Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electri...Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity,which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.展开更多
The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSN...The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSNS-II)commenced in 2024.The CSNS-II linac design primarily involves the addition of a radio-frequency ion source and a section of a superconducting linear accelerator composed of two types of superconducting cavities,namely double-spoke and six-cell elliptical cavities,after the drift tube linac(DTL).The development of the double-spoke superconducting cavity began in early 2021,and by January 2023,the welding,post-processing,and vertical tests of two 324 MHz double-spoke cavity prototypes were completed,with vertical test gradients of 11.6 and 15 MV/m,and Q_(0)≥3×10^(10)@E_(acc)≤10 MV/m.The R&D of the cryomodule began in January 2022.In October 2023,the clean assembly of the double-spoke cavity string and cold mass installation of the cryomodule commenced,with the installation of the cryomodule and valve box completing in two months.In January 2024,a horizontal test of the cryomodule was completed,making it the first double-spoke cavity cryomodule in China.The test results showed that the maximum gradients of the two superconducting cavities at a pulse width of 4 ms and repetition frequency of 25 Hz were 12.8 and 15.2 MV/m,respectively.This article provides a detailed introduction to the double-spoke superconducting cavity,tuner,coupler,and cryomodule,elaborates on the clean assembly of the cavity string and cold mass installation of the cryomodule,and provides a detailed analysis of the horizontal test results.展开更多
Microwave–optical entanglement is essential for efficient quantum communication,secure information transfer,and integrating microwave and optical quantum systems to advance hybrid quantum technologies.In this work,we...Microwave–optical entanglement is essential for efficient quantum communication,secure information transfer,and integrating microwave and optical quantum systems to advance hybrid quantum technologies.In this work,we demonstrate how the magnon Kerr effect can be harnessed to generate and control nonreciprocal entanglement in cavity optomagnomechanics(COMM).This effect induces magnon frequency shifts and introduces pair-magnon interactions,both of which are tunable through the magnetic field direction,enabling nonreciprocal behavior.By adjusting system parameters such as magnon frequency detuning,we show that magnon–phonon,microwave–optical photon–photon,and optical photon–magnon entanglement can be nonreciprocally enhanced and rendered more robust against thermal noise.Additionally,the nonreciprocity of entanglement can be selectively controlled,and ideal nonreciprocal entanglement is achievable.This work paves the way for designing nonreciprocal quantum devices across the microwave and optical regimes,leveraging the unique properties of the magnon Kerr effect in COMM.展开更多
In conventional piezoelectric micromachined ultrasonic transducers(PMUTs),the backside acoustic energy is often used inefficiently,resulting in up to half of the energy being wasted.Vacuum encapsulation can improve th...In conventional piezoelectric micromachined ultrasonic transducers(PMUTs),the backside acoustic energy is often used inefficiently,resulting in up to half of the energy being wasted.Vacuum encapsulation can improve the energy utilization efficiency,but this technique is not compatible with state-of-the-art devices such as cantilever-based PMUTs.A closed back cavity provides an alternative method for effectively utilizing the backside acoustic energy.This paper investigates the effects of a closed back cavity on PMUT performance through theoretical analysis,simulations,and experimental verification.Increasing the cavity depth produces a periodic modulation of several key PMUT metrics,such as the relative frequency deviation and quality factor.The optimal cavity depth for PMUTs that ensures a robust resonant frequency and high quality factor is defined as a function of the acoustic wavelength.A closed back cavity also provides an effective method for continuously tuning the quality factor,and thus the bandwidth,of PMUTs.This work paves the way for air-coupled PMUTs with adjustable performance for various applications.展开更多
Superconducting radio-frequency(SRF)cavities are the core components of SRF linear accelerators,making their stable operation considerably important.However,the operational experience from different accelerator labora...Superconducting radio-frequency(SRF)cavities are the core components of SRF linear accelerators,making their stable operation considerably important.However,the operational experience from different accelerator laboratories has revealed that SRF faults are the leading cause of short machine downtime trips.When a cavity fault occurs,system experts analyze the time-series data recorded by low-level RF systems and identify the fault type.However,this requires expertise and intuition,posing a major challenge for control-room operators.Here,we propose an expert feature-based machine learning model for automating SRF cavity fault recognition.The main challenge in converting the"expert reasoning"process for SRF faults into a"model inference"process lies in feature extraction,which is attributed to the associated multidimensional and complex time-series waveforms.Existing autoregression-based feature-extraction methods require the signal to be stable and autocorrelated,resulting in difficulty in capturing the abrupt features that exist in several SRF failure patterns.To address these issues,we introduce expertise into the classification model through reasonable feature engineering.We demonstrate the feasibility of this method using the SRF cavity of the China accelerator facility for superheavy elements(CAFE2).Although specific faults in SRF cavities may vary across different accelerators,similarities exist in the RF signals.Therefore,this study provides valuable guidance for fault analysis of the entire SRF community.展开更多
The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure ...The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.展开更多
BACKGROUND Fungal balls within the nasal cavity are an exceedingly rare clinical entity,typically presenting with nonspecific symptoms or being identified incidentally.CASE SUMMARY This report presents an incidental d...BACKGROUND Fungal balls within the nasal cavity are an exceedingly rare clinical entity,typically presenting with nonspecific symptoms or being identified incidentally.CASE SUMMARY This report presents an incidental discovery of a fungal ball in the nasal cavity during routine imaging,with no associated clinical symptoms.CONCLUSION This case underscores the importance of considering the possibility of asympto-matic presentations of nasal fungal balls,which may be detected incidentally during imaging evaluations.展开更多
