This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow con...This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.展开更多
In this study,the dynamic characteristics of microscale floating bubbles near the vertical wall are studied.This occurrence is common in industrial and natural phenomena.Although many studies have been conducted on mi...In this study,the dynamic characteristics of microscale floating bubbles near the vertical wall are studied.This occurrence is common in industrial and natural phenomena.Although many studies have been conducted on microscale bubbles,few studies investigate floating bubbles with very small Reynolds number(Re)near the wall,which is the main research goal of this study.Therefore,this study establishes a model for the ascent of small-scale bubbles near a vertical wall using the interFoam solver in OpenFOAM.This study investigates the influences of diverse viscosity parameters,varying distances from the wall,and different gas flow rates on the terminal velocity,deformation,and motion trajectory of bubbles.The results reveal that as liquid viscosity increases,the Re of bubbles gradually decreases and reaches a minimum of 0.012,which is similar to the Re of micrometer-sized bubbles in water.The characteristics of the wall-induced force in the longitudinal direction are closely related to the changes in liquid viscosity.Under low-viscosity conditions,the induced lift is the principal form of action,whereas under high-viscosity conditions,it is primarily manifested as induced drag.展开更多
The partial discharge occurring in the weak part of the insulation of a converter transformer results in the formation of a large number of bubbles in the insulating oil.The migration,deformation,and other dynamic beh...The partial discharge occurring in the weak part of the insulation of a converter transformer results in the formation of a large number of bubbles in the insulating oil.The migration,deformation,and other dynamic behaviors of bubbles in the region of a strong electric field can cause them to easily accumulate into“small bridges”of impurities that can lead to breakdown of the oil gap.The authors of this study experimentally investigate and discuss the mechanisms of migration and deformation of bubbles in oil during partial discharge under composite AC/DC voltage to clarify their dynamic behaviors.The influence of the initial position of the bubbles on their trajectory of migration and velocity as well as the morphological changes occurring in them are analyzed using numerical simulations.The results show that the bubbles move away from the strong electric field due to the action of the dielectrophoretic force.The interface of the bubbles is longitudinally stretched under the action of the electrostrictive force and the vertical component of the drag force and gradually recovers to assume a spherical shape under the influence of surface tension and the horizontal component of the drag force.展开更多
Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath...Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.展开更多
Separation bubbles forming on airfoils significantly influence aerodynamic behavior,particularly at low Reynolds numbers,making their accurate prediction a critical challenge in transition modelling.This study investi...Separation bubbles forming on airfoils significantly influence aerodynamic behavior,particularly at low Reynolds numbers,making their accurate prediction a critical challenge in transition modelling.This study investigates numerical modeling of a separation bubble and the effects of airfoil thickness and camber variation on the formation of the bubble dynamics at low Reynolds numbers.The numerical results were compared with the experimental results obtained from surface pressure distribution measurements,oil flow visualisation,and surface shear measurements to analyse the detailed flow behavior.The combination of pressure and flow visualisation techniques provided complementary insights,enabling a detailed characterisation of bubble formation.The results reveal that both the thickness and camber of the airfoil significantly influence the location,length,and stability of the bubble.At low Reynolds number flows(Re=0.5×10^(5)),particularly for highly cambered profiles,closer to the leading edge,separation and long bubbles were observed.As the Reynolds number increased,the separation point shifted to the leading edge,and reattachment became more likely.In numerical studies,transition models can accurately model the bubble initiation point;however,they often fail to model the bubble reattachment points accurately.This is due to the inadequacy of models that use empirical expressions for turbulence modelling,particularly in low Reynolds number flows,in their viscous modelling.In this study,it was concluded that transition onset terms,which specifically affect bubble formation,should be modified for more accurate modeling.展开更多
