In this work,we proposed a method to enhance the magnetic properties of(Nd,Ce)-Fe-B magnets with Ce/TRE ratios below 25 wt%by introducing a moderate amount of La elements.The segregation behavior of La elements toward...In this work,we proposed a method to enhance the magnetic properties of(Nd,Ce)-Fe-B magnets with Ce/TRE ratios below 25 wt%by introducing a moderate amount of La elements.The segregation behavior of La elements towards grain boundaries(GBs)was utilized to optimize the GB phase structure.Incorporation of La atoms into the main phase induces lattice expansion,leading to an increased formation of Ce^(3+)ions with enhanced magnetic moments.Comparative analysis with the original magnet(La/Ce=0 wt%)demonstrates that the magnet with a La/Ce ratio of 10 wt%exhibits improvements of 0.3%in remanence,12.6%in coercivity,and 0.6%in maximum energy produ ct.These results underscore that the moderate addition of La elements enhances the fluidity of the rare earth-rich phase and optimizes the distribution of lamellar GB,consequently reinforcing the magnetic isolation effect.Furthermore,the promotion of the transformation from Ce^(4+)to Ce^(3+)ons contributes to the comprehensive enhancement of the magnetic properties.This research offers a novel strategy for fabricating high-performance and resource-e fficient sintered magnets based on LaCe alloys.展开更多
The microstructure of(Nd,Ce)-Fe-B sintered magnets with different diffusion depths was characterized by a magnetic force microscope,and the relationship between the magnetic properties and the local structure of grain...The microstructure of(Nd,Ce)-Fe-B sintered magnets with different diffusion depths was characterized by a magnetic force microscope,and the relationship between the magnetic properties and the local structure of grain boundary diffused magnets is discussed.The domains perpendicular to the c-axis(easy magnetization direction)show a typical maze-like pattern,while those parallel to the c-axis show the characte ristics of plate domains.The significant gradient change is shown in the concentration of Dy with the direction of diffusion from the surface to the interior.Dy diffuses along grain boundaries and(Dy,Nd)_(2)Fe_(14)B layer with a high anisotropy field formed around the grains.Through in-situ electron probe micro-analysis/magnetic force microscopy(EPMA/MFM),it is found that the average domain width decreases,and the proportion of single domain grains increases as diffusion depth increases.This is caused by both the change of concentration and distribution of Dy.The grain boundary diffusion process changes the microstructure and microchemistry inside the magnet,and these local magnetism differences can be reflected by the configuration of the magnetic domain structure.展开更多
The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.T...The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.The novel structural features of GBDP(Nd,Ce)-Fe-B magnets give a version of different domain reversal processes from those of non-diffused magnets.In this work,the in-situ magnetic domain evolution of the DMP magnets was observed at elevated temperatures,and the temperature demagnetization and coercivity mechanism of the GBDP dual-main-phase(Nd,Ce)-Fe-B magnets are discussed.The results show that the shell composition of different types of grains in DMP magnets is similar,while the magnetic microstructure results indicate the Ce-rich grains tend to demagnetize first.Dy-rich shell with a high anisotropic field caused by GBDP leads to an increase in the nucleation field,which enhances the coercivity.It is found that much more grains exhibit single domain characteristics in the remanent state for GBDP dual-main-phase(Nd,Ce)-Fe-B magnets.In addition,the grains that undergo demagnetization first are Ce-rich or Nd-rich grains,which is different from that of non-diffused magnets.These results were not found in previous studies but can be intuitively characterized from the perspective of magnetic domains in this work,providing a new perspective and understanding of the performance improvement of magnetic materials.展开更多
The perovskite-type oxide solid solution Ba0.98Ce0.8Tm0.2O3-α was prepared by high temperature solid-state reaction and its single phase character was confirmed by X-ray diffraction. The conduction property of the sa...The perovskite-type oxide solid solution Ba0.98Ce0.8Tm0.2O3-α was prepared by high temperature solid-state reaction and its single phase character was confirmed by X-ray diffraction. The conduction property of the sample was investigated by alternating current impedance spectroscopy and gas concentration cell methods under different gases atmospheres in the temperature range of 500-900 ℃. The performance of the hydrogen-air fuel cell using the sample as solid electrolyte was measured. In wet hydrogen, the sample is a pure protonic conductor with the protonic transport number of 1 in the range of 500-600 ℃, a mixed conductor of proton and electron with the protonic transport number of 0.945-0.933 above 600 ℃. In wet air, the sample is a mixed conductor of proton, oxide ion, and electronic hole. The protonic transport numbers are 0.010-0.021, and the oxide ionic transport numbers are 0.471-0.382. In hydrogen-air fuel cell, the sample is a mixed conductor of proton, oxide ion and electron, the ionic transport numbers are 0.942 0.885. The fuel cell using Ba0.98Ce0.8Tm0.2O3-α as solid electrolyte can work stably. At 900 ℃, the maximum power output density is 110,2 mW/cm2, which is higher than that of our previous cell using Ba0.98Ce0.8Tm0.2O3-α （x〈≤1, RE=Y, Eu, Ho） as solid electrolyte.展开更多
