A genetic algorithm (GA)-based method is proposed to solve the nonlinearoptimization problem of minimum zone cylindricity evaluation. First, the background of the problemis introduced. Then the mathematical model and ...A genetic algorithm (GA)-based method is proposed to solve the nonlinearoptimization problem of minimum zone cylindricity evaluation. First, the background of the problemis introduced. Then the mathematical model and the fitness function are derived from themathematical definition of dimensioning and tolerancing principles. Thirdly with the least squaressolution as the initial values, the whole implementation process of the algorithm is realized inwhich some key techniques, for example, variables representing, population initializing and suchbasic operations as selection, crossover and mutation, are discussed in detail. Finally, examplesare quoted to verify the proposed algorithm. The computation results indicate that the GA-basedoptimization method performs well on cylindricity evaluation. The outstanding advantages concludehigh accuracy, high efficiency and capabilities of solving complicated nonlinear and large spaceproblems.展开更多
Through the analyses and researches on some related references of error separation techniques at home and abroad, this paper has built-up some mathematical models to measure and evaluate workpiece cylindricity error w...Through the analyses and researches on some related references of error separation techniques at home and abroad, this paper has built-up some mathematical models to measure and evaluate workpiece cylindricity error with multipoint method as well as unconstrained optimization methods. A few shortcomings of the technique to solve rotational error and cylindricity error are found, and some precise formulas are given. It is feasible by computer simulation tests.展开更多
The worm wheel whose undercutting characteristic is researched is a member of offsetting normal arc-toothed cylindrical worm drive.The tooth profile of the worm in its offsetting normal section is a circular arc.The n...The worm wheel whose undercutting characteristic is researched is a member of offsetting normal arc-toothed cylindrical worm drive.The tooth profile of the worm in its offsetting normal section is a circular arc.The normal vector used to calculate the first-type limit function is determined in the natural frame without the aid of the curvature parameter of worm helicoid.The first-type limit line is ascertained via solving the nonlinear equations iteratively.It is discovered that one first-type limit line exists on the tooth surface of worm wheel by numerical simulation,and such a line is normally located out of the meshing zone.Only one intersection point exists between the first and second-types of limit lines,and this point is a lubrication weak point.The undercutting mechanism is essentially that a part of the meshing zone near the conjugated line of worm tooth crest will come into the undercutting area and will be cut off during machining the worm wheel.The machining simulation verifies the correctness of undercutting mechanism.Moreover,a convenient and practical characteristic quantity is proposed to judge whether the undercutting exists in the whole meshing zone via computing the first-type limit function values on the worm tooth crest.展开更多
Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of t...Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of the graphite used in the fuel element for these reactors being susceptible to molten salt infiltration,carbon black(CB)was added to increase the density of the graphite,and a fuel element(TRISO(tri-structural isotropic)fuel particles were randomly distributed in the modified graphite matrix)was prepared by cold isostatic pressing process.An out-of-pile performance study shows that the densification and pore structure of the modified graphite matrix were improved,as was the resistance to molten salt infiltration.The median pore size of the modified graphite was reduced from 673 to 433 nm and the threshold pressure for molten salt(FLiBe,66%(molar fraction)LiF and 34%BeF_(2))infiltration was increased from 0.88 to 1.37 MPa.The isotropic CB made the graphite matrix less anisotropic,while its thermal conductivity and compressive strength were reduced due to the difficult graphitization of CB.Fuel elements containing 20%(volume fraction)TRISO particles were prepared.Numerical simulations show that the power and temperature distribution of the fuel were in line with the design requirements.The modified graphite matrix had a higher density,smaller pores,a lower anisotropy and a greater resistance to FLiBe infiltration.展开更多
This study involved a comprehensive investigation aimed at achieving efficient multi-millijoule THz wave generation by exploiting the unique properties of cylindrical GaAs waveguides as effective mediators of the conv...This study involved a comprehensive investigation aimed at achieving efficient multi-millijoule THz wave generation by exploiting the unique properties of cylindrical GaAs waveguides as effective mediators of the conversion of laser energy into THz waves.Through meticulous investigation,valuable insights into optimizing THz generation processes for practical applications were unearthed.By investigating Hertz potentials,an eigen-value equation for the solutions of the guided modes(i.e.,eigenvalues)was found.The effects of various param-eters,including the effective mode index and the laser pulse power,on the electric field components of THz radia-tion,including the fundamental TE(transverse electric)and TM(transverse magnetic)modes,were evaluated.By analyzing these factors,this research elucidated the nuanced mechanisms governing THz wave generation within cylindrical GaAs waveguides,paving the way for refined methodologies and enhanced efficiency.The sig-nificance of cylindrical GaAs waveguides extends beyond their roles as mere facilitators of THz generation;their design and fabrication hold the key to unlocking the potential for compact and portable THz systems.This trans-formative capability not only amplifies the efficiency of THz generation but also broadens the horizons of practical applications.展开更多
Ferrimagnetic materials exhibiting remanence can be used to achieve unidirectional electromagnetic-field propagation in the form of magnetoplasmons(MPs)in the subwavelength regime.This study investigates the MP proper...Ferrimagnetic materials exhibiting remanence can be used to achieve unidirectional electromagnetic-field propagation in the form of magnetoplasmons(MPs)in the subwavelength regime.This study investigates the MP properties and various guiding modes in a hollow cylindrical waveguide made of materials that exhibit remanence.Pattern analysis and numerical simulations are used to demonstrate that dispersion relationships and electromagnetic-field distribution are strongly affected by the operating frequency and physical dimensions of the structure.In addition,the existence of two different guiding modes is proved,namely regular and surface-wave modes.By adjusting the operating frequency and reducing the diameter of the hollow cylinder,the regular mode can be suppressed so as to only retain the surface-wave mode,which enables unidirectional MP propagation in the cylindrical waveguide.Moreover,the unidirectional surface-wave mode is robust to backscattering due to surface roughness and defects,which makes it very useful for application in field-enhancement devices.展开更多
LOKIBASE is a non-linear isolator/dissipator device to protect pallet racking systems against the earthquake.LOKIBASE consists of the following main components:(1)two slider devices on which a rubber membrane is set u...LOKIBASE is a non-linear isolator/dissipator device to protect pallet racking systems against the earthquake.LOKIBASE consists of the following main components:(1)two slider devices on which a rubber membrane is set up(LOKI devices).LOKI devices are linear displacement dependent ones;(2)a cylindrical beam damper(“CANDLE”device).The“CANDLE”device is a non-linear displacement dependent one;(3)two anti-lifting devices(“UP-LIFT”devices);(4)a fuse plug(see www.lokibasedevice.com).The main work which is the purpose of the paper,is the optimization of the behavior of an isolator/dissipator device to mitigate the seismic action on special structures,where the stiffness values are very different in the main cross-aisle and down-aisle directions.Under seismic action,in these structures it is very important to reduce the value of the forces at the Limit state for the safeguard of human life(SLV)in the down-aisle direction as much as possible and simultaneously to use the highest damping value allowed by the building rules to reduce the LOKIBASE displacement at the Limit state for collapse prevention(SLC)in the cross-aisle direction.The goal was achieved through a cylindrical device made of stainless steel(AISI304)with an optimized shape,under large displacement during seismic action.展开更多
