Extraction of the lower third molar is one of the most common procedures performed in oral surgery. In general, impacted tooth extraction involves sectioning the tooth’s crown and roots. In order to divide the impact...Extraction of the lower third molar is one of the most common procedures performed in oral surgery. In general, impacted tooth extraction involves sectioning the tooth’s crown and roots. In order to divide the impacted tooth so that it can be extracted, high-speed air turbine drills are frequently used. However, complications related to air turbine drills may occur. In this report, we propose an alternative tooth sectioning method that obviates the need for air turbine drill use by using a low-speed straight handpiece and carbide bur. A 21-year-old female patient presented to the institute’s dental hospital complaining of symptoms localized to the left lower third molar tooth that were suggestive of impaction. After physical examination, tooth extraction of the impacted left lower third molar was proposed and the patient consented to the procedure. The crown was divided using a conventional straight low-speed handpiece and carbide bur. This carbide bur can easily cut through the enamel of crown. On post-operative day number five, suture was removed and the wound was extremely clear. This technique could minimise intra-operative time and reduce the morbidity associated with air turbine drill assisted lower third molar extraction.展开更多
Effect of thermal drilling condition on burring of 0.2C-(1.0-2.5)Si-(1.0-2.0)Mn (mass%) ultrahigh strength TRIP-aided sheet steels with polygonal ferrite matrix (TDP steels) was investigated for automotive application...Effect of thermal drilling condition on burring of 0.2C-(1.0-2.5)Si-(1.0-2.0)Mn (mass%) ultrahigh strength TRIP-aided sheet steels with polygonal ferrite matrix (TDP steels) was investigated for automotive applications.The combined rotational and downward force of the thermal drilling tool bit created friction heat.The height of the bushing was roughly 3 to 4 times the initial sheet thickness.The bushings are ideal for thread applications,as the strength of threads was significantly increased.We found that the burring and tapping contributed to the improvement of the tensile strength of 980 MPa class TRIP steel.展开更多
Aim: To evaluate the comparative efficacy of Polymer bur (Smartprep) and Conventional burs (Carbide bur & Diamond Points) in selective Dentin caries removal. Materials and method: 15 freshly extracted carious huma...Aim: To evaluate the comparative efficacy of Polymer bur (Smartprep) and Conventional burs (Carbide bur & Diamond Points) in selective Dentin caries removal. Materials and method: 15 freshly extracted carious human premolars and molars were selected for this study. These teeth were split in the center of carious lesion, in order to obtain two corresponding half. Thus 30 samples were prepared in this way. These were randomly divided in to 3 groups of 10 samples each. Group 1: The carious portion of these samples was excavated with the help of polymer bur Smartprep (SS White). Group 3: Prepared with Tungsten carbide round bur (No. 018). Group 3: Prepared with the help of Diamond points (No. 018). The period of time involved in this process is measured. After excavation of all carious lesions, a longitudinal section from mid most part of lesion was obtain with the help of diamond disc at slow speed. After staining with caries detector dye “Seek”, the sections were subjected to histological evaluation under stereomicro-scope. The thickness of remaining caries is measured in more or less than 1 mm. Results: The difference in grading of remaining carious dentin between Polymer bur and Conventional burs were statistically non- significant, but Polymer bur taken more time in comparison to Conventional burs. Conclusion: Smartprep bur is more conservative in selectively dentin caries removal than Conventional burs but same time it is more time consuming than Conventional burs.展开更多