Spinal dural arteriovenous fistulas (SDAVF) account for about 70% of all spinal AV shunts. We re-port on a 56-year-old male patient with progressive neurological symptoms. Pre- and post-contrast MR imaging of the spin...Spinal dural arteriovenous fistulas (SDAVF) account for about 70% of all spinal AV shunts. We re-port on a 56-year-old male patient with progressive neurological symptoms. Pre- and post-contrast MR imaging of the spine, including contrast-enhanced MR angiography was done on a 1.5 T MR scanner. In addition a special (pre-contrast) 3D turbo-spin-echo sequence with variable flip angle evolution (SPACE) was performed providing a slice thickness of 0.9 mm. T2-weighted images showed extensive widened and tortuous vascular structures with typical flow voids intradurally due to dilated pial veins. The origin of the spinal dural arteriovenous fistula was found to be the radiculomeningeal artery at level D10/11 on the left side, visualized by the T2-weighted 3D SPACE sequence and CE MRA. After imaging the patient was referred to an interventional neuroradiology department for therapy. With the detailed information from MR imaging concerning the fistula level the interventional radiologist was able to find the fistula immediately and consequently treated it successfully by endovascular therapy. Interpreting the MR images of this obvious case of a SDAVF, SPACE sequence after post processing with 3D MPR software directly led to the location of the AV shunt at D10/11 on the left side, better than 3D contrast-enhanced MR angiography did. Therefore, SPACE can be a useful adjunct in further evaluation of spinal dural arteriovenous fistula and especially in defining fistula level.展开更多
To obtain lightweight multicomponent magnesium alloys with high tensile strength,ductility,and stiffness,two extruded Mg_(92−5x)Al_(1.5+3x)Zn_(3)Cu_(3.5+x)Ce_(x)(x=0.5 and 1,labeled as C0.5 and C1)alloys were designed...To obtain lightweight multicomponent magnesium alloys with high tensile strength,ductility,and stiffness,two extruded Mg_(92−5x)Al_(1.5+3x)Zn_(3)Cu_(3.5+x)Ce_(x)(x=0.5 and 1,labeled as C0.5 and C1)alloys were designed.The results reveal that the ultimate tensile strength,yield strength(YS),and fracture strain of the C0.5 alloy are simultaneously improved compared to those of the C1 alloy,with values of 346 MPa,312 MPa,and 11.7%,respectively.This enhancement is primarily attributed to the refinement of numerous secondary phases(micron scale Al_(3)CuCe,micron scale MgZnCu,and nanoscale MgZnCu phases).The calculation of YS shows that the Orowan strengthening and coefficient of thermal expansion mismatch strengthening are the main strengthening mechanisms,and the contribution values of both to the YS are 28 and 70 MPa for C0.5 alloy.In addition,the C0.5 alloy has a greater plasticity than the C1 alloy because the<c+a>slip system is initiated.展开更多
The large and dense rare earth (RE)-oxide inclusions in high-oxygen RE metal increase the risk of producing variable properties in RE steel. Consequently, a self-developed electrolysis cell was utilized for the produc...The large and dense rare earth (RE)-oxide inclusions in high-oxygen RE metal increase the risk of producing variable properties in RE steel. Consequently, a self-developed electrolysis cell was utilized for the production of low-oxygen La/Ce mischmetal. The electrolysis process and the origin of oxygen in mischmetal were comprehensively investigated. The results indicate that the reaction between La/Ce oxide and fluoride molten salt results in the formation of La/Ce oxy-fluoride. The deposition of oxy-fluoride at the bottom of the electrolysis cell is the primary factor contributing to the increased oxygen content in mischmetal. The comprehensive influence of oxide addition quantity, feeding interval, and electrolysis temperature on oxygen content, purity, and current efficiency using the response surface methodology model is revealed. The results for industrial experiment show that the purity of mishcmetal reaches higher than 99.78 wt.%, the oxygen content of mischmetal is only 0.0047 wt.% and the current efficiency of the electrolysis process achieves 80.79% under the optimized parameters of 225 kg/d, 30 s and 1069 ℃. The findings offer valuable insights into the application of molten salt electrolysis for the production of low-oxygen mischmetal.展开更多
基金Project supported by the National Natural Science Foundation of China(52071004,52301228,51971005,52171168)the Program of Top Disciplines Construction in Beijing(PXM2019_014204_500031)the International Research Cooperation Seed Fund of Beijing University of Technology(2021B23)。
