Kirchhoff integral migration imaging is widely used in industrial production due to its advantages of not being limited by observation systems,good target imaging effects,and high computational efficiency.Vertical tra...Kirchhoff integral migration imaging is widely used in industrial production due to its advantages of not being limited by observation systems,good target imaging effects,and high computational efficiency.Vertical transversely isotropic(VTI)media,as a typical anisotropic media,has always been a primary focus of anisotropic migration imaging research.We focus on the problems of low accuracy and efficiency in travel-time calculations associated with conventional Kirchhoff integral migration for VTI media.A travel-time calculation method based on physical-informed neural network(PINN)for VTI media is introduced into the process of Kirchhoff integral migration imaging.Model experiments and field data processing have shown that the travel-time calculation based on PINN can significantly improve both the accuracy and efficiency when compared to traditional finite difference algorithms,there-by enabling high-precision Kirchhoff integral migration imaging for VTI media.展开更多
BACKGROUND The common clinical method to evaluate blood loss during pancreaticoduoden-ectomy(PD)is visual inspection,but most scholars believe that this method is extremely subjective and inaccurate.Currently,there is...BACKGROUND The common clinical method to evaluate blood loss during pancreaticoduoden-ectomy(PD)is visual inspection,but most scholars believe that this method is extremely subjective and inaccurate.Currently,there is no accurate,objective me-thod to evaluate the amount of blood loss in PD patients.We retrospectively analyzed the clinical data of 341 patients who underwent PD in Shandong Provincial Hospital from March 2017 to February 2019.According to different surgical methods,they were divided into an open PD(OPD)group and a laparoscopic PD(LPD)group.The differences and correlations between the in-traoperative estimation of blood loss(IEBL)obtained by visual inspection and the intraoperative calculation of blood loss(ICBL)obtained using the Hb loss method were analyzed.ICBL,IEBL and perioperative calculation of blood loss(PCBL)were compared between the two groups,and single-factor regression analysis was performed.RESULTS There was no statistically significant difference in the preoperative general patient information between the two groups(P>0.05).PD had an ICBL of 743.2(393.0,1173.1)mL and an IEBL of 100.0(50.0,300.0)mL(P<0.001).There was also a certain correlation between the two(r=0.312,P<0.001).Single-factor analysis of ICBL showed that a history of diabetes[95%confidence interval(CI):53.82-549.62;P=0.017]was an independent risk factor for ICBL.In addition,the single-factor analysis of PCBL showed that body mass index(BMI)(95%CI:0.62-76.75;P=0.046)and preoperative total bilirubin>200μmol/L(95%CI:7.09-644.26;P=0.045)were independent risk factors for PCBL.The ICBLs of the LPD group and OPD group were 767.7(435.4,1249.0)mL and 663.8(347.7,1138.2)mL,respectively(P>0.05).The IEBL of the LPD group 200.0(50.0,200.0)mL was slightly greater than that of the OPD group 100.0(50.0,300.0)mL(P>0.05).PCBL was greater in the LPD group than the OPD group[1061.6(612.3,1632.3)mL vs 806.1(375.9,1347.6)mL](P<0.05).CONCLUSION The ICBL in patients who underwent PD was greater than the IEBL,but there is a certain correlation between the two.The Hb loss method can be used to evaluate intraoperative blood loss.A history of diabetes,preoperative bilirubin>200μmol/L and high BMI increase the patient's risk of bleeding.展开更多
An integrated calculated approach based on weakly coupled finite element(FEM)-viscoplastic selfconsistent(VPSC)model was established to simulate the texture evolution during the variable strain path extrusion process ...An integrated calculated approach based on weakly coupled finite element(FEM)-viscoplastic selfconsistent(VPSC)model was established to simulate the texture evolution during the variable strain path extrusion process of magnesium alloys.The spiral die extrusion(SDE)process with additional circumferential shear deformation was applied to investigate the effect of path control on texture adjustment and verify the accuracy of the model.The results indicated that the additional spiral shear resulting from the overall inclined flow path effectively reduced the intensity of the{0002}//ED fiber texture by suppressing basal slip activation in the core area,while the local shear deformation along the spiral equal channel strain path led to the formation of an inclined{0002}//ND plane texture on the side.Using the modified Hall-Petch relationship,the correlation between texture and yield strength was quantified.Specifically,the weakening of the texture effectively suppressed{10-12}tensile twinning,which compensated for the deficiency of compressive yield strength without significantly sacrificing tensile yield strength,and thus improved the tension-compression asymmetry.Furthermore,the strongly inclined{0002}//ND plane texture inhibited the widespread activation of basal slip during tensile yielding,thereby enhancing the yield strength.展开更多
