This work investigated the effect of Na_(2)CO_(3)on the char structures of cellulose and lignin,respective-ly,and examined the electrochemi-cal performance of the char by act-ing as an active material for coin cells.T...This work investigated the effect of Na_(2)CO_(3)on the char structures of cellulose and lignin,respective-ly,and examined the electrochemi-cal performance of the char by act-ing as an active material for coin cells.The morphology of char can be significantly steered by the con-centration of Na_(2)CO_(3).Scanning electron microscopy analysis demonstrated that the intro-duction of Na_(2)CO_(3)into cellulose at an appropriate concentration led to the formation of tubular structure on its surface after pyrolysis,whereas the tubular structure was absent in the lignin char with the addition of Na_(2)CO_(3)at any concentrations.X-ray diffraction and Ra-man spectroscopy characterizations revealed that all the obtained chars from both cellulose and lignin,with or without Na_(2)CO_(3),were ascribed to non-crystalline graphite.Nevertheless,the crystal orientation of graphite from cellulose and lignin changed after the catalysis of Na_(2)CO_(3).Further electrochemical tests showed that cellulose char had a higher sodium stor-age capacity than that of lignin char.The excellent electrochemical performance of carbon materials derived from cellulose might hold a prospective application in the field of energy storage.展开更多
In this study,the catalysis function of Na_(2)CO_(3) to the structural properties of xylan char was well investigated with Na_(2)CO_(3) on,and the electrochemical performance of xylan char as an anode material for sod...In this study,the catalysis function of Na_(2)CO_(3) to the structural properties of xylan char was well investigated with Na_(2)CO_(3) on,and the electrochemical performance of xylan char as an anode material for sodium-ion batteries was tested.The characterization of X-ray microscopy and scanning electron microscopy demonstrated that the morphological structure of xylan char was altered due to the addition of Na_(2)CO_(3) catalyst.The increasement of the Na_(2)CO_(3)/xylan ratio resulted in a slenderization of the triangular prism shape of the char skeleton and a reduction in porosity.X-ray diffraction analysis revealed that Na_(2)CO_(3) promoted the growth of the(004)crystal plane of graphite during xylan pyrolysis,while inhibiting the formation of the(100/101)crystal planes.Raman spectroscopy analysis indicated that the presence of Na_(2)CO_(3)had changed the graphitization degree of xylan char.Electrochemical tests further showed that char prepared with a Na_(2)CO_(3)/xylan mass ratio of 1∶1 exhibited the highest sodium storage capacity.This study provides a pathway for the rational design carbon materials derived from xylan for future applications in energy storage devices.展开更多
Catalytic oxidation of NO at room temperature was carried out over nitrogen(N)-doped sludge char(SC)prepared from pyrolysis ofmunicipal sewage sludge,and urea was adopted as nitrogen source.The effects of different N-...Catalytic oxidation of NO at room temperature was carried out over nitrogen(N)-doped sludge char(SC)prepared from pyrolysis ofmunicipal sewage sludge,and urea was adopted as nitrogen source.The effects of different N-doping methods(one-step and two-step method),dried sludge(DS)/urea mass ratios(5:1,4:1,3:1,2:1,and 1:1),SC preparation procedures(pyrolysis only,pyrolysis with acid washing,and pyrolysis with KOH activation and acid washing),and different pyrolysis temperatures(500,600,700,and 800°C)on the catalytic oxidation of NO were compared to optimize the procedure for SC preparation.The results indicated that N-doping could obviously promote the catalytic performance of SC.The one-step method with simultaneous sludge pyrolysis(at 700°C),KOH activation,and N-doping(DS/urea of 3:1)was the optimal procedure for preparing the N-doped SC with the NO conversion rate of 54.7%,whereas the optimal NO conversion rate of SC without N-doping was only 47.3%.Urea worked both as carbon and nitrogen source,which could increase about 2.9%-16.5%of carbon and 24.8%-42.7%of nitrogen content in SC pyrolyzed at 700°C.N-doping significantly promoted microporosity of SC.The optimal N-doped SC showed specific surface areas of 571.38 m^(2)/g,much higher than 374.34 m^(2)/g of the optimal SC without N-doping.In addition,N-doping also increased amorphousness and surface basicity of SC through the formation of N-containing groups.Finally,three reaction paths,i.e.microporous reactor,active sites,and basic site control path,were proposed to explain the mechanism of N-doping on promoting the catalytic performance of NO.展开更多
A novel eco-friendly charring agent(L-OH)was successfully synthesized by combining pentaerythritol(PER)with lignin through a simple two-step reaction.The structure of L-OH was characterized using Fourier transform inf...A novel eco-friendly charring agent(L-OH)was successfully synthesized by combining pentaerythritol(PER)with lignin through a simple two-step reaction.The structure of L-OH was characterized using Fourier transform infrared(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM)and EDS.In addition,L-OH was introduced into polypropylene(PP)together with melamine(MEL)and ammonium polyphosphate(APP)as an intumescent flame retardant(IFRR).The flame retardancy of PP/IFRR composites were investigated using limited oxygen index(LOI),UL-94,thermogravimetric analysis(TGA)and cone calorimeter(CC)test.The experimental results indicate that the PP/IFRR composites pass the V-0 grade of the UL-94 test when the addition amount of IFRR is no less than 20%,and the LOI value of the composite reaches 32.2%at 30%IFRR addition.The peak heat release rate(PHRR)and peak smoke production rate(PSPR)of the composite decrease by 72.8%and 70.4%compared with pure PP,respectively.The flame retardancy mechanism was investigated by TGA,TG-FTIR and residual carbon analysis.These analyses indicate that L-OH can form a more continuous and dense carbon layer during the combustion process,which is the main factor contributing to the improved flame retardancy of PP.展开更多
