The Sargent dividing wall column can implement four products separation sequences in one column based on Fully Thermally Coupled Distillation Column. The initial design parameters are required for the design optimizat...The Sargent dividing wall column can implement four products separation sequences in one column based on Fully Thermally Coupled Distillation Column. The initial design parameters are required for the design optimization or dynamic control of the Sargent dividing wall column, and in order to make the rigorous simulation of the Sargent dividing wall column more conducive to convergence, a ten column model for complex Sargent column is established in this paper,and the shortcut design method of this model is proposed. The internal minimum vapor and liquid flow are obtained by the Underwood equations and the mass balance method and the V-min method. The separation for a 4-component shortcut mixture of pentane, hexane, heptane and octane was considered, while the initial values of design parameters and the ratio of vapor-liquid distribution of each column were calculated by using the shortcut design method of a ten column model. And by comparing the shortcut calculations with rigorous simulation results, the practicality and reliability of shortcut calculations were verified. The reason for energy saving was analyzed based on back-mixing. A virtual heat exchanger is proposed to make the Sargent dividing wall column more energy efficient.展开更多
This paper deals with a multi-objective parameter optimization framework for energy saving in injection molding process.It combines an experimental design by Taguchi's method,a process analysis by analysis of vari...This paper deals with a multi-objective parameter optimization framework for energy saving in injection molding process.It combines an experimental design by Taguchi's method,a process analysis by analysis of variance(ANOVA),a process modeling algorithm by artificial neural network(ANN),and a multi-objective parameter optimization algorithm by genetic algorithm(GA)-based lexicographic method.Local and global Pareto analyses show the trade-off between product quality and energy consumption.The implementation of the proposed framework can reduce the energy consumption significantly in laboratory scale tests,and at the same time,the product quality can meet the pre-determined requirements.展开更多
In the adjoint-state method, the forward-propagated source wavefield and the backward-propagated receiver wavefield must be available simultaneously either for seismic imaging in migration or for gradient calculation ...In the adjoint-state method, the forward-propagated source wavefield and the backward-propagated receiver wavefield must be available simultaneously either for seismic imaging in migration or for gradient calculation in inversion. A feasible way to avoid the excessive storage demand is to reconstruct the source wavefield backward in time by storing the entire history of the wavefield in perfectly matched layers. In this paper, we make full use of the elementwise global property of the Laplace operator of the spectral element method (SEM) and propose an efficient source wavefield reconstruction method at the cost of storing the wavefield history only at single boundary layer nodes. Numerical experiments indicate that the accuracy of the proposed method is identical to that of the conventional method and is independent of the order of the Lagrange polynomials, the element type, and the temporal discretization method. In contrast, the memory-saving ratios of the conventional method versus our method is at least N when using either quadrilateral or hexahedron elements, respectively, where N is the order of the Lagrange polynomials used in the SEM. A higher memorysaving ratio is achieved with triangular elements versus quadrilaterals. The new method is applied to reverse time migration by considering the Marmousi model as a benchmark. Numerical results demonstrate that the method is able to provide the same result as the conventional method but with about 1/25 times lower storage demand. With the proposed wavefield reconstruction method, the storage demand is dramatically reduced;therefore, in-core memory storage is feasible even for large-scale three-dimensional adjoint inversion problems.展开更多
Information collection from remote location is very important for several tasks such as temperate monitoring, air quality investigation, and wartime surveillance. Wireless sensor network is the first choice to complet...Information collection from remote location is very important for several tasks such as temperate monitoring, air quality investigation, and wartime surveillance. Wireless sensor network is the first choice to complete these types of tasks. Basically, information prediction scheme is an important feature in any sensor nodes. The efficiency of the sensor network can be improved to large extent with a suitable information prediction scheme. Previously, there were several efforts to resolve this problem, but their accuracy is decreased as the prediction threshold reduces to a small value. Our proposed Adams-Bashforth-Moulton algorithm to overcome this drawback was compared with the Milne Simpson scheme. The proposed algorithm is simulated on distributed sensor nodes where information is gathered from the Intel Berkeley Research Laboratory. To maximize the power saving in wireless sensor network, our adopted method achieves the accuracy of 60.28 and 59.2238 for prediction threshold of 0.01 for Milne Simpson and Adams-Bashforth-Moulton algorithms, respectively.展开更多
