Sand-bentonite(SB)cutoff walls are commonly used as barriers in polluted areas.The embedded part of an SB wall in an aquitard is crucial for its performance.In this study,a centrifuge modeling test was carried out to ...Sand-bentonite(SB)cutoff walls are commonly used as barriers in polluted areas.The embedded part of an SB wall in an aquitard is crucial for its performance.In this study,a centrifuge modeling test was carried out to investigate the effect of contact between the key and the aquitard on the migration behavior of contaminants within an SB cutoff wall.The centrifuge was accelerated to 100g(gravitational acceleration)and maintained in-flight for 36 h,equivalent to 41 years of transport time in the prototype.Results showed that the contaminant concentration within the SB wall was higher downstream than in the middle in the thickness direction,and deeper regions exhibited a greater concentration than shallower ones.This concentration distribution indicated that contaminants were transported along the interface between the SB wall and the aquitard,bypassing the base of the SB wall to reach the downstream aquifer rapidly.An improved numerical simulation considering preferential interface migration was performed,which agreed with the centrifuge test results.The simulation results indicated that preferential interface migration,as a defect,significantly accelerated the speed of contaminant migration,reducing the breakthrough time of the SB wall to 1/9 of that without preferential interface migration.展开更多
Soil cement bentonite(SCB)is a common material for constructing vertical cutoff walls to prevent groundwater migration at contaminated industrial sites.However,site contaminants can degrade the durability of the cutof...Soil cement bentonite(SCB)is a common material for constructing vertical cutoff walls to prevent groundwater migration at contaminated industrial sites.However,site contaminants can degrade the durability of the cutoff wall.To enhance its performance,this study developed a silica fume-SCB(SSCB).The macroscopic and microscopic properties of SSCB were assessed by unconfined compressive strength test,variable head permeability test,X-ray diffraction(XRD),scanning electron microscopy(SEM)and nuclear magnetic resonance(NMR)spectroscopy.The correlation between its multi-scale properties was analyzed based on pore characteristics.The results indicate that increasing the silica fume substitution ratio improved SSCB strength,especially in the middle and late curing stages.Moreover,increasing the substitution ratio decreased SSCB permeability coefficient,with a more pronounced effect in earlier curing stages.Silica fume addition also refined SSCB pore structure and reduced its porosity.The fractal dimension was used to quantify SSCB pore structure complexity.Increasing silica fume content reduced small pore fractal dimension in SSCB.Concurrently,SSCB strength increased and SSCB permeability coefficient decreased.The findings of this research will demonstrate the great potential of SSCB backfill for practical applications.展开更多
The purpose of this study is to analyze the impact of upper ocean dynamics on velocity bunching,represented by az-imuthal cutoff wavelength(i.e.,sea surface wind,wave,and current).In this study,over 1400 dual-polarize...The purpose of this study is to analyze the impact of upper ocean dynamics on velocity bunching,represented by az-imuthal cutoff wavelength(i.e.,sea surface wind,wave,and current).In this study,over 1400 dual-polarized(vertical-vertical(VV)and vertical-horizontal(VH))Sentinel-1(S-1)synthetic aperture radar(SAR)images collected in tropical cyclones(TC)are utilized.These images are combined with wind and rain observations from the stepped-frequency microwave radiometer(SFMR),wave simu-lations conducted using a third-generation numerical wave model,WAVEWATCH-III(WW3),and SAR-derived wind information collected from CyclObs winds.The WW3-simulated significant wave height(SWH)is validated against measurements from HY-2B altimeter taken in August and September 2021,yielding a root mean square error(RMSE)of 0.48 m and a correlation coefficient(COR)of 0.88.The SAR-based azimuthal cutoff wavelengths in VV polarization,which quantitatively represent the effect of velocity bunching,are compared with theoretical values calculated using WW3-simulated SWH.A notable relationship is observed between the difference in azimuthal cutoff wavelength and SAR-derived wind speed and WW3-simulated SWH.Analysis results show that the correlation between SAR-based azimuthal cutoff wavelength and SWH is stronger than that with wind and current.Finally,a machine learning algorithm is used to develop an algorithm aimed at simulating the azimuthal cutoff wavelength in TCs,including wind,wave,and incidence angle.This method yields an RMSE of 8.90 m,a COR of 0.91,and a scatter index of 0.04 for VV-polar-ization SAR.展开更多
