A new method for preparation of TaC coating on C/C composite material is reported. The amorphous ethylate tantalum jellied as the precursor is prepared and spread densely on the surface of the C/C composite material s...A new method for preparation of TaC coating on C/C composite material is reported. The amorphous ethylate tantalum jellied as the precursor is prepared and spread densely on the surface of the C/C composite material so as to form a multilayer film. In a graphitization furnace the multilayer film is transformed into TaC coating at various temperatures. Ethylate tantalum film is characterized by FT-IR (Fourier transform infrared) spectra, XRD (X-ray diffraction) and SEM (scanning electron microscopy) and TaC coating is characterized by XRD and SEM. At 1200℃ the coating contained TaC and Ta2O5, and at above 1400℃ only TaC is formed. The coating formed at 1600℃ is a continuous stratum structure, and that formed at 1600℃ is a porous net structure. Analysis on thermodynamics and formation mechanism of TaC indicates that, after ethylate tantalum is decomposed, Ta2O5 is first produced and then transformed into Ta2C, and newly formed Ta2C is transformed into TaC by the sufficient C at last.展开更多
Metal phosphides have been studied as prospective anode materials for sodium-ion batteries(SIBs)due to their higher specific capacity compared to other anode materials.However,rapid capacity decay and limited cycle li...Metal phosphides have been studied as prospective anode materials for sodium-ion batteries(SIBs)due to their higher specific capacity compared to other anode materials.However,rapid capacity decay and limited cycle life caused by volume expansion and low electrical conductivity of phosphides in SIBs remain still unsolved.To address these issues,GeP_(3) was first prepared by high-energy ball milling,and then Ketjen black(KB)was introduced to synthesize composite GeP_(3)/KB anode materials under controlled milling speed and time by a secondary ball milling process.During the ball milling process,GeP_(3) and KB form strong chemical bonds,resulting in a closely bonded composite.Consequently,the GeP_(3)/KB anodes was demonstrated excellent sodium storage performance,achieving a high reversible capacity of 933.41 mAh·g^(–1) at a current density of 0.05 A·g^(–1) for a special formula of GeP_(3)/KB-600-40 sample prepared at ball milling speed of 600 r/min for 40 h.Even at a high current density of 2 A·g^(–1) over 200 cycles,the capacity remains 314.52 mAh·g^(–1) with a retention rate of 66.6%.In conclusion,this work successfully prepares GeP_(3)/KB anode-carbon composite for electrodes by high-energy ball milling,which can restrict electrode volume expansion,enhance capacity,and improve cycle stability of SIBs.展开更多
Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity lim...Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.展开更多
The LiMnPO4/C composite material was synthesized via a sol-gel method based on the citric acid. The X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical performance tests were adopted to...The LiMnPO4/C composite material was synthesized via a sol-gel method based on the citric acid. The X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical performance tests were adopted to characterize the properties of LiMnPO4/C. The XRD studies show that the pure olivine phase LiMnPO4 can be obtained at a low temperature of 500 °C. The SEM analyses illustrate that the citric acid used as the chelating reagent and carbon source can restrain the particle size of LiMnPO4/C well. The LiMnPO4/C sample synthesized at 500 °C for 10 h performs the highest initial discharge capacity of 122.6 mA-h/g, retaining 112.4 mA-h/g over 30 cycles at 0.05C rate. The citric acid based sol-gel method is favor to obtain the high electrochemical performance of LiMnPO4/C.展开更多
Researching for interphase materials that can protect SiC fibers from oxygen and water vapor attacks has become one of the most important issues for the applications of SiC_f/SiC composites in high-temperature combust...Researching for interphase materials that can protect SiC fibers from oxygen and water vapor attacks has become one of the most important issues for the applications of SiC_f/SiC composites in high-temperature combustion environment. However, such kinds of interphase materials are not available yet. Herein,we report theoretically predicted properties of two promising interphase materials Y_5Si_3 C and Y_3Si_2C_2.Although crystallizing in different structures, they share the common features of layered structure,anisotropic chemical bonding, anisotropic electrical and mechanical properties, and low shear deformation resistance. The bulk moduli for Y_5Si_3C and Y_3Si_2C_2 are 78 and 93 GPa, respectively; while their shear moduli are 52 and 50GPa, respectively. The maximum to minimum Young's modulus ratios are1.44 for Y_5Si_3C and 3.27 for Y_3Si_2C_2. Based on the low shear deformation resistance and low Pugh's ratios(G/B = 0.666 forY_5Si_3C and 0.537 for Y_3Si_2C_2; G: shear modulus; B: bulk modulus), they are predicted as damage tolerant and soft ceramics with predicted Vickers hardness of 9.6 and 6.9 GPa, respectively.The cleavage plane and possible slip systems are(000 l) and(0001)[1120] and(1010)[0001] forY_5Si_3C,and those for Y_3Si_2C_2 are {h00} and(010)[101]. Since the oxidation products are water-vapor resistant Y2 Si2 O7, Y2 SiO5 and/or Y_2 O_3 upon oxidation, and the volume expansions are ca 140% and ca 26% for Y_5Si_3C and Y_3Si_2C_2, they are expected to seal the interfacial cracks in SiC_f/SiC composites. The unique combination of easy cleavage, low shear deformation resistance, volume expansions upon oxidation, and the resistance of the oxidation products to water vapor attack warrant them promising as interphase materials of SiC_f/SiC composites for water-vapor laden environment applications.展开更多