The calculated and experimental research of sheet resistances of crystalline silicon solar cells by dry laser doping is investigated. The nonlinear numerical model on laser melting of crystalline silicon and liquid-ph...The calculated and experimental research of sheet resistances of crystalline silicon solar cells by dry laser doping is investigated. The nonlinear numerical model on laser melting of crystalline silicon and liquid-phase diffusion of phosphorus atoms by dry laser doping is analyzed by the finite difference method implemented in MATLAB. The melting period and melting depth of crystalline silicon as a function of laser energy density is achieved. The effective liquid-phase diffusion of phosphorus atoms in melting silicon by dry laser doping is confirmed by the rapid decrease of sheet resistances in experimental measurement. The plateau of sheet resistances is reached at around 15 Ω/. The calculated sheet resistances as a function of laser energy density is obtained and the calculated results are in good agreement with the corresponding experimental measurement. Due to the successful verification by comparison between experimental measurement and calculated results, the simulation results could be used to optimize the virtual laser doping parameters.展开更多
We investigate the geometries and energies of seven electronic states X-1A1, A1B1, a-3B1, B-1A2,b-3A2, C1B2 and c-3B2 of CF2 carbene using internally contracted multireference configuration interaction methods includi...We investigate the geometries and energies of seven electronic states X-1A1, A1B1, a-3B1, B-1A2,b-3A2, C1B2 and c-3B2 of CF2 carbene using internally contracted multireference configuration interaction methods including Davidson correction （icMRCIq-Q） with different basis sets aug-cc-pVXZ （X=T, Q, 5）. For the first time, the potential energy curves of electronic states of CF2 related icMRCI＋Q/aug-cc-pVTZ level. The ab initio results will and dynamics of electronic states of CF2 radical. to the lowest dissociation limit are calculated at the further increase our understanding of the structures展开更多
This paper presents the formalism for absorbed dose determination to Aluminum in high-energy electron beams using Rhodotron accelerator. Depth dose curve for Aluminum at electron energy of 10 MeV was calculated. The c...This paper presents the formalism for absorbed dose determination to Aluminum in high-energy electron beams using Rhodotron accelerator. Depth dose curve for Aluminum at electron energy of 10 MeV was calculated. The calculated curve in the model as a function of the depth is compared to the experimental. The agreement of the final results remained well within the expected acceptable range. The calculated values of dose-to-Aluminum are completely fit with the measured values in the range of 0.07% for electron energy of 10 MeV.展开更多
ACPRs of leukopenia in peripheral blood of workers exposed to benzene in small-scale industries are calculated using capture-recapture methods. The results from two figures with 6-month apart demonstrate that the ACPR...ACPRs of leukopenia in peripheral blood of workers exposed to benzene in small-scale industries are calculated using capture-recapture methods. The results from two figures with 6-month apart demonstrate that the ACPR in workers exposed to benzene is 36.81(29. 14-44.48)%, significantly higher than that of control 12.71(7.20-18.22)% (P<0.05),with a relative risk of 2.9. The prevalences of 4 cross-sectional investigations in exposure group calculated with routine method are 18.73%, 26.37%, 27.93%, and 36.76% respectively;in controls, 8.38%, 6.85%, 7.94%, and 15.00% respectively and all fall in the range of 95% CI of ACPR. It is suggested that the methods of calculating ACPR by capture-recapture methods is simple, feasible and efficient, with the results more precise than with traditional methods.展开更多
On July 6,2016,China Textile Innovation Conference Shishi Forum was held in Shishi,Fujian,with the theme of'exploring innovative gene for textile products',focusing on the discussion of how to enhance the qual...On July 6,2016,China Textile Innovation Conference Shishi Forum was held in Shishi,Fujian,with the theme of'exploring innovative gene for textile products',focusing on the discussion of how to enhance the quality and efficiency of supply,how to activate and release effective demand;how to explore innovative gene for textile products from the nature of the product on the foundation of'ingenuity spirit',so as to boost reconstruction and展开更多
