In underground engineering felds,such as mining engineering,rocks are often subjected to cyclic loading,resulting in the deterioration of their mechanical properties,which poses a serious threat to engineering constru...In underground engineering felds,such as mining engineering,rocks are often subjected to cyclic loading,resulting in the deterioration of their mechanical properties,which poses a serious threat to engineering construction.Thus,investigating the mechanical response of rocks under cyclic loading is meaningful.Cyclic loading experiments were conducted on sandstone samples with diferent cyclic stress amplitudes(CSAs).First,the deformation characteristics and strain energy evolution were analyzed.The internal fracture extension and fragmentation characteristics of sandstone after failure were subsequently analyzed.Finally,the failure mechanism of sandstone was investigated.The results revealed that deformation,failure mode,and particle fragmentation characteristics were afected by the CSA,with the peak strain being greatest in sandstone samples subjected to the greatest CSA.With increasing CSA,the load‒unload response ratio of sandstone under the last cyclic stage generally tends to increase.Furthermore,there was an increasing trend in the dissipated energy percentage of sandstone as the CSA increased,which was a result of the increased energy used to drive fracture extension.Moreover,the sandstone exhibited a tensile‒shear composite failure mode dominated by shear failure.Nevertheless,with increasing CSA,the shear failure surface became more obvious.In addition,the proportion of small blocks and the fragmentation fractal dimension increased as the CSA increased,which indicated a high degree of fragmentation.Additionally,a sandstone damage constitutive model was developed to describe the results.Eventually,the macro-meso failure mechanism of sandstone considering CSA effects was revealed.Under high CSA,the internal fracture extension and particle friction of sandstone increased,which is the internal cause.The mechanical parameters indicated strong deformation and high dissipated energy characteristics,which is the external manifestation.This investigation is important for preventing the occurrence of disasters in underground engineering,such as coal mining.展开更多
This paper investigates the temperature and loading rate dependencies of the critical stress intensity fac-tor(KIC)for dislocation nucleation at crack tips.We develop a new KIC formula with a generalized form by incor...This paper investigates the temperature and loading rate dependencies of the critical stress intensity fac-tor(KIC)for dislocation nucleation at crack tips.We develop a new KIC formula with a generalized form by incorporating the atomistic reaction pathway analysis into Transition State Theory(TST),which cap-tures the KIC of the first dislocation nucleation event at crack tips and its sensitivity to temperature and loading rates.We use this formula and atomistic modeling information to specifically calculate the KIC for quasi-two-dimensional crack tips located at various slant twin boundaries in nano-twinned TiAl al-loys across a wide range of temperatures and strain rates.Our findings reveal that twinning dislocation nucleation at the crack tip dominates crack propagation when twin boundaries(TBs)are tilted at 15.79°and 29.5°.Conversely,when TBs tilt at 45.29°,54.74°,and 70.53°,dislocation slip becomes the preferred mode.Additionally,at TB tilts of 29.5°and 70.53°,at higher temperatures above 800 K and typical exper-imental loading rates,both dislocation nucleation modes can be activated with nearly equal probability.This observation is particularly significant as it highlights scenarios that molecular dynamics simulations,due to their time scale limitations,cannot adequately explore.This insight underscores the importance of analyzing temperature and loading rate dependencies of the KIC to fully understand the competing mechanisms of dislocation nucleation and their impact on material behavior.展开更多
The stress minimization multi-material topology optimization(MMTO)approach has recently attracted significant attention because of its applications in aerospace and mechanical engineering.Nonetheless,the stress minimi...The stress minimization multi-material topology optimization(MMTO)approach has recently attracted significant attention because of its applications in aerospace and mechanical engineering.Nonetheless,the stress minimization MMTO approach may result in stress surpassing the material's tolerance limit,potentially culminating in failure.This research proposes a novel way for imposing stress constraints on each material to regulate their respective stress levels.The fundamental concept is that each material possesses its own interpolation function for the stress model.The maximum von Mises stress for each material can be established with the definition of an upper limit,ensuring that the materials will perform safely and effectively.This aids topological structures in resisting failure and augmenting strength.A multi-physics system including thermoelastic and self-weight loads is concurrently examined alongside stress limitations.The global stress constraint utilizes the p-norm function,and the adjoint method is used to derive sensitivity.This work employs a three-field strategy utilizing density filtering and Heaviside projection functions to mitigate the artificial stress in low density.The technique is assessed through two-dimensional(2D)and three-dimensional(3D)examples,illustrating the influence of stress limits on the compliance minimization under heat and self-weight loads.The optimized results indicate a substantial decrease in the stress levels accompanied by a minor gain in compliance,while maintaining the stress within the specified range for all materials.展开更多
Based on the split hopkinson pressure bar(SHPB)tests results,the cubic specimens have been numerically modeled in this paper to investigate the impact of key factors,such as the rise time,duration,and incident pulse s...Based on the split hopkinson pressure bar(SHPB)tests results,the cubic specimens have been numerically modeled in this paper to investigate the impact of key factors,such as the rise time,duration,and incident pulse shape,on achieving stress uniformity.After analysis,the paper provides actionable methods aimed at optimizing the conditions for stress uniformity within the cubic specimen.Finally,the lateral inertia effect of cubic specimen has been scrutinized to address the existing gap in this academic area.展开更多
When a crack is subjected to shear force, crack branching usually occurs. Theoretical study shows that the crack branching under shear loading is caused by tensile stress, but not caused by shear fracture. The co plan...When a crack is subjected to shear force, crack branching usually occurs. Theoretical study shows that the crack branching under shear loading is caused by tensile stress, but not caused by shear fracture. The co plane shear fracture could be obtained if compressive stress with given direction is applied to the specimen, subsequently, calculated shear fracture toughness, K ⅡC , is larger than K ⅠC . A prerequisite of possible occurrence of mode Ⅱ fracture was proposed. The study of shear fracture shows that the maximum circumferential stress theory considered its criterion as a parametric equation of a curve in K Ⅰ, K Ⅱ plane is incorrect; the predicted ratio K ⅡC / K ⅠC =0.866 is incorrect too. [展开更多
The analytical method based on "Hertz theory on normal contact of elastic solids" and the numerical method based on finite element method (FEM) calculating the contact stress of face-gear drive with spur inv...The analytical method based on "Hertz theory on normal contact of elastic solids" and the numerical method based on finite element method (FEM) calculating the contact stress of face-gear drive with spur involute pinion were introduced, and their relative errors are below 10%, except edge contact, which turns out that these two methods can compute contact stress of face-gear drive correctly and effectively. An agreement of the localized bearing contact stress is gotten for these two methods, making sure that the calculation results of FEM are reliable. The loaded meshing simulations of multi-tooth FEM model were developed, and the determination of the transmission error and the maximal load distribution factor of face-gear drive under torques were given. A formula for the maximal load distribution factor was proposed. By introducing the maximal load distribution factor in multi-tooth contact zone, a method for calculating the maximal contact stress in multi-tooth contact can be given. Compared to FEM, the results of these formulae are proved to be reliable, and the relative errors are below 10%.展开更多