Objective: Zirconia is increasingly being used in restorative dentistry but its removal is often a difficult procedure due to its resistance to cutting with conventional diamond burs. Zirconia cutting burs have been d...Objective: Zirconia is increasingly being used in restorative dentistry but its removal is often a difficult procedure due to its resistance to cutting with conventional diamond burs. Zirconia cutting burs have been developed and this study aims to compare 4 such burs. Methods: 35 experienced restorative dentists selected from our Practice Based Network (PBN) were asked to evaluate the cutting of a 1 mm groove into zirconia using 4 burs A (Meisinger), B (ZR2-1 experimental bur from DIATECH), C (Komet) & D (DIATECH Z-Rex, a bur designed with enhanced bonding of diamond grit to bur shank). Responses regarding cutting time, performance and wear were recorded. Results: For best cutting times and also overall performance D performed best and C the worst, with little difference between burs A and B. Bur C also performed least well for wear on the bur. Conclusion: The newly designed zirconia cutting bur DIATECH Z-Rex with enhanced bonding of diamond grit performed best in the analysis by the 35 dentists.展开更多
Based on the principle of asexual reproduction,a kind of scale breeding and reproduction technique of Ficus tikoua Bur.container seedlings was explored by using the characteristics of strong adaptability to the enviro...Based on the principle of asexual reproduction,a kind of scale breeding and reproduction technique of Ficus tikoua Bur.container seedlings was explored by using the characteristics of strong adaptability to the environment and fast growth and reproduction.Using non-woven bag as a breeding container for seedlings,the scale breeding and reproduction technique of F.tikoua container seedlings was summarized through the important links of seedling bed construction,seedling collection,soil configuration,container selection,cutting cultivation,field management,and disease and pest control.This technique can achieve differential,massive and sustainable efficient breeding and reproduction of F.tikoua seedlings in a short time.展开更多
目的:比较使用不同模式Er:YAG激光以及传统车针去龋后牙本质与复合树脂的粘接强度。方法:选用人类离体磨牙模拟龋坏,分别采用Er:YAG激光中短脉冲(medium short pulse,MSP)模式、Er:YAG激光超短脉冲(super short pulse,SSP)模式和传统车...目的:比较使用不同模式Er:YAG激光以及传统车针去龋后牙本质与复合树脂的粘接强度。方法:选用人类离体磨牙模拟龋坏,分别采用Er:YAG激光中短脉冲(medium short pulse,MSP)模式、Er:YAG激光超短脉冲(super short pulse,SSP)模式和传统车针去除模拟的龋坏后,采用自酸蚀粘接剂将牙体标本与复合树脂粘接制成试件。使用万能试验机对试件进行拉伸试验,测得断裂负荷和粘接强度,并采用单因素方差分析和Tukey多重比较进行统计学分析。采用扫描电子显微镜观察3种不同去龋方式处理后的牙本质表面形态,以及涂布自酸蚀粘接剂并固化后试件的横截面形态。结果:使用Er:YAG激光MSP模式处理后牙本质与复合树脂的粘接强度最高,SSP模式处理后次之,传统车针处理后最低,但差异无统计学意义(P>0.05)。扫描电子显微镜图像显示,Er:YAG激光MSP模式处理后的牙本质表面较平坦,牙本质小管内几乎没有残屑;Er:YAG激光SSP模式处理后的牙本质表面呈现鳞片状,牙本质小管内可见少量碎屑;而传统车针处理后牙本质小管大部分处于被表面牙本质部分甚至完全遮盖的状态,牙本质小管内充满残屑。结论:使用Er:YAG激光去龋相比传统车针去龋可以获得较好的牙本质粘接强度,且对牙本质小管的处理深度和洁净度明显优于传统车针去龋,其中MSP模式更佳。展开更多
Background: Four factors determine the quality of an implantology kit: 1) Heat generated by the drills;2) Morphology of the osteotomy according to the diameter of the implant;3) Efficiency of collecting autologous bon...Background: Four factors determine the quality of an implantology kit: 1) Heat generated by the drills;2) Morphology of the osteotomy according to the diameter of the implant;3) Efficiency of collecting autologous bone;and 4) Osteotomy execution time. Materials and Methods: This article examines the heat produced by drills during osteotomy, focusing on the effect of the following factors: drilling technique;volume of autologous bone harvested;drilling time;implant primary stability;and the percentage of osseointegrated implants after primary healing. Discussion: The four factors mentioned above are analyzed based on the data obtained for sequential, biological, and One Drill milling techniques. Conclusions: 1) One Drill is the fastest technique for performing the osteotomy;2) All techniques stay within the biological temperature range of living bone, with the lowest increase in temperature achieved using One Drill with irrigation;3) The bone harvested showed no statistically significant differences between biological milling and the One Drill technique, both far superior to the sequential technique;and 4) There is no statistically significant difference in the number of osseointegrated implants among the three techniques analyzed.展开更多