The carbonization processing(Paozhi)in traditional Chinese medicine(TCM)represents a unique pharmaceutical technology where thermal modification of herbal materials enhances specific therapeutic properties,particularl...The carbonization processing(Paozhi)in traditional Chinese medicine(TCM)represents a unique pharmaceutical technology where thermal modification of herbal materials enhances specific therapeutic properties,particularly hemostatic and antioxidant effects.Despite centuries of empirical applications,the scientific basis underlying these enhanced bioactivities remains poorly characterized,particularly regarding the transformation and functionalization of active components during high-temperature carbonization.This study systematically investigates carbon dots(CDs),emerging carbon-based nanomaterials spontaneously formed during the carbonization process,as potential key bioactive constituents mediating the therapeutic actions of carbonized TCM.Through multidisciplinary analysis of pyrolysis-driven CD formation mechanisms,nanostructural evolution,and surface chemistry modulation,we demonstrate that CDs exhibit size-dependent fluorescence properties and redox-active surface functional groups that correlate with their observed biological effects.Crucially,the study establishes quantitative structure-activity relationships between CDs’quantum confinement characteristics(2–8 nm diameter),oxygencontaining surface moieties(carboxyl,hydroxyl groups),and their procoagulant/antioxidant capacities.By bridging traditional processing knowledge with nanotechnology insights,this work not only deciphers the“black box”of thermal processing in TCM but also proposes a nano-biointerface paradigm for understanding Paozhi mechanisms.The findings advance quality control strategies through CD-based spectral fingerprinting and open new avenues for developing nanoscale TCM derivatives with optimized therapeutic profiles.展开更多
In the current era of renewable energy prominence,the wide operational capacity of coal-fired boilers has emerged as crucial for ensuring the sustainability of power plants.However,attaining ultra-low nitrogen oxides(...In the current era of renewable energy prominence,the wide operational capacity of coal-fired boilers has emerged as crucial for ensuring the sustainability of power plants.However,attaining ultra-low nitrogen oxides(NO_x)emissions during periods of low-load operations presents a significant and persistent challenge for coal power enterprises.While techniques such as biomass re-burning and advanced re-burning have shown promise in enhancing NO reduction effciency above 800℃,their elevated levels of chlorine(Cl)and alkali metals pose potential risks to boiler equipment integrity.Therefore,this study proposes the utilization of biomass char derived from pyrolysis as a dual-purpose solution to enhance NO reduction efficiency while safeguarding boiler integrity during low-load operations.Findings indicate that pyrolysis treatment effectively reduces the Cl and alkali metal content of biomass.Specifically,it was determined that biomass char produced through deeply pyrolysis at 300℃achieves the highest NO reduction efficiency while minimizing the presence of harmful components.At a reduction temperature of 700℃,both re-burning and advanced re-burning techniques exhibit NO reduction efficiencies of 55.90%and 62.22%,which is already an ideal deficiency at low temperatures.The addition of water vapor at 700-800℃obviously avoids the oxidation of ammonia to NO in advanced reburning.Upon further analysis,denitrification efficiency in biomass char re-burning and advanced reburning is influenced not only by volatile content but also by physicochemical properties such as porosity and surface functional group distribution under certain reaction conditions.This study provides a theoretical framework for the industrial implementation of biomass char for NO control in coal-fired power plants,offering insights into optimizing NO reduction efficiency while mitigating potential risks to boiler equipment.展开更多
Improving crop productivity and soil fertility through the balanced application of inorganic and organic nutrient sources is a sustainable approach in modern agriculture.Char land soils,widely distributed in riverine ...Improving crop productivity and soil fertility through the balanced application of inorganic and organic nutrient sources is a sustainable approach in modern agriculture.Char land soils,widely distributed in riverine Bangladesh,are generally low in organic matter status and deficient in necessary nutrient elements for crop production.Addressing this challenge,the present study was conducted to investigate the effects of various organic nutrient sources with inorganic fertilizers on crop yields,nutrient uptake,and soil fertility in farm(L1)and char land(L2)of Brahmaputra River in Mymensingh,Bangladesh from 2022(Y1)to 2023(Y2).For each location,eight treatments viz.T1(Control),T2[100%recommended fertilizer dose(RFD)],T3(75%RFD),T4(75%N from RFD 25%N from cow dung),T5(75%+N from RFD 25%N from poultry manure),T6(75%N from RFD 25%N from vermicompost),T7(75%N from++RFD 25%N from household compost)and T8(75%N from RFD 25%N from rice straw compost)were arranged in++a randomized complete block design with three replications using Wheat–Mungbean–T.Aman rice cropping pattern where three way interaction was considered for results.Treatment T5 performed the best in both years in both locations as it enhanced the yield components(p 0.05)and caused yield increment over control.The yield improvement in<Char land soils was higher than that in farm soils.For all three crops,treatment T5 consistently augmented the uptake of nitrogen,phosphorus,potassium,and sulphur by different parts of the crops and improved soil fertility properties such as organic matter status,cation exchange capacity,total nitrogen,available phosphorus,and sulphur as well as exchangeable potassium in both locations in both years.Cost and return analysis of different treatments for the whole cropping system showed that the highest marginal benefit-cost ratio(16.35 and 15.07)and gross return(about Tk 768,595/ha and 728,341/ha)were obtained from the T5 treatment in farm soils and Char land soils,respectively.Followed by poultry manure,vermicompost performed well in addition to mineral fertilizers for improving crop yield and soil fertility but its economic efficiency was less due to high input cost.These findings may be useful to the smallholder farmers in char areas,who could benefit from increased productivity,reduced reliance on chemical fertilizers,and improved soil health,contributing to the long-term sustainability of char land agriculture.展开更多
