A hybrid Euler/full potential/Lagrangian wake method,based on single-blade simulation,for predicting unsteady aerodynamic flow around helicopter rotors in hover and forward flight has been developed.In this method,an ...A hybrid Euler/full potential/Lagrangian wake method,based on single-blade simulation,for predicting unsteady aerodynamic flow around helicopter rotors in hover and forward flight has been developed.In this method,an Euler solver is used to model the near wake evolution and transonic flow phenomena in the vicinity of the blade,and a full potential equation（FPE） is used to model the isentropic potential flow region far away from the rotor,while the wake effects of other blades and the far wake are incorporated into the flow solution as an induced inflow distribution using a Lagrangian based wake analysis.To further reduce the execution time,the computational fluid dynamics（CFD） solution and rotor wake analysis（including induced velocity up-date） are conducted parallelly,and a load balancing strategy is employed to account for the information exchange between two solvers.By the developed method,several hover and forward-flight cases on Caradonna-Tung and Helishape 7A rotors are per-formed.Good agreements of the loadings on blade surface with available measured data demonstrate the validation of the method.Also,the CPU time required for different computation runs is compared in the paper,and the results show that the pre-sent hybrid method is superior to conventional CFD method in time cost,and will be more efficient with the number of blades increasing.展开更多
In this paper,a high-fidelity computational fluid dynamics(CFD)and rigid body dynamics(RBD)coupled platform for virtual flight simulation is developed to investigate the flight stability of fixed canard dual-spin proj...In this paper,a high-fidelity computational fluid dynamics(CFD)and rigid body dynamics(RBD)coupled platform for virtual flight simulation is developed to investigate the flight stability of fixed canard dual-spin projectile.The platform's reliability is validated by reproducing the characteristic resonance instability of such projectiles.By coupling the solution of the Unsteady Reynolds-Averaged Navier-Stokes equations and the seven-degree-of-freedom RBD equations,the virtual flight simulations of fixed canard dual-spin projectiles at various curvature trajectories are achieved,and the dynamic mechanism of the trajectory following process is analyzed.The instability mechanism of the dynamic instability during trajectory following process of the fixed canard dual-spin projectile is elucidated by simulating the rolling/coning coupled forced motion,and subsequently validated through virtual flight simulations.The findings suggest that an appropriate yaw moment can drive the projectile axis to precession in the tangential direction of the trajectory,thereby enhancing the trajectory following stability.However,the damping of the projectile attains its minimum value when the forward body equilibrium rotational speed(-128 rad/s)is equal to the negative of the fast mode frequency of the projectile.Insufficient damping leads to the fixed canard dual-spin projectile exiting the dynamic stability domain during the trajectory following,resulting in weakly damped instability.Keeping the forward body not rotating or increasing the spin rates to-192 rad/s can enhance the projectile's damping,thereby improving its dynamic stability.展开更多
The value of form factor k at different drafts is important in predicting full-scale total resistance and speed for different types of ships. In the ITTC community, most organizations predict form factor k using a low...The value of form factor k at different drafts is important in predicting full-scale total resistance and speed for different types of ships. In the ITTC community, most organizations predict form factor k using a low-speed model test. However, this method is problematic for ships with bulbous bows and transom. In this article, a Computational Fluid Dynamics(CFD)-based method is introduced to obtain k for different type of ships at different drafts, and a comparison is made between the CFD method and the model test. The results show that the CFD method produces reasonable k values. A grid generating method and turbulence model are briefly discussed in the context of obtaining a consistent k using CFD.展开更多
Spontaneous combustion(sponcom) is one of the issues of concern with the blasting gallery(BG) method of coal mining and has the potential to cause fires, and impact on production and safety, greenhouse gas(GHG) emissi...Spontaneous combustion(sponcom) is one of the issues of concern with the blasting gallery(BG) method of coal mining and has the potential to cause fires, and impact on production and safety, greenhouse gas(GHG) emissions and huge costs involved in controlling the aftermath situations. Some of the research attempts made to prevent and control coal mine fires and spontaneous combustion in thick seams worked with bord and pillar mining methods are presented in this paper. In the study, computational fluid dynamics(CFD) modelling techniques were used to simulate and assess the effects of various mining methods, layouts, designs, and different operational and ventilation parameters on the flow of goaf gases in BG panels. A wide range of parametric studies were conducted to develop proactive strategies to control and prevent ingress of oxygen into the goaf area preventing spontaneous combustion and mine fires.展开更多