A CFD-based numerical model was employed to quantitatively analyze the flow characteristics of double-side-blown gas−liquid flow.Key parameters were extracted,and Spearman correlation analysis was used to quantify the...A CFD-based numerical model was employed to quantitatively analyze the flow characteristics of double-side-blown gas−liquid flow.Key parameters were extracted,and Spearman correlation analysis was used to quantify the relationships among bubble behavior,circulating flow,and liquid oscillations.The results show that periodic bubble behavior under steady injection drives the circulating flow of the liquid on both sides.The asynchronism of bubble behavior on both sides results in the alternation of circulating intensity,which significantly enhances gas−liquid mixing efficiency at certain liquid levels of 200 and 220 mm.Flow patterns of the double-side-blown process are classified into weak circulation,strong−weak alternating circulation,and strong circulation modes based on the influence of circulating flows on the penetration depth.The penetration depth in the strong−weak alternating circulation mode is generally greater than that in the single-side-blown process.The imbalance of circulating intensities on both sides primarily leads to the stable fluctuation in the injecting direction,which reveals the appearance of periodic oscillations in the molten bath.The effect of control parameters such as liquid level and gas flow rate on the liquid oscillations were discussed.展开更多
A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard...A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard k-εmodel and volume of fluid model.The bubble distribution was tracked by discrete phase model.Electromagnetic field was applied in the up-leg snorkel to enhance the effect of vacuum refining.The effect of swirling flow nozzles combined with electromagnetic stirring(EMS)on the flow characteristics of molten steel and bubble distribution was analyzed.The erosion of the up-leg snorkel was compared.The results show that when the swirling flow nozzles are used,the bubbles exhibit a distinct adherent rising behavior,and the refining efficiency decreases.In addition,the electromagnetic field can significantly improve the refining efficiency,but it brings stronger erosion to the up-leg snorkel.Nevertheless,when using the swirling flow nozzles combined with EMS,the refining performance is further optimized,and the erosion of the up-leg snorkel is also reduced due to its characteristic of bubble distribution.Compared to conventional nozzles,the mixing time was shortened by 16.2%,the recirculation rate increased by 12.5%.and the swirling intensity was strengthened by 8.9%.展开更多
High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiat...High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiation resistance.Recent experimental studies have demonstrated that W-Ta-Cr-V alloys exhibit excellent irradiation resistance under helium(He)ion irradiation.However,the underlying mechanisms,especially the migration behavior of He atoms,remain unclear.In this work,the influences of uniaxial tensile and compressive strain on He migration in W-Ta-Cr-V complex alloys have been systematically studied through first-principles calculations.Our results demonstrate that He atoms preferentially occupy the tetrahedral interstitial sites,with interstitial formation energies significantly reduced compared to pure W.The introduction of Ta,Cr,and V alloying elements markedly increases the He migration barriers,effectively suppressing He diffusion.Compressive strain increases the migration barriers,inhibiting He bubbles nucleation and growth,while tensile strain decreases the barriers,facilitating bubble formation.Compared to pure W,the W-Ta-Cr-V alloys exhibit both lower He interstitial formation energies and higher migration barriers,with further enhancement under compressive strain.Specifically,compressive strain of 6%increases the He migration barrier of the W-Ta-Cr-V alloy by 0.166 e V,which further widens the difference relative to pure W.These findings provide a theoretical explanation for the superior irradiation resistance of tungsten-based alloys observed experimentally and promote the understanding of irradiation damage in these alloys under strain.展开更多
350 keV He^(+) ions were injected into laser powder bed fusion(LPBF)-processed 304L stainless steel and traditional rolled 304L stainless steel with a flux of 1×10^(17) ions/cm^(2) at room temperature,followed by...350 keV He^(+) ions were injected into laser powder bed fusion(LPBF)-processed 304L stainless steel and traditional rolled 304L stainless steel with a flux of 1×10^(17) ions/cm^(2) at room temperature,followed by annealing at 750℃ for 10,100,and 300 h,respectively.The results showed that material swelling due to helium bubble coarsening was almost not observed in either the LPBF or rolled samples after 10 h of annealing duration.Rapid coarsening and swelling of bubbles occurred in the rolled samples,but only moderate bubble growth occurred in the LPBF sample after annealing for 100 h.After annealing for 300 h,the helium bubbles in both samples tended to grow steadily.For 10 h of annealing,the irradiated samples were in a disequilibrium state,and the apparent activation energy(E^(act))calculated by the Arrhenius model determined that helium atoms tended to diffuse through the displacement mechanism,and helium bubbles grew under the migration and coalescence(MC)mechanism.With annealing times over 100 h,the high-density dislocations and nano-oxide particles in the LPBF sample still had a strong trapping effect on the movement and growth of helium bubbles.After annealing for 300 h,the cellular subgrains in the LPBF sample decomposed,and the nano-oxide particles had no trapping effect on the helium bubbles.At this time,the dislocation structure played a primary role in suppressing the growth of helium bubbles,and the radiation resistance of the LPBF sample remained superior to that of the rolled samples.展开更多
The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab b...The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.展开更多
