Understanding the effects of temperature on the hydro-mechanical behavior of compacted bentonite is important for performance assessments of bentonitebased buffer,backfill,and sealing systems in deep geological dispos...Understanding the effects of temperature on the hydro-mechanical behavior of compacted bentonite is important for performance assessments of bentonitebased buffer,backfill,and sealing systems in deep geological disposal of high-level radioactive wastes.Motivated by such applications,most past experimental studies were focused on highly compacted and high-quality bentonite.Such degrees of dry densities may not be economically or technically feasible for other emerging applications,including as an alternative material to cement in plugging and abandonment of wells.A bespoke high-pressure high-temperature constant rate of strain(CRS)apparatus was developed for the work reported here to conduct a series of tests for evaluating the hydro-mechanical response of compacted bentonite to elevated temperatures.Experiments were performed with bentonite specimens with high impurity contents at a range of dry densities(1.1,1.4,and 1.7 Mg/m^(3))and temperatures between 20 and 80℃.The results show that temperature increase leads to the decrease of swelling pressure for all studied densities.Larger reductions of swelling pressure were observed with increasing dry densities,suggesting the possibility of a larger exchange of pore water in the microstructure system of the clay.The transfer of water from micropores to macropores at elevated temperatures is shown to be a key controlling process at high-density compacted bentonite by which temperature affects the swelling pressure and hydraulic conductivity.展开更多
Deep geological repository is typically situated at depths ranging from several hundred to 1000 m below ground,making bentonite engineered barrier potentially vulnerable to high water pressure and even inducing hydrau...Deep geological repository is typically situated at depths ranging from several hundred to 1000 m below ground,making bentonite engineered barrier potentially vulnerable to high water pressure and even inducing hydraulic fracturing.This study conducted injection tests on compacted GMZ(Gaomiaozi)bentonite with a self-developed visualization set-up.The objective was to unveil the roles of dry density,water content,and pressurization rate in hydraulic fracturing from the perspective of fracturing macromorphological dynamics and breakthrough characteristics.Moreover,the relationships between breakthrough characteristics and microstructure were examined by MIP(mercury intrusion porosimetry)analysis.Results showed that the fracturing dynamics were characterized by three stages:hydration,cracking,and fracturing stages.Compared to water content and pressurization rate,dry density exerted more pronounced effects on these stages.Increasing dry density can lead to an expansion of circular hydration zone,a more complex cracking network,and a change in fracturing patterns from long and clear to short and fuzzy.In terms of breakthrough characteristics,the breakthrough pressure was positively correlated with dry density and negatively correlated with water content.Interestingly,there is a good and unique logarithmic correlation between the breakthrough pressure and the ratio eM/em of inter-aggregate void ratio and intra-aggregate void ratio,regardless of dry density and water content.Within a certain range(i.e.200-50 kPa/min),breakthrough pressure showed slight dependency on pressurization rate.Nevertheless,an extremely low pressurization rate of 20 kPa/min caused a transition for the specimen from quasi-brittle to plastic state owning to more water infiltration,thereby hindering fracture initiation and propagation.展开更多
Investigation of thermal effects on the strain rate-dependent properties of compacted bentonite is crucial for the long-term safety assessment of deep geological repository for disposal of high-level radioactive waste...Investigation of thermal effects on the strain rate-dependent properties of compacted bentonite is crucial for the long-term safety assessment of deep geological repository for disposal of high-level radioactive waste.In the present work,cylindrical GMZ01 bentonite specimens were compacted with suction-controlled by the vapor equilibrium technique.Then,a series of temperature-and suction-controlled stepwise constant rate of strain(CRS)tests was performed and the rate-dependent compressibility behavior of the highly compacted GMZ01 bentonite was investigated.The plastic compressibility parameterλ,the elastic compressibility parameterκ,the yield stress p0,as well as the viscous parameterαwere determined.Results indicate thatλ,κandαdecrease and p0 increases as suction increases.Upon heating,parametersλ,αand p0 decrease.It is also found that p0 increases linearly with increasing CRS in a double-logarithm coordinate.Based on the experimental results,a viscosity parameterα(s,T)was fitted to capture the effects of suction s and temperature T on the relationship between yield stress and strain rate.Then,an elastic-thermo-viscoplastic model for unsaturated soils was developed to describe the thermal effects on the rate-dependent behavior of highly compacted GMZ01 bentonite.Validation showed that the calculated results agreed well to the measured ones.展开更多
Predicting the gas breakthrough pressure of saturated compacted bentonite is crucial for ensuring the long-term safe operation of deep geological repositories for the disposal of high-level radioactive nuclear wastes....Predicting the gas breakthrough pressure of saturated compacted bentonite is crucial for ensuring the long-term safe operation of deep geological repositories for the disposal of high-level radioactive nuclear wastes.In this work,the swelling pressure,water injection,gas injection and mercury intrusion porosimetry(MIP)tests on saturated compacted Gaomiaozi(GMZ)bentonite specimens with a dry density of 1.3 Mg/m^(3),1.4 Mg/m^(3),1.5 Mg/m^(3),1.6 Mg/m^(3) and 1.7 Mg/m^(3) were conducted.Subsequently,the relationships between the swelling pressure and average inter-particle distance,as well as between the gas entry pressure and the maximum effective pore size were analyzed and established.Considering that gas migration and breakthrough are all closely related to the pore structures of the tested geomaterials,a novel gas breakthrough pressure prediction model based on the pore size distribution(PSD)curve was constructed using an existing prediction model based on gas entry pressure and swelling pressure.Finally,based on the test results of the specimens 1.5 Mg/m^(3),1.6 Mg/m^(3) and 1.7 Mg/m^(3),gas breakthrough pressures of the specimens with dry densities of 1.3 Mg/m^(3) and 1.4 Mg/m^(3) were predicted.The results show that the calculated gas breakthrough pressures of 0.76 MPa and 1.28 MPa are very close to the measured values of 0.80 MPa and 1.30 MPa,validating the accuracy of the proposed model.展开更多
