CO_(2) capture and utilization(CCU)technologies have been recognized as crucial strategies for mitigating global warming,reducing carbon emission,and promoting resource circularity.As such,the design and development o...CO_(2) capture and utilization(CCU)technologies have been recognized as crucial strategies for mitigating global warming,reducing carbon emission,and promoting resource circularity.As such,the design and development of related materials have attracted considerable research attention.Carbon-based materials,characterized by tunable pore structures,abundant active sites,high specific surface area,and excellent chemical stability,demonstrate significant potential for applications in CO_(2) capture and utilization.This review systematically analyzes the adsorption behaviors and performance variations of typical carbon materials,including activated carbon,porous carbon,graphene,and carbon nanotubes during CO_(2) capture processes.Concerning CO_(2) utilization,emphasis is placed on recent advances in the catalytic applications of carbon-based materials in key reactions such as methanation,reverse water-gas shift,dry reforming of methane,and alcohol synthesis.Moreover,the benefits and drawbacks of carbon materials in terms of CO_(2) adsorption capacity,catalytic activity,and stability are thoroughly evaluated,and their potential applications in integrated CO_(2) capture and utilization technologies are discussed.Finally,key strategies for enhancing the performance of carbonaceous materials through structural modulation and surface modification are elucidated.This review aims to provide theoretical guidance for the future development and large-scale implementation of carbon-based materials in CCU technologies.展开更多
The single electron capture processes in Si^(3,4+)+He collisions have been investigated theoretically employing the two-center atomic orbital close-coupling method in the energy range 0.01-100 keV/u.Total and state-se...The single electron capture processes in Si^(3,4+)+He collisions have been investigated theoretically employing the two-center atomic orbital close-coupling method in the energy range 0.01-100 keV/u.Total and state-selective electron capture cross sections for the dominant and subdominant reaction channels are calculated and compared with the available experimental and theoretical data.For the total charge transfer cross sections,the present results show better agreements with the available experimental data than the other theoretical ones in the overlapping energy region for both collision systems.For the state-selective cross sections,the present results for 3s and 3p states are in general agreement with the previous MOCC results in the low energy region for both collision systems.Furthermore,the cross sections for electron captured to the 3d,4l and 5l(l=0,1,...,n-1)states of Si^(2+)and Si^(3+)ions are first provided in a broad energy region in our work.These results are useful for the investigations in astrophysics.The datasets presented in this paper,including the total and state-selective electron capture cross sections of Si^(3,4+)+He collisions in 0.01-100 ke V/u,are openly available at https://doi.org/10.57760/sciencedb.j00113.00257.展开更多
The net capturing method holds great potential for space debris removal due to its adaptability to the various target shapes and high fault tolerance.However,the capture mechanisms of current rope nets,which rely sole...The net capturing method holds great potential for space debris removal due to its adaptability to the various target shapes and high fault tolerance.However,the capture mechanisms of current rope nets,which rely solely on a passive wrap-ping mechanism,limit their capacity to capture objects within a specific size range and make it challenging to handle unexpected situations.Inspired by spider webs,which combine wrapping and adhering to capture prey of various sizes,we present a new type of net(envelope diameter:208.49 mm)for on-orbit capture.This net adopts a spiral symmetric structure similar to spider webs,incorporates electrostatic-microstructure hybrid adhesives,and increases the maximum contact area by 38.31%,allowing it to capture debris ranging from fragments smaller than the mesh size(envelope diam-eter:2.7 mm-4.4 mm)to larger objects(envelope diameter:270 mm),and effectively grasps flexible items(450 mm2),planar items(350 mm2)and three-dimensional items(160 mm3).Moreover,to validate the net's capability for wrapping and adhesion,simulations and experiments are demonstrated that this dual capture method can effectively handle various targets.展开更多
Direct air capture(DAC)is a negative carbon emission technology that faces challenges in scalability and practical deployment due to its exorbitant costs.Hou et al.(2017)integrated DAC technology with fertilization.A ...Direct air capture(DAC)is a negative carbon emission technology that faces challenges in scalability and practical deployment due to its exorbitant costs.Hou et al.(2017)integrated DAC technology with fertilization.A multi-bed desorption system driven by water provides a competitive and sustainable carbon source for indoor agriculture.展开更多
Point source CO_(2) capture(PSCC)is crucial for decarbonizing various industrial sectors,while direct air capture(DAC)holds promise for removing CO_(2) directly from the air.Sorbents play a critical role in both techn...Point source CO_(2) capture(PSCC)is crucial for decarbonizing various industrial sectors,while direct air capture(DAC)holds promise for removing CO_(2) directly from the air.Sorbents play a critical role in both technologies,with their performances,efficiency,cost,etc.,largely depending on which type is used(physical or chemical).Solid amine sorbents(SAS)employed in the chemical adsorption of CO_(2) are suitable for both PSCC and DAC.SAS offer significant advantages over liquid amines such as monoethanolamine(MEA),due to their ability to perform cyclic adsorption–desorption with much lower energy requirement.The environmental concern associated with MEA can be mitigated by SAS.Support materials have a significantly important role in stabilizing amine and enhancing stability and kinetics;varieties of support materials have been screened at a laboratory scale.One promising support material is a silica gel(SG),which is commercially available and attractive for designing cost-effective sorbents for large-scale CO_(2) capture.Various impregnation methods such as physical adsorption and covalent functionalization have been employed to functionalize silica surfaces with amines.This review provided a comprehensive critical analysis of SG-based SAS for CO_(2) capture.We discussed and evaluated them in terms of their adsorption capacity,adsorption,and desorption conditions,and the kinetics involved in these processes.Finally,we proposed a few recommendations for further development of low-cost,lower carbon footprint SAS for large-scale deployment of CO_(2) capture technology.展开更多