Steel cylindrical shells are widely used in engineering structures due to their high strength-to-weight ratio,but they are vulnerable to buckling under axial loads.To address this limitation,fiber-reinforced polymer(F...Steel cylindrical shells are widely used in engineering structures due to their high strength-to-weight ratio,but they are vulnerable to buckling under axial loads.To address this limitation,fiber-reinforced polymer(FRP)composites have emerged as promising materials for structural reinforcement.This study investigates the buckling behavior of steel cylindrical shells reinforced with inner and outer layers of polymer composite materials under axial compression.Using analytical and numerical modeling methods,the critical buckling loads for different reinforcement options were evaluated.Two-sided glass fiber reinforced plastic(GFRP)or carbon fiber reinforced plastic(CFRP)coatings,as well as combined coatings with layers of different composites,were considered.GFRP+CFRPIn the calculations,the coatings were treated as homogeneous orthotropic materials with equivalent averaged elastic characteristics.The numerical analysis revealed that CFRP reinforcement achieved the highest increase in buckling load,with improvements ranging from 9.84%to 47.29%,depending on the composite thickness and steel shell thickness.GFRP reinforcement,while beneficial,demonstrated a lower effectiveness,with buckling load increases between 5.89%and 19.30%.The hybrid reinforcement provided an optimal balance,improving buckling resistance by GFRP+CFRP6.94%to 43.95%.Statistical analysis further identified composite type and thickness as the most significant factors affecting buckling performance.The findings suggest that CFRP is the preferred reinforcement material,especially when applied to thin-walled cylindrical shells,while hybrid reinforcements can be effectively utilized for structures requiring a balance between stiffness and ductility.These insights provide a foundation for optimizing FRP reinforcement strategies to enhance the structural integrity of steel shells in engineering applications.展开更多
This study aims to investigate the effects of heat treatment on the corrosion resistance and antimicrobial activity of Mg-Zn-Ag-xCa alloys under simulated physiological conditions.The focus of this research is to unde...This study aims to investigate the effects of heat treatment on the corrosion resistance and antimicrobial activity of Mg-Zn-Ag-xCa alloys under simulated physiological conditions.The focus of this research is to understand how to optimize the biomedical performance of the alloy by adjusting its composition,particularly its stability in simulated body fluids and its ability to counteract microbes.The corrosion behavior and antibacterial properties of silver-containing magnesium alloys with different calcium contents after solution treatment were studied.The results show that the addition of calcium affects the microstructure of the alloy,including grain refinement and the distribution of the second phase.It acts as a barrier at the microscopic scale,which helps to prevent the invasion of the corrosive agent,thereby improving the overall corrosion resistance of the material.The gradual increase in calcium initially has a positive effect on the properties of the alloy,especially in terms of corrosion resistance.However,when the calcium content increases to 1.5Ca,although the initial corrosion potential of the alloy increases,excessive calcium may lead to excessive accumulation of the second phase in the microstructure,which will have a negative impact on the long-term stability and corrosion resistance of the material.After corrosion,when the calcium content is 1.0 wt%,the surface roughness of the sample is 1.65μm,with the surface being the smoothest,and the corrosion rate is 0.25 mm·year-1.However,when the calcium content increases to 1.5 wt%,the sample exhibits the fastest corrosion rate at 0.45 mm·year-1.The antibacterial properties of magnesium alloy were optimized by adding silver.展开更多
In the present literature,two types of piezoelectric fiber-reinforced composite(PFRC)based cylindrical models are considered to investigate the circumferential shear wave propagation on a cylinder.Model I consists of ...In the present literature,two types of piezoelectric fiber-reinforced composite(PFRC)based cylindrical models are considered to investigate the circumferential shear wave propagation on a cylinder.Model I consists of a pre-stressed PFRC layer imperfectly bonded to a pre-stressed piezoelectric cylinder of infinite length.Model II comprises a pre-stressed PFRC layer that is imperfectly bonded to a fiber-reinforced core cylinder.The dispersion equations have been derived for both models,assuming electrically open and short boundaries.The numerical simulations are carried out,and results are portrayed graphically to show the effects of various parameters.The radius ratio,pre-stress,mechanical imperfect bonding parameter,fiber reinforcement and fiber-matrix volume ratio exert considerable effects on the PFRC cylinder.Comparative analysis of the dispersion behavior reveals that the shear wave’s phase velocity varies differently for Model I and Model II,and the phase velocity for Model I is higher compared to Model II.The phase velocity reaches its minimum when the piezoelectric fiber is 0.5-0.6 by volume fraction in the PFRC layer.展开更多
In this paper,a type of reinforcing structure for composite shell with single and through hole is presented.The experimental tests for the composite shells without hole,with single hole and reinforced structure,with t...In this paper,a type of reinforcing structure for composite shell with single and through hole is presented.The experimental tests for the composite shells without hole,with single hole and reinforced structure,with through hole and reinforced structure subjected to hydrostatic pressure were carried out by the designed experimental test system.The mechanical responses of the composite shells under hydrostatic pressure are obtained by the high-speed camera and strain measurement.The results show that the entire deformation process of the shell can be divided into three:uniform compression,"buckling mode formation"and buckling.The"buckling mode formation"process is captured and reported for the first time.For the composite shell with single hole,the proposed reinforcing structure has a significant reinforcement effect on the shell and the buckling capacity of the shell is not weaker than the complete composite shell.For the composite shell with through hole,sealing effect can be achieved by the proposed reinforcing structure,but the buckling capacity of the shell after reinforcement can only reach 77%of the original buckling capacity.展开更多
Owing to eccentricity and inclination, circularity of a cylindrical workpiece cannot be measured precisely by a circularity measuring machine when the workpiece has a small dimension(diameter ≤ 3 mm). In this paper, ...Owing to eccentricity and inclination, circularity of a cylindrical workpiece cannot be measured precisely by a circularity measuring machine when the workpiece has a small dimension(diameter ≤ 3 mm). In this paper, with the aim of solving this problem, circularity metrology of a small cylindrical workpiece using a segmenting scanning method is analyzed. The cross-sectional circle of the cylinder is segmented into several equivalent arcs for measurement by a two-dimensional coordinate measuring machine(profilometer). The circularity contour is obtained by stitching together arc contours obtained by data processing of the coordinates. Different segmenting patterns for coordinate scanning are considered. Measurement results are presented for three segmentation patterns, with 8, 10, and 12 equal segments, respectively.These results are evaluated in terms of the matching coefficient between neighboring arc contours on circumferential stitching, the Euclidean distance between neighboring arc contours on radial stitching, and the curvature of the arcs. From these evaluations, it is found that as the number of segments is increased, the matching coefficient increases from 0.14 to 0.50, the Euclidean distance decreases from 32 nm to 26 nm,and the curvature becomes close to the standard value.展开更多