Ti3C2Tx,a novel two-dimensional layer material,is widely used as electrode materials of supercapacitor due to its good metal conductivity,redox reaction active surface,and so on.However,there are many challenges to be...Ti3C2Tx,a novel two-dimensional layer material,is widely used as electrode materials of supercapacitor due to its good metal conductivity,redox reaction active surface,and so on.However,there are many challenges to be addressed which impede Ti3C2Tx obtaining the ideal specific capacitance,such as restacking,re-crushing,and oxidation of titanium.Recently,many advances have been proposed to enhance capacitance performance of Ti3C2Tx.In this review,recent strategies for improving specific capacitance are summarized and compared,for example,film formation,surface modification,and composite method.Furthermore,in order to comprehend the mechanism of those efforts,this review analyzes the energy storage performance in different electrolytes and influencing factors.This review is expected to predict redouble research direction of Ti3C2Tx materials in supercapacitors.展开更多
In this paper,we report on the preparation of Li2FeSiO4,sintered Li2FeSiO4,and Li2FeSiO4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries.Spindle-like Li2F...In this paper,we report on the preparation of Li2FeSiO4,sintered Li2FeSiO4,and Li2FeSiO4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries.Spindle-like Li2FeSi04 was synthesized by a facile hydrothermal method with（NH4）2Fe（SO4）2 as the iron source.The spindle-like Li2FeSiO4 was sintered at 600 ℃ for 6 h in Ar atmosphere.Li2FeSiO4-C composite was obtained by the hydrothermal treatment of spindle-like Li2FeSiO4 in glucose solution at 190 ℃ for 3 h.Electrochemical measurements show that after carbon coating,the electrode performances such as discharge capacity and high-rate capability are greatly enhanced.In particular.Li2FeSiO4-C with carbon content of 7.21 wt%delivers the discharge capacities of 160.9 mAh·g-1 at room temperature and 213 mAh·g-1 at45℃（0.1 C）,revealing the potential application in lithium-ion batteries.展开更多
Pitch and TiB2/C green composite cathode material were respectively analyzed with simultaneous DSC-TGA, and effects of three baking processes of TiB2/C composite cathode material, i.e. K25, K5 and M5, on properties of...Pitch and TiB2/C green composite cathode material were respectively analyzed with simultaneous DSC-TGA, and effects of three baking processes of TiB2/C composite cathode material, i.e. K25, K5 and M5, on properties of TiB2/C composite cathode material were investigated. The results show that thermogravimetrie behavior of pitch and TiB2/C green composite cathode is similar, and appears the largest mass loss rate in the temperature range from 200 to 600 ℃. The bulk density variation of sample K5 before and after baking is the largest （11.9%）, that of sample K25 is the second, and that of sample M5 is the smallest （6.7%）. The crushing strength of sample M5 is the biggest （51.2 MPa）, that of sample K2.5 is the next, and that of sample K5 is the smallest （32.8 MPa）. But, the orders of the electrical resistivity and electrolysis expansion of samples are just opposite with the order of crushing strength. The heating rate has a great impact on the microstructure of sample. The faster the heating rate is, the bigger the pore size and porosity of sample are. Compared with the heating rate between 200 and 600℃ of samples K25 and K5, that of sample M5 is slower and suitable for baking process of TiB2/C composite cathode material.展开更多
A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical perf...A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical performance of the composite cathode material were investigated by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical tests. The Fe2P content, morphology and electrochemical performance of LiFePOa/（C＋Fe2P） composite depend on the calcination temperature. The optimized LiFePO4/（C＋FeeP） composite is prepared at 650 ~C and the optimized composite exhibits sphere-like morphology with porous structure and Fe2P content of about 3.2% （mass fraction）. The discharge capacity of the optimized LiFePO4/（C＋FeRP） at 0.1C is 156 and 161 mA.h/g at 25 and 55 ℃, respectively, and the corresponding capacity retentions are 96% after 30 cycles; while the capacity at 1C is 142 and 149 mA.h/g at 25 and 55 ℃, respectively, and the capacity still remains 135 and 142 mA-h/g after 30 cycles at 25 and 55℃, respectively.展开更多
The oilseed cake, vetch, rapeseed straw, wheat straw and corn straw were buried in tobacco-planted soil. The decomposition rates, the variation of active organic C and N contents in the residues and the relationship b...The oilseed cake, vetch, rapeseed straw, wheat straw and corn straw were buried in tobacco-planted soil. The decomposition rates, the variation of active organic C and N contents in the residues and the relationship between active organic C and N contents and decomposition rate were investigated. The results showed the decomposition rates of different organic materials were all high in the early period and then low in the late period. Among the organic materials, the decomposition rates ranked as oilseed cake 〉 vetch 〉 wheat straw and rapeseed straw 〉 corn straw. The decomposition rate was positively related to total N content （P〈0.01）, but was negatively related to the active organic C/N ratio （P〈0.01）. However, there was no significant relationship between decomposition ratio and active organic C content. With the proceeding of decomposition, the active organic C content and the total N content in rapeseed straw, vetch, wheat straw and corn straw all trended to increase, but the active organic C/N ratio trended to decrease. However, the variation of active organic C content, total N content and active organic C/N ratio in oilseed cake was on the contrary.展开更多