The performance of roller compacted concrete(RCC)was greatly influenced by variations in material proportion,optimum moisture content,density of mixes and methodology adopted making it different from conventional conc...The performance of roller compacted concrete(RCC)was greatly influenced by variations in material proportion,optimum moisture content,density of mixes and methodology adopted making it different from conventional concrete mixes.Even though RCC has gained popularity,the complex phenomenon involved in developing the RCC mixes limits it from large-scale applications.In this study,reclaimed asphalt pavement(RAP)incorporated roller-compacted geopolymer concrete(RGC)mixes were developed herein with different compaction techniques such as vibratory hammer(VH),modified proctor(MP),vibration table(VT)and compression machine(CM)are studied and compared with control mixes of natural aggregates.Initially,the effect of alkali solutions such as sodium hydroxide(SH)and sodium silicate(SS)on the physical properties.During,the second phase mechanical properties such as dry density,compressive,flexural and split-tensile strength,modulus of elasticity and microstructure properties will be investigated.The test results revealed that compaction efforts were greatly influenced by the alkali solution.Furthermore,the poor bond characteristics between RAP and the binder matrix had a significant effect on strength properties.Also,the various compaction techniques affected the mechanical properties of mixes developed herein.In Comparison with various compaction efforts,VH and MP produced comparable results,whereas the VT method underestimated and overestimated the various strength properties.Although,the CM method reports comparable results but difficult to maintain consistency in strength aspects.Therefore,optimization of various parameters influencing the concrete properties needs to be achieved for field density.展开更多
In order to assess the performance of the embankment soil under various climate conditions during the period of service, the modulus behaviour of an unsaturated compacted soil is evaluated using the constant water con...In order to assess the performance of the embankment soil under various climate conditions during the period of service, the modulus behaviour of an unsaturated compacted soil is evaluated using the constant water content triaxial test. Since the water content measurement method is simple and economical and it is used widely in engineering, the soil suction is replaced by the water content and the relationship between the water content and the modulus is developed. The compacted samples are prepared with different compacted water contents, and samples with a similar water content subjected to drying or wetting procedures prior to the triaxial test are also investigated. The effect of the water content and the confining pressure on the modulus is analyzed. The results show that the modulus decreases with the increase in the water content and a power function can be proposed to quantitatively describe the relationship between the modulus and the water content in the range of the measured water content. The modulus increases with the increase in the confining pressure of the compacted soil. However, the effect of the water content on the modulus is more pronounced than that of the confining pressure. This research can be referenced for the compacted embankment soil assessment in-service period.展开更多
In general, during the production of compacted graphite iron (CGI), the active residual magnesium reduces and the effect of inoculation fades after magnesium treatment. In this paper, characteristics of the thermal an...In general, during the production of compacted graphite iron (CGI), the active residual magnesium reduces and the effect of inoculation fades after magnesium treatment. In this paper, characteristics of the thermal analysis curve of CGI are compared with those of ductile iron and grey cast iron. The fading effect on the compacted graphite percentage and thermal analysis curve were also studied. Results indicate that the undercooling of CGI is as low as that of ductile iron, but CGI shows evident recalescence. In fading process, the magnesium element acts with oxygen. For a decrease in magnesium content, both the compacted graphite percentage and the austenitic liquidus temperature increase. The temperature of eutectic undercooling (TEU) decreases before the flake graphite appears. After that, TEU increases quickly, up to as high as 20℃, and then gradually decreases. The evolution of recalescence degree is opposite to that of TEU.展开更多
The demands for improved fuel economy,performance and emissions continue to pose challenges for engine designers and the materials they choose. This is particularly true for modern diesel engines,where the primary pat...The demands for improved fuel economy,performance and emissions continue to pose challenges for engine designers and the materials they choose. This is particularly true for modern diesel engines,where the primary path to achieving improved engine performance and emissions is to increase the Peak Firing Pressure in the combustion chamber. The resulting increase in thermal and mechanical loading has required a change from conventional grey cast iron to Compacted Graphite Iron (CGI) in order to satisfy durability requirements without increasing the size or the weight of the engines. With at least 75% higher tensile strength,45% higher stiffness and approximately double the fatigue strength of conventional grey cast iron,CGI satisfies durability requirements and also provides the dimensional stability required to meet emissions legislation throughout the life of the engine. Currently,there are no CGI diesel engines running on the roads in North America. This is set to change considerably as new commercial vehicle and pick-up SUV diesel engines are launched with CGI cylinder blocks in 2008 and 2009. These initial programs will provide over 2 million CGI diesel engines when ramped to mature volume,potentially accounting for 10%-15% of the North American passenger vehicle fleet within the next four years.展开更多