Legged robots have considerable potential for traversing unstructured situations;nonetheless,their inflexible frameworks often constrain adaptability and obstacle negotiation.The study article presents a revolutionary...Legged robots have considerable potential for traversing unstructured situations;nonetheless,their inflexible frameworks often constrain adaptability and obstacle negotiation.The study article presents a revolutionary Soft Tri-Legged Robot(STLR)that improves movement and obstacle-avoidance skills by using a bio-inspired pneumatic artificial muscle(Bubble Artificial Muscles)and a bio-inspired tactile sensor(TacTip).The STLR is activated by BAMs,which are flexible,pneu-matic-driven actuators that provide fine control over forward,backward,and steering movements.Obstacle identification and avoidance are facilitated by the TacTip sensor,which delivers tactile input for traversing unstructured terrains.We delineate the mechanical features of the BAMs,assess the functionality of the robot's legs,and elaborate on the incorpora-tion of the tactile sensing system.Experimental results demonstrate that the STLR can effectively achieve multi-directional flexible movement and obstacle avoidance through a cross-modal perception-actuation mechanism.This study highlights the promise of soft robotics for search and rescue,medical aid,and autonomous exploration,while delineating difficulties and opportunities for future improvements in functionality and efficiency.展开更多
The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,an...The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,and the evolution characteristics and underlying mechanisms are elucidated.The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later.The damage evolution is completely controlled by the expansion-merging of He bubbles,without nucleation–growth of voids.This new damage region can be divided into two sections,each of which exhibits a unique dominant mechanism.The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave,depending on the rate of decrease and the amplitude of the initial peak pressure.A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region,since a significant reverse velocity gradient can only be established if melting occurs.The dominant mechanism in the section distant from the loading side is the action of tensile stress,associated with the profile of the incident shock wave upon reaching the free surface,which determines the material phase near the free surface.Moreover,the presence of He bubbles is another critical factor for formation of the new damage region,which does not occur in pure Al samples.展开更多
The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstru...The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.展开更多
Hydrogel microcapsules are powerful microreactor vessels that have attracted widespread attention and research.Among the various methods for their generation,the aqueous two-phase system(ATPS)is by far the most straig...Hydrogel microcapsules are powerful microreactor vessels that have attracted widespread attention and research.Among the various methods for their generation,the aqueous two-phase system(ATPS)is by far the most straightforward approach.However,the high viscosity of ATPS solutions significantly limits the generation throughput of hydrogel microcapsule.In this study,we developed a novel high-throughput approach for generating hydrogel microcapsules using a microfluidic bubble-triggering strategy.By integrating constant-pressure air flow with droplet microfluidics devices,we efficiently manipulated the formation of ATPS droplet through bubble-induced Rayleigh-Plateau instability,enabling the production of uniform,monodisperse microcapsules.Additionally,the droplet generation frequency in the bubble-triggering method exceeded 36 kHz.We further demonstrated the encapsulation of genetically engineered Escherichia coli strains,which acted as biosensors for arsenic ions and caprolactam,highlighting the potential of these microcapsules for biosensing applications.This advancement in hydrogel microcapsule generation offers promising implications for scalable applications in biosensing,organoid culture,and high-throughput screening.展开更多
In this paper,the failure caused by HRAM loads which were generated by high-speed projectile penetration,and protection technology of the fluid-filled structure were explored.A bubble was preset on the projectile traj...In this paper,the failure caused by HRAM loads which were generated by high-speed projectile penetration,and protection technology of the fluid-filled structure were explored.A bubble was preset on the projectile trajectory in a fluid-filled structure.Based on the reflection and transmission phenomena of pressure waves at the gas-liquid interface and the compressibility characteristics of gases,a numerical analysis was conducted on the influence of preset bubble on projectile penetration and structural failure characteristics.The results indicate that the secondary water-entry impact phenomenon occurs when a preset bubble exists on the projectile trajectory,leading to the secondary water entry impact loads.The rarefaction waves reflected on the surface of the preset bubble cause the attenuation ratio of the initial impact pressure peak to reach 68.8%and the total specific impulse attenuation ratio to reach 48.6%.Furthermore,the larger the bubble,the faster the projectile,and the more obvious the attenuation effect.Moreover,due to the compressibility of the bubble,the global deformation attenuation ratio of the front and rear walls can reach over 80%.However,the larger the bubble size,the faster the projectile velocity,the smaller the local deformation attenuation effect of the rear wall,and the more severe the failure at the perforation of the rear wall.展开更多