The experimental research programs of 1950s, to understand the adsorption of CO on W surfaces, changed to ab initio studies in 2000s. The goals were to seek improved practical applications. Most of the studies were ba...The experimental research programs of 1950s, to understand the adsorption of CO on W surfaces, changed to ab initio studies in 2000s. The goals were to seek improved practical applications. Most of the studies were based on density functional theory. Many studies also used programs, such as VASP (Vienna Abinitio simulation package) and CPMD. The computational procedures used plane wave approximations. This needed studies with selection of K points and cutoff energy selection to assure convergence in energy calculations. Observations and analysis of papers published from 2006 to 2022 indicate that the cutoff energies were selected arbitrarily without any needed convergence studies. By selecting a published 2006 paper, this paper has clearly showed that an arbitrary selection of cutoff energy, such as 460 eV, is not in the range of, cutoff energies that assure convergence of energy calculations, with ab initio methods and have indicated correction procedures. .展开更多
Lattice-matched In0.5 Ga0.47 As/In0.52 Al 0.48 As high electron mobility transistors （HEMTs） with a cutoff frequency （ft） as high as 218GHz are reported. This fT is the highest value ever reported for HEMTs in Chi...Lattice-matched In0.5 Ga0.47 As/In0.52 Al 0.48 As high electron mobility transistors （HEMTs） with a cutoff frequency （ft） as high as 218GHz are reported. This fT is the highest value ever reported for HEMTs in China. These devices also demonstrate excellent DC characteristics：the extrinsic transconductance is 980mS/mm and the maximum current density is 870mA/mm. The material structure and all the device fabrication technology in this work were developed by our group.展开更多
Methodologies have been developed for calculating cutoffs of reservoir intervals with production capacity （RIPC） and reservoir intervals with accumulation capacity （RIAC） according to the types of pore throat stru...Methodologies have been developed for calculating cutoffs of reservoir intervals with production capacity （RIPC） and reservoir intervals with accumulation capacity （RIAC） according to the types of pore throat structures and dynamic force by using data from petrophysical analysis, production tests and mercury injection. The data are from clastic reservoirs in the third member （Es3） and the fourth member （Es4） of the Shahejie Formation in the Shengtuo area on the North Slope of the Dongying Sag, Jiyang Depression, China. The method of calculating cutoffs of RIPC is summarized as follows： 1） determination of permeability cutoffs of RIPC; 2） classification of types of pore-throat structures according to mercury injection data and then relating porosity to permeability and determining the relationship between porosity and permeability according to each type of pore-throat structure; and 3） calculating porosity cutoffs of RIPC using established correlation between porosity and permeability according to the type of pore throat structure. The method of calculating cutoffs of RIAC includes： 1） establishing a functional relationship between oil-water interracial tension and formation temperature; 2） calculating limiting values of maximum connected pore-throat radii according to formation temperature and dynamic forces of each reservoir interval; 3） correlating permeability with maximum connected pore-throat radius and then obtaining permeability cutoffs of RIAC; and 4） calculating porosity cutoffs on the basis of permeability cutoffs according to specific correlations, suitable for the type of porethroat structure. The results of this study show that porosity and permeability cutoffs of clastic reservoirs decrease with depth. For a fixed permeability cutoff, the porosity cutoff of R1PC varies because the type of pore throat is different. At a fixed temperature, porosity and permeability cutoffs of RIAC decrease as dynamic force increases. For a fixed permeability cutoff of effective hydrocarbon accumulation, the porosity cutoff also varies with different types of pore throat.展开更多
The European Centre for Medium-Range Weather orology and measurements from the Microwave Limb Forecasts Re-Analysis Interim （ERA-Interim） meteSounder, High Resolution Dynamics Limb Sounder, and Ozone Monitoring Inst...The European Centre for Medium-Range Weather orology and measurements from the Microwave Limb Forecasts Re-Analysis Interim （ERA-Interim） meteSounder, High Resolution Dynamics Limb Sounder, and Ozone Monitoring Instrument onboard the Earth Observing System Aura satellite were applied to analyze the dynamical and chemical features of a cutoff low （COL） event over northeast China in early July 2007. The results showed the polar stratospheric origin of an upper-level warm-core cyclone at 100 300 hPa, associated with a funnel-shaped tropopause intruding into the mid-troposphere just above