文摘In this work,we proposed a method to enhance the magnetic properties of(Nd,Ce)-Fe-B magnets with Ce/TRE ratios below 25 wt%by introducing a moderate amount of La elements.The segregation behavior of La elements towards grain boundaries(GBs)was utilized to optimize the GB phase structure.Incorporation of La atoms into the main phase induces lattice expansion,leading to an increased formation of Ce^(3+)ions with enhanced magnetic moments.Comparative analysis with the original magnet(La/Ce=0 wt%)demonstrates that the magnet with a La/Ce ratio of 10 wt%exhibits improvements of 0.3%in remanence,12.6%in coercivity,and 0.6%in maximum energy produ ct.These results underscore that the moderate addition of La elements enhances the fluidity of the rare earth-rich phase and optimizes the distribution of lamellar GB,consequently reinforcing the magnetic isolation effect.Furthermore,the promotion of the transformation from Ce^(4+)to Ce^(3+)ons contributes to the comprehensive enhancement of the magnetic properties.This research offers a novel strategy for fabricating high-performance and resource-e fficient sintered magnets based on LaCe alloys.
基金Project supported by the National Key Research and Development Program of China(2021YFB3503003,2021YFB3503100,2022YFB3505401)。
文摘The microstructure of(Nd,Ce)-Fe-B sintered magnets with different diffusion depths was characterized by a magnetic force microscope,and the relationship between the magnetic properties and the local structure of grain boundary diffused magnets is discussed.The domains perpendicular to the c-axis(easy magnetization direction)show a typical maze-like pattern,while those parallel to the c-axis show the characte ristics of plate domains.The significant gradient change is shown in the concentration of Dy with the direction of diffusion from the surface to the interior.Dy diffuses along grain boundaries and(Dy,Nd)_(2)Fe_(14)B layer with a high anisotropy field formed around the grains.Through in-situ electron probe micro-analysis/magnetic force microscopy(EPMA/MFM),it is found that the average domain width decreases,and the proportion of single domain grains increases as diffusion depth increases.This is caused by both the change of concentration and distribution of Dy.The grain boundary diffusion process changes the microstructure and microchemistry inside the magnet,and these local magnetism differences can be reflected by the configuration of the magnetic domain structure.
基金supported by the National Key Research and Development Program of China(Nos.2021YFB3503003,2021YFB3503100,and 2022YFB3505401).
文摘The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.The novel structural features of GBDP(Nd,Ce)-Fe-B magnets give a version of different domain reversal processes from those of non-diffused magnets.In this work,the in-situ magnetic domain evolution of the DMP magnets was observed at elevated temperatures,and the temperature demagnetization and coercivity mechanism of the GBDP dual-main-phase(Nd,Ce)-Fe-B magnets are discussed.The results show that the shell composition of different types of grains in DMP magnets is similar,while the magnetic microstructure results indicate the Ce-rich grains tend to demagnetize first.Dy-rich shell with a high anisotropic field caused by GBDP leads to an increase in the nucleation field,which enhances the coercivity.It is found that much more grains exhibit single domain characteristics in the remanent state for GBDP dual-main-phase(Nd,Ce)-Fe-B magnets.In addition,the grains that undergo demagnetization first are Ce-rich or Nd-rich grains,which is different from that of non-diffused magnets.These results were not found in previous studies but can be intuitively characterized from the perspective of magnetic domains in this work,providing a new perspective and understanding of the performance improvement of magnetic materials.
文摘The perovskite-type oxide solid solution Ba0.98Ce0.8Tm0.2O3-α was prepared by high temperature solid-state reaction and its single phase character was confirmed by X-ray diffraction. The conduction property of the sample was investigated by alternating current impedance spectroscopy and gas concentration cell methods under different gases atmospheres in the temperature range of 500-900 ℃. The performance of the hydrogen-air fuel cell using the sample as solid electrolyte was measured. In wet hydrogen, the sample is a pure protonic conductor with the protonic transport number of 1 in the range of 500-600 ℃, a mixed conductor of proton and electron with the protonic transport number of 0.945-0.933 above 600 ℃. In wet air, the sample is a mixed conductor of proton, oxide ion, and electronic hole. The protonic transport numbers are 0.010-0.021, and the oxide ionic transport numbers are 0.471-0.382. In hydrogen-air fuel cell, the sample is a mixed conductor of proton, oxide ion and electron, the ionic transport numbers are 0.942 0.885. The fuel cell using Ba0.98Ce0.8Tm0.2O3-α as solid electrolyte can work stably. At 900 ℃, the maximum power output density is 110,2 mW/cm2, which is higher than that of our previous cell using Ba0.98Ce0.8Tm0.2O3-α （x〈≤1, RE=Y, Eu, Ho） as solid electrolyte.