This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signa...This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signals and degrade positioning accuracy.Managed by the Indonesian Geospatial Information Agency(BIG),the Indonesia Continuously Operating Reference Station(Ina-CORS)network comprises over 300 GNSS receivers spanning equatorial to southern low-latitude regions.Ina-CORS is uniquely situated to monitor EPB generation,zonal drift,and dissipation across Southeast Asia.We provide a practical tool for EPB research,by sharing two-dimensional rate of Total Electron Content(TEC)change index(ROTI)derived from this network.We generate ROTI maps with a 10-minute resolution,and samples from May 2024 are publicly available for further scientific research.Two preliminary findings from the ROTI maps of Ina-CORS are noteworthy.First,the Ina-CORS ROTI maps reveal that the irregularities within a broader EPB structure persist longer,increasing the potential for these irregularities to migrate farther eastward.Second,we demonstrate that combined ROTI maps from Ina-CORS and GNSS receivers in East Asia and Australia can be used to monitor the development of ionospheric irregularities in Southeast and East Asia.We have demonstrated the combined ROTI maps to capture the development of ionospheric irregularities in the Southeast/East Asian sector during the G5 Geomagnetic Storm on May 11,2024.We observed simultaneous ionospheric irregularities in Japan and Australia,respectively propagating northwestward and southwestward,before midnight,whereas Southeast Asia’s equatorial and low-latitude regions exhibited irregularities post-midnight.By sharing ROTI maps from Indonesia and integrating them with regional GNSS networks,researchers can conduct comprehensive EPB studies,enhancing the understanding of EPB behavior across Southeast and East Asia and contributing significantly to ionospheric research.展开更多
Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is p...Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is proposed to examine the evolution of high-burn-up structures in polycrystalline UO_(2).The formation and growth of recrystallized grains were initially investigated.It was demonstrated that recrystallization kinetics adhere to the Kolmogorov–Johnson–Mehl–Avrami(KJMA)equation,and that recrystallization represents a process of free-energy reduction.Subsequently,the microstructural evolution in UO_(2) was analyzed as the burn up increased.Gas bubbles acted as additional nucleation sites,thereby augmenting the recrystallization kinetics,whereas the presence of recrystallized grains accelerated bubble growth by increasing the number of grain boundaries.The observed variations in the recrystallization kinetics and porosity with burn-up closely align with experimental findings.Furthermore,the influence of grain size on microstructure evolution was investigated.Larger grain sizes were found to decrease porosity and the occurrence of high-burn-up structures.展开更多
Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show ...Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.展开更多
In recent years,the phenomenon of multistability has attracted wide attention.In this paper,a memristive chaotic system with extreme multistability is constructed by using a memristor.The dynamic behavior of the syste...In recent years,the phenomenon of multistability has attracted wide attention.In this paper,a memristive chaotic system with extreme multistability is constructed by using a memristor.The dynamic behavior of the system is analyzed by Poincar´e mapping,a time series diagram,and a bifurcation diagram.The results show that the new system has several significant characteristics.First,the new system has a constant Lyapunov exponent,transient chaos and one complete Feigenbaum tree.Second,the system has the phenomenon of bifurcation map shifts that depend on the initial conditions.In addition,we find periodic bursting oscillations,chaotic bursting oscillations,and the transition of chaotic bursting oscillations to periodic bursting oscillations.In particular,when the system parameters take different discrete values,the system generates a bubble phenomenon that varies with the initial conditions,and this bubble can be shifted with the initial values,which has rarely been seen in the previous literature.The implementation by field-programmable gate array(FPGA)and analog circuit simulation show close alignment with the MATLAB numerical simulation results,validating the system’s realizability.Additionally,the image encryption algorithm integrating DNA-based encoding and chaotic systems further demonstrates its practical applicability.展开更多
基金the Scientific Research Projects Unit of Erciyes University under contract no:FDS-2022-11532 and FOA-2025-14773.
文摘This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.
基金Supported by the National Natural Science Foundation of China(Grant No.52271319)the Jiangsu Funding Program for Excellent Postdoctoral Talent,and the Postdoctoral Fellowship Program of China Postdoctoral Science Foundation(Grant No.GZC20240618)the Natural Science Foundation of Jiangsu Province of China(BK20231525).