The failure characteristics under coupled static and dynamic loading were investigated by the improved split Hopkinson pressure bar （SHPB） with axial pre-pressure and confining pressure. The results show that the st...The failure characteristics under coupled static and dynamic loading were investigated by the improved split Hopkinson pressure bar （SHPB） with axial pre-pressure and confining pressure. The results show that the stress—strain curve of the rock under static-dynamic coupled loading is a typical class I curve when the dynamic load is comparatively high; With the decrease of the dynamic load, the stress—strain curve transforms to a typical class II curve. The dynamic failure process was recorded by high-speed photography. Analyses of fracture surface morphology show that the failure modes of specimens are tensile failure or combined shear failure when the impact load energy is low, but the failure modes of specimens become tensile failure when the impact load energy is high. The results of fractal dimension show that the elastic potential energy release leads to increase in the degree of crushing of samples when the energy of impact load is low under coupled static and dynamic loads with high stress.展开更多
Load spectra research for bogie frame requires establishing the load?stress relationship on working condition, which has been omitted by the researchers. With the load?stress of the bogie frame of an intercity Electri...Load spectra research for bogie frame requires establishing the load?stress relationship on working condition, which has been omitted by the researchers. With the load?stress of the bogie frame of an intercity Electric Multiple Unit(Hereinafter referred to as EMU) as the research object, an optimization model of the load?stress transfer relationship is established. The load?stress coe cient for EMU bogie frame was calibrated in the laboratory bench and online test was arranged on Dazhou?Chengdu line. Comparison of nonlinear and linear neural networks proves that the linear transitive relation between the load and stress of the bogie frame in the operating process is highly suitable. An optimization model of the load?stress transfer coe cient is obtained. The data calculated with the modified coe cient are closer to the dynamic stress results in the actual operating process than the data calculated with the calibration coe cient. The coe cient of the modified transitive relation is una ected by operating area, empty load, heavy load, or other conditions in the operating process of the intercity EMU. The real loads in actual situations are obtained. The model of online load?stress relationship that is highly suitable for line stress calculation is finally established. The research is helpful for further damage calculation and inferring the time history signal of the load in load spectra research.展开更多
AIM: To assess the extent of micronutrient and oxidative stress in blood and to examine their linkages with viral loads in chronic hepatitis C patients.METHODS: Hepatitis C virus (HCV)-RNA levels were quantified in th...AIM: To assess the extent of micronutrient and oxidative stress in blood and to examine their linkages with viral loads in chronic hepatitis C patients.METHODS: Hepatitis C virus (HCV)-RNA levels were quantified in the serum from 37 previously untreated patients with chronic hepatitis C. The plasma and erythrocyte micronutrients (zinc, selenium, copper, and iron) were estimated, and malondialdehyde (MDA)contents were determined as a marker to detect oxidative stress. Antioxidant enzymes, superoxide dismutase (SOD),glutathione peroxidase (GPX) and glutathione reductase (GR) activities in blood were also measured. The control group contained 31 healthy volunteers.RESULTS: The contents of zinc (Zn), and selenium (Se)in plasma and erythrocytes were significantly lower in hepatitis C patients than in the controls. On the contrary,copper (Cu) levels were significantly higher. Furthermore,plasma and erythrocyte MDA levels, and the SOD and GR activities in erythrocytes significantly increased in hepatitis C patients compared to the controls. However, the plasma GPX activity in patients was markedly lower. Plasma Se (r= -0.730, P<0.05), Cu (r = 0.635), and GPX (r = -0.675)demonstrated correlations with HCV-RNA loads. Significant correlation coefficients were also observed between HCV-RNA levels and erythrocyte Zn (r = -0.403), Se (r = -0.544), Cu (r = 0.701) and MDA (r = 0.629) and GR (r = 0.441).CONCLUSION: The levels of Zn, Se, Cu, and oxidative stress (MDA), as well as related anti-oxidative enzymes (GR and GPX) in blood have important impact on the viral factors in chronic hepatitis C. The distribution of these parameters might be significant biomarkers for HCV.展开更多
The ratio of crack initiation stress to the uniaxial compressive strength(SCI,B/SUC,B) and the ratio of axial strain at the crack initiation stress to the axial strain at the uniaxial compressive strength(B,UCB,CI,A,A...The ratio of crack initiation stress to the uniaxial compressive strength(SCI,B/SUC,B) and the ratio of axial strain at the crack initiation stress to the axial strain at the uniaxial compressive strength(B,UCB,CI,A,A/SSSS) were studied by performing numerical stress analysis on blocks having multi flaws at close spacing's under uniaxial loading using PFC3 D. The following findings are obtained: SCI,B/SUC,B has an average value of about 0.5 with a variability of ± 0.1. This range agrees quite well with the values obtained by former research. For joint inclination angle, β=90°,B,UCB,CI,A,A/SSSS is found to be around 0.48 irrespective of the value of joint continuity factor, k. No particular relation is found betweenB,UCB,CI,A,A/SSSS and β; however, the average B,UCB,CI,A,A/SSSS seems to slightly decrease with increasing k. The variability ofB,UCB,CI,A,A/SSSS is found to increase with k.Based on the cases studied in this work,B,UCB,CI,A,A/SSSS ranges between 0.3 and 0.5. This range is quite close to the range of 0.4to 0.6 obtained for SCI,B/SUC,B. The highest variability of ± 0.12 forB,UCB,CI,A,A/SSSS is obtained for k=0.8. For the remaining k values the variability ofB,UCB,CI,A,A/SSSS can be expressed within ± 0.05. This finding is very similar to the finding obtained for the variability of SCI,B/SUC,B.展开更多
Different components of deep-sea submersibles,such as the pressure hull,are usually subjected to intermittent loading,dwell loading,and unloading during service.Therefore,for the design and reliability assessment of s...Different components of deep-sea submersibles,such as the pressure hull,are usually subjected to intermittent loading,dwell loading,and unloading during service.Therefore,for the design and reliability assessment of structural parts under dwell fatigue loading,understanding the effects of intermittent loading time on dwell fatigue behavior of the alloys is essential.In this study,the effects of the intermittent loading time and stress ratio on dwell fatigue behavior of the titanium alloy Ti-6 Al-4 V ELI were investigated.Results suggest that the dwell fatigue failure modes of Ti-6 Al-4 V ELI can be classified into three types,i.e.,fatigue failure mode,ductile failure mode,and mixed failure mode.The intermittent loading time does not affect the dwell fatigue behavior,whereas the stress ratio significantly affects the dwell fatigue life and dwell fatigue mechanism.The dwell fatigue life increases with an increase in the stress ratio for the same maximum stress,and specimens with a negative stress ratio tend to undergo ductile failure.The mechanism of dwell fatigue of titanium alloys is attribute to an increase in the plastic strain caused by the part of the dwell loading,thereby resulting in an increase in the actual stress of the specimens during the subsequent loading cycles and aiding the growth of the formed crack or damage,along with the local plastic strain or damage induced by the part of the fatigue load promoting the cumulative plastic strain during the dwell fatigue process.The interaction between dwell loading and fatigue loading accelerates specimen failure,in contrast to the case for individual creep or fatigue loading alone.The dwell fatigue life and cumulative maximum strain during the first loading cycle could be correlated by a linear relationship on the log–log scale.This relationship can be used to evaluate the dwell fatigue life of Ti alloys with the maximum stress dwell.展开更多
