Tree mortality due to wood decay significantly affects the accuracy of growth and yield calculations,especially in forest management context.In Estonia,middle-aged and mature Norway spruce(Picea abies)stands are highl...Tree mortality due to wood decay significantly affects the accuracy of growth and yield calculations,especially in forest management context.In Estonia,middle-aged and mature Norway spruce(Picea abies)stands are highly susceptible to Armillaria sp.and Heterobasidion sp.infections.This study aimed to assess the spread of wood decay while contributing new data to the Estonian Network of Forest Research Plots(ENFRP)database.We hypothesized that wood decay is more frequent in stands with a higher proportion of spruce in the upper canopy layer.The study was conducted on 40 plots across mainland Estonia,with 10 trees per plot assessed both visually and with the PiCUS 3 Sonic Tomograph.The results showed no significant relationship between the share of spruce in the upper canopy layer and the presence of decayed trees(p>0.05),nor were there significant differences across sites or forest types(p>0.05).However,more decayed trees were detected in mesotrophic and meso-eutrophic forests.No significant association was found between prior thinning and decay occurrence(p>0.05).The significant difference between the visual and tomographic assessments(p<0.05)suggests that external decay indicators,such as cavities,may be unreliable.Significant differences at 30,80,and 130 cm above ground level(p<0.05)suggest,as expected,that decay progresses vertically along the trunk.The Hegyi index indicated that competition was significantly influenced by the presence of decayed trees(p<0.05),implying that some competition-related mortality may be linked to fungal infection.展开更多
Carbon-based low-dimensional materials(CLDM)with elemental carbon as the main component have unique physical and chemical properties,and become the focus of research in many fields including energy,environmental prote...Carbon-based low-dimensional materials(CLDM)with elemental carbon as the main component have unique physical and chemical properties,and become the focus of research in many fields including energy,environmental protection,and information technology.Notably,cellulose acetate,the main component of cigarette butts(CBs),is a one-dimensional precursor with a large specific surface area and aspect ratio.Still,their usefulness as building fillers has often been underestimated before.This review summarizes recent advances in CBs recycling and provides suggested guidelines for its use as a CLDM material in renewable energy.Specifically,we first describe the harmful effects of CBs as pollutants in our lives to emphasize the importance of proper recycling.We then summarize previous methods of recycling CBs waste,including clay bricks,asphalt concrete pavement,gypsum,acoustic materials,chemisorption,vector control,and corrosion control.The potential applications of CBs include triboelectric nanogenerator applications,flexible batteries,enhanced metal-organic framework material energy storage devices,and carbon-based hydrogen storage.Finally,the advantages of utilizing CBs-derived CLDM materials over conventional solutions in the energy field are discussed.This review will provide new avenues for solving the intractable problem of CBs and reducing the manufacturing costs of renewable materials.展开更多
Carbon Fiber Reinforced Thermosetting Composites(CFRTS)are crucial materials for lightweight manufacturing in the aerospace industry.To achieve high-quality butt joining between CFRTS,the Metal-Assistant-Clamping(MAC)...Carbon Fiber Reinforced Thermosetting Composites(CFRTS)are crucial materials for lightweight manufacturing in the aerospace industry.To achieve high-quality butt joining between CFRTS,the Metal-Assistant-Clamping(MAC)laser rotational welding method is proposed.In this method,two TC4 titanium alloy plates were clamped at the docking position of the CFRTS butt joint,and the TC4 titanium alloy plates were joined with the CFRTS using laser rotational welding technology.Laser cleaning and micro-textures as interface pretreatment were applied to enhance the joining strength.The impact of laser cleaning on the strength of the CFRTS butt joint was examined,revealing that epoxy resin on the CFRTS surface was effectively removed,leading to an increase in bonding strength between the CFRTS and TC4 titanium alloy.The microtextures,mechanical properties,and failure mechanism of CFRTS butt joints were investigated.The results indicate that the interface pretreatment created mechanical interlocks and chemical bonds between the CFRTS and TC4 alloy,further strengthening the CFRTS butt joint.The failure of the CFRTS butt joint was observed to occur between the Polyamide-6(PA6)resin and the surface carbon fibers of the CFRTS,predominantly through CFRTS interlayer tearing.展开更多
The dissimilar friction stir welding of pure copper/1350 aluminum alloy sheet with a thickness of 3 mm was investigated. Most of the rotating pin was inserted into the aluminum alloy side through a pin-off technique, ...The dissimilar friction stir welding of pure copper/1350 aluminum alloy sheet with a thickness of 3 mm was investigated. Most of the rotating pin was inserted into the aluminum alloy side through a pin-off technique, and sound welds were obtained at a rotation speed of 1000 r/min and a welding speed of 80 mm/min. Complicated microstructure was formed in the nugget, in which vortex-like pattern and lamella structure could be found. No intermetallic compounds were found in the nugget. The hardness distribution indicates that the hardness at the copper side of the nugget is higher than that at the aluminum alloy side, and the hardness at the bottom of the nugget is generally higher than that in other regions. The ultimate tensile strength and elongation of the dissimilar welds are 152 MPa and 6.3%, respectively. The fracture surface observation shows that the dissimilar joints fail with a ductile-brittle mixed fracture mode durin~ tensile test.展开更多