对于高超声速飞行器在临近空间形成的连续与稀薄混合流场,DSMC(direct simulation of Monte Carlo)方法需要消耗巨大的计算资源,CFD(computational fluid dynamics)方法,无法对稀薄效应进行准确模拟。在对连续/稀薄耦合数值方法深入研...对于高超声速飞行器在临近空间形成的连续与稀薄混合流场,DSMC(direct simulation of Monte Carlo)方法需要消耗巨大的计算资源,CFD(computational fluid dynamics)方法,无法对稀薄效应进行准确模拟。在对连续/稀薄耦合数值方法深入研究的基础上,提出了一套非结构网格的CFD/DSMC耦合方法。该方法具有通用强、适应性良好的特点,进行耦合计算时对不规则复杂分界面无需进行光滑处理。对超声速圆柱绕流和钝锥体流场进行了模拟,数值结果表明:该方法对不规则分界面和复杂外形具有高度适用性,通过与重叠网格结果进行比较验证了该方法的有效性和计算效率,相较于传统的DSMC方法,计算效率分别提高了2.3倍和3.16倍,具有高效性。展开更多
To find out and improve the flow characteristics inside the intake system of cylinder head,the application of computational fluid dynamics(CFD)in the evaluation and optimization of the reconstructed intake system base...To find out and improve the flow characteristics inside the intake system of cylinder head,the application of computational fluid dynamics(CFD)in the evaluation and optimization of the reconstructed intake system based on slicing reverse method was proposed.The flow characteristics were found out through CFD,and the velocity vector field,pressure field and turbulent kinetic energy field for different valve lifts were discussed,which were in good agreement with experimental data,and the quality of reconstruction was evaluated.In order to improve its flow characteristic,an optimization plan was proposed.The results show that the flow characteristics after optimization are obviously improved.The results can provide a reference for the design and optimization of the intake system of cylinder head.展开更多
基金National Natural Science Foundation of China (10872094)
文摘A hybrid Euler/full potential/Lagrangian wake method,based on single-blade simulation,for predicting unsteady aerodynamic flow around helicopter rotors in hover and forward flight has been developed.In this method,an Euler solver is used to model the near wake evolution and transonic flow phenomena in the vicinity of the blade,and a full potential equation（FPE） is used to model the isentropic potential flow region far away from the rotor,while the wake effects of other blades and the far wake are incorporated into the flow solution as an induced inflow distribution using a Lagrangian based wake analysis.To further reduce the execution time,the computational fluid dynamics（CFD） solution and rotor wake analysis（including induced velocity up-date） are conducted parallelly,and a load balancing strategy is employed to account for the information exchange between two solvers.By the developed method,several hover and forward-flight cases on Caradonna-Tung and Helishape 7A rotors are per-formed.Good agreements of the loadings on blade surface with available measured data demonstrate the validation of the method.Also,the CPU time required for different computation runs is compared in the paper,and the results show that the pre-sent hybrid method is superior to conventional CFD method in time cost,and will be more efficient with the number of blades increasing.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2141254 and U23B6009)。
文摘In this paper,a high-fidelity computational fluid dynamics(CFD)and rigid body dynamics(RBD)coupled platform for virtual flight simulation is developed to investigate the flight stability of fixed canard dual-spin projectile.The platform's reliability is validated by reproducing the characteristic resonance instability of such projectiles.By coupling the solution of the Unsteady Reynolds-Averaged Navier-Stokes equations and the seven-degree-of-freedom RBD equations,the virtual flight simulations of fixed canard dual-spin projectiles at various curvature trajectories are achieved,and the dynamic mechanism of the trajectory following process is analyzed.The instability mechanism of the dynamic instability during trajectory following process of the fixed canard dual-spin projectile is elucidated by simulating the rolling/coning coupled forced motion,and subsequently validated through virtual flight simulations.The findings suggest that an appropriate yaw moment can drive the projectile axis to precession in the tangential direction of the trajectory,thereby enhancing the trajectory following stability.However,the damping of the projectile attains its minimum value when the forward body equilibrium rotational speed(-128 rad/s)is equal to the negative of the fast mode frequency of the projectile.Insufficient damping leads to the fixed canard dual-spin projectile exiting the dynamic stability domain during the trajectory following,resulting in weakly damped instability.Keeping the forward body not rotating or increasing the spin rates to-192 rad/s can enhance the projectile's damping,thereby improving its dynamic stability.