A novel substrate integrated microstrip to ultra-thin cavity filter transition operating in the W-band is proposed in this letter.The structure is a new method of connecting microstrip circuits and waveguide filters,a...A novel substrate integrated microstrip to ultra-thin cavity filter transition operating in the W-band is proposed in this letter.The structure is a new method of connecting microstrip circuits and waveguide filters,and this new structure enables a planar integrated transition from microstrip lines to ultra-thin cavity filters,thereby reducing the size of the transition structure and achieving miniaturization.The structure includes a conventional tapered microstrip transition structure,which guides the electromagnetic field from the microstrip line to the reduced-height dielectric-filled waveguide,and an air-filled matching cavity which is placed between the dielectric-filled waveguide and the ultra-thin cavity filter.The heights of the microstrip line,the dielectric-filled waveguide and the ultra-thin cavity filter are the same,enabling seamless integration within a planar radio-frequency(RF)circuit.To facilitate testing,mature finline transition structures are integrated at both ends of the microstrip line during fabrications.The simulation results of the fabricated microstrip to ultra-thin cavity filter transition with the finline transition structure,with a passband of 91.5-96.5 GHz,has an insertion loss of less than 1.9 dB and a return loss lower than-20 dB.And the whole structure has also been measured which achieves an insertion loss less than 2.6 dB and a return loss lower than-15 dB within the filter's passband,including the additional insertion loss introduced by the finline transitions.Finally,a W-band compact up-conversion module is designed,and the test results show that after using the proposed structure,the module achieves 95 dBc suppression of the 84 GHz local oscillator.It is also demonstrated that the structure proposed in this letter achieves miniaturization of the system integration without compromising the filter performance.展开更多
The titanium alloy strut serves as a key load-bearing component of aircraft landing gear,typically manufactured via forging.The friction condition has important influence on material flow and cavity filling during the...The titanium alloy strut serves as a key load-bearing component of aircraft landing gear,typically manufactured via forging.The friction condition has important influence on material flow and cavity filling during the forging process.Using the previously optimized shape and initial position of preform,the influence of the friction condition(friction factor m=0.1–0.3)on material flow and cavity filling was studied by numerical method with a shear friction model.A novel filling index was defined to reflect material flow into left and right flashes and zoom in on friction-induced results.The results indicate that the workpiece moves rigidly to the right direction,with the displacement decreasing as m increases.When m<0.18,the underfilling defect will occur in the left side of strut forging,while overflow occurs in the right forging die cavity.By combining the filling index and analyses of material flow and filling status,a reasonable friction factor interval of m=0.21–0.24 can be determined.Within this interval,the cavity filling behavior demonstrates robustness,with friction fluctuations exerting minimal influence.展开更多
A plasmonics waveguide structure that consist of a non-through metal–insulator–metal(MIM)waveguide coupled with a D-shaped cavity was designed.And the transmission properties,magnetic field distribution,and refracti...A plasmonics waveguide structure that consist of a non-through metal–insulator–metal(MIM)waveguide coupled with a D-shaped cavity was designed.And the transmission properties,magnetic field distribution,and refractive index sensing functionality were simulated using the finite element method(FEM).A multi-Fano resonance phenomenon was clearly observable in the transmission spectra.The Fano resonances observed in the proposed structure arise from the interaction between the discrete states of the Dshaped resonant cavity and the continuum state of the non-through MIM waveguide.The influence of structural parameters on Fano resonance modulation was investigated through systematic parameter adjustments.Additionally,the refractive index sensing properties,based on the Fano resonance,were investigated by varying the refractive index of the MIM waveguide's insulator layer.A maximum sensitivity and FOM of 1155 RIU/nm and 40 were achieved,respectively.This research opens up new possibilities for designing and exploring high-sensitivity photonic devices,micro-sensors,and innovative on-chip sensing architectures for future applications.展开更多
Dispersion of Particle-laden Jet in Supersonic Crossflow(PJSC)is an essential process in many applications,experimental study on which,however,has rarely been reported.In order to gain physical insights into PJSC,a sp...Dispersion of Particle-laden Jet in Supersonic Crossflow(PJSC)is an essential process in many applications,experimental study on which,however,has rarely been reported.In order to gain physical insights into PJSC,a specialized experimental setup capable of producing a supersonic crossflow at Mach 2.6 and a particle-laden jet with particle mass loading up to 60%is developed.Visualization of the particles motion is achieved with the help of high-speed planar laser scattering technology.The dispersion characteristics of PJSC within a supersonic channel structured by cavity are systematically analyzed through six experimental cases.The results indicate that the vortices have a significant influence on particle dispersion,leading to preferential concentration of particles.i.e.particle clusters.The particle dispersion is summarized as the"scale dispersion"pattern.The primary pathways for particles entering the cavity are identified as the shear layer above the cavity and collisions at the cavity rear edge.Among the studied factors,the momentum flux ratio exerts the most substantial influence on the dispersion process.Importantly,a reduction in the injection distance is correlated with less particles entering the cavity.The insights gained from this research provide essential references for furthering understanding particle dispersion mechanisms in supersonic flows and developing highly accurate numerical models.展开更多