High performance 1 57μm spotsize converter monolithically integrated DFB is fabricated by the technique of self aligned selective area growth.The upper optical confinement layer and the butt coupled tapered thickn...High performance 1 57μm spotsize converter monolithically integrated DFB is fabricated by the technique of self aligned selective area growth.The upper optical confinement layer and the butt coupled tapered thickness waveguide are regrown simultaneously,which not only offeres the separated optimization of the active region and the integrated spotsize converter,but also reduces the difficulty of the butt joint selective regrowth.The threshold current is as low as 4 4mA.The output power at 49mA is 10 1mW.The side mode suppression ratio (SMSR) is 33 2dB.The vertical and horizontal far field divergence angles are as small as 9° and 15° respectively,the 1dB misalignment tolerance are 3 6μm and 3 4μm.展开更多
Laser-metal inert-gas(MIG)hybrid welding-brazing was applied to the butt joint of 6061-T6 aluminum alloy and 304 stainless steel.The microstructure and mechanical properties of the joint were studied.An excellent join...Laser-metal inert-gas(MIG)hybrid welding-brazing was applied to the butt joint of 6061-T6 aluminum alloy and 304 stainless steel.The microstructure and mechanical properties of the joint were studied.An excellent joint-section shape was achieved from good wettability on both sides of the stainless steel.Scanning electron microscopy,energy-dispersive spectroscopy and X-ray diffractometry indicated an intermetallic compound(IMC)layer at the 6061-T6/304 interface.The IMC thickness was controlled to be^2μm,which was attributed to the advantage of the laser-MIG hybrid method.Fe3Al dominated in the IMC layer at the interface between the stainless steel and the back reinforcement.The IMC layer in the remaining regions consisted mainly of Fe4Al13.A thinner IMC layer and better wettability on both sides of the stainless steel were obtained,because of the optimized energy distribution from a combination of a laser beam with a MIG arc.The average tensile strength of the joint with reinforcement using laser-MIG hybrid process was improved to be 174 MPa(60%of the 6061-T6 tensile strength),which was significantly higher than that of the joint by traditional MIG process.展开更多
Fracture propagation mechanisms in coalbed methane(CBM) reservoirs are very complex due to the development of the internal cleat system. In this paper, the characteristics of initiation and propagation of hydraulic fr...Fracture propagation mechanisms in coalbed methane(CBM) reservoirs are very complex due to the development of the internal cleat system. In this paper, the characteristics of initiation and propagation of hydraulic fractures in coal specimens at different angles between the face cleat and the maximum horizontal principal stress were investigated with hydraulic fracturing tests. The results indicate that the interactions between the hydraulic fractures and the cleat system have a major effect on fracture networks. "Step-like’’ fractures were formed in most experiments due to the existence of discontinuous butt cleats. The hydraulic fractures were more likely to divert or propagate along the butt cleat with an increase in the angles and a decrease in the horizontal principal stress difference. An increase in the injection rate and a decrease in the fracturing fluid viscosity were more conducive to fracture networks. In addition, the influence on fracture propagation of the residual coal fines in the wellbore was also studied. The existence of coal fines was an obstacle in fracturing, and no effective connection can be formed between fractures. The experimental investigation revealed the fracture propagation mechanisms and can provide guidance for hydraulic fracturing design of CBM reservoirs.展开更多
Stress concentration has a significant effect on fatigue properties of welded butt joint of bogie.The influences of joint geometric parameters {weld edge transition arc radius r,weld toe inclination angle θ） on stre...Stress concentration has a significant effect on fatigue properties of welded butt joint of bogie.The influences of joint geometric parameters {weld edge transition arc radius r,weld toe inclination angle θ） on stress concentration coefficient Kt at weld toe and fatigue life N were studied based on the finite element software ABAQUS/FE-SAFE,and the parametric equations were founded based on regression analysis of Origin software.The results show that weld edge transition arc radius r plays the most important role in stress concentration coefficient Kt as well as weld toe inclination angle 0.For the same inclination angle θ,stress concentration coefficient Kt decreases gradually with transition arc radius r increasing.With inclination angle θ increases,the effect of transition arc radius r on stress concentration factor Kt is increasing continuously,also the effect of change in stress concentration coefficient Kt caused by r on fatigue life N is increasing continuously.While in the case of same weld edge transition arc radius r,stress concentration coefficient Kt increases with inclination angle θincreasing.With transition arc radius r increases,the effect of inclination angle θ on stress concentration factor Kt is decreasing constantly,the effect of change in stress concentration coefficient Kt caused by θ on fatigue life N is decreasing constantly.The associated parametric equations have important instructive significance for the improvement of stress concentration degree and fatigue life of welded butt joint for train bogie.展开更多