基金Supported by Ministry of Industry and Information(No.K24097)
文摘The value of form factor k at different drafts is important in predicting full-scale total resistance and speed for different types of ships. In the ITTC community, most organizations predict form factor k using a low-speed model test. However, this method is problematic for ships with bulbous bows and transom. In this article, a Computational Fluid Dynamics(CFD)-based method is introduced to obtain k for different type of ships at different drafts, and a comparison is made between the CFD method and the model test. The results show that the CFD method produces reasonable k values. A grid generating method and turbulence model are briefly discussed in the context of obtaining a consistent k using CFD.
文摘Spontaneous combustion(sponcom) is one of the issues of concern with the blasting gallery(BG) method of coal mining and has the potential to cause fires, and impact on production and safety, greenhouse gas(GHG) emissions and huge costs involved in controlling the aftermath situations. Some of the research attempts made to prevent and control coal mine fires and spontaneous combustion in thick seams worked with bord and pillar mining methods are presented in this paper. In the study, computational fluid dynamics(CFD) modelling techniques were used to simulate and assess the effects of various mining methods, layouts, designs, and different operational and ventilation parameters on the flow of goaf gases in BG panels. A wide range of parametric studies were conducted to develop proactive strategies to control and prevent ingress of oxygen into the goaf area preventing spontaneous combustion and mine fires.
文摘对于高超声速飞行器在临近空间形成的连续与稀薄混合流场,DSMC(direct simulation of Monte Carlo)方法需要消耗巨大的计算资源,CFD(computational fluid dynamics)方法,无法对稀薄效应进行准确模拟。在对连续/稀薄耦合数值方法深入研究的基础上,提出了一套非结构网格的CFD/DSMC耦合方法。该方法具有通用强、适应性良好的特点,进行耦合计算时对不规则复杂分界面无需进行光滑处理。对超声速圆柱绕流和钝锥体流场进行了模拟,数值结果表明:该方法对不规则分界面和复杂外形具有高度适用性,通过与重叠网格结果进行比较验证了该方法的有效性和计算效率,相较于传统的DSMC方法,计算效率分别提高了2.3倍和3.16倍,具有高效性。
基金“Strategic Cooperation of Science and Technology between Nanchong City and Southwest Petroleum University 2018” Special Fund Project,China(Nos.18SXHZ0030,18SXHZ0054)
文摘To find out and improve the flow characteristics inside the intake system of cylinder head,the application of computational fluid dynamics(CFD)in the evaluation and optimization of the reconstructed intake system based on slicing reverse method was proposed.The flow characteristics were found out through CFD,and the velocity vector field,pressure field and turbulent kinetic energy field for different valve lifts were discussed,which were in good agreement with experimental data,and the quality of reconstruction was evaluated.In order to improve its flow characteristic,an optimization plan was proposed.The results show that the flow characteristics after optimization are obviously improved.The results can provide a reference for the design and optimization of the intake system of cylinder head.