Multicomponent(Hf-Zr-Ta)B_(2)potentially provides improved ablation resistance compared with silicon-based ceramics.Here we deposited(Hf_(0.5-x/2)Zr_(0.5-x/2)Ta_(x))B_(2)(x=0,0.1,and 0.2)coatings onto C/C com-posites,...Multicomponent(Hf-Zr-Ta)B_(2)potentially provides improved ablation resistance compared with silicon-based ceramics.Here we deposited(Hf_(0.5-x/2)Zr_(0.5-x/2)Ta_(x))B_(2)(x=0,0.1,and 0.2)coatings onto C/C com-posites,and investigated their ablation behaviors under an oxyacetylene torch with a heat flux of 2.4 MW m^(-2).It was observed that the x=0.1 oxide scale bulged but was denser,and the x=0.2 oxide scale was blown away due to the formation of excessive liquid.Based on these findings,we further de-veloped a duplex(Hf-Zr-Ta)B_(2)coating that showed a linear recession rate close to zero(0.11μm s^(-1))after two 120-s ablation cycles.It is identified that the resulting oxide scale is mainly composed of(Hf,Zr)_(6)Ta_(2)O_(17)and(Hf,Zr,Ta)O_(2)by performing aberration-corrected(scanning)transmission electron microscopy.The protective mechanism is related to the peritectic transformation of orthorhombic-(Hf,Zr)_(6)Ta_(2)O_(17)to tetragonal-(Hf,Zr,Ta)O_(2)plus Ta-dominated liquid.This study contributes to the develop-ment of Ta-containing multicomponent UHTC bulk and coatings for ultra-high temperature applications.展开更多
An unlubricated sliding friction test on C/Cu composite materials is described. The result of the test proves that adhesive wear is the domination. At a certain speed, when the load upon the test block is light, the w...An unlubricated sliding friction test on C/Cu composite materials is described. The result of the test proves that adhesive wear is the domination. At a certain speed, when the load upon the test block is light, the wear rate remains low level and the friction pair has a good antifriction performance. But when the load increases to a certain value, the wear transitions happen, the wear becomes severe.展开更多
To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by...To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.展开更多
Air plasma ablation behavior of Cf/(Ti_(0.2)Zr_(0.2)Hf_(0.2)Nb_(0.2)Ta_(0.2))C-SiC composite was studied systematically with the surface temperature above 2000℃ at the ablation center.It presents a linear recession r...Air plasma ablation behavior of Cf/(Ti_(0.2)Zr_(0.2)Hf_(0.2)Nb_(0.2)Ta_(0.2))C-SiC composite was studied systematically with the surface temperature above 2000℃ at the ablation center.It presents a linear recession rate of 0.15μm/s and a mass recession rate of 2.05 mg/s after ablation at 4 MW/m^(2)(2000℃)for 300 s.Associated with the temperature gradient of the ablation surface,the oxidation products at different locations mainly consist of(TiZrHfNbTa)O_(x),(Zr_(x)Hf_(1-x))6(NbyTa_(1-y))_(2)O_(17),Ti(Nb_(x)Ta_(1-x))_(2)O_(7),(Hf_(x)Zr_(1-x))SiO_(4),and SiO_(2).Due to the synergistic effect of the multi-component oxides,oxidation products form a protective structure composed of high melting point oxide skeleton filled with relatively low melting point phases.It retards oxygen inward diffusion and prevents the composite fragmentation caused by plasma mechanical scouring.It is believed that the results would be helpful for further improving the ablation resistance by component design of high entropy ceramics and their composites.展开更多
To improve the compactness and properties of C/C-SiC-ZrC composites produced by precursor infiltration and pyrolysis(PIP)method,the low-temperature reactive melt infiltration(RMI)process was used to seal the composite...To improve the compactness and properties of C/C-SiC-ZrC composites produced by precursor infiltration and pyrolysis(PIP)method,the low-temperature reactive melt infiltration(RMI)process was used to seal the composites using Zr_(2)Cu as the filler.The microstructure,mechanical properties,and ablation properties of the Zr_(2)Cu packed composites were analyzed.Results show that during Zr_(2)Cu impregnation,the melt efficiently fills the large pores of the composites and is converted to ZrCu due to a partial reaction of zirconium with carbon.This results in an increase in composite density from 1.91 g/cm^(3)to 2.24 g/cm^(3)and a reduction in open porosity by 27.35%.Additionally,the flexural strength of Zr_(2)Cu packed C/C-SiC-ZrC composites is improved from 122.78±8.09 MPa to 135.53±5.40 MPa.After plasma ablation for 20 s,the modified composites demonstrate superior ablative resistance compared to PIP C/C-SiC-ZrC,with mass ablation and linear ablation rates of 2.77×10^(−3)g/s and 2.60×10^(−3)mm/s,respectively.The“selftranspiration”effect of the low-melting point copper-containing phase absorbs the heat of the plasma flame,further reducing the ablation temperature and promoting the formation of refined ZrO_(2)particles within the SiO_(2)melting layer.This provides more stable erosion protection for Zr_(2)Cu packed C/C-SiC-ZrC composites.展开更多
As a negative electrode material for lithium-ion batteries,silicon monoxide(SiO)suffers from dramatic volume changes during cycling,causing excessive stress within the electrode and resulting in electrode deformation ...As a negative electrode material for lithium-ion batteries,silicon monoxide(SiO)suffers from dramatic volume changes during cycling,causing excessive stress within the electrode and resulting in electrode deformation and fragmentation.This ultimately leads to a decrease in cell capacity.The trends of volume expansion and capacity change of the SiO/graphite(SiO/C)composite electrode during cycling were investigated via in situ expansion monitoring.First,a series of expansion test schemes were designed,and the linear relationship between negative electrode expansion and cell capacity degradation was quantitatively analyzed.Then,the effects of different initial pressures on the long-term cycling performance of the cell were evaluated.Finally,the mechanism of their effects was analyzed by scanning electron microscope.The results show that after 50 cycles,the cell capacity decreases from 2.556 mAh to 1.689 mAh,with a capacity retention ratio(CRR)of only 66.08%.A linear relationship between the capacity retention ratio and thickness expansion was found.Electrochemical measurements and scanning electron microscope images demonstrate that intense stress inhibits the lithiation of the negative electrode and that the electrode is more susceptible to irreversible damage during cycling.Overall,these results reveal the relationship between the cycling performance of SiO and the internal pressure of the electrode from a macroscopic point of view,which provides some reference for the application of SiO/C composite electrodes in lithium-ion batteries.展开更多