the COL center. The impacts of the stratospheric intrusion on both column ozone and ozone profiles were investigated using satellite measurements. When the intensity of the COL peaked on 10 July 2007, the total column ozone （TCO） increase reached a maximum （40-70 DU）. This could be dynamically attributed to both the descent of the tropopause （~75%） and the downward transport of stratospheric ozone across the tropopause （~25%）. Analysis of the tropospheric ozone profiles provided evidence for irreversible transport/mixing of ozone-rich stratospheric air across the tropopause near the upper-level front region ahead of the COL center. This ozone intrusion underwent downstream transport by the upper tropospheric winds, leading to further increase in TCO by 12 16 DU over broad regions extending from east China toward the northern Japan Sea via South Korea. Meteorological analysis also showed the precedence of the stratospheric intrusion ahead of the development of cyclones in the middle and lower troposphere.展开更多
Soil-bentonite （SB） vertical slurry cutoff wall is a useful treatment for urban industrial contaminated sites. Due to the clay-heavy metal interaction, significant changes would occur in the engineering behavior of ...Soil-bentonite （SB） vertical slurry cutoff wall is a useful treatment for urban industrial contaminated sites. Due to the clay-heavy metal interaction, significant changes would occur in the engineering behavior of SB cutoff walls. However, previous study is limited to kaolinitic soils or montmorillonitic soils along using solidum chloride and/or calcium chloride as target contaminant. In this work, a series of oedometer tests were conducted to investigate the effects of lead （Pb） on the compressibility and the permeability of kaolin-bentonite （KB） mixtures, a simplified model of in-situ SB cutoff wall backfills. In addition, sedimentation tests were conducted to interpret the mechanism controlling the change of compressibility and permeability from the perspective of soil fabric. The Pb-contaminated KB mixtures for oedometer tests and sedimentation tests were prepared with bentonite contents of 0, 5%, 10%, and 15% by dry mass, and they were mixed with pre-determined volume of lead nitrate solution based on designed Pb concentration and solid-to-solution ratio. The Pb concentration was controlled as 0, 0.1, 0.5, 1.0, 5.0, 10, and 50 mg/g with a solid-to-solution ratio of approximate 0.5. The prepared KB mixtures with bentonite contents of 0, 5%, and 10% were chosen for the sedimentation tests. They were freeze-dried and mixed with DDI with a solid-to-solution ratio of 10 g/100 mL. The results indicate that pH, compressibility, and permeability of KB mixture changed considerably with respect to Pb concentration. It is concluded that the fabric of KB mixture, depending on the particle-particle interaction subjected to different ranges of pH and Pb concentration, governs the sedimentation behavior and permeability. The results of liquid limit （WE） cannot be explained in terms of the sedimentation behavior since it is only ionic-dependent.展开更多
InAsSb epilayers with a cutoff wavelength of 4.8 μm have been successfully grown on InAs substrates by one-step liquid phase epitaxy （LPE） technology. The epilayers were characterized by X-ray diffraction （XRD）, ...InAsSb epilayers with a cutoff wavelength of 4.8 μm have been successfully grown on InAs substrates by one-step liquid phase epitaxy （LPE） technology. The epilayers were characterized by X-ray diffraction （XRD）, Fourier transform infrared （PTIR） transmittance measurements and scanning electron microscopy （SEM）. The influence of different growth conditions on the optical and structural properties of the materials was studied. The results revealed that the good crystalline quality, mirror smooth surface and flat interface of InAsSb epilayers were achieved. They benefited from optimized growth conditions, i.e., sufficient homogeneity of the growth melt and a very slow cooling rate.展开更多
In order to maximize the overall economic gain from a metal mine operation, selection of cutoff grades must consider two important aspects: the time value of money and the spatial variation of the grade distribution i...In order to maximize the overall economic gain from a metal mine operation, selection of cutoff grades must consider two important aspects: the time value of money and the spatial variation of the grade distribution in the deposit. That is, cutoff grade selection must be dynamic with respect to both time and space. A newly developed method that fulfills these requirements is presented. In this method, the deposit or a portion of it under study is divided into "decision units" based on the mining method and sample data. The statistical grade distribution and the grade-tonnage relationship of each decision unit are then computed based on the samples falling in the unit. Each decision unit with its grade-tonnage relationship is considered as a stage in a dynamic programming scheme and the problem is solved by applying a forward dynamic programming based algorithm with an objective function of maximizing the overall net present value (NPV). A software package is developed for the method and applied to an underground copper mine in Africa.展开更多
