期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
我国第一台CG6型单断口6KV电磁接触器
1
作者 钱明华 《电气开关》 1999年第4期4-6,共3页
1CG5高压接触器即将淘汰自我厂1953年投产仿苏的6KV级CG5高压接触器以来,这种接触器就一直占据着我国以空气为绝缘介质的最高电压等级的大容量接触器的第一位置。几十年来,这种接触器在我国的电力拖动领域,特别是矿山... 1CG5高压接触器即将淘汰自我厂1953年投产仿苏的6KV级CG5高压接触器以来,这种接触器就一直占据着我国以空气为绝缘介质的最高电压等级的大容量接触器的第一位置。几十年来,这种接触器在我国的电力拖动领域,特别是矿山提升机拖动方面作出了不小的贡献。但... 展开更多
关键词 电磁接触器 单断口 cg6 接触器
在线阅读 下载PDF
CG6相对重力仪静态漂移特性分析
2
作者 李忠亚 胡敏章 《大地测量与地球动力学》 2026年第2期184-188,共5页
深入认识CG6相对重力仪的静态漂移特性有利于获得高质量的相对重力观测数据。利用三亚地震台相邻2个重力观测墩上的CG6-90相对重力仪和iGrav-56超导重力仪65 h观测数据,设计3种方案计算CG6-90相对重力仪的静态漂移率。结果表明,CG6-90... 深入认识CG6相对重力仪的静态漂移特性有利于获得高质量的相对重力观测数据。利用三亚地震台相邻2个重力观测墩上的CG6-90相对重力仪和iGrav-56超导重力仪65 h观测数据,设计3种方案计算CG6-90相对重力仪的静态漂移率。结果表明,CG6-90相对重力仪的静态线性漂移率为-8.861±0.035μGal/h,仪器观测数据存在-1~1μGal重力变化的非线性漂移现象,并且计算CG6相对重力仪静态漂移率时有必要进行固体潮、海潮和气压变化等因素导致的重力变化改正。 展开更多
关键词 cg6重力仪 静态漂移 iGrav超导重力仪 重力改正 海潮
在线阅读 下载PDF
不同小鼠品系囊胚受体对C57BL/6胚胎干细胞种系嵌合效率的影响 被引量:2
3
作者 周舒雅 左琴 +4 位作者 刘甦苏 王辰飞 李保文 贺争鸣 范昌发 《中国实验动物学报》 CAS CSCD 北大核心 2015年第4期353-358,共6页
目的考察不同品系的小鼠囊胚对C57BL/6胚胎干细胞种系嵌合效率的影响,进而提高通过在C57BL/6胚胎干细胞中同源重组制作基因打靶小鼠的效率。方法选取近交系B6(Cg)-Tyrc-2J和BALB/c品系及封闭群ICR作为囊胚供体鼠,通过在TLX3、Ai3K和SL... 目的考察不同品系的小鼠囊胚对C57BL/6胚胎干细胞种系嵌合效率的影响,进而提高通过在C57BL/6胚胎干细胞中同源重组制作基因打靶小鼠的效率。方法选取近交系B6(Cg)-Tyrc-2J和BALB/c品系及封闭群ICR作为囊胚供体鼠,通过在TLX3、Ai3K和SL三个不同基因修饰ES细胞的种系嵌合实验中,平行比较三者的囊胚利用率、嵌合鼠获得效率以及种系遗传效率等三个方面,并进一步针对囊胚来源这一因素对效率的影响进行统计学分析。结果三种ES细胞均未能通过B6(Cg)-Tyrc-2J品系囊胚的注射获得种系遗传。而BALB/c品系与ICR品系相比,囊胚利用率明显低于ICR品系(P<0.05);嵌合鼠获得效率方面,BALB/c与ICR相当(P=0.115);而种系遗传效率方面,BALB/c品系显著高于其他品系(P<0.01)。结论 BALB/c品系在C57BL/6胚胎干细胞种系嵌合效率方面确实具有优势,然而,由于BALB/c囊胚较难获得,并且存在发育延迟和透明带脆性高等问题,而ICR品系在囊胚获得和利用方面的效率明显高于BABL/c,并且也可以支持C57BL/6胚胎干细胞的种系遗传,因此也是C57BL/6胚胎干细胞囊胚注射中较好的选择。 展开更多
关键词 C57BL/6胚胎干细胞 BALB/c囊胚 ICR囊胚 B6(Cg)-Tyr^c-2J囊胚 种系嵌合效率
在线阅读 下载PDF
Practical Experiences with the First Relative Gravimeter of Type Scintrex CG-6 Autograv in Dubai, The United Arab of Emirates
4
作者 Ossama S. Aly Basem Elsaka Eman A. Al Khatibi 《World Journal of Engineering and Technology》 2020年第2期237-247,共11页
In September 2019, the Dubai Municipality of Dubai Emirate, the United Arab of Emirates, has received its first Scintrex CG-6 Autograv gravity meter. This paper describes the installation and initial gravity signals w... In September 2019, the Dubai Municipality of Dubai Emirate, the United Arab of Emirates, has received its first Scintrex CG-6 Autograv gravity meter. This paper describes the installation and initial gravity signals with the new CG-6 Autograv gravimeter. Two gravity field sites have been selected in Dubai City and Hatta mountainous area. The relative gravity field measurements have been recorded for about one month time span;two weeks in Dubai and two weeks in Hatta. Among different effects reducing the gravity measurements, the tide and drift corrections have been focused on this paper. Two tidal models have been applied to reduce the tide effect based on the automated ETGTAB of the CG-6 gravimeter and ETERNA3.3 software. The results regarding the tide correction show very small discrepancies between both models (ETGTAB and ETERNA3.3) of about 2.2 μGal and 2.6 μGal in terms of standard deviations at Dubai and Hatta gravity stations, respectively. So, the outcome of the precise tidal model of CG-6 Autograv gravimeter is reliable for tidal reduction within Dubai area and its surroundings. Regarding the drift correction, the CG-6 Autograv provides low instrument drift values about 2.44 μGal and -2.35 μGal per day for the Dubai and Hatta stations, respectively. Furthermore, it is recommended that the Hatta gravity station would be considered as a stable and trusted gravity site. For Dubai gravity station, the gravity observations are affected by some noises from traffic activities while recording the gravity signal during the working days. Therefore, it is recommended for Dubai gravity station to be measured during the weekends and at nights in order to avoid any noises affecting the CG-6 gravimeter. 展开更多
关键词 TERRESTRIAL Gravity Field Scintrex cg6 Autograv DRIFT Correction
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部