Open cavities with different door-opening angles are investigated using high-speed schlieren visualization and dynamic pressure measurements in hypersonic flow with a freestream Mach number of 6.With the help of numer...Open cavities with different door-opening angles are investigated using high-speed schlieren visualization and dynamic pressure measurements in hypersonic flow with a freestream Mach number of 6.With the help of numerical simulations,the shear layer deformation and pressure increase in the cavities due to the impingement of the door-leading-edge shocks are identified via comparison with those in the cavity without doors.As the door-opening angle decreases from 90°,the shear layer above the forepart of the cavity is gradually raised by the high pressure in the cavity.When the door-opening angle decreases to 30°and 15°,the boundary layer on the upstream flat plate of the cavity separates,and separation shock is observed.The doors enhance the instability of the cavity flow and increase the pressure fluctuations in the cavities.A new oscillation pattern,referred to as coupled oscillation,is observed in the cases with separation on the upstream flat plate,in which the separation shock oscillates at the same dominant frequency as the flow inside the cavity.Compared with the cavity without doors,this coupled oscillation causes a lower oscillation frequency and a larger overall sound pressure level.Cross-correlation analyses between pressure signals indicate that the disturbances generated at the trailing edge of the cavity can propagate to the separation on the upstream flat plate and cause coupled oscillation of the separation shock.The fundamental frequencies of the coupled oscillations can be normalized to approximately the same Strouhal number as that of the cavity without doors.These findings support that the oscillation mechanisms of hypersonic cavities without and with doors are primarily dominated by acoustic feedback.展开更多
This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on t...This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.展开更多
A 63-year-old man was admitted to the hospital with a>1-year history of repeated acid reflux and belching and a 1-month history of an abdominal mass.On admission,the patient was in good condition,and his vital sign...A 63-year-old man was admitted to the hospital with a>1-year history of repeated acid reflux and belching and a 1-month history of an abdominal mass.On admission,the patient was in good condition,and his vital signs were stable.Laboratory examinations revealed no significant abnormalities.展开更多
A numerical and experimental study was conducted to investigate the Laser Ablation(LA)ignition mode in an ethylene-fueled supersonic combustor with a cavity flameholder.Theexperiments were operated under a Mach number...A numerical and experimental study was conducted to investigate the Laser Ablation(LA)ignition mode in an ethylene-fueled supersonic combustor with a cavity flameholder.Theexperiments were operated under a Mach number 2.92 supersonic inflow,with stagnation pressureof 2.4 MPa and stagnation temperature of 1600 K.Reynolds-averaged Navier-Stokes simulationswere conducted to characterize the mixing process and flow field structure.This study identifiedfour distinct LA ignition modes.Under the specified condition,laser ablation in zero and negativedefocusing states manifested two distinct ignition modes termed Laser Ablation Direct Ignition(LADI)mode and Laser Ablation Re-Ignition(LARI)mode,correspondingly.LA ignition in alocal small cavity,created by depressing the flow field regulator,could facilitate the ignition modetransforming from LARI mode to Laser Ablation Transition Ignition(LATI)mode.On the otherhand,the elevation of the flow field regulator effectively inhibited the forward propagation of theinitial flame kernel and reduced the dissipation of LA plasma,further enhancing the LADI mode.Based on these characteristics,the LADI mode was subdivided into strong(LADI-S)and weak(LADI-W)modes.Facilitating the transition of ignition modes through alterations in the local flowfield could contribute to attaining a more effective and stable LA ignition.展开更多
Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched ...Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched marine equipment in low-temperature ice-prone waters.A computational fluid dynamics-finite element method(CFD-FEM) coupled framework was established to simulate bidirectional fluid-structure interactions during the water-exit process of a ventilated vehicle impacting ice in brash environments.Distinct evolution characteristics were revealed by comparatively analyzing the cavity,flow fields,hydrodynamic loading,structural deformation,and trajectory stability across three scenarios:ice-free,single-ice,and multi-ice.Furthermore,the position-dependent impact effects were characterized.The findings reveal that the impact,friction,and compression effects of ice induce bending and wrinkling of the shoulder cavity,aggravating its collapse and increasing the wetting of the vehicle,resulting in a substantial expansion of the high-velocity and vortex-dominated regions within the flow field,accompanied by more obvious water splashes.The impact of ice notably increases the kinetic energy dissipation of the vehicle during the cross-water stage and diminishes its motion stability.In the center-symmetric layout,the vehicle collides with ice only once,with high stress confined to the head.Conversely,the radial-offset layout causes secondary or even multiple collisions,resulting in high-stress areas on the shoulder of the vehicle,making it deflect and ultimately causing the tail cavity to tilt and become destabilized.The design of new vehicles suitable for ice-prone environments should focus on enhancing the impact toughness of the head structure and optimizing the surface shape design to improve the adaptability to low-temperature complex environments.展开更多