In order to study the effect of time lag and stress loading rates on rock deformation,the conventional stepped stress loading mode was changed into a continuous mode to investigate the effect of effective pressure on ...In order to study the effect of time lag and stress loading rates on rock deformation,the conventional stepped stress loading mode was changed into a continuous mode to investigate the effect of effective pressure on permeability and porosity.The time lag effect of rock deformation illustrating the relationship between changes in permeability and steady time was studied.Permeability reduction ratios were measured under different stress loading rates which were achieved by different pump rate settings.The results show that permeability and porosity gradually decrease with increases in effective pressure.Permeability at high effective pressure attains stability quickly.Steady times at low effective pressure are very long.Reduction in permeability at lower stress loading rates is small,while,in contrast,it is large at high stress loading rates.展开更多
Rocks in underground works usually experience rather complex stress disturbance.For this,their fracture mechanism is significantly different from rocks subjected to conventional triaxial compression conditions.The eff...Rocks in underground works usually experience rather complex stress disturbance.For this,their fracture mechanism is significantly different from rocks subjected to conventional triaxial compression conditions.The effects of stress disturbances on rock geomechanical behaviors under fatigue loading conditions and triaxial unloading conditions have been reported in previous studies.However,little is known about the dependence of the unloading rate on fatigue loading and confining stress unloading(FL-CSU)conditions that influence rock failure.In this paper,we aimed at investigating the fracture behaviors of marble under FL-CSU conditions using the post-test X-ray computed tomography(CT)scanning technique and the GCTS RTR 2000 rock mechanics system.Results show that damage accumulation at the fatigue stage can influence the final fracture behaviors of marble.The stored elastic energy for rock samples under FL-CSU tests is relatively larger compared to those under conventional triaxial tests,and the dissipated energy used to drive damage evolution and crack propagation is larger for FL-CSU tests.In FL-CSU tests,as the unloading rate increases,the dissipated energy grows and elastic energy reduces.CT scanning after the test reveals the impacts of the unloading rate on the crack pattern and a fracture degree index is therein defined in this context to represent the crack dimension.It shows that the crack pattern after FL-CSU tests depends on the unloading rate,and the fracture degree is in agreement with the analysis of both the energy dissipation and the amount of energy released.The effect of unloading rate on fracture evolution characteristics of marble is revealed by a series of FL-CSU tests.展开更多
According to the Mohr-Coulomb yield criterion, the stress field of the infinite slope is derived under a vertical uniform load q on the top of the slope. It is indicated that elastic and elasto-plastic states would oc...According to the Mohr-Coulomb yield criterion, the stress field of the infinite slope is derived under a vertical uniform load q on the top of the slope. It is indicated that elastic and elasto-plastic states would occur in the slope. When q is smaller than the critical load, q(p), the slope is in the elastic state. If q equals q(p), the slope is in the critical state, and the plastic deformation would occur along the critical angle. With the increase of q, the plastic zone would extend, and the slope is in the elasto-plastic State. If q equals limit load, the slope is in the limit equilibrium state. The slope may be divided into three zones. Some charts of the critical angle, the critical and limit load coefficients are presented in this paper.展开更多
In order to study the dynamic and electrical coupling response characteristics of Metal Oxide Semiconductor Controlled Thyristor(MCT)high-voltage switch under the synergic action of mechanical load and high voltage,th...In order to study the dynamic and electrical coupling response characteristics of Metal Oxide Semiconductor Controlled Thyristor(MCT)high-voltage switch under the synergic action of mechanical load and high voltage,the separated Hopkinson pressure bar(SHPB)test system was used to simulate different impact load environments,and combined with the multi-layer high-voltage ceramic capacitor charging and discharging system,the instantaneous electrical signals of MCT high-voltage switch were collected.Combined with numerical simulation and theoretical analysis,the failure mode and stress wave propagation characteristics of MCT high voltage switch were determined.The mechanical and electrical coupling response characteristics and failure mechanism of MCT high voltage switch under dynamic load were revealed from macroscopic and microscopic levels.The results show that the damage modes of MCT high-voltage switches can be divided into non-functional damage,recoverable functional damage,non-recoverable damage and structural damage.Due to the gap between the metal gate and the oxide layer,the insulating oxide layer was charged.After placing for a period of time,the elastic deformation of the metal gate partially recovered and the accumulated charge disappeared,which induced the recoverable functional damage failure of the device.In addition,obvious cracks appeared on both sides of the monocrystalline silicon inside the MCT high-voltage switch,leading to unrecoverable damage of the device.展开更多
Dual-level stress plateaus (i.e., relatively short peak stress plateaus, followed by prolonged crushing stress plateaus) in metallic hexagonal honeycombs subjected to out-of-plane impact loading are characterized usin...Dual-level stress plateaus (i.e., relatively short peak stress plateaus, followed by prolonged crushing stress plateaus) in metallic hexagonal honeycombs subjected to out-of-plane impact loading are characterized using a combined numerical and analytical study, with the influence of the strain-rate sensitivity of the honeycomb pare nt material accounted for. The predicti ons are validated against existing experimental measurements, and good agreement is achieved. It is demonstrated that honeycombs exhibit dual-level stress plateaus when bucklewaves are initiated and propagate in cell walls, followed by buckling and progressive folding of the cell walls. The abrupt stress drop from peak to crushing plateau in the compressive stress versus strain curve can be explained in a way similar to the quasi-static buckling of a clamped plate. The duration of the peak stress plateau is more evident for strain-rate insensitive honeycombs.展开更多