The arc ignition based on charring conductive polymers has advantages of simple structure,low ignition power consumption and restart capacity,which bringing it broadly application prospect in hybrid propulsion system ...The arc ignition based on charring conductive polymers has advantages of simple structure,low ignition power consumption and restart capacity,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.In order to optimize the performance of arc ignition system,it is essential to have a deeper understanding of the ignition processes and ignition characteristics of charring conductive polymers.In this paper,the thermal decomposition,electrical conductivity and thermal conductivity characteristics of charring conductive polymers with different conductive additives and matrix materials were comprehensively evaluated.An experimental investigation was conducted to determine the ignition behaviors and characteristics of different charring conductive polymers in a visual ignition combustor.The experiment result showed that the ignition delay and external energy required for ignition are negatively correlated with voltage and initial temperature of the ignition grain,but positively correlated with oxidizer flow velocity.Compared with charring conductive polymers containing multi-walled carbon nanotube,the ignition delay of charring conductive polymers with carbon black is significantly higher and the pyrolysis time is relatively longer.However,the ignition and initial flame propagation of charring conductive polymers with carbon black is more violent and more inclined to carbon particle ignition.Finally,the restart characteristic of different charring conductive polymers was studied.The ignition delay and external energy required for ignition of different charring conductive polymers all reduced with the increasing of the number of ignitions.However,the ignition characteristics would not change a lot after repeated ignition.展开更多
Biochar and bio-oil are produced simultaneously in one pyrolysis process,and they inevitably contact and may interact,influencing the composition of bio-oil and modifying the structure of biochar.In this sense,biochar...Biochar and bio-oil are produced simultaneously in one pyrolysis process,and they inevitably contact and may interact,influencing the composition of bio-oil and modifying the structure of biochar.In this sense,biochar is an inherent catalyst for pyrolysis.In this study,in order to investigate the influence of functionalities and pore structures of biochar on its capability for catalyzing the conversion of homologous volatiles in bio-oil,three char catalysts(600C,800C,and 800AC)produced via pyrolysis of poplar wood at 600 or 800℃or activated at 800℃,were used for catalyzing pyrolysis of homologous poplar wood at 600℃,respectively.The results indicated that the 600C catalyst was more active than 800C and 800AC for catalyzing cracking of volatiles to form more gas(yield increase by 40.2%)and aromatization of volatiles to form more light or heavy phenolics,due to its abundant oxygen-containing functionalities acting as active sites.The developed pores of the 800AC showed no such catalytic effect but could trap some volatiles and allow their further conversion via sufficient aromatization.Nevertheless,the interaction with the volatiles consumed oxygen on 600C(decrease by 50%),enhancing the aromatic degree and increasing thermal stability.The dominance of deposition of carbonaceous material of a very aromatic nature over 800C and 800AC resulted in net weight gain and blocked micropores but formed additional macropores.The in situ diffuse reflectance infrared Fourier transform spectroscopy characterization of the catalytic pyrolysis indicated superior activity of 600C for removal of -OH,while conversion of the intermediates bearing C=O was enhanced over all the char catalysts.展开更多
The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of...The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually.展开更多
Salt marshes are an important blue carbon ecosystem, with surprisingly fast carbon accumulation rates that are 40 times higher than those of terrestrial forests. In recent decades, salt marshes have suffered great deg...Salt marshes are an important blue carbon ecosystem, with surprisingly fast carbon accumulation rates that are 40 times higher than those of terrestrial forests. In recent decades, salt marshes have suffered great degradation and loss all over the world. The idea to enhance carbon stock in salt marshes(so-called blue carbon) using biochar (so-called black carbon) has recently been proposed. Although experiments and observations remain limited, significant enhancements in soil organic carbon and plant growth have been documented in most case studies. However, due to the limited number of observations and their relatively short time window ranging from months to less than one year, there still exists a knowledge gap regarding the process, mechanism, and effect of biochar in enhancing carbon stock in salt marshes. Future research is urgently needed in the following perspectives:1) exploring the relationship between carbon stock enhancement efficiency and biochar properties, 2) optimizing the physical and chemical properties of biochar to boost its efficiency, and 3)studying the in-situ responses of complex carbon pools to biochar addition, especially under tidal conditions and over a longer period of time.展开更多
The purpose of this study is to investigate the catalytic effects of alkali and alkaline earth metallic species （AAEM） on char conversion during the gasification in steam and the changes in ex-situ char reactivity i...The purpose of this study is to investigate the catalytic effects of alkali and alkaline earth metallic species （AAEM） on char conversion during the gasification in steam and the changes in ex-situ char reactivity in oxygen after the gasification in steam using different forms （i.e. H-form, Na-form） of Shengli brown coal. The surface area, AAEM concentration and carbon crystallite of chars were obtained to understand the change in char reactivity. It was found that not only Na concentration and carbon structure were the main factors governing the char reactivity in the atmosphere of steam and oxygen, but also they interacted each other. The presence of Na could facilitate the formation of disordering carbon structure in char, and the amorphous carbon structure would in turn affect the distribution of Na and thus its catalytic performance. The surface area and pore volume had very little relationship with the char＇s reactivity. Addi- tionally, the morphology of chars from different forms of coals were observed using scanning electron microscope （SEM）.展开更多
The biodegradability of chars derived from pyrolysis and hydrothermal carbonisation(HTC) was studied in short-term dynamic incubation experiments under controlled conditions. Carbon dioxide C(CO2) emissions from soil-...The biodegradability of chars derived from pyrolysis and hydrothermal carbonisation(HTC) was studied in short-term dynamic incubation experiments under controlled conditions. Carbon dioxide C(CO2) emissions from soil-char mixtures in combination with solid digestate or mineral nitrogen(N) fertiliser were measured in dynamic chambers for 10 d. Compared to the original material(maize straw), pyrolysis and HTC chars showed significantly lower CO2 emissions and slower decay dynamics; and compared to the soil control, HTC char increased soil respiration to a significant extent, while pyrolysis char did not. The addition of mineral N resulted in a delayed respiration dynamics for HTC char, while the addition of digestate resulted in an increase in the respired CO2 for pyrolysis char and a decrease for HTC char. For the first time, a peculiar two-stage decay kinetics was observed for HTC char,indicating a highly inhomogeneous substrate consisting at least of two C pools.展开更多