The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assu...The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assumed that the source is located outside the cavity at a specified distance from the borehole axis.The magnitudes of the hoop and radial stresses beside the pore pressures exerted on the interface and inside the porous medium surrounding the borehole are calculated and discussed.Biot's poroelastic modeling along with three types of boundary conditions for the cylindrical interface including the ideal fluid,empty borehole,and rigid inclusion with a hard boundary is employed for the analysis.Utilizing a proper translational addition theorem for expressing the incident spherical wave in terms of cylindrical wave expansions,the proposed boundary conditions at the interface are satisfied.Stresses are formulated by means of wave potential functions in a three-dimensional(3D)manner.The effects of the frequency and the radial distance between the source and borehole on the induced stresses are examined for the first cylindrical modes over frequency spectra.Two permeability conditions for the interface and three types of soils for the porous formation are considered throughout the analysis.To give an overall outline of the study,a numerical example is presented.The results clearly indicate that the distance is a key parameter and has considerable effects on the induced stress values.In addition,the interface permeability condition and soil characteristics play an important role in determining the dynamic response of the borehole.Finally,the obtained results are compared with the relevant analyses existing in the literature for some limit cases,and good agreement is achieved.展开更多
The formation of hotspots and ignition phenomena in cavitated explosive particle clouds under shock wave impacts have garnered widespread attention.However,at the mesoscale,under shock wave impact,there is a notable s...The formation of hotspots and ignition phenomena in cavitated explosive particle clouds under shock wave impacts have garnered widespread attention.However,at the mesoscale,under shock wave impact,there is a notable scarcity of research on the deformation,temperature rise patterns,and heat transfer mechanisms of particle clouds.Most studies focus on loading methods such as drop hammer and falling tests.In our study,we introduce a particle motion elastoplastic contact model based on the discrete element method,enabling precise analysis of particle motion and collision behavior.Furthermore,we consider bidirectional coupling between the particle and gas phases,optimizing momentum and energy equations for the particle phase.This approach allows for a detailed analysis of the dynamics and thermodynamics between particles,systematically considering the elastoplastic collision and shear history between particles.Friction,rolling resistance,plastic dissipation,inter-particle heat transfer,and heat transfer between particles and the fluid are regarded as source terms in the energy equation.In this investigation,the deformation behavior and temperature rise process of particle clouds under shock wave impacts are thoroughly discussed.The temporal evolution of particle cloud temperature under shock wave impacts represents a spatiotemporal correlation phenomenon,delineated into two stages:accelerated temperature rise and steady temperature rise,resulting in the formation of symmetric critical hightemperature regions near the cavity perpendicular to the incoming shock wave direction.Notably,during the accelerated temperature rise stage,plastic dissipation,and two-phase heat transfer jointly contribute,whereas during the steady temperature increase stage,heat is primarily provided by two-phase heat transfer.Sustained heat transfer from the high-temperature shock-impacted gas phase to the particle phase acts as the primary mechanism triggering the formation of wide-range high-temperature regions.The role of plastic dissipation is mainly evident in the plastic collisions of particles near the cavity in the early stages.Additionally,we analyze the influence of incoming shock wave Mach numbers on temperature evolution and hot region formation patterns:stronger shock waves lead to quicker completion of the impact process and higher stable average temperatures.Under shock wave impact,the spatiotemporal characteristics of particle clouds differ from the results of the falling process.Prolonged two-phase heat transfer and intense plastic contact among particles near the cavity in the initial stages are factors triggering critical high-temperature regions.展开更多
Taking a C1x motor with a backward-facing step which can generate a typical corner vortex as a reference,a numerical methodology using large eddy simulation was established in this study.Based on this methodology,the ...Taking a C1x motor with a backward-facing step which can generate a typical corner vortex as a reference,a numerical methodology using large eddy simulation was established in this study.Based on this methodology,the position of the backward-facing step of the motor was computed and analyzed to determine a basic configuration.Two key geometrical parameters,the head cavity angle and submerged nozzle cavity height,were subsequently introduced.Their effects on the corner vortex motion and their interactions with the acoustic pressure downstream of the backward-facing step were analyzed.The phenomena of vortex acoustic coupling and characteristics of pressure oscillations were further explored.The results show that the maximum error between the simulations and experimental data on the dominant frequency of pressure oscillations is 5.23%,which indicates that the numerical methodology built in this study is highly accurate.When the step is located at less than 5/8 of the total length of the combustion chamber,vortex acoustic coupling occurs,which can increase the pressure oscillations in the motor.Both the vorticity and the scale of vortices in the downstream step increase when the head cavity angle is greater than 24°,which increases the amplitude of the pressure oscillation by maximum 63.0%.The submerged nozzle cavity mainly affects the vortices in the cavity itself rather than those in the downstream step.When the height of the cavity increases from 10 to 20 mm,the pressure oscillation amplitude under the main frequency increases by 39.1%.As this height continues to increase,the amplitude of pressure oscillations increases but the primary frequency decreases.展开更多
基金the fundings from National Key R&D Program of China (Grant No. 2022YFA1404002)National Natural Science Foundation of China (Grant Nos. T2495253, U20A20218, 61525504, and 61435011)+4 种基金Anhui Initiative in Quantum Information Technologies (Grant No. AHY020200)Major Science and Technology Projects in Anhui Province (Grant No. 202203a13010001)Youth Innovation Promotion Association of the Chinese Academy of Sciences (Grant No. 2018490)the fundings from Anhui Provincial Department of Education (Grant No. YQZD2024061)Research Program of Higher Education Institutions in Anhui Province (Grant No. 2024AH050645)。
文摘Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity,which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.