The microstructure and mechanical properties of pulse metal inert-gas （MIG） welded dissimilar joints between 4 mm thick wrought 6061-T6 and cast A356-T6 aluminum alloy plates were investigated. The tensile strength ...The microstructure and mechanical properties of pulse metal inert-gas （MIG） welded dissimilar joints between 4 mm thick wrought 6061-T6 and cast A356-T6 aluminum alloy plates were investigated. The tensile strength of the joints reached 235 MPa, which is 83% of that of 6061 aluminum alloy, and then decreased with the increase of travel speed while keeping other welding parameters constant. The microstructure, composition and fractography of joints were examined by the optical microscopy （OM）, scanning electron microscopy （SEM） and electron probe microanalysis （EPMA）. Grain boundary liquation and segregation occurred in the partially melted zone （PMZ） on 6061 aluminum alloy side, and brittle Fe-rich phases were observed in partially melted zone on A356 aluminum alloy side. The minimum microhardness appeared in heat-affected zone （HAZ） near A356 aluminum alloy substrate. The samples during tensile test failed mainly in PMZ and HAZ on A356 aluminum alloy side through mixed fracture mode with quasi cleavage and dimples on fracture surface.展开更多
An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding （FBW） of frog highmanganese steel. The in...An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding （FBW） of frog highmanganese steel. The influence of temperature dependent material properties and the contact resistance were taken into account in FEM ＇simulation. Meanwhile, the lost materials due to .splutter was resolved by using birth and death element. The result of analyzing data shows that the moddel in the FBW flashing is reasonable and feasible, and can exactly simulate the temperature field distribution. The modeling provides reference for analysis of welding technologies on the temperature field of high-manganese steel in FBW.展开更多
Under the spirit of sustainable development, ‘lightweight’ has been gradually included into the vehicle design criterion by many manufacturers and used in automobile production. Following this trend, domestic wheel ...Under the spirit of sustainable development, ‘lightweight’ has been gradually included into the vehicle design criterion by many manufacturers and used in automobile production. Following this trend, domestic wheel suppliers also begin to study the technology of lightweight wheel. One way to achieve this goal is improving strength grade of the steel and optimizing the structure design in the field of steel wheels. But there are a few problems in flash butt welding process in the application of high strength steel, leading to high rejection rates. SW400 steel is a special high strength wheel steel developed by Benxi Steel. Taking SW400 steel as the research material, this article studys the feasibility of improving the properties of rim flash butt welded joints by adding preheating process.展开更多
The fatigue life evaluation of the girth butt weld within the welded cast steel joint was studied based on the extrapolation notch stress method.Firstly,the mesh sensitivity of the finite element model of the welded c...The fatigue life evaluation of the girth butt weld within the welded cast steel joint was studied based on the extrapolation notch stress method.Firstly,the mesh sensitivity of the finite element model of the welded cast steel joint was analyzed to determine the optimal mesh size.Based on the stress field analysis of the finite element model of the welded cast steel joint at the weld toe and weld root,the sharp model of the extrapolation notch stress method was applied to derive the effective notch stress of the rounded model belonging to the effective notch stress method,in which the key problem is to calculate the extrapolation point C,and the extrapolation point C has an exponential function relationship with the geometric parameters of the welded cast steel joint.By setting different values of geometric parameters,the corresponding value of parameter C is calculated,and then the functional relationship between the extrapolation point C and the geometric parameters can be obtained by the multiple linear regression analysis.Meanwhile,the fatigue life evaluation of the girth butt weld within welded cast steel joints based on the effective notch stress was performed according to the guideline recommended by the IIW(International Institute of Welding).The results indicate that the extrapolation notch stress method can effectively simplify the process of calculating the effective notch stress and accurately evaluate the fatigue life of the girth butt weld within welded cast steel joints.展开更多