Boron carbide(B4C)and its composite materials demonstrate versatile applicability in energy storage technologies,particularly within new energy battery systems.This review systematically examines recent advances in th...Boron carbide(B4C)and its composite materials demonstrate versatile applicability in energy storage technologies,particularly within new energy battery systems.This review systematically examines recent advances in their battery applications.Commencing with an analysis of B4C's distinctive physicochemical properties,crystal structure,and synthesis methodologies,we critically evaluate its implementation in lithium-ion batteries(LIBs),sodium-ion batteries(SIBs),lithium-sulfur(Li-S)batteries,and fuel cells.The discussion substantiates how B4C-based materials augment critical battery performance metrics.Finally,development challenges and future research trajectories are outlined.We anticipate that through targeted performance optimization,innovative processing techniques,advanced interface engineering,and cross-disciplinary integration,B4C composites will unlock broader applications in next-generation energy storage systems.展开更多
The fracture behaviours and notch effects of single-edge-notched(SEN)and double-edge-notched(DEN)2D carbon fibre reinforced carbon matrix composites(C/Cs)were discussed and compared.The fracture behaviours of DEN and ...The fracture behaviours and notch effects of single-edge-notched(SEN)and double-edge-notched(DEN)2D carbon fibre reinforced carbon matrix composites(C/Cs)were discussed and compared.The fracture behaviours of DEN and SEN were performed by tensile and bending load-displacement relationships,and the effects of notch depth on notch sensitivity were determined by DEN specimens.The results from mechanical tests indicated that the SEN exhibited a brittle behaviour with linear elasticity,while the DEN exhibited a ductile behaviour with nonlinearity.It was also found that increasing notch depth and decreasing ligament width can lead to a higher ultimate tensile strength of DEN.On the other hand,the digital image correlation(DIC)method and acoustic emission(AE)system were also applied during the mechanical tests to study the local mechanical characteristics of shear damage,strain concentration and fracture behaviour of 2D C/Cs.The results revealed the mechanisms of notch insensitivity and explained the differences in fracture behaviours between SEN and DEN.展开更多
To overcome reliance on molds and the difficulty of fabricating complex geometries with traditional C/C composites,direct ink writing(DIW)with UV/heat dual curing was employed to produce high-performance C/C composite...To overcome reliance on molds and the difficulty of fabricating complex geometries with traditional C/C composites,direct ink writing(DIW)with UV/heat dual curing was employed to produce high-performance C/C composites.The rheological properties of the composite inks were systematically analyzed to assess the effects of phenolic resin(PR)and carbon fiber(CF)content.Results show pronounced shear-thinning behavior and strong thixotropy-both essential for stable DIW.Additionally,UV/heat curing behavior was characterized to provide theoretical insights for optimizing curing parameters.Notably,CF addition is found to significantly attenuate UV light penetration compared to pure PR.As CF content increases,the critical UV irradiation energy rises sharply from 68.47 to 911.19 mJ/cm^(2),necessitating precise adjustments to curing parameters.Preforms were pyrolyzed in a carbon tube furnace to examine pore-formation characteristics,and chemical vapor infiltration(CVI)was applied to filling the resulting pores,yielding C/C composites with a flexural strength of 115.19 MPa.展开更多
The design and synthesis of a novel π-conjugated fiuorescent framework by external ligand-assisted C-H olefination of heterocycles with excellent regioselectivity and broad substrate scope are reported herein.These n...The design and synthesis of a novel π-conjugated fiuorescent framework by external ligand-assisted C-H olefination of heterocycles with excellent regioselectivity and broad substrate scope are reported herein.These novel fiuorescent materials could present full-color-tunable emissions with large Stokes shifts. Furthermore, the protocol provides an opportunity to rapidly screen novel organic single-molecule whitelight materials with high fiuorescence quantum yields. The robust organic and low-cost white lightemitting diodes could rapidly be fabricated using the white-light-emitting material. Experimental data and theoretical calculations indicate that in the white-light dual emission the relatively short wavelength from high-lying singlet state emission and the relatively long wavelength from low-lying singlet state emission. The anti-Kasha dual-emission systems will provide a foundation for the development and application of organic single-molecule white light materials, effectively promoting the development and innovation of luminescent materials. In addition, this method demonstrated its potential application in the synthesis of new near-infrared(NIR) fiuorescence materials with large Stokes shifts based on the olefination of heterocycles.展开更多
文摘A new method for preparation of TaC coating on C/C composite material is reported. The amorphous ethylate tantalum jellied as the precursor is prepared and spread densely on the surface of the C/C composite material so as to form a multilayer film. In a graphitization furnace the multilayer film is transformed into TaC coating at various temperatures. Ethylate tantalum film is characterized by FT-IR (Fourier transform infrared) spectra, XRD (X-ray diffraction) and SEM (scanning electron microscopy) and TaC coating is characterized by XRD and SEM. At 1200℃ the coating contained TaC and Ta2O5, and at above 1400℃ only TaC is formed. The coating formed at 1600℃ is a continuous stratum structure, and that formed at 1600℃ is a porous net structure. Analysis on thermodynamics and formation mechanism of TaC indicates that, after ethylate tantalum is decomposed, Ta2O5 is first produced and then transformed into Ta2C, and newly formed Ta2C is transformed into TaC by the sufficient C at last.
