In this paper, the CE/SE method is developed to simulate the two- and three-dimensional flow-field of Pulse Detonation Engine (PDE). The conservation equations with stiff source terms for chemical reaction are solved ...In this paper, the CE/SE method is developed to simulate the two- and three-dimensional flow-field of Pulse Detonation Engine (PDE). The conservation equations with stiff source terms for chemical reaction are solved in two steps. The detailed analysis of computational results of a PDE with a single detonation tube and a PDE with five detonation tubes are given in this paper. Complex wave systems are observed inside and outside a PDE. For a PDE with 5 detonation tubes, there is a big bow shock produced from a number of little shocks near the open ends of tubes. A lot of vortexes interact with shocks and a large expansion wave propagates forward and backward with respect to the PDE in a semi-oval shape.展开更多
The method of two-dimensional viscous space-time conservation element and solution element (CE/SE) can be used to calculate the gas-liquid two-phase interior flow field in pulse detonation engine (PDE). In this paper,...The method of two-dimensional viscous space-time conservation element and solution element (CE/SE) can be used to calculate the gas-liquid two-phase interior flow field in pulse detonation engine (PDE). In this paper, the evolution of the detonation wave and the distribution of its physical parameters were analyzed. The numerical results show that the change of axial velocity of gas is the same as that of detonation pressure. The larger the liquid droplet radius is, the longer the time to get stable detonation wave is. The calculated results coincide with the experimented results better.展开更多
An essentially conservative adaptive space time conservation element and solution element （CE/SE） method is pro- posed for the effective simulation of shock-induced instability with low computational cost. Its imple...An essentially conservative adaptive space time conservation element and solution element （CE/SE） method is pro- posed for the effective simulation of shock-induced instability with low computational cost. Its implementation is based on redefined conservation elements （CEs） and solution elements （SEs）, optimized interpolations and a Courant number insensitive CE/SE scheme. This approach is used in two applications, the Woodward double Mach reflection and a two- component Richtmyer-Meshkov instability experiment. This scheme reveals the essential features of the investigated cases, captures small unstable structures, and yields a solution that is consistent with the results from experiments or other high order methods.展开更多
This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s...This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s low-temperature denitrification activity.After identifying optimal preparation parameters via condition screening,multiple characterization techniques-including BET,XRD,XPS,H_(2)-TPR and in situ DRIFTS-were employed to deeply analyze the catalyst’s physicochemical properties and reaction mechanism.Results demonstrated that compared to the impregnation and co-precipitation methods,the Ce-Co_(0.025)/TiO_(2)-SG catalyst(prepared by the sol-gel method with a Co/Ti mass ratio of 0.025)exhibited significantly superior denitrification activity:NO conversion remained stably above 95%in the 225−350℃ temperature range,and it displayed high N_(2) selectivity.Characterization analysis revealed that abundant surface oxygen vacancies,a high proportion of Ce^(3+) species,and prominent acidic sites collectively contributed to enhancing its low-temperature denitrification performance.This work provides reference value for the development of highly efficient low-temperature denitrification catalysts.展开更多
The space-time conservation element and solution element(CE/SE)method is proposed for solving a conservative interface-capturing reducedmodel of compressible two-fluid flows.The flow equations are the bulk equations,c...The space-time conservation element and solution element(CE/SE)method is proposed for solving a conservative interface-capturing reducedmodel of compressible two-fluid flows.The flow equations are the bulk equations,combined with mass and energy equations for one of the two fluids.The latter equation contains a source term for accounting the energy exchange.The one and two-dimensional flow models are numerically investigated in this manuscript.The CE/SE method is capable to accurately capture the sharp propagating wavefronts of the fluids without excessive numerical diffusion or spurious oscillations.In contrast to the existing upwind finite volume schemes,the Riemann solver and reconstruction procedure are not the building block of the suggested method.The method differs from the previous techniques because of global and local flux conservation in a space-time domain without resorting to interpolation or extrapolation.In order to reveal the efficiency and performance of the approach,several numerical test cases are presented.For validation,the results of the current method are compared with other finite volume schemes.展开更多