Some ablation experiments of Ethylene-Propylene-Diene Monomer(EPDM)insulator were carried out in quasi-static low temperature gas environment,gas-phase environment,two-phase environment with Al2O3 grain and high conce...Some ablation experiments of Ethylene-Propylene-Diene Monomer(EPDM)insulator were carried out in quasi-static low temperature gas environment,gas-phase environment,two-phase environment with Al2O3 grain and high concentration Al2O3 grain gas environments.Their charring ablation rate,thickness,surface morphology and main ingredient of the charring layer were analyzed.The experiment results show that the main influent factors for the charring ablation rate are the gas temperature,grain concentration and state of grain impact;the main influent factors for the charring layer thickness are the gas velocity and environment pressure;and the process of SiO2 migrating in the charring layer occur commonly in different gas environments.They provide a foundation for the ablation mechanism research and modeling of EPDM insulator.展开更多
Pyrolysis temperature and feedstock type used to produce biochar influence the physicochemical properties of the obtained product, which in turn display a range of results when used as soil amendment. From soil carbon...Pyrolysis temperature and feedstock type used to produce biochar influence the physicochemical properties of the obtained product, which in turn display a range of results when used as soil amendment. From soil carbon (C) sequestration strategy to nutrient source, biochar is used to enhance soil properties and to improve agricultural production. However, contrasting effects are observed from biochar application to soil results from a wide range of biochar’s properties in combination with specific environmental conditions. Therefore, elucidation on the effect of pyrolysis conditions and feedstock type on biochar properties may provide basic information to the understanding of soil and biochar interactions. In this study, biochar was produced from four different agricultural organic residues: Poultry litter, sugarcane straw, rice hull and sawdust pyrolysed at final temperatures of 350°C, 450°C, 550°C and 650°C. The effect of temperature and feedstock type on the variability of physicochemical properties of biochars was evaluated through measurements of pH, electrical conductivity, cation exchange capacity, macronutrient content, proximate and elemental analyses, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analyses. Additionally, an incubation trial was carried under controlled conditions to determine the effect of biochar stability on CO2-eq emissions. Results showed that increasing pyrolysis temperature supported biochar stability regardless of feedstock, however, agricultural properties varied widely both as an effect of temperature and feedstock. Animal manure biochar showed higher potential as nutrient source rather than a C sequestration strategy. Improving the knowledge on the influence of pyrolysis temperature and feedstock type on the final properties of biochar will enable the use of better tailored materials that correspond to the expected results while considering its interactions with environmental conditions.展开更多
Non-isothermal method was used to study gasification characteristics of three coal chars and one biomass char.Four chars were made from anthracite coal（A）,bituminous coal（B）,lignite coal（L）,and wood refuse（W）,...Non-isothermal method was used to study gasification characteristics of three coal chars and one biomass char.Four chars were made from anthracite coal（A）,bituminous coal（B）,lignite coal（L）,and wood refuse（W）,respectively.The gasification process was studied by random pore model（RPM）,unreacted core model（URCM）and volumetric model（VM）.With an increase in metamorphic grade,the gasification reactivity of coal char decreased,and the gasification reactivity of biomass char was close to that of low metamorphic coal char.With an increase in heating rate,the gasification of all samples moved towards high temperature zone,and the whole gasification time decreased.It was concluded from kinetics analysis that the above-mentioned three models could be used to describe the gasification process of coal char,and the RPM fitted the best among the three models.In the RPM,the activation energies of gasification were193.9,225.3 and 202.8 kJ/mol for anthracite coal char,bituminous coal char and lignite coal char,respectively.The gasification process of biomass char could be described by the URCM and VM,while the URCM performed better.The activation energy of gasification of wood refuse char calculated by the URCM was 282.0 kJ/mol.展开更多
The combustion behavior of bamboo char and its relationship with particle sizes were evaluated using thermo-gravimetric analysis.The results showed that the combustion properties of bamboo char were much better than t...The combustion behavior of bamboo char and its relationship with particle sizes were evaluated using thermo-gravimetric analysis.The results showed that the combustion properties of bamboo char were much better than those of the anthracite used as a coal injected for blast furnace ironmaking due to its porous structure,disordered microcrystalline and higher catalytic index of ash minerals.When the particle size increased from -0.074 to 0.500-1.000 mm,the ignition temperature and burnout temperature of bamboo char increased,while the combustible index and comprehensive combustion characteristic index decreased slightly.The apparent activation energies of non-isothermal combustion of bamboo char and anthracite were calculated based on the distributed activation energy model.The results showed that the average activation energy was 162.86 kJ/mol for-0.074 mm anthracite,while it ranged from 71.01 to 89.44 kJ/mol for bamboo chars of different sizes.It revealed that the combustion reactivity of bamboo char in the largest size (0.500-1.000 mm)was much better than that of -0.074 mm,anthracite;thus,the size of biomass char could be enlarged to the maximum size specified by the injection application of blast furnace.展开更多
基金supported by Foundation Project of Jihua Laboratory(X200191TL200).