基金National Natural Science Foundation of China Young Scientist Fund(22105120)Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2024QCY-KXJ-127)。
文摘Metal phosphides have been studied as prospective anode materials for sodium-ion batteries(SIBs)due to their higher specific capacity compared to other anode materials.However,rapid capacity decay and limited cycle life caused by volume expansion and low electrical conductivity of phosphides in SIBs remain still unsolved.To address these issues,GeP_(3) was first prepared by high-energy ball milling,and then Ketjen black(KB)was introduced to synthesize composite GeP_(3)/KB anode materials under controlled milling speed and time by a secondary ball milling process.During the ball milling process,GeP_(3) and KB form strong chemical bonds,resulting in a closely bonded composite.Consequently,the GeP_(3)/KB anodes was demonstrated excellent sodium storage performance,achieving a high reversible capacity of 933.41 mAh·g^(–1) at a current density of 0.05 A·g^(–1) for a special formula of GeP_(3)/KB-600-40 sample prepared at ball milling speed of 600 r/min for 40 h.Even at a high current density of 2 A·g^(–1) over 200 cycles,the capacity remains 314.52 mAh·g^(–1) with a retention rate of 66.6%.In conclusion,this work successfully prepares GeP_(3)/KB anode-carbon composite for electrodes by high-energy ball milling,which can restrict electrode volume expansion,enhance capacity,and improve cycle stability of SIBs.
基金financially supported by the National Natural Science Foundation of China(Nos.22302133 and 22405161)Central Guidance on Local Science and Technology Development Fund of Hebei Province,China(No.236Z4406G)+5 种基金the Natural Science Foundation of Hebei Education Department,China(No.BJ2025100)the Natural Science Foundation of Hebei Province,China(No.B2021210001)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2024D01A157)the Key R&D Plan of Karamay(No.2024zdyf0009)Karamay Innovation Environment Construction Plan(Innovative Talents)Project(No.2024hjcxrc0029)the Research Foundation of China University of Petroleum-Beijing at Karamay(No.XQZX20240023)
文摘Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.
基金Project (0991025) supported by Natural Science Foundation of Guangxi, ChinaProject (51164007) supported by the National Natural Science Foundation of ChinaProject (201101ZD008) supported by Educational Commission of Guangxi, China
文摘The LiMnPO4/C composite material was synthesized via a sol-gel method based on the citric acid. The X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical performance tests were adopted to characterize the properties of LiMnPO4/C. The XRD studies show that the pure olivine phase LiMnPO4 can be obtained at a low temperature of 500 °C. The SEM analyses illustrate that the citric acid used as the chelating reagent and carbon source can restrain the particle size of LiMnPO4/C well. The LiMnPO4/C sample synthesized at 500 °C for 10 h performs the highest initial discharge capacity of 122.6 mA-h/g, retaining 112.4 mA-h/g over 30 cycles at 0.05C rate. The citric acid based sol-gel method is favor to obtain the high electrochemical performance of LiMnPO4/C.
基金supported financially by the National Natural Science Foundation of China (Nos. U1435206 and 51672064)the Beijing Municipal Science & Technology Commission (No. D161100002416001)
文摘Researching for interphase materials that can protect SiC fibers from oxygen and water vapor attacks has become one of the most important issues for the applications of SiC_f/SiC composites in high-temperature combustion environment. However, such kinds of interphase materials are not available yet. Herein,we report theoretically predicted properties of two promising interphase materials Y_5Si_3 C and Y_3Si_2C_2.Although crystallizing in different structures, they share the common features of layered structure,anisotropic chemical bonding, anisotropic electrical and mechanical properties, and low shear deformation resistance. The bulk moduli for Y_5Si_3C and Y_3Si_2C_2 are 78 and 93 GPa, respectively; while their shear moduli are 52 and 50GPa, respectively. The maximum to minimum Young's modulus ratios are1.44 for Y_5Si_3C and 3.27 for Y_3Si_2C_2. Based on the low shear deformation resistance and low Pugh's ratios(G/B = 0.666 forY_5Si_3C and 0.537 for Y_3Si_2C_2; G: shear modulus; B: bulk modulus), they are predicted as damage tolerant and soft ceramics with predicted Vickers hardness of 9.6 and 6.9 GPa, respectively.The cleavage plane and possible slip systems are(000 l) and(0001)[1120] and(1010)[0001] forY_5Si_3C,and those for Y_3Si_2C_2 are {h00} and(010)[101]. Since the oxidation products are water-vapor resistant Y2 Si2 O7, Y2 SiO5 and/or Y_2 O_3 upon oxidation, and the volume expansions are ca 140% and ca 26% for Y_5Si_3C and Y_3Si_2C_2, they are expected to seal the interfacial cracks in SiC_f/SiC composites. The unique combination of easy cleavage, low shear deformation resistance, volume expansions upon oxidation, and the resistance of the oxidation products to water vapor attack warrant them promising as interphase materials of SiC_f/SiC composites for water-vapor laden environment applications.
