Microstructural evolution and dynamic recrystallization(DRX)mechanisms of a Ti-48Al-2Cr-2Nb(at.%)alloy prepared by selective electron beam melting(SEBM)during hot deformation at 1150℃and 0.1 s^(-1)were investigated b...Microstructural evolution and dynamic recrystallization(DRX)mechanisms of a Ti-48Al-2Cr-2Nb(at.%)alloy prepared by selective electron beam melting(SEBM)during hot deformation at 1150℃and 0.1 s^(-1)were investigated by hot compression tests,optical microscope(OM),scanning electron microscope(SEM),electron back-scattered diffraction(EBSD)and transmission electron microscope(TEM).The results show that the initial microstructure of the as-SEBMed alloy exhibits layers of coarseγgrains and fineγ+α_(2)+(α_(2)/γ)lamellar mixture grains alternately along the building direction.During the early stage of hot deformation,deformation twins tend to form within the coarse grains,facilitating subsequent deformation,and a small number of DRX grains appear in the fine-grained regions.With the increase of strain,extensive DRX grains are formed through different DRX mechanisms in both coarse and fine-grained regions,involving discontinuous dynamic recrystallization mechanism(DDRX)in the fine-grained regions and a coexistence of DDRX and continuous dynamic recrystallization(CDRX)in the coarsegrained regions.展开更多
Grain refinement of AZ31 Mg alloy during cyclic extrusion compression （CEC） at 225-400 ℃ was investigated quantitatively by electron backscattering diffraction （EBSD）. Results show that an ultrafine grained micro...Grain refinement of AZ31 Mg alloy during cyclic extrusion compression （CEC） at 225-400 ℃ was investigated quantitatively by electron backscattering diffraction （EBSD）. Results show that an ultrafine grained microstructure of AZ31 alloy is obtained only after 3 passes of CEC at 225 ℃. The mean misorientation and the fraction of high angle grain boundaries （HAGBs） increase gradually by lowering extrusion temperature. Only a small fraction of {101^-2} twinning is observed by EBSD in AZ31 Mg alloys after 3 passes of CEC. Schmid factors calculation shows that the most active slip system is pyramidal slip {101^-1}〈1120〉and basal slip {0001}〈1120〉 at 225-350 ℃ and 400 ℃, respectively. Direct evidences at subgrain boundaries support the occurrence of continuous dynamic recrystallization （CDRX） mechanism in grain refinement of AZ31 Mg alloy processed by CEC.展开更多
Extrusion experiments with different filling contents at the temperature of 440 ℃ were conducted for solution treated 7050 aluminum alloy.The microstructure of typical regions with different filler contents were desc...Extrusion experiments with different filling contents at the temperature of 440 ℃ were conducted for solution treated 7050 aluminum alloy.The microstructure of typical regions with different filler contents were described qualitatively and characterized quantitatively by electron backscattered diffraction technique(EBSD) and TEM.Fraction of deformed structure decrease continuously since ε=0.72.Second phase particles distribute dispersively and interact with dislocations when ε=0.66,which delays the occurrence of DRX.As the strain increases,particles dissolve into the matrix,and their number reduces rapidly.The influence of particles on dislocation accumulation is impaired,so dislocations accumulate on the subgrain boundaries continuously,and lead to the transformation of subgrain boundaries into high angle grain boundaries(HAGBs).The continuous dynamic recrystallization(CDRX) occurrs at the strain of 0.81～0.85.At ε=0.92,CDRX convert rapidly with the increase of HAGBs fraction.But the size of CDRX grains is deduced to be minimum 3.3 μm by theoretical analysis,and it is obtained from experimental result that the maximal size of CDRX is 5.3 μm.展开更多
We utilized electron backscatter diffraction to investigate the microstructure evolutions of a newly developed magnesium-rare earth alloy(Mg–9.80 Gd–3.78 Y–1.12 Sm–0.48 Zr)during instantaneous hot indirect extrusi...We utilized electron backscatter diffraction to investigate the microstructure evolutions of a newly developed magnesium-rare earth alloy(Mg–9.80 Gd–3.78 Y–1.12 Sm–0.48 Zr)during instantaneous hot indirect extrusion.An equiaxed fine-grained(average grain size of 3.4±0.2μm)microstructure with a weak texture was obtained.The grain refinement was mainly attributed to the discontinuous dynamic recrystallization(DDRX)and continuous DRX(CDRX)processes during the hot indirect extrusion process.The twin boundaries formed during the initial deformation stage effectively increased the number of high angle grain boundaries(HAGBs),which provided sites for new grain nuclei,and hence,resulted in an improved DDRX process.Along with DDRX,CDRX processes characterized by low angle grain boundary(LAGB)networks were also observed in the grain interior due to effective dynamic recovery(DRV)at a relatively high temperature of 773 K and high strain rates.Thereafter,LAGB networks were transformed into HAGB networks by the progressive rotation of subgrains during the CDRX process.展开更多