文摘Extraction of the lower third molar is one of the most common procedures performed in oral surgery. In general, impacted tooth extraction involves sectioning the tooth’s crown and roots. In order to divide the impacted tooth so that it can be extracted, high-speed air turbine drills are frequently used. However, complications related to air turbine drills may occur. In this report, we propose an alternative tooth sectioning method that obviates the need for air turbine drill use by using a low-speed straight handpiece and carbide bur. A 21-year-old female patient presented to the institute’s dental hospital complaining of symptoms localized to the left lower third molar tooth that were suggestive of impaction. After physical examination, tooth extraction of the impacted left lower third molar was proposed and the patient consented to the procedure. The crown was divided using a conventional straight low-speed handpiece and carbide bur. This carbide bur can easily cut through the enamel of crown. On post-operative day number five, suture was removed and the wound was extremely clear. This technique could minimise intra-operative time and reduce the morbidity associated with air turbine drill assisted lower third molar extraction.
基金The Amada Foundation for Metal Work Technology for the financial support
文摘Effect of thermal drilling condition on burring of 0.2C-(1.0-2.5)Si-(1.0-2.0)Mn (mass%) ultrahigh strength TRIP-aided sheet steels with polygonal ferrite matrix (TDP steels) was investigated for automotive applications.The combined rotational and downward force of the thermal drilling tool bit created friction heat.The height of the bushing was roughly 3 to 4 times the initial sheet thickness.The bushings are ideal for thread applications,as the strength of threads was significantly increased.We found that the burring and tapping contributed to the improvement of the tensile strength of 980 MPa class TRIP steel.
文摘Aim: To evaluate the comparative efficacy of Polymer bur (Smartprep) and Conventional burs (Carbide bur & Diamond Points) in selective Dentin caries removal. Materials and method: 15 freshly extracted carious human premolars and molars were selected for this study. These teeth were split in the center of carious lesion, in order to obtain two corresponding half. Thus 30 samples were prepared in this way. These were randomly divided in to 3 groups of 10 samples each. Group 1: The carious portion of these samples was excavated with the help of polymer bur Smartprep (SS White). Group 3: Prepared with Tungsten carbide round bur (No. 018). Group 3: Prepared with the help of Diamond points (No. 018). The period of time involved in this process is measured. After excavation of all carious lesions, a longitudinal section from mid most part of lesion was obtain with the help of diamond disc at slow speed. After staining with caries detector dye “Seek”, the sections were subjected to histological evaluation under stereomicro-scope. The thickness of remaining caries is measured in more or less than 1 mm. Results: The difference in grading of remaining carious dentin between Polymer bur and Conventional burs were statistically non- significant, but Polymer bur taken more time in comparison to Conventional burs. Conclusion: Smartprep bur is more conservative in selectively dentin caries removal than Conventional burs but same time it is more time consuming than Conventional burs.
文摘Objective: Zirconia is increasingly being used in restorative dentistry but its removal is often a difficult procedure due to its resistance to cutting with conventional diamond burs. Zirconia cutting burs have been developed and this study aims to compare 4 such burs. Methods: 35 experienced restorative dentists selected from our Practice Based Network (PBN) were asked to evaluate the cutting of a 1 mm groove into zirconia using 4 burs A (Meisinger), B (ZR2-1 experimental bur from DIATECH), C (Komet) & D (DIATECH Z-Rex, a bur designed with enhanced bonding of diamond grit to bur shank). Responses regarding cutting time, performance and wear were recorded. Results: For best cutting times and also overall performance D performed best and C the worst, with little difference between burs A and B. Bur C also performed least well for wear on the bur. Conclusion: The newly designed zirconia cutting bur DIATECH Z-Rex with enhanced bonding of diamond grit performed best in the analysis by the 35 dentists.