基金National Natural Science Foundation of China with Grant No.21905304Natural Science Foundation of Shandong Province(No.ZR2019BEM031)the Fundamental Research Funds for the Central Universities(Nos.18CX02158A and 19CX05001A).
文摘Ti3C2Tx,a novel two-dimensional layer material,is widely used as electrode materials of supercapacitor due to its good metal conductivity,redox reaction active surface,and so on.However,there are many challenges to be addressed which impede Ti3C2Tx obtaining the ideal specific capacitance,such as restacking,re-crushing,and oxidation of titanium.Recently,many advances have been proposed to enhance capacitance performance of Ti3C2Tx.In this review,recent strategies for improving specific capacitance are summarized and compared,for example,film formation,surface modification,and composite method.Furthermore,in order to comprehend the mechanism of those efforts,this review analyzes the energy storage performance in different electrolytes and influencing factors.This review is expected to predict redouble research direction of Ti3C2Tx materials in supercapacitors.
基金supported by the Programs of National 973(2011CB935900)NSFC(21231005)+1 种基金MOE(B12015 and 113016A)the Fundamental Research Funds for the Central Universities
文摘In this paper,we report on the preparation of Li2FeSiO4,sintered Li2FeSiO4,and Li2FeSiO4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries.Spindle-like Li2FeSi04 was synthesized by a facile hydrothermal method with（NH4）2Fe（SO4）2 as the iron source.The spindle-like Li2FeSiO4 was sintered at 600 ℃ for 6 h in Ar atmosphere.Li2FeSiO4-C composite was obtained by the hydrothermal treatment of spindle-like Li2FeSiO4 in glucose solution at 190 ℃ for 3 h.Electrochemical measurements show that after carbon coating,the electrode performances such as discharge capacity and high-rate capability are greatly enhanced.In particular.Li2FeSiO4-C with carbon content of 7.21 wt%delivers the discharge capacities of 160.9 mAh·g-1 at room temperature and 213 mAh·g-1 at45℃（0.1 C）,revealing the potential application in lithium-ion batteries.
基金Project (2005CB623703) supported by the Major State Basic Research and Development Program of ChinaProject (2008AA030502) supported by the National High-Tech Research and Development Program of China
文摘Pitch and TiB2/C green composite cathode material were respectively analyzed with simultaneous DSC-TGA, and effects of three baking processes of TiB2/C composite cathode material, i.e. K25, K5 and M5, on properties of TiB2/C composite cathode material were investigated. The results show that thermogravimetrie behavior of pitch and TiB2/C green composite cathode is similar, and appears the largest mass loss rate in the temperature range from 200 to 600 ℃. The bulk density variation of sample K5 before and after baking is the largest （11.9%）, that of sample K25 is the second, and that of sample M5 is the smallest （6.7%）. The crushing strength of sample M5 is the biggest （51.2 MPa）, that of sample K2.5 is the next, and that of sample K5 is the smallest （32.8 MPa）. But, the orders of the electrical resistivity and electrolysis expansion of samples are just opposite with the order of crushing strength. The heating rate has a great impact on the microstructure of sample. The faster the heating rate is, the bigger the pore size and porosity of sample are. Compared with the heating rate between 200 and 600℃ of samples K25 and K5, that of sample M5 is slower and suitable for baking process of TiB2/C composite cathode material.
基金Project(50571091) supported by the National Natural Science Foundation of ChinaProject(09C947) supported by the Scientific Research Fund of Hunan Provincial Education Department,China
文摘A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical performance of the composite cathode material were investigated by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical tests. The Fe2P content, morphology and electrochemical performance of LiFePOa/（C＋Fe2P） composite depend on the calcination temperature. The optimized LiFePO4/（C＋FeeP） composite is prepared at 650 ~C and the optimized composite exhibits sphere-like morphology with porous structure and Fe2P content of about 3.2% （mass fraction）. The discharge capacity of the optimized LiFePO4/（C＋FeRP） at 0.1C is 156 and 161 mA.h/g at 25 and 55 ℃, respectively, and the corresponding capacity retentions are 96% after 30 cycles; while the capacity at 1C is 142 and 149 mA.h/g at 25 and 55 ℃, respectively, and the capacity still remains 135 and 142 mA-h/g after 30 cycles at 25 and 55℃, respectively.
基金Supported by National Key Technology Research and Development Program(2012BAD40B02Yunnan Provincial Tobacco Company Plan Project(2012YN48)~~
文摘The oilseed cake, vetch, rapeseed straw, wheat straw and corn straw were buried in tobacco-planted soil. The decomposition rates, the variation of active organic C and N contents in the residues and the relationship between active organic C and N contents and decomposition rate were investigated. The results showed the decomposition rates of different organic materials were all high in the early period and then low in the late period. Among the organic materials, the decomposition rates ranked as oilseed cake 〉 vetch 〉 wheat straw and rapeseed straw 〉 corn straw. The decomposition rate was positively related to total N content （P〈0.01）, but was negatively related to the active organic C/N ratio （P〈0.01）. However, there was no significant relationship between decomposition ratio and active organic C content. With the proceeding of decomposition, the active organic C content and the total N content in rapeseed straw, vetch, wheat straw and corn straw all trended to increase, but the active organic C/N ratio trended to decrease. However, the variation of active organic C content, total N content and active organic C/N ratio in oilseed cake was on the contrary.
基金supported by the National Key R&D Pro-gram of China(Grant No.2021YFA0715803)the National Natural Science Foundation of China(Grant Nos.52293373,52130205,and 52302091)+1 种基金the Joint Fund of Henan Province Science and Technol-ogy R&D Program(No.225200810002)the ND Basic Research Funds of Northwestern Polytechnical University(No.G2022WD).