Metal inert gas(MIG)welding was conducted with 12 mm thick 6082-T651 aluminum alloy plate to investigate the microstructure and mechanical properties of welded joint.The microstructure and element distribution of weld...Metal inert gas(MIG)welding was conducted with 12 mm thick 6082-T651 aluminum alloy plate to investigate the microstructure and mechanical properties of welded joint.The microstructure and element distribution of weld seam were characterized by electron backscattered diffraction(EBSD)and electron probe microanalysis(EPMA).The weld seam has typical cube texture({001}<100>)characteristics.The closer to the center of weld seam,the weaker the texture feature,the higher the proportion of high-angle grain boundaries.The average tensile strength of joint was 232 MPa which is up to 72%of 6082 aluminum alloy base metal,and the bending angle for the root bend test sample reached 90°without cracks.The lack of strengthening phase and the existence of welding pores and inclusions in the weld seam caused the degradation of mechanical properties of resultant joint.The microhardness increased from the weld center to the base metal,but the overaging zone caused by welding thermal cycle was softening part of the joint,which had lower hardness than the weld seam.展开更多
The effects of parallel and angular butt designs with different gap widths on the microstructure and mechanical properties of the resultant magnesium joints in gas tungsten arc welding were investigated. The experimen...The effects of parallel and angular butt designs with different gap widths on the microstructure and mechanical properties of the resultant magnesium joints in gas tungsten arc welding were investigated. The experimental results displayed that the tensile strength of the joint made with angular butt joint and 0.3 ram-wide gap reached 266 MPa, the joint fractured through the heat-affected zone or base metal during tensile testing, and the microstructure examination showed that no macropore appeared in the fusion zone. However, macropores in diameter of larger than 200 micron occurred for other joint designs, the tensile strength of the resultant joints decreased, and the joints fractured through the fusion zone during tensile testing. The fracture surfaces were examined by scanning electron microscopy and the microhardness distribution in the joints was measured by using a Vickers microhardness tester.展开更多
Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback （DFB） lasers using varied ridge width with a 4 x 1-multimode-interference （MMI） optical combiner and a semiconductor optical amplifier...Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback （DFB） lasers using varied ridge width with a 4 x 1-multimode-interference （MMI） optical combiner and a semiconductor optical amplifier （SOA） is demon- strated. The average output power and the threshold current are 1.8 mW and 35 mA, respectively, when the injection current of the SOA is 100 mA, with a side mode suppression ratio （SMSR） exceeding 40 dB. The four channels have a 1-nm average channel spacing and can operate separately or simultaneously.展开更多
A fiber cladding surface plasmon resonance(SPR)bending sensor is realized by the cladding of the fiber structure.By employing coating film,the sensing zone is protected and the toughness of the sensor increases.Three ...A fiber cladding surface plasmon resonance(SPR)bending sensor is realized by the cladding of the fiber structure.By employing coating film,the sensing zone is protected and the toughness of the sensor increases.Three different sensing probes are tested,the experiment results indicate that the two parameters(wavelength sensitivity and light intensity sensitivity)sensing performances of the eccentric butt joint structures are superior to that of hetero-core structure,and the SPR bending sensor based on hetero-core structure is stable and uneasy to damage.By employing hetero-core fiber and silver film,a fiber cladding SPR bending sensor with better stabilization and sensing performance is realized.The proposed fabricating method of sensing probe with coating film provides a new approach for fiber SPR-distributed bending sensor.展开更多
The construction of grouting butt joints of bamboo tubes is simple and efficient.However,when the joint is bent,the low tensile strength of the mortar easily leads to cracking of the mortar prior to the failure of the...The construction of grouting butt joints of bamboo tubes is simple and efficient.However,when the joint is bent,the low tensile strength of the mortar easily leads to cracking of the mortar prior to the failure of the bamboo tube.In this paper,a comparative test of the bending capacity was performed on grouting butt joints reinforced by nonperforated,fully perforated,and semiperforated steel plates embedded in bamboo tubes to obtain the loaddisplacement curves and ultimate bearing capacity of various specimens.The strengthening effect of CFRP pasted on bamboo tubes was also studied.The results show that the opening at the end of the steel plate is beneficial to resist the slip between the mortar and steel plate,while the complete section in the middle of the steel plate is conducive to making full use of the tensile strength of the steel plate.Therefore,it is best to insert the semiperforated steel plate with openings in the end and without openings in the middle into the mortar to enhance the bending properties of the grouting butt joint,which can make the failure mode of the joint change from brittle failure of mortar to ductile compression failure of bamboo tube.In addition,pasting CFRP sheets on the external wall of the bamboo tube helps to reduce the tensile stress of the mortar,while increasing the width of the steel plate can increase the bending moment of inertia of the mixture of the steel plate and mortar.These two complementary measures are very effective in delaying the cracking of the bamboo tube and improving the bending capacity of the joint.展开更多
基金support was provided by Estonian Environmental Investment Centre.