文摘In this study,the dynamic characteristics of microscale floating bubbles near the vertical wall are studied.This occurrence is common in industrial and natural phenomena.Although many studies have been conducted on microscale bubbles,few studies investigate floating bubbles with very small Reynolds number(Re)near the wall,which is the main research goal of this study.Therefore,this study establishes a model for the ascent of small-scale bubbles near a vertical wall using the interFoam solver in OpenFOAM.This study investigates the influences of diverse viscosity parameters,varying distances from the wall,and different gas flow rates on the terminal velocity,deformation,and motion trajectory of bubbles.The results reveal that as liquid viscosity increases,the Re of bubbles gradually decreases and reaches a minimum of 0.012,which is similar to the Re of micrometer-sized bubbles in water.The characteristics of the wall-induced force in the longitudinal direction are closely related to the changes in liquid viscosity.Under low-viscosity conditions,the induced lift is the principal form of action,whereas under high-viscosity conditions,it is primarily manifested as induced drag.
基金supported by the National Natural Science Foundation of China(No.U1966209)the State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources(NCEPU,LAPS22001).
文摘The partial discharge occurring in the weak part of the insulation of a converter transformer results in the formation of a large number of bubbles in the insulating oil.The migration,deformation,and other dynamic behaviors of bubbles in the region of a strong electric field can cause them to easily accumulate into“small bridges”of impurities that can lead to breakdown of the oil gap.The authors of this study experimentally investigate and discuss the mechanisms of migration and deformation of bubbles in oil during partial discharge under composite AC/DC voltage to clarify their dynamic behaviors.The influence of the initial position of the bubbles on their trajectory of migration and velocity as well as the morphological changes occurring in them are analyzed using numerical simulations.The results show that the bubbles move away from the strong electric field due to the action of the dielectrophoretic force.The interface of the bubbles is longitudinally stretched under the action of the electrostrictive force and the vertical component of the drag force and gradually recovers to assume a spherical shape under the influence of surface tension and the horizontal component of the drag force.
基金supported by the National Natural Science Foundation of China(Grant No.52374317).
文摘Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.
基金the Scientific and Technological Research Council of Turkey(TÜB˙ITAK)for support under project number:122M826to the Scientific Research Projects Unit of Erciyes University under contract No.:FYL-2023-13162 and FYL-2024-13701.
文摘Separation bubbles forming on airfoils significantly influence aerodynamic behavior,particularly at low Reynolds numbers,making their accurate prediction a critical challenge in transition modelling.This study investigates numerical modeling of a separation bubble and the effects of airfoil thickness and camber variation on the formation of the bubble dynamics at low Reynolds numbers.The numerical results were compared with the experimental results obtained from surface pressure distribution measurements,oil flow visualisation,and surface shear measurements to analyse the detailed flow behavior.The combination of pressure and flow visualisation techniques provided complementary insights,enabling a detailed characterisation of bubble formation.The results reveal that both the thickness and camber of the airfoil significantly influence the location,length,and stability of the bubble.At low Reynolds number flows(Re=0.5×10^(5)),particularly for highly cambered profiles,closer to the leading edge,separation and long bubbles were observed.As the Reynolds number increased,the separation point shifted to the leading edge,and reattachment became more likely.In numerical studies,transition models can accurately model the bubble initiation point;however,they often fail to model the bubble reattachment points accurately.This is due to the inadequacy of models that use empirical expressions for turbulence modelling,particularly in low Reynolds number flows,in their viscous modelling.In this study,it was concluded that transition onset terms,which specifically affect bubble formation,should be modified for more accurate modeling.
基金financial support for this research work from the National Key Research and Development Program of China(No.2022YFB3304901)。
文摘A CFD-based numerical model was employed to quantitatively analyze the flow characteristics of double-side-blown gas−liquid flow.Key parameters were extracted,and Spearman correlation analysis was used to quantify the relationships among bubble behavior,circulating flow,and liquid oscillations.The results show that periodic bubble behavior under steady injection drives the circulating flow of the liquid on both sides.The asynchronism of bubble behavior on both sides results in the alternation of circulating intensity,which significantly enhances gas−liquid mixing efficiency at certain liquid levels of 200 and 220 mm.Flow patterns of the double-side-blown process are classified into weak circulation,strong−weak alternating circulation,and strong circulation modes based on the influence of circulating flows on the penetration depth.The penetration depth in the strong−weak alternating circulation mode is generally greater than that in the single-side-blown process.The imbalance of circulating intensities on both sides primarily leads to the stable fluctuation in the injecting direction,which reveals the appearance of periodic oscillations in the molten bath.The effect of control parameters such as liquid level and gas flow rate on the liquid oscillations were discussed.
基金support from the National Natural Science Foundation of China(No.52174305).