Currently,the solid adsorbents with porous structure have been widely applied in CO_(2)capture.However,the unmodified MgO-ZrO_(2)adsorbents appeared to be low adsorption capacity of CO_(2).The solid adsorbent material...Currently,the solid adsorbents with porous structure have been widely applied in CO_(2)capture.However,the unmodified MgO-ZrO_(2)adsorbents appeared to be low adsorption capacity of CO_(2).The solid adsorbent materials were successfully synthesized by loading TEPA onto the pore MgO/ZrO_(2)carriers in the paper.The pore structure and surface characteristic of the samples were analyzed by using XRD,BET,FT-IR and SEM.The adsorbent materials exhibited microcrystalline state,and the crystallinity of all samples gradually decreased as the increase of TEPA content.The pore structure analysis indicated that the modification of MgO-ZrO_(2)adsorbents with TEPA led to the decrease of the specific surface areas,but the narrow micro-mesopore size distributions ranging from 1.8-12 nm in the adsorbents still were maintained.FT-IR spectrum results further verified the successful loading of TEPA.The adsorption capacity of the adsorbents for CO_(2)were tested by using an adsorption apparatus equipped with gas chromatography.The results indicated that when the TEPA loading reached 50%,the sample exhibited the maximum adsorption value for CO_(2),reaching 4.07 mmol/g under the operation condition of 75℃and atmospheric pressure.This result could be assigned to not only the base active sites but also the coexistence of both micropore and mesopore in the adsorbent.After three cycles tests for CO_(2)capture,the adsorption value of the sample for CO_(2)can also reached 95%of its original adsorption capacity,which verified the excellent cyclic operation stability.展开更多
Carbon capture is an important strategy and is implemented to achieve the goals of CO_(2)reduction and carbon neutrality.As a high energy-efficient technology,membrane-based separation plays a crucial role in CO_(2)ca...Carbon capture is an important strategy and is implemented to achieve the goals of CO_(2)reduction and carbon neutrality.As a high energy-efficient technology,membrane-based separation plays a crucial role in CO_(2)capture.It is urgently needed for membrane-based CO_(2)capture to develop the high-performance membrane materials with high permeability,selectivity,and stability.Herein,ultrapermeable carbon molecular sieve(CMS)membranes are fabricated by py roly zing a finely-engineered benzoxazole-containing copolyimide precursor for efficient CO_(2)capture.The microstructure of CMS membrane has been optimized by initially engineering the precursor-chemistry and subsequently tuning the pyrolysis process.Deep insights into the structure-property relationship of CMSs are provided in detail by a combination of experimental characterization and molecular simulations.We demonstrate that the intrinsically high free volume environment of the precursor,coupled with the steric hindrance of thermostable contorted fragments,promotes the formation of loosely packed and ultramicroporous carbon structures within the resultant CMS membrane,thereby enabling efficient CO_(2)discrimination via size sieving and affinity.The membrane achieves an ultrahigh CO_(2)permeability,good selectivity,and excellent stability.After one month of long-term operation,the CO_(2)permeability in the mixed gas is maintained at 11,800 Barrer,with a CO_(2)/N_(2)selectivity exceeding 60.This study provides insights into the relationship between precursor-chemistry and CMS performance,and our ultrapermeable CMS membrane,which is scalable using thin film manufacturing,holds great potential for industrial CO_(2)capture.展开更多
Large-scale deployment of carbon dioxide(CO_(2))removal technology is an essential step to cope with global warming and achieve carbon neutrality.Direct air capture(DAC)has recently received increasing attention given...Large-scale deployment of carbon dioxide(CO_(2))removal technology is an essential step to cope with global warming and achieve carbon neutrality.Direct air capture(DAC)has recently received increasing attention given the high flexibility to remove CO_(2)from discrete sources.Porous materials with adjustable pore characteristics are promising sorbents with low or no latent heat of vaporization.This review article has summarized the recent development of porous sorbents for DAC,with a focus of pore engineering strategy and adsorption mechanism.Physisorbents such as zeolites,porous carbons,metal-organic frameworks(MOFs),and amine-modified chemisorbents have been discussed and their challenges in practical application have been analyzed.At last,future directions have been proposed,and it is expected to inspire collaborations from chemistry,environment,material science and engineering communities.展开更多
Due to the greenhouse effect caused by carbon dioxide(CO_(2))emission,much attention has been paid for the removal of CO_(2).Porous liquids(PLs),as new type of liquid materials,have obvious advantages in mass and heat...Due to the greenhouse effect caused by carbon dioxide(CO_(2))emission,much attention has been paid for the removal of CO_(2).Porous liquids(PLs),as new type of liquid materials,have obvious advantages in mass and heat transfer,which are widely used in gas adsorption and sep-aration.Metal–organic frameworks(MOFs)with merits like large surface area,inherent porous structure and adjustable topology have been considered as one of the best candidates for PLs construction.This review presents the state-of-the-art status on the fabrication strategy of MOFs-based PLs and their CO_(2) absorption and utilization performance,and the positive effects of porosity and functional modification on the absorption-desorption property,selectivity of target product,and regeneration ability are well summarized.Finally,the challenges and prospects for MOFs-based PLs in the optimization of preparation,the coupling of multiple removal techniques,the in situ characterization methods,the regeneration and cycle stability,the environmental impact as well as expansion of application are proposed.展开更多
Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrati...Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrating dual benefits of enhanced energy production and carbon reduction.This study comprehensively described the key influencing factors governing CO_(2)-EOR and geological storage and systematically analyzed reservoir properties,fluid characteristics,and operational parameters.The mech-anisms of these parameters on EOR versus CO_(2) storage performance were investigated throughout CCUS-EOR processes.This paper proposes a coupled two-stage CCUS-EOR process:CO_(2)-EOR storage stage and long-term CO_(2) storage stage after the CO_(2) injection phase is completed.In each stage,the main control factors impacting the CO_(2)-EOR and storage stages are screened and coupled with rigorous technical anal-ysis.The key factors here are reservoir properties,fluid characteristics,and operational parameter.A novel CCUS-EOR synergistic method was proposed to optimize the lifecycle performance of dual objective of EOR and storage.Furthermore,based on multi-objective optimization,considering the lifecycle,a multi-scale techno-economic evaluation method was proposed to fully assess the CCUS-EOR project per-formance.Finally,a set of recommendations for advancing CCUS-EOR technologies by deploying multi-factor/multi-field coupling methodologies,novel green intelligent injection materials,and artificial intel-ligence/machine learning technologies were visited.展开更多
Carbon dioxide accounts for about 80 percent of greenhouse emissions and the increasing CO_(2)emission has been identified as a critical environmental issue.On the other hand,CO_(2)is a potentially renewable resource ...Carbon dioxide accounts for about 80 percent of greenhouse emissions and the increasing CO_(2)emission has been identified as a critical environmental issue.On the other hand,CO_(2)is a potentially renewable resource of a single carbon molecule,and new technologies to utilize CO_(2)in producing net-zero fuels and chemicals are of global interest.Great efforts have been made in the development of new materials and processes for CO_(2)capture and utilization(CCU).Among them,ionic liquids(ILs)have attracted much attention due to their unique characteristics such as high CO_(2)solubility,high ionic conductivity,negligible volatility,non-flammability,wide electrochemical window,and high thermal stability,as well as good solvation ability.This review summarizes the most recent efforts devoted to IL-based absorption,catalysts,and CO_(2)capture and utilization processes.We discuss the factors that affect the interaction between ILs and CO_(2),impacting on the viscosity and CO_(2)solubility and preview the coupling of CO_(2)capture with electrochemical conversion of CO_(2).Finally,we provide an overview on the advantages and disadvantages of the IL-based process for practical applications.展开更多
The reaction characteristics of calcium-based materials during calcium looping(CaL)process are pivotal in the efficiency of CaL thermochemical energy storage(TCES)and CO_(2)capture systems.Currently,metal oxide doping...The reaction characteristics of calcium-based materials during calcium looping(CaL)process are pivotal in the efficiency of CaL thermochemical energy storage(TCES)and CO_(2)capture systems.Currently,metal oxide doping is the primary method to enhance the reaction characteristics of calcium-based materials over multiple cycles.In particular,co-doping with variable-valence metal oxides(VVMOs)can effectively increase the oxygen vacancy content in calcium-based materials,significantly improving their cyclic reaction characteristics.However,there are so numerous VVMOs co-doping schemes that the experimental screening process is complex,consuming considerable time and economic costs.Density functional theory(DFT)calculations have been widely used to reveal the impact of metal oxide doping on the cyclic reaction characteristics of calcium-based materials,with calculation results showing good agreement with experimental conclusions.Nevertheless,there is still a lack of research on utilizing DFT to screen calcium-based materials,and a systematic research methodology has not yet been established.In this study,a systematic DFT-based screening methodology for calcium-based materials was proposed.A series of key parameters for DFT calculations including CO_(2)adsorption energy,oxygen vacancy formation energy,and sintering resistance were proposed.Furthermore,a preliminary mathematical model to predict the CaL TCES and CO_(2)capture performance of calcium-based materials was introduced.The aforementioned DFT method was employed to screen for VVMOs co-doped calcium-based materials.The results revealed that Mn and Ce co-doped calcium-based materials exhibited superior DFT-predicted reaction characteristics.These DFT predictions were validated through experimental assessments of cyclic thermochemical energy storage,CO_(2)capture,and relevant characterization.The outcomes demonstrate a high degree of consistency among DFT-based predictions,experimental results,and characterization.Hence,the DFT-based screening methodology for calcium-based materials proposed herein is a viable solution,poised to offer theoretical insights for the efficient design of calcium-based materials.展开更多
Due to the significant impact of carbon dioxide on global ecology,more efforts have been put into the exploration on CO_(2)capture and utilization.Porous organic framework materials,as a kind of materials with high po...Due to the significant impact of carbon dioxide on global ecology,more efforts have been put into the exploration on CO_(2)capture and utilization.Porous organic framework materials,as a kind of materials with high porosity and designable structure,have been considered as effective host materials for adsorbing carbon dioxide or separating it from other gases.This review gives a deep insight into the applications of metal-organic frameworks,covalent-organic frameworks,and other porous frameworks on CO_(2)capture,focusing on the enhanced capture performances originated from their high surface area with abundant porous structure,functional groups with specific heteroatoms modification,or other building unit interactions.Besides,the main challenges associated with porous frameworks for CO_(2)capture and proposed strategies to address these obstacles,including the structural design strategy or the capture mechanism exploration,have been demonstrated and emphasized.This review can contribute to further investigation on porous frameworks for gas capture and separation with enhanced performance and efficiency.展开更多