The infl uence of Si, Sn, Mo and Ni on the ductility and thermal conductivity of compacted graphite iron(CGI) was investigated. Metallographic observation and Differential Scanning Calorimetry(DSC) experiments were ca...The infl uence of Si, Sn, Mo and Ni on the ductility and thermal conductivity of compacted graphite iron(CGI) was investigated. Metallographic observation and Differential Scanning Calorimetry(DSC) experiments were carried out to analyze the roles of various additions in the eutectoid reaction. The experimental results showed that the ductility of CGI is proportional to the ferrite fraction, so moderate Si content could dramatically improve the ductility by increasing the ferrite fraction. DSC measurements showed that Mo has moderate inhibition on eutectoid transformation during both the heating and cooling processes, while the sample without Sn obviously broadens the three-phase region. Vermicularity and ferrite are known to improve thermal conductivity, and the former plays a more important role. Besides, among the alloy elements investigated, Sn has the greatest negative effect on conductivity, followed by Ni and Mo having the smallest effects.展开更多
Compacted graphite cast iron （CG1） has been the material for high-power diesel engines recently, but its increased strength causes poor machinability. In this study, coated and uncoated carbide tools were used in dr...Compacted graphite cast iron （CG1） has been the material for high-power diesel engines recently, but its increased strength causes poor machinability. In this study, coated and uncoated carbide tools were used in dry milling experiment and FEM simulation to study the machinability of CGI and wear behaviour of tools. The experimental and FEM simulation results show that coated tool has great advantage in dry milling of CGI. SEM and EDS analysis of tool wear indicate the wear morphology and wear mechanism. Adhesive wear is the main mechanism to cause un- coated tool wear, while abrasive wear and delamination wear are the main mechanism to cause coated tool wear. Stress and temperature distribution in FEM simulation help to understand the wear mechanism including the reason for coat- ing peeled off.展开更多
According to the characteristics of thin-layer rolling and pouting construction technology and the complicated mechanical behavior of the roller compacted concrete dam （RCCD） construction interface, a constitutive m...According to the characteristics of thin-layer rolling and pouting construction technology and the complicated mechanical behavior of the roller compacted concrete dam （RCCD） construction interface, a constitutive model of endochronic damage was established based on the endochronic theory and damage mechanics. The proposed model abandons the traditional concept of elastic-plastic yield surface and can better reflect the real behavior of rolled control concrete. Basic equations were proposed for the fluid-solid coupling analysis, and the relationships among the corresponding key physical parameters were also put forward. One three-dimensional finite element method （FEM） program was obtained by studying the FEM type of the seepage-stress coupling intersection of the RCCD. The method was applied to an actual project, and the results show that the fluid-solid interaction influences dam deformation and dam abutment stability, which is in accordance with practice. Therefore, this model provides a new method for revealing the mechanical behavior of RCCD under the coupling field.展开更多
The characteristics of diffusion are essential to the transport of radionuclides through buffer/backfill materials, such as bentonite, which are commonly found in waste repositories. This study used through-diffusion ...The characteristics of diffusion are essential to the transport of radionuclides through buffer/backfill materials, such as bentonite, which are commonly found in waste repositories. This study used through-diffusion techniques to investigate the diffusion behavior of HTO and ^(99)TcO_4^- on GMZ bentonite of various densities. Diffusion rates were calculated by measuring the diffusion coefficients(De, Da), plotting breakthrough curves and interpreting experiment data. The apparent and effective diffusion coefficients of HTO ranged from(1.68 ± 0.40) 9 × 10^(-11) to(2.80 ± 0.62) 9 × 10^(-11) m^2/s and from(4.61 ±1.28) 9 × 10^(-12) to (16.2 ± 2.50) 9 × 10^(-12) m^2/s, respectively.The apparent and effective diffusion coefficients of^(99)TcO_4^-ranged from(5.26 ± 0.16) 9 × 10^-12to(7.78 ± 0.43) 9× 10^-12m^2/s and from(1.49 ± 0.002) 9 × 10^(-12) to(4.16 ±0.07) 9 × 10^(-12) m^2/s, respectively. The distribution coefficients of HTO and^(99)TcO_4^-ranged from(0.70 ± 0.12) 9× 10^(-2) to(1.36 ± 0.53) 9 × 10^(-2) mL/g and from(1.12 ±0.06) 9 × 10^(-2) to(5.79 ± 2.22) 9 × 10^(-2) mL/g, respectively.The Deand Kdvalues were shown to decrease with an increase in the bulk dry density of compacted bentonite. Our results show that HTO and ^(99)Tc could be considered nonsorbent radionuclides. The data obtained in this studyprovide a valuable reference for the safety assessment of waste repositories.展开更多
This study focuses on the saturated anisotropic hydraulic conductivity of a compacted lateritic clayey sandy soil. The effects of the molding water content and the confining stress on the anisotropic hydraulic conduct...This study focuses on the saturated anisotropic hydraulic conductivity of a compacted lateritic clayey sandy soil. The effects of the molding water content and the confining stress on the anisotropic hydraulic conductivity are investigated. The hydraulic conductivity is measured with a flexible-wall permeameter. Samples are dynamically compacted into the three compaction states of a standard Proctor compaction curve： the dry branch, optimum water content and wet branch. Depending on the molding water content and confining stress, the hydraulic conductivity may increase or decrease. In addition, the results indicate that, when the samples are compacted to the optimum water content, lower hydraulic conductivity is obtained, except at a confining stress equal to 50 kPa. The increase of the confining stress decreases the hydraulic conductivity for each of the evaluated compaction states. In the wet branch, horizontal hy- draulic conductivity is about 8 times higher than the vertical value. The anisotropic hydraulic conduc- tivities of the dry and wet branches decrease when the confining stress increases, and the opposite is observed in the optimum water content state.展开更多