Artificial chute cutoff can fundamentally eliminate the threat of flood caused by the meandering river,but it significantly changes its morphodynamic characteristics.Channel adjustments after cutoff are rapid,which ma...Artificial chute cutoff can fundamentally eliminate the threat of flood caused by the meandering river,but it significantly changes its morphodynamic characteristics.Channel adjustments after cutoff are rapid,which makes it difficult to study the interaction between river morphology and flow structure only through field measurement.However,numerical simulations can provide insights into the hydrodynamic characteristics after artificial chute cutoffs.In this study,both field measurement and numerical simulation are employed to investigate the flow structure and bed morphology caused by an artificial chute cutoff in Sipaikou area of the Upper Yellow River in 2018.The measured hydrological data provide boundary conditions and initial values for the numerical model.The field measurement results reveal that the concave bank of the study area is severely scoured up to 270 m after the artificial cutoff,and a 20 m deep scour hole and a 2.26 km long pool are formed at the entrance and near the left bank of the chute channel.The numerical simulation results of velocity at typical cross-sections are in good agreement with the measurement results.Flow separation and stagnation zones are observed near the right bank during the low flow conditions(discharge of at least 902 m^(3)/s),but this phenomenon is not seen during larger flow conditions(discharge exceeds 2000 m^(3)/s).Interestingly,flow recirculation zones are also found near the left and right banks of the scour hole.Further,a long flux belt is formed at the scour hole and the pool.Consequently,the impact of the bed topography on the hydrodynamic characteristics is relatively prominent when the discharge is small,while the impact on the river banks and river bed is more noticeable when the water discharge is large.In addition,high shear stress is observed near the left bank at the downstream of the studied area,which indicates that the left bank at the downstream is still being scoured.These results suggest that bank protection measures along the left bank are required to maintain the effectiveness of the artificial chute cutoff.展开更多
In this paper, we first investigate the finite-rank product problems of several Toeplitz operators with quasihomogeneous symbols on the cutoff harmonic Bergman space b_n^2. Next,we characterize finite rank commutators...In this paper, we first investigate the finite-rank product problems of several Toeplitz operators with quasihomogeneous symbols on the cutoff harmonic Bergman space b_n^2. Next,we characterize finite rank commutators and semi-commutators of two Toeplitz operators with quasihomogeneous symbols on b_n^2.展开更多
This paper proposes two simple models, look-up table（LUT） model and empirical model, to directly retrieve significant wave height（Hs） using synthetic aperture radar（SAR） azimuth cutoff（λc）. Both models aim at...This paper proposes two simple models, look-up table（LUT） model and empirical model, to directly retrieve significant wave height（Hs） using synthetic aperture radar（SAR） azimuth cutoff（λc）. Both models aim at C-band VV, HH, VH, and HV single-polarization SAR images. The LUT model relates Hs to λc, while the empirical model relates Hs to both λc and SAR range-to-velocity（β）. The LUT model coefficients are derived by simulation under different sea states and observation conditions, which depend on incidence angle（θ）, wave direction（dw）, and βbut are independent of polarization. The empirical model coefficients are obtained by fitting the collocated data,which only depend on polarization. To fit empirical model coefficients and validate the two models, C-band RADARSAT-2 fine quad-polarization（VV＋HH＋VH＋HV） single-look complex（SLC） SAR images and collocated buoy data are collected. Retrieved Hs, using Yang model and the two models proposed in this paper from four kinds of polarization SAR data, are compared with buoy Hs. Results show that both LUT and empirical models have the capacity of retrieving Hs from C-band RADARSAT-2 co-polarization SAR data, while Yang model is not suitable for these kinds of SAR data. Moreover, the empirical model is also valid for cross-polarization SAR data showing clear ocean wave stripes.展开更多
基金supported by the National Key Research and Development Program of China(No.2018YFC1802304)the National Natural Science Foundation of China(Nos.51988101 and 42077241)the Natural Science Foundation of Zhejiang Province(No.LCZ19E080002),China.