Magnesium alloy thin-walled cylindrical components with the advantages of high specific stiffness and strength present broad prospect for the lightweight of aerospace components.However,poor formability resulting from...Magnesium alloy thin-walled cylindrical components with the advantages of high specific stiffness and strength present broad prospect for the lightweight of aerospace components.However,poor formability resulting from the hexagonal close-packed crystal structure in magnesium alloy puts forwards a great challenge for thin-walled cylindrical components fabrication,especially for extreme structure with the thicknesschanging web and the high thin-wall.In this research,an ZK61 magnesium alloy thin-walled cylindrical component was successfully fabricated by two-step forging,i.e.,the pre-forging and final-forging is mainly used for wed and thin-wall formation,respectively.Microstructure and mechanical properties at the core,middle and margin of the web and the thin-wall of the pre-forged and final-forged components are studied in detail.Due to the large strain-effectiveness and metal flow along the radial direction(RD),the grains of the web are all elongated along RD for the pre-forged component,where an increasingly elongated trend is found from the core to the margin of the wed.A relatively low recrystallized degree occurs during pre-forging,and the web at different positions are all with prismatic and pyramid textures.During finalforging,the microstructures of the web and the thin-wall are almost equiaxed due to the remarkable occurrence of dynamic recrystallization.Similarity,except for few basal texture of the thin-wall,only prismatic and pyramid textures are found for the final-forged component.Compared with the initial billet,an obviously improved mechanical isotropy is achieved during pre-forging,which is well-maintained during final-forging.展开更多
Thermal conductivity is an important physical parameter in thermal equipment,in the blast furnace,rotary kiln and other equipment,multi-layer cylindrical wall is extremely important in industrial production of a therm...Thermal conductivity is an important physical parameter in thermal equipment,in the blast furnace,rotary kiln and other equipment,multi-layer cylindrical wall is extremely important in industrial production of a thermal conductivity model,its thermal conductivity coefficient determines the ability of the cylindrical wall,which results in the existence of a large number of multi-layer cylinder thermal conductivity problems of the pitfalls.This paper focuses on the establishment of a mathematical model of the multi-layer cylinder thermal conductivity problem,by applying different voltages to the multi-layer cylinder wall,study the temperature distribution of the multi-layer cylinder wall under the conditions of natural convection and forced convection,and draw the line graphs under the conditions of natural convection and forced convection by Origin software,and finally conclude that:under the same conditions,the forced convection is significantly stronger than the natural convection;under the conditions of different voltages,the multi-layer cylinder wall under the conditions of steady state convection,the forced convection is much stronger than natural convection.Under different voltage conditions,the temperature of the multilayer cylinder wall under steady state conditions increases with the increase of voltage,which provides a strong support for the related research.展开更多
With the development of computer vision technology,panoramic image stitching has been widely used in fields such as scene reconstruction.A single traditional image cannot fully capture the panoramic view of the iconic...With the development of computer vision technology,panoramic image stitching has been widely used in fields such as scene reconstruction.A single traditional image cannot fully capture the panoramic view of the iconic East Gate of the South Campus of Shaanxi University of Technology.Therefore,this project aims to technically fuse multiple partial images into a complete panoramic image,enabling comprehensive recording and visual presentation of the architectural landscapes and spatial environments in this area.This report first introduces the technical background and application scenarios,clarifying the necessity of panoramic image stitching in campus landscape recording.It then elaborates on the core objectives and practical values,highlighting the role of technical solutions in improving image quality.Technically,a modular system design based on OpenCV is adopted,including modules such as image preprocessing,feature extraction and matching,image registration,fusion,and post-processing.Specifically,the SIFT algorithm is applied for feature extraction,KNN combined with ratio testing is used for feature matching,image registration is achieved by calculating the homography matrix,the fusion process utilizes multiband blending and Laplacian pyramid,and post-processing includes operations such as black area filling and CLAHE contrast enhancement.The experiment was conducted in a specific hardware and software environment using five overlapping images.After preprocessing,stitching,detail enhancement,and black edge repair,a panoramic image was successfully generated.The results show that the panoramic image fully presents the relevant scenery,with concealed seams,balanced exposure differences,and strong hierarchical details.This report provides a systematic description of the project’s technical implementation and achievement application.展开更多
In recent years,calcium lignosulfonate,an environmentally friendly additive,has been widely applied in the field of loess reinforcement.However,research on the anisotropic behavior of lignosulfonatemodified loess unde...In recent years,calcium lignosulfonate,an environmentally friendly additive,has been widely applied in the field of loess reinforcement.However,research on the anisotropic behavior of lignosulfonatemodified loess under complex stress conditions remains limited.This study employs hollow cylindrical torsional shear tests to investigate the effects of calcium lignosulfonate on the anisotropic properties of loess.Additionally,microstructural mechanisms were explored using scanning electron microscopy(SEM),mercury intrusion porosimetry(MIP),and X-ray diffraction(XRD)analyses.The results indicate that lignosulfonate significantly enhances the failure strength of loess,with the modified loess exhibiting superior strength and plasticity compared to remolded loess.Microstructural analysis reveals that lignosulfonate improves particle bonding and stability by filling voids,forming“molecular bridges”,and creating a three-dimensional network structure.The active functional groups of lignosulfonate interact with loess particles through ion exchange and chemical bonding,leading to reduced particle spacing and a thinner double electric layer.Furthermore,the particle orientation in lignosulfonate-modified loess becomes more uniform,effectively mitigating soil anisotropy.This study identifies the optimal calcium lignosulfonate content in loess as 1%,providing theoretical support for roadbed engineering and other construction projects under complex stress conditions in the Xining loess region of Qinghai Province.展开更多