Catalyst-aided regeneration is a promising method for reducing the high regeneration energy consumption of amine-based CO_(2)capture technologies.However,the intrinsic relationship between the properties of the acidic...Catalyst-aided regeneration is a promising method for reducing the high regeneration energy consumption of amine-based CO_(2)capture technologies.However,the intrinsic relationship between the properties of the acidic sites and their catalytic activity is controversial.In this study,a series of W-based catalysts supported by ZrTiO_(x)were synthesised,and the effects of the intensity,distribution,and type of acid sites were systematically investigated by quantitatively regulating the acidic site properties.The results indicate stronger acidic sites play a more important role in the catalytic reaction.Moreover,the catalysts showed excellent performance only if the Br?nsted acid sites(BASs)and Lewis acid sites(LASs)coexisted.During the catalytic reaction,the BASs facilitated deprotonation,and the LASs promoted the decomposition of carbamates.The ratio of BASs to LASs(B/L)was a critical factor for catalytic activity,wherein optimal performance was achieved when the B/L ratio was close to 1.The 10%HPW/ZrTiO_(x)composite performed better than WO_(3)/ZrTiO_(x)and HSiW/ZrTiO_(x)because it had a stronger acid intensity and a suitable B/L ratio.As a result,the relative heat duty was reduced by 47%compared to 30%aqueous MEA,and the maximum CO_(2)desorption rate was increased by 83%.The Bader charge indicated that the W atoms of HPW/ZrTiO_(x)lost more electrons(0.18)than those of WO_(3)/ZrTiO_(x),which can weaken the O±H bond energy.Consequently,the calculated deprotonation energy is as low as 257 kJ mol^(-1)for HPW/ZrTiO_(x).展开更多
CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voir...CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.展开更多
The non-aqueous solid-liquid biphasic solvent of 2-amino-2-methyl-1-propanol(AMP)/piperazine(PZ)/dipropylene glycol dimethyl ether(DME)features a high CO_(2)absorption loading,favorable phase separation behavior and h...The non-aqueous solid-liquid biphasic solvent of 2-amino-2-methyl-1-propanol(AMP)/piperazine(PZ)/dipropylene glycol dimethyl ether(DME)features a high CO_(2)absorption loading,favorable phase separation behavior and high regeneration efficiency.Different with the liquid-liquid phase change solvent,the reaction kinetics of CO_(2)capture into solid-liquid biphasic solvent was rarely studied.In the present work,the reaction kinetics of CO_(2)absorption into AMP/PZ/DME solid-liquid biphasic solvent was investigated into the double stirred kettle reactor.The absorption reaction followed a pseudo-first-order kinetic model according to the zwitterion mechanism.The overall reaction rate constant(kov)and the enhancement factor(E)of CO_(2)absorption both increased with increasing temperature.The total mass transfer resistance of the absorbent decreased with increasing temperature and increased with increasing absorption loading,so the higher reaction temperature was conducive to the absorption,and the liquid phase mass transfer resistance was the main factor affecting the absorption rate.展开更多
CO_(2)capture and utilization(CCU)are two important processes to address the gigaton challenges in reducing greenhouse gas emissions.Given that both processes are energy-intensive,integrating CO_(2)capture and utiliza...CO_(2)capture and utilization(CCU)are two important processes to address the gigaton challenges in reducing greenhouse gas emissions.Given that both processes are energy-intensive,integrating CO_(2)capture and utilization(ICCU)can improve energy efficiency and reduce economic costs by eliminating steps such as CO_(2)concentration,storage,or capture media regeneration.Aiming at building a bridge between theoretical research and practical application,this review promotes the understanding of high-temperature ICCU,mild/low-temperature ICCU,and emerging electro-/photo-driven ICCU.The reaction mechanism and technical bottleneck are comprehensively evaluated,which could provide a perspective on the design principle of dualfunctional materials(DFMs)combining synergetic adsorptive and catalytic sites.On this basis,novel strategies are proposed from the viewpoint of chemical process intensification to strive for a thermodynamics and kinetics matching between the capture and in situ conversion processes.It is expected that this review can stimulate more research in the future involving expanding the product range,fabricating long-term DFMs,developing a workable reactor,optimizing operation conditions,and establishing an industrial demonstration.展开更多
The objective of this study is to propose an optimal plant design for blue hydrogen production aboard a liquefiednatural gas(LNG)carrier.This investigation focuses on integrating two distinct processes—steam methaner...The objective of this study is to propose an optimal plant design for blue hydrogen production aboard a liquefiednatural gas(LNG)carrier.This investigation focuses on integrating two distinct processes—steam methanereforming(SMR)and ship-based carbon capture(SBCC).The first refers to the common practice used to obtainhydrogen from methane(often derived from natural gas),where steam reacts with methane to produce hydrogenand carbon dioxide(CO_(2)).The second refers to capturing the CO_(2) generated during the SMR process on boardships.By capturing and storing the carbon emissions,the process significantly reduces its environmental impact,making the hydrogen production“blue,”as opposed to“grey”(which involves CO_(2) emissions without capture).For the SMR process,the analysis reveals that increasing the reformer temperature enhances both the processperformance and CO_(2) emissions.Conversely,a higher steam-to-carbon(s/c)ratio reduces hydrogen yield,therebydecreasing thermal efficiency.The study also shows that preheating the air and boil-off gas(BOG)before theyenter the combustion chamber boosts overall efficiency and curtails CO_(2) emissions.In the SBCC process,puremonoethanolamine(MEA)is employed to capture the CO_(2) generated by the exhaust gases from the SMR process.The results indicate that with a 90%CO_(2) capture rate,the associated heat consumption amounts to 4.6 MJ perkilogram of CO_(2) captured.This combined approach offers a viable pathway to produce blue hydrogen on LNGcarriers while significantly reducing the carbon footprint.展开更多
The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace K...The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace KOH-catalyzed CO_(2) activation.Comprehensive investigations were conducted on three aspects:physicochemical structure evolution of biochar,mechanistic understanding of trace KOH-facilitated CO_(2) activation processes,and application characteristics for CO_(2) adsorption.Results demonstrate that biochar activated by trace KOH(<10%)and CO_(2) achieves comparable specific surface area(1244.09 m^(2)/g)to that obtained with 100%KOH activation(1425.10 m^(2)/g).The pore structure characteristics(specific surface area and pore volume)are governed by CO and CH4 generated through K-salt catalyzed reactions between CO_(2) and biochar.The optimal CO_(2) adsorption capacities of KBC adsorbent reached 4.70 mmol/g(0℃)and 7.25 mmol/g(25℃),representing the maximum values among comparable carbon adsorbents.The 5%KBC-CO_(2) sample exhibited CO_(2) adsorption capacities of 3.19 and 5.01 mmol/g under respective conditions,attaining current average performance levels.Notably,CO_(2)/N_(2) selectivity(85∶15,volume ratio)reached 64.71 at 0.02 bar with robust cycling stability.Molecular dynamics simulations revealed that oxygen-containing functional groups accelerate CO_(2) adsorption kinetics and enhance micropore storage capacity.This technical route offers simplicity,environmental compatibility,and scalability,providing critical references for large-scale preparation of high-quality carbon materials.展开更多