A melt maintained for hours in a press pour unit allowed the following changes over time from spheroidal graphite to compacted graphite iron by casting thermal cups at regular time intervals.This provided extensive ex...A melt maintained for hours in a press pour unit allowed the following changes over time from spheroidal graphite to compacted graphite iron by casting thermal cups at regular time intervals.This provided extensive experimental information for checking the possibility of simulating solidification of compacted graphite irons by means of a microstructure modelling approach.During solidification,compacted graphite develops very much as lamellar graphite but with much less branching.On this basis,a simulation of the thermal analysis records was developed which considers solidification proceeding in a pseudo binary Fe-C system.The simulated curves were compared with the experimental ones obtained from three representative alloys that cover the whole microstructure change during the holding of the melt.The most relevant result is that the parameter describing branching capability of graphite is the most important for reproducing the minimum eutectic temperature and the recalescence which are so characteristic of the solidification of compacted graphite cast irons.展开更多
The demands for improved engine performance,fuel economy,durability,and lower emissions provide a continual challenge for engine designers.The use of Compacted Graphite Iron(CGI)has been established for successful hig...The demands for improved engine performance,fuel economy,durability,and lower emissions provide a continual challenge for engine designers.The use of Compacted Graphite Iron(CGI)has been established for successful high volume series production in the passenger vehicle,commercial vehicle and industrial power sectors over the last decade.The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes,in China and globally.The production window range for stable CGI is narrow and constantly moving.Therefore,any one step single addition of magnesium alloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings.The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity,without risking the formation of flake graphite.The technology is currently being used in high volume Chinese foundry production.The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.展开更多
The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigat...The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical properties.Compacted graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of ferrite.The peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction tests.The morphology of thermal cracks and 3D profiles of the worn surfaces were also discussed.It is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue resistance.Oxidization of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal cracks.Despite the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear.展开更多
The strength and thermal conductivity of compacted graphite iron(CGI)are crucial performance indicators in its engineering application.The presence of graphite in CGI significantly influences the two properties.In the...The strength and thermal conductivity of compacted graphite iron(CGI)are crucial performance indicators in its engineering application.The presence of graphite in CGI significantly influences the two properties.In the previous studies,graphite in CGI was often described using two-dimensional(2D)morphology.In this study,the three-dimensional(3D)size,shape,and distribution of graphite in CGI were analyzed using X-ray tomography.Based on this,a new method is introduced to calculate the 3D vermicularity and compare it with the 2D vermicularity in terms of tensile properties and thermal conductivity.The results demonstrate that vermicular graphite exhibits greater connectivity in 3D observation compared to 2D observation.Therefore,the calculation method of 3D vermicularity is determined by considering the surface area and volume of the connected graphite.Then a linear relationship between 3 and 2D vermicularity has been observed.By comparing the correlation coefficient,it has been found that the 3D vermicularity offers a more accurate method to establish the relationship among graphite morphology,thermal conductivity and tensile property of CGI.展开更多
To study the influence of construction interfaces on dynamic characteristics of roller compacted concrete dams(RCCDs),mechanical properties of construction interfaces are firstly analyzed. Then, the viscous-spring art...To study the influence of construction interfaces on dynamic characteristics of roller compacted concrete dams(RCCDs),mechanical properties of construction interfaces are firstly analyzed. Then, the viscous-spring artificial boundary(VSAB) is adopted to simulate the radiation damping of their infinite foundations, and based on the Marc software, a simplified seismic motion input method is presented by the equivalent nodal loads. Finally, based on the practical engineering of a RCC gravity dam, effects of radiation damping and construction interfaces on the dynamic characteristics of dams are investigated in detail. Analysis results show that dynamic response of the RCC gravity dam significantly reduces about 25% when the radiation damping of infinite foundation is considered. Hot interfaces and the normal cold interfaces have little influence on the dynamic response of the RCC gravity dam.However, nonlinear fracture along the cold interfaces at the dam heel will occur under the designed earthquake if the cold interfaces are combined poorly. Therefore, to avoid the fractures along the construction interfaces under the potential super earthquakes,combination quality of the RCC layers should be significantly ensured.展开更多
The dynamic characteristics of compacted loess are of great significance to the seismic construction of the Loess Plateau area in Northwest China,where earthquakes frequently occur.To study the change in the dynamic m...The dynamic characteristics of compacted loess are of great significance to the seismic construction of the Loess Plateau area in Northwest China,where earthquakes frequently occur.To study the change in the dynamic modulus of the foundation soil under the combined action of vertical and horizontal earthquakes,a hollow cy-lindrical torsion shear instrument capable of vibrating in four directions was used to perform two-way coupling of compression and torsion of Xi'an compacted loess under different dry density and deviator stress ratios.The results show that increasing the dry density can improve the initial dynamic compression modulus and initial dynamic shear modulus of compacted loess.With an increase in the deviator stress ratio,the initial dynamic compression modulus increases,to a certain extent,but the initial dynamic shear modulus decreases slightly.The dynamic modulus gradually decreases with the development of dynamic strain and tends to be stable,and the dynamic modulus that reaches the same strain increases with an increasing dry density.At the initial stage of dynamic loading,the attenuation of the dynamic shear modulus with the strain development is faster than that of the dynamic compression modulus.Compared with previous research results,it is determined that the dynamic modulus of loess under bidirectional dynamic loading is lower and the attenuation rate is faster than that under single-direction dynamic loading.The deviator stress ratio has a more obvious effect on the dynamic compression modulus.The increase in the deviator stress ratio can increase the dynamic compression modulus,to a certain extent.However,the deviator stress ratio has almost no effect on the dynamic shear modulus,and can therefore be ignored.展开更多