The mechanical properties of deep-sea sediments during the driving process of crawler collectors are essential factors in the design of mining systems.In this study,a crawler load is divided into a normal compression ...The mechanical properties of deep-sea sediments during the driving process of crawler collectors are essential factors in the design of mining systems.In this study,a crawler load is divided into a normal compression load and a horizontal shear load.Then,the internal stress state of sedimentary soil is examined through a theoretical calculation and finite element numerical simulation.Finally,the driving of crawlers is simulated by changing the relative spatial position between the load and stress unit,obtaining the stress path of the soil unit.Based on the calculation results,the effect of the horizontal shear load on the soil stress response is analyzed at different depths,and the spatial variation law of the soil stress path is examined.The results demonstrate that the horizontal shear load has a significant effect on the rotation of the principal stress,and the reverse rotation of the principal stress axis becomes obvious with the increase in the burial depth.The stress path curve of the soil is different at various depths.The spatial variation rule of the stress path of the shallow soil is complex,whereas the stress path curve of the deep soil tends to shrink as the depth increases.The stress path of the corresponding depth should be selected according to the actual research purpose and applied to the laboratory test.展开更多
Lithium-ion batteries suffer from mechano–electrochemical coupling problems that directly determine the battery life. In this paper, we investigate the electrode electrochemical performance under stress conditions, w...Lithium-ion batteries suffer from mechano–electrochemical coupling problems that directly determine the battery life. In this paper, we investigate the electrode electrochemical performance under stress conditions, where seven tensile/compressive stresses are designed and loaded on electrodes, thereby decoupling mechanics and electrochemistry through incremental stress loads. Four types of multi-group electrochemical tests under tensile/compressive stress loading and normal package loading are performed to quantitatively characterize the effects of tensile stress and compressive stress on cycle performance and the kinetic performance of a silicon composite electrode. Experiments show that a tensile stress improves the electrochemical performance of a silicon composite electrode, exhibiting increased specific capacity and capacity retention rate, reduced energy dissipation rate and impedances, enhanced reactivity, accelerated ion/electron migration and diffusion, and reduced polarization. Contrarily, a compressive stress has the opposite effect, inhibiting the electrochemical performance. The stress effect is nonlinear, and a more obvious suppression via compressive stress is observed than an enhancement via tensile stress. For example, a tensile stress of 675 k Pa increases diffusion coefficient by 32.5%, while a compressive stress reduces it by 35%. Based on the experimental results, the stress regulation mechanism is analyzed. Tensile stress loads increase the pores of the electrode material microstructure, providing more deformation spaces and ion/electron transport channels. This relieves contact compressive stress, strengthens diffusion/reaction, and reduces the degree of damage and energy dissipation. Thus, the essence of stress enhancement is that it improves and optimizes diffusion, reaction and stress in the microstructure of electrode material as well as their interactions via physical morphology.展开更多
In this paper,the influence of geometric parameters on the stress concentration factors due to three different types of axial loading on 81 TY tubular structures is studied.Our results reveal that,geometric parameters...In this paper,the influence of geometric parameters on the stress concentration factors due to three different types of axial loading on 81 TY tubular structures is studied.Our results reveal that,geometric parameters have a considerable impact on the variation of stress concentration factors on tubular TY-joints under axial loads.Thus,the highest stress concentration factor values are observed on the vertical brace than on the inclined one.The finite element results of the tubular structures were verified by parametric equations and experimental data.A parametric study was carried out by analyses using the nonlinear regression method to obtain parametric equations.These equations are used to calculate stress concentration factors and to analyse the fatigue resistance of TY-joints due to axial loads.展开更多
Resilience to psychological stress is defined as adaption to challenging life experiences and not the absence of adverse life events.Determinants of resilience include personality traits,genetic/epigenetic modificatio...Resilience to psychological stress is defined as adaption to challenging life experiences and not the absence of adverse life events.Determinants of resilience include personality traits,genetic/epigenetic modifications of genes involved in the stress response,cognitive and behavioral flexibility,secure attachment with a caregiver,social and community support systems,nutrition and exercise,and alignment of circadian rhythm to the natural light/dark cycle.Therefore,resilience is a dynamic and flexible process that continually evolves by the intersection of different domains in human’s life;biological,social,and psychological.The objective of this minireview is to summarize the existing knowledge about the multitude factors and molecular alterations that result from resilience to stress response.Given the multiple contributing factors in building resilience,we set out a goal to identify which factors were most supportive of a causal role by the current literature.We focused on resilience-related molecular alterations resulting from mind-body homeostasis in connection with psychosocial and environmental factors.We conclude that there is no one causal factor that differentiates a resilient person from a vulnerable one.Instead,building resilience requires an intricate network of positive experiences and a healthy lifestyle that contribute to a balanced mind-body connection.Therefore,a holistic approach must be adopted in future research on stress response to address the multiple elements that promote resilience and prevent illnesses and psychopathology related to stress allostatic load.展开更多
基金financially supported by the National Key R&D Program of China(Grant No.2022YFC3004704)the National Natural Science Foundation of China(Grant No.52174166)Graduate Research and Innovation Foundation of Chongqing,China(Grant No.CYB23031)。
文摘In underground engineering felds,such as mining engineering,rocks are often subjected to cyclic loading,resulting in the deterioration of their mechanical properties,which poses a serious threat to engineering construction.Thus,investigating the mechanical response of rocks under cyclic loading is meaningful.Cyclic loading experiments were conducted on sandstone samples with diferent cyclic stress amplitudes(CSAs).First,the deformation characteristics and strain energy evolution were analyzed.The internal fracture extension and fragmentation characteristics of sandstone after failure were subsequently analyzed.Finally,the failure mechanism of sandstone was investigated.The results revealed that deformation,failure mode,and particle fragmentation characteristics were afected by the CSA,with the peak strain being greatest in sandstone samples subjected to the greatest CSA.With increasing CSA,the load‒unload response ratio of sandstone under the last cyclic stage generally tends to increase.Furthermore,there was an increasing trend in the dissipated energy percentage of sandstone as the CSA increased,which was a result of the increased energy used to drive fracture extension.Moreover,the sandstone exhibited a tensile‒shear composite failure mode dominated by shear failure.Nevertheless,with increasing CSA,the shear failure surface became more obvious.In addition,the proportion of small blocks and the fragmentation fractal dimension increased as the CSA increased,which indicated a high degree of fragmentation.Additionally,a sandstone damage constitutive model was developed to describe the results.Eventually,the macro-meso failure mechanism of sandstone considering CSA effects was revealed.Under high CSA,the internal fracture extension and particle friction of sandstone increased,which is the internal cause.The mechanical parameters indicated strong deformation and high dissipated energy characteristics,which is the external manifestation.This investigation is important for preventing the occurrence of disasters in underground engineering,such as coal mining.