文摘Sand-bentonite(SB)cutoff walls are commonly used as barriers in polluted areas.The embedded part of an SB wall in an aquitard is crucial for its performance.In this study,a centrifuge modeling test was carried out to investigate the effect of contact between the key and the aquitard on the migration behavior of contaminants within an SB cutoff wall.The centrifuge was accelerated to 100g(gravitational acceleration)and maintained in-flight for 36 h,equivalent to 41 years of transport time in the prototype.Results showed that the contaminant concentration within the SB wall was higher downstream than in the middle in the thickness direction,and deeper regions exhibited a greater concentration than shallower ones.This concentration distribution indicated that contaminants were transported along the interface between the SB wall and the aquitard,bypassing the base of the SB wall to reach the downstream aquifer rapidly.An improved numerical simulation considering preferential interface migration was performed,which agreed with the centrifuge test results.The simulation results indicated that preferential interface migration,as a defect,significantly accelerated the speed of contaminant migration,reducing the breakthrough time of the SB wall to 1/9 of that without preferential interface migration.
基金Project(2019YFC1803601)supported by the National Key Research and Development Program of ChinaProject(52274182)supported by the National Natural Science Foundation of China+1 种基金Project(2021zzts0274)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(CX20210295)supported by the Postgraduate Scientific Research Innovation Project of Hunan Province,China。
文摘Soil cement bentonite(SCB)is a common material for constructing vertical cutoff walls to prevent groundwater migration at contaminated industrial sites.However,site contaminants can degrade the durability of the cutoff wall.To enhance its performance,this study developed a silica fume-SCB(SSCB).The macroscopic and microscopic properties of SSCB were assessed by unconfined compressive strength test,variable head permeability test,X-ray diffraction(XRD),scanning electron microscopy(SEM)and nuclear magnetic resonance(NMR)spectroscopy.The correlation between its multi-scale properties was analyzed based on pore characteristics.The results indicate that increasing the silica fume substitution ratio improved SSCB strength,especially in the middle and late curing stages.Moreover,increasing the substitution ratio decreased SSCB permeability coefficient,with a more pronounced effect in earlier curing stages.Silica fume addition also refined SSCB pore structure and reduced its porosity.The fractal dimension was used to quantify SSCB pore structure complexity.Increasing silica fume content reduced small pore fractal dimension in SSCB.Concurrently,SSCB strength increased and SSCB permeability coefficient decreased.The findings of this research will demonstrate the great potential of SSCB backfill for practical applications.
基金supported by the National Natural Science Foundation of China(Nos.42076238,42376174)the Natural Science Foundation of Shanghai(No.23ZR1426900).
文摘The purpose of this study is to analyze the impact of upper ocean dynamics on velocity bunching,represented by az-imuthal cutoff wavelength(i.e.,sea surface wind,wave,and current).In this study,over 1400 dual-polarized(vertical-vertical(VV)and vertical-horizontal(VH))Sentinel-1(S-1)synthetic aperture radar(SAR)images collected in tropical cyclones(TC)are utilized.These images are combined with wind and rain observations from the stepped-frequency microwave radiometer(SFMR),wave simu-lations conducted using a third-generation numerical wave model,WAVEWATCH-III(WW3),and SAR-derived wind information collected from CyclObs winds.The WW3-simulated significant wave height(SWH)is validated against measurements from HY-2B altimeter taken in August and September 2021,yielding a root mean square error(RMSE)of 0.48 m and a correlation coefficient(COR)of 0.88.The SAR-based azimuthal cutoff wavelengths in VV polarization,which quantitatively represent the effect of velocity bunching,are compared with theoretical values calculated using WW3-simulated SWH.A notable relationship is observed between the difference in azimuthal cutoff wavelength and SAR-derived wind speed and WW3-simulated SWH.Analysis results show that the correlation between SAR-based azimuthal cutoff wavelength and SWH is stronger than that with wind and current.Finally,a machine learning algorithm is used to develop an algorithm aimed at simulating the azimuthal cutoff wavelength in TCs,including wind,wave,and incidence angle.This method yields an RMSE of 8.90 m,a COR of 0.91,and a scatter index of 0.04 for VV-polar-ization SAR.