Compacted graphite was obtained using inmold technology.The effect of aluminium on the crystallization process,microstructure,ferrite microhardness,and hardness of compacted graphite iron was studied.The microscopic a...Compacted graphite was obtained using inmold technology.The effect of aluminium on the crystallization process,microstructure,ferrite microhardness,and hardness of compacted graphite iron was studied.The microscopic and diffraction tests were also performed,and the process of cast iron crystallization was also investigated.Results show that aluminium increases the temperature of the eutectic transformation as well as the transformation temperature in the solid state.It is found that aluminium is a graphite forming element in compacted graphite iron(CGI)at a concentration up to 2.4wt.%.When its concentration is higher than 3.1wt.%,aluminium causes the spheroidization of the carbides in eutectoid mixture.It is also demonstrated that in cast iron with an aluminium content higher than^8wt.%,AlFe3C(0.5)phase crystallizes from the liquid.展开更多
基金University of Manchester and the China Scholarship Council,Royal Society,UK,Grant/Award Number:IECNSFC211366National Natural Science Foundation of China,Grant/Award Numbers:5247415,52174133Natural Science Foundation of Jiangsu Province of China,Grant/Award Number:BK20240107。
文摘Understanding the effects of temperature on the hydro-mechanical behavior of compacted bentonite is important for performance assessments of bentonitebased buffer,backfill,and sealing systems in deep geological disposal of high-level radioactive wastes.Motivated by such applications,most past experimental studies were focused on highly compacted and high-quality bentonite.Such degrees of dry densities may not be economically or technically feasible for other emerging applications,including as an alternative material to cement in plugging and abandonment of wells.A bespoke high-pressure high-temperature constant rate of strain(CRS)apparatus was developed for the work reported here to conduct a series of tests for evaluating the hydro-mechanical response of compacted bentonite to elevated temperatures.Experiments were performed with bentonite specimens with high impurity contents at a range of dry densities(1.1,1.4,and 1.7 Mg/m^(3))and temperatures between 20 and 80℃.The results show that temperature increase leads to the decrease of swelling pressure for all studied densities.Larger reductions of swelling pressure were observed with increasing dry densities,suggesting the possibility of a larger exchange of pore water in the microstructure system of the clay.The transfer of water from micropores to macropores at elevated temperatures is shown to be a key controlling process at high-density compacted bentonite by which temperature affects the swelling pressure and hydraulic conductivity.
基金supported by the National Natural Science Foundation of China(Grant Nos.42430713 and 42125701)Innovation Program of Shanghai Municipal Education Commission(Grant No.2023ZKZD26)。
文摘Deep geological repository is typically situated at depths ranging from several hundred to 1000 m below ground,making bentonite engineered barrier potentially vulnerable to high water pressure and even inducing hydraulic fracturing.This study conducted injection tests on compacted GMZ(Gaomiaozi)bentonite with a self-developed visualization set-up.The objective was to unveil the roles of dry density,water content,and pressurization rate in hydraulic fracturing from the perspective of fracturing macromorphological dynamics and breakthrough characteristics.Moreover,the relationships between breakthrough characteristics and microstructure were examined by MIP(mercury intrusion porosimetry)analysis.Results showed that the fracturing dynamics were characterized by three stages:hydration,cracking,and fracturing stages.Compared to water content and pressurization rate,dry density exerted more pronounced effects on these stages.Increasing dry density can lead to an expansion of circular hydration zone,a more complex cracking network,and a change in fracturing patterns from long and clear to short and fuzzy.In terms of breakthrough characteristics,the breakthrough pressure was positively correlated with dry density and negatively correlated with water content.Interestingly,there is a good and unique logarithmic correlation between the breakthrough pressure and the ratio eM/em of inter-aggregate void ratio and intra-aggregate void ratio,regardless of dry density and water content.Within a certain range(i.e.200-50 kPa/min),breakthrough pressure showed slight dependency on pressurization rate.Nevertheless,an extremely low pressurization rate of 20 kPa/min caused a transition for the specimen from quasi-brittle to plastic state owning to more water infiltration,thereby hindering fracture initiation and propagation.
基金the support of the National Natural Science Foundation of China(Grant Nos.42030714,42177138 and 41907239).
文摘Investigation of thermal effects on the strain rate-dependent properties of compacted bentonite is crucial for the long-term safety assessment of deep geological repository for disposal of high-level radioactive waste.In the present work,cylindrical GMZ01 bentonite specimens were compacted with suction-controlled by the vapor equilibrium technique.Then,a series of temperature-and suction-controlled stepwise constant rate of strain(CRS)tests was performed and the rate-dependent compressibility behavior of the highly compacted GMZ01 bentonite was investigated.The plastic compressibility parameterλ,the elastic compressibility parameterκ,the yield stress p0,as well as the viscous parameterαwere determined.Results indicate thatλ,κandαdecrease and p0 increases as suction increases.Upon heating,parametersλ,αand p0 decrease.It is also found that p0 increases linearly with increasing CRS in a double-logarithm coordinate.Based on the experimental results,a viscosity parameterα(s,T)was fitted to capture the effects of suction s and temperature T on the relationship between yield stress and strain rate.Then,an elastic-thermo-viscoplastic model for unsaturated soils was developed to describe the thermal effects on the rate-dependent behavior of highly compacted GMZ01 bentonite.Validation showed that the calculated results agreed well to the measured ones.
基金the National Natural Science Foundationof China (Grant No. 42030714).