文摘Spinal dural arteriovenous fistulas (SDAVF) account for about 70% of all spinal AV shunts. We re-port on a 56-year-old male patient with progressive neurological symptoms. Pre- and post-contrast MR imaging of the spine, including contrast-enhanced MR angiography was done on a 1.5 T MR scanner. In addition a special (pre-contrast) 3D turbo-spin-echo sequence with variable flip angle evolution (SPACE) was performed providing a slice thickness of 0.9 mm. T2-weighted images showed extensive widened and tortuous vascular structures with typical flow voids intradurally due to dilated pial veins. The origin of the spinal dural arteriovenous fistula was found to be the radiculomeningeal artery at level D10/11 on the left side, visualized by the T2-weighted 3D SPACE sequence and CE MRA. After imaging the patient was referred to an interventional neuroradiology department for therapy. With the detailed information from MR imaging concerning the fistula level the interventional radiologist was able to find the fistula immediately and consequently treated it successfully by endovascular therapy. Interpreting the MR images of this obvious case of a SDAVF, SPACE sequence after post processing with 3D MPR software directly led to the location of the AV shunt at D10/11 on the left side, better than 3D contrast-enhanced MR angiography did. Therefore, SPACE can be a useful adjunct in further evaluation of spinal dural arteriovenous fistula and especially in defining fistula level.
基金financially supported by the National Key Research and Development Program of China(No.2022YFB3709300)the Guangdong Major Project of Basic and Applied Basic Research,China(No.2020B0301030006)the Chongqing Special Project of Science and Technology Innovation,China(No.cstc2021yszx-jcyjX0007)。
文摘To obtain lightweight multicomponent magnesium alloys with high tensile strength,ductility,and stiffness,two extruded Mg_(92−5x)Al_(1.5+3x)Zn_(3)Cu_(3.5+x)Ce_(x)(x=0.5 and 1,labeled as C0.5 and C1)alloys were designed.The results reveal that the ultimate tensile strength,yield strength(YS),and fracture strain of the C0.5 alloy are simultaneously improved compared to those of the C1 alloy,with values of 346 MPa,312 MPa,and 11.7%,respectively.This enhancement is primarily attributed to the refinement of numerous secondary phases(micron scale Al_(3)CuCe,micron scale MgZnCu,and nanoscale MgZnCu phases).The calculation of YS shows that the Orowan strengthening and coefficient of thermal expansion mismatch strengthening are the main strengthening mechanisms,and the contribution values of both to the YS are 28 and 70 MPa for C0.5 alloy.In addition,the C0.5 alloy has a greater plasticity than the C1 alloy because the<c+a>slip system is initiated.
基金supported by the National Natural Science Foundation of China(No.52101165)the Inner Mongolia Science and Technology Major Project(No.2020ZD0010)the Key Research Program of the Chinese Academy of Sciences(No.ZDRW-CN-2021-3).
文摘The large and dense rare earth (RE)-oxide inclusions in high-oxygen RE metal increase the risk of producing variable properties in RE steel. Consequently, a self-developed electrolysis cell was utilized for the production of low-oxygen La/Ce mischmetal. The electrolysis process and the origin of oxygen in mischmetal were comprehensively investigated. The results indicate that the reaction between La/Ce oxide and fluoride molten salt results in the formation of La/Ce oxy-fluoride. The deposition of oxy-fluoride at the bottom of the electrolysis cell is the primary factor contributing to the increased oxygen content in mischmetal. The comprehensive influence of oxide addition quantity, feeding interval, and electrolysis temperature on oxygen content, purity, and current efficiency using the response surface methodology model is revealed. The results for industrial experiment show that the purity of mishcmetal reaches higher than 99.78 wt.%, the oxygen content of mischmetal is only 0.0047 wt.% and the current efficiency of the electrolysis process achieves 80.79% under the optimized parameters of 225 kg/d, 30 s and 1069 ℃. The findings offer valuable insights into the application of molten salt electrolysis for the production of low-oxygen mischmetal.