文摘Tree mortality due to wood decay significantly affects the accuracy of growth and yield calculations,especially in forest management context.In Estonia,middle-aged and mature Norway spruce(Picea abies)stands are highly susceptible to Armillaria sp.and Heterobasidion sp.infections.This study aimed to assess the spread of wood decay while contributing new data to the Estonian Network of Forest Research Plots(ENFRP)database.We hypothesized that wood decay is more frequent in stands with a higher proportion of spruce in the upper canopy layer.The study was conducted on 40 plots across mainland Estonia,with 10 trees per plot assessed both visually and with the PiCUS 3 Sonic Tomograph.The results showed no significant relationship between the share of spruce in the upper canopy layer and the presence of decayed trees(p>0.05),nor were there significant differences across sites or forest types(p>0.05).However,more decayed trees were detected in mesotrophic and meso-eutrophic forests.No significant association was found between prior thinning and decay occurrence(p>0.05).The significant difference between the visual and tomographic assessments(p<0.05)suggests that external decay indicators,such as cavities,may be unreliable.Significant differences at 30,80,and 130 cm above ground level(p<0.05)suggest,as expected,that decay progresses vertically along the trunk.The Hegyi index indicated that competition was significantly influenced by the presence of decayed trees(p<0.05),implying that some competition-related mortality may be linked to fungal infection.
基金supported by Hubei Province Technology Innovation Program Project(2024BCB073)the National Natural Science Foundation of China(52402249)the China Postdoctoral Science Foundation(2021M690930).
文摘Carbon-based low-dimensional materials(CLDM)with elemental carbon as the main component have unique physical and chemical properties,and become the focus of research in many fields including energy,environmental protection,and information technology.Notably,cellulose acetate,the main component of cigarette butts(CBs),is a one-dimensional precursor with a large specific surface area and aspect ratio.Still,their usefulness as building fillers has often been underestimated before.This review summarizes recent advances in CBs recycling and provides suggested guidelines for its use as a CLDM material in renewable energy.Specifically,we first describe the harmful effects of CBs as pollutants in our lives to emphasize the importance of proper recycling.We then summarize previous methods of recycling CBs waste,including clay bricks,asphalt concrete pavement,gypsum,acoustic materials,chemisorption,vector control,and corrosion control.The potential applications of CBs include triboelectric nanogenerator applications,flexible batteries,enhanced metal-organic framework material energy storage devices,and carbon-based hydrogen storage.Finally,the advantages of utilizing CBs-derived CLDM materials over conventional solutions in the energy field are discussed.This review will provide new avenues for solving the intractable problem of CBs and reducing the manufacturing costs of renewable materials.
基金the financial support by the Ningbo"Science and Technology Innovation Yongjiang 2035"Key Research and Development Program,China(Nos.2025Z188,2025Z016)"The 14th Five Year Plan"Major Technical Research and Development Project of Zhenhai District,China(No.2023001)the CAS Youth Interdisciplinary Team,China(No.2023-135)。
文摘Carbon Fiber Reinforced Thermosetting Composites(CFRTS)are crucial materials for lightweight manufacturing in the aerospace industry.To achieve high-quality butt joining between CFRTS,the Metal-Assistant-Clamping(MAC)laser rotational welding method is proposed.In this method,two TC4 titanium alloy plates were clamped at the docking position of the CFRTS butt joint,and the TC4 titanium alloy plates were joined with the CFRTS using laser rotational welding technology.Laser cleaning and micro-textures as interface pretreatment were applied to enhance the joining strength.The impact of laser cleaning on the strength of the CFRTS butt joint was examined,revealing that epoxy resin on the CFRTS surface was effectively removed,leading to an increase in bonding strength between the CFRTS and TC4 titanium alloy.The microtextures,mechanical properties,and failure mechanism of CFRTS butt joints were investigated.The results indicate that the interface pretreatment created mechanical interlocks and chemical bonds between the CFRTS and TC4 alloy,further strengthening the CFRTS butt joint.The failure of the CFRTS butt joint was observed to occur between the Polyamide-6(PA6)resin and the surface carbon fibers of the CFRTS,predominantly through CFRTS interlayer tearing.