基金Supported by National Key R&D Program of China(2025YFE0109700)the National Natural Science Foundation of China(52106150)。
文摘CO_(2) capture and utilization(CCU)technologies have been recognized as crucial strategies for mitigating global warming,reducing carbon emission,and promoting resource circularity.As such,the design and development of related materials have attracted considerable research attention.Carbon-based materials,characterized by tunable pore structures,abundant active sites,high specific surface area,and excellent chemical stability,demonstrate significant potential for applications in CO_(2) capture and utilization.This review systematically analyzes the adsorption behaviors and performance variations of typical carbon materials,including activated carbon,porous carbon,graphene,and carbon nanotubes during CO_(2) capture processes.Concerning CO_(2) utilization,emphasis is placed on recent advances in the catalytic applications of carbon-based materials in key reactions such as methanation,reverse water-gas shift,dry reforming of methane,and alcohol synthesis.Moreover,the benefits and drawbacks of carbon materials in terms of CO_(2) adsorption capacity,catalytic activity,and stability are thoroughly evaluated,and their potential applications in integrated CO_(2) capture and utilization technologies are discussed.Finally,key strategies for enhancing the performance of carbonaceous materials through structural modulation and surface modification are elucidated.This review aims to provide theoretical guidance for the future development and large-scale implementation of carbon-based materials in CCU technologies.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFA1602504)the National Natural Science Foundation of China(Grant Nos.12274040 and U2430208)。
文摘The single electron capture processes in Si^(3,4+)+He collisions have been investigated theoretically employing the two-center atomic orbital close-coupling method in the energy range 0.01-100 keV/u.Total and state-selective electron capture cross sections for the dominant and subdominant reaction channels are calculated and compared with the available experimental and theoretical data.For the total charge transfer cross sections,the present results show better agreements with the available experimental data than the other theoretical ones in the overlapping energy region for both collision systems.For the state-selective cross sections,the present results for 3s and 3p states are in general agreement with the previous MOCC results in the low energy region for both collision systems.Furthermore,the cross sections for electron captured to the 3d,4l and 5l(l=0,1,...,n-1)states of Si^(2+)and Si^(3+)ions are first provided in a broad energy region in our work.These results are useful for the investigations in astrophysics.The datasets presented in this paper,including the total and state-selective electron capture cross sections of Si^(3,4+)+He collisions in 0.01-100 ke V/u,are openly available at https://doi.org/10.57760/sciencedb.j00113.00257.
基金the New Chongqing Innovative Young Talent Project under Grant 2024NSCQ-qncxX0468Dreams Foundation of Jianghuai Advance Technology Center under Grant 2023-ZM01Z007.
文摘The net capturing method holds great potential for space debris removal due to its adaptability to the various target shapes and high fault tolerance.However,the capture mechanisms of current rope nets,which rely solely on a passive wrap-ping mechanism,limit their capacity to capture objects within a specific size range and make it challenging to handle unexpected situations.Inspired by spider webs,which combine wrapping and adhering to capture prey of various sizes,we present a new type of net(envelope diameter:208.49 mm)for on-orbit capture.This net adopts a spiral symmetric structure similar to spider webs,incorporates electrostatic-microstructure hybrid adhesives,and increases the maximum contact area by 38.31%,allowing it to capture debris ranging from fragments smaller than the mesh size(envelope diam-eter:2.7 mm-4.4 mm)to larger objects(envelope diameter:270 mm),and effectively grasps flexible items(450 mm2),planar items(350 mm2)and three-dimensional items(160 mm3).Moreover,to validate the net's capability for wrapping and adhesion,simulations and experiments are demonstrated that this dual capture method can effectively handle various targets.
基金supported by the National Natural Science Foundation of China(No.52276022).
文摘Direct air capture(DAC)is a negative carbon emission technology that faces challenges in scalability and practical deployment due to its exorbitant costs.Hou et al.(2017)integrated DAC technology with fertilization.A multi-bed desorption system driven by water provides a competitive and sustainable carbon source for indoor agriculture.
基金financial support from Business Finland 8205/31/2022the Magnus Ehrnrooth Foundation for financial support.
文摘Point source CO_(2) capture(PSCC)is crucial for decarbonizing various industrial sectors,while direct air capture(DAC)holds promise for removing CO_(2) directly from the air.Sorbents play a critical role in both technologies,with their performances,efficiency,cost,etc.,largely depending on which type is used(physical or chemical).Solid amine sorbents(SAS)employed in the chemical adsorption of CO_(2) are suitable for both PSCC and DAC.SAS offer significant advantages over liquid amines such as monoethanolamine(MEA),due to their ability to perform cyclic adsorption–desorption with much lower energy requirement.The environmental concern associated with MEA can be mitigated by SAS.Support materials have a significantly important role in stabilizing amine and enhancing stability and kinetics;varieties of support materials have been screened at a laboratory scale.One promising support material is a silica gel(SG),which is commercially available and attractive for designing cost-effective sorbents for large-scale CO_(2) capture.Various impregnation methods such as physical adsorption and covalent functionalization have been employed to functionalize silica surfaces with amines.This review provided a comprehensive critical analysis of SG-based SAS for CO_(2) capture.We discussed and evaluated them in terms of their adsorption capacity,adsorption,and desorption conditions,and the kinetics involved in these processes.Finally,we proposed a few recommendations for further development of low-cost,lower carbon footprint SAS for large-scale deployment of CO_(2) capture technology.