文摘This work investigated the effect of Na_(2)CO_(3)on the char structures of cellulose and lignin,respective-ly,and examined the electrochemi-cal performance of the char by act-ing as an active material for coin cells.The morphology of char can be significantly steered by the con-centration of Na_(2)CO_(3).Scanning electron microscopy analysis demonstrated that the intro-duction of Na_(2)CO_(3)into cellulose at an appropriate concentration led to the formation of tubular structure on its surface after pyrolysis,whereas the tubular structure was absent in the lignin char with the addition of Na_(2)CO_(3)at any concentrations.X-ray diffraction and Ra-man spectroscopy characterizations revealed that all the obtained chars from both cellulose and lignin,with or without Na_(2)CO_(3),were ascribed to non-crystalline graphite.Nevertheless,the crystal orientation of graphite from cellulose and lignin changed after the catalysis of Na_(2)CO_(3).Further electrochemical tests showed that cellulose char had a higher sodium stor-age capacity than that of lignin char.The excellent electrochemical performance of carbon materials derived from cellulose might hold a prospective application in the field of energy storage.
基金supported by the Foundation Project of Jihua Laboratory(X200191TL200).
文摘In this study,the catalysis function of Na_(2)CO_(3) to the structural properties of xylan char was well investigated with Na_(2)CO_(3) on,and the electrochemical performance of xylan char as an anode material for sodium-ion batteries was tested.The characterization of X-ray microscopy and scanning electron microscopy demonstrated that the morphological structure of xylan char was altered due to the addition of Na_(2)CO_(3) catalyst.The increasement of the Na_(2)CO_(3)/xylan ratio resulted in a slenderization of the triangular prism shape of the char skeleton and a reduction in porosity.X-ray diffraction analysis revealed that Na_(2)CO_(3) promoted the growth of the(004)crystal plane of graphite during xylan pyrolysis,while inhibiting the formation of the(100/101)crystal planes.Raman spectroscopy analysis indicated that the presence of Na_(2)CO_(3)had changed the graphitization degree of xylan char.Electrochemical tests further showed that char prepared with a Na_(2)CO_(3)/xylan mass ratio of 1∶1 exhibited the highest sodium storage capacity.This study provides a pathway for the rational design carbon materials derived from xylan for future applications in energy storage devices.
基金supported by Shanghai Pujiang Program(No.22PJD001)the Fundamental Research Funds for the Central Universities(No.2232021G-11).
文摘Catalytic oxidation of NO at room temperature was carried out over nitrogen(N)-doped sludge char(SC)prepared from pyrolysis ofmunicipal sewage sludge,and urea was adopted as nitrogen source.The effects of different N-doping methods(one-step and two-step method),dried sludge(DS)/urea mass ratios(5:1,4:1,3:1,2:1,and 1:1),SC preparation procedures(pyrolysis only,pyrolysis with acid washing,and pyrolysis with KOH activation and acid washing),and different pyrolysis temperatures(500,600,700,and 800°C)on the catalytic oxidation of NO were compared to optimize the procedure for SC preparation.The results indicated that N-doping could obviously promote the catalytic performance of SC.The one-step method with simultaneous sludge pyrolysis(at 700°C),KOH activation,and N-doping(DS/urea of 3:1)was the optimal procedure for preparing the N-doped SC with the NO conversion rate of 54.7%,whereas the optimal NO conversion rate of SC without N-doping was only 47.3%.Urea worked both as carbon and nitrogen source,which could increase about 2.9%-16.5%of carbon and 24.8%-42.7%of nitrogen content in SC pyrolyzed at 700°C.N-doping significantly promoted microporosity of SC.The optimal N-doped SC showed specific surface areas of 571.38 m^(2)/g,much higher than 374.34 m^(2)/g of the optimal SC without N-doping.In addition,N-doping also increased amorphousness and surface basicity of SC through the formation of N-containing groups.Finally,three reaction paths,i.e.microporous reactor,active sites,and basic site control path,were proposed to explain the mechanism of N-doping on promoting the catalytic performance of NO.
基金the equipment support of Sharing Platform of Scientific Equipments,Ministry of Education's Research Center for Comprehensive Utilization and Clean Process Engineering of Phosphrous Resources,Sichuan University。
文摘A novel eco-friendly charring agent(L-OH)was successfully synthesized by combining pentaerythritol(PER)with lignin through a simple two-step reaction.The structure of L-OH was characterized using Fourier transform infrared(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM)and EDS.In addition,L-OH was introduced into polypropylene(PP)together with melamine(MEL)and ammonium polyphosphate(APP)as an intumescent flame retardant(IFRR).The flame retardancy of PP/IFRR composites were investigated using limited oxygen index(LOI),UL-94,thermogravimetric analysis(TGA)and cone calorimeter(CC)test.The experimental results indicate that the PP/IFRR composites pass the V-0 grade of the UL-94 test when the addition amount of IFRR is no less than 20%,and the LOI value of the composite reaches 32.2%at 30%IFRR addition.The peak heat release rate(PHRR)and peak smoke production rate(PSPR)of the composite decrease by 72.8%and 70.4%compared with pure PP,respectively.The flame retardancy mechanism was investigated by TGA,TG-FTIR and residual carbon analysis.These analyses indicate that L-OH can form a more continuous and dense carbon layer during the combustion process,which is the main factor contributing to the improved flame retardancy of PP.