To evaluate the water storage and project the future evolution of glaciers, the ice-thickness of glaciers is an essential input. However, direct measurements of ice thickness are labo- rious, not feasible everywhere, ...To evaluate the water storage and project the future evolution of glaciers, the ice-thickness of glaciers is an essential input. However, direct measurements of ice thickness are labo- rious, not feasible everywhere, and necessarily restricted to a small number of glaciers. In this article, we develop a simple method to estimate the ice-thickness along flow-line of mountain glaciers. Different from the traditional method based on shallow ice approximation （SIA）, which gives a relationship be- tween ice thickness, surface slope, and yield stress of glaciers, the improved method considers and pre- sents a simple way to calibrate the influence of valley wall on ice discharge. The required inputs are the glacier surface topography and outlines. This shows the potential of the method for estimating the ice-thickness distribution and volume of glaciers without using of direct thickness measurements.展开更多
Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two...Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two-phase liquid composed of solid phase with the same diameter particles and liquid phase with the same mechanical features. Assume debris flow was one-dimension two-phase liquid moving to one direction, then general equations of velocities of solid phase and liquid phase were founded in two-phase theory. Methods to calculate average pressures, volume forces and surface forces of debris flow control volume were established. Specially, surface forces were ascertained using Bingham＇s rheology equation of liquid phase and Bagnold＇s testing results about interaction between particles of solid phase. Proportional coefficient of velocities between liquid phase and solid phase was put forward, meanwhile, divergent coefficient between theoretical velocity and real velocity of solid phase was provided too. To state succinctly before, method to calculate velocities of solid phase and liquid phase was obtained through solution to general equations. The method is suitable for both viscous debris flow and thin debris flow. Additionally, velocities every phase can be identified through analyzing deposits in-situ after occurring of debris flow. It is obvious from engineering case the result in the method is consistent to that in real-time field observation.展开更多
A few CT-based voxel phantoms were produced to investigate the sensitivity of Monte Carlo simulations of X-ray beam and electron beam to the proportions of elements and the mass densities of the materials used to expr...A few CT-based voxel phantoms were produced to investigate the sensitivity of Monte Carlo simulations of X-ray beam and electron beam to the proportions of elements and the mass densities of the materials used to express the patient’s anatomical structure. The human body can be well outlined by air, lung, adipose, muscle, soft bone and hard bone to calculate the dose distribution with Monte Carlo method. The effects of the calibration curves established by using various CT scanners are not clinically significant based on our investigation. The deviation from the values of cumulative dose volume histogram derived from CT-based voxel phantoms is less than 1% for the given target.展开更多
In Wangjiatun area of the Northern Songliao Basin, reservoir space can be divided into three types: primary pore, secondary pore and fissure according to their origins,which can be subdivided into eight subtypes: macr...In Wangjiatun area of the Northern Songliao Basin, reservoir space can be divided into three types: primary pore, secondary pore and fissure according to their origins,which can be subdivided into eight subtypes: macro-vesicule, shrank primary vesicule, alteration pore, groundmass corrosive pore, normal structural crack, corrosive structural crack, filled structural crack and groundmass shrank crack according to texture and origin of the pore space. It has characteristic of double pore medium. Volcanic porosities of small diameter samples (with diameter of ca. 2.5 cm) and large diameter samples (with diameter of ca. 21.5 cm) were tested in accordance with the characteristic of volcanic reservoir space. Volcanic porosities for small diameter samples correspond with matrix porosities and those of large diameter samples correspond with total porosities including matrix and fractured porosities. Models of the calculated porosity by acoustic wave or density of volcanic reservoir are established in view of those measured data. Comparison of calculated and measuredporosities shows that precision of calculated porosities is lower for rhyolite and tuffites, and higher for basaltand andesite. Relative errors of calculated porosities by model of large diameter samples are lower than those of small diameter samples, i. e. precision of the former is higher than that of the later.展开更多