To solve vehicle routing problem with different fleets, two methodologies are developed. The first methodology adopts twophase strategy. In the first phase, the improved savings method is used to assign customers to a...To solve vehicle routing problem with different fleets, two methodologies are developed. The first methodology adopts twophase strategy. In the first phase, the improved savings method is used to assign customers to appropriate vehicles. In the second phase, the iterated dynasearch algorithm is adopted to route each selected vehicle with the assigned customers. The iterated dynasearch algorithm combines dynasearch algorithm with iterated local search algorithm based on random kicks. The second methodplogy adopts the idea of cyclic transfer which is performed by using dynamic programming algorithm, and the iterated dynasearch algorithm is also embedded in it. The test results show that both methodologies generate better solutions than the traditional method, and the second methodology is superior to the first one.展开更多
This paper first described the current status of wheat nitrogen fertilizers utilization rate. Then,from balanced fertilizer application,applying slow/controlled release fertilizer,deep application of nitrogen fertiliz...This paper first described the current status of wheat nitrogen fertilizers utilization rate. Then,from balanced fertilizer application,applying slow/controlled release fertilizer,deep application of nitrogen fertilizers and graded application,controlled application amount,selection of application time according to soil properties,diagnosed application of fertilizer with instrument,addition of synergist,and precise fertilizer application,it summarized biological nitrogen saving methods and introduced prospects of future biological nitrogen saving technology.展开更多
An energy consumption analysis based on the heating characteristic of a building with central heat exchanger in a university of Tianjin was done,and the feasibility of intermittent heating with variable speed pumps wa...An energy consumption analysis based on the heating characteristic of a building with central heat exchanger in a university of Tianjin was done,and the feasibility of intermittent heating with variable speed pumps was discussed. By comparing various methods of energy consumption analysis,a modified Bin method based on the weather data in Tianjin was adopted. The heat consumption of the buildings under intermittent heating mode was calculated and compared with continuous heating mode,the result shows that intermittent heating can reduce energy consumption for 1 941 759 kW·h,save standard coal for 341 t,and reduce pump power consumption for 72 679 kW·h annually. Intermittent operation by means of varying the pump frequency not only leads to savings in fuel consumption and reduction in pollutant emissions,but also reduces operating costs significantly and it is an ideal energy-saving method. By analyzing the results,the recommendations of heating operation regulation and the transformation of pipe network were proposed separately to different kinds of buildings in colleges,such as laboratory building,teaching building.展开更多
为了准确评估温拌再生融合技术的环境效益,基于生命周期法确定路面建设期间环境效益的边界范围,建立碳排放计算模型。通过现场调查及数据分析,运用模型分别计算温拌再生技术与热拌技术的能耗及温室气体排放。最终对比分析了温拌再生融...为了准确评估温拌再生融合技术的环境效益,基于生命周期法确定路面建设期间环境效益的边界范围,建立碳排放计算模型。通过现场调查及数据分析,运用模型分别计算温拌再生技术与热拌技术的能耗及温室气体排放。最终对比分析了温拌再生融合技术的节能减排效益。结果表明:温拌再生路面施工过程中,原材料生产能耗324.47 MJ,温室气体排放为19.65 kg CO_(2e),混合料拌和能耗为217.28 MJ,温室气体排放为18.15 kg CO_(2e)。与热拌技术相比,温拌再生融合技术在混合料拌和阶段能耗和温室气体排放都有减少,RAP掺量为40%时,温拌再生路面建设期能耗节约33.33%,CO_(2)排放降低20.11%。展开更多
基金supported by the High-level Talents Program of Hebei Province (A 2017002032)
文摘The Sargent dividing wall column can implement four products separation sequences in one column based on Fully Thermally Coupled Distillation Column. The initial design parameters are required for the design optimization or dynamic control of the Sargent dividing wall column, and in order to make the rigorous simulation of the Sargent dividing wall column more conducive to convergence, a ten column model for complex Sargent column is established in this paper,and the shortcut design method of this model is proposed. The internal minimum vapor and liquid flow are obtained by the Underwood equations and the mass balance method and the V-min method. The separation for a 4-component shortcut mixture of pentane, hexane, heptane and octane was considered, while the initial values of design parameters and the ratio of vapor-liquid distribution of each column were calculated by using the shortcut design method of a ten column model. And by comparing the shortcut calculations with rigorous simulation results, the practicality and reliability of shortcut calculations were verified. The reason for energy saving was analyzed based on back-mixing. A virtual heat exchanger is proposed to make the Sargent dividing wall column more energy efficient.
基金(Nos. 20806040,61073059 and 61034005) supported by the National Natural Science Foundation of China
文摘This paper deals with a multi-objective parameter optimization framework for energy saving in injection molding process.It combines an experimental design by Taguchi's method,a process analysis by analysis of variance(ANOVA),a process modeling algorithm by artificial neural network(ANN),and a multi-objective parameter optimization algorithm by genetic algorithm(GA)-based lexicographic method.Local and global Pareto analyses show the trade-off between product quality and energy consumption.The implementation of the proposed framework can reduce the energy consumption significantly in laboratory scale tests,and at the same time,the product quality can meet the pre-determined requirements.