基金supported by the Natural Science Foundation of Shandong Province(No.ZR2023ZD25)the Shandong Province Chinese Medicine Science and Technology Development Project(No.Q-2023107)the Taishan Scholars Project in Shandong Province(Nos.tstp202306 and tsqn202408246).
文摘The carbonization processing(Paozhi)in traditional Chinese medicine(TCM)represents a unique pharmaceutical technology where thermal modification of herbal materials enhances specific therapeutic properties,particularly hemostatic and antioxidant effects.Despite centuries of empirical applications,the scientific basis underlying these enhanced bioactivities remains poorly characterized,particularly regarding the transformation and functionalization of active components during high-temperature carbonization.This study systematically investigates carbon dots(CDs),emerging carbon-based nanomaterials spontaneously formed during the carbonization process,as potential key bioactive constituents mediating the therapeutic actions of carbonized TCM.Through multidisciplinary analysis of pyrolysis-driven CD formation mechanisms,nanostructural evolution,and surface chemistry modulation,we demonstrate that CDs exhibit size-dependent fluorescence properties and redox-active surface functional groups that correlate with their observed biological effects.Crucially,the study establishes quantitative structure-activity relationships between CDs’quantum confinement characteristics(2–8 nm diameter),oxygencontaining surface moieties(carboxyl,hydroxyl groups),and their procoagulant/antioxidant capacities.By bridging traditional processing knowledge with nanotechnology insights,this work not only deciphers the“black box”of thermal processing in TCM but also proposes a nano-biointerface paradigm for understanding Paozhi mechanisms.The findings advance quality control strategies through CD-based spectral fingerprinting and open new avenues for developing nanoscale TCM derivatives with optimized therapeutic profiles.
基金supported by the Open Topics of State Key Laboratory of Clean and Efficient Coal-Fired Power Generation and Pollution Control(D2022FK103)National Natural Science Foundation of China(22278250)+1 种基金the Shanxi Province Science and Technology Cooperation and Exchange Special Program(202104041101014)the Shanxi Province Scholarship Council。
文摘In the current era of renewable energy prominence,the wide operational capacity of coal-fired boilers has emerged as crucial for ensuring the sustainability of power plants.However,attaining ultra-low nitrogen oxides(NO_x)emissions during periods of low-load operations presents a significant and persistent challenge for coal power enterprises.While techniques such as biomass re-burning and advanced re-burning have shown promise in enhancing NO reduction effciency above 800℃,their elevated levels of chlorine(Cl)and alkali metals pose potential risks to boiler equipment integrity.Therefore,this study proposes the utilization of biomass char derived from pyrolysis as a dual-purpose solution to enhance NO reduction efficiency while safeguarding boiler integrity during low-load operations.Findings indicate that pyrolysis treatment effectively reduces the Cl and alkali metal content of biomass.Specifically,it was determined that biomass char produced through deeply pyrolysis at 300℃achieves the highest NO reduction efficiency while minimizing the presence of harmful components.At a reduction temperature of 700℃,both re-burning and advanced re-burning techniques exhibit NO reduction efficiencies of 55.90%and 62.22%,which is already an ideal deficiency at low temperatures.The addition of water vapor at 700-800℃obviously avoids the oxidation of ammonia to NO in advanced reburning.Upon further analysis,denitrification efficiency in biomass char re-burning and advanced reburning is influenced not only by volatile content but also by physicochemical properties such as porosity and surface functional group distribution under certain reaction conditions.This study provides a theoretical framework for the industrial implementation of biomass char for NO control in coal-fired power plants,offering insights into optimizing NO reduction efficiency while mitigating potential risks to boiler equipment.
基金funded by Taif University,Saudi Arabia,Project No.(TU-DSPP-2025-30)The Science and Technology Fellowship Trust(SL No.39.00.0000.035.22.013.19.144)under the Ministry of Science and Technology of Bangladesh partially financed the current research。
文摘Improving crop productivity and soil fertility through the balanced application of inorganic and organic nutrient sources is a sustainable approach in modern agriculture.Char land soils,widely distributed in riverine Bangladesh,are generally low in organic matter status and deficient in necessary nutrient elements for crop production.Addressing this challenge,the present study was conducted to investigate the effects of various organic nutrient sources with inorganic fertilizers on crop yields,nutrient uptake,and soil fertility in farm(L1)and char land(L2)of Brahmaputra River in Mymensingh,Bangladesh from 2022(Y1)to 2023(Y2).For each location,eight treatments viz.T1(Control),T2[100%recommended fertilizer dose(RFD)],T3(75%RFD),T4(75%N from RFD 25%N from cow dung),T5(75%+N from RFD 25%N from poultry manure),T6(75%N from RFD 25%N from vermicompost),T7(75%N from++RFD 25%N from household compost)and T8(75%N from RFD 25%N from rice straw compost)were arranged in++a randomized complete block design with three replications using Wheat–Mungbean–T.Aman rice cropping pattern where three way interaction was considered for results.Treatment T5 performed the best in both years in both locations as it enhanced the yield components(p 0.05)and caused yield increment over control.The yield improvement in<Char land soils was higher than that in farm soils.For all three crops,treatment T5 consistently augmented the uptake of nitrogen,phosphorus,potassium,and sulphur by different parts of the crops and improved soil fertility properties such as organic matter status,cation exchange capacity,total nitrogen,available phosphorus,and sulphur as well as exchangeable potassium in both locations in both years.Cost and return analysis of different treatments for the whole cropping system showed that the highest marginal benefit-cost ratio(16.35 and 15.07)and gross return(about Tk 768,595/ha and 728,341/ha)were obtained from the T5 treatment in farm soils and Char land soils,respectively.Followed by poultry manure,vermicompost performed well in addition to mineral fertilizers for improving crop yield and soil fertility but its economic efficiency was less due to high input cost.These findings may be useful to the smallholder farmers in char areas,who could benefit from increased productivity,reduced reliance on chemical fertilizers,and improved soil health,contributing to the long-term sustainability of char land agriculture.