基金Project (2009ZM0264) supported by the Fundamental Research Funds for the Central Universities,China
文摘The dissimilar friction stir welding of pure copper/1350 aluminum alloy sheet with a thickness of 3 mm was investigated. Most of the rotating pin was inserted into the aluminum alloy side through a pin-off technique, and sound welds were obtained at a rotation speed of 1000 r/min and a welding speed of 80 mm/min. Complicated microstructure was formed in the nugget, in which vortex-like pattern and lamella structure could be found. No intermetallic compounds were found in the nugget. The hardness distribution indicates that the hardness at the copper side of the nugget is higher than that at the aluminum alloy side, and the hardness at the bottom of the nugget is generally higher than that in other regions. The ultimate tensile strength and elongation of the dissimilar welds are 152 MPa and 6.3%, respectively. The fracture surface observation shows that the dissimilar joints fail with a ductile-brittle mixed fracture mode durin~ tensile test.
文摘High performance 1 57μm spotsize converter monolithically integrated DFB is fabricated by the technique of self aligned selective area growth.The upper optical confinement layer and the butt coupled tapered thickness waveguide are regrown simultaneously,which not only offeres the separated optimization of the active region and the integrated spotsize converter,but also reduces the difficulty of the butt joint selective regrowth.The threshold current is as low as 4 4mA.The output power at 49mA is 10 1mW.The side mode suppression ratio (SMSR) is 33 2dB.The vertical and horizontal far field divergence angles are as small as 9° and 15° respectively,the 1dB misalignment tolerance are 3 6μm and 3 4μm.
基金Project(51405398) supported by the National Natural Science Foundation of China
文摘Laser-metal inert-gas(MIG)hybrid welding-brazing was applied to the butt joint of 6061-T6 aluminum alloy and 304 stainless steel.The microstructure and mechanical properties of the joint were studied.An excellent joint-section shape was achieved from good wettability on both sides of the stainless steel.Scanning electron microscopy,energy-dispersive spectroscopy and X-ray diffractometry indicated an intermetallic compound(IMC)layer at the 6061-T6/304 interface.The IMC thickness was controlled to be^2μm,which was attributed to the advantage of the laser-MIG hybrid method.Fe3Al dominated in the IMC layer at the interface between the stainless steel and the back reinforcement.The IMC layer in the remaining regions consisted mainly of Fe4Al13.A thinner IMC layer and better wettability on both sides of the stainless steel were obtained,because of the optimized energy distribution from a combination of a laser beam with a MIG arc.The average tensile strength of the joint with reinforcement using laser-MIG hybrid process was improved to be 174 MPa(60%of the 6061-T6 tensile strength),which was significantly higher than that of the joint by traditional MIG process.
基金funded by the National Science and Technology Major Project of China (2016ZX05046004-003)Northeast Petroleum University Innovation Foundation for Postgraduate (YJSCX2017-010NEPU and YJSCX2017-009NEPU)
文摘Fracture propagation mechanisms in coalbed methane(CBM) reservoirs are very complex due to the development of the internal cleat system. In this paper, the characteristics of initiation and propagation of hydraulic fractures in coal specimens at different angles between the face cleat and the maximum horizontal principal stress were investigated with hydraulic fracturing tests. The results indicate that the interactions between the hydraulic fractures and the cleat system have a major effect on fracture networks. "Step-like’’ fractures were formed in most experiments due to the existence of discontinuous butt cleats. The hydraulic fractures were more likely to divert or propagate along the butt cleat with an increase in the angles and a decrease in the horizontal principal stress difference. An increase in the injection rate and a decrease in the fracturing fluid viscosity were more conducive to fracture networks. In addition, the influence on fracture propagation of the residual coal fines in the wellbore was also studied. The existence of coal fines was an obstacle in fracturing, and no effective connection can be formed between fractures. The experimental investigation revealed the fracture propagation mechanisms and can provide guidance for hydraulic fracturing design of CBM reservoirs.
基金supported by the National Natural Science Foundation of China(No.51365014)Natural Science Foundation of Jiangxi Province(No.20151BAB206007)
文摘Stress concentration has a significant effect on fatigue properties of welded butt joint of bogie.The influences of joint geometric parameters {weld edge transition arc radius r,weld toe inclination angle θ） on stress concentration coefficient Kt at weld toe and fatigue life N were studied based on the finite element software ABAQUS/FE-SAFE,and the parametric equations were founded based on regression analysis of Origin software.The results show that weld edge transition arc radius r plays the most important role in stress concentration coefficient Kt as well as weld toe inclination angle 0.For the same inclination angle θ,stress concentration coefficient Kt decreases gradually with transition arc radius r increasing.With inclination angle θ increases,the effect of transition arc radius r on stress concentration factor Kt is increasing continuously,also the effect of change in stress concentration coefficient Kt caused by r on fatigue life N is increasing continuously.While in the case of same weld edge transition arc radius r,stress concentration coefficient Kt increases with inclination angle θincreasing.With transition arc radius r increases,the effect of inclination angle θ on stress concentration factor Kt is decreasing constantly,the effect of change in stress concentration coefficient Kt caused by θ on fatigue life N is decreasing constantly.The associated parametric equations have important instructive significance for the improvement of stress concentration degree and fatigue life of welded butt joint for train bogie.