基金supported by the China Scholarship Council(Grant No.202007865002)the National Natural Science Foundation of China(Grant Nos.51865027,52065036,and 52065037)+2 种基金the Educational Unveiling Leadership Project of Gansu Province of China(Grant No.2021jyjbgs01)the support by JSPS KAKENHI(Grant No.JP23K20037)MEXT Programs(Grant Nos.JPMXP1122684766,JPMXP1020230325,and JPMXP1020230327).
文摘This paper investigates the temperature and loading rate dependencies of the critical stress intensity fac-tor(KIC)for dislocation nucleation at crack tips.We develop a new KIC formula with a generalized form by incorporating the atomistic reaction pathway analysis into Transition State Theory(TST),which cap-tures the KIC of the first dislocation nucleation event at crack tips and its sensitivity to temperature and loading rates.We use this formula and atomistic modeling information to specifically calculate the KIC for quasi-two-dimensional crack tips located at various slant twin boundaries in nano-twinned TiAl al-loys across a wide range of temperatures and strain rates.Our findings reveal that twinning dislocation nucleation at the crack tip dominates crack propagation when twin boundaries(TBs)are tilted at 15.79°and 29.5°.Conversely,when TBs tilt at 45.29°,54.74°,and 70.53°,dislocation slip becomes the preferred mode.Additionally,at TB tilts of 29.5°and 70.53°,at higher temperatures above 800 K and typical exper-imental loading rates,both dislocation nucleation modes can be activated with nearly equal probability.This observation is particularly significant as it highlights scenarios that molecular dynamics simulations,due to their time scale limitations,cannot adequately explore.This insight underscores the importance of analyzing temperature and loading rate dependencies of the KIC to fully understand the competing mechanisms of dislocation nucleation and their impact on material behavior.
基金Project supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.RS-2025-02303676)。
文摘The stress minimization multi-material topology optimization(MMTO)approach has recently attracted significant attention because of its applications in aerospace and mechanical engineering.Nonetheless,the stress minimization MMTO approach may result in stress surpassing the material's tolerance limit,potentially culminating in failure.This research proposes a novel way for imposing stress constraints on each material to regulate their respective stress levels.The fundamental concept is that each material possesses its own interpolation function for the stress model.The maximum von Mises stress for each material can be established with the definition of an upper limit,ensuring that the materials will perform safely and effectively.This aids topological structures in resisting failure and augmenting strength.A multi-physics system including thermoelastic and self-weight loads is concurrently examined alongside stress limitations.The global stress constraint utilizes the p-norm function,and the adjoint method is used to derive sensitivity.This work employs a three-field strategy utilizing density filtering and Heaviside projection functions to mitigate the artificial stress in low density.The technique is assessed through two-dimensional(2D)and three-dimensional(3D)examples,illustrating the influence of stress limits on the compliance minimization under heat and self-weight loads.The optimized results indicate a substantial decrease in the stress levels accompanied by a minor gain in compliance,while maintaining the stress within the specified range for all materials.
基金Funded by the National Natural Science Foundation of China(Nos.52278518 and 51938011)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.24KJB560021)。
文摘Based on the split hopkinson pressure bar(SHPB)tests results,the cubic specimens have been numerically modeled in this paper to investigate the impact of key factors,such as the rise time,duration,and incident pulse shape,on achieving stress uniformity.After analysis,the paper provides actionable methods aimed at optimizing the conditions for stress uniformity within the cubic specimen.Finally,the lateral inertia effect of cubic specimen has been scrutinized to address the existing gap in this academic area.
文摘When a crack is subjected to shear force, crack branching usually occurs. Theoretical study shows that the crack branching under shear loading is caused by tensile stress, but not caused by shear fracture. The co plane shear fracture could be obtained if compressive stress with given direction is applied to the specimen, subsequently, calculated shear fracture toughness, K ⅡC , is larger than K ⅠC . A prerequisite of possible occurrence of mode Ⅱ fracture was proposed. The study of shear fracture shows that the maximum circumferential stress theory considered its criterion as a parametric equation of a curve in K Ⅰ, K Ⅱ plane is incorrect; the predicted ratio K ⅡC / K ⅠC =0.866 is incorrect too. [
基金Project(50875263) supported by the National Natural Science Foundation of ChinaProject(2011CB706800) supported by the National Basic Research Program of ChinaProject(2010ssxt172) supported by the Natural Science Foundation of Hunan Province,China
文摘The analytical method based on "Hertz theory on normal contact of elastic solids" and the numerical method based on finite element method (FEM) calculating the contact stress of face-gear drive with spur involute pinion were introduced, and their relative errors are below 10%, except edge contact, which turns out that these two methods can compute contact stress of face-gear drive correctly and effectively. An agreement of the localized bearing contact stress is gotten for these two methods, making sure that the calculation results of FEM are reliable. The loaded meshing simulations of multi-tooth FEM model were developed, and the determination of the transmission error and the maximal load distribution factor of face-gear drive under torques were given. A formula for the maximal load distribution factor was proposed. By introducing the maximal load distribution factor in multi-tooth contact zone, a method for calculating the maximal contact stress in multi-tooth contact can be given. Compared to FEM, the results of these formulae are proved to be reliable, and the relative errors are below 10%.