文摘Multicomponent(Hf-Zr-Ta)B_(2)potentially provides improved ablation resistance compared with silicon-based ceramics.Here we deposited(Hf_(0.5-x/2)Zr_(0.5-x/2)Ta_(x))B_(2)(x=0,0.1,and 0.2)coatings onto C/C com-posites,and investigated their ablation behaviors under an oxyacetylene torch with a heat flux of 2.4 MW m^(-2).It was observed that the x=0.1 oxide scale bulged but was denser,and the x=0.2 oxide scale was blown away due to the formation of excessive liquid.Based on these findings,we further de-veloped a duplex(Hf-Zr-Ta)B_(2)coating that showed a linear recession rate close to zero(0.11μm s^(-1))after two 120-s ablation cycles.It is identified that the resulting oxide scale is mainly composed of(Hf,Zr)_(6)Ta_(2)O_(17)and(Hf,Zr,Ta)O_(2)by performing aberration-corrected(scanning)transmission electron microscopy.The protective mechanism is related to the peritectic transformation of orthorhombic-(Hf,Zr)_(6)Ta_(2)O_(17)to tetragonal-(Hf,Zr,Ta)O_(2)plus Ta-dominated liquid.This study contributes to the develop-ment of Ta-containing multicomponent UHTC bulk and coatings for ultra-high temperature applications.
文摘An unlubricated sliding friction test on C/Cu composite materials is described. The result of the test proves that adhesive wear is the domination. At a certain speed, when the load upon the test block is light, the wear rate remains low level and the friction pair has a good antifriction performance. But when the load increases to a certain value, the wear transitions happen, the wear becomes severe.
基金supported by the Tianjin Municipal Natural Science Foundation(No.23JCYBJC00040)the National Nat-ural Science Foundation of China(No.52175369)the Tian-jin Research Innovation Project for Postgraduate Students(No.2022SKY134).
文摘To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.
基金supported by the National Key R&D Program of China(No.2022YFB3707700)the Program of Shanghai Academic/Technology Research Leader(No.23XD1424300)the National Natural Science Foundation of China(No.52332003).
文摘Air plasma ablation behavior of Cf/(Ti_(0.2)Zr_(0.2)Hf_(0.2)Nb_(0.2)Ta_(0.2))C-SiC composite was studied systematically with the surface temperature above 2000℃ at the ablation center.It presents a linear recession rate of 0.15μm/s and a mass recession rate of 2.05 mg/s after ablation at 4 MW/m^(2)(2000℃)for 300 s.Associated with the temperature gradient of the ablation surface,the oxidation products at different locations mainly consist of(TiZrHfNbTa)O_(x),(Zr_(x)Hf_(1-x))6(NbyTa_(1-y))_(2)O_(17),Ti(Nb_(x)Ta_(1-x))_(2)O_(7),(Hf_(x)Zr_(1-x))SiO_(4),and SiO_(2).Due to the synergistic effect of the multi-component oxides,oxidation products form a protective structure composed of high melting point oxide skeleton filled with relatively low melting point phases.It retards oxygen inward diffusion and prevents the composite fragmentation caused by plasma mechanical scouring.It is believed that the results would be helpful for further improving the ablation resistance by component design of high entropy ceramics and their composites.
基金Open Fund of Zhijian Laboratory,Rocket Force University of Engineering(2024-ZJSYS-KF02-09)National Natural Science Foundation of China(51902028,52272034)+1 种基金Key Research and Development Program of Shaanxi(2023JBGS-15)Fundamental Research Funds for the Central Universities(Changan University,300102313202,300102312406)。
文摘To improve the compactness and properties of C/C-SiC-ZrC composites produced by precursor infiltration and pyrolysis(PIP)method,the low-temperature reactive melt infiltration(RMI)process was used to seal the composites using Zr_(2)Cu as the filler.The microstructure,mechanical properties,and ablation properties of the Zr_(2)Cu packed composites were analyzed.Results show that during Zr_(2)Cu impregnation,the melt efficiently fills the large pores of the composites and is converted to ZrCu due to a partial reaction of zirconium with carbon.This results in an increase in composite density from 1.91 g/cm^(3)to 2.24 g/cm^(3)and a reduction in open porosity by 27.35%.Additionally,the flexural strength of Zr_(2)Cu packed C/C-SiC-ZrC composites is improved from 122.78±8.09 MPa to 135.53±5.40 MPa.After plasma ablation for 20 s,the modified composites demonstrate superior ablative resistance compared to PIP C/C-SiC-ZrC,with mass ablation and linear ablation rates of 2.77×10^(−3)g/s and 2.60×10^(−3)mm/s,respectively.The“selftranspiration”effect of the low-melting point copper-containing phase absorbs the heat of the plasma flame,further reducing the ablation temperature and promoting the formation of refined ZrO_(2)particles within the SiO_(2)melting layer.This provides more stable erosion protection for Zr_(2)Cu packed C/C-SiC-ZrC composites.
基金supported by the Fundamental Research Funds for the Central Universities(WK2090000055)Anhui Provincial Natural Science Foundation of China(2308085QG231).