基金Supported by National Natural Science Foundation of China(32160086,32160287,31900271)Key Project of Guizhou Provincial Science and Technology Fund(QKHJC[2019]1455)+1 种基金Central Government Supporting Local Science and Technology Development Fund Project(QKZYD[2021]4010)Undergraduate Innovation and Entrepreneurship Training Program(S202110665031,S202310665002,S202310665012).
文摘Based on the principle of asexual reproduction,a kind of scale breeding and reproduction technique of Ficus tikoua Bur.container seedlings was explored by using the characteristics of strong adaptability to the environment and fast growth and reproduction.Using non-woven bag as a breeding container for seedlings,the scale breeding and reproduction technique of F.tikoua container seedlings was summarized through the important links of seedling bed construction,seedling collection,soil configuration,container selection,cutting cultivation,field management,and disease and pest control.This technique can achieve differential,massive and sustainable efficient breeding and reproduction of F.tikoua seedlings in a short time.
文摘目的:比较使用不同模式Er:YAG激光以及传统车针去龋后牙本质与复合树脂的粘接强度。方法:选用人类离体磨牙模拟龋坏,分别采用Er:YAG激光中短脉冲(medium short pulse,MSP)模式、Er:YAG激光超短脉冲(super short pulse,SSP)模式和传统车针去除模拟的龋坏后,采用自酸蚀粘接剂将牙体标本与复合树脂粘接制成试件。使用万能试验机对试件进行拉伸试验,测得断裂负荷和粘接强度,并采用单因素方差分析和Tukey多重比较进行统计学分析。采用扫描电子显微镜观察3种不同去龋方式处理后的牙本质表面形态,以及涂布自酸蚀粘接剂并固化后试件的横截面形态。结果:使用Er:YAG激光MSP模式处理后牙本质与复合树脂的粘接强度最高,SSP模式处理后次之,传统车针处理后最低,但差异无统计学意义(P>0.05)。扫描电子显微镜图像显示,Er:YAG激光MSP模式处理后的牙本质表面较平坦,牙本质小管内几乎没有残屑;Er:YAG激光SSP模式处理后的牙本质表面呈现鳞片状,牙本质小管内可见少量碎屑;而传统车针处理后牙本质小管大部分处于被表面牙本质部分甚至完全遮盖的状态,牙本质小管内充满残屑。结论:使用Er:YAG激光去龋相比传统车针去龋可以获得较好的牙本质粘接强度,且对牙本质小管的处理深度和洁净度明显优于传统车针去龋,其中MSP模式更佳。
文摘Background: Four factors determine the quality of an implantology kit: 1) Heat generated by the drills;2) Morphology of the osteotomy according to the diameter of the implant;3) Efficiency of collecting autologous bone;and 4) Osteotomy execution time. Materials and Methods: This article examines the heat produced by drills during osteotomy, focusing on the effect of the following factors: drilling technique;volume of autologous bone harvested;drilling time;implant primary stability;and the percentage of osseointegrated implants after primary healing. Discussion: The four factors mentioned above are analyzed based on the data obtained for sequential, biological, and One Drill milling techniques. Conclusions: 1) One Drill is the fastest technique for performing the osteotomy;2) All techniques stay within the biological temperature range of living bone, with the lowest increase in temperature achieved using One Drill with irrigation;3) The bone harvested showed no statistically significant differences between biological milling and the One Drill technique, both far superior to the sequential technique;and 4) There is no statistically significant difference in the number of osseointegrated implants among the three techniques analyzed.