The high accuracy ab initio calculation method of multi-reference configuration interaction（MRCI） is used to compute the low-lying eight electronic states of CuN.The potential energy curves（PECs） of the X;∑;,1;Π...The high accuracy ab initio calculation method of multi-reference configuration interaction（MRCI） is used to compute the low-lying eight electronic states of CuN.The potential energy curves（PECs） of the X;∑;,1;Π,2;∑;,1;△,1;△,1;∑;,1;Π,and;∑;in a range of R=0.1 nm-0.5 nm are obtained and they are goodly asymptotes to the Cu（;S;） + N（;S;） and Cu（;S;）+N（;D;） dissociation limits.All the possible vibrational levels,rotational constants,and spectral constants for the six bound states of X;∑;,1;Π,2;∑;,1;△,1;∑;,and 1;Π are obtained by solving the radial Schrdinger equation of nuclear motion with the Le Roy provided Level 8.0 program.Also the transition dipole moments from the ground state X;∑;to the excited states 1;Π and 2;∑;are calculated and the result indicates that the 2;∑-X;∑ transition has a much higher transition dipole moment than the 1;Π-X;∑;transition even though the l;Π state is much lower in energy than the 2;∑;state.展开更多
To more in depth understand the doping effects of oxygen on SiGe alloys, both the micro-structure and properties of O-doped SiGe （including： bulk, （001） surface, and （110） surface） are calculated by DPT ＋ U me...To more in depth understand the doping effects of oxygen on SiGe alloys, both the micro-structure and properties of O-doped SiGe （including： bulk, （001） surface, and （110） surface） are calculated by DPT ＋ U method in the present work. The calculated results are as follows. （i） The （110） surface is the main exposing surface of SiGe, in which O impurity prefers to occupy the surface vacancy sites. （ii） For O interstitial doping on SiGe （110） surface, the existences of energy states caused by 0 doping in the band gap not only enhance the infrared light absorption, but also improve the behaviors of photo-generated carriers. （iii） The finding about decreased surface work function of O-doped SiGe （110） surface can confirm previous experimental observations. （iv） In all cases, O doing mainly induces the electronic structures near the band gap to vary, but is not directly involved in these variations. Therefore, these findings in the present work not only can provide further explanation and analysis for the corresponding underlying mechanism for some of the experimental findings reported in the literature, but also conduce to the development of μc-SiGe-based solar ceils in the future.展开更多
Ringing, i.e. the emergence of an oscillatory tail behind a wave pulse as it propagates through a medium, is a pervasive artefact in FE and FDTD calculated waveforms. It is known to be a consequence of numerical dispe...Ringing, i.e. the emergence of an oscillatory tail behind a wave pulse as it propagates through a medium, is a pervasive artefact in FE and FDTD calculated waveforms. It is known to be a consequence of numerical dispersion arising from the discretization of the equations of motion. The use of an irregular mesh in a FE code has the further consequence of rendering the displacement field increasingly noisy with distance behind the wave front. In this paper these effects are illustrated using the commercial FE package ABAQUS with square and irregular triangular meshes to calculate the progress of a longitudinally polarized Ricker pulse along the axis of a cylindrically shaped aluminium specimen. We are able to give a precise analytical account of the evolution of ringing on the basis of a low order approximation for the dispersion relation of the discretized equations of motion. A qualitative account is provided of the generation of noise in the use of an irregular triangular mesh.展开更多
Aim: To explore an accurate method to calculate acetabular cup anteversion after total hip arthroplasty. Method: 1) A 3D coordinate system was established with the center of the hip joint rotation center base as coord...Aim: To explore an accurate method to calculate acetabular cup anteversion after total hip arthroplasty. Method: 1) A 3D coordinate system was established with the center of the hip joint rotation center base as coordinate center. The acetabular exit plane and Pettersson formula acetabular anteversion and Riten Pradhan formula acetabular anteversion and acetabular true anteversion were drawn;2) Determine the mathematical expression of Pettersson formula acetabular anteversion α and Riten Pradhan formula acetabular anteversion β in the coordinate system. The true acetabular anteversion is projection angle of Pettersson formula acetabular anteversion α on cross-section in the presence of acetabular abduction δ, determining mathematical expression of the acetabular anteversion θ by trigonometric functions. Results: Real acetabular cup anteversion θ = arctg (tgβ/cosδ). Conclusion: The true acetabular cup anteversion and Pettersson formula anteversion and Riten Pradhan for mula anteversion were quite different. The difference was increased with the acetabular cup abduction angle increased. The formula was simple and accurate and worthy of clinical reference.展开更多
The previous methods of figuring the numbers of chemical elements is summed up in this paper. Based on that, another two creative calculative methods are introduced as well.
