights into the regulatory mechanisms of carbon cycle in the arid oasis and non-oasis area.
基金Supported by the National Natural Science Foundation of China(52201350,52201394,and 52271301)the Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(Grant No.SML2022008).
文摘To explore the relationship between dynamic characteristics and wake patterns,numerical simulations were conducted on three equal-diameter cylinders arranged in an equilateral triangle.The simulations varied reduced velocities and gap spacing to observe flow-induced vibrations(FIVs).The immersed boundary–lattice Boltzmann flux solver(IB–LBFS)was applied as a numerical solution method,allowing for straightforward application on a simple Cartesian mesh.The accuracy and rationality of this method have been verified through comparisons with previous numerical results,including studies on flow past three stationary circular cylinders arranged in a similar pattern and vortex-induced vibrations of a single cylinder across different reduced velocities.When examining the FIVs of three cylinders,numerical simulations were carried out across a range of reduced velocities(3.0≤Ur≤13.0)and gap spacing(L=3D,4D,and 5D).The observed vibration response included several regimes:the desynchronization regime,the initial branch,and the lower branch.Notably,the transverse amplitude peaked,and a double vortex street formed in the wake when the reduced velocity reached the lower branch.This arrangement of three cylinders proved advantageous for energy capture as the upstream cylinder’s vibration response mirrored that of an isolated cylinder,while the response of each downstream cylinder was significantly enhanced.Compared to a single cylinder,the vibration and flow characteristics of this system are markedly more complex.The maximum transverse amplitudes of the downstream cylinders are nearly identical and exceed those observed in a single-cylinder set-up.Depending on the gap spacing,the flow pattern varied:it was in-phase for L=3D,antiphase for L=4D,and exhibited vortex shedding for L=5D.The wake configuration mainly featured double vortex streets for L=3D and evolved into two pairs of double vortex streets for L=5D.Consequently,it well illustrates the coupling mechanism that dynamics characteristics and wake vortex change with gap spacing and reduced velocities.
基金supported by Ningxia Key Research and Development Fund Project of China(No.2023BCF01048)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2023-JC-YB-182).
文摘Global warming and nitrogen(N)deposition have a profound impact on greenhouse gas(GHG)fluxes and consequently,they also affect climate change.However,the global combined effects of warming and N addition on GHG fluxes remain to be fully understood.To address this knowledge gap,a globalmeta-analysis of 197 datasets was performed to assess the response of GHG fluxes to warming and N addition and their interactions under various climate and experimental conditions.The results indicate that warming significantly increased CO_(2)emissions,while N addition and the combined warming and N addition treatments had no impact on CO_(2)emissions.Moreover,both warming and N addition and their interactions exhibited positive effects on N_(2)O emissions.Under the combined warming and N addition treatments,warming was observed to exert a positive main effect on CO_(2)emissions,while N addition had a positive main effect on N_(2)O emissions.The interactive effects of warming and N addition exhibited antagonistic effects on CO_(2),N_(2)O,and CH_(4)emissions,with CH_(4)uptake dominated by additive effects.Furthermore,we identified biome and climate factors as the two treatments.These findings indicate that both warming and N addition substantially impact soil GHG fluxes and highlight the urgent need to investigate the influence of the combination of warming and N addition on terrestrial carbon and N cycling under ongoing global change.
基金support of these experiments.This work was supported by the National Natural Science Foundation of China(12405268,12175227,11875255,12375226,and 11975231)the National Magnetic Confinement Fusion Science Program of China(2022YFE03060003,2022YFE03100004)+1 种基金the Fundamental Research Funds for the Central Universities(WK2140000016)the China Postdoctoral Science Foundation(2022M723066).
文摘This study investigates the inward flux events following sawtooth crashes in the edge of HL-2A neutral beam heated plasmas.We identified three distinct types of inward fluxes with varying magnitudes and durations,each associated with unique plasma parameter fluctuations.Magnetic fluctuations,particularly the disruption of magnetic surface structures caused by sawtooth crashes,may play a significant role in modulating plasma dynamics.Moreover,the crossphase term and coherence between density and velocity fluctuations were found to be key factors in these flux events,with high coherence correlating with peak inward flux.These findings enhance the understanding of fluctuation-induced transport after sawtooth crashes and have implications for plasma confinement in fusion devices.
基金partially supported by NSFC(Nos.11701265,11961033).
文摘Peng et al.in[Phys.Rev.Research,2020,2(3):033089,11 pp.]formulated one-way fluxes for a general chemical reaction far from equilibrium,with arbitrary complex mechanisms,multiple intermediates,and internal kinetic cycles.They defined the limit of the ratio of mesoscopic one-way fluxes and the volume of the tank reactor when the volume tends to infinity as macroscopic one-way fluxes,but a rigorous proof of existence of the limit is still awaiting.In this article,we fill this gap under a mild hypothesis:the Markov chain associated with the chemical master equation has finite states and any two columns in the stoichiometric matrices are not identical.In fact,an explicit expression of the limit is obtained.