文摘The experimental research programs of 1950s, to understand the adsorption of CO on W surfaces, changed to ab initio studies in 2000s. The goals were to seek improved practical applications. Most of the studies were based on density functional theory. Many studies also used programs, such as VASP (Vienna Abinitio simulation package) and CPMD. The computational procedures used plane wave approximations. This needed studies with selection of K points and cutoff energy selection to assure convergence in energy calculations. Observations and analysis of papers published from 2006 to 2022 indicate that the cutoff energies were selected arbitrarily without any needed convergence studies. By selecting a published 2006 paper, this paper has clearly showed that an arbitrary selection of cutoff energy, such as 460 eV, is not in the range of, cutoff energies that assure convergence of energy calculations, with ab initio methods and have indicated correction procedures. .
文摘Lattice-matched In0.5 Ga0.47 As/In0.52 Al 0.48 As high electron mobility transistors （HEMTs） with a cutoff frequency （ft） as high as 218GHz are reported. This fT is the highest value ever reported for HEMTs in China. These devices also demonstrate excellent DC characteristics：the extrinsic transconductance is 980mS/mm and the maximum current density is 870mA/mm. The material structure and all the device fabrication technology in this work were developed by our group.
基金co-funded by National Natura Science Foundation of China (Grant No. 41102058 Gran No. U1262203)+4 种基金the National Science and Technology Special Grant (No. 2011ZX05006-003)Shandong Natura Science Foundation (Grant No. ZR2011DQ017)the Fundamental Research Funds for the Central Universities (No. 12CX04001A No. 13CX02035A No. 13CX02036A)
文摘Methodologies have been developed for calculating cutoffs of reservoir intervals with production capacity （RIPC） and reservoir intervals with accumulation capacity （RIAC） according to the types of pore throat structures and dynamic force by using data from petrophysical analysis, production tests and mercury injection. The data are from clastic reservoirs in the third member （Es3） and the fourth member （Es4） of the Shahejie Formation in the Shengtuo area on the North Slope of the Dongying Sag, Jiyang Depression, China. The method of calculating cutoffs of RIPC is summarized as follows： 1） determination of permeability cutoffs of RIPC; 2） classification of types of pore-throat structures according to mercury injection data and then relating porosity to permeability and determining the relationship between porosity and permeability according to each type of pore-throat structure; and 3） calculating porosity cutoffs of RIPC using established correlation between porosity and permeability according to the type of pore throat structure. The method of calculating cutoffs of RIAC includes： 1） establishing a functional relationship between oil-water interracial tension and formation temperature; 2） calculating limiting values of maximum connected pore-throat radii according to formation temperature and dynamic forces of each reservoir interval; 3） correlating permeability with maximum connected pore-throat radius and then obtaining permeability cutoffs of RIAC; and 4） calculating porosity cutoffs on the basis of permeability cutoffs according to specific correlations, suitable for the type of porethroat structure. The results of this study show that porosity and permeability cutoffs of clastic reservoirs decrease with depth. For a fixed permeability cutoff, the porosity cutoff of R1PC varies because the type of pore throat is different. At a fixed temperature, porosity and permeability cutoffs of RIAC decrease as dynamic force increases. For a fixed permeability cutoff of effective hydrocarbon accumulation, the porosity cutoff also varies with different types of pore throat.
基金funded by the National Basic Research Program of China (Grant No.2010CB428604)National Science Foundation of China(Grant No. 41105025)+1 种基金the Dragon 3 Programme (ID:10577)Research at Harvard-Smithsonian was funded by NASA and the Smithsonian Institution
文摘The European Centre for Medium-Range Weather orology and measurements from the Microwave Limb Forecasts Re-Analysis Interim （ERA-Interim） meteSounder, High Resolution Dynamics Limb Sounder, and Ozone Monitoring Instrument onboard the Earth Observing System Aura satellite were applied to analyze the dynamical and chemical features of a cutoff low （COL） event over northeast China in early July 2007. The results showed the polar stratospheric origin of an upper-level warm-core cyclone at 100 300 hPa, associated with a funnel-shaped tropopause intruding into the mid-troposphere just above the COL center. The impacts of the stratospheric intrusion on both column ozone and ozone profiles were investigated using satellite measurements. When the intensity of the COL peaked on 10 July 2007, the total column ozone （TCO） increase reached a maximum （40-70 DU）. This could be dynamically attributed to both the descent of the tropopause （~75%） and the downward transport of stratospheric ozone across the tropopause （~25%）. Analysis of the tropospheric ozone profiles provided evidence for irreversible transport/mixing of ozone-rich stratospheric air across the tropopause near the upper-level front region ahead of the COL center. This ozone intrusion underwent downstream transport by the upper tropospheric winds, leading to further increase in TCO by 12 16 DU over broad regions extending from east China toward the northern Japan Sea via South Korea. Meteorological analysis also showed the precedence of the stratospheric intrusion ahead of the development of cyclones in the middle and lower troposphere.