基金Projects (10872218, 50934006) supported by the National Natural Science Foundation of ChinaProject (2010CB732004) supported by National Basic Research Program of ChinaProject (2011ssxt276) supported by the Central South University Innovation Fund, China
文摘The failure characteristics under coupled static and dynamic loading were investigated by the improved split Hopkinson pressure bar （SHPB） with axial pre-pressure and confining pressure. The results show that the stress—strain curve of the rock under static-dynamic coupled loading is a typical class I curve when the dynamic load is comparatively high; With the decrease of the dynamic load, the stress—strain curve transforms to a typical class II curve. The dynamic failure process was recorded by high-speed photography. Analyses of fracture surface morphology show that the failure modes of specimens are tensile failure or combined shear failure when the impact load energy is low, but the failure modes of specimens become tensile failure when the impact load energy is high. The results of fractal dimension show that the elastic potential energy release leads to increase in the degree of crushing of samples when the energy of impact load is low under coupled static and dynamic loads with high stress.
基金Supported by National Natural Science Foundation of China(Grant No.U1134201)National Key Research and Development Program of China(Grant No.2016YFB1200404-08)National Key Research and Development Program of China(Grant No.2016YFB1200505-11)
文摘Load spectra research for bogie frame requires establishing the load?stress relationship on working condition, which has been omitted by the researchers. With the load?stress of the bogie frame of an intercity Electric Multiple Unit(Hereinafter referred to as EMU) as the research object, an optimization model of the load?stress transfer relationship is established. The load?stress coe cient for EMU bogie frame was calibrated in the laboratory bench and online test was arranged on Dazhou?Chengdu line. Comparison of nonlinear and linear neural networks proves that the linear transitive relation between the load and stress of the bogie frame in the operating process is highly suitable. An optimization model of the load?stress transfer coe cient is obtained. The data calculated with the modified coe cient are closer to the dynamic stress results in the actual operating process than the data calculated with the calibration coe cient. The coe cient of the modified transitive relation is una ected by operating area, empty load, heavy load, or other conditions in the operating process of the intercity EMU. The real loads in actual situations are obtained. The model of online load?stress relationship that is highly suitable for line stress calculation is finally established. The research is helpful for further damage calculation and inferring the time history signal of the load in load spectra research.
基金Supported by the Kuang-Tien General Hospital, Taichung, Taiwan,China
文摘AIM: To assess the extent of micronutrient and oxidative stress in blood and to examine their linkages with viral loads in chronic hepatitis C patients.METHODS: Hepatitis C virus (HCV)-RNA levels were quantified in the serum from 37 previously untreated patients with chronic hepatitis C. The plasma and erythrocyte micronutrients (zinc, selenium, copper, and iron) were estimated, and malondialdehyde (MDA)contents were determined as a marker to detect oxidative stress. Antioxidant enzymes, superoxide dismutase (SOD),glutathione peroxidase (GPX) and glutathione reductase (GR) activities in blood were also measured. The control group contained 31 healthy volunteers.RESULTS: The contents of zinc (Zn), and selenium (Se)in plasma and erythrocytes were significantly lower in hepatitis C patients than in the controls. On the contrary,copper (Cu) levels were significantly higher. Furthermore,plasma and erythrocyte MDA levels, and the SOD and GR activities in erythrocytes significantly increased in hepatitis C patients compared to the controls. However, the plasma GPX activity in patients was markedly lower. Plasma Se (r= -0.730, P<0.05), Cu (r = 0.635), and GPX (r = -0.675)demonstrated correlations with HCV-RNA loads. Significant correlation coefficients were also observed between HCV-RNA levels and erythrocyte Zn (r = -0.403), Se (r = -0.544), Cu (r = 0.701) and MDA (r = 0.629) and GR (r = 0.441).CONCLUSION: The levels of Zn, Se, Cu, and oxidative stress (MDA), as well as related anti-oxidative enzymes (GR and GPX) in blood have important impact on the viral factors in chronic hepatitis C. The distribution of these parameters might be significant biomarkers for HCV.
基金Project(11102224)supported by the National Natural Science Foundation of ChinaProject(201206370124)supported by the China Scholarship Council,China
文摘The ratio of crack initiation stress to the uniaxial compressive strength(SCI,B/SUC,B) and the ratio of axial strain at the crack initiation stress to the axial strain at the uniaxial compressive strength(B,UCB,CI,A,A/SSSS) were studied by performing numerical stress analysis on blocks having multi flaws at close spacing's under uniaxial loading using PFC3 D. The following findings are obtained: SCI,B/SUC,B has an average value of about 0.5 with a variability of ± 0.1. This range agrees quite well with the values obtained by former research. For joint inclination angle, β=90°,B,UCB,CI,A,A/SSSS is found to be around 0.48 irrespective of the value of joint continuity factor, k. No particular relation is found betweenB,UCB,CI,A,A/SSSS and β; however, the average B,UCB,CI,A,A/SSSS seems to slightly decrease with increasing k. The variability ofB,UCB,CI,A,A/SSSS is found to increase with k.Based on the cases studied in this work,B,UCB,CI,A,A/SSSS ranges between 0.3 and 0.5. This range is quite close to the range of 0.4to 0.6 obtained for SCI,B/SUC,B. The highest variability of ± 0.12 forB,UCB,CI,A,A/SSSS is obtained for k=0.8. For the remaining k values the variability ofB,UCB,CI,A,A/SSSS can be expressed within ± 0.05. This finding is very similar to the finding obtained for the variability of SCI,B/SUC,B.