基金Supported by the Fundamental Research Funds for the Central Universities,China(No.30920041102)the National Natural Science Foundation of China(No.11802134).
文摘The arc ignition based on charring conductive polymers has advantages of simple structure,low ignition power consumption and restart capacity,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.In order to optimize the performance of arc ignition system,it is essential to have a deeper understanding of the ignition processes and ignition characteristics of charring conductive polymers.In this paper,the thermal decomposition,electrical conductivity and thermal conductivity characteristics of charring conductive polymers with different conductive additives and matrix materials were comprehensively evaluated.An experimental investigation was conducted to determine the ignition behaviors and characteristics of different charring conductive polymers in a visual ignition combustor.The experiment result showed that the ignition delay and external energy required for ignition are negatively correlated with voltage and initial temperature of the ignition grain,but positively correlated with oxidizer flow velocity.Compared with charring conductive polymers containing multi-walled carbon nanotube,the ignition delay of charring conductive polymers with carbon black is significantly higher and the pyrolysis time is relatively longer.However,the ignition and initial flame propagation of charring conductive polymers with carbon black is more violent and more inclined to carbon particle ignition.Finally,the restart characteristic of different charring conductive polymers was studied.The ignition delay and external energy required for ignition of different charring conductive polymers all reduced with the increasing of the number of ignitions.However,the ignition characteristics would not change a lot after repeated ignition.
基金supported by the National Natural Science Foundation of China(51876080)the Program for Taishan Scholars of the Shandong Province Government。
文摘Biochar and bio-oil are produced simultaneously in one pyrolysis process,and they inevitably contact and may interact,influencing the composition of bio-oil and modifying the structure of biochar.In this sense,biochar is an inherent catalyst for pyrolysis.In this study,in order to investigate the influence of functionalities and pore structures of biochar on its capability for catalyzing the conversion of homologous volatiles in bio-oil,three char catalysts(600C,800C,and 800AC)produced via pyrolysis of poplar wood at 600 or 800℃or activated at 800℃,were used for catalyzing pyrolysis of homologous poplar wood at 600℃,respectively.The results indicated that the 600C catalyst was more active than 800C and 800AC for catalyzing cracking of volatiles to form more gas(yield increase by 40.2%)and aromatization of volatiles to form more light or heavy phenolics,due to its abundant oxygen-containing functionalities acting as active sites.The developed pores of the 800AC showed no such catalytic effect but could trap some volatiles and allow their further conversion via sufficient aromatization.Nevertheless,the interaction with the volatiles consumed oxygen on 600C(decrease by 50%),enhancing the aromatic degree and increasing thermal stability.The dominance of deposition of carbonaceous material of a very aromatic nature over 800C and 800AC resulted in net weight gain and blocked micropores but formed additional macropores.The in situ diffuse reflectance infrared Fourier transform spectroscopy characterization of the catalytic pyrolysis indicated superior activity of 600C for removal of -OH,while conversion of the intermediates bearing C=O was enhanced over all the char catalysts.
基金the Fundamental Research Funds for the Central Universities(Grant No.30920041102)National Natural Science Foundation of China(Grant No.11802134).
文摘The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually.
基金financial support from the Provincial Natural Science Foundation for Distinguished Young Scientists of Zhejiang,China(No.LR22D06003)the Key Laboratory of Marine Ecological Monitoring and Restoration Technologies of the Ministry of Natural Resources of China(No.MEMRT202102)+2 种基金the Science Foundation of Donghai Laboratory,China(No.DH-2022KF01021)the Fundamental Research Fund for the Central Universities ofChina(No.226-2022-00119)the Funding for ZJU Tang Scholars of China to Xi Xiao。
文摘Salt marshes are an important blue carbon ecosystem, with surprisingly fast carbon accumulation rates that are 40 times higher than those of terrestrial forests. In recent decades, salt marshes have suffered great degradation and loss all over the world. The idea to enhance carbon stock in salt marshes(so-called blue carbon) using biochar (so-called black carbon) has recently been proposed. Although experiments and observations remain limited, significant enhancements in soil organic carbon and plant growth have been documented in most case studies. However, due to the limited number of observations and their relatively short time window ranging from months to less than one year, there still exists a knowledge gap regarding the process, mechanism, and effect of biochar in enhancing carbon stock in salt marshes. Future research is urgently needed in the following perspectives:1) exploring the relationship between carbon stock enhancement efficiency and biochar properties, 2) optimizing the physical and chemical properties of biochar to boost its efficiency, and 3)studying the in-situ responses of complex carbon pools to biochar addition, especially under tidal conditions and over a longer period of time.
文摘The purpose of this study is to investigate the catalytic effects of alkali and alkaline earth metallic species （AAEM） on char conversion during the gasification in steam and the changes in ex-situ char reactivity in oxygen after the gasification in steam using different forms （i.e. H-form, Na-form） of Shengli brown coal. The surface area, AAEM concentration and carbon crystallite of chars were obtained to understand the change in char reactivity. It was found that not only Na concentration and carbon structure were the main factors governing the char reactivity in the atmosphere of steam and oxygen, but also they interacted each other. The presence of Na could facilitate the formation of disordering carbon structure in char, and the amorphous carbon structure would in turn affect the distribution of Na and thus its catalytic performance. The surface area and pore volume had very little relationship with the char＇s reactivity. Addi- tionally, the morphology of chars from different forms of coals were observed using scanning electron microscope （SEM）.