文摘The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSNS-II)commenced in 2024.The CSNS-II linac design primarily involves the addition of a radio-frequency ion source and a section of a superconducting linear accelerator composed of two types of superconducting cavities,namely double-spoke and six-cell elliptical cavities,after the drift tube linac(DTL).The development of the double-spoke superconducting cavity began in early 2021,and by January 2023,the welding,post-processing,and vertical tests of two 324 MHz double-spoke cavity prototypes were completed,with vertical test gradients of 11.6 and 15 MV/m,and Q_(0)≥3×10^(10)@E_(acc)≤10 MV/m.The R&D of the cryomodule began in January 2022.In October 2023,the clean assembly of the double-spoke cavity string and cold mass installation of the cryomodule commenced,with the installation of the cryomodule and valve box completing in two months.In January 2024,a horizontal test of the cryomodule was completed,making it the first double-spoke cavity cryomodule in China.The test results showed that the maximum gradients of the two superconducting cavities at a pulse width of 4 ms and repetition frequency of 25 Hz were 12.8 and 15.2 MV/m,respectively.This article provides a detailed introduction to the double-spoke superconducting cavity,tuner,coupler,and cryomodule,elaborates on the clean assembly of the cavity string and cold mass installation of the cryomodule,and provides a detailed analysis of the horizontal test results.
基金supported by the Natural Science Foundation of Zhejiang Province(Grant No.LY24A040004)the“Pioneer”and“Leading Goose”R&D Program of Zhejiang(Grant No.2025C01028)+2 种基金the Shenzhen International Quantum Academy(Grant No.SIQA2024KFKT010)YWW is supported by the Natural Science Foundation of Zhejiang Province(Grant No.LY23A40002)Wenzhou Science and Technology Plan Project(Grant No.L20240004).
文摘Microwave–optical entanglement is essential for efficient quantum communication,secure information transfer,and integrating microwave and optical quantum systems to advance hybrid quantum technologies.In this work,we demonstrate how the magnon Kerr effect can be harnessed to generate and control nonreciprocal entanglement in cavity optomagnomechanics(COMM).This effect induces magnon frequency shifts and introduces pair-magnon interactions,both of which are tunable through the magnetic field direction,enabling nonreciprocal behavior.By adjusting system parameters such as magnon frequency detuning,we show that magnon–phonon,microwave–optical photon–photon,and optical photon–magnon entanglement can be nonreciprocally enhanced and rendered more robust against thermal noise.Additionally,the nonreciprocity of entanglement can be selectively controlled,and ideal nonreciprocal entanglement is achievable.This work paves the way for designing nonreciprocal quantum devices across the microwave and optical regimes,leveraging the unique properties of the magnon Kerr effect in COMM.
基金supported in part by the National Natural Science Foundation of China(NSFC)(Grant No.62001322)in part by the National Key Research and Development Program(Grant No.2020YFB2008800).
文摘In conventional piezoelectric micromachined ultrasonic transducers(PMUTs),the backside acoustic energy is often used inefficiently,resulting in up to half of the energy being wasted.Vacuum encapsulation can improve the energy utilization efficiency,but this technique is not compatible with state-of-the-art devices such as cantilever-based PMUTs.A closed back cavity provides an alternative method for effectively utilizing the backside acoustic energy.This paper investigates the effects of a closed back cavity on PMUT performance through theoretical analysis,simulations,and experimental verification.Increasing the cavity depth produces a periodic modulation of several key PMUT metrics,such as the relative frequency deviation and quality factor.The optimal cavity depth for PMUTs that ensures a robust resonant frequency and high quality factor is defined as a function of the acoustic wavelength.A closed back cavity also provides an effective method for continuously tuning the quality factor,and thus the bandwidth,of PMUTs.This work paves the way for air-coupled PMUTs with adjustable performance for various applications.
基金supported by the studies of intelligent LLRF control algorithms for superconducting RF cavities(No.E129851YR0)the National Natural Science Foundation of China(No.U22A20261)Applications of Artificial Intelligence in the Stability Study of Superconducting Linear Accelerators(No.E429851YR0)。
文摘Superconducting radio-frequency(SRF)cavities are the core components of SRF linear accelerators,making their stable operation considerably important.However,the operational experience from different accelerator laboratories has revealed that SRF faults are the leading cause of short machine downtime trips.When a cavity fault occurs,system experts analyze the time-series data recorded by low-level RF systems and identify the fault type.However,this requires expertise and intuition,posing a major challenge for control-room operators.Here,we propose an expert feature-based machine learning model for automating SRF cavity fault recognition.The main challenge in converting the"expert reasoning"process for SRF faults into a"model inference"process lies in feature extraction,which is attributed to the associated multidimensional and complex time-series waveforms.Existing autoregression-based feature-extraction methods require the signal to be stable and autocorrelated,resulting in difficulty in capturing the abrupt features that exist in several SRF failure patterns.To address these issues,we introduce expertise into the classification model through reasonable feature engineering.We demonstrate the feasibility of this method using the SRF cavity of the China accelerator facility for superheavy elements(CAFE2).Although specific faults in SRF cavities may vary across different accelerators,similarities exist in the RF signals.Therefore,this study provides valuable guidance for fault analysis of the entire SRF community.