基金the National Key Research and Development Program of China(No.2017YFC0305500)。
文摘Different components of deep-sea submersibles,such as the pressure hull,are usually subjected to intermittent loading,dwell loading,and unloading during service.Therefore,for the design and reliability assessment of structural parts under dwell fatigue loading,understanding the effects of intermittent loading time on dwell fatigue behavior of the alloys is essential.In this study,the effects of the intermittent loading time and stress ratio on dwell fatigue behavior of the titanium alloy Ti-6 Al-4 V ELI were investigated.Results suggest that the dwell fatigue failure modes of Ti-6 Al-4 V ELI can be classified into three types,i.e.,fatigue failure mode,ductile failure mode,and mixed failure mode.The intermittent loading time does not affect the dwell fatigue behavior,whereas the stress ratio significantly affects the dwell fatigue life and dwell fatigue mechanism.The dwell fatigue life increases with an increase in the stress ratio for the same maximum stress,and specimens with a negative stress ratio tend to undergo ductile failure.The mechanism of dwell fatigue of titanium alloys is attribute to an increase in the plastic strain caused by the part of the dwell loading,thereby resulting in an increase in the actual stress of the specimens during the subsequent loading cycles and aiding the growth of the formed crack or damage,along with the local plastic strain or damage induced by the part of the fatigue load promoting the cumulative plastic strain during the dwell fatigue process.The interaction between dwell loading and fatigue loading accelerates specimen failure,in contrast to the case for individual creep or fatigue loading alone.The dwell fatigue life and cumulative maximum strain during the first loading cycle could be correlated by a linear relationship on the log–log scale.This relationship can be used to evaluate the dwell fatigue life of Ti alloys with the maximum stress dwell.
基金Projects 2008ZX05009-004 supported by the National Key Sci-Tech Major Special Item2006CB705805 by the National Basic Research Program of Chinasupported by the National Basic Research Program of China and "enhanced oil recovery basic theory for low permeability reservoirs" under grant 2002CCA00700
文摘In order to study the effect of time lag and stress loading rates on rock deformation,the conventional stepped stress loading mode was changed into a continuous mode to investigate the effect of effective pressure on permeability and porosity.The time lag effect of rock deformation illustrating the relationship between changes in permeability and steady time was studied.Permeability reduction ratios were measured under different stress loading rates which were achieved by different pump rate settings.The results show that permeability and porosity gradually decrease with increases in effective pressure.Permeability at high effective pressure attains stability quickly.Steady times at low effective pressure are very long.Reduction in permeability at lower stress loading rates is small,while,in contrast,it is large at high stress loading rates.
基金The authors would like to thank the editors and the anonymous reviewers for their helpful and constructive comments.This study was supported by National Key Technologies Research&Development Program(Grant No.2018YFC0808402)State Key Laboratory for GeoMechanics and Deep Underground Engineering,China University of Mining and Technology(Grant No.SKLGDUEK1824)the Fundamental Research Funds for the Central Universities(Grant No.FRF-TP-20-004A2).
文摘Rocks in underground works usually experience rather complex stress disturbance.For this,their fracture mechanism is significantly different from rocks subjected to conventional triaxial compression conditions.The effects of stress disturbances on rock geomechanical behaviors under fatigue loading conditions and triaxial unloading conditions have been reported in previous studies.However,little is known about the dependence of the unloading rate on fatigue loading and confining stress unloading(FL-CSU)conditions that influence rock failure.In this paper,we aimed at investigating the fracture behaviors of marble under FL-CSU conditions using the post-test X-ray computed tomography(CT)scanning technique and the GCTS RTR 2000 rock mechanics system.Results show that damage accumulation at the fatigue stage can influence the final fracture behaviors of marble.The stored elastic energy for rock samples under FL-CSU tests is relatively larger compared to those under conventional triaxial tests,and the dissipated energy used to drive damage evolution and crack propagation is larger for FL-CSU tests.In FL-CSU tests,as the unloading rate increases,the dissipated energy grows and elastic energy reduces.CT scanning after the test reveals the impacts of the unloading rate on the crack pattern and a fracture degree index is therein defined in this context to represent the crack dimension.It shows that the crack pattern after FL-CSU tests depends on the unloading rate,and the fracture degree is in agreement with the analysis of both the energy dissipation and the amount of energy released.The effect of unloading rate on fracture evolution characteristics of marble is revealed by a series of FL-CSU tests.
文摘According to the Mohr-Coulomb yield criterion, the stress field of the infinite slope is derived under a vertical uniform load q on the top of the slope. It is indicated that elastic and elasto-plastic states would occur in the slope. When q is smaller than the critical load, q(p), the slope is in the elastic state. If q equals q(p), the slope is in the critical state, and the plastic deformation would occur along the critical angle. With the increase of q, the plastic zone would extend, and the slope is in the elasto-plastic State. If q equals limit load, the slope is in the limit equilibrium state. The slope may be divided into three zones. Some charts of the critical angle, the critical and limit load coefficients are presented in this paper.
基金Youth Talent Project of Basic Scientific Research Project of Liaoning Province Education Department(Grant No.LJKZ0270)Youth Project of Basic Scientific Research Project of Liaoning Province Education Department(Grant No.LJKQZ2021055).
文摘In order to study the dynamic and electrical coupling response characteristics of Metal Oxide Semiconductor Controlled Thyristor(MCT)high-voltage switch under the synergic action of mechanical load and high voltage,the separated Hopkinson pressure bar(SHPB)test system was used to simulate different impact load environments,and combined with the multi-layer high-voltage ceramic capacitor charging and discharging system,the instantaneous electrical signals of MCT high-voltage switch were collected.Combined with numerical simulation and theoretical analysis,the failure mode and stress wave propagation characteristics of MCT high voltage switch were determined.The mechanical and electrical coupling response characteristics and failure mechanism of MCT high voltage switch under dynamic load were revealed from macroscopic and microscopic levels.The results show that the damage modes of MCT high-voltage switches can be divided into non-functional damage,recoverable functional damage,non-recoverable damage and structural damage.Due to the gap between the metal gate and the oxide layer,the insulating oxide layer was charged.After placing for a period of time,the elastic deformation of the metal gate partially recovered and the accumulated charge disappeared,which induced the recoverable functional damage failure of the device.In addition,obvious cracks appeared on both sides of the monocrystalline silicon inside the MCT high-voltage switch,leading to unrecoverable damage of the device.