The propagation of solitary waves in fiber-reinforced hyperelastic cylindrical shells holds tremendous potential for structural health monitoring.However,solitary waves under external forces are unstable,and may break...The propagation of solitary waves in fiber-reinforced hyperelastic cylindrical shells holds tremendous potential for structural health monitoring.However,solitary waves under external forces are unstable,and may break then cause chaos in severe cases.In this paper,the stability of solitary waves and chaos suppression in fiber-reinforced compressible hyperelastic cylindrical shells are investigated,and sufficient conditions for chaos generation as well as chaos suppression in cylindrical shells are provided.Under the radial periodic load and structural damping,the traveling wave equation describing the single radial symmetric motion of the cylindrical shell is obtained by using the variational principle and traveling wave method.By employing the bifurcation theory of dynamical systems,the parameter space for the appearance of peak solitary waves,valley solitary waves,and periodic waves in an undisturbed system is determined.The sufficient conditions for chaos generation are derived by the Melnikov method.It is found that the disturbed system leads to chaotic motions in the form of period-doubling bifurcation.Furthermore,a second weak periodic disturbance is applied as the non-feedback control input to suppress chaos,and the initial phase difference serves as the control parameter.According to the Melnikov function,the sufficient conditions for the second excitation amplitude and initial phase difference to suppress chaos are determined.The chaotic motions can be successfully converted to some regular motions by weak periodic perturbations.The results of theoretical analyses are compared with numerical simulation,and they are in good agreement.This paper extends the research scope of nonlinear elastic dynamics,and provides a strategy for controlling chaotic responses of hyperelastic structures.展开更多
The fixed-setting face-milled curvilinear cylindrical gear features teeth that are arc-shaped along the longitudinal direction.Some researchers hypothesize that this arc-tooth may enhance the lubrication conditions of...The fixed-setting face-milled curvilinear cylindrical gear features teeth that are arc-shaped along the longitudinal direction.Some researchers hypothesize that this arc-tooth may enhance the lubrication conditions of the gear.This study focuses on this type of gear,employing both finite element analysis(FEA)and analytical methods to determine the input parameters required for elastohydrodynamic lubrication(EHL)analysis.The effects of assembly errors,tooth surface modifications,load,and face-milling cutter radius on the lubrication performance of these gears are systematically investigated.The finite element model(FEM)of the gear pair is utilized to calculate the coordinates of contact points on the tooth surface and the corresponding contact pressures at the tooth surface nodes throughout a meshing cycle.Subsequently,the normal load on specific gear teeth is determined using a gradient-based approach.Entrainment speed,slip-to-roll ratio,and effective radius near the contact points on the tooth surface are derived through analytical methods.The data obtained from FEA serve as input parameters for EHL simulations.The lubrication performance of the curvilinear cylindrical gear is evaluated through example studies.The findings indicate that using FEA to provide input parameters for EHL simulations can reveal the occurrence of edge contact phenomena during gear meshing,allowing for a more accurate representation of the gear’s lubrication conditions.The lubrication performance of the curvilinear cylindrical gear is shown to be independent of the face-milling cutter radius but is significantly influenced by the size of the contact pattern on the tooth surface.Curvilinear gears with larger contact patterns demonstrate superior lubrication performance.展开更多
The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assu...The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assumed that the source is located outside the cavity at a specified distance from the borehole axis.The magnitudes of the hoop and radial stresses beside the pore pressures exerted on the interface and inside the porous medium surrounding the borehole are calculated and discussed.Biot's poroelastic modeling along with three types of boundary conditions for the cylindrical interface including the ideal fluid,empty borehole,and rigid inclusion with a hard boundary is employed for the analysis.Utilizing a proper translational addition theorem for expressing the incident spherical wave in terms of cylindrical wave expansions,the proposed boundary conditions at the interface are satisfied.Stresses are formulated by means of wave potential functions in a three-dimensional(3D)manner.The effects of the frequency and the radial distance between the source and borehole on the induced stresses are examined for the first cylindrical modes over frequency spectra.Two permeability conditions for the interface and three types of soils for the porous formation are considered throughout the analysis.To give an overall outline of the study,a numerical example is presented.The results clearly indicate that the distance is a key parameter and has considerable effects on the induced stress values.In addition,the interface permeability condition and soil characteristics play an important role in determining the dynamic response of the borehole.Finally,the obtained results are compared with the relevant analyses existing in the literature for some limit cases,and good agreement is achieved.展开更多
Waveform regulator in charge is a method that can realize multi-source detonation wave superposition through a single point detonation.The method does not need to weaken the strength of shell,and relies on the high st...Waveform regulator in charge is a method that can realize multi-source detonation wave superposition through a single point detonation.The method does not need to weaken the strength of shell,and relies on the high stress generated by superposition to cut shell into regular fragments.Additionally,it can be combined with different initiation methods to alter the fragmentation outcomes.In this study,aiming at the fracture strain of metal cylindrical shell driven by explosive charge with waveform regulator,theoretical analysis was first adopted to obtain the prediction model of the fracture strain of cylindrical shell with waveform regulator and the model of the axial distribution of the stress concentration factor.On this basis,both theoretical analysis and numerical models were utilized to investigate the effect of waveform regulator on the initial velocity of fragments.Finally,experiments were conducted to validate the fracture strain prediction model for cylindrical shell with waveform regulator.The research results show that the collision angles of the detonation waves at different axial positions are different,which leads to the stress concentration factor on the shell presenting a trend of gradually decreasing,then sharply increasing,and then rapidly decreasing along the axial direction.Additionally,the changes in the slot spacing and the thickness of outer charge will also affect the stress concentration factor,and the influence of outer charge thickness is relatively large.The smaller the ratio of charge volume to waveform regulator volume,the larger the axial sparse wave intensity and the more the fragment initial velocity decrease.From the initiation end to the non-initiation end,the failure modes of the shell sequentially change from pure shear,to mixed tensile-shear,and finally to pure tensile failure.The experimental results are in good agreement with the calculated results of the fracture strain model,and the maximum relative error is less than 10%,which indicates that the fracture strain prediction model of the cylindrical shell with waveform regulator established in this paper by considering the increase of elastic energy per unit volume caused by stress concentration on the shell is reliable.展开更多
基金This project is supported by National Natural Science Foundation of China (No.59975025)
文摘A genetic algorithm (GA)-based method is proposed to solve the nonlinearoptimization problem of minimum zone cylindricity evaluation. First, the background of the problemis introduced. Then the mathematical model and the fitness function are derived from themathematical definition of dimensioning and tolerancing principles. Thirdly with the least squaressolution as the initial values, the whole implementation process of the algorithm is realized inwhich some key techniques, for example, variables representing, population initializing and suchbasic operations as selection, crossover and mutation, are discussed in detail. Finally, examplesare quoted to verify the proposed algorithm. The computation results indicate that the GA-basedoptimization method performs well on cylindricity evaluation. The outstanding advantages concludehigh accuracy, high efficiency and capabilities of solving complicated nonlinear and large spaceproblems.