基金Project(51278100) supported by the National Natural Science Foundation of ChinaProjects(BK2010060, BK2012022) supported by the Natural Science Foundation of Jiangsu Province, ChinaProject(103) supported by the Scientific Innovation Research of University Graduate Students of Jiangsu Province, China
文摘Soil-bentonite （SB） vertical slurry cutoff wall is a useful treatment for urban industrial contaminated sites. Due to the clay-heavy metal interaction, significant changes would occur in the engineering behavior of SB cutoff walls. However, previous study is limited to kaolinitic soils or montmorillonitic soils along using solidum chloride and/or calcium chloride as target contaminant. In this work, a series of oedometer tests were conducted to investigate the effects of lead （Pb） on the compressibility and the permeability of kaolin-bentonite （KB） mixtures, a simplified model of in-situ SB cutoff wall backfills. In addition, sedimentation tests were conducted to interpret the mechanism controlling the change of compressibility and permeability from the perspective of soil fabric. The Pb-contaminated KB mixtures for oedometer tests and sedimentation tests were prepared with bentonite contents of 0, 5%, 10%, and 15% by dry mass, and they were mixed with pre-determined volume of lead nitrate solution based on designed Pb concentration and solid-to-solution ratio. The Pb concentration was controlled as 0, 0.1, 0.5, 1.0, 5.0, 10, and 50 mg/g with a solid-to-solution ratio of approximate 0.5. The prepared KB mixtures with bentonite contents of 0, 5%, and 10% were chosen for the sedimentation tests. They were freeze-dried and mixed with DDI with a solid-to-solution ratio of 10 g/100 mL. The results indicate that pH, compressibility, and permeability of KB mixture changed considerably with respect to Pb concentration. It is concluded that the fabric of KB mixture, depending on the particle-particle interaction subjected to different ranges of pH and Pb concentration, governs the sedimentation behavior and permeability. The results of liquid limit （WE） cannot be explained in terms of the sedimentation behavior since it is only ionic-dependent.
基金provided by the National Natural Science Foundation of China (No. 60777022)the Program for Young Excellent Tal-ents in Tongji University
文摘InAsSb epilayers with a cutoff wavelength of 4.8 μm have been successfully grown on InAs substrates by one-step liquid phase epitaxy （LPE） technology. The epilayers were characterized by X-ray diffraction （XRD）, Fourier transform infrared （PTIR） transmittance measurements and scanning electron microscopy （SEM）. The influence of different growth conditions on the optical and structural properties of the materials was studied. The results revealed that the good crystalline quality, mirror smooth surface and flat interface of InAsSb epilayers were achieved. They benefited from optimized growth conditions, i.e., sufficient homogeneity of the growth melt and a very slow cooling rate.
基金Project(50974041) supported by the National Natural Science Foundation of China Project(20090450112) supported by the Postdoctoral Foundation of ChinaProject(20093910) supported by the Natural Science Foundation of Liaoning Province, China
文摘In order to maximize the overall economic gain from a metal mine operation, selection of cutoff grades must consider two important aspects: the time value of money and the spatial variation of the grade distribution in the deposit. That is, cutoff grade selection must be dynamic with respect to both time and space. A newly developed method that fulfills these requirements is presented. In this method, the deposit or a portion of it under study is divided into "decision units" based on the mining method and sample data. The statistical grade distribution and the grade-tonnage relationship of each decision unit are then computed based on the samples falling in the unit. Each decision unit with its grade-tonnage relationship is considered as a stage in a dynamic programming scheme and the problem is solved by applying a forward dynamic programming based algorithm with an objective function of maximizing the overall net present value (NPV). A software package is developed for the method and applied to an underground copper mine in Africa.