基金financial support from the National Natural Science Foundation of China(Grant No.11572159).
文摘The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.
文摘BACKGROUND Fungal balls within the nasal cavity are an exceedingly rare clinical entity,typically presenting with nonspecific symptoms or being identified incidentally.CASE SUMMARY This report presents an incidental discovery of a fungal ball in the nasal cavity during routine imaging,with no associated clinical symptoms.CONCLUSION This case underscores the importance of considering the possibility of asympto-matic presentations of nasal fungal balls,which may be detected incidentally during imaging evaluations.
基金Supported by the Fundamental Research Funds for the Central Universities(ZYGX2021J008)。
文摘A novel substrate integrated microstrip to ultra-thin cavity filter transition operating in the W-band is proposed in this letter.The structure is a new method of connecting microstrip circuits and waveguide filters,and this new structure enables a planar integrated transition from microstrip lines to ultra-thin cavity filters,thereby reducing the size of the transition structure and achieving miniaturization.The structure includes a conventional tapered microstrip transition structure,which guides the electromagnetic field from the microstrip line to the reduced-height dielectric-filled waveguide,and an air-filled matching cavity which is placed between the dielectric-filled waveguide and the ultra-thin cavity filter.The heights of the microstrip line,the dielectric-filled waveguide and the ultra-thin cavity filter are the same,enabling seamless integration within a planar radio-frequency(RF)circuit.To facilitate testing,mature finline transition structures are integrated at both ends of the microstrip line during fabrications.The simulation results of the fabricated microstrip to ultra-thin cavity filter transition with the finline transition structure,with a passband of 91.5-96.5 GHz,has an insertion loss of less than 1.9 dB and a return loss lower than-20 dB.And the whole structure has also been measured which achieves an insertion loss less than 2.6 dB and a return loss lower than-15 dB within the filter's passband,including the additional insertion loss introduced by the finline transitions.Finally,a W-band compact up-conversion module is designed,and the test results show that after using the proposed structure,the module achieves 95 dBc suppression of the 84 GHz local oscillator.It is also demonstrated that the structure proposed in this letter achieves miniaturization of the system integration without compromising the filter performance.
基金National Natural Science Foundation of China(52375378)National Key Laboratory of Metal Forming Technology and Heavy Equipment(S2308100.W12)Huxiang High-Level Talent Gathering Project of Hunan Province(2021RC5001)。
文摘The titanium alloy strut serves as a key load-bearing component of aircraft landing gear,typically manufactured via forging.The friction condition has important influence on material flow and cavity filling during the forging process.Using the previously optimized shape and initial position of preform,the influence of the friction condition(friction factor m=0.1–0.3)on material flow and cavity filling was studied by numerical method with a shear friction model.A novel filling index was defined to reflect material flow into left and right flashes and zoom in on friction-induced results.The results indicate that the workpiece moves rigidly to the right direction,with the displacement decreasing as m increases.When m<0.18,the underfilling defect will occur in the left side of strut forging,while overflow occurs in the right forging die cavity.By combining the filling index and analyses of material flow and filling status,a reasonable friction factor interval of m=0.21–0.24 can be determined.Within this interval,the cavity filling behavior demonstrates robustness,with friction fluctuations exerting minimal influence.
文摘A plasmonics waveguide structure that consist of a non-through metal–insulator–metal(MIM)waveguide coupled with a D-shaped cavity was designed.And the transmission properties,magnetic field distribution,and refractive index sensing functionality were simulated using the finite element method(FEM).A multi-Fano resonance phenomenon was clearly observable in the transmission spectra.The Fano resonances observed in the proposed structure arise from the interaction between the discrete states of the Dshaped resonant cavity and the continuum state of the non-through MIM waveguide.The influence of structural parameters on Fano resonance modulation was investigated through systematic parameter adjustments.Additionally,the refractive index sensing properties,based on the Fano resonance,were investigated by varying the refractive index of the MIM waveguide's insulator layer.A maximum sensitivity and FOM of 1155 RIU/nm and 40 were achieved,respectively.This research opens up new possibilities for designing and exploring high-sensitivity photonic devices,micro-sensors,and innovative on-chip sensing architectures for future applications.
基金co-supported by the National Natural Science Foundation of China (No. 12272409)the Scientific Research and Innovation Project of Hunan Province, China (Nos. CX20230058, kq2107001, 2022RC1233 and QL20230015)
文摘Dispersion of Particle-laden Jet in Supersonic Crossflow(PJSC)is an essential process in many applications,experimental study on which,however,has rarely been reported.In order to gain physical insights into PJSC,a specialized experimental setup capable of producing a supersonic crossflow at Mach 2.6 and a particle-laden jet with particle mass loading up to 60%is developed.Visualization of the particles motion is achieved with the help of high-speed planar laser scattering technology.The dispersion characteristics of PJSC within a supersonic channel structured by cavity are systematically analyzed through six experimental cases.The results indicate that the vortices have a significant influence on particle dispersion,leading to preferential concentration of particles.i.e.particle clusters.The particle dispersion is summarized as the"scale dispersion"pattern.The primary pathways for particles entering the cavity are identified as the shear layer above the cavity and collisions at the cavity rear edge.Among the studied factors,the momentum flux ratio exerts the most substantial influence on the dispersion process.Importantly,a reduction in the injection distance is correlated with less particles entering the cavity.The insights gained from this research provide essential references for furthering understanding particle dispersion mechanisms in supersonic flows and developing highly accurate numerical models.