基金financially supported by the National Natural Science Foundation of China(No.51374048)the Fundamental Research Funds for the Central Universities(No.DUT16RC(3)009)
文摘The microstructure and mechanical properties of pulse metal inert-gas （MIG） welded dissimilar joints between 4 mm thick wrought 6061-T6 and cast A356-T6 aluminum alloy plates were investigated. The tensile strength of the joints reached 235 MPa, which is 83% of that of 6061 aluminum alloy, and then decreased with the increase of travel speed while keeping other welding parameters constant. The microstructure, composition and fractography of joints were examined by the optical microscopy （OM）, scanning electron microscopy （SEM） and electron probe microanalysis （EPMA）. Grain boundary liquation and segregation occurred in the partially melted zone （PMZ） on 6061 aluminum alloy side, and brittle Fe-rich phases were observed in partially melted zone on A356 aluminum alloy side. The minimum microhardness appeared in heat-affected zone （HAZ） near A356 aluminum alloy substrate. The samples during tensile test failed mainly in PMZ and HAZ on A356 aluminum alloy side through mixed fracture mode with quasi cleavage and dimples on fracture surface.
文摘An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding （FBW） of frog highmanganese steel. The influence of temperature dependent material properties and the contact resistance were taken into account in FEM ＇simulation. Meanwhile, the lost materials due to .splutter was resolved by using birth and death element. The result of analyzing data shows that the moddel in the FBW flashing is reasonable and feasible, and can exactly simulate the temperature field distribution. The modeling provides reference for analysis of welding technologies on the temperature field of high-manganese steel in FBW.
基金supported by the Key Science and Technology of Jilin Province(Grant No.20140204070GX)
文摘Under the spirit of sustainable development, ‘lightweight’ has been gradually included into the vehicle design criterion by many manufacturers and used in automobile production. Following this trend, domestic wheel suppliers also begin to study the technology of lightweight wheel. One way to achieve this goal is improving strength grade of the steel and optimizing the structure design in the field of steel wheels. But there are a few problems in flash butt welding process in the application of high strength steel, leading to high rejection rates. SW400 steel is a special high strength wheel steel developed by Benxi Steel. Taking SW400 steel as the research material, this article studys the feasibility of improving the properties of rim flash butt welded joints by adding preheating process.
基金The National Key Research and Development Program of China(No.2017YFC0805100),the National Natural Science Foundation of China(No.51578137)the Priority Academic Program Development of Jiangsu Higher Education Institutions,the Open Research Fund Program of Jiangsu Key Laboratory of Engineering Mechanics.
文摘The fatigue life evaluation of the girth butt weld within the welded cast steel joint was studied based on the extrapolation notch stress method.Firstly,the mesh sensitivity of the finite element model of the welded cast steel joint was analyzed to determine the optimal mesh size.Based on the stress field analysis of the finite element model of the welded cast steel joint at the weld toe and weld root,the sharp model of the extrapolation notch stress method was applied to derive the effective notch stress of the rounded model belonging to the effective notch stress method,in which the key problem is to calculate the extrapolation point C,and the extrapolation point C has an exponential function relationship with the geometric parameters of the welded cast steel joint.By setting different values of geometric parameters,the corresponding value of parameter C is calculated,and then the functional relationship between the extrapolation point C and the geometric parameters can be obtained by the multiple linear regression analysis.Meanwhile,the fatigue life evaluation of the girth butt weld within welded cast steel joints based on the effective notch stress was performed according to the guideline recommended by the IIW(International Institute of Welding).The results indicate that the extrapolation notch stress method can effectively simplify the process of calculating the effective notch stress and accurately evaluate the fatigue life of the girth butt weld within welded cast steel joints.
基金Project was supported by the National Natural Science Foundation of China(51674060)the Collaborative Innovation Center of Major Machine Manufacturing in Liaoning。
文摘Metal inert gas(MIG)welding was conducted with 12 mm thick 6082-T651 aluminum alloy plate to investigate the microstructure and mechanical properties of welded joint.The microstructure and element distribution of weld seam were characterized by electron backscattered diffraction(EBSD)and electron probe microanalysis(EPMA).The weld seam has typical cube texture({001}<100>)characteristics.The closer to the center of weld seam,the weaker the texture feature,the higher the proportion of high-angle grain boundaries.The average tensile strength of joint was 232 MPa which is up to 72%of 6082 aluminum alloy base metal,and the bending angle for the root bend test sample reached 90°without cracks.The lack of strengthening phase and the existence of welding pores and inclusions in the weld seam caused the degradation of mechanical properties of resultant joint.The microhardness increased from the weld center to the base metal,but the overaging zone caused by welding thermal cycle was softening part of the joint,which had lower hardness than the weld seam.