基金supported by Shanxi Provincial Key Research and Development Project(202102090301026)Graduate Education Innovation Project of Taiyuan University of Science and Technology(SY2023024)。
文摘Currently,the solid adsorbents with porous structure have been widely applied in CO_(2)capture.However,the unmodified MgO-ZrO_(2)adsorbents appeared to be low adsorption capacity of CO_(2).The solid adsorbent materials were successfully synthesized by loading TEPA onto the pore MgO/ZrO_(2)carriers in the paper.The pore structure and surface characteristic of the samples were analyzed by using XRD,BET,FT-IR and SEM.The adsorbent materials exhibited microcrystalline state,and the crystallinity of all samples gradually decreased as the increase of TEPA content.The pore structure analysis indicated that the modification of MgO-ZrO_(2)adsorbents with TEPA led to the decrease of the specific surface areas,but the narrow micro-mesopore size distributions ranging from 1.8-12 nm in the adsorbents still were maintained.FT-IR spectrum results further verified the successful loading of TEPA.The adsorption capacity of the adsorbents for CO_(2)were tested by using an adsorption apparatus equipped with gas chromatography.The results indicated that when the TEPA loading reached 50%,the sample exhibited the maximum adsorption value for CO_(2),reaching 4.07 mmol/g under the operation condition of 75℃and atmospheric pressure.This result could be assigned to not only the base active sites but also the coexistence of both micropore and mesopore in the adsorbent.After three cycles tests for CO_(2)capture,the adsorption value of the sample for CO_(2)can also reached 95%of its original adsorption capacity,which verified the excellent cyclic operation stability.
基金financial support from the National Key R&D Program of China(2021YFB3801200)the National Natural Science Foundation of China(22278051,22178044,22308043)CNPC Innovation Found(2022DQ02-0608)。
文摘Carbon capture is an important strategy and is implemented to achieve the goals of CO_(2)reduction and carbon neutrality.As a high energy-efficient technology,membrane-based separation plays a crucial role in CO_(2)capture.It is urgently needed for membrane-based CO_(2)capture to develop the high-performance membrane materials with high permeability,selectivity,and stability.Herein,ultrapermeable carbon molecular sieve(CMS)membranes are fabricated by py roly zing a finely-engineered benzoxazole-containing copolyimide precursor for efficient CO_(2)capture.The microstructure of CMS membrane has been optimized by initially engineering the precursor-chemistry and subsequently tuning the pyrolysis process.Deep insights into the structure-property relationship of CMSs are provided in detail by a combination of experimental characterization and molecular simulations.We demonstrate that the intrinsically high free volume environment of the precursor,coupled with the steric hindrance of thermostable contorted fragments,promotes the formation of loosely packed and ultramicroporous carbon structures within the resultant CMS membrane,thereby enabling efficient CO_(2)discrimination via size sieving and affinity.The membrane achieves an ultrahigh CO_(2)permeability,good selectivity,and excellent stability.After one month of long-term operation,the CO_(2)permeability in the mixed gas is maintained at 11,800 Barrer,with a CO_(2)/N_(2)selectivity exceeding 60.This study provides insights into the relationship between precursor-chemistry and CMS performance,and our ultrapermeable CMS membrane,which is scalable using thin film manufacturing,holds great potential for industrial CO_(2)capture.
基金financial support from the National Natural Science Foundation of China(Nos.22278011,22225803,22038001 and 22108007)Beijing Natural Science Foundation(No.Z230023)+1 种基金The Science&Technology Project of Beijing Municipal Education Committee(No.KZ201810005004)Beijing Nova Program(No.Z211100002121094)。
文摘Large-scale deployment of carbon dioxide(CO_(2))removal technology is an essential step to cope with global warming and achieve carbon neutrality.Direct air capture(DAC)has recently received increasing attention given the high flexibility to remove CO_(2)from discrete sources.Porous materials with adjustable pore characteristics are promising sorbents with low or no latent heat of vaporization.This review article has summarized the recent development of porous sorbents for DAC,with a focus of pore engineering strategy and adsorption mechanism.Physisorbents such as zeolites,porous carbons,metal-organic frameworks(MOFs),and amine-modified chemisorbents have been discussed and their challenges in practical application have been analyzed.At last,future directions have been proposed,and it is expected to inspire collaborations from chemistry,environment,material science and engineering communities.
基金supported by the Natural Science Foundation of China(22106007 and U23A20120)Beijing Natural Science Foundation(8244060)+2 种基金China Postdoctoral Science Foundation(2023M730143)R&D Program of BeijingMunicipal Education Commission(KZ202210005011)Natural Science Foundation of Hebei Province(B2021208033).
文摘Due to the greenhouse effect caused by carbon dioxide(CO_(2))emission,much attention has been paid for the removal of CO_(2).Porous liquids(PLs),as new type of liquid materials,have obvious advantages in mass and heat transfer,which are widely used in gas adsorption and sep-aration.Metal–organic frameworks(MOFs)with merits like large surface area,inherent porous structure and adjustable topology have been considered as one of the best candidates for PLs construction.This review presents the state-of-the-art status on the fabrication strategy of MOFs-based PLs and their CO_(2) absorption and utilization performance,and the positive effects of porosity and functional modification on the absorption-desorption property,selectivity of target product,and regeneration ability are well summarized.Finally,the challenges and prospects for MOFs-based PLs in the optimization of preparation,the coupling of multiple removal techniques,the in situ characterization methods,the regeneration and cycle stability,the environmental impact as well as expansion of application are proposed.
基金the financial support from the National Key Research and Development Program of China(2022YFE0206700)the Science Foundation of China University of Petroleum,Beijing(2462021YJRC012).
文摘Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrating dual benefits of enhanced energy production and carbon reduction.This study comprehensively described the key influencing factors governing CO_(2)-EOR and geological storage and systematically analyzed reservoir properties,fluid characteristics,and operational parameters.The mech-anisms of these parameters on EOR versus CO_(2) storage performance were investigated throughout CCUS-EOR processes.This paper proposes a coupled two-stage CCUS-EOR process:CO_(2)-EOR storage stage and long-term CO_(2) storage stage after the CO_(2) injection phase is completed.In each stage,the main control factors impacting the CO_(2)-EOR and storage stages are screened and coupled with rigorous technical anal-ysis.The key factors here are reservoir properties,fluid characteristics,and operational parameter.A novel CCUS-EOR synergistic method was proposed to optimize the lifecycle performance of dual objective of EOR and storage.Furthermore,based on multi-objective optimization,considering the lifecycle,a multi-scale techno-economic evaluation method was proposed to fully assess the CCUS-EOR project per-formance.Finally,a set of recommendations for advancing CCUS-EOR technologies by deploying multi-factor/multi-field coupling methodologies,novel green intelligent injection materials,and artificial intel-ligence/machine learning technologies were visited.