Currently, accounting practices is restrained by the concept that financial accounting is based on the transaction. It excludes some important resources, like internal generated goodwill, from the accounting calculati...Currently, accounting practices is restrained by the concept that financial accounting is based on the transaction. It excludes some important resources, like internal generated goodwill, from the accounting calculation system. So it fails to fully reflect the enterprise resource and their operating effects. Based on the analysis on recent demand and supply of accounting information, this paper proposes the view that financial accounting should be based on the value. In the authors＇ opinion, both the internal generated goodwill and the purchased goodwill have the same essence. They should be brought into the accounting system. Accounting should put the enterprise resource as its object, and the area of calculation should include enterprise resource＇s origin and composition of valuation, such as liabilities, equity and the remained of the rights, profit and comprehensive income and so on. Accounting should provide the information about the value and comprehensive income of the enterprise.展开更多
基金funded by the Open Fund of No.1 Institute of Geology and Mineral Resources of Shan-dong Province(No.2022DY03)the National Natural Sci-ence Foundation of China(Nos.42074138 and 42206195)the Wenhai Program of the ST Fund of Laoshan Labo-ratory(No.LSKJ202204803).
文摘Kirchhoff integral migration imaging is widely used in industrial production due to its advantages of not being limited by observation systems,good target imaging effects,and high computational efficiency.Vertical transversely isotropic(VTI)media,as a typical anisotropic media,has always been a primary focus of anisotropic migration imaging research.We focus on the problems of low accuracy and efficiency in travel-time calculations associated with conventional Kirchhoff integral migration for VTI media.A travel-time calculation method based on physical-informed neural network(PINN)for VTI media is introduced into the process of Kirchhoff integral migration imaging.Model experiments and field data processing have shown that the travel-time calculation based on PINN can significantly improve both the accuracy and efficiency when compared to traditional finite difference algorithms,there-by enabling high-precision Kirchhoff integral migration imaging for VTI media.
基金Supported by Shandong Provincial Natural Science Foundation General Project,No.ZR2020MH248。
文摘BACKGROUND The common clinical method to evaluate blood loss during pancreaticoduoden-ectomy(PD)is visual inspection,but most scholars believe that this method is extremely subjective and inaccurate.Currently,there is no accurate,objective me-thod to evaluate the amount of blood loss in PD patients.We retrospectively analyzed the clinical data of 341 patients who underwent PD in Shandong Provincial Hospital from March 2017 to February 2019.According to different surgical methods,they were divided into an open PD(OPD)group and a laparoscopic PD(LPD)group.The differences and correlations between the in-traoperative estimation of blood loss(IEBL)obtained by visual inspection and the intraoperative calculation of blood loss(ICBL)obtained using the Hb loss method were analyzed.ICBL,IEBL and perioperative calculation of blood loss(PCBL)were compared between the two groups,and single-factor regression analysis was performed.RESULTS There was no statistically significant difference in the preoperative general patient information between the two groups(P>0.05).PD had an ICBL of 743.2(393.0,1173.1)mL and an IEBL of 100.0(50.0,300.0)mL(P<0.001).There was also a certain correlation between the two(r=0.312,P<0.001).Single-factor analysis of ICBL showed that a history of diabetes[95%confidence interval(CI):53.82-549.62;P=0.017]was an independent risk factor for ICBL.In addition,the single-factor analysis of PCBL showed that body mass index(BMI)(95%CI:0.62-76.75;P=0.046)and preoperative total bilirubin>200μmol/L(95%CI:7.09-644.26;P=0.045)were independent risk factors for PCBL.The ICBLs of the LPD group and OPD group were 767.7(435.4,1249.0)mL and 663.8(347.7,1138.2)mL,respectively(P>0.05).The IEBL of the LPD group 200.0(50.0,200.0)mL was slightly greater than that of the OPD group 100.0(50.0,300.0)mL(P>0.05).PCBL was greater in the LPD group than the OPD group[1061.6(612.3,1632.3)mL vs 806.1(375.9,1347.6)mL](P<0.05).CONCLUSION The ICBL in patients who underwent PD was greater than the IEBL,but there is a certain correlation between the two.The Hb loss method can be used to evaluate intraoperative blood loss.A history of diabetes,preoperative bilirubin>200μmol/L and high BMI increase the patient's risk of bleeding.
基金supported by the National Natural Science Foundation of China(Grant Nos.51975146,52205344)Shandong Province Natural Science Foundation(Grant No.ZR2020QE171)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)(Nos.NRF-2021R1A2C3006662,NRF-2022R1A5A1030054).