文摘As a negative electrode material for lithium-ion batteries,silicon monoxide(SiO)suffers from dramatic volume changes during cycling,causing excessive stress within the electrode and resulting in electrode deformation and fragmentation.This ultimately leads to a decrease in cell capacity.The trends of volume expansion and capacity change of the SiO/graphite(SiO/C)composite electrode during cycling were investigated via in situ expansion monitoring.First,a series of expansion test schemes were designed,and the linear relationship between negative electrode expansion and cell capacity degradation was quantitatively analyzed.Then,the effects of different initial pressures on the long-term cycling performance of the cell were evaluated.Finally,the mechanism of their effects was analyzed by scanning electron microscope.The results show that after 50 cycles,the cell capacity decreases from 2.556 mAh to 1.689 mAh,with a capacity retention ratio(CRR)of only 66.08%.A linear relationship between the capacity retention ratio and thickness expansion was found.Electrochemical measurements and scanning electron microscope images demonstrate that intense stress inhibits the lithiation of the negative electrode and that the electrode is more susceptible to irreversible damage during cycling.Overall,these results reveal the relationship between the cycling performance of SiO and the internal pressure of the electrode from a macroscopic point of view,which provides some reference for the application of SiO/C composite electrodes in lithium-ion batteries.
基金supported by the Science and Technology Program of Henan Province,China(No.222102230034)National College Student Innovation and Entrepreneurship Training Program(No.202510463011)the Characteristic Course Project of Integration of Specialtyand Innovation of Henan University of Technology in 2024(No.2024ZCRH-10).
文摘Boron carbide(B4C)and its composite materials demonstrate versatile applicability in energy storage technologies,particularly within new energy battery systems.This review systematically examines recent advances in their battery applications.Commencing with an analysis of B4C's distinctive physicochemical properties,crystal structure,and synthesis methodologies,we critically evaluate its implementation in lithium-ion batteries(LIBs),sodium-ion batteries(SIBs),lithium-sulfur(Li-S)batteries,and fuel cells.The discussion substantiates how B4C-based materials augment critical battery performance metrics.Finally,development challenges and future research trajectories are outlined.We anticipate that through targeted performance optimization,innovative processing techniques,advanced interface engineering,and cross-disciplinary integration,B4C composites will unlock broader applications in next-generation energy storage systems.
基金Funded by the National Natural Science Foundation of China(Nos.52072356 and 52032011)。
文摘The fracture behaviours and notch effects of single-edge-notched(SEN)and double-edge-notched(DEN)2D carbon fibre reinforced carbon matrix composites(C/Cs)were discussed and compared.The fracture behaviours of DEN and SEN were performed by tensile and bending load-displacement relationships,and the effects of notch depth on notch sensitivity were determined by DEN specimens.The results from mechanical tests indicated that the SEN exhibited a brittle behaviour with linear elasticity,while the DEN exhibited a ductile behaviour with nonlinearity.It was also found that increasing notch depth and decreasing ligament width can lead to a higher ultimate tensile strength of DEN.On the other hand,the digital image correlation(DIC)method and acoustic emission(AE)system were also applied during the mechanical tests to study the local mechanical characteristics of shear damage,strain concentration and fracture behaviour of 2D C/Cs.The results revealed the mechanisms of notch insensitivity and explained the differences in fracture behaviours between SEN and DEN.
基金supported by State Key Laboratory of Powder Metallurgy,Central South University,Changsha,China.
文摘To overcome reliance on molds and the difficulty of fabricating complex geometries with traditional C/C composites,direct ink writing(DIW)with UV/heat dual curing was employed to produce high-performance C/C composites.The rheological properties of the composite inks were systematically analyzed to assess the effects of phenolic resin(PR)and carbon fiber(CF)content.Results show pronounced shear-thinning behavior and strong thixotropy-both essential for stable DIW.Additionally,UV/heat curing behavior was characterized to provide theoretical insights for optimizing curing parameters.Notably,CF addition is found to significantly attenuate UV light penetration compared to pure PR.As CF content increases,the critical UV irradiation energy rises sharply from 68.47 to 911.19 mJ/cm^(2),necessitating precise adjustments to curing parameters.Preforms were pyrolyzed in a carbon tube furnace to examine pore-formation characteristics,and chemical vapor infiltration(CVI)was applied to filling the resulting pores,yielding C/C composites with a flexural strength of 115.19 MPa.
基金the Fundamental Research Funds for the Central Universities (Nos. 2024CDJXY0022023CDJYGRH-YB17+4 种基金2022CDJXY-025)the Venture & Innovation Support Program for Chongqing Overseas Returnees (No. cx2022061)the Natural Science Foundation of Chongqing (No. CSTB2022NSCQ-MSX1123)the Chongqing Talents: Exceptional Young Talents Project (No. cstc2021ycjh-bgzxm0067)the Hongshen Young Scholars Program from Chongqing University (No. 0247001104426) for financial support。
文摘The design and synthesis of a novel π-conjugated fiuorescent framework by external ligand-assisted C-H olefination of heterocycles with excellent regioselectivity and broad substrate scope are reported herein.These novel fiuorescent materials could present full-color-tunable emissions with large Stokes shifts. Furthermore, the protocol provides an opportunity to rapidly screen novel organic single-molecule whitelight materials with high fiuorescence quantum yields. The robust organic and low-cost white lightemitting diodes could rapidly be fabricated using the white-light-emitting material. Experimental data and theoretical calculations indicate that in the white-light dual emission the relatively short wavelength from high-lying singlet state emission and the relatively long wavelength from low-lying singlet state emission. The anti-Kasha dual-emission systems will provide a foundation for the development and application of organic single-molecule white light materials, effectively promoting the development and innovation of luminescent materials. In addition, this method demonstrated its potential application in the synthesis of new near-infrared(NIR) fiuorescence materials with large Stokes shifts based on the olefination of heterocycles.