基金supported by the State Key Lab of Advanced Welding and Joining,Harbin Institute of Technology (Project No.09009)
文摘The effects of parallel and angular butt designs with different gap widths on the microstructure and mechanical properties of the resultant magnesium joints in gas tungsten arc welding were investigated. The experimental results displayed that the tensile strength of the joint made with angular butt joint and 0.3 ram-wide gap reached 266 MPa, the joint fractured through the heat-affected zone or base metal during tensile testing, and the microstructure examination showed that no macropore appeared in the fusion zone. However, macropores in diameter of larger than 200 micron occurred for other joint designs, the tensile strength of the resultant joints decreased, and the joints fractured through the fusion zone during tensile testing. The fracture surfaces were examined by scanning electron microscopy and the microhardness distribution in the joints was measured by using a Vickers microhardness tester.
基金Project supported by the National High Technology Research and Pevelopment Program of China (Grant Nos. 2011AA010303 and 2012AA012203)the National Basic Research Program of China (Grant No. 2011CB301702)the National Natural Science Foundation of China (Grant Nos. 61021003 and 61090392)
文摘Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback （DFB） lasers using varied ridge width with a 4 x 1-multimode-interference （MMI） optical combiner and a semiconductor optical amplifier （SOA） is demon- strated. The average output power and the threshold current are 1.8 mW and 35 mA, respectively, when the injection current of the SOA is 100 mA, with a side mode suppression ratio （SMSR） exceeding 40 dB. The four channels have a 1-nm average channel spacing and can operate separately or simultaneously.
基金Project supported by the National Natural Science Foundation of China(Grant No.61705025)the Natural Science Foundation of Heilongjiang Province,China(Grant No.F2018027)+4 种基金the Fund from Chongqing Municipal Key Laboratory of Institutions of Higher Education(Grant No.20173)the Program of Chongqing Development and Reform Commission(Grant No.20171007)the Natural Science Foundation of Chongqing,China(Grant Nos.cstc2019jcyjmsxmX0431 and cstc2018jcyjAX0817)the Science and Technology Project Affiliated to the Education Department of Chongqing Municipality,China(Grant Nos.KJQN201801217,KJQN201901226,and KJ1710247)the Fundamental Research Funds for Chongqing Three Gorges University of China(Grant No.19ZDPY08)。
文摘A fiber cladding surface plasmon resonance(SPR)bending sensor is realized by the cladding of the fiber structure.By employing coating film,the sensing zone is protected and the toughness of the sensor increases.Three different sensing probes are tested,the experiment results indicate that the two parameters(wavelength sensitivity and light intensity sensitivity)sensing performances of the eccentric butt joint structures are superior to that of hetero-core structure,and the SPR bending sensor based on hetero-core structure is stable and uneasy to damage.By employing hetero-core fiber and silver film,a fiber cladding SPR bending sensor with better stabilization and sensing performance is realized.The proposed fabricating method of sensing probe with coating film provides a new approach for fiber SPR-distributed bending sensor.
基金The authors are grateful for the financial support of the National Key Research and Development Program of China(2017YFC0703500).
文摘The construction of grouting butt joints of bamboo tubes is simple and efficient.However,when the joint is bent,the low tensile strength of the mortar easily leads to cracking of the mortar prior to the failure of the bamboo tube.In this paper,a comparative test of the bending capacity was performed on grouting butt joints reinforced by nonperforated,fully perforated,and semiperforated steel plates embedded in bamboo tubes to obtain the loaddisplacement curves and ultimate bearing capacity of various specimens.The strengthening effect of CFRP pasted on bamboo tubes was also studied.The results show that the opening at the end of the steel plate is beneficial to resist the slip between the mortar and steel plate,while the complete section in the middle of the steel plate is conducive to making full use of the tensile strength of the steel plate.Therefore,it is best to insert the semiperforated steel plate with openings in the end and without openings in the middle into the mortar to enhance the bending properties of the grouting butt joint,which can make the failure mode of the joint change from brittle failure of mortar to ductile compression failure of bamboo tube.In addition,pasting CFRP sheets on the external wall of the bamboo tube helps to reduce the tensile stress of the mortar,while increasing the width of the steel plate can increase the bending moment of inertia of the mixture of the steel plate and mortar.These two complementary measures are very effective in delaying the cracking of the bamboo tube and improving the bending capacity of the joint.