文摘An integrated calculated approach based on weakly coupled finite element(FEM)-viscoplastic selfconsistent(VPSC)model was established to simulate the texture evolution during the variable strain path extrusion process of magnesium alloys.The spiral die extrusion(SDE)process with additional circumferential shear deformation was applied to investigate the effect of path control on texture adjustment and verify the accuracy of the model.The results indicated that the additional spiral shear resulting from the overall inclined flow path effectively reduced the intensity of the{0002}//ED fiber texture by suppressing basal slip activation in the core area,while the local shear deformation along the spiral equal channel strain path led to the formation of an inclined{0002}//ND plane texture on the side.Using the modified Hall-Petch relationship,the correlation between texture and yield strength was quantified.Specifically,the weakening of the texture effectively suppressed{10-12}tensile twinning,which compensated for the deficiency of compressive yield strength without significantly sacrificing tensile yield strength,and thus improved the tension-compression asymmetry.Furthermore,the strongly inclined{0002}//ND plane texture inhibited the widespread activation of basal slip during tensile yielding,thereby enhancing the yield strength.
基金Supported by the National Natural Science Foundation of China under Grant No 61306076
文摘The calculated and experimental research of sheet resistances of crystalline silicon solar cells by dry laser doping is investigated. The nonlinear numerical model on laser melting of crystalline silicon and liquid-phase diffusion of phosphorus atoms by dry laser doping is analyzed by the finite difference method implemented in MATLAB. The melting period and melting depth of crystalline silicon as a function of laser energy density is achieved. The effective liquid-phase diffusion of phosphorus atoms in melting silicon by dry laser doping is confirmed by the rapid decrease of sheet resistances in experimental measurement. The plateau of sheet resistances is reached at around 15 Ω/. The calculated sheet resistances as a function of laser energy density is obtained and the calculated results are in good agreement with the corresponding experimental measurement. Due to the successful verification by comparison between experimental measurement and calculated results, the simulation results could be used to optimize the virtual laser doping parameters.
基金Supported by the 2014 Postdoctoral Sustentation Fund of Qingdao under Grant No 01020120517the Natural Science Foundation of Shandong Province under Grant No ZR2014AP001+1 种基金the National Natural Science Foundation of China under Grant No11447226the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents under Grant No 2015RCJJ015
文摘We investigate the geometries and energies of seven electronic states X-1A1, A1B1, a-3B1, B-1A2,b-3A2, C1B2 and c-3B2 of CF2 carbene using internally contracted multireference configuration interaction methods including Davidson correction （icMRCIq-Q） with different basis sets aug-cc-pVXZ （X=T, Q, 5）. For the first time, the potential energy curves of electronic states of CF2 related icMRCI＋Q/aug-cc-pVTZ level. The ab initio results will and dynamics of electronic states of CF2 radical. to the lowest dissociation limit are calculated at the further increase our understanding of the structures
文摘This paper presents the formalism for absorbed dose determination to Aluminum in high-energy electron beams using Rhodotron accelerator. Depth dose curve for Aluminum at electron energy of 10 MeV was calculated. The calculated curve in the model as a function of the depth is compared to the experimental. The agreement of the final results remained well within the expected acceptable range. The calculated values of dose-to-Aluminum are completely fit with the measured values in the range of 0.07% for electron energy of 10 MeV.
文摘ACPRs of leukopenia in peripheral blood of workers exposed to benzene in small-scale industries are calculated using capture-recapture methods. The results from two figures with 6-month apart demonstrate that the ACPR in workers exposed to benzene is 36.81(29. 14-44.48)%, significantly higher than that of control 12.71(7.20-18.22)% (P<0.05),with a relative risk of 2.9. The prevalences of 4 cross-sectional investigations in exposure group calculated with routine method are 18.73%, 26.37%, 27.93%, and 36.76% respectively;in controls, 8.38%, 6.85%, 7.94%, and 15.00% respectively and all fall in the range of 95% CI of ACPR. It is suggested that the methods of calculating ACPR by capture-recapture methods is simple, feasible and efficient, with the results more precise than with traditional methods.