基金supported by the National Natural Science Foundation of China(Nos.12172354,12388101,U21B6003)the Strategic Priority Research Program of Chinese Academy of Sciences(No.XDB0620201).
文摘Open cavities with different door-opening angles are investigated using high-speed schlieren visualization and dynamic pressure measurements in hypersonic flow with a freestream Mach number of 6.With the help of numerical simulations,the shear layer deformation and pressure increase in the cavities due to the impingement of the door-leading-edge shocks are identified via comparison with those in the cavity without doors.As the door-opening angle decreases from 90°,the shear layer above the forepart of the cavity is gradually raised by the high pressure in the cavity.When the door-opening angle decreases to 30°and 15°,the boundary layer on the upstream flat plate of the cavity separates,and separation shock is observed.The doors enhance the instability of the cavity flow and increase the pressure fluctuations in the cavities.A new oscillation pattern,referred to as coupled oscillation,is observed in the cases with separation on the upstream flat plate,in which the separation shock oscillates at the same dominant frequency as the flow inside the cavity.Compared with the cavity without doors,this coupled oscillation causes a lower oscillation frequency and a larger overall sound pressure level.Cross-correlation analyses between pressure signals indicate that the disturbances generated at the trailing edge of the cavity can propagate to the separation on the upstream flat plate and cause coupled oscillation of the separation shock.The fundamental frequencies of the coupled oscillations can be normalized to approximately the same Strouhal number as that of the cavity without doors.These findings support that the oscillation mechanisms of hypersonic cavities without and with doors are primarily dominated by acoustic feedback.
基金supported by National Natural Science Foundation of China(Grant No.52205344,51925401)Postdoctoral Research Foundation of China(Grant No.2023M732398)+1 种基金National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact(Grant No.WDZC2023-1)Key Research and Development Program of Shandong Province(Grant No.2023CXPT066).
文摘This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.
基金supported by the National Natural Science Foundation of China(Project No.82160348)the Yunnan Province Major Special Plan(No.202302AA310018-D-8)+1 种基金the Youth Talent Project of Yunnan Province's“Xingdian Talent Support Program”(No.XDYC-QNRC-2022-0608)the 2024 Senior Health Technology and Medical Discipline Leader of Yunnan Provincial Health Commission(No.D-2024056).
文摘A 63-year-old man was admitted to the hospital with a>1-year history of repeated acid reflux and belching and a 1-month history of an abdominal mass.On admission,the patient was in good condition,and his vital signs were stable.Laboratory examinations revealed no significant abnormalities.
基金supported by the National Natural Science Foundation of China(Nos.12272408 and 11925207)the Natural Science Foundation for Distinguished Young Scholars of Hunan Province,China(No.2024J12057)。
文摘A numerical and experimental study was conducted to investigate the Laser Ablation(LA)ignition mode in an ethylene-fueled supersonic combustor with a cavity flameholder.Theexperiments were operated under a Mach number 2.92 supersonic inflow,with stagnation pressureof 2.4 MPa and stagnation temperature of 1600 K.Reynolds-averaged Navier-Stokes simulationswere conducted to characterize the mixing process and flow field structure.This study identifiedfour distinct LA ignition modes.Under the specified condition,laser ablation in zero and negativedefocusing states manifested two distinct ignition modes termed Laser Ablation Direct Ignition(LADI)mode and Laser Ablation Re-Ignition(LARI)mode,correspondingly.LA ignition in alocal small cavity,created by depressing the flow field regulator,could facilitate the ignition modetransforming from LARI mode to Laser Ablation Transition Ignition(LATI)mode.On the otherhand,the elevation of the flow field regulator effectively inhibited the forward propagation of theinitial flame kernel and reduced the dissipation of LA plasma,further enhancing the LADI mode.Based on these characteristics,the LADI mode was subdivided into strong(LADI-S)and weak(LADI-W)modes.Facilitating the transition of ignition modes through alterations in the local flowfield could contribute to attaining a more effective and stable LA ignition.
文摘Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched marine equipment in low-temperature ice-prone waters.A computational fluid dynamics-finite element method(CFD-FEM) coupled framework was established to simulate bidirectional fluid-structure interactions during the water-exit process of a ventilated vehicle impacting ice in brash environments.Distinct evolution characteristics were revealed by comparatively analyzing the cavity,flow fields,hydrodynamic loading,structural deformation,and trajectory stability across three scenarios:ice-free,single-ice,and multi-ice.Furthermore,the position-dependent impact effects were characterized.The findings reveal that the impact,friction,and compression effects of ice induce bending and wrinkling of the shoulder cavity,aggravating its collapse and increasing the wetting of the vehicle,resulting in a substantial expansion of the high-velocity and vortex-dominated regions within the flow field,accompanied by more obvious water splashes.The impact of ice notably increases the kinetic energy dissipation of the vehicle during the cross-water stage and diminishes its motion stability.In the center-symmetric layout,the vehicle collides with ice only once,with high stress confined to the head.Conversely,the radial-offset layout causes secondary or even multiple collisions,resulting in high-stress areas on the shoulder of the vehicle,making it deflect and ultimately causing the tail cavity to tilt and become destabilized.The design of new vehicles suitable for ice-prone environments should focus on enhancing the impact toughness of the head structure and optimizing the surface shape design to improve the adaptability to low-temperature complex environments.