The effect of synthesis methods on the activity of V/Ce/WTi catalysts was investigated for the selective catalytic reduction（SCR） of NO_x by NH_3. V/Ce/WTi-DP（deposition precipitation） catalyst showed excellent NH...The effect of synthesis methods on the activity of V/Ce/WTi catalysts was investigated for the selective catalytic reduction（SCR） of NO_x by NH_3. V/Ce/WTi-DP（deposition precipitation） catalyst showed excellent NH_3-SCR performance, especially the better medium-temperature activity and the less N_2O formation than V/Ce/WTi-IMP（impregnation）. These catalysts were characterized by X-ray diffraction（XRD）, Brumauer-Emmett-Teller（BET）, X-ray photoelectron spectroscopy（XPS）, temperature-programmed reduction（H_2-TPR）, and in situ DRIFTS techniques. The XPS and H_2-TPR results revealed that V/Ce/WTi-DP exhibited more surface Ce species, higher level of Oα and higher reducibility of Ce species. Reflected by in situ DRIFTS results, the deposition precipitation method（DP） contributed to a greater amount of weakly adsorbed NO_2, monodentate nitrate and NH_3 species with better reactive activity. Meanwhile, the cis-N_2O_2^（2-） species, an intermediate for N_2O formation, was very limited. As a result, these advantages brought about the superior SCR activity and N_2 selectivity for V/Ce/WTi-DP.展开更多
A possible two-dimensional viscous magnetohydrodynamics (MHD) model is applied to investigating the plasma armature in a railgun. The space-time conservation element and solution element (CE/SE) method for solving the...A possible two-dimensional viscous magnetohydrodynamics (MHD) model is applied to investigating the plasma armature in a railgun. The space-time conservation element and solution element (CE/SE) method for solving the coupled Navier-Stokes equations and Maxwell equations was devised. The distributions of physical parameters of the plasma may thus be evaluated. The results show that extremely high pressure can always be observed ahead of the projectile, and the Lorentz force is the main propulsion. The distribution of temperature is in a good agreement with the results predicted by the law of radiation at the boundaries. Due to convection, the circulation patterns of velocity are evident in both the cases considering inviscid and viscous effect. Furthermore, the velocity and acceleration oscillate over time until a new steady state is achieved. This model efficiently captures the salient features of the physical phenomena, and contributes to further studies of MHD problems in plasma armature.展开更多
A one-dimensional pipe flow model of single-cylinder diesel engine is established to investigate the intake and exhaust flow characteristics of diesel engine in the condition of high power density(HPD).A space-lime co...A one-dimensional pipe flow model of single-cylinder diesel engine is established to investigate the intake and exhaust flow characteristics of diesel engine in the condition of high power density(HPD).A space-lime conservation element and solution element(CE/SE)method is used to derive the discrete equations of the partial differential equation for the intake and exhaust systems.The performance parameters of diesel engine with speed of 2100 r/min are simulated.The simulated results are in accordance with the experimental data.The effect of increased power density on charging coefficient is analyzed using a validated model.The results show that the charging coefficient is slowly improved with the increase in intake pressure,and is obviously reduced with the increase in engine speed.展开更多
YAG：Ce3＋ phosphor was prepared by a novel co-precipitation-rheological phase method.The resulting YAG：Ce3＋ phosphor was characterized by X-ray diffraction（XRD）,scanning electron microscopy（SEM） and photolumine...YAG：Ce3＋ phosphor was prepared by a novel co-precipitation-rheological phase method.The resulting YAG：Ce3＋ phosphor was characterized by X-ray diffraction（XRD）,scanning electron microscopy（SEM） and photoluminescent emission spectra.By using acetic acid as solvent,YAG：Ce3＋ powder with small particle size（≤2 μm） was obtained at a relatively lower sintering temperature of 1400 oC.With the content of acetic acid increasing,small particles dissolved and disappeared,but larger particles grew up and changed its shape from spherical to partially rectangular.Meanwhile,the emission intensity of the sample prepared by co-precipitation-rheological phase method was about 43% higher than that of the sample prepared by co-precipitation method.It was assumed that the significant improvement of luminescence was mainly because the rheological phase presented a better diffusion environment,and therefore,a better homogeneity of activators of Ce3＋.展开更多