基金This work was supported mainly by the National Natural Science Foundation of China(Grants No.11761005 and 11861003)partly supported by Key Research&Development Plan Projects of the Science and Technology Department of Ningxia Autonomous Region(Grant No.2019BEG03048)+1 种基金the Natural Science Foundation of Ningxia Province(Grants No.2021AAC03096,2021AAC03206 and 2020AAC03254)Science Research Project of Ningxia(Grant No.NGY2020009).
文摘Artificial chute cutoff can fundamentally eliminate the threat of flood caused by the meandering river,but it significantly changes its morphodynamic characteristics.Channel adjustments after cutoff are rapid,which makes it difficult to study the interaction between river morphology and flow structure only through field measurement.However,numerical simulations can provide insights into the hydrodynamic characteristics after artificial chute cutoffs.In this study,both field measurement and numerical simulation are employed to investigate the flow structure and bed morphology caused by an artificial chute cutoff in Sipaikou area of the Upper Yellow River in 2018.The measured hydrological data provide boundary conditions and initial values for the numerical model.The field measurement results reveal that the concave bank of the study area is severely scoured up to 270 m after the artificial cutoff,and a 20 m deep scour hole and a 2.26 km long pool are formed at the entrance and near the left bank of the chute channel.The numerical simulation results of velocity at typical cross-sections are in good agreement with the measurement results.Flow separation and stagnation zones are observed near the right bank during the low flow conditions(discharge of at least 902 m^(3)/s),but this phenomenon is not seen during larger flow conditions(discharge exceeds 2000 m^(3)/s).Interestingly,flow recirculation zones are also found near the left and right banks of the scour hole.Further,a long flux belt is formed at the scour hole and the pool.Consequently,the impact of the bed topography on the hydrodynamic characteristics is relatively prominent when the discharge is small,while the impact on the river banks and river bed is more noticeable when the water discharge is large.In addition,high shear stress is observed near the left bank at the downstream of the studied area,which indicates that the left bank at the downstream is still being scoured.These results suggest that bank protection measures along the left bank are required to maintain the effectiveness of the artificial chute cutoff.
基金Supported by National Natural Science Foundation of China(Grant No.11761006)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(Grant Nos.2017MS0113,2018MS01026)the Scientific Research Foundation of Higher School of Inner Mongolia Autonomous Region of China(Grant No.NJZY17300).
文摘In this paper, we first investigate the finite-rank product problems of several Toeplitz operators with quasihomogeneous symbols on the cutoff harmonic Bergman space b_n^2. Next,we characterize finite rank commutators and semi-commutators of two Toeplitz operators with quasihomogeneous symbols on b_n^2.
基金The National Natural Science Youth Foundation of China under contract Nos 41306191 and 41306192the National High Technology Research and Development Program of China(863 Program)of China under contract No.2013AA09A505the Scientific Research Fund of the Second Institute of Oceanography,State Oceanic Administration of China under contract No.JG1317
文摘This paper proposes two simple models, look-up table（LUT） model and empirical model, to directly retrieve significant wave height（Hs） using synthetic aperture radar（SAR） azimuth cutoff（λc）. Both models aim at C-band VV, HH, VH, and HV single-polarization SAR images. The LUT model relates Hs to λc, while the empirical model relates Hs to both λc and SAR range-to-velocity（β）. The LUT model coefficients are derived by simulation under different sea states and observation conditions, which depend on incidence angle（θ）, wave direction（dw）, and βbut are independent of polarization. The empirical model coefficients are obtained by fitting the collocated data,which only depend on polarization. To fit empirical model coefficients and validate the two models, C-band RADARSAT-2 fine quad-polarization（VV＋HH＋VH＋HV） single-look complex（SLC） SAR images and collocated buoy data are collected. Retrieved Hs, using Yang model and the two models proposed in this paper from four kinds of polarization SAR data, are compared with buoy Hs. Results show that both LUT and empirical models have the capacity of retrieving Hs from C-band RADARSAT-2 co-polarization SAR data, while Yang model is not suitable for these kinds of SAR data. Moreover, the empirical model is also valid for cross-polarization SAR data showing clear ocean wave stripes.