基金the National NaturalScience Foundation of China (Grants 11472209 and 11472208)the China Postdoctoral Science Foundation (Grant 2016M600782)+4 种基金thePostdoctoral Scientific Research Project of Shaanxi Province (Grant2016BSHYDZZ18)the Zhejiang Provincial Natural Science Foundationof China (Grant LGG18A020001)the Fundamental ResearchFunds for Xi'an Jiaotong University (Grant xjj2015102)the JiangsuProvince Key Laboratory of High-end Structural Materials (Granthsm1305)and the Natural Science Basic Research Plan in ShaanxiProvince of China (Grant 2018JQ1078).
文摘Dual-level stress plateaus (i.e., relatively short peak stress plateaus, followed by prolonged crushing stress plateaus) in metallic hexagonal honeycombs subjected to out-of-plane impact loading are characterized using a combined numerical and analytical study, with the influence of the strain-rate sensitivity of the honeycomb pare nt material accounted for. The predicti ons are validated against existing experimental measurements, and good agreement is achieved. It is demonstrated that honeycombs exhibit dual-level stress plateaus when bucklewaves are initiated and propagate in cell walls, followed by buckling and progressive folding of the cell walls. The abrupt stress drop from peak to crushing plateau in the compressive stress versus strain curve can be explained in a way similar to the quasi-static buckling of a clamped plate. The duration of the peak stress plateau is more evident for strain-rate insensitive honeycombs.
基金supported by the National Natural Science Foundation of China(Nos.U1906234,51822904,51579082)the Fundamental Research Funds for the Central Universities(No.2020MS027).
文摘The mechanical properties of deep-sea sediments during the driving process of crawler collectors are essential factors in the design of mining systems.In this study,a crawler load is divided into a normal compression load and a horizontal shear load.Then,the internal stress state of sedimentary soil is examined through a theoretical calculation and finite element numerical simulation.Finally,the driving of crawlers is simulated by changing the relative spatial position between the load and stress unit,obtaining the stress path of the soil unit.Based on the calculation results,the effect of the horizontal shear load on the soil stress response is analyzed at different depths,and the spatial variation law of the soil stress path is examined.The results demonstrate that the horizontal shear load has a significant effect on the rotation of the principal stress,and the reverse rotation of the principal stress axis becomes obvious with the increase in the burial depth.The stress path curve of the soil is different at various depths.The spatial variation rule of the stress path of the shallow soil is complex,whereas the stress path curve of the deep soil tends to shrink as the depth increases.The stress path of the corresponding depth should be selected according to the actual research purpose and applied to the laboratory test.
基金Project supported by the Major Program of the National Natural Science Foundation of China(Grant No.11890680)the National Natural Science Foundation of China(Grant No.12022205)。
文摘Lithium-ion batteries suffer from mechano–electrochemical coupling problems that directly determine the battery life. In this paper, we investigate the electrode electrochemical performance under stress conditions, where seven tensile/compressive stresses are designed and loaded on electrodes, thereby decoupling mechanics and electrochemistry through incremental stress loads. Four types of multi-group electrochemical tests under tensile/compressive stress loading and normal package loading are performed to quantitatively characterize the effects of tensile stress and compressive stress on cycle performance and the kinetic performance of a silicon composite electrode. Experiments show that a tensile stress improves the electrochemical performance of a silicon composite electrode, exhibiting increased specific capacity and capacity retention rate, reduced energy dissipation rate and impedances, enhanced reactivity, accelerated ion/electron migration and diffusion, and reduced polarization. Contrarily, a compressive stress has the opposite effect, inhibiting the electrochemical performance. The stress effect is nonlinear, and a more obvious suppression via compressive stress is observed than an enhancement via tensile stress. For example, a tensile stress of 675 k Pa increases diffusion coefficient by 32.5%, while a compressive stress reduces it by 35%. Based on the experimental results, the stress regulation mechanism is analyzed. Tensile stress loads increase the pores of the electrode material microstructure, providing more deformation spaces and ion/electron transport channels. This relieves contact compressive stress, strengthens diffusion/reaction, and reduces the degree of damage and energy dissipation. Thus, the essence of stress enhancement is that it improves and optimizes diffusion, reaction and stress in the microstructure of electrode material as well as their interactions via physical morphology.
文摘In this paper,the influence of geometric parameters on the stress concentration factors due to three different types of axial loading on 81 TY tubular structures is studied.Our results reveal that,geometric parameters have a considerable impact on the variation of stress concentration factors on tubular TY-joints under axial loads.Thus,the highest stress concentration factor values are observed on the vertical brace than on the inclined one.The finite element results of the tubular structures were verified by parametric equations and experimental data.A parametric study was carried out by analyses using the nonlinear regression method to obtain parametric equations.These equations are used to calculate stress concentration factors and to analyse the fatigue resistance of TY-joints due to axial loads.
文摘Resilience to psychological stress is defined as adaption to challenging life experiences and not the absence of adverse life events.Determinants of resilience include personality traits,genetic/epigenetic modifications of genes involved in the stress response,cognitive and behavioral flexibility,secure attachment with a caregiver,social and community support systems,nutrition and exercise,and alignment of circadian rhythm to the natural light/dark cycle.Therefore,resilience is a dynamic and flexible process that continually evolves by the intersection of different domains in human’s life;biological,social,and psychological.The objective of this minireview is to summarize the existing knowledge about the multitude factors and molecular alterations that result from resilience to stress response.Given the multiple contributing factors in building resilience,we set out a goal to identify which factors were most supportive of a causal role by the current literature.We focused on resilience-related molecular alterations resulting from mind-body homeostasis in connection with psychosocial and environmental factors.We conclude that there is no one causal factor that differentiates a resilient person from a vulnerable one.Instead,building resilience requires an intricate network of positive experiences and a healthy lifestyle that contribute to a balanced mind-body connection.Therefore,a holistic approach must be adopted in future research on stress response to address the multiple elements that promote resilience and prevent illnesses and psychopathology related to stress allostatic load.