基金performed within the framework of the SAW project "Biochar in Agriculture:Perspectives for Germany and Malaysia" funded by the Leibniz Association,Germany,within the context of the "Joint Initiative for Research and Innovation"
文摘The biodegradability of chars derived from pyrolysis and hydrothermal carbonisation(HTC) was studied in short-term dynamic incubation experiments under controlled conditions. Carbon dioxide C(CO2) emissions from soil-char mixtures in combination with solid digestate or mineral nitrogen(N) fertiliser were measured in dynamic chambers for 10 d. Compared to the original material(maize straw), pyrolysis and HTC chars showed significantly lower CO2 emissions and slower decay dynamics; and compared to the soil control, HTC char increased soil respiration to a significant extent, while pyrolysis char did not. The addition of mineral N resulted in a delayed respiration dynamics for HTC char, while the addition of digestate resulted in an increase in the respired CO2 for pyrolysis char and a decrease for HTC char. For the first time, a peculiar two-stage decay kinetics was observed for HTC char,indicating a highly inhomogeneous substrate consisting at least of two C pools.
基金Sponsored by the National Nature Science Foundation of China(50876091)
文摘Some ablation experiments of Ethylene-Propylene-Diene Monomer(EPDM)insulator were carried out in quasi-static low temperature gas environment,gas-phase environment,two-phase environment with Al2O3 grain and high concentration Al2O3 grain gas environments.Their charring ablation rate,thickness,surface morphology and main ingredient of the charring layer were analyzed.The experiment results show that the main influent factors for the charring ablation rate are the gas temperature,grain concentration and state of grain impact;the main influent factors for the charring layer thickness are the gas velocity and environment pressure;and the process of SiO2 migrating in the charring layer occur commonly in different gas environments.They provide a foundation for the ablation mechanism research and modeling of EPDM insulator.
文摘Pyrolysis temperature and feedstock type used to produce biochar influence the physicochemical properties of the obtained product, which in turn display a range of results when used as soil amendment. From soil carbon (C) sequestration strategy to nutrient source, biochar is used to enhance soil properties and to improve agricultural production. However, contrasting effects are observed from biochar application to soil results from a wide range of biochar’s properties in combination with specific environmental conditions. Therefore, elucidation on the effect of pyrolysis conditions and feedstock type on biochar properties may provide basic information to the understanding of soil and biochar interactions. In this study, biochar was produced from four different agricultural organic residues: Poultry litter, sugarcane straw, rice hull and sawdust pyrolysed at final temperatures of 350°C, 450°C, 550°C and 650°C. The effect of temperature and feedstock type on the variability of physicochemical properties of biochars was evaluated through measurements of pH, electrical conductivity, cation exchange capacity, macronutrient content, proximate and elemental analyses, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analyses. Additionally, an incubation trial was carried under controlled conditions to determine the effect of biochar stability on CO2-eq emissions. Results showed that increasing pyrolysis temperature supported biochar stability regardless of feedstock, however, agricultural properties varied widely both as an effect of temperature and feedstock. Animal manure biochar showed higher potential as nutrient source rather than a C sequestration strategy. Improving the knowledge on the influence of pyrolysis temperature and feedstock type on the final properties of biochar will enable the use of better tailored materials that correspond to the expected results while considering its interactions with environmental conditions.
基金supported by the China Postdoctoral Science Foundation(2016M600043)the Fundamental Research Funds for the Central Universities(FRF-TP-15-063A1)
文摘Non-isothermal method was used to study gasification characteristics of three coal chars and one biomass char.Four chars were made from anthracite coal（A）,bituminous coal（B）,lignite coal（L）,and wood refuse（W）,respectively.The gasification process was studied by random pore model（RPM）,unreacted core model（URCM）and volumetric model（VM）.With an increase in metamorphic grade,the gasification reactivity of coal char decreased,and the gasification reactivity of biomass char was close to that of low metamorphic coal char.With an increase in heating rate,the gasification of all samples moved towards high temperature zone,and the whole gasification time decreased.It was concluded from kinetics analysis that the above-mentioned three models could be used to describe the gasification process of coal char,and the RPM fitted the best among the three models.In the RPM,the activation energies of gasification were193.9,225.3 and 202.8 kJ/mol for anthracite coal char,bituminous coal char and lignite coal char,respectively.The gasification process of biomass char could be described by the URCM and VM,while the URCM performed better.The activation energy of gasification of wood refuse char calculated by the URCM was 282.0 kJ/mol.
基金the financial-support from the China Postdoctoral Science Foundation (2016M602378)National Natural Science Foundation of China (Nos.51704216 and U1760101).
文摘The combustion behavior of bamboo char and its relationship with particle sizes were evaluated using thermo-gravimetric analysis.The results showed that the combustion properties of bamboo char were much better than those of the anthracite used as a coal injected for blast furnace ironmaking due to its porous structure,disordered microcrystalline and higher catalytic index of ash minerals.When the particle size increased from -0.074 to 0.500-1.000 mm,the ignition temperature and burnout temperature of bamboo char increased,while the combustible index and comprehensive combustion characteristic index decreased slightly.The apparent activation energies of non-isothermal combustion of bamboo char and anthracite were calculated based on the distributed activation energy model.The results showed that the average activation energy was 162.86 kJ/mol for-0.074 mm anthracite,while it ranged from 71.01 to 89.44 kJ/mol for bamboo chars of different sizes.It revealed that the combustion reactivity of bamboo char in the largest size (0.500-1.000 mm)was much better than that of -0.074 mm,anthracite;thus,the size of biomass char could be enlarged to the maximum size specified by the injection application of blast furnace.