基金supported by the National Natural Science Foundation of China(21972027)the Foshan Xianhu Laboratory(41220103,41210501,XHD2021-001,XHD2022001,492305,472303)。
文摘Carbon dioxide accounts for about 80 percent of greenhouse emissions and the increasing CO_(2)emission has been identified as a critical environmental issue.On the other hand,CO_(2)is a potentially renewable resource of a single carbon molecule,and new technologies to utilize CO_(2)in producing net-zero fuels and chemicals are of global interest.Great efforts have been made in the development of new materials and processes for CO_(2)capture and utilization(CCU).Among them,ionic liquids(ILs)have attracted much attention due to their unique characteristics such as high CO_(2)solubility,high ionic conductivity,negligible volatility,non-flammability,wide electrochemical window,and high thermal stability,as well as good solvation ability.This review summarizes the most recent efforts devoted to IL-based absorption,catalysts,and CO_(2)capture and utilization processes.We discuss the factors that affect the interaction between ILs and CO_(2),impacting on the viscosity and CO_(2)solubility and preview the coupling of CO_(2)capture with electrochemical conversion of CO_(2).Finally,we provide an overview on the advantages and disadvantages of the IL-based process for practical applications.
基金supported by the National Natural Science Foundation of China(52276204 and U22A20435)。
文摘The reaction characteristics of calcium-based materials during calcium looping(CaL)process are pivotal in the efficiency of CaL thermochemical energy storage(TCES)and CO_(2)capture systems.Currently,metal oxide doping is the primary method to enhance the reaction characteristics of calcium-based materials over multiple cycles.In particular,co-doping with variable-valence metal oxides(VVMOs)can effectively increase the oxygen vacancy content in calcium-based materials,significantly improving their cyclic reaction characteristics.However,there are so numerous VVMOs co-doping schemes that the experimental screening process is complex,consuming considerable time and economic costs.Density functional theory(DFT)calculations have been widely used to reveal the impact of metal oxide doping on the cyclic reaction characteristics of calcium-based materials,with calculation results showing good agreement with experimental conclusions.Nevertheless,there is still a lack of research on utilizing DFT to screen calcium-based materials,and a systematic research methodology has not yet been established.In this study,a systematic DFT-based screening methodology for calcium-based materials was proposed.A series of key parameters for DFT calculations including CO_(2)adsorption energy,oxygen vacancy formation energy,and sintering resistance were proposed.Furthermore,a preliminary mathematical model to predict the CaL TCES and CO_(2)capture performance of calcium-based materials was introduced.The aforementioned DFT method was employed to screen for VVMOs co-doped calcium-based materials.The results revealed that Mn and Ce co-doped calcium-based materials exhibited superior DFT-predicted reaction characteristics.These DFT predictions were validated through experimental assessments of cyclic thermochemical energy storage,CO_(2)capture,and relevant characterization.The outcomes demonstrate a high degree of consistency among DFT-based predictions,experimental results,and characterization.Hence,the DFT-based screening methodology for calcium-based materials proposed herein is a viable solution,poised to offer theoretical insights for the efficient design of calcium-based materials.
基金the Natural Science Foundation of Shanghai(23ZR1422600)the Innovative research team of high-level local university in Shanghai for their financial support.
文摘Due to the significant impact of carbon dioxide on global ecology,more efforts have been put into the exploration on CO_(2)capture and utilization.Porous organic framework materials,as a kind of materials with high porosity and designable structure,have been considered as effective host materials for adsorbing carbon dioxide or separating it from other gases.This review gives a deep insight into the applications of metal-organic frameworks,covalent-organic frameworks,and other porous frameworks on CO_(2)capture,focusing on the enhanced capture performances originated from their high surface area with abundant porous structure,functional groups with specific heteroatoms modification,or other building unit interactions.Besides,the main challenges associated with porous frameworks for CO_(2)capture and proposed strategies to address these obstacles,including the structural design strategy or the capture mechanism exploration,have been demonstrated and emphasized.This review can contribute to further investigation on porous frameworks for gas capture and separation with enhanced performance and efficiency.
基金supported by the National Natural Science Foundation of China(No.52100133,No.52222005)the Key R&D Program of Yunnan Province(No.202303AC100008)。
文摘Catalyst-aided regeneration is a promising method for reducing the high regeneration energy consumption of amine-based CO_(2)capture technologies.However,the intrinsic relationship between the properties of the acidic sites and their catalytic activity is controversial.In this study,a series of W-based catalysts supported by ZrTiO_(x)were synthesised,and the effects of the intensity,distribution,and type of acid sites were systematically investigated by quantitatively regulating the acidic site properties.The results indicate stronger acidic sites play a more important role in the catalytic reaction.Moreover,the catalysts showed excellent performance only if the Br?nsted acid sites(BASs)and Lewis acid sites(LASs)coexisted.During the catalytic reaction,the BASs facilitated deprotonation,and the LASs promoted the decomposition of carbamates.The ratio of BASs to LASs(B/L)was a critical factor for catalytic activity,wherein optimal performance was achieved when the B/L ratio was close to 1.The 10%HPW/ZrTiO_(x)composite performed better than WO_(3)/ZrTiO_(x)and HSiW/ZrTiO_(x)because it had a stronger acid intensity and a suitable B/L ratio.As a result,the relative heat duty was reduced by 47%compared to 30%aqueous MEA,and the maximum CO_(2)desorption rate was increased by 83%.The Bader charge indicated that the W atoms of HPW/ZrTiO_(x)lost more electrons(0.18)than those of WO_(3)/ZrTiO_(x),which can weaken the O±H bond energy.Consequently,the calculated deprotonation energy is as low as 257 kJ mol^(-1)for HPW/ZrTiO_(x).