A series of Ceo.sFeo.30Zr0.20O2 catalysts were prepared by different methods （co-precipitations method, citric acid sol-gel method, impregnation method, physical mixed method, and hydrotherrnal method） and character...A series of Ceo.sFeo.30Zr0.20O2 catalysts were prepared by different methods （co-precipitations method, citric acid sol-gel method, impregnation method, physical mixed method, and hydrotherrnal method） and characterized by X-ray diffraction （XRD）, Raman spectroscopy, Brunauer-Emmett-Teller （BET） and H2-TPR measurements. Potential of the catalysts in the soot oxidation was evaluated in a temperature-programmed oxidation （TPO） apparatus. The results showed that all the Fe3＋ and Zr4＋ were incor- porated into ceria lattice to form a pure Ce-Fe-Zr-O solid solution for the co-precipitation sample, but two kinds of Fe phases ex- isted in the Ce-Fe-Zr-O catalysts prepared by other methods： Fe3＋ incorporated into CeO2 lattice and dispersed Fe2O3 clusters. The free Fe2O3 clusters could improve the activity of catalysts for soot oxidation comparing with the pure Ce-Fe-Zr-O solid solution owing to the synergetic effect between free Fe2O3 and surface oxygen vacancies. In addition, the activity of catalysts strongly relied on the surface reducibility of free Fe2O3 particles. Holding both abundant free Fe2O3 particles and high oxygen vacancy concentration, the hydrothermal Ce0.5Fe0.3Zr0.202 catalyst presented the lowest Ti （251℃, ignition temperature of soot oxidation） and Tm （310 ℃, maximum oxidation rate temperature） for soot combustion （with tight-contact between soot and catalysts） among the five samples. Even after aging at 800 ℃ for 10 h, the Ti and Tm were still relatively low, at 273 and 361 ℃, respectively, indicating high catalytic stability.展开更多
The single crystal scintillating optical fibers acting as the scintillators and light conductors show potential application in scintillating fiber array detectors with high spatial resolution.In this paper we report t...The single crystal scintillating optical fibers acting as the scintillators and light conductors show potential application in scintillating fiber array detectors with high spatial resolution.In this paper we report the growth of 0.2 at%Ce:Y_(3)Al_(5)O_(12) single crystal fiber.The crystalline phase,surface morphology of the axialsection and cro ss-section,optical and scintillation properties of the as-grown fiber were investigated.The Ce:Y_(3)Al_(5)O_(12) single crystal fiber has a pure YAG phase,a uniform distribution of cerium in the axialsection and cross-section surface.Emission spectrum is composed of broad bands ranging from 440 to700 nm.In addition,the single crystal fiber has a high light yield of 26115±2000 photons/MeV,low energy resolution of 9.44%@662 keV and decay time of a fast component of 78 ns and a slow component of 301 ns.The intensity ratio of fast to slow components is roughly 8:1.展开更多
The Cu-Zr-Ce-O catalysts prepared using the coprecipitation method exhibited better catalytic performance for CO selective oxidation. The Cu-Zr-Ce-O catalysts pretreated with different methods were studied by CO-TPR a...The Cu-Zr-Ce-O catalysts prepared using the coprecipitation method exhibited better catalytic performance for CO selective oxidation. The Cu-Zr-Ce-O catalysts pretreated with different methods were studied by CO-TPR and XPS techniques. The results showed that the Cu-Zr-Ce-O catalyst pretreated with oxygen exhibited the best catalytic performance and had the widest operating temperature window, with CO conversion above 99% from 160 to 200 ℃. The O2 pretreatment caused an enrichment of the oxygen storaged on the Cu active species and promoted the conversion of adsorbed oxygen into surface lattice oxygen. It also improved the amount of Cu＋/Cu^2＋ ionic pair, and then facilitated the formation of CuO active species on the catalyst for selective CO oxidation.展开更多
基金The project supported by the National Natural Science Foundation of China(59906005)the Teaching Research Award Program for Outstanding Young Teachers in High Education Institutions of MOE,China
文摘In this paper, the CE/SE method is developed to simulate the two- and three-dimensional flow-field of Pulse Detonation Engine (PDE). The conservation equations with stiff source terms for chemical reaction are solved in two steps. The detailed analysis of computational results of a PDE with a single detonation tube and a PDE with five detonation tubes are given in this paper. Complex wave systems are observed inside and outside a PDE. For a PDE with 5 detonation tubes, there is a big bow shock produced from a number of little shocks near the open ends of tubes. A lot of vortexes interact with shocks and a large expansion wave propagates forward and backward with respect to the PDE in a semi-oval shape.