文摘Through the analyses and researches on some related references of error separation techniques at home and abroad, this paper has built-up some mathematical models to measure and evaluate workpiece cylindricity error with multipoint method as well as unconstrained optimization methods. A few shortcomings of the technique to solve rotational error and cylindricity error are found, and some precise formulas are given. It is feasible by computer simulation tests.
基金Projects(52205069,52075083,52304049)supported by the National Natural Science Foundation of ChinaProject(2021-BS-164)supported by the Liaoning Province Doctoral Research Startup Fund,China+2 种基金Project(LJKZ0264)supported by the Science and Technology Research Projects of Education Department of Liaoning Province,ChinaProject(G2022003010L)supported by the High-end Foreign Experts Recruitment Plan of ChinaProject(E2021203095)supported by the Natural Science Foundation for Young Scholars of Hebei Province,China。
文摘The worm wheel whose undercutting characteristic is researched is a member of offsetting normal arc-toothed cylindrical worm drive.The tooth profile of the worm in its offsetting normal section is a circular arc.The normal vector used to calculate the first-type limit function is determined in the natural frame without the aid of the curvature parameter of worm helicoid.The first-type limit line is ascertained via solving the nonlinear equations iteratively.It is discovered that one first-type limit line exists on the tooth surface of worm wheel by numerical simulation,and such a line is normally located out of the meshing zone.Only one intersection point exists between the first and second-types of limit lines,and this point is a lubrication weak point.The undercutting mechanism is essentially that a part of the meshing zone near the conjugated line of worm tooth crest will come into the undercutting area and will be cut off during machining the worm wheel.The machining simulation verifies the correctness of undercutting mechanism.Moreover,a convenient and practical characteristic quantity is proposed to judge whether the undercutting exists in the whole meshing zone via computing the first-type limit function values on the worm tooth crest.
文摘Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of the graphite used in the fuel element for these reactors being susceptible to molten salt infiltration,carbon black(CB)was added to increase the density of the graphite,and a fuel element(TRISO(tri-structural isotropic)fuel particles were randomly distributed in the modified graphite matrix)was prepared by cold isostatic pressing process.An out-of-pile performance study shows that the densification and pore structure of the modified graphite matrix were improved,as was the resistance to molten salt infiltration.The median pore size of the modified graphite was reduced from 673 to 433 nm and the threshold pressure for molten salt(FLiBe,66%(molar fraction)LiF and 34%BeF_(2))infiltration was increased from 0.88 to 1.37 MPa.The isotropic CB made the graphite matrix less anisotropic,while its thermal conductivity and compressive strength were reduced due to the difficult graphitization of CB.Fuel elements containing 20%(volume fraction)TRISO particles were prepared.Numerical simulations show that the power and temperature distribution of the fuel were in line with the design requirements.The modified graphite matrix had a higher density,smaller pores,a lower anisotropy and a greater resistance to FLiBe infiltration.
文摘This study involved a comprehensive investigation aimed at achieving efficient multi-millijoule THz wave generation by exploiting the unique properties of cylindrical GaAs waveguides as effective mediators of the conversion of laser energy into THz waves.Through meticulous investigation,valuable insights into optimizing THz generation processes for practical applications were unearthed.By investigating Hertz potentials,an eigen-value equation for the solutions of the guided modes(i.e.,eigenvalues)was found.The effects of various param-eters,including the effective mode index and the laser pulse power,on the electric field components of THz radia-tion,including the fundamental TE(transverse electric)and TM(transverse magnetic)modes,were evaluated.By analyzing these factors,this research elucidated the nuanced mechanisms governing THz wave generation within cylindrical GaAs waveguides,paving the way for refined methodologies and enhanced efficiency.The sig-nificance of cylindrical GaAs waveguides extends beyond their roles as mere facilitators of THz generation;their design and fabrication hold the key to unlocking the potential for compact and portable THz systems.This trans-formative capability not only amplifies the efficiency of THz generation but also broadens the horizons of practical applications.
文摘Ferrimagnetic materials exhibiting remanence can be used to achieve unidirectional electromagnetic-field propagation in the form of magnetoplasmons(MPs)in the subwavelength regime.This study investigates the MP properties and various guiding modes in a hollow cylindrical waveguide made of materials that exhibit remanence.Pattern analysis and numerical simulations are used to demonstrate that dispersion relationships and electromagnetic-field distribution are strongly affected by the operating frequency and physical dimensions of the structure.In addition,the existence of two different guiding modes is proved,namely regular and surface-wave modes.By adjusting the operating frequency and reducing the diameter of the hollow cylinder,the regular mode can be suppressed so as to only retain the surface-wave mode,which enables unidirectional MP propagation in the cylindrical waveguide.Moreover,the unidirectional surface-wave mode is robust to backscattering due to surface roughness and defects,which makes it very useful for application in field-enhancement devices.
文摘LOKIBASE is a non-linear isolator/dissipator device to protect pallet racking systems against the earthquake.LOKIBASE consists of the following main components:(1)two slider devices on which a rubber membrane is set up(LOKI devices).LOKI devices are linear displacement dependent ones;(2)a cylindrical beam damper(“CANDLE”device).The“CANDLE”device is a non-linear displacement dependent one;(3)two anti-lifting devices(“UP-LIFT”devices);(4)a fuse plug(see www.lokibasedevice.com).The main work which is the purpose of the paper,is the optimization of the behavior of an isolator/dissipator device to mitigate the seismic action on special structures,where the stiffness values are very different in the main cross-aisle and down-aisle directions.Under seismic action,in these structures it is very important to reduce the value of the forces at the Limit state for the safeguard of human life(SLV)in the down-aisle direction as much as possible and simultaneously to use the highest damping value allowed by the building rules to reduce the LOKIBASE displacement at the Limit state for collapse prevention(SLC)in the cross-aisle direction.The goal was achieved through a cylindrical device made of stainless steel(AISI304)with an optimized shape,under large displacement during seismic action.