文摘A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard k-εmodel and volume of fluid model.The bubble distribution was tracked by discrete phase model.Electromagnetic field was applied in the up-leg snorkel to enhance the effect of vacuum refining.The effect of swirling flow nozzles combined with electromagnetic stirring(EMS)on the flow characteristics of molten steel and bubble distribution was analyzed.The erosion of the up-leg snorkel was compared.The results show that when the swirling flow nozzles are used,the bubbles exhibit a distinct adherent rising behavior,and the refining efficiency decreases.In addition,the electromagnetic field can significantly improve the refining efficiency,but it brings stronger erosion to the up-leg snorkel.Nevertheless,when using the swirling flow nozzles combined with EMS,the refining performance is further optimized,and the erosion of the up-leg snorkel is also reduced due to its characteristic of bubble distribution.Compared to conventional nozzles,the mixing time was shortened by 16.2%,the recirculation rate increased by 12.5%.and the swirling intensity was strengthened by 8.9%.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11505003 and 52325103)the Anhui Provincial Natural Science Foundation(Grant No.2108085MA25)。
文摘High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiation resistance.Recent experimental studies have demonstrated that W-Ta-Cr-V alloys exhibit excellent irradiation resistance under helium(He)ion irradiation.However,the underlying mechanisms,especially the migration behavior of He atoms,remain unclear.In this work,the influences of uniaxial tensile and compressive strain on He migration in W-Ta-Cr-V complex alloys have been systematically studied through first-principles calculations.Our results demonstrate that He atoms preferentially occupy the tetrahedral interstitial sites,with interstitial formation energies significantly reduced compared to pure W.The introduction of Ta,Cr,and V alloying elements markedly increases the He migration barriers,effectively suppressing He diffusion.Compressive strain increases the migration barriers,inhibiting He bubbles nucleation and growth,while tensile strain decreases the barriers,facilitating bubble formation.Compared to pure W,the W-Ta-Cr-V alloys exhibit both lower He interstitial formation energies and higher migration barriers,with further enhancement under compressive strain.Specifically,compressive strain of 6%increases the He migration barrier of the W-Ta-Cr-V alloy by 0.166 e V,which further widens the difference relative to pure W.These findings provide a theoretical explanation for the superior irradiation resistance of tungsten-based alloys observed experimentally and promote the understanding of irradiation damage in these alloys under strain.
基金supported by the National Natural Science Foundation of China(Nos.U22B2067 and 52073176).
文摘350 keV He^(+) ions were injected into laser powder bed fusion(LPBF)-processed 304L stainless steel and traditional rolled 304L stainless steel with a flux of 1×10^(17) ions/cm^(2) at room temperature,followed by annealing at 750℃ for 10,100,and 300 h,respectively.The results showed that material swelling due to helium bubble coarsening was almost not observed in either the LPBF or rolled samples after 10 h of annealing duration.Rapid coarsening and swelling of bubbles occurred in the rolled samples,but only moderate bubble growth occurred in the LPBF sample after annealing for 100 h.After annealing for 300 h,the helium bubbles in both samples tended to grow steadily.For 10 h of annealing,the irradiated samples were in a disequilibrium state,and the apparent activation energy(E^(act))calculated by the Arrhenius model determined that helium atoms tended to diffuse through the displacement mechanism,and helium bubbles grew under the migration and coalescence(MC)mechanism.With annealing times over 100 h,the high-density dislocations and nano-oxide particles in the LPBF sample still had a strong trapping effect on the movement and growth of helium bubbles.After annealing for 300 h,the cellular subgrains in the LPBF sample decomposed,and the nano-oxide particles had no trapping effect on the helium bubbles.At this time,the dislocation structure played a primary role in suppressing the growth of helium bubbles,and the radiation resistance of the LPBF sample remained superior to that of the rolled samples.
基金supported by a grant from China railway corporation science and technology research and development plan project(Grant No.2017G005-B)funding support by Wuyi University’s Hong Kong and Macao Joint Research and Development Fund(Grants No.2021WGALH15)funding support by the Innovation and Technology Commission of Hong Kong SAR Government to the Hong Kong Branch of National Rail Transit Electrification and Automation Engineering Technology Research Center(Grant No.K-BBY1).
文摘The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.
基金the Natural Science Foundation of China(Project for Young Scientists:Grant No.52105010,Regular Project:Grant No.62173096)Natural Science Foundationof Guangdong Province(Regular Project:Grant No.2025A1515012124,Grant No.2022A1515010327)Guangdong-Hong Kong-Macao Key Laboratory of Multi-scaleInformation Fusion and Collaborative Optimization Control Manufacturing Process.