The study aimed to shed light on the post deformation and damage behavior of an extruded Mg-Zn-Zr alloy under a ballistic impact.The results revealed that the initial microstructure consisted of both{0001}basal and{10...The study aimed to shed light on the post deformation and damage behavior of an extruded Mg-Zn-Zr alloy under a ballistic impact.The results revealed that the initial microstructure consisted of both{0001}basal and{1010}prismatic fiber texture.After impact,adiabatic shear bands,pronounce different twinning in big grains,,<c>,and<c+a>types of dislocations,and grain refinement through twinning induce recrystallization accommodated the strain,and absorbed∼65.7%of the energy during impact carried by a soft steel projectile.Interestingly,the deformation behavior at the top broad sides of the crater was entirely different.The weak basal texture was changed to a strong prismatic texture,which was further proved by typical sigmoidal compressive stress-strain curves.A revised model for the development of the ultra-fine grains adjacent to the crater has been proposed.The microhardness and yield strength was∼33%and∼40%higher and chiefly ascribed to strain hardening in ultra-fine grained near the surface of the perforation path.The exit of the perforation path was severely damaged and forms onion-shaped concentric rings which were comprised of melted zones,dimples,and cracks.Based on the all interesting findings,this study can be a clue for the development of the lightweight Mg alloy for military and aerospace applications.展开更多
基金the financial supports from the Shaanxi Province Key Research and Development Projects,China(No.2023KXJ-071)the National Natural Science Foundation of China(Nos.52274402,52174381)。
文摘Microstructural evolution and dynamic recrystallization(DRX)mechanisms of a Ti-48Al-2Cr-2Nb(at.%)alloy prepared by selective electron beam melting(SEBM)during hot deformation at 1150℃and 0.1 s^(-1)were investigated by hot compression tests,optical microscope(OM),scanning electron microscope(SEM),electron back-scattered diffraction(EBSD)and transmission electron microscope(TEM).The results show that the initial microstructure of the as-SEBMed alloy exhibits layers of coarseγgrains and fineγ+α_(2)+(α_(2)/γ)lamellar mixture grains alternately along the building direction.During the early stage of hot deformation,deformation twins tend to form within the coarse grains,facilitating subsequent deformation,and a small number of DRX grains appear in the fine-grained regions.With the increase of strain,extensive DRX grains are formed through different DRX mechanisms in both coarse and fine-grained regions,involving discontinuous dynamic recrystallization mechanism(DDRX)in the fine-grained regions and a coexistence of DDRX and continuous dynamic recrystallization(CDRX)in the coarsegrained regions.
基金Projects(50674067,51074106,51374145)supported by the National Natural Science Foundation of ChinaProject(09JC1408200)supported by the Science and Technology Commission of Shanghai Municipality,China+1 种基金Project(2011BAE22B01-5)supported by the National Key Technology R&D Program of ChinaProjects(182000/S10,192450/I30)supported by the Research Council of Norway
文摘Grain refinement of AZ31 Mg alloy during cyclic extrusion compression （CEC） at 225-400 ℃ was investigated quantitatively by electron backscattering diffraction （EBSD）. Results show that an ultrafine grained microstructure of AZ31 alloy is obtained only after 3 passes of CEC at 225 ℃. The mean misorientation and the fraction of high angle grain boundaries （HAGBs） increase gradually by lowering extrusion temperature. Only a small fraction of {101^-2} twinning is observed by EBSD in AZ31 Mg alloys after 3 passes of CEC. Schmid factors calculation shows that the most active slip system is pyramidal slip {101^-1}〈1120〉and basal slip {0001}〈1120〉 at 225-350 ℃ and 400 ℃, respectively. Direct evidences at subgrain boundaries support the occurrence of continuous dynamic recrystallization （CDRX） mechanism in grain refinement of AZ31 Mg alloy processed by CEC.