文摘Predicting the gas breakthrough pressure of saturated compacted bentonite is crucial for ensuring the long-term safe operation of deep geological repositories for the disposal of high-level radioactive nuclear wastes.In this work,the swelling pressure,water injection,gas injection and mercury intrusion porosimetry(MIP)tests on saturated compacted Gaomiaozi(GMZ)bentonite specimens with a dry density of 1.3 Mg/m^(3),1.4 Mg/m^(3),1.5 Mg/m^(3),1.6 Mg/m^(3) and 1.7 Mg/m^(3) were conducted.Subsequently,the relationships between the swelling pressure and average inter-particle distance,as well as between the gas entry pressure and the maximum effective pore size were analyzed and established.Considering that gas migration and breakthrough are all closely related to the pore structures of the tested geomaterials,a novel gas breakthrough pressure prediction model based on the pore size distribution(PSD)curve was constructed using an existing prediction model based on gas entry pressure and swelling pressure.Finally,based on the test results of the specimens 1.5 Mg/m^(3),1.6 Mg/m^(3) and 1.7 Mg/m^(3),gas breakthrough pressures of the specimens with dry densities of 1.3 Mg/m^(3) and 1.4 Mg/m^(3) were predicted.The results show that the calculated gas breakthrough pressures of 0.76 MPa and 1.28 MPa are very close to the measured values of 0.80 MPa and 1.30 MPa,validating the accuracy of the proposed model.
文摘The performance of roller compacted concrete(RCC)was greatly influenced by variations in material proportion,optimum moisture content,density of mixes and methodology adopted making it different from conventional concrete mixes.Even though RCC has gained popularity,the complex phenomenon involved in developing the RCC mixes limits it from large-scale applications.In this study,reclaimed asphalt pavement(RAP)incorporated roller-compacted geopolymer concrete(RGC)mixes were developed herein with different compaction techniques such as vibratory hammer(VH),modified proctor(MP),vibration table(VT)and compression machine(CM)are studied and compared with control mixes of natural aggregates.Initially,the effect of alkali solutions such as sodium hydroxide(SH)and sodium silicate(SS)on the physical properties.During,the second phase mechanical properties such as dry density,compressive,flexural and split-tensile strength,modulus of elasticity and microstructure properties will be investigated.The test results revealed that compaction efforts were greatly influenced by the alkali solution.Furthermore,the poor bond characteristics between RAP and the binder matrix had a significant effect on strength properties.Also,the various compaction techniques affected the mechanical properties of mixes developed herein.In Comparison with various compaction efforts,VH and MP produced comparable results,whereas the VT method underestimated and overestimated the various strength properties.Although,the CM method reports comparable results but difficult to maintain consistency in strength aspects.Therefore,optimization of various parameters influencing the concrete properties needs to be achieved for field density.
基金The Natural Science Foundation of Jiangsu Province(No. BK2011618)
文摘In order to assess the performance of the embankment soil under various climate conditions during the period of service, the modulus behaviour of an unsaturated compacted soil is evaluated using the constant water content triaxial test. Since the water content measurement method is simple and economical and it is used widely in engineering, the soil suction is replaced by the water content and the relationship between the water content and the modulus is developed. The compacted samples are prepared with different compacted water contents, and samples with a similar water content subjected to drying or wetting procedures prior to the triaxial test are also investigated. The effect of the water content and the confining pressure on the modulus is analyzed. The results show that the modulus decreases with the increase in the water content and a power function can be proposed to quantitatively describe the relationship between the modulus and the water content in the range of the measured water content. The modulus increases with the increase in the confining pressure of the compacted soil. However, the effect of the water content on the modulus is more pronounced than that of the confining pressure. This research can be referenced for the compacted embankment soil assessment in-service period.
文摘In general, during the production of compacted graphite iron (CGI), the active residual magnesium reduces and the effect of inoculation fades after magnesium treatment. In this paper, characteristics of the thermal analysis curve of CGI are compared with those of ductile iron and grey cast iron. The fading effect on the compacted graphite percentage and thermal analysis curve were also studied. Results indicate that the undercooling of CGI is as low as that of ductile iron, but CGI shows evident recalescence. In fading process, the magnesium element acts with oxygen. For a decrease in magnesium content, both the compacted graphite percentage and the austenitic liquidus temperature increase. The temperature of eutectic undercooling (TEU) decreases before the flake graphite appears. After that, TEU increases quickly, up to as high as 20℃, and then gradually decreases. The evolution of recalescence degree is opposite to that of TEU.
文摘The demands for improved fuel economy,performance and emissions continue to pose challenges for engine designers and the materials they choose. This is particularly true for modern diesel engines,where the primary path to achieving improved engine performance and emissions is to increase the Peak Firing Pressure in the combustion chamber. The resulting increase in thermal and mechanical loading has required a change from conventional grey cast iron to Compacted Graphite Iron (CGI) in order to satisfy durability requirements without increasing the size or the weight of the engines. With at least 75% higher tensile strength,45% higher stiffness and approximately double the fatigue strength of conventional grey cast iron,CGI satisfies durability requirements and also provides the dimensional stability required to meet emissions legislation throughout the life of the engine. Currently,there are no CGI diesel engines running on the roads in North America. This is set to change considerably as new commercial vehicle and pick-up SUV diesel engines are launched with CGI cylinder blocks in 2008 and 2009. These initial programs will provide over 2 million CGI diesel engines when ramped to mature volume,potentially accounting for 10%-15% of the North American passenger vehicle fleet within the next four years.
文摘The infl uence of Si, Sn, Mo and Ni on the ductility and thermal conductivity of compacted graphite iron(CGI) was investigated. Metallographic observation and Differential Scanning Calorimetry(DSC) experiments were carried out to analyze the roles of various additions in the eutectoid reaction. The experimental results showed that the ductility of CGI is proportional to the ferrite fraction, so moderate Si content could dramatically improve the ductility by increasing the ferrite fraction. DSC measurements showed that Mo has moderate inhibition on eutectoid transformation during both the heating and cooling processes, while the sample without Sn obviously broadens the three-phase region. Vermicularity and ferrite are known to improve thermal conductivity, and the former plays a more important role. Besides, among the alloy elements investigated, Sn has the greatest negative effect on conductivity, followed by Ni and Mo having the smallest effects.
