目前在电力行业中广泛应用的SF6气体具有严重的温室效应,寻找一种绝缘性能优良的环保型替代气体成为研究热点。近年来,C3F7CN及其混合气体凭借出色的绝缘性能和环保特性得到了国内外学者的广泛关注。目前针对其放电分解机理的研究较少...目前在电力行业中广泛应用的SF6气体具有严重的温室效应,寻找一种绝缘性能优良的环保型替代气体成为研究热点。近年来,C3F7CN及其混合气体凭借出色的绝缘性能和环保特性得到了国内外学者的广泛关注。目前针对其放电分解机理的研究较少。首先,基于ReaxFF反应分子动力学方法和密度泛函理论,从微观层面模拟研究了C3F7CN/CO2混合气体的分解机理。基于构建的C3F7CN/CO2混合气体模型,研究了温度对C3F7CN分解过程的影响,分析了其可能的分解路径、产物类型及分布等。计算结果表明,C3F7CN在局部过热或放电等故障条件下分解容易产生CF3·、C3F7·、C·、CF3CFCN·、CF2·和F·等各类自由基,上述自由基复合将产生CF4、C2F6、C3F8、CF3CN、CO等产物。其次,利用气体绝缘试验平台和气相色谱质谱联用仪(gas chromatography mass spectrometer,GC-MS),试验分析了其多次击穿后的分解产物。试验结果表明,混合气体多次击穿后的主要分解产物是CF4、C2F6、CF3CN。这些产物分子均具有比较好的绝缘能力,保障了C3F7CN/CO2混合气体的绝缘性能不被破环。相关结论为进一步探究C3F7CN/CO2混合气体的绝缘特性及协同效应等课题提供理论依据和工程指导。展开更多
The effects of the Cr3C2 content and wheel speed on the amorphization behavior of the melt-spun SmCo7-x（Cr3C2）x （x=0.10-0.25） alloys were studied systematically by X-ray diffraction analysis （XRD）, differential ...The effects of the Cr3C2 content and wheel speed on the amorphization behavior of the melt-spun SmCo7-x（Cr3C2）x （x=0.10-0.25） alloys were studied systematically by X-ray diffraction analysis （XRD）, differential scanning calorimetry （DSC） and magnetic measurements. The ribbon melt-spun at lower wheel speed （20 m/s） has composite structure composed of mostly SmCo7 and a small amount of Sm2Co17R. The grain size of SmCo7 phase decreases with the increase of Cr3C2 content. With the increase of wheel speed, the XRD peaks become lower and accompanied with a broad increase in backgrounds, indicating a considerable decrease in the grain size of the SmCo7 phase. When the wheel speed increases to 40 m/s, SmCo7-x（Cr3C2）x alloys can be obtained in the amorphous state for 0.15≤x≤0.25 with intrinsic coercive Hci of 0.004-0.007 T. The DSC analysis reveals that SmCo7 phase firstly precipitates from the amorphous matrix at 650 °C, followed by the crystallization of Sm2Co17 phase at 770 °C.展开更多
文摘目前在电力行业中广泛应用的SF6气体具有严重的温室效应,寻找一种绝缘性能优良的环保型替代气体成为研究热点。近年来,C3F7CN及其混合气体凭借出色的绝缘性能和环保特性得到了国内外学者的广泛关注。目前针对其放电分解机理的研究较少。首先,基于ReaxFF反应分子动力学方法和密度泛函理论,从微观层面模拟研究了C3F7CN/CO2混合气体的分解机理。基于构建的C3F7CN/CO2混合气体模型,研究了温度对C3F7CN分解过程的影响,分析了其可能的分解路径、产物类型及分布等。计算结果表明,C3F7CN在局部过热或放电等故障条件下分解容易产生CF3·、C3F7·、C·、CF3CFCN·、CF2·和F·等各类自由基,上述自由基复合将产生CF4、C2F6、C3F8、CF3CN、CO等产物。其次,利用气体绝缘试验平台和气相色谱质谱联用仪(gas chromatography mass spectrometer,GC-MS),试验分析了其多次击穿后的分解产物。试验结果表明,混合气体多次击穿后的主要分解产物是CF4、C2F6、CF3CN。这些产物分子均具有比较好的绝缘能力,保障了C3F7CN/CO2混合气体的绝缘性能不被破环。相关结论为进一步探究C3F7CN/CO2混合气体的绝缘特性及协同效应等课题提供理论依据和工程指导。
基金Project (51104188) supported by the National Natural Science Foundation for Young Scholars of China
文摘The effects of the Cr3C2 content and wheel speed on the amorphization behavior of the melt-spun SmCo7-x（Cr3C2）x （x=0.10-0.25） alloys were studied systematically by X-ray diffraction analysis （XRD）, differential scanning calorimetry （DSC） and magnetic measurements. The ribbon melt-spun at lower wheel speed （20 m/s） has composite structure composed of mostly SmCo7 and a small amount of Sm2Co17R. The grain size of SmCo7 phase decreases with the increase of Cr3C2 content. With the increase of wheel speed, the XRD peaks become lower and accompanied with a broad increase in backgrounds, indicating a considerable decrease in the grain size of the SmCo7 phase. When the wheel speed increases to 40 m/s, SmCo7-x（Cr3C2）x alloys can be obtained in the amorphous state for 0.15≤x≤0.25 with intrinsic coercive Hci of 0.004-0.007 T. The DSC analysis reveals that SmCo7 phase firstly precipitates from the amorphous matrix at 650 °C, followed by the crystallization of Sm2Co17 phase at 770 °C.