基金Lin Du acknowledges the financial support provided by China Scholarship Council(CSC)via a Ph.D.Scholarship(202008510128)supported by Core Technology Project of China National Petroleum Corporation(CNPC)"Research on Thermal Miscible Flooding Technology"(2023ZG18)。
文摘CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.
基金supported by the National Natural Science Foundation of China(No.22276064)the Youth Innovation Grant of Xiamen,Fujian Province(No.3502Z20206006)+1 种基金the MOE Key Laboratory of Resources and Environmental System Optimization(No.KLRE-KF202205)Fujian Science and Technology Project(No.2022Y3007).
文摘The non-aqueous solid-liquid biphasic solvent of 2-amino-2-methyl-1-propanol(AMP)/piperazine(PZ)/dipropylene glycol dimethyl ether(DME)features a high CO_(2)absorption loading,favorable phase separation behavior and high regeneration efficiency.Different with the liquid-liquid phase change solvent,the reaction kinetics of CO_(2)capture into solid-liquid biphasic solvent was rarely studied.In the present work,the reaction kinetics of CO_(2)absorption into AMP/PZ/DME solid-liquid biphasic solvent was investigated into the double stirred kettle reactor.The absorption reaction followed a pseudo-first-order kinetic model according to the zwitterion mechanism.The overall reaction rate constant(kov)and the enhancement factor(E)of CO_(2)absorption both increased with increasing temperature.The total mass transfer resistance of the absorbent decreased with increasing temperature and increased with increasing absorption loading,so the higher reaction temperature was conducive to the absorption,and the liquid phase mass transfer resistance was the main factor affecting the absorption rate.
基金supported by the National Natural Science Foundation(22478016,22288102).
文摘CO_(2)capture and utilization(CCU)are two important processes to address the gigaton challenges in reducing greenhouse gas emissions.Given that both processes are energy-intensive,integrating CO_(2)capture and utilization(ICCU)can improve energy efficiency and reduce economic costs by eliminating steps such as CO_(2)concentration,storage,or capture media regeneration.Aiming at building a bridge between theoretical research and practical application,this review promotes the understanding of high-temperature ICCU,mild/low-temperature ICCU,and emerging electro-/photo-driven ICCU.The reaction mechanism and technical bottleneck are comprehensively evaluated,which could provide a perspective on the design principle of dualfunctional materials(DFMs)combining synergetic adsorptive and catalytic sites.On this basis,novel strategies are proposed from the viewpoint of chemical process intensification to strive for a thermodynamics and kinetics matching between the capture and in situ conversion processes.It is expected that this review can stimulate more research in the future involving expanding the product range,fabricating long-term DFMs,developing a workable reactor,optimizing operation conditions,and establishing an industrial demonstration.
文摘The objective of this study is to propose an optimal plant design for blue hydrogen production aboard a liquefiednatural gas(LNG)carrier.This investigation focuses on integrating two distinct processes—steam methanereforming(SMR)and ship-based carbon capture(SBCC).The first refers to the common practice used to obtainhydrogen from methane(often derived from natural gas),where steam reacts with methane to produce hydrogenand carbon dioxide(CO_(2)).The second refers to capturing the CO_(2) generated during the SMR process on boardships.By capturing and storing the carbon emissions,the process significantly reduces its environmental impact,making the hydrogen production“blue,”as opposed to“grey”(which involves CO_(2) emissions without capture).For the SMR process,the analysis reveals that increasing the reformer temperature enhances both the processperformance and CO_(2) emissions.Conversely,a higher steam-to-carbon(s/c)ratio reduces hydrogen yield,therebydecreasing thermal efficiency.The study also shows that preheating the air and boil-off gas(BOG)before theyenter the combustion chamber boosts overall efficiency and curtails CO_(2) emissions.In the SBCC process,puremonoethanolamine(MEA)is employed to capture the CO_(2) generated by the exhaust gases from the SMR process.The results indicate that with a 90%CO_(2) capture rate,the associated heat consumption amounts to 4.6 MJ perkilogram of CO_(2) captured.This combined approach offers a viable pathway to produce blue hydrogen on LNGcarriers while significantly reducing the carbon footprint.
基金supported by the National Natural Science Foundation of China(52376103,542B2081).
文摘The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace KOH-catalyzed CO_(2) activation.Comprehensive investigations were conducted on three aspects:physicochemical structure evolution of biochar,mechanistic understanding of trace KOH-facilitated CO_(2) activation processes,and application characteristics for CO_(2) adsorption.Results demonstrate that biochar activated by trace KOH(<10%)and CO_(2) achieves comparable specific surface area(1244.09 m^(2)/g)to that obtained with 100%KOH activation(1425.10 m^(2)/g).The pore structure characteristics(specific surface area and pore volume)are governed by CO and CH4 generated through K-salt catalyzed reactions between CO_(2) and biochar.The optimal CO_(2) adsorption capacities of KBC adsorbent reached 4.70 mmol/g(0℃)and 7.25 mmol/g(25℃),representing the maximum values among comparable carbon adsorbents.The 5%KBC-CO_(2) sample exhibited CO_(2) adsorption capacities of 3.19 and 5.01 mmol/g under respective conditions,attaining current average performance levels.Notably,CO_(2)/N_(2) selectivity(85∶15,volume ratio)reached 64.71 at 0.02 bar with robust cycling stability.Molecular dynamics simulations revealed that oxygen-containing functional groups accelerate CO_(2) adsorption kinetics and enhance micropore storage capacity.This technical route offers simplicity,environmental compatibility,and scalability,providing critical references for large-scale preparation of high-quality carbon materials.