基金financial support for this work contributed by the National Key Research and Development Program of China (grant numbers 2016YFC0600101 and 2016YFC 0600201)the National Natural Science Foundation of China (grant numbers 41874065, 41604076, 41674102, 41674095, 41522401, 41574082, and 41774097)
文摘In the adjoint-state method, the forward-propagated source wavefield and the backward-propagated receiver wavefield must be available simultaneously either for seismic imaging in migration or for gradient calculation in inversion. A feasible way to avoid the excessive storage demand is to reconstruct the source wavefield backward in time by storing the entire history of the wavefield in perfectly matched layers. In this paper, we make full use of the elementwise global property of the Laplace operator of the spectral element method (SEM) and propose an efficient source wavefield reconstruction method at the cost of storing the wavefield history only at single boundary layer nodes. Numerical experiments indicate that the accuracy of the proposed method is identical to that of the conventional method and is independent of the order of the Lagrange polynomials, the element type, and the temporal discretization method. In contrast, the memory-saving ratios of the conventional method versus our method is at least N when using either quadrilateral or hexahedron elements, respectively, where N is the order of the Lagrange polynomials used in the SEM. A higher memorysaving ratio is achieved with triangular elements versus quadrilaterals. The new method is applied to reverse time migration by considering the Marmousi model as a benchmark. Numerical results demonstrate that the method is able to provide the same result as the conventional method but with about 1/25 times lower storage demand. With the proposed wavefield reconstruction method, the storage demand is dramatically reduced;therefore, in-core memory storage is feasible even for large-scale three-dimensional adjoint inversion problems.
文摘Information collection from remote location is very important for several tasks such as temperate monitoring, air quality investigation, and wartime surveillance. Wireless sensor network is the first choice to complete these types of tasks. Basically, information prediction scheme is an important feature in any sensor nodes. The efficiency of the sensor network can be improved to large extent with a suitable information prediction scheme. Previously, there were several efforts to resolve this problem, but their accuracy is decreased as the prediction threshold reduces to a small value. Our proposed Adams-Bashforth-Moulton algorithm to overcome this drawback was compared with the Milne Simpson scheme. The proposed algorithm is simulated on distributed sensor nodes where information is gathered from the Intel Berkeley Research Laboratory. To maximize the power saving in wireless sensor network, our adopted method achieves the accuracy of 60.28 and 59.2238 for prediction threshold of 0.01 for Milne Simpson and Adams-Bashforth-Moulton algorithms, respectively.
基金The National Natural Science Founda-tion of China ( No.70471039)the National Social Science Foundation of China (No.07BJY038)the Program for New Century Excellent Talents in University (No.NCET-04-0886)
文摘To solve vehicle routing problem with different fleets, two methodologies are developed. The first methodology adopts twophase strategy. In the first phase, the improved savings method is used to assign customers to appropriate vehicles. In the second phase, the iterated dynasearch algorithm is adopted to route each selected vehicle with the assigned customers. The iterated dynasearch algorithm combines dynasearch algorithm with iterated local search algorithm based on random kicks. The second methodplogy adopts the idea of cyclic transfer which is performed by using dynamic programming algorithm, and the iterated dynasearch algorithm is also embedded in it. The test results show that both methodologies generate better solutions than the traditional method, and the second methodology is superior to the first one.
文摘This paper first described the current status of wheat nitrogen fertilizers utilization rate. Then,from balanced fertilizer application,applying slow/controlled release fertilizer,deep application of nitrogen fertilizers and graded application,controlled application amount,selection of application time according to soil properties,diagnosed application of fertilizer with instrument,addition of synergist,and precise fertilizer application,it summarized biological nitrogen saving methods and introduced prospects of future biological nitrogen saving technology.
文摘An energy consumption analysis based on the heating characteristic of a building with central heat exchanger in a university of Tianjin was done,and the feasibility of intermittent heating with variable speed pumps was discussed. By comparing various methods of energy consumption analysis,a modified Bin method based on the weather data in Tianjin was adopted. The heat consumption of the buildings under intermittent heating mode was calculated and compared with continuous heating mode,the result shows that intermittent heating can reduce energy consumption for 1 941 759 kW·h,save standard coal for 341 t,and reduce pump power consumption for 72 679 kW·h annually. Intermittent operation by means of varying the pump frequency not only leads to savings in fuel consumption and reduction in pollutant emissions,but also reduces operating costs significantly and it is an ideal energy-saving method. By analyzing the results,the recommendations of heating operation regulation and the transformation of pipe network were proposed separately to different kinds of buildings in colleges,such as laboratory building,teaching building.
文摘为了准确评估温拌再生融合技术的环境效益,基于生命周期法确定路面建设期间环境效益的边界范围,建立碳排放计算模型。通过现场调查及数据分析,运用模型分别计算温拌再生技术与热拌技术的能耗及温室气体排放。最终对比分析了温拌再生融合技术的节能减排效益。结果表明:温拌再生路面施工过程中,原材料生产能耗324.47 MJ,温室气体排放为19.65 kg CO_(2e),混合料拌和能耗为217.28 MJ,温室气体排放为18.15 kg CO_(2e)。与热拌技术相比,温拌再生融合技术在混合料拌和阶段能耗和温室气体排放都有减少,RAP掺量为40%时,温拌再生路面建设期能耗节约33.33%,CO_(2)排放降低20.11%。