文摘On July 6,2016,China Textile Innovation Conference Shishi Forum was held in Shishi,Fujian,with the theme of'exploring innovative gene for textile products',focusing on the discussion of how to enhance the quality and efficiency of supply,how to activate and release effective demand;how to explore innovative gene for textile products from the nature of the product on the foundation of'ingenuity spirit',so as to boost reconstruction and
基金supported by the National Basic Research Program of China (No. 2007CB411501)the Knowledge Innovation Project of the Chinese Academy of Sciences (No. KZCX2-EW-311)+1 种基金the National Natural Science Foundation of China (Nos. 91025012, J0930003/J0109)the Project for Outstanding Young Scientists of the National Natural Science Foundation of China (No. 40121101)
文摘To evaluate the water storage and project the future evolution of glaciers, the ice-thickness of glaciers is an essential input. However, direct measurements of ice thickness are labo- rious, not feasible everywhere, and necessarily restricted to a small number of glaciers. In this article, we develop a simple method to estimate the ice-thickness along flow-line of mountain glaciers. Different from the traditional method based on shallow ice approximation （SIA）, which gives a relationship be- tween ice thickness, surface slope, and yield stress of glaciers, the improved method considers and pre- sents a simple way to calibrate the influence of valley wall on ice discharge. The required inputs are the glacier surface topography and outlines. This shows the potential of the method for estimating the ice-thickness distribution and volume of glaciers without using of direct thickness measurements.
基金Project supported by the Talent Fund of the Ministry of Communication of China(No.95050508) the Fund of Western Communication of China(No.200332822047) the Key Science Fund of the Ministry of Communication of China(No.95060233)
文摘Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two-phase liquid composed of solid phase with the same diameter particles and liquid phase with the same mechanical features. Assume debris flow was one-dimension two-phase liquid moving to one direction, then general equations of velocities of solid phase and liquid phase were founded in two-phase theory. Methods to calculate average pressures, volume forces and surface forces of debris flow control volume were established. Specially, surface forces were ascertained using Bingham＇s rheology equation of liquid phase and Bagnold＇s testing results about interaction between particles of solid phase. Proportional coefficient of velocities between liquid phase and solid phase was put forward, meanwhile, divergent coefficient between theoretical velocity and real velocity of solid phase was provided too. To state succinctly before, method to calculate velocities of solid phase and liquid phase was obtained through solution to general equations. The method is suitable for both viscous debris flow and thin debris flow. Additionally, velocities every phase can be identified through analyzing deposits in-situ after occurring of debris flow. It is obvious from engineering case the result in the method is consistent to that in real-time field observation.
基金The project supported by the An Hui Natural Science Foundation (No. 01043601)
文摘A few CT-based voxel phantoms were produced to investigate the sensitivity of Monte Carlo simulations of X-ray beam and electron beam to the proportions of elements and the mass densities of the materials used to express the patient’s anatomical structure. The human body can be well outlined by air, lung, adipose, muscle, soft bone and hard bone to calculate the dose distribution with Monte Carlo method. The effects of the calibration curves established by using various CT scanners are not clinically significant based on our investigation. The deviation from the values of cumulative dose volume histogram derived from CT-based voxel phantoms is less than 1% for the given target.
文摘In Wangjiatun area of the Northern Songliao Basin, reservoir space can be divided into three types: primary pore, secondary pore and fissure according to their origins,which can be subdivided into eight subtypes: macro-vesicule, shrank primary vesicule, alteration pore, groundmass corrosive pore, normal structural crack, corrosive structural crack, filled structural crack and groundmass shrank crack according to texture and origin of the pore space. It has characteristic of double pore medium. Volcanic porosities of small diameter samples (with diameter of ca. 2.5 cm) and large diameter samples (with diameter of ca. 21.5 cm) were tested in accordance with the characteristic of volcanic reservoir space. Volcanic porosities for small diameter samples correspond with matrix porosities and those of large diameter samples correspond with total porosities including matrix and fractured porosities. Models of the calculated porosity by acoustic wave or density of volcanic reservoir are established in view of those measured data. Comparison of calculated and measuredporosities shows that precision of calculated porosities is lower for rhyolite and tuffites, and higher for basaltand andesite. Relative errors of calculated porosities by model of large diameter samples are lower than those of small diameter samples, i. e. precision of the former is higher than that of the later.
文摘The high accuracy ab initio calculation method of multi-reference configuration interaction（MRCI） is used to compute the low-lying eight electronic states of CuN.The potential energy curves（PECs） of the X;∑;,1;Π,2;∑;,1;△,1;△,1;∑;,1;Π,and;∑;in a range of R=0.1 nm-0.5 nm are obtained and they are goodly asymptotes to the Cu（;S;） + N（;S;） and Cu（;S;）+N（;D;） dissociation limits.All the possible vibrational levels,rotational constants,and spectral constants for the six bound states of X;∑;,1;Π,2;∑;,1;△,1;∑;,and 1;Π are obtained by solving the radial Schrdinger equation of nuclear motion with the Le Roy provided Level 8.0 program.Also the transition dipole moments from the ground state X;∑;to the excited states 1;Π and 2;∑;are calculated and the result indicates that the 2;∑-X;∑ transition has a much higher transition dipole moment than the 1;Π-X;∑;transition even though the l;Π state is much lower in energy than the 2;∑;state.