基金Sponsored by the National Natural Science Foundation of China (10672080)
文摘The method of two-dimensional viscous space-time conservation element and solution element (CE/SE) can be used to calculate the gas-liquid two-phase interior flow field in pulse detonation engine (PDE). In this paper, the evolution of the detonation wave and the distribution of its physical parameters were analyzed. The numerical results show that the change of axial velocity of gas is the same as that of detonation pressure. The larger the liquid droplet radius is, the longer the time to get stable detonation wave is. The calculated results coincide with the experimented results better.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.10732010,10972010,and 11028206)the Opening Project of State Key Laboratory of Explosion Science and Technology,China (Grant No.KFJJ13-5M)
文摘An essentially conservative adaptive space time conservation element and solution element （CE/SE） method is pro- posed for the effective simulation of shock-induced instability with low computational cost. Its implementation is based on redefined conservation elements （CEs） and solution elements （SEs）, optimized interpolations and a Courant number insensitive CE/SE scheme. This approach is used in two applications, the Woodward double Mach reflection and a two- component Richtmyer-Meshkov instability experiment. This scheme reveals the essential features of the investigated cases, captures small unstable structures, and yields a solution that is consistent with the results from experiments or other high order methods.
基金Supported by the National Key Research and Development Program of China (2023YFB4102903)。
文摘This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s low-temperature denitrification activity.After identifying optimal preparation parameters via condition screening,multiple characterization techniques-including BET,XRD,XPS,H_(2)-TPR and in situ DRIFTS-were employed to deeply analyze the catalyst’s physicochemical properties and reaction mechanism.Results demonstrated that compared to the impregnation and co-precipitation methods,the Ce-Co_(0.025)/TiO_(2)-SG catalyst(prepared by the sol-gel method with a Co/Ti mass ratio of 0.025)exhibited significantly superior denitrification activity:NO conversion remained stably above 95%in the 225−350℃ temperature range,and it displayed high N_(2) selectivity.Characterization analysis revealed that abundant surface oxygen vacancies,a high proportion of Ce^(3+) species,and prominent acidic sites collectively contributed to enhancing its low-temperature denitrification performance.This work provides reference value for the development of highly efficient low-temperature denitrification catalysts.
基金supported by Higher Education Commission(HEC)of Pakistan through grant No.1375.
文摘The space-time conservation element and solution element(CE/SE)method is proposed for solving a conservative interface-capturing reducedmodel of compressible two-fluid flows.The flow equations are the bulk equations,combined with mass and energy equations for one of the two fluids.The latter equation contains a source term for accounting the energy exchange.The one and two-dimensional flow models are numerically investigated in this manuscript.The CE/SE method is capable to accurately capture the sharp propagating wavefronts of the fluids without excessive numerical diffusion or spurious oscillations.In contrast to the existing upwind finite volume schemes,the Riemann solver and reconstruction procedure are not the building block of the suggested method.The method differs from the previous techniques because of global and local flux conservation in a space-time domain without resorting to interpolation or extrapolation.In order to reveal the efficiency and performance of the approach,several numerical test cases are presented.For validation,the results of the current method are compared with other finite volume schemes.