文摘Legged robots have considerable potential for traversing unstructured situations;nonetheless,their inflexible frameworks often constrain adaptability and obstacle negotiation.The study article presents a revolutionary Soft Tri-Legged Robot(STLR)that improves movement and obstacle-avoidance skills by using a bio-inspired pneumatic artificial muscle(Bubble Artificial Muscles)and a bio-inspired tactile sensor(TacTip).The STLR is activated by BAMs,which are flexible,pneu-matic-driven actuators that provide fine control over forward,backward,and steering movements.Obstacle identification and avoidance are facilitated by the TacTip sensor,which delivers tactile input for traversing unstructured terrains.We delineate the mechanical features of the BAMs,assess the functionality of the robot's legs,and elaborate on the incorpora-tion of the tactile sensing system.Experimental results demonstrate that the STLR can effectively achieve multi-directional flexible movement and obstacle avoidance through a cross-modal perception-actuation mechanism.This study highlights the promise of soft robotics for search and rescue,medical aid,and autonomous exploration,while delineating difficulties and opportunities for future improvements in functionality and efficiency.
基金supported by the National Natural Science Foundation of China(Grant No.12172063).
文摘The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,and the evolution characteristics and underlying mechanisms are elucidated.The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later.The damage evolution is completely controlled by the expansion-merging of He bubbles,without nucleation–growth of voids.This new damage region can be divided into two sections,each of which exhibits a unique dominant mechanism.The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave,depending on the rate of decrease and the amplitude of the initial peak pressure.A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region,since a significant reverse velocity gradient can only be established if melting occurs.The dominant mechanism in the section distant from the loading side is the action of tensile stress,associated with the profile of the incident shock wave upon reaching the free surface,which determines the material phase near the free surface.Moreover,the presence of He bubbles is another critical factor for formation of the new damage region,which does not occur in pure Al samples.
基金supported by the National Natural Science Foundation of China(Nos.52105330,52175307)the Natural Science Foundation of Shandong Province,China(No.ZR2023JQ021)。
文摘The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.
基金sponsored by the National Key R&D Program of China(no.2023YFB3208203)the National Natural Science Foundation of China(no.62374170)the Science and Technology Commission of Shanghai Municipality(no.23J21900200).
文摘Hydrogel microcapsules are powerful microreactor vessels that have attracted widespread attention and research.Among the various methods for their generation,the aqueous two-phase system(ATPS)is by far the most straightforward approach.However,the high viscosity of ATPS solutions significantly limits the generation throughput of hydrogel microcapsule.In this study,we developed a novel high-throughput approach for generating hydrogel microcapsules using a microfluidic bubble-triggering strategy.By integrating constant-pressure air flow with droplet microfluidics devices,we efficiently manipulated the formation of ATPS droplet through bubble-induced Rayleigh-Plateau instability,enabling the production of uniform,monodisperse microcapsules.Additionally,the droplet generation frequency in the bubble-triggering method exceeded 36 kHz.We further demonstrated the encapsulation of genetically engineered Escherichia coli strains,which acted as biosensors for arsenic ions and caprolactam,highlighting the potential of these microcapsules for biosensing applications.This advancement in hydrogel microcapsule generation offers promising implications for scalable applications in biosensing,organoid culture,and high-throughput screening.
文摘In this paper,the failure caused by HRAM loads which were generated by high-speed projectile penetration,and protection technology of the fluid-filled structure were explored.A bubble was preset on the projectile trajectory in a fluid-filled structure.Based on the reflection and transmission phenomena of pressure waves at the gas-liquid interface and the compressibility characteristics of gases,a numerical analysis was conducted on the influence of preset bubble on projectile penetration and structural failure characteristics.The results indicate that the secondary water-entry impact phenomenon occurs when a preset bubble exists on the projectile trajectory,leading to the secondary water entry impact loads.The rarefaction waves reflected on the surface of the preset bubble cause the attenuation ratio of the initial impact pressure peak to reach 68.8%and the total specific impulse attenuation ratio to reach 48.6%.Furthermore,the larger the bubble,the faster the projectile,and the more obvious the attenuation effect.Moreover,due to the compressibility of the bubble,the global deformation attenuation ratio of the front and rear walls can reach over 80%.However,the larger the bubble size,the faster the projectile velocity,the smaller the local deformation attenuation effect of the rear wall,and the more severe the failure at the perforation of the rear wall.