基金Project supported by the Natural Science Foundation of Yunnan Province,China(Grant No.2015FB123)the 18th Yunnan Province Young Academic and Technical Leaders Reserve Talent Project,China(Grant No.2015HB015)the National Natural Science Foundation of China(Grant No.U1037604)
文摘To more in depth understand the doping effects of oxygen on SiGe alloys, both the micro-structure and properties of O-doped SiGe （including： bulk, （001） surface, and （110） surface） are calculated by DPT ＋ U method in the present work. The calculated results are as follows. （i） The （110） surface is the main exposing surface of SiGe, in which O impurity prefers to occupy the surface vacancy sites. （ii） For O interstitial doping on SiGe （110） surface, the existences of energy states caused by 0 doping in the band gap not only enhance the infrared light absorption, but also improve the behaviors of photo-generated carriers. （iii） The finding about decreased surface work function of O-doped SiGe （110） surface can confirm previous experimental observations. （iv） In all cases, O doing mainly induces the electronic structures near the band gap to vary, but is not directly involved in these variations. Therefore, these findings in the present work not only can provide further explanation and analysis for the corresponding underlying mechanism for some of the experimental findings reported in the literature, but also conduce to the development of μc-SiGe-based solar ceils in the future.
文摘Ringing, i.e. the emergence of an oscillatory tail behind a wave pulse as it propagates through a medium, is a pervasive artefact in FE and FDTD calculated waveforms. It is known to be a consequence of numerical dispersion arising from the discretization of the equations of motion. The use of an irregular mesh in a FE code has the further consequence of rendering the displacement field increasingly noisy with distance behind the wave front. In this paper these effects are illustrated using the commercial FE package ABAQUS with square and irregular triangular meshes to calculate the progress of a longitudinally polarized Ricker pulse along the axis of a cylindrically shaped aluminium specimen. We are able to give a precise analytical account of the evolution of ringing on the basis of a low order approximation for the dispersion relation of the discretized equations of motion. A qualitative account is provided of the generation of noise in the use of an irregular triangular mesh.
文摘Aim: To explore an accurate method to calculate acetabular cup anteversion after total hip arthroplasty. Method: 1) A 3D coordinate system was established with the center of the hip joint rotation center base as coordinate center. The acetabular exit plane and Pettersson formula acetabular anteversion and Riten Pradhan formula acetabular anteversion and acetabular true anteversion were drawn;2) Determine the mathematical expression of Pettersson formula acetabular anteversion α and Riten Pradhan formula acetabular anteversion β in the coordinate system. The true acetabular anteversion is projection angle of Pettersson formula acetabular anteversion α on cross-section in the presence of acetabular abduction δ, determining mathematical expression of the acetabular anteversion θ by trigonometric functions. Results: Real acetabular cup anteversion θ = arctg (tgβ/cosδ). Conclusion: The true acetabular cup anteversion and Pettersson formula anteversion and Riten Pradhan for mula anteversion were quite different. The difference was increased with the acetabular cup abduction angle increased. The formula was simple and accurate and worthy of clinical reference.
基金This work is supported by the National Science Foundation of China （No. 20471001 and 20671001）, the Important Project of Anhui Provincial Education Department （No. ZD2007004-1）, the Specific Project for Talents of Science and Technology of Universities of Anhui Province （No. 2005hbz03） and the Key Laboratory of Environment-friendly Polymer Materials of Anhui Province.
文摘The previous methods of figuring the numbers of chemical elements is summed up in this paper. Based on that, another two creative calculative methods are introduced as well.
文摘Currently, accounting practices is restrained by the concept that financial accounting is based on the transaction. It excludes some important resources, like internal generated goodwill, from the accounting calculation system. So it fails to fully reflect the enterprise resource and their operating effects. Based on the analysis on recent demand and supply of accounting information, this paper proposes the view that financial accounting should be based on the value. In the authors＇ opinion, both the internal generated goodwill and the purchased goodwill have the same essence. They should be brought into the accounting system. Accounting should put the enterprise resource as its object, and the area of calculation should include enterprise resource＇s origin and composition of valuation, such as liabilities, equity and the remained of the rights, profit and comprehensive income and so on. Accounting should provide the information about the value and comprehensive income of the enterprise.