文摘Extrusion experiments with different filling contents at the temperature of 440 ℃ were conducted for solution treated 7050 aluminum alloy.The microstructure of typical regions with different filler contents were described qualitatively and characterized quantitatively by electron backscattered diffraction technique(EBSD) and TEM.Fraction of deformed structure decrease continuously since ε=0.72.Second phase particles distribute dispersively and interact with dislocations when ε=0.66,which delays the occurrence of DRX.As the strain increases,particles dissolve into the matrix,and their number reduces rapidly.The influence of particles on dislocation accumulation is impaired,so dislocations accumulate on the subgrain boundaries continuously,and lead to the transformation of subgrain boundaries into high angle grain boundaries(HAGBs).The continuous dynamic recrystallization(CDRX) occurrs at the strain of 0.81～0.85.At ε=0.92,CDRX convert rapidly with the increase of HAGBs fraction.But the size of CDRX grains is deduced to be minimum 3.3 μm by theoretical analysis,and it is obtained from experimental result that the maximal size of CDRX is 5.3 μm.
基金financial support from the National Natural Science Foundation of China(Grant no.51571084)financial support from the Grant-in-Aid for Early-Career Scientists(Grant no.18K14024)financial support from the China Scholarship Council(Grant No.201908410208)
文摘We utilized electron backscatter diffraction to investigate the microstructure evolutions of a newly developed magnesium-rare earth alloy(Mg–9.80 Gd–3.78 Y–1.12 Sm–0.48 Zr)during instantaneous hot indirect extrusion.An equiaxed fine-grained(average grain size of 3.4±0.2μm)microstructure with a weak texture was obtained.The grain refinement was mainly attributed to the discontinuous dynamic recrystallization(DDRX)and continuous DRX(CDRX)processes during the hot indirect extrusion process.The twin boundaries formed during the initial deformation stage effectively increased the number of high angle grain boundaries(HAGBs),which provided sites for new grain nuclei,and hence,resulted in an improved DDRX process.Along with DDRX,CDRX processes characterized by low angle grain boundary(LAGB)networks were also observed in the grain interior due to effective dynamic recovery(DRV)at a relatively high temperature of 773 K and high strain rates.Thereafter,LAGB networks were transformed into HAGB networks by the progressive rotation of subgrains during the CDRX process.
基金This project was financially supported by the National Natural Science Foundation of China(No.51702015)。
文摘The study aimed to shed light on the post deformation and damage behavior of an extruded Mg-Zn-Zr alloy under a ballistic impact.The results revealed that the initial microstructure consisted of both{0001}basal and{1010}prismatic fiber texture.After impact,adiabatic shear bands,pronounce different twinning in big grains,,<c>,and<c+a>types of dislocations,and grain refinement through twinning induce recrystallization accommodated the strain,and absorbed∼65.7%of the energy during impact carried by a soft steel projectile.Interestingly,the deformation behavior at the top broad sides of the crater was entirely different.The weak basal texture was changed to a strong prismatic texture,which was further proved by typical sigmoidal compressive stress-strain curves.A revised model for the development of the ultra-fine grains adjacent to the crater has been proposed.The microhardness and yield strength was∼33%and∼40%higher and chiefly ascribed to strain hardening in ultra-fine grained near the surface of the perforation path.The exit of the perforation path was severely damaged and forms onion-shaped concentric rings which were comprised of melted zones,dimples,and cracks.Based on the all interesting findings,this study can be a clue for the development of the lightweight Mg alloy for military and aerospace applications.