基金JSPS KAKENHI Grant Number16H06286 supports global GNSS ionospheric maps (TEC,ROTI,and detrended TEC maps) developed by the Institute for SpaceEarth Environmental Research (ISEE) of Nagoya Universitysupport of the 2024 JASSO Follow-up Research Fellowship Program for a 90-day visiting research at the Institute for Space-Earth Environmental Research (ISEE),Nagoya University+3 种基金the support received from Telkom University under the“Skema Penelitian Terapan Periode I Tahun Anggaran 2024”the Memorandum of Understanding for Research Collaboration on Regional Ionospheric Observation (No:092/SAM3/TE-DEK/2021)the National Institute of Information and Communications Technology (NICT) International Exchange Program 2024-2025(No.2024-007)support for a one-year visiting research at Hokkaido University
文摘This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signals and degrade positioning accuracy.Managed by the Indonesian Geospatial Information Agency(BIG),the Indonesia Continuously Operating Reference Station(Ina-CORS)network comprises over 300 GNSS receivers spanning equatorial to southern low-latitude regions.Ina-CORS is uniquely situated to monitor EPB generation,zonal drift,and dissipation across Southeast Asia.We provide a practical tool for EPB research,by sharing two-dimensional rate of Total Electron Content(TEC)change index(ROTI)derived from this network.We generate ROTI maps with a 10-minute resolution,and samples from May 2024 are publicly available for further scientific research.Two preliminary findings from the ROTI maps of Ina-CORS are noteworthy.First,the Ina-CORS ROTI maps reveal that the irregularities within a broader EPB structure persist longer,increasing the potential for these irregularities to migrate farther eastward.Second,we demonstrate that combined ROTI maps from Ina-CORS and GNSS receivers in East Asia and Australia can be used to monitor the development of ionospheric irregularities in Southeast and East Asia.We have demonstrated the combined ROTI maps to capture the development of ionospheric irregularities in the Southeast/East Asian sector during the G5 Geomagnetic Storm on May 11,2024.We observed simultaneous ionospheric irregularities in Japan and Australia,respectively propagating northwestward and southwestward,before midnight,whereas Southeast Asia’s equatorial and low-latitude regions exhibited irregularities post-midnight.By sharing ROTI maps from Indonesia and integrating them with regional GNSS networks,researchers can conduct comprehensive EPB studies,enhancing the understanding of EPB behavior across Southeast and East Asia and contributing significantly to ionospheric research.
基金supported by the National Natural Science Foundation of China(Grant Nos.U20B2013 and 12205286)the National Key Research and Development Program of China(Grant No.2022YFB1902401)。
文摘Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is proposed to examine the evolution of high-burn-up structures in polycrystalline UO_(2).The formation and growth of recrystallized grains were initially investigated.It was demonstrated that recrystallization kinetics adhere to the Kolmogorov–Johnson–Mehl–Avrami(KJMA)equation,and that recrystallization represents a process of free-energy reduction.Subsequently,the microstructural evolution in UO_(2) was analyzed as the burn up increased.Gas bubbles acted as additional nucleation sites,thereby augmenting the recrystallization kinetics,whereas the presence of recrystallized grains accelerated bubble growth by increasing the number of grain boundaries.The observed variations in the recrystallization kinetics and porosity with burn-up closely align with experimental findings.Furthermore,the influence of grain size on microstructure evolution was investigated.Larger grain sizes were found to decrease porosity and the occurrence of high-burn-up structures.
基金funded by the National Natural Science Founda-tion of China(52071109).
文摘Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.
基金Project supported by the Natural Science Foundation of Hubei Province(Grant No.2024AFD068).
文摘In recent years,the phenomenon of multistability has attracted wide attention.In this paper,a memristive chaotic system with extreme multistability is constructed by using a memristor.The dynamic behavior of the system is analyzed by Poincar´e mapping,a time series diagram,and a bifurcation diagram.The results show that the new system has several significant characteristics.First,the new system has a constant Lyapunov exponent,transient chaos and one complete Feigenbaum tree.Second,the system has the phenomenon of bifurcation map shifts that depend on the initial conditions.In addition,we find periodic bursting oscillations,chaotic bursting oscillations,and the transition of chaotic bursting oscillations to periodic bursting oscillations.In particular,when the system parameters take different discrete values,the system generates a bubble phenomenon that varies with the initial conditions,and this bubble can be shifted with the initial values,which has rarely been seen in the previous literature.The implementation by field-programmable gate array(FPGA)and analog circuit simulation show close alignment with the MATLAB numerical simulation results,validating the system’s realizability.Additionally,the image encryption algorithm integrating DNA-based encoding and chaotic systems further demonstrates its practical applicability.