基金supported by the Grant from the China Huadian Science and Technology Institute(CHDI.KJ-20)the National High-Tech Research and Development Program of China(863,2011AA03A405)
文摘The effect of synthesis methods on the activity of V/Ce/WTi catalysts was investigated for the selective catalytic reduction（SCR） of NO_x by NH_3. V/Ce/WTi-DP（deposition precipitation） catalyst showed excellent NH_3-SCR performance, especially the better medium-temperature activity and the less N_2O formation than V/Ce/WTi-IMP（impregnation）. These catalysts were characterized by X-ray diffraction（XRD）, Brumauer-Emmett-Teller（BET）, X-ray photoelectron spectroscopy（XPS）, temperature-programmed reduction（H_2-TPR）, and in situ DRIFTS techniques. The XPS and H_2-TPR results revealed that V/Ce/WTi-DP exhibited more surface Ce species, higher level of Oα and higher reducibility of Ce species. Reflected by in situ DRIFTS results, the deposition precipitation method（DP） contributed to a greater amount of weakly adsorbed NO_2, monodentate nitrate and NH_3 species with better reactive activity. Meanwhile, the cis-N_2O_2^（2-） species, an intermediate for N_2O formation, was very limited. As a result, these advantages brought about the superior SCR activity and N_2 selectivity for V/Ce/WTi-DP.
基金Supported by the National Natural Science Foundation of China (Grant No. 10672080)
文摘A possible two-dimensional viscous magnetohydrodynamics (MHD) model is applied to investigating the plasma armature in a railgun. The space-time conservation element and solution element (CE/SE) method for solving the coupled Navier-Stokes equations and Maxwell equations was devised. The distributions of physical parameters of the plasma may thus be evaluated. The results show that extremely high pressure can always be observed ahead of the projectile, and the Lorentz force is the main propulsion. The distribution of temperature is in a good agreement with the results predicted by the law of radiation at the boundaries. Due to convection, the circulation patterns of velocity are evident in both the cases considering inviscid and viscous effect. Furthermore, the velocity and acceleration oscillate over time until a new steady state is achieved. This model efficiently captures the salient features of the physical phenomena, and contributes to further studies of MHD problems in plasma armature.
文摘A one-dimensional pipe flow model of single-cylinder diesel engine is established to investigate the intake and exhaust flow characteristics of diesel engine in the condition of high power density(HPD).A space-lime conservation element and solution element(CE/SE)method is used to derive the discrete equations of the partial differential equation for the intake and exhaust systems.The performance parameters of diesel engine with speed of 2100 r/min are simulated.The simulated results are in accordance with the experimental data.The effect of increased power density on charging coefficient is analyzed using a validated model.The results show that the charging coefficient is slowly improved with the increase in intake pressure,and is obviously reduced with the increase in engine speed.
基金Project supported by the Natural Science Foundation of Jiangxi Province (2009GQC0042)Foundation of Jiangxi Educational Committee(GJJ10153)+1 种基金Major Science and Technology Project of Jiangxi Province (2010AZD00100)Foundation of Jiangxi University of Science and Technology (Jxxjzd10007)
文摘YAG：Ce3＋ phosphor was prepared by a novel co-precipitation-rheological phase method.The resulting YAG：Ce3＋ phosphor was characterized by X-ray diffraction（XRD）,scanning electron microscopy（SEM） and photoluminescent emission spectra.By using acetic acid as solvent,YAG：Ce3＋ powder with small particle size（≤2 μm） was obtained at a relatively lower sintering temperature of 1400 oC.With the content of acetic acid increasing,small particles dissolved and disappeared,but larger particles grew up and changed its shape from spherical to partially rectangular.Meanwhile,the emission intensity of the sample prepared by co-precipitation-rheological phase method was about 43% higher than that of the sample prepared by co-precipitation method.It was assumed that the significant improvement of luminescence was mainly because the rheological phase presented a better diffusion environment,and therefore,a better homogeneity of activators of Ce3＋.