基金Supported by National Natural Science Foundation of China (No. 50935001 and No. U0734007)Important National Science and Technology Specific Projects of China (No.,20011ZX04015-031)+1 种基金National High Technology Research and Development Program of China("863"Program, No. 2009AA04Z150)Major State Basic Research Development Program of China ("973"Program, No. 2010CB731703 and No. 2011CB706804)
文摘Compacted graphite cast iron （CG1） has been the material for high-power diesel engines recently, but its increased strength causes poor machinability. In this study, coated and uncoated carbide tools were used in dry milling experiment and FEM simulation to study the machinability of CGI and wear behaviour of tools. The experimental and FEM simulation results show that coated tool has great advantage in dry milling of CGI. SEM and EDS analysis of tool wear indicate the wear morphology and wear mechanism. Adhesive wear is the main mechanism to cause un- coated tool wear, while abrasive wear and delamination wear are the main mechanism to cause coated tool wear. Stress and temperature distribution in FEM simulation help to understand the wear mechanism including the reason for coat- ing peeled off.
基金Projects(51139001,51179066,51079046,50909041) supported by the National Natural Science Foundation of ChinaProject(NCET-10-0359) supported by the Program for New Century Excellent Talents in UniversityProjects(2009586012,2009586912,2010585212)supported by the Special Fund of State Key Laboratory of China
文摘According to the characteristics of thin-layer rolling and pouting construction technology and the complicated mechanical behavior of the roller compacted concrete dam （RCCD） construction interface, a constitutive model of endochronic damage was established based on the endochronic theory and damage mechanics. The proposed model abandons the traditional concept of elastic-plastic yield surface and can better reflect the real behavior of rolled control concrete. Basic equations were proposed for the fluid-solid coupling analysis, and the relationships among the corresponding key physical parameters were also put forward. One three-dimensional finite element method （FEM） program was obtained by studying the FEM type of the seepage-stress coupling intersection of the RCCD. The method was applied to an actual project, and the results show that the fluid-solid interaction influences dam deformation and dam abutment stability, which is in accordance with practice. Therefore, this model provides a new method for revealing the mechanical behavior of RCCD under the coupling field.
基金the Nuclear Backend Management Department at Taiwan Power Company for financially supporting this research
文摘The characteristics of diffusion are essential to the transport of radionuclides through buffer/backfill materials, such as bentonite, which are commonly found in waste repositories. This study used through-diffusion techniques to investigate the diffusion behavior of HTO and ^(99)TcO_4^- on GMZ bentonite of various densities. Diffusion rates were calculated by measuring the diffusion coefficients(De, Da), plotting breakthrough curves and interpreting experiment data. The apparent and effective diffusion coefficients of HTO ranged from(1.68 ± 0.40) 9 × 10^(-11) to(2.80 ± 0.62) 9 × 10^(-11) m^2/s and from(4.61 ±1.28) 9 × 10^(-12) to (16.2 ± 2.50) 9 × 10^(-12) m^2/s, respectively.The apparent and effective diffusion coefficients of^(99)TcO_4^-ranged from(5.26 ± 0.16) 9 × 10^-12to(7.78 ± 0.43) 9× 10^-12m^2/s and from(1.49 ± 0.002) 9 × 10^(-12) to(4.16 ±0.07) 9 × 10^(-12) m^2/s, respectively. The distribution coefficients of HTO and^(99)TcO_4^-ranged from(0.70 ± 0.12) 9× 10^(-2) to(1.36 ± 0.53) 9 × 10^(-2) mL/g and from(1.12 ±0.06) 9 × 10^(-2) to(5.79 ± 2.22) 9 × 10^(-2) mL/g, respectively.The Deand Kdvalues were shown to decrease with an increase in the bulk dry density of compacted bentonite. Our results show that HTO and ^(99)Tc could be considered nonsorbent radionuclides. The data obtained in this studyprovide a valuable reference for the safety assessment of waste repositories.
文摘This study focuses on the saturated anisotropic hydraulic conductivity of a compacted lateritic clayey sandy soil. The effects of the molding water content and the confining stress on the anisotropic hydraulic conductivity are investigated. The hydraulic conductivity is measured with a flexible-wall permeameter. Samples are dynamically compacted into the three compaction states of a standard Proctor compaction curve： the dry branch, optimum water content and wet branch. Depending on the molding water content and confining stress, the hydraulic conductivity may increase or decrease. In addition, the results indicate that, when the samples are compacted to the optimum water content, lower hydraulic conductivity is obtained, except at a confining stress equal to 50 kPa. The increase of the confining stress decreases the hydraulic conductivity for each of the evaluated compaction states. In the wet branch, horizontal hy- draulic conductivity is about 8 times higher than the vertical value. The anisotropic hydraulic conduc- tivities of the dry and wet branches decrease when the confining stress increases, and the opposite is observed in the optimum water content state.
文摘A melt maintained for hours in a press pour unit allowed the following changes over time from spheroidal graphite to compacted graphite iron by casting thermal cups at regular time intervals.This provided extensive experimental information for checking the possibility of simulating solidification of compacted graphite irons by means of a microstructure modelling approach.During solidification,compacted graphite develops very much as lamellar graphite but with much less branching.On this basis,a simulation of the thermal analysis records was developed which considers solidification proceeding in a pseudo binary Fe-C system.The simulated curves were compared with the experimental ones obtained from three representative alloys that cover the whole microstructure change during the holding of the melt.The most relevant result is that the parameter describing branching capability of graphite is the most important for reproducing the minimum eutectic temperature and the recalescence which are so characteristic of the solidification of compacted graphite cast irons.