文摘The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assumed that the source is located outside the cavity at a specified distance from the borehole axis.The magnitudes of the hoop and radial stresses beside the pore pressures exerted on the interface and inside the porous medium surrounding the borehole are calculated and discussed.Biot's poroelastic modeling along with three types of boundary conditions for the cylindrical interface including the ideal fluid,empty borehole,and rigid inclusion with a hard boundary is employed for the analysis.Utilizing a proper translational addition theorem for expressing the incident spherical wave in terms of cylindrical wave expansions,the proposed boundary conditions at the interface are satisfied.Stresses are formulated by means of wave potential functions in a three-dimensional(3D)manner.The effects of the frequency and the radial distance between the source and borehole on the induced stresses are examined for the first cylindrical modes over frequency spectra.Two permeability conditions for the interface and three types of soils for the porous formation are considered throughout the analysis.To give an overall outline of the study,a numerical example is presented.The results clearly indicate that the distance is a key parameter and has considerable effects on the induced stress values.In addition,the interface permeability condition and soil characteristics play an important role in determining the dynamic response of the borehole.Finally,the obtained results are compared with the relevant analyses existing in the literature for some limit cases,and good agreement is achieved.
基金supported by the National Natural Science Foundation of China(Grant Nos.12432012 and 12472262)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant Nos.XDB1100000 and XDB0620203)。
文摘The formation of hotspots and ignition phenomena in cavitated explosive particle clouds under shock wave impacts have garnered widespread attention.However,at the mesoscale,under shock wave impact,there is a notable scarcity of research on the deformation,temperature rise patterns,and heat transfer mechanisms of particle clouds.Most studies focus on loading methods such as drop hammer and falling tests.In our study,we introduce a particle motion elastoplastic contact model based on the discrete element method,enabling precise analysis of particle motion and collision behavior.Furthermore,we consider bidirectional coupling between the particle and gas phases,optimizing momentum and energy equations for the particle phase.This approach allows for a detailed analysis of the dynamics and thermodynamics between particles,systematically considering the elastoplastic collision and shear history between particles.Friction,rolling resistance,plastic dissipation,inter-particle heat transfer,and heat transfer between particles and the fluid are regarded as source terms in the energy equation.In this investigation,the deformation behavior and temperature rise process of particle clouds under shock wave impacts are thoroughly discussed.The temporal evolution of particle cloud temperature under shock wave impacts represents a spatiotemporal correlation phenomenon,delineated into two stages:accelerated temperature rise and steady temperature rise,resulting in the formation of symmetric critical hightemperature regions near the cavity perpendicular to the incoming shock wave direction.Notably,during the accelerated temperature rise stage,plastic dissipation,and two-phase heat transfer jointly contribute,whereas during the steady temperature increase stage,heat is primarily provided by two-phase heat transfer.Sustained heat transfer from the high-temperature shock-impacted gas phase to the particle phase acts as the primary mechanism triggering the formation of wide-range high-temperature regions.The role of plastic dissipation is mainly evident in the plastic collisions of particles near the cavity in the early stages.Additionally,we analyze the influence of incoming shock wave Mach numbers on temperature evolution and hot region formation patterns:stronger shock waves lead to quicker completion of the impact process and higher stable average temperatures.Under shock wave impact,the spatiotemporal characteristics of particle clouds differ from the results of the falling process.Prolonged two-phase heat transfer and intense plastic contact among particles near the cavity in the initial stages are factors triggering critical high-temperature regions.
基金Sponsored by the Natural Science Foundation of Shaanxi Province (Grant No. S2025-JC-YB-0532)the Practice and Innovation Funds for Graduate Students of Northwestern Polytechnical University (PF2024044)
文摘Taking a C1x motor with a backward-facing step which can generate a typical corner vortex as a reference,a numerical methodology using large eddy simulation was established in this study.Based on this methodology,the position of the backward-facing step of the motor was computed and analyzed to determine a basic configuration.Two key geometrical parameters,the head cavity angle and submerged nozzle cavity height,were subsequently introduced.Their effects on the corner vortex motion and their interactions with the acoustic pressure downstream of the backward-facing step were analyzed.The phenomena of vortex acoustic coupling and characteristics of pressure oscillations were further explored.The results show that the maximum error between the simulations and experimental data on the dominant frequency of pressure oscillations is 5.23%,which indicates that the numerical methodology built in this study is highly accurate.When the step is located at less than 5/8 of the total length of the combustion chamber,vortex acoustic coupling occurs,which can increase the pressure oscillations in the motor.Both the vorticity and the scale of vortices in the downstream step increase when the head cavity angle is greater than 24°,which increases the amplitude of the pressure oscillation by maximum 63.0%.The submerged nozzle cavity mainly affects the vortices in the cavity itself rather than those in the downstream step.When the height of the cavity increases from 10 to 20 mm,the pressure oscillation amplitude under the main frequency increases by 39.1%.As this height continues to increase,the amplitude of pressure oscillations increases but the primary frequency decreases.