基金Project supported by National Natural Science Foundation of China(51374004,51204083,51174105,51104074)Natural Science Foundation of Yunnan Province(2010ZC018)
文摘A series of Ceo.sFeo.30Zr0.20O2 catalysts were prepared by different methods （co-precipitations method, citric acid sol-gel method, impregnation method, physical mixed method, and hydrotherrnal method） and characterized by X-ray diffraction （XRD）, Raman spectroscopy, Brunauer-Emmett-Teller （BET） and H2-TPR measurements. Potential of the catalysts in the soot oxidation was evaluated in a temperature-programmed oxidation （TPO） apparatus. The results showed that all the Fe3＋ and Zr4＋ were incor- porated into ceria lattice to form a pure Ce-Fe-Zr-O solid solution for the co-precipitation sample, but two kinds of Fe phases ex- isted in the Ce-Fe-Zr-O catalysts prepared by other methods： Fe3＋ incorporated into CeO2 lattice and dispersed Fe2O3 clusters. The free Fe2O3 clusters could improve the activity of catalysts for soot oxidation comparing with the pure Ce-Fe-Zr-O solid solution owing to the synergetic effect between free Fe2O3 and surface oxygen vacancies. In addition, the activity of catalysts strongly relied on the surface reducibility of free Fe2O3 particles. Holding both abundant free Fe2O3 particles and high oxygen vacancy concentration, the hydrothermal Ce0.5Fe0.3Zr0.202 catalyst presented the lowest Ti （251℃, ignition temperature of soot oxidation） and Tm （310 ℃, maximum oxidation rate temperature） for soot combustion （with tight-contact between soot and catalysts） among the five samples. Even after aging at 800 ℃ for 10 h, the Ti and Tm were still relatively low, at 273 and 361 ℃, respectively, indicating high catalytic stability.
基金Project supported by the Instrument Developing Project of the Chinese Academy of Sciences(YJKYYQ20170019)International Partnership Program of Chinese Academy of Sciences(121631KYSB20180045)+2 种基金National Natural Science Foundation of China(51872309,U1832106,62005302)Science and Technology Commission of Shanghai Municipality(20511107400,ZJ2020-ZD-005)Science Foundation for Youth Scholar of State Key Laboratory of High Performance Ceramics and Superfine Micro structures(SKL201904)。
文摘The single crystal scintillating optical fibers acting as the scintillators and light conductors show potential application in scintillating fiber array detectors with high spatial resolution.In this paper we report the growth of 0.2 at%Ce:Y_(3)Al_(5)O_(12) single crystal fiber.The crystalline phase,surface morphology of the axialsection and cro ss-section,optical and scintillation properties of the as-grown fiber were investigated.The Ce:Y_(3)Al_(5)O_(12) single crystal fiber has a pure YAG phase,a uniform distribution of cerium in the axialsection and cross-section surface.Emission spectrum is composed of broad bands ranging from 440 to700 nm.In addition,the single crystal fiber has a high light yield of 26115±2000 photons/MeV,low energy resolution of 9.44%@662 keV and decay time of a fast component of 78 ns and a slow component of 301 ns.The intensity ratio of fast to slow components is roughly 8:1.
基金supported by the National Nature Science Foundation of China (Project No.20576023)the Natural Science Foundation of Guangdong Province (Project No.06025660).
文摘The Cu-Zr-Ce-O catalysts prepared using the coprecipitation method exhibited better catalytic performance for CO selective oxidation. The Cu-Zr-Ce-O catalysts pretreated with different methods were studied by CO-TPR and XPS techniques. The results showed that the Cu-Zr-Ce-O catalyst pretreated with oxygen exhibited the best catalytic performance and had the widest operating temperature window, with CO conversion above 99% from 160 to 200 ℃. The O2 pretreatment caused an enrichment of the oxygen storaged on the Cu active species and promoted the conversion of adsorbed oxygen into surface lattice oxygen. It also improved the amount of Cu＋/Cu^2＋ ionic pair, and then facilitated the formation of CuO active species on the catalyst for selective CO oxidation.