文摘Steel cylindrical shells are widely used in engineering structures due to their high strength-to-weight ratio,but they are vulnerable to buckling under axial loads.To address this limitation,fiber-reinforced polymer(FRP)composites have emerged as promising materials for structural reinforcement.This study investigates the buckling behavior of steel cylindrical shells reinforced with inner and outer layers of polymer composite materials under axial compression.Using analytical and numerical modeling methods,the critical buckling loads for different reinforcement options were evaluated.Two-sided glass fiber reinforced plastic(GFRP)or carbon fiber reinforced plastic(CFRP)coatings,as well as combined coatings with layers of different composites,were considered.GFRP+CFRPIn the calculations,the coatings were treated as homogeneous orthotropic materials with equivalent averaged elastic characteristics.The numerical analysis revealed that CFRP reinforcement achieved the highest increase in buckling load,with improvements ranging from 9.84%to 47.29%,depending on the composite thickness and steel shell thickness.GFRP reinforcement,while beneficial,demonstrated a lower effectiveness,with buckling load increases between 5.89%and 19.30%.The hybrid reinforcement provided an optimal balance,improving buckling resistance by GFRP+CFRP6.94%to 43.95%.Statistical analysis further identified composite type and thickness as the most significant factors affecting buckling performance.The findings suggest that CFRP is the preferred reinforcement material,especially when applied to thin-walled cylindrical shells,while hybrid reinforcements can be effectively utilized for structures requiring a balance between stiffness and ductility.These insights provide a foundation for optimizing FRP reinforcement strategies to enhance the structural integrity of steel shells in engineering applications.
基金supported by Wenhai Program of the S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(No.2021WHZZB2301)Hainan Provincial Joint Project of Sanya Yazhou Bay Science and Technology City(No.2021CXLH0005)Overseas Science and Education Centers of Bureau of International Cooperation Chinese Academy of Sciences(No.121311KYSB20210005-2).
文摘This study aims to investigate the effects of heat treatment on the corrosion resistance and antimicrobial activity of Mg-Zn-Ag-xCa alloys under simulated physiological conditions.The focus of this research is to understand how to optimize the biomedical performance of the alloy by adjusting its composition,particularly its stability in simulated body fluids and its ability to counteract microbes.The corrosion behavior and antibacterial properties of silver-containing magnesium alloys with different calcium contents after solution treatment were studied.The results show that the addition of calcium affects the microstructure of the alloy,including grain refinement and the distribution of the second phase.It acts as a barrier at the microscopic scale,which helps to prevent the invasion of the corrosive agent,thereby improving the overall corrosion resistance of the material.The gradual increase in calcium initially has a positive effect on the properties of the alloy,especially in terms of corrosion resistance.However,when the calcium content increases to 1.5Ca,although the initial corrosion potential of the alloy increases,excessive calcium may lead to excessive accumulation of the second phase in the microstructure,which will have a negative impact on the long-term stability and corrosion resistance of the material.After corrosion,when the calcium content is 1.0 wt%,the surface roughness of the sample is 1.65μm,with the surface being the smoothest,and the corrosion rate is 0.25 mm·year-1.However,when the calcium content increases to 1.5 wt%,the sample exhibits the fastest corrosion rate at 0.45 mm·year-1.The antibacterial properties of magnesium alloy were optimized by adding silver.
文摘In the present literature,two types of piezoelectric fiber-reinforced composite(PFRC)based cylindrical models are considered to investigate the circumferential shear wave propagation on a cylinder.Model I consists of a pre-stressed PFRC layer imperfectly bonded to a pre-stressed piezoelectric cylinder of infinite length.Model II comprises a pre-stressed PFRC layer that is imperfectly bonded to a fiber-reinforced core cylinder.The dispersion equations have been derived for both models,assuming electrically open and short boundaries.The numerical simulations are carried out,and results are portrayed graphically to show the effects of various parameters.The radius ratio,pre-stress,mechanical imperfect bonding parameter,fiber reinforcement and fiber-matrix volume ratio exert considerable effects on the PFRC cylinder.Comparative analysis of the dispersion behavior reveals that the shear wave’s phase velocity varies differently for Model I and Model II,and the phase velocity for Model I is higher compared to Model II.The phase velocity reaches its minimum when the piezoelectric fiber is 0.5-0.6 by volume fraction in the PFRC layer.
基金supported by the Ningbo Major Research and Development Plan Project(Grant No.2024Z135)the Natural Science Basic Research Program of Shaanxi Province(Grant No.2024JC-YBMS-322)+1 种基金China Postdoctoral Science Foundation(Grant No.2020M673492)National Natural Science Foundation of China(Grant No.51909219)。
文摘In this paper,a type of reinforcing structure for composite shell with single and through hole is presented.The experimental tests for the composite shells without hole,with single hole and reinforced structure,with through hole and reinforced structure subjected to hydrostatic pressure were carried out by the designed experimental test system.The mechanical responses of the composite shells under hydrostatic pressure are obtained by the high-speed camera and strain measurement.The results show that the entire deformation process of the shell can be divided into three:uniform compression,"buckling mode formation"and buckling.The"buckling mode formation"process is captured and reported for the first time.For the composite shell with single hole,the proposed reinforcing structure has a significant reinforcement effect on the shell and the buckling capacity of the shell is not weaker than the complete composite shell.For the composite shell with through hole,sealing effect can be achieved by the proposed reinforcing structure,but the buckling capacity of the shell after reinforcement can only reach 77%of the original buckling capacity.
基金supported by the National Defense Basic Scientific Research Program of China(Grant No.JCKY2019427D002).
文摘Owing to eccentricity and inclination, circularity of a cylindrical workpiece cannot be measured precisely by a circularity measuring machine when the workpiece has a small dimension(diameter ≤ 3 mm). In this paper, with the aim of solving this problem, circularity metrology of a small cylindrical workpiece using a segmenting scanning method is analyzed. The cross-sectional circle of the cylinder is segmented into several equivalent arcs for measurement by a two-dimensional coordinate measuring machine(profilometer). The circularity contour is obtained by stitching together arc contours obtained by data processing of the coordinates. Different segmenting patterns for coordinate scanning are considered. Measurement results are presented for three segmentation patterns, with 8, 10, and 12 equal segments, respectively.These results are evaluated in terms of the matching coefficient between neighboring arc contours on circumferential stitching, the Euclidean distance between neighboring arc contours on radial stitching, and the curvature of the arcs. From these evaluations, it is found that as the number of segments is increased, the matching coefficient increases from 0.14 to 0.50, the Euclidean distance decreases from 32 nm to 26 nm,and the curvature becomes close to the standard value.