文摘The demands for improved engine performance,fuel economy,durability,and lower emissions provide a continual challenge for engine designers.The use of Compacted Graphite Iron(CGI)has been established for successful high volume series production in the passenger vehicle,commercial vehicle and industrial power sectors over the last decade.The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes,in China and globally.The production window range for stable CGI is narrow and constantly moving.Therefore,any one step single addition of magnesium alloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings.The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity,without risking the formation of flake graphite.The technology is currently being used in high volume Chinese foundry production.The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.
基金supported by the Science and Technology Innovation Development Project of Yantai(No.2023ZDX016)。
文摘The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical properties.Compacted graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of ferrite.The peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction tests.The morphology of thermal cracks and 3D profiles of the worn surfaces were also discussed.It is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue resistance.Oxidization of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal cracks.Despite the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear.
基金supported by the National Natural Science Foundation of China(NSFC)under Grant.Nos.51871224 and 52130002the Guangdong Basic and Applied Basic Research Foundation(2021A1515010890).
文摘The strength and thermal conductivity of compacted graphite iron(CGI)are crucial performance indicators in its engineering application.The presence of graphite in CGI significantly influences the two properties.In the previous studies,graphite in CGI was often described using two-dimensional(2D)morphology.In this study,the three-dimensional(3D)size,shape,and distribution of graphite in CGI were analyzed using X-ray tomography.Based on this,a new method is introduced to calculate the 3D vermicularity and compare it with the 2D vermicularity in terms of tensile properties and thermal conductivity.The results demonstrate that vermicular graphite exhibits greater connectivity in 3D observation compared to 2D observation.Therefore,the calculation method of 3D vermicularity is determined by considering the surface area and volume of the connected graphite.Then a linear relationship between 3 and 2D vermicularity has been observed.By comparing the correlation coefficient,it has been found that the 3D vermicularity offers a more accurate method to establish the relationship among graphite morphology,thermal conductivity and tensile property of CGI.
基金Projects(20120094110005,20120094130003)supported by the Research Fund for the Doctoral Program of Higher Education of ChinaProjects(51379068,51139001,51279052,51209077,51179066)supported by the National Natural Science Foundation of China+1 种基金Project(NCET-11-0628)supported by the Program for New Century Excellent Talents in University,ChinaProjects(201201038,201101013)supported by the Public Welfare Industry Research Special Fund Project of Ministry of Water Resources of China
文摘To study the influence of construction interfaces on dynamic characteristics of roller compacted concrete dams(RCCDs),mechanical properties of construction interfaces are firstly analyzed. Then, the viscous-spring artificial boundary(VSAB) is adopted to simulate the radiation damping of their infinite foundations, and based on the Marc software, a simplified seismic motion input method is presented by the equivalent nodal loads. Finally, based on the practical engineering of a RCC gravity dam, effects of radiation damping and construction interfaces on the dynamic characteristics of dams are investigated in detail. Analysis results show that dynamic response of the RCC gravity dam significantly reduces about 25% when the radiation damping of infinite foundation is considered. Hot interfaces and the normal cold interfaces have little influence on the dynamic response of the RCC gravity dam.However, nonlinear fracture along the cold interfaces at the dam heel will occur under the designed earthquake if the cold interfaces are combined poorly. Therefore, to avoid the fractures along the construction interfaces under the potential super earthquakes,combination quality of the RCC layers should be significantly ensured.
基金the National Natural Science Foundation of China(No.41272320,52108342)the Key Scientific Research Projects of Higher Education Institutions in Henan Province,China(No.21A560009).
文摘The dynamic characteristics of compacted loess are of great significance to the seismic construction of the Loess Plateau area in Northwest China,where earthquakes frequently occur.To study the change in the dynamic modulus of the foundation soil under the combined action of vertical and horizontal earthquakes,a hollow cy-lindrical torsion shear instrument capable of vibrating in four directions was used to perform two-way coupling of compression and torsion of Xi'an compacted loess under different dry density and deviator stress ratios.The results show that increasing the dry density can improve the initial dynamic compression modulus and initial dynamic shear modulus of compacted loess.With an increase in the deviator stress ratio,the initial dynamic compression modulus increases,to a certain extent,but the initial dynamic shear modulus decreases slightly.The dynamic modulus gradually decreases with the development of dynamic strain and tends to be stable,and the dynamic modulus that reaches the same strain increases with an increasing dry density.At the initial stage of dynamic loading,the attenuation of the dynamic shear modulus with the strain development is faster than that of the dynamic compression modulus.Compared with previous research results,it is determined that the dynamic modulus of loess under bidirectional dynamic loading is lower and the attenuation rate is faster than that under single-direction dynamic loading.The deviator stress ratio has a more obvious effect on the dynamic compression modulus.The increase in the deviator stress ratio can increase the dynamic compression modulus,to a certain extent.However,the deviator stress ratio has almost no effect on the dynamic shear modulus,and can therefore be ignored.
文摘Compacted graphite was obtained using inmold technology.The effect of aluminium on the crystallization process,microstructure,ferrite microhardness,and hardness of compacted graphite iron was studied.The microscopic and diffraction tests were also performed,and the process of cast iron crystallization was also investigated.Results show that aluminium increases the temperature of the eutectic transformation as well as the transformation temperature in the solid state.It is found that aluminium is a graphite forming element in compacted graphite iron(CGI)at a concentration up to 2.4wt.%.When its concentration is higher than 3.1wt.%,aluminium causes the spheroidization of the carbides in eutectoid mixture.It is also demonstrated that in cast iron with an aluminium content higher than^8wt.%,AlFe3C(0.5)phase crystallizes from the liquid.