基金supported by the National Natural Science Foundation of China(No.52405408,No.U21A20131,No.U2037204,No.52422510)the Natural Science Foundation of Hubei Province(No.2023AFB116)+1 种基金the State Key Laboratory of Materials Processing and Die&Mould TechnologyHuazhong University of Science and Technology(No.P2022-005)。
文摘Magnesium alloy thin-walled cylindrical components with the advantages of high specific stiffness and strength present broad prospect for the lightweight of aerospace components.However,poor formability resulting from the hexagonal close-packed crystal structure in magnesium alloy puts forwards a great challenge for thin-walled cylindrical components fabrication,especially for extreme structure with the thicknesschanging web and the high thin-wall.In this research,an ZK61 magnesium alloy thin-walled cylindrical component was successfully fabricated by two-step forging,i.e.,the pre-forging and final-forging is mainly used for wed and thin-wall formation,respectively.Microstructure and mechanical properties at the core,middle and margin of the web and the thin-wall of the pre-forged and final-forged components are studied in detail.Due to the large strain-effectiveness and metal flow along the radial direction(RD),the grains of the web are all elongated along RD for the pre-forged component,where an increasingly elongated trend is found from the core to the margin of the wed.A relatively low recrystallized degree occurs during pre-forging,and the web at different positions are all with prismatic and pyramid textures.During finalforging,the microstructures of the web and the thin-wall are almost equiaxed due to the remarkable occurrence of dynamic recrystallization.Similarity,except for few basal texture of the thin-wall,only prismatic and pyramid textures are found for the final-forged component.Compared with the initial billet,an obviously improved mechanical isotropy is achieved during pre-forging,which is well-maintained during final-forging.
基金The Natural Science Foundation of Liaoning Province of China(Grant No.2023-MSLH-314)he 2024 Yingkou Institute of Technology Campus level Scientific Research Project(FDL202408)+1 种基金The Foundation of Liaoning Provincial Key Laboratoryof Energy Storageand Utilization(GrantNo.CNNK202406)Yingkou Instituteof Technology campus level research project-Development of food additive supercriticalextraction equipment and fluid transmission systemresearch(Grant No.HX202427).
文摘Thermal conductivity is an important physical parameter in thermal equipment,in the blast furnace,rotary kiln and other equipment,multi-layer cylindrical wall is extremely important in industrial production of a thermal conductivity model,its thermal conductivity coefficient determines the ability of the cylindrical wall,which results in the existence of a large number of multi-layer cylinder thermal conductivity problems of the pitfalls.This paper focuses on the establishment of a mathematical model of the multi-layer cylinder thermal conductivity problem,by applying different voltages to the multi-layer cylinder wall,study the temperature distribution of the multi-layer cylinder wall under the conditions of natural convection and forced convection,and draw the line graphs under the conditions of natural convection and forced convection by Origin software,and finally conclude that:under the same conditions,the forced convection is significantly stronger than the natural convection;under the conditions of different voltages,the multi-layer cylinder wall under the conditions of steady state convection,the forced convection is much stronger than natural convection.Under different voltage conditions,the temperature of the multilayer cylinder wall under steady state conditions increases with the increase of voltage,which provides a strong support for the related research.
文摘With the development of computer vision technology,panoramic image stitching has been widely used in fields such as scene reconstruction.A single traditional image cannot fully capture the panoramic view of the iconic East Gate of the South Campus of Shaanxi University of Technology.Therefore,this project aims to technically fuse multiple partial images into a complete panoramic image,enabling comprehensive recording and visual presentation of the architectural landscapes and spatial environments in this area.This report first introduces the technical background and application scenarios,clarifying the necessity of panoramic image stitching in campus landscape recording.It then elaborates on the core objectives and practical values,highlighting the role of technical solutions in improving image quality.Technically,a modular system design based on OpenCV is adopted,including modules such as image preprocessing,feature extraction and matching,image registration,fusion,and post-processing.Specifically,the SIFT algorithm is applied for feature extraction,KNN combined with ratio testing is used for feature matching,image registration is achieved by calculating the homography matrix,the fusion process utilizes multiband blending and Laplacian pyramid,and post-processing includes operations such as black area filling and CLAHE contrast enhancement.The experiment was conducted in a specific hardware and software environment using five overlapping images.After preprocessing,stitching,detail enhancement,and black edge repair,a panoramic image was successfully generated.The results show that the panoramic image fully presents the relevant scenery,with concealed seams,balanced exposure differences,and strong hierarchical details.This report provides a systematic description of the project’s technical implementation and achievement application.
基金supported by the National Natural Science Foundation of China(No.52168054 and No.52468054)the Science and Technology Cooperation Special Project of Qinghai Province(No.2023-HZ-806)。
文摘In recent years,calcium lignosulfonate,an environmentally friendly additive,has been widely applied in the field of loess reinforcement.However,research on the anisotropic behavior of lignosulfonatemodified loess under complex stress conditions remains limited.This study employs hollow cylindrical torsional shear tests to investigate the effects of calcium lignosulfonate on the anisotropic properties of loess.Additionally,microstructural mechanisms were explored using scanning electron microscopy(SEM),mercury intrusion porosimetry(MIP),and X-ray diffraction(XRD)analyses.The results indicate that lignosulfonate significantly enhances the failure strength of loess,with the modified loess exhibiting superior strength and plasticity compared to remolded loess.Microstructural analysis reveals that lignosulfonate improves particle bonding and stability by filling voids,forming“molecular bridges”,and creating a three-dimensional network structure.The active functional groups of lignosulfonate interact with loess particles through ion exchange and chemical bonding,leading to reduced particle spacing and a thinner double electric layer.Furthermore,the particle orientation in lignosulfonate-modified loess becomes more uniform,effectively mitigating soil anisotropy.This study identifies the optimal calcium lignosulfonate content in loess as 1%,providing theoretical support for roadbed engineering and other construction projects under complex stress conditions in the Xining loess region of Qinghai Province.
基金support from the National Natural Science Foundation of China(Nos.12102242 and 12172086)the Educational Foundation of Liaoning Province(No.JYTQN2023261)the Key R&D Program of Shandong Province of China(No.2022SFGC0801).
文摘The propagation of solitary waves in fiber-reinforced hyperelastic cylindrical shells holds tremendous potential for structural health monitoring.However,solitary waves under external forces are unstable,and may break then cause chaos in severe cases.In this paper,the stability of solitary waves and chaos suppression in fiber-reinforced compressible hyperelastic cylindrical shells are investigated,and sufficient conditions for chaos generation as well as chaos suppression in cylindrical shells are provided.Under the radial periodic load and structural damping,the traveling wave equation describing the single radial symmetric motion of the cylindrical shell is obtained by using the variational principle and traveling wave method.By employing the bifurcation theory of dynamical systems,the parameter space for the appearance of peak solitary waves,valley solitary waves,and periodic waves in an undisturbed system is determined.The sufficient conditions for chaos generation are derived by the Melnikov method.It is found that the disturbed system leads to chaotic motions in the form of period-doubling bifurcation.Furthermore,a second weak periodic disturbance is applied as the non-feedback control input to suppress chaos,and the initial phase difference serves as the control parameter.According to the Melnikov function,the sufficient conditions for the second excitation amplitude and initial phase difference to suppress chaos are determined.The chaotic motions can be successfully converted to some regular motions by weak periodic perturbations.The results of theoretical analyses are compared with numerical simulation,and they are in good agreement.This paper extends the research scope of nonlinear elastic dynamics,and provides a strategy for controlling chaotic responses of hyperelastic structures.
基金funded by the Sichuan Science and Technology Program(Project Nos.2024NSFSC0140,2023NSFSC0414,2022NSFSC0454)Panzhihua City Provincial Targeted Financial Resources Transfer Payment(Grant No.222Y2F-GG-04)+4 种基金Open Project of the Key Laboratory of Process Equipment and Control in Sichuan Province(ProjectNo.GK202211)Cultivation Research Project of PanzhihuaUniversity(ProjectNo.2023PY11)Open Project of Sichuan Provincial Engineering Technology Research Center for Advanced Manufacturing of Titanium Alloys(Project No.TM-2023-Z-02)Open Project of Panzhihua Key Laboratory of Advanced Manufacturing Technology(Project No.2022XJZD05).
文摘The fixed-setting face-milled curvilinear cylindrical gear features teeth that are arc-shaped along the longitudinal direction.Some researchers hypothesize that this arc-tooth may enhance the lubrication conditions of the gear.This study focuses on this type of gear,employing both finite element analysis(FEA)and analytical methods to determine the input parameters required for elastohydrodynamic lubrication(EHL)analysis.The effects of assembly errors,tooth surface modifications,load,and face-milling cutter radius on the lubrication performance of these gears are systematically investigated.The finite element model(FEM)of the gear pair is utilized to calculate the coordinates of contact points on the tooth surface and the corresponding contact pressures at the tooth surface nodes throughout a meshing cycle.Subsequently,the normal load on specific gear teeth is determined using a gradient-based approach.Entrainment speed,slip-to-roll ratio,and effective radius near the contact points on the tooth surface are derived through analytical methods.The data obtained from FEA serve as input parameters for EHL simulations.The lubrication performance of the curvilinear cylindrical gear is evaluated through example studies.The findings indicate that using FEA to provide input parameters for EHL simulations can reveal the occurrence of edge contact phenomena during gear meshing,allowing for a more accurate representation of the gear’s lubrication conditions.The lubrication performance of the curvilinear cylindrical gear is shown to be independent of the face-milling cutter radius but is significantly influenced by the size of the contact pattern on the tooth surface.Curvilinear gears with larger contact patterns demonstrate superior lubrication performance.
文摘The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assumed that the source is located outside the cavity at a specified distance from the borehole axis.The magnitudes of the hoop and radial stresses beside the pore pressures exerted on the interface and inside the porous medium surrounding the borehole are calculated and discussed.Biot's poroelastic modeling along with three types of boundary conditions for the cylindrical interface including the ideal fluid,empty borehole,and rigid inclusion with a hard boundary is employed for the analysis.Utilizing a proper translational addition theorem for expressing the incident spherical wave in terms of cylindrical wave expansions,the proposed boundary conditions at the interface are satisfied.Stresses are formulated by means of wave potential functions in a three-dimensional(3D)manner.The effects of the frequency and the radial distance between the source and borehole on the induced stresses are examined for the first cylindrical modes over frequency spectra.Two permeability conditions for the interface and three types of soils for the porous formation are considered throughout the analysis.To give an overall outline of the study,a numerical example is presented.The results clearly indicate that the distance is a key parameter and has considerable effects on the induced stress values.In addition,the interface permeability condition and soil characteristics play an important role in determining the dynamic response of the borehole.Finally,the obtained results are compared with the relevant analyses existing in the literature for some limit cases,and good agreement is achieved.
基金supported by the National Natural Science Foundation of China(Grant No.12302437)Natural Science Foundation of Jiangsu Province(Grant No.SBK2023045424)。
文摘Waveform regulator in charge is a method that can realize multi-source detonation wave superposition through a single point detonation.The method does not need to weaken the strength of shell,and relies on the high stress generated by superposition to cut shell into regular fragments.Additionally,it can be combined with different initiation methods to alter the fragmentation outcomes.In this study,aiming at the fracture strain of metal cylindrical shell driven by explosive charge with waveform regulator,theoretical analysis was first adopted to obtain the prediction model of the fracture strain of cylindrical shell with waveform regulator and the model of the axial distribution of the stress concentration factor.On this basis,both theoretical analysis and numerical models were utilized to investigate the effect of waveform regulator on the initial velocity of fragments.Finally,experiments were conducted to validate the fracture strain prediction model for cylindrical shell with waveform regulator.The research results show that the collision angles of the detonation waves at different axial positions are different,which leads to the stress concentration factor on the shell presenting a trend of gradually decreasing,then sharply increasing,and then rapidly decreasing along the axial direction.Additionally,the changes in the slot spacing and the thickness of outer charge will also affect the stress concentration factor,and the influence of outer charge thickness is relatively large.The smaller the ratio of charge volume to waveform regulator volume,the larger the axial sparse wave intensity and the more the fragment initial velocity decrease.From the initiation end to the non-initiation end,the failure modes of the shell sequentially change from pure shear,to mixed tensile-shear,and finally to pure tensile failure.The experimental results are in good agreement with the calculated results of the fracture strain model,and the maximum relative error is less than 10%,which indicates that the fracture strain prediction model of the cylindrical shell with waveform regulator established in this paper by considering the increase of elastic energy per unit volume caused by stress concentration on the shell is reliable.
